FD Series Crystal Clock Oscillator (XO) Legacy S1633 Series 5.0 x 3.2mm FD 3.3V CMOS Low Jitter XO Package: Recommended Land Pattern: 5.0 x3.2mm Ceramic SMD Product Features * 1 to 133MHz Frequency Range * <1 ps RMS jitter with fundamental or overtone design Pin Functions: Pin Function * Low power standby mode 1 OE Function * Pb-free and RoHS/Green compliant 2 Ground 3 Clock Output 4 V DD Product Description The FD Series 3.3V crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 5.0 x 3.2mm surface-mount ceramic package. Part Ordering Information: FD XXX YYYY Applications The FD Series is ideal for compact, highdensity applications requiring low jitter or tight stability, including: A: ProductFamily B: XXX = FrequencyCode C: YYYY = SpecificationCode Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. * Ethernet * EPON Legacy Ordering Information - For Reference Only: * Fibre Channel * Serial Attached SCSI (SAS) SaRonix * Server & Storage platforms Product Series * SONET/SDH linecards * DSLAM * 802.11a/b/g WiFi * US: 1-408-435-0800 TW: 886-3-4518888 Packaging (T) = Tape & Reel full reel increments Blank = Bulk packaged Output Frequency (MHz) Frequency Stability A = 25 ppm (-20 to +70 C) B = 50 ppm (-2 to +70 C) E = 50 ppm (-40 to +85C) * T1/E1, T3/E3 linecards SaRonix-eCeraTM is a Pericom(R) Semiconductor company S 1633 B - 125.000 (T) * www.saronix-ecera.com All specifications are subject to change without notice. FD 3.3V REV2008_DEC04_01.2 1 3.3V CMOS Low Jitter XO FD FD Series Crystal Clock Oscillator (XO) Legacy S1633 Series | 5.0 x 3.2mm Electrical Performance Parameter Min. Output Frequency Typ. Max. Units 133 MHz 3.30 3.63 V 1 Supply Voltage 2.97 Notes As specified 15 Supply Current, Output Enabled 1 to 50 MHz mA 50 to 80 MHz 10 A Output Hi-Z 20 to 50 ppm 25 45 Supply Current, Standby Mode Frequency Stability Operating Temperature Range -20 +70 -40 +85 Output Logic 0, VOL 80 to 133 MHz C 10% V DD Output Logic 1, VOH Industrial (standard) V 90% V DD V Output Load Duty Cycle See Note 1 below Commercial (standard) 45 15 pF See Note 2 below 55 % Measured 50% V DD ns Measured 20/80% of waveform Rise and Fall Time up to 40 MHz 7 40 to 80 MHz 5 80 to 133 MHz 2.5 Jitter, Phase 1 to 133 MHz 1 Jitter, Accumulated up to 80 MHz 5 80 to 133 MHz 3 Jitter, Total up to 80 MHz 50 80 to 133 MHz 30 ps RMS (1-) 10kHz to 20 MHz frequency band ps RMS (1-) 20.000 adjacent periods ps pk-pk 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units V or open 0.5 V Output is Hi-Z 2.0 Input Voltage (pin 1), Output Disable (low power standby) Internal Pullup Resistance 50 Notes k Output Disable Delay 100 ns Output Enable Delay 10 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 SaRonix-eCeraTM is a Pericom(R) Semiconductor company * Max. Units +125 C US: 1-408-435-0800 TW: 886-3-4518888 Notes * www.saronix-ecera.com All specifications are subject to change without notice. FD 3.3V REV2008_DEC04_01.2 2 3.3V CMOS Low Jitter XO FD FD Series Crystal Clock Oscillator (XO) Legacy S1633 Series | 5.0 x 3.2mm Test Circuit Test Point Power Supply 4 0.1F or 0.01F 3 1 15 pF (Including probe and fixture capacitance) 2 Output Enable / Disable Function Reflow Soldering Profile As per IPC/JEDEC J-STD-020C Temperature - C 1 to 3C/sec max 260 Peak 260C for 10 sec max 1 to 3C/sec 217 Time 60 to 90 sec 4 to 6 minutes max Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: 1-408-435-0800 TW: 886-3-4518888 * www.saronix-ecera.com All specifications are subject to change without notice. FD 3.3V REV2008_DEC04_01.2 3