Revision date: May 17,2017 Page 1 of 3
Overview
This Product Specification defines the general use and performance parameters for Amphenol’s
MHDR connector.
Availability: Right angle PCB tail version as well as vertical mount receptacle are presently
available. The right angle is also available on on interposer card with a right angle locking
connector on the opposite side.
Usage
These connectors provide a High Definition Multimedia Interface for transmitting digital
audiovisual signals. Receptacles will mate with any standard type A HDMI plug. Electrical
performance complies with HDMI specification version 2.0. This supports 4K video up to 60
frames per second. Connectors provide water and dust protection complying with IP67 per IEC
60529.
Applications
Intended for use in applications such as:
Portable computers
Outdoor Audiovideo equipment
Portable broadcast equipment
Medical equipment
Digital cameras/camcorders
MHDR Rugged HDMI
Product Specification S6089C Rev 1.4
MHDR-A111-30
TYPE A, RIGHT ANGLE
About Amphenol
Commercial Products
Amphenol’s commercial
connector products are
used in a variety of end
user applications
including networking,
telecom, server &
computer, storage &
HDD, consumer
electronics and
entertainment,
professional audio &
Industrial &
Military/Aerospace.
Related Products
MUSB/MUSBR OPTIONS:
MUSBR
MUSBR-A511-40
TYPE A, VERTICAL,
LOW PROFILE
MUSB
MUSB-D111-30
TYPE B, RIGHT ANGLE
MUSB-C111-30
TYPE A, STACKED,
RIGHT ANGLE
MHDR-A511-30
TYPE A, VERTICAL
Amphenol Canada Corp. Page 2 of 3
605 Milner Avenue
Toronto, Ontario, Canada, M1B 5X6 Copyright © Amphenol Corporation 2017 • All rights reserved
+1 416 291 4401
www.amphenolcanada.com
S6089C Rev 1.4
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.
Connector Electrical Characteristics
Parameter Type A
Current rating: 0.5A min per contact
Contact resistance: 10 m max
Insulation resistance: 1000 M min
DWV: 500V AC @ sea level
Impedance: 100 +/-15%
Total data rate: 18Gbit/s
Connector Mechanical Characteristics
Thermal Shock: 10 cycles @ -55° to +125° C
Physical Shock: 50G for 11ms (3 cycles in 3 axes)
Humidity: Per ANSI/EIA-364-31B
Vibration: Per ANSI/EIA-364-28 Condition III
Process Characteristics
Recommended soldering process: wave soldering with peak temperature of 260°C for 10 seconds.
Recommended Torque for #4-40 or M3 Panel Mount Screws: 0.45 to 0.65 Nm (4 – 5.75 in-lbs).
Solder tails suitable for PCB thickness of 1.52mm (.062”)
Mating Cycles: 10,000 cycles
Material Requirements
MHDR connectors are RoHS compliant.
Unless otherwise specified, the materials for each component shall be:
Contacts: Copper alloy with 30µ” (0.76µm) min gold over 50µ” (1.27µm) min nickel
Housing: Engineering thermoplastic, UL94V-0 rated, black.
Shell: Die cast zinc alloy with nickel plating
Operating temperature -55° to +85° C
Available Documents
Drawing Numbers:
P-MHDR-A111-X0 MHDR series rugged HDMI, Type A, Right Angle PCB Tail
P-MHDR-A311-X0 MHDR series rugged HDMI, Type A, on PCB with matching HDMI
P-MHDR-A311-M01 MHDR series rugged HDMI, Type A, on PCB with matching HDMI with locking tab.
P-MHDR-A511-X0 MHDR series rugged HDMI, Type A. Vertical PCB Tail
Contact factory, authorized Amphenol representative or website www.amphenolcanada.com for additional configurations
About Amphenol
Commercial Products
Amphenol’s commercial
connector products are
used in a variety of end
user applications
including networking,
telecom, server &
computer, storage &
HDD, consumer
electronics and
entertainment,
professional audio &
Industrial &
Militar
y
/Aeros
p
ace.
Related Products
MDBR
MUSBK
MRJR
9 POSITION CONNECTOR
SHOWN
MRJR-538X-01 SHOWN
RIGHT ANGLE, PCB TAIL,
8 POSITION RJ45
MUSB-K152-30
SERIES MICRO-AB
RIGHT ANGLE, PCB TAIL
Amphenol Canada Corp. Page 3 of 3
605 Milner Avenue
Toronto, Ontario, Canada, M1B 5X6 Copyright © Amphenol Corporation 2017 • All rights reserved
+1 416 291 4401
www.amphenolcanada.com
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.
S6056C Rev 1.4
Product Numbering System
MHDR
-
A
X 1 1
-
X
0
X
MHDR Rugged HDMI Receptacle Series
Receptacle Type
A – Standard A Series
Termination Style
1 – Right Angle
5 – Vertical
Number of Contacts
1 - Standard 19 Contacts
Insulator Housing Colour
1 – Black
Rear Shield and Thread Options
3 – #4-40 UNC Unified Thread
M – M3 x 0.5 Metric Thread
Other Options
0 – Standard
Unique Special Code1
No Digit – Standard part defined by previous 10 digits
1 to 9 – Unique special feature
Notes:
1) Consult with Amphenol for additional termination styles, contact tail lengths, mounting styles, non-conductive gaskets or other special requirements.