ISOCOM COMPONENTS LTD
Unit 25B, Park View Road West,
Park View Industrial Estate, Brenda Road
Hartlepool, Cleveland, TS25 1YD
Tel: (01429) 863609 Fax :(01429) 863581
ISOCOM INC
720 E., Park Boulevard, Suite 104,
Plano, TX 75074 USA
Tel: (972) 423-5521
Fax: (972) 422-4549
DB92611-AAS/A2
APPROVALS
lUL recognised, File No. E91231
DESCRIPTION
The IS6051 is an optically coupled isolator
consisting of infrared light emitting diode and a
light activated silicon controlled rectifier in a
standard 6pin dual in line plastic package.
FEATURES
lOptions :-
10mm lead spread - add G after part no.
Surface mount - add SM after part no.
Tape&reel - add SMT&R after part no.
lHigh Isolation Voltage (5.3kVRMS ,7.5kVPK )
lHigh Surge Anode Current (5.0 A)
lHigh Blocking V oltage (400V*1)
lLow Turn on Current (5mA typical)
lAll electrical parameters 100% tested
lCustom electrical selections available
APPLICATIONS
l10A, T2L compatible, Solid State Relay
l25W Logic Indicator Lamp Driver
l400V Symmetrical transistor coupler
LOW INPUT CURRENT INFRA-RED
EMITTING DIODE & LIGHT
ACTIV ATED SCR
ABSOLUTE MAXIMUM RATINGS
(25°C unless otherwise specified)
Storage Temperature -55°C to + 150°C
Operating Temperature -55°C to + 100°C
Lead Soldering Temperature
(1/16 inch (1.6mm) from case for 10 secs) 260°C
INPUT DIODE
Forward Current 60mA
Forward Current (Peak)
(1µs pulse, 300pps) 3A
Reverse Voltage 6V
Power Dissipation 100mW
DETECTOR
Peak Forward Voltage
IS605 400V*1
Peak Reverse Gate V oltage 6V
RMS On-state Current 300mA
Peak On-state Current
(100µs, 1% duty cycle) 10A
Surge Current (10ms) 5A
Power Dissipation 300mW
*1 IMPORTANT : A resistor must be connected
between gate and cathode (pins 4 & 6) to prevent false
firing (RGK < 56kΩ)
1
34
6
25
Dimensions in mm
2.54
7.0
6.0
7.62
max.
0.5
min. 3.9
3.1
5.1
max.
15°
Max
0.25
0.48
8.3 max.
OPTION G
8.3 max
SURFACE MOUNT
OPTION SM
10.16
10.2
9.5
0.26
1.2
0.6 1.4
0.9
13/11/97
IS6051
DB92611-AAS/A2
PARAMETER MIN TYP MAX UNITS TEST CONDITION
Input Forward Voltage (VF) 1.2 1.5 V IF = 10mA
Reverse Voltage (VR)3VI
R = 10µA
Output Peak Off-state Voltage (VDM )
(note 2) 4 00 V RGK= 10kΩ, ID= 2µA
Peak Reverse V oltage (VRM
)400 V RGK= 10kΩ, ID= 2µA
On-state V oltage (VTM ) 1.1 1.3 V ITM = 300mA
Off-state Current (IDM )2µAR
GK= 10kΩ, IF
= 0,
VDM= 400V
Reverse Current (IR )2µAR
GK= 10kΩ, IF
= 0,
VDM= 400V
Coupled Input Current to Trigger ( I FT ) (note 2) 3mA VAK=100V, RGK=27kΩ
Turn on Time ( ton )50µsR
GK=27kΩ, IF=30mΑ,
VAK=20V , RL=200Ω
Coupled dv/dt, Input to Output (dv/dt) 500 V/ µs
Input to Output Isolation Voltage VISO 5300 VRMS See note 1
7500 VPK See note 1
Input-output Isolation Resistance RISO 1011 ΩVIO = 500V (note 1)
Input-output Capacitance Cf 2 pF V = 0, f =1MHz
ELECTRICAL CHARACTERISTICS ( TA= 25°C Unless otherwise noted )
Note 1 Measured with input leads shorted together and output leads shorted together.
Note 2 Special Selections are available on request. Please consult the factory.
13/11/97
