CH411C165JA30A5 - AVX Corporation

SMPS Capacitors Chip Assemblies

CH/CV - Radial, Dual-in-Line,

4 Terminal/SMT ‘J’ & ‘L’ Ranges European Preferred Styles

10nF to 180 µF BS9100 approved

50V to 500 VDC Low ESR/ESL

-55ºC to +125ºC 1B/C0G and 2C1/X7R Dielectrics

This range allows SMPS engineers to select the best volumetric

solution for input and output filter applications in high reliability designs.

Utilizing advanced multilayer ceramic techniques to minimize ESR/ESL

giving high current handling properties appropriate for filtering,

smoothing and decoupling circuits.

ELECTRICAL SPECIFICATIONS

Temperature Coefficient CECC 30 000, (4.24.1)

1B/C0G: A Temperature Coefficient - 0 ± 30 ppm/ºC, -55º to +125ºC

2C1/X7R: C Temperature Characteristic - ± 15%, -55º to +125ºC

Capacitance Test 25ºC

1B/C0G: Measured at 1 VRMS max at 1KHz (1MHz for 100 pF or less)

2C1/X7R: Measured at 1 VRMS max at 1KHz

Dissipation Factor 25°C

1B/C0G: 0.15% max at 1KHz, 1 VRMS max (1MHz for 100 pF or less)

2C1/X7R: 2.5% max at 1KHz, 1 VRMS max

Insulation Resistance 25°C

1B/C0G & 2C1/X7R: 100K megohms or 1000 megohms-µF, whichever

is less

Dielectric Withstanding Voltage 25°C (Flash Test)

1B/C0G & 2C1/X7R: 250% rated voltage for 5 seconds with 50 mA max

charging current. (500 Volt units @ 150% rated voltage)

Dielectric Withstanding Voltage 25°C (Flash Test)

1B/C0G & 2C1/X7R: 250% rated voltage for 5 seconds with 50 mA

max charging current. (500 Volt units @ 150% rated voltage)

Life Test (1000 hrs) CECC 30 000 (4.23)

1B/C0G & 2C1/X7R: 200% rated voltage at +125ºC.

(500 Volt units @ 120% rated voltage)

Damp Heat IEC 68-2-3, 56 days.

Thermal Shock IEC 68-2-14

-55ºC to +125ºC, 5 cycles

Resistance to Solder Heat IEC 68-2-20

Vibration IEC 68-2-6

10Hz - 2000Hz, 0.75mm or 98m/sec2, 6 hrs.

Bump IEC 68-2-29

390m/sec2, 4000 bumps

CH and CV 4x, 5x, 81-84

Top line A (AVX). Voltage code, dielectric code.

Middle line capacitance code, tolerance code.

Bottom line 6 digit batch code.

Other CH, CV Styles

Top line AVX.

Second line voltage code, dielectric code.

Third line capacitance code, tolerance code.

Bottom line, 6 digit batch code.

AVX

156M

xxxxxx

A5C

225K

xxxxxx

MARKING

HOW TO ORDER

CV 52 5 C 106 M A 3 0 A 2

Style Size Voltage Dielectric Capacitance Capacitance Specification Finish Lead Dia. Lead Space Lead Style

Code Code Code Code Code Tolerance Code Code Code Code Code

(see product section) 5 = 50V A = C0G (2 significant J = ±5% A = Non-customized 3 = Uncoated 0 = Standard A = Standard 2 = 2 Terminal

1 = 100V C = X7R digits + no. K = ±10% 8 = Coated 4 = 4 Terminal

2 = 200V of zeros) M = ±20% (classified as See Note 1

7 = 500V eg. 105 = 1 µF P = -0 +100% uninsulated) above

106 = 10 µF

107 = 100 µF

LHS

Lead

Style Dia

(max) (max) (nom) (nom)

CV41-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028)

CV51-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035)

CV61-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035)

CV71-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035)

CV76-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035)

Part Number format (CVxxxxxxxxxxxA2)

Typical Part Number CV525C106MA30A2

VERTICALLY MOUNTED RADIAL PRODUCT

SMPS Capacitors (CV Style)

Chip Assemblies European Preferred Styles

Part Number format (CVxxxxxxxxx3xx4)

Typical Part Number CV435C106MA30A4

VERTICALLY MOUNTED 4 TERMINAL RADIAL PRODUCT

*Tolerance ± 0.8

millimeters (inches)

T Max.

H Max. L Max.

25 (0.984)

±3 (0.118) Lead Dia.

See Table

S1 ±0.5

(0.020)

S1 ±0.5

(0.020)

M1 = M2 ±0.5 (0.020)

DIMENSIONS millimeters (inches)

Style T max

CV41/51/61/71/76 3.80 (0.150)

CV42/52/62/72/77 7.40 (0.291)

CV43/53/63/73/78 11.1 (0.437)

CV44/54/64/74/79 14.8 (0.583)

LHS

Lead

Style Dia

(max) (max) (nom) (nom)

CV43-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028)

CV53-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035)

CV63-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035)

CV73-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035)

CV78-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035)

*Tolerance ± 0.8 (0.031)

millimeters (inches)

Note 1. This style is only available in 3 & 4 chip assemblies

DIMENSIONS millimeters (inches)

Style T max S1

CV43/53/63/73/78 11.1 (0.437) 5.08 (0.200)

CV44/54/64/74/79 14.8 (0.583) 7.62 (0.300)

T Max.

H Max.

25 (0.984)

±3 (0.118)

Lead Dia.

See Table

S ±0.5

(0.020)

L Max.

Note: See page 101 for How to Order BS9100 parts

LW S

No. of

Style Leads

(max) (max) (nom) per side

CH41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3

CH51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4

CH61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5

CH71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7

CH76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6

CH81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14

CH86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14

CH91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14

LWS

S Lead S1

Style Dia

(max) (max) (nom) (nom) (nom)

CH42-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028) 5.08 (0.200)

CH52-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035) 7.62 (0.300)

CH62-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035) 7.62 (0.300)

CH72-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035) 15.2 (0.600)

CH77-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035) 10.2 (0.400)

CH82-84 14.1 (0.555) 38.2 (1.503) 10.2 (0.400) 0.9 (0.035) 27.9 (1.100)

CH87-89 17.8 (0.700) 38.2 (1.503) 15.2 (0.600) 1.0 (0.039) 27.9 (1.100)

CH92-94 22.7 (0.893) 40.6 (1.598) 21.2* (0.834) 1.2 (0.047) 30.5 (1.200)

Part Number format (CHxxxxxxxxx3xx4)

Typical Part Number CH782C106MA30A4

HORIZONTALLY MOUNTED 4 TERMINAL RADIAL PRODUCT

SMPS Capacitors (CH Style)

Chip Assemblies European Preferred Styles

Part Number format (CHxxxxxxxxxx0A0)

Typical Part Number CH615C106MA30A0

HORIZONTALLY MOUNTED DUAL-IN-LINE PRODUCT

Lead width 0.5 (0.020)

Lead thickness 0.254 (0.100)

L1 = L2 ± 0.5 (0.020)

HOW TO ORDER

CH 52 5 C 106 M A 3 0 A 0

Style Size Voltage Dielectric Capacitance Capacitance Specification Finish Lead Dia. Lead Space Lead Style

Code Code Code Code Code Tolerance Code Code Code Code Code

(see product section) 5 = 50V A = C0G (2 significant J = ±5% 0 = Standard A = Standard 0 = Straight dual

1 = 100V C = X7R digits + no. K = ±10% in line

2 = 200V of zeros) M = ±20% 4 = 4 Terminal

7 = 500V eg. 105 = 1 µF P = -0 +100%

106 = 10 µF

107 = 100 µF

*Tolerance ± 0.8

NOTE: This style is only available in 2, 3 & 4 chip assemblies only millimeters (inches)

S ± 0.5

W max

T max

25 (0.984)

±3 (0.118)

Lead dia

(see table)

L max

M1 = M2 ± 0.5 (0.020)

S1 ± 0.5

(0.020) (0.020)

DIMENSIONS millimeters (inches)

*Tolerance ± 0.8 (0.031)

DIMENSIONS millimeters (inches)

Style T max

CH42/52/62/72/77/87/92 7.4 (0.291)

CH43/53/63/73/78/88/93 11.1 (0.437)

CH44/54/64/74/79/89/94 14.8 (0.583)

Style T max

CH41/51/61/71/76/81/86/91 3.8 (0.150)

CH42/52/62/72/77/82/87/92 7.4 (0.291)

CH43/53/63/73/78/83/88/93 11.1 (0.437)

CH44/54/64/74/79/84/89/94 14.8 (0.583)

W max

max

2.0 (0.079)

max

2.54 (0.100)

± 0.05 (0.002)

L max

S ± 0.5

(0.020)

(0.512)

1 (0.039)

millimeters (inches)

A = Non-customized 3 = Uncoated

8 = Coated

(classified as

uninsulated)

Note: See page 101 for How to Order BS9100 parts

A = Non-customized 3 = Uncoated

8 = Coated

(classified as

uninsulated)

HOW TO ORDER

CH 52 5 C 106 M A 3 0 A 7

Style Size Voltage Dielectric Capacitance Capacitance Specification Finish Lead Dia. Lead Space Lead Style

Code Code Code Code Code Tolerance Code Code Code Code Code

(see product section) 5 = 50V A = C0G (2 significant J = ±5% 0 = Standard A = Standard 3 = Low profile ‘J’

1 = 100V C = X7R digits + no. K = ±10% (single chip)

2 = 200V of zeros) M = ±20% 5 = Low profile ‘L’

7 = 500V eg. 105 = 1 µF P = -0 +100% (single chip)

106 = 10 µF 7 = ‘L’ Dual in line

107 = 100 µF 8 = ‘J’ Dual in line

SMPS Capacitors (CH Style)

Chip Assemblies European Preferred Styles

Part Number format (CHxxxxxxxxxx0A7)

Typical Part Number CH411C275KA30A7

HORIZONTALLY MOUNTED ‘L’ LEAD SMT PRODUCT

Part Number format (CHxxxxxxxxxx0A8)

Typical Part Number CH411C275KA30A8

HORIZONTALLY MOUNTED ‘J’ LEAD SMT PRODUCT

*Tolerance ± 0.8 (0.031)

millimeters (inches)

max

W max

T max

S ± 0.5 (0.02)

NOTE: A ‘L’ lead low proﬁle version

(CH....0A5) is available with lead height

1.1 (0.043) max. for single chip assemblies eg.

CH415C225MA30A5

2.54 (0.1)

±0.5 (0.02)

2.54 (0.1)

±0.5 (0.02)

Lead width 0.5 (0.020)

Lead thickness 0.254 (0.010)

L1 = L2 ± 0.5 (0.020)

Style T max

CH41/51/61/71/76/81/86/91 3.8 (0.150)

CH42/52/62/72/77/82/87/92 7.4 (0.291)

CH43/53/63/73/78/83/88/93 11.1 (0.437)

CH44/54/64/74/79/84/89/94 14.8 (0.583)

Lead width 0.5 (0.020)

Lead thickness 0.254 (0.010)

L1 = L2 ± 0.5 (0.020)

Style T max

CH41/51/61/71/76/81/86/91 3.8 (0.150)

CH42/52/62/72/77/82/87/92 7.4 (0.291)

CH43/53/63/73/78/83/88/93 11.1 (0.437)

CH44/54/64/74/79/84/89/94 14.8 (0.583)

LW S

No. of

Style Leads

(max) (max) (nom) per side

CH41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3

CH51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4

CH61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5

CH71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7

CH76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6

CH81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14

CH86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14

CH91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14

DIMENSIONS millimeters (inches)

T max

max

W max

NOTE: A ‘J’ lead low proﬁle version (CH....0A3) is available with lead height

1.1 (0.043) max. for single chip assemblies eg. CH515C475MA30A3

S ± 0.5 (0.020)

2.54 (0.100)

±0.5 (0.020)

2.54 (0.100)

±0.5 (0.020)

LW S

No. of

Style Leads

(max) (max) (nom) per side

CH41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3

CH51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4

CH61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5

CH71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7

CH76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6

CH81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14

CH86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14

CH91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14

*Tolerance ± 0.8 (0.031)

DIMENSIONS millimeters (inches)

Note: See page 101 for How to Order BS9100 parts

CH/CV41-44 CH/CV51-54 CH/CV61-64 CH/CV71-74 CH/CV76-79 CH81-84 CH86-89 CH91-94

Styles Styles Styles Styles Styles Styles Styles Styles

Voltage DC

Cap µF 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500

0.01 41

0.012 41

0.015 41

0.018 41

0.022 42 51

0.027 42 51

0.033 41 42 52 61

0.039 41 42 52 61

0.047 41 41 43 52 61

0.056 41 41 43 52 61

0.068 41 41 41 44 51 53 62 71 76 81

0.082 41 41 42 51 53 62 71 76 81

0.1 41 42 42 51 51 54 62 71 76 81

0.12 42 42 42 51 51 52 61 62 72 77 81 86

0.15 42 42 42 51 52 52 61 61 63 72 77 81 86

0.18 42 42 43 51 52 52 61 61 63 72 77 82 86

0.22 42 43 43 52 52 52 61 61 62 64 71 72 76 77 81 82 86 91

0.27 43 43 44 52 52 53 61 62 62 71 71 73 76 76 78 81 81 82 87 91

0.33 43 44 52 53 53 61 62 62 71 71 73 76 76 78 81 81 82 87 91

0.39 44 52 53 54 62 62 62 71 71 72 74 76 76 77 79 81 81 81 83 86 87 92

0.47 53 54 62 62 63 71 71 72 76 76 77 81 81 81 83 86 87 92

0.56 53 62 63 63 71 72 72 76 77 77 81 81 82 84 86 86 88 92

0.68 54 62 63 64 72 72 72 77 77 77 81 82 82 86 86 86 88 92

0.82 63 64 72 72 73 77 77 78 82 82 82 86 86 87 89 91 93

1 6364 727273 777778 828282 8687 87 91 9193

1.2 64 72 73 74 77 78 79 82 82 83 87 87 87 91 91 92 94

1.5 73 73 78 78 82 83 83 87 87 87 91 92 92

1.8 73 74 78 79 83 83 84 87 87 88 92 92 92

2.2 74 79 83 84 87 88 88 92 92 92

2.7 84 88 88 89 92 92 93

3.3 88 89 92 93 93

3.9 89 93 93 94

4.7 93 94

5.6 94

C0G DIELECTRIC ULTRA STABLE CERAMIC

NB Figures in cells refer to size within ordering information

SMPS Capacitors (CH/CV Style)

Chip Assemblies European Preferred Styles

CH/CV41-44 CH/CV51-54 CH/CV61-64 CH/CV71-74 CH/CV76-79 CH81-84 CH86-89 CH91-94

Styles Styles Styles Styles Styles Styles Styles Styles

Voltage DC

Cap µF 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500

0.12 41

0.15 41

0.18 41

0.22 41

0.27 42 51

0.33 41 42 51

0.39 41 42 51

0.47 41 42 52 61

0.56 41 43 52 61

0.68 42 43 51 52 61

0.82 42 44 51 52 61 71 76 81

1414244 5153 6162 71 76 81

1.2 41 42 52 53 61 62 71 76 81

1.5 41 43 52 54 61 62 71 76 81 86

1.8 41 41 43 52 61 62 72 77 82 86

2.2 41 41 44 51 52 61 63 71 72 76 77 81 82 86

2.7 41 41 51 53 62 63 71 72 76 77 81 82 87 91

3.3 41 42 51 53 62 64 71 72 76 77 81 82 87 91

3.9 42 42 51 51 54 62 72 73 77 78 81 83 86 87 91

4.7 42 42 51 52 61 62 72 73 77 78 82 83 86 87 91

5.6 42 42 51 52 61 63 72 74 77 79 82 84 86 88 92

6.8 42 43 52 52 61 61 63 72 77 82 86 88 92

8.2 43 43 52 52 61 61 64 71 73 76 78 82 87 89 91 92

10 43 44 52 53 61 62 64 71 73 76 78 83 87 91 92

12 44 53 53 62 62 71 71 74 76 76 79 81 83 87 92 93

15 53 54 62 62 71 71 76 76 81 81 84 86 87 92 93

18 54 62 63 71 72 76 77 81 81 86 88 92 94

22 54 62 63 72 72 77 77 81 82 86 86 88 92

27 63 64 72 72 77 77 82 82 86 86 89 93

33 63 64 72 73 77 78 82 82 86 87 91 93

39 64 72 73 77 78 82 82 87 87 91 91 94

47 73 74 78 79 82 83 87 87 91 92

56 73 78 83 83 87 87 92 92

68 74 79 83 84 87 88 92 92

82 84 88 88 92 92

100 88 89 92 93

120 89 93 93

150 93 94

180 94

X7R DIELECTRIC STABLE CERAMIC

NB Figures in cells refer to size within ordering information

SMPS Capacitors (CH/CV Style)

Chip Assemblies European Preferred Styles