IS6051 LOW INPUT CURRENT INFRA-RED EMITTING DIODE & LIGHT ACTIVATED SCR Dimensions in mm 2.54 APPROVALS l UL recognised, File No. E91231 7.0 6.0 7.62 max. DESCRIPTION The IS6051 is an optically coupled isolator consisting of infrared light emitting diode and a light activated silicon controlled rectifier in a standard 6pin dual in line plastic package. FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l High Surge Anode Current (5.0 A) l High Blocking Voltage (400V*1) l Low Turn on Current (5mA typical) l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS l 10A, T2L compatible, Solid State Relay l 25W Logic Indicator Lamp Driver l 400V Symmetrical transistor coupler SURFACE MOUNT 1.2 0.6 10.2 9.5 1.4 0.9 OPTION G 8.3 max 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 13/11/97 6 2 5 3 4 8.3 max. 5.1 max. 0.5 min. 3.9 3.1 0.48 15 Max 0.25 ABSOLUTE MAXIMUM RATINGS (25C unless otherwise specified) Storage Temperature -55C to + 150C Operating Temperature -55C to + 100C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260C INPUT DIODE Forward Current Forward Current (Peak) (1s pulse, 300pps) Reverse Voltage Power Dissipation 60mA 3A 6V 100mW DETECTOR Peak Forward Voltage IS605 OPTION SM 1 Peak Reverse Gate Voltage RMS On-state Current Peak On-state Current (100s, 1% duty cycle) Surge Current (10ms) Power Dissipation 400V*1 6V 300mA 10A 5A 300mW *1 IMPORTANT : A resistor must be connected between gate and cathode (pins 4 & 6) to prevent false firing (RGK < 56k) ISOCOM INC 720 E., Park Boulevard, Suite 104, Plano, TX 75074 USA Tel: (972) 423-5521 Fax: (972) 422-4549 DB92611-AAS/A2 ELECTRICAL CHARACTERISTICS ( TA= 25C Unless otherwise noted ) Input Output (note 2) PARAMETER MIN TYP MAX UNITS Forward Voltage (VF) Reverse Voltage (VR) 3 V V IF = 10mA IR = 10A 400 V RGK= 10k, ID= 2A 400 V RGK= 10k, ID= 2A 1.3 V ITM = 300mA 2 A RGK= 10k, IF = 0, VDM= 400V 2 A RGK= 10k, IF = 0, Peak Off-state Voltage (VDM ) Peak Reverse Voltage (VRM ) 1.2 On-state Voltage (VTM ) 1.1 Off-state Current (IDM ) Reverse Current (IR ) 1.5 TEST CONDITION VDM= 400V Coupled Input Current to Trigger ( IFT ) (note 2) Turn on Time ( t on ) Coupled dv/dt, Input to Output (dv/dt) Input to Output Isolation Voltage VISO Input-output Isolation Resistance RISO Input-output Capacitance Cf Note 1 Note 2 13/11/97 3 mA VAK=100V, RGK=27k 50 s RGK=27k, IF=30m, VAK=20V, RL=200 2 V/s VRMS VPK pF 500 5300 7500 1011 See note 1 See note 1 VIO = 500V (note 1) V = 0, f =1MHz Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. DB92611-AAS/A2