5/4/01
AC TO DC EXTERNAL WALLMOUNT ADAPTOR 2-BLADE USA
OR EURO-STECKER AC PLUG SINGLE OUTPUT 5 WATTS
SWITCHING POWER SUPPLIES APS05ES SERIES
Advanced Power Solutions
FEATURES:
! VERY SMALL & COMPACT IN SIZE
! 2-BLADE USA OR EURO-STECKER AC PLUG
! EMI MEET EN55022 / FCC CLASS B
! MEETS USA, JAPAN AND EUROPEAN STANDARDS
! CE MARKING COMPLIANCE
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart
Output Current: See Ratings Chart
Output Wattage: 5 Watts typical
Output Connector: Optional
Line Regulation: 0.1% typical
Load Regulation: ±1.5 to 3.0%
Noise & Ripple: 1% peak to peak typical
OVP: Built-in, Zener diode clamping
Adjustability: Factory set
Overload Protection: Typ. 125 to 150% of max. power
Over-range or short circuit, power foldback
& self-recovering
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: 90-132 or 90-264Vac typical
Input Connector: 2-blade USA WM1 or
Euro-Stecker WM3 AC plug
Input Frequency: 47-63Hz
Inrush Current: Typical 27A @ 230Vac
Input Current: 0.16-0.12A within 90-132Vac or
0.16-0.07A within 90-264Vac
Dielectric Withstand: Meet IEC 950
EMI: Meets EN55022 / FCC Class B
Hold-up Time: 15mS @ 115Vac or
32mS @ 230Vac typical
GENERAL SPECIFICATION
Efficiency: 70% typical
Switching Frequency: 50 to 200KHz
Circuit Topology: Free running flyback circuit
Transient Response: Output voltage returns in
less than 3mS following a 25% load change
Safety Standard: UL1950 / EN60950 Class II
Power Density: 1.00 Watts. / Inch3
Operating Temperature: 0 to +40°C
Storage Temperature: -20°C to +85°C
Temperature Coefficient: 0.04% per °C
Cooling: Free air convection
Construction: Impact resistant plastic enclosure case
Wallmount format
Notes: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied fr om half load t o full load ( ±%).
(3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires.
For the details of safety approval, please consult the factory.