D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Sta nda Mounting height rd V ers ion 9--37 SMC stamped solder pins, angled with grounding board locks No. of contacts Identification Performance levels Explanations see page 05.170 Other performance levels on request Part No. Performance level Performance level 3 2 Male connector D-Sub metal shell with dimples 2.84 mm pitch 9 15 25 37 09 65 167 781 09 65 267 781 09 65 367 781 09 65 467 781 2.84 mm pitch . . . . 1) 1) 1) 1) 2.54 mm pitch 9 15 25 37 09 65 166 781 09 65 266 781 09 65 366 781 09 65 466 781 09 65 167 681 09 65 267 681 09 65 367 681 09 65 467 681 . . . . 1) 1) 1) 1) 2.54 mm pitch . . . . 09 65 166 681 09 65 266 681 09 65 366 681 09 65 466 681 . . . . Female connector metal shell 2.84 mm pitch 9 15 25 37 09 66 157 761 09 66 257 761 09 66 357 761 09 66 457 761 2.84 mm pitch . . . . 2.54 mm pitch 9 15 25 37 Please insert digit for flange thread or fitted female screw locks O 3.1 mm hole 1)01) M3 1 4-40 UNC 2 fitted screw locks 4-40 UNC 3 05 174 1) Not normally kept in stock 09 66 156 761 09 66 256 761 09 66 356 761 09 66 456 761 1) 1) 1) 1) 09 66 157 661 09 66 257 661 09 66 357 661 09 66 457 661 . . . . 2.54 mm pitch . . . . 09 66 156 661 09 66 256 661 09 66 356 661 09 66 456 661 . . . . 1) 1) 1) 1) s D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Sta nda Mounting height rd V ers ion 9--37 s SMC stamped solder pins, angled with grounding board locks Identification Drawing Dimensions in mm Male connector Mating face acc. to: DIN 41 652 * CECC 75 301-802 IEC 60 807 X No. 1 contact fitted screw locks 4 - 40 UNC D-Sub Nut thread M3 or 4 - 40 UNC Female connector X Mating face acc. to: DIN 41 652 * CECC 75 301-802 IEC 60 807 No. 1 contact Nut thread Grounding board lock 0.2 x 0.6 Board drillings a b0.1 c f 9 30.90 25.00 12.50 2.74 15 39.20 33.30 12.50 2.74 25 53.10 47.00 12.50 2.76 37 69.40 63.50 12.50 2.76 05 175 Mating conditions see page 05.170 Mounting details see page 05.171