10 5 8 7 | 6 | 5 4 3 2 1 tb_frame_A3_P_AM_T 5 8 7 Rev. E 2006/04/15 Pass $i 8G FD 0.95 AAA [o]0.20/] NOTES: ss 4, MATERIAL: HOUSING: THERMOPLASTIC, GLASS-FILLED UL-94V-0, BLACK 15.875 0.12 MAX(+) TERMINAL: COPPER ALLOY 4.00 SMT NAIL: COPPER ALLOY { | [127 ](25x) A ee { i 2. PLATING: 4.00 | n | CONTACT: 0.38Hm MIN. SELECTIVE GOLD | aSa SAI OVER 1.27Hm MIN. NICKEL UNDERPLATE. PA ES 0.03 MAX (-) SOLDERTAL: 2.544m MIN. TIN OVER 4.27Hm MIN. | PN 26 PN et / \ R030 NICKEL UNDERPLATE. 75 A (4X) SMT NAIL: 2.544 MIN. TIN OVER 4.27hm MIN. tm pe 0.40 0.05 {OF DATUM B RO.20 NICKEL UNDERPLATE. [6] 0.20)6) (4X) /A\MOLEX LOGO LOCATED APPROXIMATELY AT 35.29 0.15 SHOWN. 4. NON FUNCTIONAL CORE HOLES ARE SUBJECTED TO CHANGE WITHOUT NOTICE. 0.60 an 40.43 4045 5. MATES WITH iVDR PLUG SERIES 78158. : +0.08 5 . +0/ (2X) S10 2015 6. BLISTERING ON CAP IS ACCEPTABLE. | 38.65 +0.15 __ { | = 3.50 +0.08 |. 0.2085] 30 k C 0.35 +005 4.40 +0.10 | | 0.502005 (2X) AN 20-7] 40 20. 4.70 0.08 ~- X (\ | { AM PTTL a ye | mole 370 7 sadhos 7.70 1.40 0.15 | 7.98 PIN #4, 4, 7, 8, (7.70) | scoot 4 15. 18 r TI Hae Hp ea A a iil 1.90 40.15 a | HA AK AA a HH HEM UUM | Y { | Ly | 0.68 | (45.84) | | L286) -| (4.60) bE =a aaa QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD LE SSS |sympo_s| (UNLESS SPECIFIED) MM ONLY NTS METRIC PARE ANG TION Ss Ss Ss mm INCH DRAWN BY DATE TITLE ma ~SSl2\WF-0 [7 PLAcES|+--- [#--- _ SCHEONG 2007/08/31 127MM PITCH, 26 CKTS S 3 PLACES $--- +--- CHECKED BY DATE R/A, SMT ee _|8//-0 [2 PLAcES|+0.20 [+-- [GOH 2007/09/17 IVDR_ RECEPTACLE wes 2) TPLACE |E--- |-- APPROVED BY DATE AASSS ANGULAR + 3 KCLING 2007/09/18 rfolex MOLEX INCORPORATED Wi S 25 oe MATERIAL NO. DOCUMENT NO. SHEET NO. Does DRAFT WHERE APPLICABLE] 78159-0001 SD-78159-001 1 0F 4 PuUoa5<|_ WITCH? DIMENEADNS SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A iw A ZIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 6 5 | 4 | 3 | 2 | 1tb_frame_A3_P_AM_T 10 9 7 6 5 4 3 2 1 (4.25) CAP aly J vd _ @ @ bp (4.25) FCy ok _ A = t (15.00) CAP (41.43) / $170 +0.08 10.05 +0.10 a J @ I) WL I 40 40.05 ilt D170 +0.08 oa [0 20@/0-Ep j 38.00 +0.08 I= 5.80 0.13 (2X) a a a QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SSS| |sywgos| (UNLESS SPECIFIED) MM ONLY NTS | METRIC |/ Claagection Ss ss mm INCH DRAWN BY DATE TITLE o S85 /ZIWy-0 PLAS |E--- [E- CHEONG 7007/08/31 1.27MM PITCH, 26 CKTS S 3 PLACES |/+--- +--- CHECKED BY DATE R/A, SMT ee _|8//-0 [2 PLAcES|+0.20 [+-- [GOH 2007/09/17 IVDR_ RECEPTACLE wo Cx 2 Ww 4 PLACE J--- +--- APPROVED BY DATE AAZSS ANGULAR + 3 CLING 2007/09/18 rfolex MOLEX INCORPORATED wis SAR MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=e DRAFT WHERE APPLICABLE] 78159-0001 SD-78159-001 2 OF 4 et OG =e _ WITHIN CREAN is 74E) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A # INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Rev. E 2006/04/15 5 | | 3 2 | 110 5 8 7 6 5 4 3 2 1 31.75 t= 0.80 +0.05 (26x) PD 1.78 *p.ce (11.61) a! TT MUCUUUQUQUOUUUUCUUUUU | Lp a p= 3.20 0.05 (26X) NS N NN nN t- tb_frame_A3_P_AM_T Rev. E 2006/04/15 (1.50) (9.49) V-CUT -| ~_ 2.60 P+ 6.30 38.00 +0.03 (51.84) RECOMMENDED PCB THICKNESS: 1.60+0.10 S887 [quay] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SSS| |symaots| (UNLESS SPECIFIED) MM ONLY nts | metric [OCIARRR ANS Ss Ss Ss mm INCH DRAWN BY DATE TITLE ma ~SSl2\WF-0 [7 PLAcES|+--- [#--- _ SCHEONG 2007/08/31 127MM PITCH, 26 CKTS 5 f 3 PLACES |[--~ _[--- __[PHECKED BY DATE R/A, SMT ee _|8//-0 [2 PLAcES|+0.20 [+-- [GOH 2007/09/17 IVDR_ RECEPTACLE wss_ 2/4 TPLACE [E--- [- APPROVED BY DATE QAESS ANGULAR + 3 CLING 2007/09/18 rfolex MOLEX INCORPORATED wd 2S oe MATERIAL NO. DOCUMENT NO. SHEET NO. Do e=t DRAFT WHERE ATEN ICABLE 78159-0001 SD-78159-001 3 0F 4 SW OS = WITHIN CREAN is SZET THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A ie INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 6 5 4 | 3 2 110 5 8 EMBOSSED CARRIER TAPE PACKAGING DETAILS F Ao 16.18+0.10 Bo 51.30+ 0.10 Ko 6.45+ 0.10 EF 34.204 0.15 P41 20,00+0.10 Sa 68.40+0.10 W 72,000,530 E D RO.75 Oo \. 620 0.05 ee | DETAIL C NOTES: 4. LEADER AND TRAILER TAPE 160 MIN. 390 MIN TOP TAPE TOP TAPE NON TRAILER BONDED TAPE COMPONENT 230MIN. | LEADER PART (EMPTY) B 160 MIN. - TAIL_PART (EMPTY) 2. PEELING OFF FORCE OF THE TOP TAPE: 20 - 80gf. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) ~~ _PEEL OFF DIRECTION 15 MAX. EE PULL OUT DIRECTION A 3. TAPE AND REEL SPECIFICATION IS AS PER EIA-481, 4. TAPE AND REEL QUANTITY : 500 PCS/ REEL. 5. THE TAPE IS TREATED FOR ANTI-STATIC. 2150 9 (PILOT aa CUSTOMER PULL-OUT DIRECTION 2.00 4.00 PULL OUT DIRECTION tb_frame_A3_P_AM_T 5 8 Rev. E 2006/04/15 Soo see Soooooeooooeegeggeggeoo o o |] Ze 4.75 R is i] F E r : 74 ee Z s E Z o & 2 ~~ LJ LJ Q-oooo oo oo oo 16666 9/6009 DETAIL1 /- An >] Pt es cee | PULL OUT DIRECTION _> REEL aaa QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SSS] |symgacs| (UNLESS SPECIFIED) MM ONLY NTS METRIC | C1 PROJECTION Ss Ss Ss mm INCH DRAWN BY DATE TITLE ma ~SSl2\WF-0 [7 PLAcES|+--- [#--- _ SCHEONG 2007/08/31 127MM PITCH, 26 CKTS S 3 PLACES |/+--- +--- CHECKED BY DATE R/A, SMT ee _|8//-0 [2 PLAcES|+0.20 [+-- [GOH 2007/09/17 IVDR_ RECEPTACLE wss_=2|/4 4 PLACE [E--- [4--- APPROVED BY DATE AAZSS ANGULAR + 3 CLING 2007/09/18 rfolex MOLEX INCORPORATED wd 2S oe MATERIAL NO. DOCUMENT NO. SHEET NO. Doe<e DRAFT WHERE APPLICABLE] 78159-0001 SD-78159-001 4 0F 4 DE SG tl WITHIN CREAN is >4E! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A # INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 5 | 4 | 3 | 2 | 1