Advanced Power Solutions 5/4/01 AC TO DC EXTERNAL WALLMOUNT ADAPTOR 2-BLADE USA OR EURO-STECKER AC PLUG SINGLE OUTPUT 5 WATTS SWITCHING POWER SUPPLIES APS05ES SERIES FEATURES: ! VERY SMALL & COMPACT IN SIZE ! 2-BLADE USA OR EURO-STECKER AC PLUG ! EMI MEET EN55022 / FCC CLASS B ! MEETS USA, JAPAN AND EUROPEAN STANDARDS ! CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: 90-132 or 90-264Vac typical Input Connector: 2-blade USA WM1 or Euro-Stecker WM3 AC plug Input Frequency: 47-63Hz Inrush Current: Typical 27A @ 230Vac Input Current: 0.16-0.12A within 90-132Vac or 0.16-0.07A within 90-264Vac Dielectric Withstand: Meet IEC 950 EMI: Meets EN55022 / FCC Class B Hold-up Time: 15mS @ 115Vac or 32mS @ 230Vac typical Output Voltage: See Ratings Chart Output Current: See Ratings Chart Output Wattage: 5 Watts typical Output Connector: Optional Line Regulation: 0.1% typical Load Regulation: 1.5 to 3.0% Noise & Ripple: 1% peak to peak typical OVP: Built-in, Zener diode clamping Adjustability: Factory set Overload Protection: Typ. 125 to 150% of max. power Over-range or short circuit, power foldback & self-recovering GENERAL SPECIFICATION Efficiency: 70% typical Switching Frequency: 50 to 200KHz Circuit Topology: Free running flyback circuit Transient Response: Output voltage returns in less than 3mS following a 25% load change Safety Standard: UL1950 / EN60950 Class II 3 Power Density: 1.00 Watts. / Inch Operating Temperature: 0 to +40C Storage Temperature: -20C to +85C Temperature Coefficient: 0.04% per C Cooling: Free air convection Construction: Impact resistant plastic enclosure case Wallmount format Notes: (1) All measurements are at nominal input, full load, and +25C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires. For the details of safety approval, please consult the factory. MODEL NO. DESCRIPTION: APS05ES/N XXX YYY - S INPUT AC PLUG: [1] WM1, [3] WM3 OUTPUT CURRENT OUTPUT VOLTAGE INPUT VOLTAGE "1": 90-132Vac, "3": 90-264Vac SERIES NAME (External Switcher): About 5W OUTPUT VOLTAGE/CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE (Vdc) 3.3 Vdc < Any Voltage > 12.0Vdc 12.0Vdc < Any Voltage > 24.0Vdc OUTPUT VOLTAGE (Vdc) / CURRENT (A) 3.3-4.0V/1.25-1.2A, 4.1-4.9V/1.18-1.02A, 5.0-6.4V/1.0-0.8A, 6.5-7.5V/0.79-0.7A, 7.6-8.7V/0.69-0.6A, 8.8-10.5V/0.59-0.5A, 10.6-11.9V/0.49-0.44A. 12.0-13.0V/0.43-0.4A, 13.1-15.0V/0.4-0.35A, 15.1-17.4V/0.34-0.3A, 17.5-18.7V/0.29-0.28A, 18.8-20.9V/0.27-0.25A, 21.0-24.0V/0.24-0.2A. Note: Refer to the upper Chart or consult factory for the exact Model No. and V/A ratings. SINGLE OUTPUT (Model No. for example.) MODEL NO. AC INPUT AC PLUG APS05ES/1-033125-1 APS05ES/3-035123-3 APS05ES/3-036122-1 APS05ES/1-050100-1 APS05ES/3-052096-1 APS05ES/3-053094-3 APS05ES/1-090057-1 APS05ES/3-120043-1 APS05ES/3-150035-3 APS05ES/1-180028-1 APS05ES/3-240020-3 90-132Vac 90-264Vac 90-264Vac 90-132Vac 90-264Vac 90-264Vac 90-132Vac 90-264Vac 90-264Vac 90-132Vac 90-264Vac WM1 WM3 WM1 WM1 WM1 WM3 WM1 WM1 WM3 WM1 WM3 MECHANICAL DIMENSIONS: MM [INCHES] O/P VOLTAGE 3.3V 3.5V 3.6V 5.0V 5.2V 5.3V 9.0V 12.0V 15.0V 18.0V 24.0V O/P CURRENT 1.25A 1.23A 1.22A 1.00A 0.96A 0.94A 0.57A 0.43A 0.35A 0.28A 0.20A WEIGHT: 113g (4.0 Oz.)