29
SMPS Capacitors Chip Assemblies
CH/CV - Radial, Dual-in-Line,
4 Terminal/SMT ‘J’ & ‘L’ Ranges European Preferred Styles
10nF to 180 µF BS9100 approved
50V to 500 VDC Low ESR/ESL
-55ºC to +125ºC 1B/C0G and 2C1/X7R Dielectrics
This range allows SMPS engineers to select the best volumetric
solution for input and output filter applications in high reliability designs.
Utilizing advanced multilayer ceramic techniques to minimize ESR/ESL
giving high current handling properties appropriate for filtering,
smoothing and decoupling circuits.
ELECTRICAL SPECIFICATIONS
Temperature Coefficient CECC 30 000, (4.24.1)
1B/C0G: A Temperature Coefficient - 0 ± 30 ppm/ºC, -55º to +125ºC
2C1/X7R: C Temperature Characteristic - ± 15%, -55º to +125ºC
Capacitance Test 25ºC
1B/C0G: Measured at 1 VRMS max at 1KHz (1MHz for 100 pF or less)
2C1/X7R: Measured at 1 VRMS max at 1KHz
Dissipation Factor 25°C
1B/C0G: 0.15% max at 1KHz, 1 VRMS max (1MHz for 100 pF or less)
2C1/X7R: 2.5% max at 1KHz, 1 VRMS max
Insulation Resistance 25°C
1B/C0G & 2C1/X7R: 100K megohms or 1000 megohms-µF, whichever
is less
Dielectric Withstanding Voltage 25°C (Flash Test)
1B/C0G & 2C1/X7R: 250% rated voltage for 5 seconds with 50 mA max
charging current. (500 Volt units @ 150% rated voltage)
Dielectric Withstanding Voltage 25°C (Flash Test)
1B/C0G & 2C1/X7R: 250% rated voltage for 5 seconds with 50 mA
max charging current. (500 Volt units @ 150% rated voltage)
Life Test (1000 hrs) CECC 30 000 (4.23)
1B/C0G & 2C1/X7R: 200% rated voltage at +125ºC.
(500 Volt units @ 120% rated voltage)
Damp Heat IEC 68-2-3, 56 days.
Thermal Shock IEC 68-2-14
-55ºC to +125ºC, 5 cycles
Resistance to Solder Heat IEC 68-2-20
Vibration IEC 68-2-6
10Hz - 2000Hz, 0.75mm or 98m/sec2, 6 hrs.
Bump IEC 68-2-29
390m/sec2, 4000 bumps
CH and CV 4x, 5x, 81-84
Top line A (AVX). Voltage code, dielectric code.
Middle line capacitance code, tolerance code.
Bottom line 6 digit batch code.
Other CH, CV Styles
Top line AVX.
Second line voltage code, dielectric code.
Third line capacitance code, tolerance code.
Bottom line, 6 digit batch code.
AVX
5C
156M
xxxxxx
A5C
225K
xxxxxx
MARKING
30
HOW TO ORDER
CV 52 5 C 106 M A 3 0 A 2
Style Size Voltage Dielectric Capacitance Capacitance Specification Finish Lead Dia. Lead Space Lead Style
Code Code Code Code Code Tolerance Code Code Code Code Code
(see product section) 5 = 50V A = C0G (2 significant J = ±5% A = Non-customized 3 = Uncoated 0 = Standard A = Standard 2 = 2 Terminal
1 = 100V C = X7R digits + no. K = ±10% 8 = Coated 4 = 4 Terminal
2 = 200V of zeros) M = ±20% (classified as See Note 1
7 = 500V eg. 105 = 1 µF P = -0 +100% uninsulated) above
106 = 10 µF
107 = 100 µF
LHS
Lead
Style Dia
(max) (max) (nom) (nom)
CV41-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028)
CV51-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035)
CV61-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035)
CV71-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035)
CV76-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035)
Part Number format (CVxxxxxxxxxxxA2)
Typical Part Number CV525C106MA30A2
VERTICALLY MOUNTED RADIAL PRODUCT
SMPS Capacitors (CV Style)
Chip Assemblies European Preferred Styles
Part Number format (CVxxxxxxxxx3xx4)
Typical Part Number CV435C106MA30A4
VERTICALLY MOUNTED 4 TERMINAL RADIAL PRODUCT
*Tolerance ± 0.8
millimeters (inches)
T Max.
H Max. L Max.
25 (0.984)
±3 (0.118) Lead Dia.
See Table
S1 ±0.5
(0.020)
S1 ±0.5
(0.020)
M2
M1 = M2 ±0.5 (0.020)
M1
DIMENSIONS millimeters (inches)
Style T max
CV41/51/61/71/76 3.80 (0.150)
CV42/52/62/72/77 7.40 (0.291)
CV43/53/63/73/78 11.1 (0.437)
CV44/54/64/74/79 14.8 (0.583)
LHS
Lead
Style Dia
(max) (max) (nom) (nom)
CV43-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028)
CV53-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035)
CV63-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035)
CV73-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035)
CV78-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035)
*Tolerance ± 0.8 (0.031)
millimeters (inches)
Note 1. This style is only available in 3 & 4 chip assemblies
DIMENSIONS millimeters (inches)
Style T max S1
CV43/53/63/73/78 11.1 (0.437) 5.08 (0.200)
CV44/54/64/74/79 14.8 (0.583) 7.62 (0.300)
T Max.
H Max.
25 (0.984)
±3 (0.118)
Lead Dia.
See Table
S ±0.5
(0.020)
L Max.
Note: See page 101 for How to Order BS9100 parts
31
LW S
No. of
Style Leads
(max) (max) (nom) per side
CH41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3
CH51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4
CH61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5
CH71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7
CH76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6
CH81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14
CH86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14
CH91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14
LWS
S Lead S1
Style Dia
(max) (max) (nom) (nom) (nom)
CH42-44 10.6 (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028) 5.08 (0.200)
CH52-54 11.9 (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035) 7.62 (0.300)
CH62-64 16.5 (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035) 7.62 (0.300)
CH72-74 17.8 (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035) 15.2 (0.600)
CH77-79 22.7 (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035) 10.2 (0.400)
CH82-84 14.1 (0.555) 38.2 (1.503) 10.2 (0.400) 0.9 (0.035) 27.9 (1.100)
CH87-89 17.8 (0.700) 38.2 (1.503) 15.2 (0.600) 1.0 (0.039) 27.9 (1.100)
CH92-94 22.7 (0.893) 40.6 (1.598) 21.2* (0.834) 1.2 (0.047) 30.5 (1.200)
Part Number format (CHxxxxxxxxx3xx4)
Typical Part Number CH782C106MA30A4
HORIZONTALLY MOUNTED 4 TERMINAL RADIAL PRODUCT
SMPS Capacitors (CH Style)
Chip Assemblies European Preferred Styles
Part Number format (CHxxxxxxxxxx0A0)
Typical Part Number CH615C106MA30A0
HORIZONTALLY MOUNTED DUAL-IN-LINE PRODUCT
Lead width 0.5 (0.020)
Lead thickness 0.254 (0.100)
L1 = L2 ± 0.5 (0.020)
HOW TO ORDER
CH 52 5 C 106 M A 3 0 A 0
Style Size Voltage Dielectric Capacitance Capacitance Specification Finish Lead Dia. Lead Space Lead Style
Code Code Code Code Code Tolerance Code Code Code Code Code
(see product section) 5 = 50V A = C0G (2 significant J = ±5% 0 = Standard A = Standard 0 = Straight dual
1 = 100V C = X7R digits + no. K = ±10% in line
2 = 200V of zeros) M = ±20% 4 = 4 Terminal
7 = 500V eg. 105 = 1 µF P = -0 +100%
106 = 10 µF
107 = 100 µF
*Tolerance ± 0.8
NOTE: This style is only available in 2, 3 & 4 chip assemblies only millimeters (inches)
S ± 0.5
W max
T max
M2
25 (0.984)
±3 (0.118)
Lead dia
(see table)
M1
L max
M1 = M2 ± 0.5 (0.020)
S1 ± 0.5
(0.020) (0.020)
DIMENSIONS millimeters (inches)
*Tolerance ± 0.8 (0.031)
DIMENSIONS millimeters (inches)
Style T max
CH42/52/62/72/77/87/92 7.4 (0.291)
CH43/53/63/73/78/88/93 11.1 (0.437)
CH44/54/64/74/79/89/94 14.8 (0.583)
Style T max
CH41/51/61/71/76/81/86/91 3.8 (0.150)
CH42/52/62/72/77/82/87/92 7.4 (0.291)
CH43/53/63/73/78/83/88/93 11.1 (0.437)
CH44/54/64/74/79/84/89/94 14.8 (0.583)
W max
T
max
2.0 (0.079)
max
2.54 (0.100)
± 0.05 (0.002)
L1
L2
L max
S ± 0.5
(0.020)
13
±
(0.512)
1 (0.039)
millimeters (inches)
A = Non-customized 3 = Uncoated
8 = Coated
(classified as
uninsulated)
Note: See page 101 for How to Order BS9100 parts
32
A = Non-customized 3 = Uncoated
8 = Coated
(classified as
uninsulated)
HOW TO ORDER
CH 52 5 C 106 M A 3 0 A 7
Style Size Voltage Dielectric Capacitance Capacitance Specification Finish Lead Dia. Lead Space Lead Style
Code Code Code Code Code Tolerance Code Code Code Code Code
(see product section) 5 = 50V A = C0G (2 significant J = ±5% 0 = Standard A = Standard 3 = Low profile ‘J’
1 = 100V C = X7R digits + no. K = ±10% (single chip)
2 = 200V of zeros) M = ±20% 5 = Low profile ‘L
7 = 500V eg. 105 = 1 µF P = -0 +100% (single chip)
106 = 10 µF 7 = ‘L’ Dual in line
107 = 100 µF 8 = ‘J’ Dual in line
SMPS Capacitors (CH Style)
Chip Assemblies European Preferred Styles
Part Number format (CHxxxxxxxxxx0A7)
Typical Part Number CH411C275KA30A7
HORIZONTALLY MOUNTED ‘L’ LEAD SMT PRODUCT
Part Number format (CHxxxxxxxxxx0A8)
Typical Part Number CH411C275KA30A8
HORIZONTALLY MOUNTED ‘J’ LEAD SMT PRODUCT
*Tolerance ± 0.8 (0.031)
millimeters (inches)
millimeters (inches)
L
max
W max
T max
S ± 0.5 (0.02)
NOTE: A ‘Llead low profile version
(CH....0A5) is available with lead height
1.1 (0.043) max. for single chip assemblies eg.
CH415C225MA30A5
L1
L2
2.54 (0.1)
±0.5 (0.02)
2.54 (0.1)
±0.5 (0.02)
Lead width 0.5 (0.020)
Lead thickness 0.254 (0.010)
L1 = L2 ± 0.5 (0.020)
Style T max
CH41/51/61/71/76/81/86/91 3.8 (0.150)
CH42/52/62/72/77/82/87/92 7.4 (0.291)
CH43/53/63/73/78/83/88/93 11.1 (0.437)
CH44/54/64/74/79/84/89/94 14.8 (0.583)
Lead width 0.5 (0.020)
Lead thickness 0.254 (0.010)
L1 = L2 ± 0.5 (0.020)
Style T max
CH41/51/61/71/76/81/86/91 3.8 (0.150)
CH42/52/62/72/77/82/87/92 7.4 (0.291)
CH43/53/63/73/78/83/88/93 11.1 (0.437)
CH44/54/64/74/79/84/89/94 14.8 (0.583)
LW S
No. of
Style Leads
(max) (max) (nom) per side
CH41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3
CH51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4
CH61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5
CH71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7
CH76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6
CH81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14
CH86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14
CH91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14
DIMENSIONS millimeters (inches)
T max
L
max
L1
L2
W max
NOTE: A ‘J’ lead low profile version (CH....0A3) is available with lead height
1.1 (0.043) max. for single chip assemblies eg. CH515C475MA30A3
S ± 0.5 (0.020)
2.54 (0.100)
±0.5 (0.020)
2.54 (0.100)
±0.5 (0.020)
LW S
No. of
Style Leads
(max) (max) (nom) per side
CH41-44 9.2 (0.362) 8.7 (0.342) 8.2 (0.322) 3
CH51-54 10.7 (0.421) 10.7 (0.421) 10.2 (0.400) 4
CH61-64 14.9 (0.586) 13.6 (0.535) 14.0 (0.551) 5
CH71-74 16.8 (0.661) 21.6 (0.850) 15.2 (0.600) 7
CH76-79 21.6 (0.850) 16.6 (0.653) 20.3* (0.800) 6
CH81-84 12.0 (0.472) 38.2 (1.503) 10.2 (0.400) 14
CH86-89 18.9 (0.744) 38.2 (1.503) 15.2 (0.600) 14
CH91-94 24.0 (0.944) 40.6 (1.598) 20.3* (0.800) 14
*Tolerance ± 0.8 (0.031)
DIMENSIONS millimeters (inches)
Note: See page 101 for How to Order BS9100 parts
33
CH/CV41-44 CH/CV51-54 CH/CV61-64 CH/CV71-74 CH/CV76-79 CH81-84 CH86-89 CH91-94
Styles Styles Styles Styles Styles Styles Styles Styles
Voltage DC
Cap µF 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500
0.01 41
0.012 41
0.015 41
0.018 41
0.022 42 51
0.027 42 51
0.033 41 42 52 61
0.039 41 42 52 61
0.047 41 41 43 52 61
0.056 41 41 43 52 61
0.068 41 41 41 44 51 53 62 71 76 81
0.082 41 41 42 51 53 62 71 76 81
0.1 41 42 42 51 51 54 62 71 76 81
0.12 42 42 42 51 51 52 61 62 72 77 81 86
0.15 42 42 42 51 52 52 61 61 63 72 77 81 86
0.18 42 42 43 51 52 52 61 61 63 72 77 82 86
0.22 42 43 43 52 52 52 61 61 62 64 71 72 76 77 81 82 86 91
0.27 43 43 44 52 52 53 61 62 62 71 71 73 76 76 78 81 81 82 87 91
0.33 43 44 52 53 53 61 62 62 71 71 73 76 76 78 81 81 82 87 91
0.39 44 52 53 54 62 62 62 71 71 72 74 76 76 77 79 81 81 81 83 86 87 92
0.47 53 54 62 62 63 71 71 72 76 76 77 81 81 81 83 86 87 92
0.56 53 62 63 63 71 72 72 76 77 77 81 81 82 84 86 86 88 92
0.68 54 62 63 64 72 72 72 77 77 77 81 82 82 86 86 86 88 92
0.82 63 64 72 72 73 77 77 78 82 82 82 86 86 87 89 91 93
1 6364 727273 777778 828282 8687 87 91 9193
1.2 64 72 73 74 77 78 79 82 82 83 87 87 87 91 91 92 94
1.5 73 73 78 78 82 83 83 87 87 87 91 92 92
1.8 73 74 78 79 83 83 84 87 87 88 92 92 92
2.2 74 79 83 84 87 88 88 92 92 92
2.7 84 88 88 89 92 92 93
3.3 88 89 92 93 93
3.9 89 93 93 94
4.7 93 94
5.6 94
C0G DIELECTRIC ULTRA STABLE CERAMIC
NB Figures in cells refer to size within ordering information
SMPS Capacitors (CH/CV Style)
Chip Assemblies European Preferred Styles
34
CH/CV41-44 CH/CV51-54 CH/CV61-64 CH/CV71-74 CH/CV76-79 CH81-84 CH86-89 CH91-94
Styles Styles Styles Styles Styles Styles Styles Styles
Voltage DC
Cap µF 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500
0.12 41
0.15 41
0.18 41
0.22 41
0.27 42 51
0.33 41 42 51
0.39 41 42 51
0.47 41 42 52 61
0.56 41 43 52 61
0.68 42 43 51 52 61
0.82 42 44 51 52 61 71 76 81
1414244 5153 6162 71 76 81
1.2 41 42 52 53 61 62 71 76 81
1.5 41 43 52 54 61 62 71 76 81 86
1.8 41 41 43 52 61 62 72 77 82 86
2.2 41 41 44 51 52 61 63 71 72 76 77 81 82 86
2.7 41 41 51 53 62 63 71 72 76 77 81 82 87 91
3.3 41 42 51 53 62 64 71 72 76 77 81 82 87 91
3.9 42 42 51 51 54 62 72 73 77 78 81 83 86 87 91
4.7 42 42 51 52 61 62 72 73 77 78 82 83 86 87 91
5.6 42 42 51 52 61 63 72 74 77 79 82 84 86 88 92
6.8 42 43 52 52 61 61 63 72 77 82 86 88 92
8.2 43 43 52 52 61 61 64 71 73 76 78 82 87 89 91 92
10 43 44 52 53 61 62 64 71 73 76 78 83 87 91 92
12 44 53 53 62 62 71 71 74 76 76 79 81 83 87 92 93
15 53 54 62 62 71 71 76 76 81 81 84 86 87 92 93
18 54 62 63 71 72 76 77 81 81 86 88 92 94
22 54 62 63 72 72 77 77 81 82 86 86 88 92
27 63 64 72 72 77 77 82 82 86 86 89 93
33 63 64 72 73 77 78 82 82 86 87 91 93
39 64 72 73 77 78 82 82 87 87 91 91 94
47 73 74 78 79 82 83 87 87 91 92
56 73 78 83 83 87 87 92 92
68 74 79 83 84 87 88 92 92
82 84 88 88 92 92
100 88 89 92 93
120 89 93 93
150 93 94
180 94
X7R DIELECTRIC STABLE CERAMIC
NB Figures in cells refer to size within ordering information
SMPS Capacitors (CH/CV Style)
Chip Assemblies European Preferred Styles