MHDR Rugged HDMI Product Specification S6089C Rev 1.4 About Amphenol Commercial Products Amphenol's commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. Related Products MUSB/MUSBR OPTIONS: MUSBR MHDR-A111-30 TYPE A, RIGHT ANGLE MHDR-A511-30 TYPE A, VERTICAL Overview MUSBR-A511-40 TYPE A, VERTICAL, LOW PROFILE MUSB This Product Specification defines the general use and performance parameters for Amphenol's MHDR connector. Availability: Right angle PCB tail version as well as vertical mount receptacle are presently available. The right angle is also available on on interposer card with a right angle locking connector on the opposite side. Usage MUSB-D111-30 TYPE B, RIGHT ANGLE These connectors provide a High Definition Multimedia Interface for transmitting digital audiovisual signals. Receptacles will mate with any standard type A HDMI plug. Electrical performance complies with HDMI specification version 2.0. This supports 4K video up to 60 frames per second. Connectors provide water and dust protection complying with IP67 per IEC 60529. Applications Intended for use in applications such as: Portable computers Outdoor Audiovideo equipment Portable broadcast equipment Medical equipment Digital cameras/camcorders MUSB-C111-30 TYPE A, STACKED, RIGHT ANGLE Revision date: May 17,2017 Page 1 of 3 S6089C Rev 1.4 About Amphenol Commercial Products Amphenol's commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. Related Products Connector Electrical Characteristics Parameter Current rating: Contact resistance: Insulation resistance: DWV: Impedance: Total data rate: Type A 0.5A min per contact 10 m max 1000 M min 500V AC @ sea level 100 +/-15% 18Gbit/s Connector Mechanical Characteristics Thermal Shock: 10 cycles @ -55 to +125 C Physical Shock: 50G for 11ms (3 cycles in 3 axes) Humidity: Per ANSI/EIA-364-31B Vibration: Per ANSI/EIA-364-28 Condition III MDBR Process Characteristics Recommended soldering process: wave soldering with peak temperature of 260C for 10 seconds. Recommended Torque for #4-40 or M3 Panel Mount Screws: 0.45 to 0.65 Nm (4 - 5.75 in-lbs). Solder tails suitable for PCB thickness of 1.52mm (.062") Mating Cycles: 10,000 cycles 9 POSITION CONNECTOR SHOWN MUSBK Material Requirements MHDR connectors are RoHS compliant. Unless otherwise specified, the materials for each component shall be: Contacts: Copper alloy with 30" (0.76m) min gold over 50" (1.27m) min nickel Housing: Engineering thermoplastic, UL94V-0 rated, black. Shell: Die cast zinc alloy with nickel plating Operating temperature -55 to +85 C MUSB-K152-30 SERIES MICRO-AB RIGHT ANGLE, PCB TAIL MRJR Available Documents Drawing Numbers: P-MHDR-A111-X0 P-MHDR-A311-X0 P-MHDR-A311-M01 P-MHDR-A511-X0 MHDR series rugged HDMI, Type A, Right Angle PCB Tail MHDR series rugged HDMI, Type A, on PCB with matching HDMI MHDR series rugged HDMI, Type A, on PCB with matching HDMI with locking tab. MHDR series rugged HDMI, Type A. Vertical PCB Tail Contact factory, authorized Amphenol representative or website www.amphenolcanada.com for additional configurations MRJR-538X-01 SHOWN RIGHT ANGLE, PCB TAIL, 8 POSITION RJ45 Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 Page 2 of 3 Copyright (c) Amphenol Corporation 2017 * All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP. S6056C Rev 1.4 Product Numbering System MHDR MHDR - A X 1 1 - X 0 Rugged HDMI Receptacle Series Receptacle Type A - Standard A Series Termination Style 1 - Right Angle 5 - Vertical Number of Contacts 1 - Standard 19 Contacts Insulator Housing Colour 1 - Black Rear Shield and Thread Options 3 - #4-40 UNC Unified Thread M - M3 x 0.5 Metric Thread Other Options 0 - Standard Unique Special Code1 No Digit - Standard part defined by previous 10 digits 1 to 9 - Unique special feature Notes: 1) Consult with Amphenol for additional termination styles, contact tail lengths, mounting styles, non-conductive gaskets or other special requirements. Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 Page 3 of 3 Copyright (c) Amphenol Corporation 2017 * All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP. X