Product Specification - Jan 20, 2011 V.8 DATA SHEET CHIP RESISTORS Packing Product specification Chip Resistor Surface Mount 2 7 Packing PACKING TAPE AND REEL SPECIFICATIONS All tape and reel specifications are in accordance with "IEC 60286-3". Basic dimensions are given in Figs 1, 2 and 5, and Tables 1, 2 and 3. PAPER R/PE TAPE ADVANTAGE - PE TAPE MATERIAL CHARACTERISTIC - PE TAPE Better PE Less anti-moisture fiber Meet "ISO 14000" environmental regulation Conform to "ISO14000" environmental packing and American F.D.A restraint regulations. is a polymer material commonly used for food containers, plastic bags and toys, so is safe for human beings. In addition, it is recyclable. P0 T D0 P2 E F cover tape W B0 A0 P1 MBG251 Fig. 1 Paper/PE tape Table 1 Dimensions of paper/PE tape for relevant chip resistors size; see Fig.1 PRODUCT SIZE SYMBOL CODE B0 W E F P0 A0 Unit: mm P1 P2 OD0 T 0201 0.35 0.10 0.65 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 2.0 0.05 2.0 0.05 1.5 +0.1/-0 0.35 0.10(1) 0402 0.65 0.10 1.15 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 2.0 0.05 2.0 0.05 1.5 +0.1/-0 0.53 0.10 0603 1.10 0.10 1.90 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.05 2.0 0.05 1.5 +0.1/-0 0.70 0.10 0805 1.65 0.10 2.40 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.05 2.0 0.05 1.5 +0.1/-0 0.85 0.10 1206 1.90 0.10 3.50 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.05 2.0 0.05 1.5 +0.1/-0 0.85 0.10 1210 2.80 0.10 3.50 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.05 2.0 0.05 1.5 +0.1/-0 0.85 0.10 0404/ 2 x 0402 1.20 0.10 1.20 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 2.0 0.05 2.0 0.05 1.5 +0.1/-0 0.53 0.10 2 x 0603 (4P2R) 2.00 0.10 2.00 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.10 2.0 0.05 1.5 +0.1/-0 0.85 0.05 4 x 0402 1.20 0.10 2.20 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 2.0 0.05 2.0 0.05 1.5 +0.1/-0 0.70 0.10 4 x 0603 2.00 0.10 3.50 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.05 2.0 0.05 1.5 +0.1/-0 0.85 0.10 0616 (16P8R) 1.80 0.20 4.40 0.20 12.0 0.30 1.75 0.10 5.5 0.05 4.0 0.10 4.0 0.05 2.0 0.05 1.5 +0.1/-0 0.70 0.10 0612 (10P8R) 2.00 0.10 3.50 0.10 8.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.05 2.0 0.05 1.5 +0.1/-0 0.85 0.10 NOTE 1. For size 0201, the typical value of thickness (excluding cover tape) is 0.42 mm for paper tape and 0.33 mm for PE tape. www.yageo.com Jan 20, 2011 V.8 Product specification Chip Resistor Surface Mount 3 7 Packing EMBOSSED/BLISTER TAPE ENVIRONMENTAL CONSIDERATIONS Cover tape, carrier tape and reel do not contain environmentally harmful PVC materials. Cover tape and reel are antistatic. Because the carrier tape is made of polycarbonate, a homogeneous material (monoplastic), it is ideally suited for recycling. Compared to other PVC-free materials polycarbonate shows excellent stiffness and very little deformation with temperature. EMBOSSED/BLISTER TAPE P0 D0 P2 E F cover tape W B0 MBG516_b A0 T D1 P1 direction of unreeling Fig. 2 Embossed/blister tape Table 2 Dimensions of embossed/blister tape for relevant chip resistors size; see Fig.2 PRODUCT SYMBOL SIZE CODE A0 B0 W E F P0 P1 P2 Unit: mm OD0 OD1 T 1218 3.50 0.20 4.80 0.20 12 0.20 1.75 0.10 5.5 0.05 4.0 0.10 4.0 0.10 2.0 0.05 1.5 +0.1/-0 1.50 +0.25/-0 1.0 0.10 2010 2.80 0.20 5.40 0.20 12 0.20 1.75 0.10 5.5 0.05 4.0 0.10 4.0 0.10 2.0 0.05 1.5 +0.1/-0 1.50 +0.25/-0 1.0 0.10 2512 3.50 0.20 6.70 0.20 12 0.20 1.75 0.10 5.5 0.05 4.0 0.10 4.0 0.10 2.0 0.05 1.5 +0.1/-0 1.50 +0.25/-0 1.0 0.10 1220 (8P4R) 3.20 0.20 5.60 0.20 12 0.20 1.75 0.10 5.5 0.05 4.0 0.10 4.0 0.10 2.0 0.05 1.5 +0.1/-0 1.50 +0.25/-0 1.0 0.10 1225 (10P8R) 3.50 0.20 6.70 0.20 12 0.20 1.75 0.10 5.5 0.05 4.0 0.10 4.0 0.10 2.0 0.05 15+ 0.1/-0 1.50 +0.25/-0 1.0 0.10 www.yageo.com Jan 20, 2011 V.8 Product specification Chip Resistor Surface Mount 4 7 Packing LEADER/TRAILER TAPE SPECIFICATION leader end empty compartments with cover tape (min. 200 mm) trailer end trailer (max. 260 mm) cover tape only leader 350 mm CCB325 Fig. 3 Leader/trailer tape TAPING REQUIREMENTS Resistance side faces up. Component is free and not sticking to top and/or bottom tape. Component should be easy to remove from carrier tape and the chip cavity should have no mechanical damage. PEEL-OFF FORCE Peel-off forces of both paper/PE and embossed/blister tapes are in accordance with "IEC 60286-3"; that is, at a peel-off speed of 300 10 mm/minute, 0.1 N to 1.0 N for 8 mm tape and 0.1 N to 1.3 N for tape larger than 8 mm. The peel-off angle should be between 165 and 180. peeling direction 10 top cover tape CCB289 carrier tape Fig. 4 Peel-off force www.yageo.com Jan 20, 2011 V.8 Product specification Chip Resistor Surface Mount 5 7 Packing REEL SPECIFICATION W2 D C N A HBK039_a W1 Fig. 5 Reel Table 3 Dimensions of reel specification for relevant chip resistors size; see Fig.5 REEL SIZE PRODUCT QUANTITY SIZE CODE 8 mm tape width 12 mm tape width PER REEL unit: mm SYMBOL A N C D W1 W2 max. 10,000 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 13" (O330 mm) --- 330 +0/-3 100 0.5 13.5 0.5 10.0 0.5 14.0 0.5 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 20,000 10" (O254 mm) --- 254 +0/-3 13.0 0.2 9.8 0.5 13.0 0.5 50,000 13" (O330 mm) --- 330 +0/-3 5,000 7" (O178 mm) --- 180 +0/-3 10,000 10" (O254 mm) --- 254 +0/-3 20,000 13" (O330 mm) --- 330 +0/-3 5,000 7" (O178 mm) --- 180 +0/-3 20,000 13" (O330 mm) --- 330 +0/-3 100 0.5 13.5 0.5 10.0 0.5 14.0 0.5 1218 4,000 --- 7" (O178 mm) 180 +0/-3 2010 4,000 --- 7" (O178 mm) 180 +0/-3 60 +1/-0 13.5 0.5 13.6 0.5 16.5 0.5 2512 4,000 --- 7" (O178 mm) 180 +0/-3 0201 15,000 20,000 50,000 10,000 0402 0603/ 0805/1206 1210 20,000 100 0.5 13.5 0.5 60 +1/-0 13.0 0.2 21.0 0.8 10.0 0.5 14.0 0.5 9.0 0.2 12.0 0.2 13.0 0.2 9.8 0.5 13.0 0.5 13.5 0.5 10.0 0.5 14.0 0.5 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 100 0.5 www.yageo.com Jan 20, 2011 V.8 Product specification Chip Resistor Surface Mount 6 7 Packing Table 4 Dimensions of reel specification for relevant chip resistor size; see Fig.5 (continued) PRODUCT SIZE CODE TYPE 0404 ATV321 2 x 0402 (4P2R) YC/TC122 4 x 0402 (8P4R) YC/TC124 2 x 0603 (4P2R) YC/TC162 4 x 0603 (8P4R) YC/TC164 REEL SIZE QUANTITY PER REEL 8 mm tape width 12 mm tape width unit: mm SYMBOL A N C D W1 W2 max. 10,000 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 10,000 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 50,000 13" (O330 mm) --- 330 +0/-3 100 0.5 13.5 0.5 10.0 0.5 14.0 0.5 10,000 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 40,000 13" (O330 mm) --- 330 +0/-3 100 0.5 13.5 0.5 10.0 0.5 14.0 0.5 10,000 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 5,000 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 20,000 13" (O330 mm) --- 330 +0/-3 100 0.5 13.5 0.5 10.0 0.5 14.0 0.5 1220 (8P4R) YC324 4,000 --- 7" (O178 mm) 180 +0/-3 60 +1/-0 13.5 0.5 13.6 0.5 16.5 0.5 0616 (16P8R) YC248 5,000 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 5,000 7" (O178 mm) --- 180 +0/-3 60 +1/-0 13.0 0.2 9.0 0.2 12.0 0.2 20,000 13" (O330 mm) --- 330 +0/-3 100 0.5 13.5 0.5 10.0 0.5 14.0 0.5 4,000 --- 7" (O178 mm) 180 +0/-3 60 +1/-0 13.5 0.5 13.6 0.5 16.5 0.5 0612 (10P8R) YC158 1225 (10P8R) YC358 21.0 0.8 9.0 0.2 12.0 0.2 www.yageo.com Jan 20, 2011 V.8 Product specification Chip Resistor Surface Mount 7 7 Packing REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 8 Jan 20, 2011 - - Packing specifications for size 0201updated - Taping reel -10" reel for size 0201 removed Version 7 Dec 21, 2010 - - Extended quantity per reel for size 0201 and 0402 Version 6 Apr 03, 2008 - - Size 2 x 0603 extended and updated in PE tape and reel specification - Updated Fig. 3 for leader/trailer tape specification Version 5 Nov 16, 2004 - - PE tape added - Bulk-case removed. - Yageo /Phycomp brand combined Version 4 Jul 25, 2003 - - Updated company logo Version 3 Jul 16, 2001 - - 0201 packing information added Version 2 May 30, 2001 - - Converted to Phycomp brand www.yageo.com Jan 20, 2011 V.8