F-219 (Rev 23JAN19) T2M-110-01-L-D-TH-WT-DS T2M-105-01-L-D-TH-WT T2M-105-01-L-D-RA-WT (2.00 mm) .0787" T2M-105-01-L-D-SM-WT T2M SERIES HIGH-RELIABILITY CABLE HEADER Mates with Tiger EyeTM discrete wire cable assemblies Board Mates: S2M Cable Mates: S2SD, S2SDT SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?T2M Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating (T2M/S2SD): 3.8 A per pin (2 pins powered) Voltage Rating: 250 VAC/350 VDC mated with S2SD Operating Temp Range: -55 C to +105 C with Tin; -55 C to +125 C with Gold RoHS Compliant: Yes Up to 30 positions per row MATED HEIGHT S2M SM= (7.06 mm) .278" THT= (6.17 mm) .243" T2M HIGH-SPEED CHANNEL PERFORMANCE Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max T2M RECOGNITIONS 1 8 Choice of surface mount, through-hole or right-angle G b p s NO. OF POSITIONS PLATING OPTION 01 * Weld tabs Optional weld tab D OPTION For complete scope of recognitions see www.samtec.com/quality 05, 07, 10, 15, 20, 25, 30 FILE NO. E111594 = 10 " (0.25 m) Gold on contact, Matte Tin on tail (Per Row) OTHER SOLUTIONS -TH -L -RA = Right-angle -SM (6.00) .236 No. of positions x (2.00) .0787 + (14.38) .566 = Through-hole = Surface Mount (3.98) .157 (0.64) .025 SQ See S2SD in the discrete wire section (3.81) .150 No. of positions x (2.00) .0787 + (5.67) .223 ALSO AVAILABLE (MOQ Required) (1.98) .078 01 (1.77) (2.26) .070 .089 -RA-WT * Other platings Note: Some lengths, styles and options are non-standard, non-returnable. -TR (2.00) .0787 (1.52) .060 (6.55) .258 (8.76) .345 (2.41) .095 (2.00) .0787 (0.50) .020 SQ (0.64) .025 -TH-WT (8.63) .340 -SM-WT (1.64) .065 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM -DS = Screw Down (N/A with -RA) (mates with -S2M-DS, S2SD/S2SDT -SS/-DS option) = (7.50 mm) .295" DIA Polyimide film Pick & Place Pad (-SM only) (7.44) .293 (2.00) .0787 -WT = Weld Tab (S2SD & S2SDT, -SR/-DR required mate) -K -DS (2.29) .090 02 OTHER OPTION All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. = Tape & Reel (-SM only)