G3PA-420B-VD DC12-24 - Omron Automation and Safety

CSM_G3PA_DS_E_3_2

Solid State Relays

G3PA

Extremely Thin Relays Integrated with Heat

Sinks

• Downsizing achieved through optimum design of heat sink.

• Mounting possible via screws or via DIN track.

• Close mounting possible for linking terminals. (Except for G3PA-

260B-VD and G3PA-450B-VD-2.)

• Applicable with 3-phase loads.

• Replaceable power element cartridges.

• Comply with VDE 0160 (finger protection), with a dielectric

strength of 4,000 V between input and load.

• Certified by UL, CSA, and VDE (reinforced insulation).

Refer to Safety Precautions for All Solid State

Relays.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Model Number Structure

■Model Number Legend

1. Basic Model Name

G3PA: Solid State Relay

2. Rated Load Power Supply Voltage

2: 200 VAC

4: 400 VAC

3. Rated Load Current

10: 10 A

20: 20 A

30: 30 A

40: 40 A

50: 50 A

60: 60 A

4. Terminal Type

B: Screw terminals

5. Zero Cross Function

Blank: Equipped with zero cross function

L: Not equipped with zero cross function

6. Certification

VD: Certified by UL, CSA, and VDE

7. Special Specifications

Blank: Standard models

2: 480-V models

1234567

G3PA-@@@@-@-@

G3PA

Ordering Information

■List of Models

Note: When ordering, specify the rated input voltage.

Replacement Parts

■Other Units (Order Separately)

Units that Enable 2-line Switching of 3-phase Power

Note: Refer to List of Certified Models for a list of products that comply with safety standards.

Model Isolation Zero cross function Indicator Rated output load Rated input voltage

G3PA-210B-VD Phototriac

coupler Yes Yes 10 A at 24 to 240 VAC 5 to 24 VDC

G3PA-220B-VD 20 A at 24 to 240 VAC

G3PA-240B-VD 40 A at 24 to 240 VAC

G3PA-260B-VD 60 A at 24 to 240 VAC

G3PA-210BL-VD No 10 A at 24 to 240 VAC

G3PA-220BL-VD 20 A at 24 to 240 VAC

G3PA-240BL-VD 40 A at 24 to 240 VAC

G3PA-260BL-VD 60 A at 24 to 240 VAC

G3PA-210B-VD Yes 10 A at 24 to 240 VAC 24 VAC

G3PA-220B-VD 20 A at 24 to 240 VAC

G3PA-240B-VD 40 A at 24 to 240 VAC

G3PA-260B-VD 60 A at 24 to 240 VAC

G3PA-420B-VD 20 A at 180 to 400 VAC 12 to 24 VDC

G3PA-430B-VD 30 A at 180 to 400 VAC

G3PA-420B-VD-2 20 A at 200 to 480 VAC

G3PA-430B-VD-2 30 A at 200 to 480 VAC

G3PA-450B-VD-2 50 A at 200 to 480 VAC

Name Carry current Load voltage range Model Applicable SSR VDE

certification

Power Device

Cartridge

10 A 19 to 264 VAC G32A-A10-VD DC5-24 G3PA-210B-VD DC5-24 Yes

G32A-A10L-VD DC5-24 G3PA-210BL-VD DC5-24

G32A-A10-VD AC24 G3PA-210B-VD AC24

20 A G32A-A20-VD DC5-24 G3PA-220B-VD DC5-24

G32A-A20L-VD DC5-24 G3PA-220BL-VD DC5-24

G32A-A20-VD AC24 G3PA-220B-VD AC24

40 A G32A-A40-VD DC5-24 G3PA-240B-VD DC5-24

G32A-A40L-VD DC5-24 G3PA-240BL-VD DC5-24

G32A-A40-VD AC24 G3PA-240B-VD AC24

60 A G32A-A60-VD DC5-24 G3PA-260B-VD DC5-24

G32A-A60L-VD DC5-24 G3PA-260BL-VD DC5-24

G32A-A60-VD AC24 G3PA-260B-VD AC24

20 A 150 to 440 VAC G32A-A420-VD DC12-24 G3PA-420B-VD DC12-24

30 A G32A-A430-VD DC12-24 G3PA-430B-VD DC12-24

20 A 180 to 528 VAC G32A-A420-VD-2 DC12-24 G3PA-420B-VD-2 DC12-24

30 A G32A-A430-VD-2 DC12-24 G3PA-430B-VD-2 DC12-24

50 A G32A-A450-VD-2 DC12-24 G3PA-450B-VD-2 DC12-24

Name Current flow Model Applicable SSR

Short-circuit Unit 10 A G32A-D20 G3PA-210B-VD, G3PA-210BL-VD

20 A G3PA-220B-VD, G3PA-220BL-VD

G3PA-420B-VD, G3PA-420B-VD-2

30 A G32A-D40 G3PA-430B-VD, G3PA-430B-VD-2

40 A G3PA-240B-VD, G3PA-240BL-VD

G3PA

Specifications

■Ratings (at an Ambient Temperature of 25°C)

Input

Output

Refer to Engineering Data for further details.

Model Rated voltage Operating Voltage

range

Input current

impedance

Voltage level

Must operate voltage Must release voltage

G3PA-210B-VD 5 to 24 VDC 4 to 30 VDC 7 mA max. 4 VDC max. 1 VDC min.

G3PA-220B-VD

G3PA-240B-VD

G3PA-260B-VD

G3PA-210BL-VD 5 to 24 VDC 4 to 30 VDC 20 mA max. 4 VDC max. 1 VDC min.

G3PA-220BL-VD

G3PA-240BL-VD

G3PA-260BL-VD

G3PA-210B-VD 24 VAC 19.2 to 26.4 VAC 1.4 kΩ±20% 19.2 VAC max. 4.8 VAC min.

G3PA-220B-VD

G3PA-240B-VD

G3PA-260B-VD

G3PA-420B-VD 12 to 24 VDC 9.6 to 30 VDC 7 mA max. 9.2 VDC max. 1 VDC min.

G3PA-430B-VD

G3PA-420B-VD-2

G3PA-430B-VD-2

G3PA-450B-VD-2

Model Rated load voltage Load voltage range Load current Inrush current VDRM

(reference value)

G3PA-210B(L)-VD

24 to 240 VAC (50/60 Hz) 19 to 264 VAC (50/60 Hz) 0.1 to 10 A at 40°C 150 A (60 Hz, 1 cycle) 600 V (V

DRM

)

G3PA-220B(L)-VD

0.1 to 20 A at 40°C 220 A (60 Hz, 1 cycle)

G3PA-240B(L)-VD

0.5 to 40 A at 40°C 440 A (60 Hz, 1 cycle)

G3PA-260B(L)-VD

0.5 to 60 A at 40°C 440 A (60 Hz, 1 cycle)

G3PA-420B-VD

180 to 400 VAC (50/60 Hz) 150 to 440 VAC (50/60 Hz) 0.5 to 20 A at 30°C 220 A (60 Hz, 1 cycle) 1,000 V (V

DRM

)

G3PA-430B-VD

0.5 to 30 A at 30°C 440 A (60 Hz, 1 cycle)

G3PA-420B-VD-2

200 to 480 VAC (50/60 Hz) 180 to 528 VAC (50/60 Hz) 0.5 to 20 A at 30°C 220 A (60 Hz, 1 cycle) 1,200 V (V

DRM

)

G3PA-430B-VD-2

0.5 to 30 A at 30°C 440 A (60 Hz, 1 cycle)

G3PA-450B-VD-2

0.5 to 50 A at 30°C 440 A (60 Hz, 1 cycle)

G3PA

■Characteristics

Item G3PA-

210B(L)-VD

G3PA-

220B(L)-VD

G3PA-

240B(L)-VD

G3PA-

260B(L)-VD

G3PA-

420B-VD

G3PA-

420B-VD-2

G3PA-

430B-VD

G3PA-

430B-VD-2

G3PA-

450B-VD-2

Operate time 1/2 of load power source cycle + 1 ms max. (DC Input, -B models)

1 1/2 of load power source cycle + 1 ms max. (AC Input)

1 ms max. (-BL models)

Release time 1/2 of load power source cycle + 1 ms max. (DC Input)

1 1/2 of load power source cycle + 1 ms max. (AC Input)

Output ON

voltage drop

1.6 V (RMS) max. 1.8 V (RMS) max.

Leakage

current

5 mA max. (at 100 VAC)

10 mA max. (at 200 VAC)

10 mA max. (at 100 VAC)

20 mA max. (at 200 VAC)

20 mA max.

(at 400 VAC)

20 mA max.

(at 480 VAC)

20 mA max.

(at 400 VAC)

20 mA max. (at 480 VAC)

I2t 260 A2s 1,260 A2s 260 A2s 1,800 A2s 1,800 A2s 1,800 A2s

Insulation

resistance

100 MΩ min. (at 500 VDC)

Dielectric

strength

4,000 VAC, 50/60 Hz for 1 min

Vibration

resistance

Destruction: 10 to 55 to 10 Hz, 0.375–mm single amplitude (Mounted to DIN track)

Shock

resistance Destruction: 300 m/s2 (mounted to DIN track)

Ambient

temperature

Operating: –30°C to 80°C (with no icing or condensation)

Storage: –30°C to 100°C (with no icing or condensation)

Certified

standards

UL508, CSA C22.2 (No.14, No.950), EN60950-1 File No.

5915ÜG

UL508,

CSA C22.2

(No.14),

EN60947-4-3

File No.

6642ÜG

UL508,

CSA C22.2

(No.14),

EN60947-4-3

File No.

133127ÜG

UL508,

CSA C22.2

(No.14),

EN60947-4-3

File No.

6642ÜG

UL508, CSA C22.2

(No.14), EN60947-4-3

File No. 133127ÜG

EMC Emission: EN55011 Group 1 Class A

Immunity: EN61000-6-2

Ambient

humidity

Operating: 45% to 85%

Weight Approx.

260 g

Approx.

340 g

Approx.

460 g

Approx.

900 g

Approx.

290 g

Approx.

290 g

Approx.

410 g

Approx.

410 g

Approx.

900 g

G3PA

Operation

■Replacement Parts

G32A-A Power Device Cartridge

The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red,

the triac circuitry may have malfunctioned possibly by an excessive flow of current, in which case, dismount the damaged cartridge for replacement.

The damaged cartridge can be replaced with a new one without disconnecting the wires from the G3PA.

Improve the heat radiation efficiency of the G3PA before replacing the cartridge.

The G32A-A Power Device Cartridge can withstand an excessive current for a short period of time, such as may be caused accidentally by the

short circuitry of the load, in which case the temperature indicator will not turn red.

Be sure to turn OFF the power supply when replacing the Cartridge. Supplying power with the Cartridge removed may result in malfunction.

To remove or replace the Power Device Cartridge for the G3PA-210B-VD, G3PA-220B-VD, or G3PA-420B-VD(-2), use the special tool provided

with it for extraction. (No special tool is required for other models.)

The G3PA can be broadly divided into two series: Previous models and models with model numbers that end with "-VD." The Cartridge shown at

the right cannot be mounted to models in the G3PA-@@@B-(-US) Series.

Appearance

Replacing Power Device Cartridges

When replacing Power Device Cartridges, use the specified model. Using a Power Device Cartridge other than the specified one will result in faulty

operation and destruction of the elements.

G32A-A10(L)-VD G32A-A20(L)-VD G32A-A40(L)-VD G32A-A60(L)-VD

G32A-A420-VD(-2) G32A-A430-VD(-2) G32A-A450-VD-2

G3PA

■Replacement Procedure

G32A-A10(L)-VD/G32A-A20(L)-VD/G32-A420-VD(-2)

To remove or replace the Power Device Cartridge, use the special tool provided with it for extraction.

(Do not switch on the power without the Power Device Cartridge. For details, see the attached the instruction sheet with the product.)

Extraction

Follow the procedures below to dismount the Power Device

Cartridge from the G3PA.

1. Switch off the power.

2. Remove the terminal cover.

3. Hook the indented part of the cartridge with the tool and pull up

on the cartridge to remove it.

Mounting

Follow the procedures below to mount the Power Device Cartridge

on the G3PA.

1. Apply silicone grease (provided with the G32A-A) to the entire

surface of the heat sink.

2. Make sure that there is no dust or pieces of wire on the heat sink

of the G32A-A or the G3PA.

3. Insert the cartridge into the opening of the G3PA so that the

letters on the cartridge and those on the G3PA are in the same

direction and side A and side B are even.

4. Attach the terminal cover.

5. Switch on the power and check the G3PA to be sure it works

properly.

G32A-A40(L)-VD/G32A-A60(L)-VD/G32A-A430-VD(-2)/G32A-A450-VD-2

The G32A Power Device Cartridge is mounted and secured with screws to the G3PA Unit. No special tool is required to remove the Cartridge.

Extraction

Follow the procedures below to dismount the G32A-A Power Device

Cartridge from the G3PA.

1. Switch off the power.

2. Remove the terminal cover.

3. Loosen the two centered screws on the sides to dismount the

cartridge. The screws are connected to terminals 1 and 2.

4. Loosen the screws on both the corners.

5. Hold the indented part of both the corners to dismount the

cartridge.

Mounting

1. Apply silicone grease to the entire surface of the heat sink.

2. Make sure that there is no dust or pieces of wire on the heat sink

of the G32A-A or the G3PA.

Remover

Hook here with

Remover.

Apply silicone grease here.

Side A

Side B

Loosen

Apply silicone grease here.

G3PA

3. Insert the cartridge into the opening of the G3PA so that side A

and side B are even.

4. Tighten the screws on both the corners with a tightening torque of

0.59 to 0.78 N·m.

5. Tighten the screws on both the sides with a tightening torque of

0.59 to 0.78 N·m.

6. Attach the terminal cover.

7. Switch on the power and check the G3PA to be sure it works

properly.

■Linking Terminal Connection

•Connecting with linking terminal for G3PA-210B(L)-VD, -220B(L)-

VD, -240B(L)-VD and G3PA-420B-VD(-2), G3PA-430B-VD(-2).

•Connecting with linking terminal for G32A.

Side B

Side A

SSR1 SSR2 SSR1 SSR2

1. When SSRs are close

mounted, loosen the

M3.5 Sems screw and

flip the linking terminal

down.

2. Insert the linking

terminal securely

into the center of

the screw and

tighten the screw.

SSR G32A Unit SSR G32A Unit

* The cover will not fit if

the terminal protrudes.

1. When SSR are close

mounted, loosen the

M3.5 Sems screw on

the G32A and flip the

linking terminal down.

2. Insert the linking terminal

securely into the center

of the screw and tighten

the screw. Ensure that

the linking terminal does

not protrude.

Linking terminal

Connect the terminal with power off.

G3PA-420B-VD

Refer to the instruction manual for

the G32A-A Power Device Cartridge

to replace the G3PA's triac part.

When the temperature indicator has turned from pink to red, the G32-A-A Power Device Cartridge

may have malfunctioned, in which case the cartridge must be replaced with a new one.

Use the terminal cover to prevent accidents

due to electric shock.

Linking

terminal

Linking

terminal

G3PA

Engineering Data

Load Current vs. Ambient Temperature

For close mounting of two or three SSRs, limit the load current to 90% or less.

For close mounting of two or three SSRs, limit the load current to 80% or less.

40 60 80 100200-20-30

Panel Ground

Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)

Load current (A)

Vertical Mounting

G3PA-240B(L)-VD G3PA-260B(L)-VD

G3PA-220B(L)-VD

G3PA-210B(L)-VD

G3PA-210B(L)-VD, G3PA-220B(L)-VD

Ambient temperature (°C) Ambient temperature (°C)

Load current (A)

G3PA-430B-VD, G3PA-430B-VD-2G3PA-420B-VD, G3PA-420B-VD-2 G3PA-450B-VD-2

Ambient temperature (°C)

Load current (A)

G3PA

Input Voltage vs. Input Current

G3PA-2@0B-VD

Input current (mA)

Input voltage (V)

Input current (mA)

Input voltage (V)

G3PA-4@0-VD, G3PA-4@-VD-2

40201086421

0.1

0.2

0.4

0.6

0.8

Input impedance

Input current

Ta = 25°C

40201086421

0.1

0.2

0.4

0.6

0.8

Input impedance

Input

current

T = 25°C

Input impedance (kΩ)

40 60 80 100200−20−30

3.5

5.5 10

Panel

Ground

Horizontal Mounting

Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)

Load current (A)

G3PA-240B(L)-VD G3PA-260B(L)-VD

G3PA-220B(L)-VD

G3PA-210B(L)-VD, G3PA-220B(L)-VD

G3PA-210B(L)-VD

Ambient temperature (°C)

Load current (A)

G3PA-430B-VD

G3PA-420B-VD

G3PA-450B-VD-2

Ambient temperature (°C)

Load current (A)

G3PA-420B-VD, G3PA-430B-VD

G3PA-420B -VD-2, G3PA-430B-VD-2

G3PA

−30 10 30 80

−30 10 30 80 100

40 60 80 100200-20-30

4.5

Ambient temperature (°C)

G3PA-430B-VD, G3PA-430B-VD-2

Load current (A)

Ambient temperature (°C)

Load current (A)

G3PA-420B-VD, G3PA-420B-VD-2

DIN track

Panel Ground

Close Mounting (Up to Three)

Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C)

Load current (A)

G3PA-240B(L)-VD G3PA-260B(L)-VD

G3PA-220B-VD

G3PA-210B-VD

G3PA-210B(L)-VD, G3PA-220B(L)-VD

G3PA-450B-VD-2

Ambient temperature (°C)

Load current (A)

G3PA

One Cycle Surge Current: Non-repetitive

Note: Keep the inrush current to half the rated value if it occurs repetitively.

G3PA-210B(L)-VD G3PA-220B(L)-VD, G3PA-420B-VD,

G3PA-420B-VD-2

G3PA-240B(L)-VD/260B(L)-VD,

G3PA-430B-VD, G3PA-430B-VD-2,

G3PA-450B-VD-2

Inrush current (A. Peak)

Energized time (ms)

Inrush current (A. Peak)

Energized time (ms)

Inrush current (A. Peak)

Energized time (ms)

G3PA

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Two, 4.5 dia. or M4 holes

4.6 dia.

Two, M 4

100 max.

G3PA-210B(L)-VD

Mounting

Holes

Without Terminal

Cover

With Terminal

Cover

Linking terminal B1

Linking

terminal B2

Tw o,

M3.5

4.6 x 5.6 elliptical

hole

Terminal

Arrangement/

Internal Connections

Trigger circuit

Input circuit

Two, 4.5 dia. or M4 holes

4.6 dia.

Two, M 4

100 max.

G3PA-220B(L)-VD

Mounting

Holes

Without Terminal

Cover With Terminal

Cover

Linking terminal B1

Tw o,

M3.5

Linking terminal B2

4.6 x 5.6 elliptical

hole

Terminal

Arrangement/

Internal Connections

Trigger circuit

Input circuit

4.6 dia.

Two, M 5

100 max.

Two, 4.5 dia. or M4 holes

G3PA-240B(L)-VD

Mounting

Holes

Without Terminal

Cover

With Terminal

Cover

Linking

terminal B1

Tw o,

M3.5

Linking

terminal B2

4.6 x 5.6 elliptical

hole

Terminal

Arrangement/

Internal Connections

Trigger circuit

Input circuit

G3PA

Two, 4.5 dia.

or M4 holes

4.6 dia. Two, M 5

100 max.

Two, M3.5

110 max.

Mounting Holes

With Terminal

Cover Without Terminal

Cover

G3PA-260B(L)-VD

G3PA-450B-VD-2

4.6 x 5.6

elliptical hole

Terminal Arrangement/

Internal Connections

Trigger circuit

Input circuit

Trigger circuit

Input circuit

G3PA-260B

-VD

G3PA-450B

-VD-2

−

4.5

7.6

2.2

8.8

13.2

8.6

90±0.2

25±0.2

90±0.3

90 91

67 38 80

Two, M 4

Two, M3.5

4.6 dia.

37 max.

4.5 x 5.6 elliptic hole 100 max.

G3PA-420B-VD, G3PA-420B-VD-2

Mounting Holes Terminal Arrangement/

Internal Connections

Trigger circuit

Input circuit

100

max.

Linking

terminal

−B2

Linking

terminal

+B1

Two, 4.5 dia. or M4

Without Terminal

Cover

With Terminal

Cover

89 91

4.5

7.6

35±0.2 35±0.3

90±0.3

67 38 80

90±0.2

4.6 dia.

100 max.

47 max.

4.6 x 5.6

elliptic hole

G3PA-430B-VD, G3PA-430B-VD-2

Mounting Holes

Two, 4.5 dia. or M4

Two, M5

Terminal Arrangement/

Internal Connections

Trigger circuit

Input circuit

Linking

terminal

+B1

Linking

terminal

−B2

100

max.

Without Terminal

Cover

With Terminal

Cover

G3PA

Safety Precautions

■Precautions for Correct Use

Please observe the following precautions to prevent failure to

operate, malfunction, or undesirable effect on product performance.

Load Connection

For an AC load, use a power supply rated at 50 or 60 Hz.

The maximum operating frequency is 10 Hz.

The G3PA-(VD) has a built-in varistor for overvoltage protection.

At a low applied voltage, such as 24 VAC, the load current is not fully

supplied. When the Unit is switched ON, the voltage required to

power the Unit deprives the output signal of the necessary voltage

level and thus creates loss time. The lower the load voltage is, the

greater the loss time is. This condition, however, will not create any

serious problems.

For a DC or L load, a diode should be connected in parallel the load

to absorb the counter electromotive force of the load.

When attaching a heat sink to the G3PA-(VD), in order to facilitate

heat dissipation, apply silicone grease or equivalent heat-conductive

grease on the heat sink. (Toshiba Silicone, Shinetsu Silicone, etc.)

Tighten the mounting screws of the heat sink with a torque of 0.78 to

0.98 N·m.

Noise Terminal Voltage according to

EN55011

The G3PA-(VD) complies with EN55011 standards when a capacitor

is connected to the load power supply as shown in the following

circuit diagram.

Recommended Capacitor: 1 µF, 250 VAC

Mounting

Loss time

SSR

Input

Load

Load power

supply

G3PA-(VD) Output

Load

Input

DIN track

G3PA

Panel

DIN track

Panel

The rated ambient

temperature is

40°C. (30°C for

400 V.)

Vertical mounting

Close mounting

Horizontal mounting

• Screw or DIN track mounting is possible.

• Vertical mounting should usually be used.

• Close mounting cannot be used if the SSR is used at a 100% load

current. Leave a gap of at least 10 mm on the left and right of each

Unit.

• Close mounting can be used under the following conditions:

1. Close mounting can be performed with no more than three SSRs

(For four or more SSRs, leave a gap of at least 10 mm.)

2. Use a load current of 80% or less (90% or less for the

G3PA-210B-VD, G3PA-220B-VD, or G3PA-240B-VD).

3. Leave a gap of at least 80 mm above and below the SSR.

4. Leave a gap of at least 60 mm from wiring ducts to the top of the

SSR and at least 30 mm from wiring ducts to the bottom of the SSR.

• With vertical mounting, reduce the load current by 30%.

(Refer to the Load Current vs. Ambient Temperature graph.)

80 mm

Note: Leave a distance of 60 mm min. between SSRs and ducts (especially above the SSR).

Vertical

G3PA

Close Mounting

SSR Mounting Pitch

Panel Mounting (At a rated ambient temperature of 40°C).

Relationship between SSRs and Ducts

Ventilation

If the air inlet or air outlet has a filter, clean the filter regularly to

prevent it from clogging and ensure an efficient flow of air.

Do not locate any objects around the air inlet or air outlet, otherwise

the objects may obstruct the proper ventilation of the control panel.

A heat exchanger, if used, should be located in front of the SSR Units

to ensure the efficiency of the heat exchanger.

Please reduce the ambient temperature of SSRs.

The rated load current of an SSR is measured at an ambient

temperature of 25 or 40 °C.

An SSR uses a semiconductor in the output element. This causes

the temperature inside the control panel to increase due to heating

resulting from the passage of electrical current through the load. To

restrict heating, attach a fan to the ventilation outlet or air inlet of the

control panel to ventilate the panel. This will reduce the ambient

temperature of the SSRs and thus increase reliability. (Generally,

each 10°C reduction in temperature will double the expected life.)

Example: For 10 SSRs with load currents of 20 A,

0.31 x 10 = 3.1

Thus, 4 fans would be required.

Size of fans: 92 mm2, Air volume: 0.7 m3/min,

Ambient temperature of control panel: 30°C

If there are other instruments that generate heat in the control

panel other than SSRs, additional ventilation will be required.

SSR

Between duct

or airflow

obstruction

and SSR

60 mm min.

Mounting direction

Vertical direction

Space between

SSRs

30 mm min.

80 mm min.

min.

Close Mounting

Duct or airflow obstruction

G3PA

Mounting surface

Duct or

airflow

obstruction

Duct or

airflow

obstruction

Vertical

direction

Airflow

(A height of no

more than half

the SSR's height is

recommended.)

Duct Height

If the ducts cannot be

shortened, place the SSR

on a metal base so that it

is not surrounded by the

ducts.

Use short ducts.

Do not surround the SSR

with ducts, otherwise the

heat radiation of the SSR

will be adversely affected.

Countermeasure (1) Countermeasure (2)

50 mm max.

G3PA G3PA

G3PA

Air inlet

Be aware of air flow

Duct or

air flow

obstruction

Ventilation

outlet

Load current (A) 10 A 20 A 30 A 40 A 60 A

Required number of fans

per SSR

0.16 0.31 0.47 0.62 0.93

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:



Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.



Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.



Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2012.8

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Omron:

G3PA-420B-VD-2DC12-24 G3PA-210B-VD-DC5-24 G3PA-220B-VD DC5-24 G3PA-240B-VD DC5-24 G3PA-260B-

VD DC5-24 G3PA-430B-VD-2 DC12-24 G3PA-450B-VD-2 DC12-24 G32A-A20-VD DC5-24 G32A-A40-VD DC5-24

G32A-A60-VD DC5-24 G32A-A420-VD DC12-24 G32A-A430-VD DC12-24 G32A-A420-VD-2 DC12-24 G32A-A430-

VD-2 DC12-24 G32A-A450-VD-2 DC12-24 G32A-D20 G32A-D40 G32A-N2075 G3PA-210B-VD AC24 G3PA-420B-

VD DC12-24 G3PA-430B-VD DC12-24 G32A-A10-VD DC5-24 G32A-N4075 G3PA-220B-VD AC24 G3PA-420B-VD-

2-DC12-24 G32A-B AC200/240 G32A-C G32A-B AC100/120 G32A-E-VR G32A-EA AC100-240 G3PA-420B-VD-7

DC12-24