Relays, Contactors, Timers, Transformers and Circuit Breakers For General Purpose Applications TYCO ELECTRONICS CORPORATION WWW.TYCOELECTRONICS.COM Catalog 1308242 Revised 3-03 AGASTAT AXICOM KILOVAC OEG P&B PRODUCTS UNLIMITED SCHRACK Catalog 1308242 Revised 3-03 Relays, Contactors, Timers, Transformers and Circuit Breakers For General Purpose Applications This page intentionally left blank. Relays, Contactors, Timers, Transformers and Circuit Breakers for General Purpose Industrial & Commercial Applications This technical databook includes specification information for a broad selection of components. Electromechanical relays, contactors, timers, solid state relays, input/output modules, sensors, protective relays, magnetic circuit breakers, thermal circuit breakers and transformers are all described in the databook. Locating a product in this databook Immediately following this introductory page is an alphanumeric index of the product series in this databook. This is helpful if you already know the series designator of the product for which you are seeking specifications. The index is followed by a selector guide that provides a brief overview of the various series in our extensive product line. This is intended to help you quickly determine which product series may be best suited for a given application. The selector guide also lists the page number in the databook where much more detailed specifications for each series may be found. Need more help selecting a product series? The body of this databook is divided into 14 major product categories. Each section begins with an alphanumeric index of the product series contained therein. Additionally, a "question tree" is included on the first or second page of several sections to help in narrowing your search to product series that may be appropropriate for a given application. While by no means definitive, these tools can prove to be an effective starting point. Finding out more details If you need additional specification information , please contact Tyco Electronics Technical Support (see inside back cover for Technical Support contact information.) Information about our products also can be found on our website at http://relays.tycoelectronics.com. Our website is updated more frequently than the printed technical databook, so you may find information there which is more current than our databook. Note regarding product availability This databook lists a broad range of products which are available with varying leadtimes. Some are normally maintained in stock for immediate delivery. Many other products are available within what would be considered "normal" leadtimes for our industry. However, there may be extended leadtimes for some nonstock items. Additionally, there are minimum quantity requirements. You should consult with your Tyco Electronics authorized distributor or sales engineer regarding availability and minimum order requirements before specifying a particular non-stock model. Changes in specifications/availability We constantly endeavor to enhance the quality of our products and update our product offering; therefore, specifications and product availability are subject to change without notice. Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this databook, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this databook) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this databook are for reference purposes only and are subject to change without notice. Dimensions are in inches over (millimeters), unless otherwise specified. Specifications are subject to change without notice. Consult Tyco Electronics at 1-800-522-6752 for latest dimensions and design specifications, or use the global contact list shown on inside back cover. AGASTAT, AMP, AXICOM, CII, HARTMAN, KILOVAC, OEG, P&B, POTTER & BRUMFIELD, PRODUCTS UNLIMITED, SCHRACK and TYCO are trademarks. Other products, logos and company names mentioned herein may be trademarks of their respective owners. (c) 2003 by Tyco Electronics Corporation. All rights reserved. i Catalog 1308242 Issued 3-03 PRODUCT INDEX Alphanumeric Index Series Type Page 0409 (Hi-Inrush) .......... 10A, One-pole PC Board Relay ................................................. 488 0410 .............................. 16A, One-pole PC Board Relay ................................................. 491 0419 .............................. Relay w/Dust Cover .................................................................... 745 0429 (Hi-Inrush) .......... 10A, One-pole PC Board Relay ................................................. 457 0430 .............................. 10-16A, One- or Two-pole PC Board Relay ............................ 495 136 ................................ Traffic Light (Flash Transfer) Relay ......................................... 916 159/160 ......................... Mercury-Wetted Reed Relays .................................................. 308 190 ................................ DPDT, THT Low-signal PC Board Relay .................................. 331 2100 .............................. Miniature Electropneumatic Timer ........................................ 1254 2IO ................................ Mtg. Board for Standard I/O Modules .................................. 1114 2IOM ............................ Mtg. Board for Slim Line I/O Modules .................................. 1122 38 .................................. Power Relay ................................................................................ 818 3RP15 ........................... Programmable Time Delay Relay ........................................... 1207 4000 .............................. 5-30VA Transformer, Wire Leads, Class II ............................. 204 4000 .............................. 10-30VA Transformer, QC Terminals, Class II ........................ 205 4000 .............................. 20-40VA Transformer, Plate Mount, Class II .......................... 206 4000 .............................. 40-50VA Transformer, Wire Leads, Class II ........................... 207 4000 .............................. 40-50VA Transformer, QC Terminals, Class II ........................ 208 4000 .............................. 60-75VA Transformer, Wire Leads, Class II ........................... 209 4000 .............................. 60-75VA Transformer, QC Terminals, Class II ........................ 210 4700 .............................. 60-150VA Transformer, Wire Leads, UL 508 ........................... 211 48K ............................... Programmable Time Delay Relay ........................................... 1210 491 ................................ 20A AC Coil PCB or Panel Mt. Relay ......................................... 509 57 .................................. Transformer Relay for HVAC .................................................... 212 600 ................................ 3-15A, One-pole PC Board Relay ............................................. 497 7000 .............................. Electropneumatic Timer .......................................................... 1248 9100 .............................. Power Relay ................................................................................ 816 9400 .............................. Power Relay ................................................................................ 814 AGASTAT Timer Accessories ........................................................................................ 1206 AGASTAT Timer Terms and Definitions ....................................................................... 1204 AGASTAT Timer Timing Modes ..................................................................................... 1205 Agency Approval Information ............................................................................................. iv Card E (V23057) .......... 8A, One-pole PC Board Relay ................................................... 480 CB ................................. Discrete Function Time Delay Relay ..................................... 1228 CD ................................. Discrete Function Time Delay Relay ..................................... 1222 CG ................................. Discrete Function Time Delay Relay ..................................... 1220 CH ................................. Discrete Function Time Delay Relay ..................................... 1226 CK ................................. Discrete Function Time Delay Relay ..................................... 1224 CL ................................. Discrete Function Time Delay Relay ..................................... 1231 CN1 .............................. Discrete Function Time Delay Relay ..................................... 1219 CNM5 ........................... Programmable Time Delay Relay ........................................... 1215 CNS .............................. Programmable Time Delay Relay ........................................... 1213 CNT .............................. Programmable Time Delay Relay ........................................... 1211 Contact Forms & Material .................................................................................................... iv CR ................................. Discrete Function Time Delay Relay ..................................... 1230 CS ................................. Voltage Sensor .......................................................................... 1302 CU ................................. Discrete Function Time Delay Relay ..................................... 1231 D2N (V23105 ) ............. DPDT, THT Low-signal PC Board Relay .................................. 333 FP2 ............................... DPDT, THT Low-signal PC Board Relay .................................. 323 FT2/FU2 ........................ DPDT, SMT or THT Low-signal PC Board Relay .................... 327 FX2 ............................... DPDT, THT Low-signal PC Board Relay .................................. 329 GP ................................. Control Relay ............................................................................... 917 High Performance Relay Product Overview ................................................................ 1401 IAC ............................... Standard AC Input Modules ................................................... 1110 IACM ............................ Slim Line AC Input Modules .................................................... 1118 IDC ............................... Standard DC Input Modules ................................................... 1110 IDCM ............................ Slim Line DC Input Modules .................................................... 1118 IF (V23077) ................... 16A, One-pole PC Board Relay ................................................. 489 IM ................................. DPDT, SMT or THT Low-signal PC Board Relay .................... 321 JWD/JWS ................... SPST-NO - DPDT, Dry Reed Relay .......................................... 303 K10 ............................... Relay w/Dust Cover .................................................................... 720 KA ................................. Open Relay ................................................................................... 737 KBP .............................. Mechanical Latching Relay ...................................................... 910 KH/KHA ....................... Relay w/Dust Cover .................................................................... 709 KHS .............................. Hermetically Sealed Relay ........................................................ 709 KRP-3-H ..................... Relay w/Dust Cover .................................................................... 739 KR-E ............................ Hermetically Sealed Relay ........................................................ 737 KRP/KRPA ................... Relay w/Dust Cover .................................................................... 737 KU/KUP ........................ Open Relay or Relay w/Dust Cover .......................................... 723 KUE/KUEP ................... Open Relay or Relay w/Dust Cover .......................................... 723 KUGP ........................... Relay w/Dust Cover .................................................................... 723 KUHP ........................... Power Relay ................................................................................ 803 KUIP ............................. Relay w/Dust Cover .................................................................... 723 KUL ............................... Magnetic Latching Relay .......................................................... 908 KUM/KUMP ................ Open Relay or Relay w/Dust Cover .......................................... 723 KUP93 .......................... Relay w/Dust Cover .................................................................... 731 MD0 ............................. Discrete Function Time Delay Relay ..................................... 1233 MDR ............................. Rotary Relay (High Shock Resistance) ................................... 914 Micro K (V23086) ........ Single or Dual 20A Automotive Relay .................................... 1002 ML ................................ Magnetic Latching Control Relay ............................................ 917 ii Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Series Type Page Model 2000 ................. Definite Purpose Contactor ...................................................... 828 Model 93-3100 ............ Definite Purpose Contactor ...................................................... 834 Model 96-3100 ............ Definite Purpose Contactor ...................................................... 830 Model 96-3186 ............ Definite Purpose Contactor ...................................................... 838 Model 98-3100 ............ Definite Purpose Contactor ...................................................... 832 Model A-3100 ............. Definite Purpose Contactor ...................................................... 840 MT ................................ Relay w/Dust Cover .................................................................... 742 MT2 .............................. DPDT, THT Low-signal PC Board Relay .................................. 335 MT4 .............................. 4PDT, THT Low-signal PC Board Relay ................................... 337 OAC .............................. Standard AC Output Module ................................................... 1110 OACM .......................... Slim Line AC Output Module ................................................... 1118 ODC .............................. Standard DC Output Module ................................................... 1110 ODCM .......................... Slim Line DC Output Module ................................................... 1118 OJ/OJE ........................ 3-10A, One-pole PC Board Relay ............................................. 422 OL ................................. SPST-NO & DPST-NO, Dry Reed Relay .................................. 304 OMI/OMIH .................. 16A, One-pole PC Board Relay ................................................. 458 OMI 2 ........................... 5A, Two-pole PC Board Relay .................................................. 460 OMIF ............................ 20A, One-pole PC Board Relay ................................................. 466 OMIT ............................ 10A, One-pole PC Board Relay ................................................. 464 OMR ............................. SPST-NO & DPST-NO, Dry Reed Relay .................................. 306 ORWH .......................... 10A, One-pole PC Board Relay ................................................. 438 OSA .............................. 3-5A, Two-pole PC Board Relay ............................................... 470 OSZ .............................. 16A, One-pole PC Board Relay ................................................. 472 OUAZ ........................... SPDT, THT Low-signal PC Board Relay .................................. 319 OUDH ........................... 10A, One-pole PC Board Relay ................................................. 432 OZ/OZF ......................... 16A, One-pole PC Board Relay ................................................. 462 P1 (V23026) ................. SPDT, SMT or THT Low-signal PC Board Relay .................... 314 P2 (V23079) ................. DPDT, SMT or THT Low-signal PC Board Relay .................... 325 P25 ............................... Definite Purpose Contactor ...................................................... 820 P30/P40 ........................ Definite Purpose Contactor ...................................................... 823 P31/P41 ........................ Definite Purpose Contactor ...................................................... 826 PB ................................. 10A, One-pole PC Board Relay ................................................. 426 PCD/PCDF ................... 15A, One-pole PC Board Relay ................................................. 424 PCE ............................... 10A, One-pole PC Board Relay ................................................. 436 PCF ............................... 25A DC Coil PCB Relay ................................................................ 502 PCG .............................. 5A, Two-pole PC Board Relay .................................................. 493 PCH .............................. 5-10A, One-pole PC Board Relay ............................................. 418 PCI ................................ 3A, Two-pole PC Board Relay .................................................. 468 PCJ ............................... 5A, One-pole PC Board Relay ................................................... 416 PCK .............................. 16A, One-pole PC Board Relay ................................................. 478 PCKWK ........................ Magnetic Latching Relay .......................................................... 904 PCL/PCLH .................... Relay w/Dust Cover .................................................................... 713 PCN .............................. 3A, One-pole PC Board Relay ................................................... 407 PE ................................. 5A, One-pole PC Board Relay ................................................... 403 PE - Latching .............. Magnetic Latching Relay .......................................................... 902 PM ................................ Power Relay ................................................................................ 809 PMA/PMB ................... Three Phase Power Quality Monitor ..................................... 1305 PRD .............................. Power Relay ................................................................................ 811 PT ................................. Relay w/Dust Cover .................................................................... 717 P&B Time Delay Relay Terms & Definitions ................................................................ 1202 P&B Time Delay Relay External Resistor Guide .......................................................... 1203 R10-R ........................... Immersion-Cleanable Relay ...................................................... 703 R10 ............................... Relay w/Dust Cover .................................................................... 703 RE ................................. 6A, One-pole PC Board Relay ................................................... 405 RM2/3/5/6/7 ................. Relay w/Dust Cover .................................................................... 733 RM C/D ........................ Power Relay ................................................................................ 805 RP II/1 .......................... 8-16A, One-pole PC Board Relay ............................................. 484 RP II/2 .......................... 8A, Two-pole PC Board Relay .................................................. 482 RP3SL (Hi-Inrush) ...... 16A, One-pole PC Board Relay ................................................. 486 RT - AC Coil ................ 8-16A, One- or two-pole PC Board Relay ............................... 448 RT - DC Coil ................ 8-16A, One- or two-pole PC Board Relay ............................... 446 RT - Sensitive ............ 10A, One-pole PC Board Relay ................................................. 451 RT - Hi-Inrush ............ 16A, One-pole PC Board Relay ................................................. 455 RT - Hi-Temp ............. 10-16A, One-pole PC Board Relay ........................................... 453 RT - Latching .............. Magnetic Latching Relay .......................................................... 906 RY II .............................. 8A, One-pole PC Board Relay ................................................... 412 S86R/S87R ................... Power Relay ................................................................................ 807 S89R/S90R ................... Impulse Relay .............................................................................. 912 SCB .............................. Discrete Function Time Delay Relay ..................................... 1235 SCE ............................... Discrete Function Time Delay Relay ..................................... 1239 SCF ............................... Programmable Time Delay Relay ........................................... 1218 SDAS-01 ...................... Current Monitor ........................................................................ 1307 SDT .............................. 10A, One-pole PC Board Relay ................................................. 474 SDT-R .......................... 5-10A, One-pole PC Board Relay ............................................. 476 Selector Guide ........................................................................................................................ v SNR (V23092) .............. 6A, One-pole PC Board Relay ................................................... 409 Socket Usage Guide .......................................................................................................... 749 SR2 (V23047) ............... 2 Pole Relay w/ Forcibly Guided Contacts .............................. 603 SR4 D/M ...................... 4 Pole Relay w/ Forcibly Guided Contacts .............................. 606 SR6 (V23050) ............... 6 Pole Relay w/ Forcibly Guided Contacts .............................. 609 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Series Type PRODUCT INDEX Page SR6D/M ....................... 4 Pole Relay w/ Forcibly Guided Contacts .............................. 607 SR6S ............................ Sensitive 6 Pole Relay w/ Forcibly Guided Contacts ............ 611 SR6Z ............................. 6 Pole Relay w/ Forcibly Guided ContactsModule ................ 613 SRC .............................. Discrete Function Time Delay Relay ..................................... 1237 SRUDH ......................... 12A, One-pole PC Board Relay ................................................. 442 SRUUH ......................... 15A, One-pole PC Board Relay ................................................. 444 SSC .............................. Discrete Function Time Delay Relay ..................................... 1234 SSF ............................... Programmable Time Delay Relay ........................................... 1217 SSR .............................. Solid State Relay, Paired SCR Output ................................... 1104 SSRD ............................ Dual Solid State Relay ............................................................. 1106 SSRQ ............................ Quad Solid State Relay ............................................................ 1108 SSRT ............................ Solid State Relay, Triac Output .............................................. 1102 SST ............................... Discrete Function Time Delay Relay ..................................... 1238 STA .............................. Discrete Function Time Delay Relay ..................................... 1236 T7C ............................... 5-12A, One-pole PC Board Relay ............................................. 440 T7N ............................... 10A, One-pole PC Board Relay ................................................. 434 T72M ............................ Single 20A Automotive Relay .................................................. 1005 T73 ................................ 10A, One-pole PC Board Relay ................................................. 430 T75 ................................ 8-14A, One-pole PC Board Relay ............................................. 414 T77 ................................ 3-10A, One-pole PC Board Relay ............................................. 420 T81 ................................ SPDT, THT Low-signal PC Board Relay .................................. 318 T9A ............................... 30A DC Coil PCB or Panel Mt. Relay ......................................... 506 T90 ................................ 30A DC Coil PCB Relay ................................................................ 504 T92 ................................ 30A AC or DC Coil PCB or Panel Mt. Relay .............................. 511 TR ................................. Timing Control Relay .................................................................. 917 Track Mount System .......................................................................................................... 747 TSC ............................... SPDT, THT Low-signal PC Board Relay .................................. 316 U/UB (V23148 ) ........... 7A, One-pole PC Board Relay ................................................... 428 V23026 (P1) ................. SPDT, SMT or THT Low-signal PC Board Relay .................... 314 V23047 (SR2) ............... 2 Pole Relay w/ Forcibly Guided Contacts .............................. 603 V23050 (SR6) ............... 6 Pole Relay w/ Forcibly Guided Contacts .............................. 609 V23057 (Card E) .......... 8A, One-pole PC Board Relay ................................................... 480 V23077 (IF) ................... 16A, One-pole PC Board Relay ................................................. 489 V23079 (P2) ................. DPDT, SMT or THT Low-signal PC Board Relay .................... 325 V23086 (Micro K) ........ Single or Dual 20A Automotive Relay .................................... 1002 V23092 (SNR) .............. 6A, One-pole PC Board Relay ................................................... 409 V23105 (D2N) .............. DPDT, THT Low-signal PC Board Relay .................................. 333 V23148 (U/UB) ............ 7A, One-pole PC Board Relay ................................................... 428 V2R ............................... 20A Automotive Motor Reversing Module ........................... 1012 VCA .............................. Single Phase Undervoltage Relay ......................................... 1303 VF4 ............................... 40A Automotive Relay .............................................................. 1017 VF7 ............................... 70A Automotive Relay .............................................................. 1021 VFM .............................. 20A Automotive Relay .............................................................. 1014 VKP .............................. 40A Automotive Relay .............................................................. 1007 VMA ............................. Single Phase Undervoltage Relay ......................................... 1304 VTF ............................... Automotive Flasher Module .................................................... 1024 VTM-1 .......................... Discrete Function Timing Module .......................................... 1240 VTM1 ........................... Discrete Function Timing Module .......................................... 1241 VTM2 ........................... Discrete Function Timing Module .......................................... 1244 VTM3 ........................... Discrete Function Timing Module .......................................... 1245 VTM4 ........................... Discrete Function Timing Module .......................................... 1246 VTM7 ........................... Discrete Function Timing Module .......................................... 1247 VTMA1 ......................... Discrete Function Timing Module .......................................... 1242 VTMR1 ......................... Discrete Function Timing Module .......................................... 1243 W6 ................................ Magnetic Circuit Breaker .......................................................... 119 W9 ................................ Magnetic Circuit Breaker .......................................................... 119 W23 .............................. Thermal Circuit Breaker ............................................................ 116 W28 .............................. Thermal Circuit Breaker ............................................................ 110 W31 .............................. Thermal Circuit Breaker ............................................................ 116 W33 .............................. Thermal Circuit Breaker ............................................................ 114 W51 .............................. Thermal Circuit Breaker ............................................................ 112 W54 .............................. Thermal Circuit Breaker ............................................................ 105 W57 .............................. Thermal Circuit Breaker ............................................................ 103 W58 .............................. Thermal Circuit Breaker ............................................................ 107 WD25 ........................... Paralleling (Synch Check) Relay ............................................ 1308 WD2759 ....................... Over/Undervoltage Relay ........................................................ 1308 WD32 ........................... Reverse Power Relay ............................................................... 1308 WD47 ........................... Phase Sequence Relay ............................................................ 1308 WD5051 ....................... 1 or 3-Phase Overcurrent Relay ............................................. 1308 WD81OU ...................... Over/Underfrequency Relay ................................................... 1308 Circuit Breakers .........................101-124 1 Transformers ..............................201-212 2 Low-signal PC Board Relays ....301-338 3 Mid-Range PC Board Relays ...401-498 4 Power PC Board Relays ............501-512 5 Relays with Forcibly-Guided Contacts .........601-614 6 Plug-in/Panel Mount General Purpose Relays ...........701-752 7 Power Relays & Definite Purpose Contactors ...................801-942 8 Latching, Impulse, Rotary & Special Application Relays ......901-920 9 Automotive Relays ................. 1001-1026 10 Solid State Relays & Input/Output Modules ...........1101-1126 11 Time Delay Relays & Modules...................................1201-1256 12 Sensors, Monitors & Protective Relays ................... 1301-1322 13 High Performance Relays & Contactors (overview) ...........1401-1412 14 Mature and Low Volume Products Some product series are not described in the databook, as they may not represent the most effective solution for many new design requirements. However, many of the non-cataloged products are still available for sale. Contact a Tyco Electronics Technical Specialist (see inside back cover) for more details about AGASTAT, AXICOM, CII, HARTMAN, KILOVAC, OEG, P&B, PRODUCTS UNLIMITED, SCHRACK or TYCO relay or circuit breaker products that you cannot find in this databook. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. iii Catalog 1308242 Issued 3-03 REFERENCE INFORMATION Contact Designators and Materials / Agency Approvals Contact Forms Design Sequence SPST-NO Make (1) SPST-NC Break (1) Symbol 1 Form Design Sequence A SPDT-NO Center OFF B SPST-NO (DM) Double Make (1) C SPST (DB) Double Break (1) D SPDT-NC-NO (DB-DM) Double Break (1) Double Make (2) E SPST-NO (DM) Double Make 1 SPDT Break(1) - Make (2) 2 1 SPDT Make (1) before Break (2) 2 SPDT (B-M-B) Break (1) - Make (2) before Break (3) 3 1 2 1 Symbol Form K 1 1 2 1 X Y Z U P&B Numbers for Contact Arrangements To simplify the listing of contact arrangements, P&B standard relays carry code numbers to designate the various contact forms listed in the following table. These numerals are used as abbreviations of the switching arrangements; for example: a PM17 relay has a 4PDT (four-pole-doublethrow) contact arrangement. Contact Code and NARM Designator 1 --1A SPST-NO 2 --1B SPST-NC 3 --1X SPST-NO-DM 4 --1Y SPST-NC-DB 5 --1C SPDT 6 --1Z SPDT-NC-NO (DM-DB) 7 --2A DPST-NO 8 --2B DPST-NC 9 --2X DPST-NO-DM 10 --2Y DPST-NC-DB 11 --2C DPDT 12 --3A 3PST-NO 13 --3B 3PST-NC 14 --3C 3PDT 15 --4A 4PST-NO 16 --4B 4PST-NC 17 --4C 4PDT 18 --5A 5PST-NO 19 --5B 5PST-NC 20 --5C 5PDT 21 --6A 6PST-NO 22 --6B 6PST-NC 23 --6C 6PDT 24 --7A 7PST-NO 25 --7B 7PST-NC 26 --7C 7PDT 27 --8A 8PST-NO 28 --8B 8PST-NC SP--Single Pole DP--Double Pole 3P--Three Pole 4P--Four Pole 29 --8C 8PDT 30 --9A 9PST-NO 31 --9B 9PST-NC 32 --9C 9PDT 33 --10A 10PST-NO 34 --10B 10PST-NC 35 --10C 10PDT 36 --11A 11PST-NO 37 --11B 11PST-NC 38 --11C 11PDT 39 --12A 12PST-NO 40 --12B 12PST-NC 41 --12C 12PDT 42 --3X 3PST-NO-DM 43 --2X + 1Y DPST-NO-DM + SPST-NC-DB 44 --2X DPST-NO-DM 45 --1X + 2Y SPST-NO-DM + DPST-NC-DB 46 --3Y 3PST-NC-DB 47 --4X 4PST-NO-DM 48 --2X + 2Y 2PST-NO-DM + 2PST-NC-DB 49 --4Y 4PST-NC-DB 50 --1A + 1B SPST-NO + SPST-NC 51 --1A + 1C SPST-NO + SPDT 52 --1B + 1C SPST-NC + SPDT 58 --1A + 2B SPST-NO + DPST-NC 59 --2A + 1B DPST-NO + SPST-NC 60 --2A + 2B DPST-NO + DPST-NC 61 --2A + 1C DPST-NO + SPDT SB--Single Break DB--Double Break 62 --1A + 2C SPST-NO + DPDT 63 --1B + 2C SPST-NC + DPDT 64 --2B + 1C DPST-NC + SPDT 65 --1A + 1B + 1C SPST-NO + SPST-NC + SPDT 67 --3A + 1B 3PST-NO + SPST-NC 68 --3A + 1C 3PST-NO + SPDT 69 --3B + 1C 3PST-NC + SPDT 70 --3A + 3B 3PST-NO + 3PST-NC 71 --2A + 2C DPST-NO + DPDT 72 --2B + 2C DPST-NC + DPDT 73 --1A + 3C SPST-NO + 3PDT 74 --3A + 2C 3PST-NO + DPDT 75 --1B + 3C SPST-NC + 3PDT 76 --1A + 3B SPST-NO + 3PST-NC 77 --1A + 1B + 2C SPST-NO + SPST-NC + DPDT 78 --1A + 2B + 1C SPST-NO + DPST-NC + SPDT 79 --2A + 1B + 1C DPST-NO + SPST-NC + SPDT 80 --2A + 6B DPST-NO + 6PST-NC 81 --4A + 4B 4PST-NO + 4PST-NC 82 --2A + 4C DPST-NO + 4PDT 83 --4A + 1B 4PST-NO + SPST-NC 84 --4A + 2B 4PST-NO-DPST-NC 85 --3A + 2B 3PST-NO-DPST-NC ST--Single Throw DT--Double Throw DM--Double Make NO--Normally Open NC--Normally Closed CO stands for changeover, a term sometimes used for a double throw configuration. Common Contact Material Abbreviations Used in this Databook Ag is silver. AgCdO is silver-cadmium oxide. AgNi 0.15 is fine grain silver. AgNi or AgNi 20 is silver-nickel alloy. AgPd is silver-palladium alloy. AgSn is silver-tin alloy. AgSnO is silver-tin oxide. Au is gold. AuAgNi is gold-silver-nickel alloy. AuPtAg is gold-platinum-silver alloy. AuRh is gold-rhodium alloy. Hg is mercury. PdCu is palladium-copper alloy. PdNi is palladium-nickel alloy. Rh is rhodium. Ru is ruthenium. W is tungsten. Logos of Various Approval Agencies/Laboratories Used in this Databook iv - UL Recognized for USA. - CSA Certification. - TUV Approved. - Factory Mutual Approved. - UL Recognized for Canada. - CSA Component Acceptance. - Demko Approved. - Kema-Keur Certification. - UL Recognized for USA & Canada. - VDE Approved - CECC Approved. - UL Listed. - VDE Component Mark - SEV Approved. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. .. TUV Rheinland Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Circuit Breakers P&B P&B P&B P&B P&B Series W57 W54 W58 W28 W51 Type Thermal Thermal Thermal Thermal Thermal Features Approximate Size and Weight (per pole) * Compact design * Quick connect terminals * Button extends for visible trip indication * Push-to-reset operation * Optional protective boot * Quick connect or screw terminals * Button extends for visible trip indication * Push-to-reset operation * Optional protective boot * Quick connect or screw terminals * Button extends for visible trip indication * Push-to-reset operation * Replaces slow blow glass cartridge fuse and holder * Snap-in mounting * Button provides visible trip indication * Push-to-reset or switchable version * Rocker actuated breaker/ switch * Convenient, snap-in mounting * Optional indicator light * Quick connect terminals * Push-to-reset operation .575" x 1.15" x .889"d (14.6 x 29.2 x 22.6d) .5 oz. (14.3g) .575" x 1.378" x 1.22"d (14.6 x 35.0 x 31.0d) .9 oz. (25g) .66" x 1.38" x 1.38"d (16.8 x 34.9 x 34.9d) 1.5 oz. (43g) .54" x .63" x 1.54"d (13.7 x 15.9 x 39.0d) .35 oz. (10g) .598" x 1.311" x 1.232"d (15.2 x 33.3 x 31.3d) .37 oz. (10.5g) 1 1 1 1 1 Circuit Function Series Trip Series Trip Series Trip Series Trip Series Trip Current Rating 4-20 Amps 5-40 Amps 1-30 Amps 0.5-20 Amps 5-20 Amps Max. Operating Voltage 50VDC 250VAC 50VDC 250VAC 50VDC 250VAC 32VDC 250VAC 50VDC 125 or 250VAC (model dependent) Trip Time at 200% of Rating 4 to 40 Sec. 5 to 30 Sec. 1-4A Models - 10 to 45 Sec. 5-30A Models - 6 to 30 Sec. 0.5-2A Models - 4.5 to 28 Sec. 3-15A Models - 2.2 to 15 Sec. Interrupt Capacity 1,000A 1,000A 2,000A @ 50VDC 1,000A @ 250VAC 1,000A @ 32VDC or 250VAC 1,000A Terminal Options .250" (6.35) Quick Connect .250" (6.35) Quick Connect, #8-32 Screw .250" (6.35) Quick Connect, #6-32 Screw .250" (6.35) Quick Connect (Do not solder) .250" (6.35) Quick Connect or PC terminals 7/16"-28 Threaded Bushing, 15/32"-32 Threaded Bushing Snaps into 5/8" (15.9) panel cutout from the front Snaps into .531 x 1.122" (13.5 x 28.5) panel cutout from the front 107 110 112 No. of Poles Mounting Options Page Number 3/8"-24 Threaded Bushing, 3/8"-24 Threaded Bushing, M11-1.0 Threaded Bushing or M11-1.0 Threaded Bushing or M12-1.0 Threaded Bushing M12-1.0 Threaded Bushing 103 105 4 to 40 Sec. Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. v Catalog 1308242 Issued 3-03 SELECTOR GUIDE Circuit Breakers P&B P&B P&B Series W33 W23 W31 W6 W9 Type Thermal Thermal Thermal Magnetic Magnetic * Toggle actuation for manual on/off and reset * Compact design * Variety of time delay options * Toggle actuation for manual on/off and reset * Optional aux. switch Features Approximate Size and Weight (per pole) * Rocker actuator in various colors * Convenient, snap-in mounting * Optional lighted rockers * Models with aux. switch available * Designed to meet IEC and VDE requirements * Push/pull actuation for manual on/off and reset P&B P&B * Variety of time delay options * Toggle actuation for manual on/off and reset * Optional aux. switch .98" x 1.89" x 1.72"d (24.9 x 48.0 x 43.8d) 1.2 oz. (35g) .69" x 1.38" x 1.6"d (17.5 x 34.9 x 40.6d) 2 oz. (57g) .69" x 1.38" x 1.6"d (17.5 x 34.9 x 40.6d) 2 oz. (57g) .75" x 2.0" x 1.64"d (19.1 x 50.8 x 42.1d) 2.5 oz. (71g) .75" x 2.5" x 2.1"d (19.1 x 63.5 x 53.0d) 2.5 oz. (71g) 1 or 2 1 1 1 through 4 1 through 4 Circuit Function Series Trip, both poles or Series Trip, one pole; Switch only, one pole Series Trip Series Trip Series Trip w/ or w/o Aux. Switch Series Trip w/ or w/o Aux. Switch Current Rating 5-20 Amps 1-50 Amps 1-50 Amps .25-50 Amps .25-50 Amps Max. Operating Voltage 50VDC 250VAC 50VDC 250VAC 50VDC 250VAC 65VDC 277VAC 480VAC 3O-Wye 65VDC 277VAC 480VAC 3O-Wye Trip Time at 200% of Rating 10 to 45 Sec. 1-3A Models - 11 to 30 Sec. 5-50A Models - 6 to 22 Sec. 1-3A Models - 11 to 30 Sec. 5-50A Models - 6 to 22 Sec. 30ms to 150 Sec. depending upon trip curve specified. 30ms to 150 Sec. depending upon trip curve specified. Interrupt Capacity 1,000A @ 50VDC 2,000A @ 250VAC 1-25A Models - 2,000A @ 50VDC 1,000A @ 250VAC 30-50A Models - 1,000A @ 50VDC or 250VAC 1-25A Models - 2,000A @ 50VDC 1,000A @ 250VAC 30-50A Models - 1,000A @ 50VDC or 250VAC 0.25-20A Models - 2,000A @ 65VDC 5,000A @ 277VAC or 480VAC, 3O-Wye 21-50A Models - 2,000A @ 65VDC 2,500A @ 277VAC 2,000A @ 65VDC 5,000A @ 277VAC or 480VAC, 3O-Wye Terminal Options .250" (6.35) Quick Connect, Solder #8-32 Screw #8-32 Screw .250" (6.35) Quick Connect, #10-32 Screw #10-32 Stud Mounting Options Snaps into .875 x 1.75" (22.2 x 44.5) panel cutout from the front 3/8"-24 Threaded Bushing 15/32"-32 Threaded Bushing #6-32 Tapped Holes, M3 Tapped Holes #6-32 Tapped Holes, M3 Tapped Holes 114 116 116 119 119 No. of Poles Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. vi Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Transformers PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED 4000 4000 4000 4000 4000 Class II UL1585 Transformer Class II UL1585 Transformer Class II UL1585 Transformer Class II UL1585 Transformer Class II UL1585 Transformer Inherently Energy Limited Inherently Energy Limited Inherently Energy Limited Inherently Energy Limited Inherently Energy Limited 5, 10, 20 & 30VA 10, 20 & 30VA 20 & 40VA 40 & 50VA 40 & 50VA Terminal Options Wire Leads Quick Connect Wire Leads & Screws WIre Leads Quick Connect Mounting Options Foot or Panel Foot or Panel Plate Foot or Panel Foot or Panel 204 205 206 207 208 Series Type VA Rating Agency Approval Page Number Transformers Series Type PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED 4000 4000 4700 4700 57 Class II UL1585 Transformer Class II UL1585 Transformer UL506 Transformer UL506 Transformer Transformer Relay Non-Fused Non-Fused Inherently Energy Limited Non-Inherently Energy Limited Non-Inherently Energy Limited Secondary Fusing Required (Opt. integral fuse or breaker) Secondary Fusing Required (Opt. integral fuse or breaker) VA Rating 60 & 75VA 60 & 75VA 60, 100 & 150VA 60, 100 & 150VA 40VA Terminal Options Wire Leads Quick Connect Wire Leads Quick Connect Wire Leads and Screws (optional Quick Connects) Mounting Options Foot or Panel Foot or Panel Foot Foot Plate 209 210 211 211 212 9100 or 9400 Series Relay Agency Approval Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. vii Catalog 1308242 Issued 3-03 SELECTOR GUIDE Low-Signal Printed Circuit Board Relays Series Features * * * * * P&B P&B OEG OEG P&B AXICOM OEG JWS JWD OL OMR 159/160 V23026 TSC 10W rating Dry reed relay SIP configuration Molded package Wave solderable and immersion cleanable * * * * * 10W rating Dry reed relay DIP configuration Molded package Wave solderable and immersion cleanable * * * * 10W rating Dry reed relay Plastic dust cover Consult factory for wave solderable and immersion cleanable model * 10W rating * Dry reed relay * Open or with plastic dust cover * 10W rating * Hg wetted reed relay * Fast operating speed * No contact bounce * Single, dual and bifilar coils * Single-side stable or bistable contacts * * * * 1A rating Miniature relay Sealed case Through-hole or surface mount * Low coil power requirement * Latching or nonlatching * 1A rating * Miniature relay * Meets FCC Part 68 isolation * Sealed, immerssion cleanable case * Sensitive coil Approximate Dimensions .80" x .26" x .31"h (20.3 x 6.6 x 7.8h) 0.08 oz. (2g) .77" x .30" x .32"h (19.6 x 7.62 x 8.0h) 0.08 oz. (2g) .795" x .31" x .26"h (20.2 x 7.9 x 6.6h) 0.07 oz. (2g) .8" x .32" x .35"h (20.3 x 8.0 x 9.0h) 0.16 oz. (4.5g) .4" x .535" x 1.56"h (10.2 x 13.6 x 39.6h) 1 oz. (28g) .51" x .31" x .27"h (13 x 7.9 x 6.9h) 0.06 oz. (1.7g) .49" x .29" x .39"h (12.5 x 7.5 x 10.0h) 0.1 oz. (3g) Contact Arrangements 1 Form A 1 Form A, 1 Form B 1 Form C, 2 Form A 1 Form A, 2 Form A 1 Form A, 2 Form A 1 Form C, 1 Form D 1 Form C 1 Form C Ru Ru Rh & Ru Rh & Ru Hg RhAu overlay PdNi Au overlay AgNi 10W 10W Form A & B 3W Form C 10W 10W 2A 1A, AC or DC 125VAC, 150VDC 60VA, 30W resistive 1A, AC or DC 30VDC, 120VAC 24W or 120VA resistive Expected Mechanical Life 1 x 108 Ops. 1 x 108 Ops. 1 x 108 Ops. 1 x 108 Ops. 1 x 109 Ops. 1 x 108 Ops. 5 x 107 Ops. Expected Electrical Life at Rated Load 1 x 106 Ops. 1 x 106 Ops. 1 x 106 Ops. 1 x 106 Ops. 1 x 109 Ops. 2.5 x 105 @ 0.4A, 125VAC 3 x 106 @ 1A, 24VDC 1 x 105 Nominal Coil Voltage 5-24VDC 5-24VDC 6-24VDC 5-24VDC 2.2-9,000 ohms 5-24VDC 5-24VDC Nominal Coil Power 50-272mW 50-288mW 100-270mW 100-280mW 20-115mW 67-128mW 150mW Mounting Options PC board PC board PC board PC board PC board PC board (THT and SMT) PC board -- Fits 14-pin IC socket -- -- -- -- -- 303 303 304 306 308 314 316 Contact Material Maximum Contact Rating Sockets / Connectors Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. viii Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Low-Signal Printed Circuit Board Relays P&B OEG AXICOM AXICOM AXICOM AXICOM AXICOM T81 OUAZ IM FP2 V23079 FT2/FU2 FX2 Features * 0.5 - 1A rating * Miniature, high density package * Tape sealed, immersion cleanable case * Sensitive coil option * Meets FCC Part 68 isolation * 0.5 - 1A rating * Miniature, high density package * Tape sealed, immersion cleanable case * Sensitive coil option * Meets FCC Part 68 isolation * * * * 2A rating Ultraminiature relay High sensitivity coil High mechanical shock resistance * Low coil power requirement * * * * 2A rating Low profile relay High sensitivity coil High mechanical shock resistance * Latching and nonlatching versions * Sealed immersion cleanable case * * * * 2A rating Vertical mount High dielectric Latching and nonlatching versions * Meets FCC Part 68 insulation * Sealed immersion cleanable case * 2A rating * Vertical mount * High dielectric version * Meets FCC Part 68 insulation * Sealed immersion cleanable case * 2A rating * Vertical mount * Latching and nonlatching versions * Meets FCC Part 68 insulation * Sealed immersion cleanable case Approximate Dimensions .61" x .45" x .43"h (15.4 x 11.4 x 11.0h) 0.14 oz. (4g) .61" x .45" x .43"h (15.4 x 11.4 x 11.0h) 0.14 oz. (4g) .393" x .236" x .222"h (10 x 6 x 5.65h) 0.03 oz. (.75g) .574" x .35" x .196"h (14.02 x 9.02 x 5.0h) 0.08 oz. (2g) .574" x .283" x .389"h .590" x .295" x .377"h .587" x .283" x .421"h (14.6 x 7.2 x 9.9h) (15.0 x 7.5 x 9.6h) (14.9 x 7.3 x 10.7h) 0.084 oz. (2.5g) 0.12 oz. (3g) 0.1 oz. (2.5g) Contact Arrangements 1 Form C 1 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C Contact Material Au overlay AgPd Au overlay AgPd Au overlay PdRu Au overlay AgNi Au overlay AgNi Au overlay AgNi PdRu 1A @ 24VDC or 0.5A @ 120VAC, resistive 1A @ 24VDC or 120VAC, resistive 2A, AC or DC 250VAC, 220VDC 60W or 62.5VA, resistive 2A, AC or DC 125VDC, 250VAC 30W or 62.5VA, resistive 2A, AC or DC 220VDC, 250VAC 60W or 60VA, resistive 2A, AC or DC 125VDC, 250VAC 30W or 62.5VA, resistive 2A, AC or DC 220VDC, 250VAC 60W or 62.5VA, resistive 5 x 106 Ops. 5 x 106 Ops. 1 x 108 Ops. 1 x 108 Ops. 1 x 108 Ops. 1 x 108 Ops. 1 x 108 Ops. Expected Electrical Life at Rated Load 1.5 x 105 @ 1A, 24VDC 1 x 105 @ 0.5A, 120VAC 1 x 105 @ 1A 5 x 105 @ 1A, 30VDC 1 x 105 @ 2A, 30VDC 3 x 105 @ 1.25A, 24VDC 2 x 105 @ 2A, 30VDC 1 x 105 @ 1.25A, 24VDC 5 x 105 @ 2A, 30VDC Nominal Coil Voltage 3-24VDC 5-24VDC 1.5-24VDC 3-48VDC 3-48VDC 3-48VDC 3-48VDC Nominal Coil Power (standard) 450mW (sensitive) 200mW (standard) 450mW (sensitive) 200mW 100-200mW 80-200mW 70-140mW 200-300mW 80-300mW Mounting Options PC board, Socket PC board, Socket PC board (THT and SMT) PC board (THT) PC board (THT and SMT) PC board (THT and SMT) PC board (THT) Fits 12-pin IC socket Fits 12-pin IC socket -- -- -- -- -- 318 319 321 323 325 327 329 Series Maximum Contact Rating Expected Mechanical Life Sockets / Connectors Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. ix Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range PC Board Relays Low-Signal PC Board Relays Series P&B AXICOM AXICOM AXICOM SCHRACK SCHRACK OEG 190 V23105 MT2 MT4 PE RE PCN 3A rating Mini DIP relay High sensitivity coil Sealed immersion cleanable case * Meets FCC Part 68 insulation 6A rating Sensitive coil DIP cofiguration 4kV coil-to-contact isolation * Immersion cleanable case with knock-off nib * VDE 0110 * 3A rating * Ultra slim .197" (5mm) package * Sensitive coil * 3kV coil-to-contact isolation * Immersion cleanable case Features * 2A rating * Mini DIP relay * Various coil sensitivity options * Sealed immersion cleanable case * Meets FCC Part 68 insulation * 1.25A rating * Miniature, telecom relay * Meets FCC Part 68 isolation * Sealed, immersion cleanable case * 1.25A rating * Miniature, telecom relay * Meets FCC Part 68 isolation * Sealed, immersion cleanable case * 5A rating * Sensitive coil * Flux-tight case for wave soldering * Class F coil Approximate Dimensions .807" x .398" x .453"h .795" x .394" x .45"h .795" x .393" x .433"h (20.5 x 10.1 x 11.5h) (20.2 x 10.0 x 11.43h) (20.2 x 10.0 x 11.0h) 0.21 oz. (6g) 0.2 oz. (6g) 0.18 oz. (5g) .795" x .582" x .433"h (20.2 x 14.8 x 11.0h) 0.25 oz. (7g) .79" x .39" x .39"h (20 x 10 x 10h) 0.18 oz. (5g) .79" x .39" x .42"h (20 x 10 x 10.6h) 0.18 oz. (5g) .79" x .197" x .492"h (20 x 5 x 12.5h) 0.1 oz. (3g) * * * * * * * * 2 Form C 2 Form C 2 Form C 4 Form C 1 Form C 1 Form A 1 Form A Au overlay Ag Au overlay AgNi Au overlay AgNi Au overlay AgNi AgNi 90/10 AgCdO or Au overlay AgNi AgNi 2A, AC or DC 125VDC, 125VAC 60W or 62.5VA, resistive 3A, AC or DC 250VDC, 230VAC 60W or 120VA, resistive 1.25A, AC or DC 150VAC or VDC 30W or 62.5VA, resistive 1.25A, AC or DC 150VAC or VDC 30W or 62.5VA, resistive 5A @ 250VAC 6A @ 250VAC 3A @ 250VAC Expected Mechanical Life 15 x 106 Ops. 15 x 106 Ops. 1 x 108 Ops. 1 x 108 Ops. 15 x 106 Ops. 3 x 107 Ops. 2 x 107 Ops. Expected Electrical Life at Rated Load 1 x 105 @ 1.8A, 30VDC 1 x 105 @ 2A, 30VDC 2 x 105 @ 1.25A, 24VDC 2 x 105 @ 1.25A, 24VDC 1 x 105 5 x 105 1 x 105 Nominal Coil Voltage 3-48VDC 3-48VDC 4.5-48VDC 4.5-48VDC 5-48VDC 5-48VDC 5-24VDC Nominal Coil Power 150-500mW 150-500mW 150-550mW 300mW 200mW 200mW 120mW Mounting Options PC board PC board PC board PC board PC board PC board PC board Sockets / Connectors Fits 16-pin IC Socket Fits 16-pin IC Socket Fits 16-pin IC Socket -- -- -- -- 331 333 335 337 403 405 407 Contact Arrangements Contact Material Maximum Contact Rating Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. x Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays SCHRACK SCHRACK P&B OEG OEG P&B OEG V23092 (SNR) RY II T75 PCJ PCH T77 OJ/OJE * 6A rating * Ultra slim .197" (5mm) package * Low coil power requirement * Immersion cleanable case * DIN mount module available * 8A rating * Meets international specifications * Sensitive coil * Low profile design * Flux-tight or washable case * 8 - 14A rating * Meets international specifications * Sensitive coil * Low profile design * Immersion cleanable case * 5A rating * Slim profile for high density mount * 200mW coil * 4,000Vrms coil-tocontact breakdown * UL508 * 5-10A rating * Small size relay * 1 Form C contact arrangement * 4,000 Vrms coil-tocontact breakdown * UL873 * UL Class F coil available * 3 - 10A rating * Small size * 4,000 Vrms coil-tocontact breakdown * Sealed or flux tight case * Class F coil insulation * 3 - 10A rating * Small size * 4,000 Vrms coil-tocontact breakdown * Sealed or flux tight case * Sensitive models available Approximate Dimensions .20" x 1.1" x .59"h (5 x 28 x 15h) 0.21 oz. (6g) 1.12" x .40" x .48"h (28.5 x 10.1 x 12.3h) 0.28 oz. (8g) 1.12" x .39" x .59"h (28.5 x 10 x 15h) 0.65 oz. (18.5g) .80 x .28 x .59h (20.4 x 7 x 15h) .14 oz (4g) .78 x .39 x.60 (19.8 x 9.9 x 15.2h) .25 oz (7g) .72" x .39" x .57"h (18.2 x 10.0 x 14.7h) 0.36 oz. (9g) .72" x .39" x .57"h (18.2 x 10.0 x 14.7h) 0.36 oz. (9g) Contact Arrangements 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A 1 Form C 1 Form A 1 Form A AgSnO, Au plated AgSnO, AgNi 90/10 AgCdO, AgNi 0.15, au plated AgNi0.15, AgSnO AgCdO AgNi AgSnO Ag Ag Alloy Ag Ag Alloy 6A, 25VAC 8A @ 250VAC 14A @ 120VAC, resistive 10A @ 240 VAC 8A @ 24VDC 5A @ 250VAC or 28VDC resistive 10A @ 125VAC (NO) 5A @ 277VAC or 30VDC (NO) 3A @ 277VAC or 30VDC (NC) resistive 3A @ 28VDC or 250VAC 10A @ 28VDC or 120VAC 3A @ 28VDC or 250VAC 5A @ 28VDC or 250VAC 10A @ 28VDC or 120VAC 2 x 107 Ops. 3 x 107 Ops. 2 x 107 Ops. 5 x 106 Ops. 5 x 106 Ops. 1 x 107 Ops. 1 x 107 Ops. Expected Electrical Life at Rated Load 5 x 104 1 x 105 5 x 104 1 x 105 1 x 105 1 x 105 1 x 105 Nominal Coil Voltage 12-24VDC 5-48VDC 3-60VDC 5-24VDC 5-48VDC 3-24VDC 5-48VDC Nominal Coil Power 210mW 220mW 230mW 200mW 200-400mW 200-450mW 200-450mW Mounting Options PC board PC board PC board PC board PC board PC board PC board Sockets / Connectors -- -- -- -- -- -- -- Page Number 409 412 414 416 418 420 422 Series Features Contact Material Maximum Contact Rating Expected Mechanical Life Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xi Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays Series OEG SCHRACK SCHRACK P&B OEG P&B OEG PCD/PCDF PB V23148 (U/UB) T73 OUDH T7N PCE Features * * * * 10-15A rating Low-profile relay Sensitive coil Sealed or flux tight case * Available with quick connect terminals for load * 10A rating * Miniature relay * Low complexity design * Flux tight case * Available Class F coil insulation * 7A rating * Standard or latching type * Sensitive version available * 2kV or 4kV dieleectric options * Sealed case * * * * * 10A rating Low-profile relay Sealed case UL508 Class F coil insulation standard * 10A rating * Low-profile relay * Flux tight or sealed case * Class A coil insulation standard * 10A rating * Low-profile relay * UL Class F coil standard * Immersion cleanable sealed case * 10A rating * Low-profile relay * UL Class F coil standard * Immersion cleanable sealed case Approximate Dimensions .90" x .63" x .40"h (23.0 x 16.1 x 10.2h) 0.35 oz. (10g) .59" x .59" x .79"h (15.0 x 15.0 x 20.0h) 0.2 oz. (5.4g) .64" x .84" x .59"h (16.2 x 21.2 x 14.9h) 0.34 oz. (9.5g) .88" x .69" x .61"h (22.3 x 17.6 x 15.5h) 0.42 oz. (12g) .88" x .69" x .61"h (22.3 x 17.6 x 15.5h) 0.42 oz. (12g) .87" x .63" x .65"h (22.0 x 16.0 x 16.4h) 0.38 oz. (11g) .87" x .63" x .65"h (22.0 x 16.0 x 16.4h) 0.38 oz. (11g) Contact Arrangements 1 Form A 1 Form A 1 Form A, 1 Form B, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C AgSnO AgNi 90/10 AgNi 0.15 AgCdO Ag Alloy AgCdO AgCdO, AgSnO 15A @ 125VAC (QC version only) 10A @ 28VDC or 250VAC resistive 10A @ 240VAC (NO) 3A @ 240VAC (NC) 7A @ 250VAC or 24VDC resistive 10A @ 120VAC 6A @ 24VDC 10A @ 120VAC 6A @ 24VDC 10A @ 240VAC or 28VDC 10A @ 250VAC or 28VDC 1 x 107 Ops. 5 x 106 Ops. 2 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. Expected Electrical Life at Rated Load 1 x 105 1 x 105 at 6A, 240VAC (NO) 2.5 x 104 at 10A, 240VAC (NO) 5 x 104 at 7A (NO) 1 x 105 1 x 105 1 x 105 Ops. 1 x 105 Ops. Nominal Coil Voltage 5-48VDC 6-24VDC 6-48VDC 3-48VDC 5-48VDC 3-48VDC 6-48VDC Nominal Coil Power 200-250mW 360mW 330-800mW 450-660mW 450-660mW 360mW 360mW Mounting Options PC board PC board PC board PC board PC board PC board, Socket PC board, Socket Sockets / Connectors -- -- -- -- -- PC terminals (10A rated) PC terminals (10A rated) Page Number 424 426 428 430 432 434 436 Contact Material Maximum Contact Rating Expected Mechanical Life Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xii Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays OEG P&B OEG OEG P&B/SCHRACK SCHRACK SCHRACK ORWH T7C SRUDH SRUUH RT (DC) RT (AC) RT (Sens.) Features * 10A rating * Low-profile relay * Flux-tight or sealed case * 5-12A rating * Compact design * 1,500 Vrms coil-tocontact breakdown * Immersion cleanable or fluxtight case * UL Class F coil standard * 12A rating * Compact design * 1,500 Vrms coil-tocontact breakdown * Immersion cleanable or fluxtight case * 15A rating * Compact design * 1,500 Vrms coil-tocontact breakdown * Immersion cleanable or fluxtight case * 8-16A rating * Immersion cleanable or fluxtight case * Low profile case * 10mm coil-tocontact spacing for 5kV isolation * 8-16A rating * Immersion cleanable or fluxtight case * Low profile case * 10mm coil-tocontact spacing for 5kV isolation * 10A rating * Sensitive coil * Immersion cleanable or fluxtight case * Low profile case * 10mm coil-tocontact spacing for 5kV isolation Approximate Dimensions .75" x .61" x .6"h (20.3 x 16.5 x 20.6h) 0.33 oz. (9.5g) .80" x .65" x .81"h (20.3 x 16.5 x 20.6h) 0.42 oz. (12g) .80" x .65" x .81"h (20.3 x 16.5 x 20.6h) 0.42 oz. (12g) .80" x .65" x .81"h (20.3 x 16.5 x 20.6h) 0.42 oz. (12g) 1.14" x .50" x .62"h (29 x 12.7 x 15.7h) 0.42 oz. (12g) 1.14" x .50" x .62"h (29 x 12.7 x 15.7h) 0.42 oz. (12g) 1.14" x .50" x .62"h (29 x 12.7 x 15.7h) 0.42 oz. (12g) Contact Arrangements 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 2 Form A, 1 Form C, 2 Form C 1 Form A, 2 Form A, 1 Form C, 2 Form C 1 Form A, 1 Form C AgCdO AgCdO, Ag AgCdO AgCdO AgNi 90/10 AgNi 90/10 AgNi 90/10 10A @ 277VAC or 28VDC (NO) 15A @ 120VAC (NO) 10A/6A @ 250VAC or 28VDC (NO/NC) 10A @ 240VAC or 28VDC 12A @ 120VAC 10A @ 240VAC or 28VDC 12A @ 120VAC 10A @ 240VAC or 28VDC 15A @ 120VAC 16A, AC or DC 250VAC, 30VDC (16A version) 16A, AC or DC 250VAC, 30VDC (16A version) 10A, AC 250VAC 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. Expected Electrical Life at Rated Load 1 x 105 Ops. at 10A @ 250VAC (NO) 1 x 105 Ops. 1 x 105 Ops. 1 x 105 Ops. 5 x 104 (16A version) 5 x 104 (16A version) 1.5 x 105 Nominal Coil Voltage 3-48VDC 3-48VDC 6-48VDC 3-48VDC 5-110VDC 24-230VAC 5-60VDC Nominal Coil Power 360mW 360mW 360mW 360-510mW 400mW .75VA 250mW Mounting Options PC board, Socket PC board, Socket PC board, Socket PC board, Socket PC board, Socket PC board, Socket PC board, Socket PC terminals (10A rated) PC terminals (10A rated) PC terminals (10A rated) PC terminals (10A rated) Screw terminals, PC terminals Screw terminals, PC terminals Screw terminals, PC terminals 438 440 442 442 446 448 451 Series Contact Material Maximum Contact Rating Expected Mechanical Life Sockets / Connectors Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xiii Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays SCHRACK SCHRACK SCHRACK OEG OEG OEG OEG OZ/OZF OMIT Series RTH (Hi-temp) RT (Hi-inrush) Features * 10-16A rating * High-temp version for up to 105C * Immersion cleanable or fluxtight case * Low profile case * 10mm coil-tocontact spacing for 5kV isolation * 16A rating * Handles inrush currents to 80A * Immersion cleanable or fluxtight case * Low profile case * 10mm coil-tocontact spacing for 5kV isolation * 16A rating * Handles inrush currents to 80A * Flux-tight case * Low profile case * 8mm coil-to-contact spacing for 4kV isolation * 10-16A rating * 5A rating * 20A rating * 5,000 Vrms coil-to- * 5,000 Vrms coil-to- * 5,000 Vrms coil-tocontact breakdown contact breakdown contact breakdown * Sealed or flux-tight * Sealed or flux-tight * Flux-tight or sealed case case case * 16A type available * TV-8 rating available (OMIH) (OZT) * Quick connect terminal available for load (OZF) Approximate Dimensions 1.14" x .50" x .62"h (29 x 12.7 x 15.7h) 0.42 oz. (12g) 1.14" x .50" x .62"h (29 x 12.7 x 15.7h) 0.42 oz. (12g) 1.12" x .49" x .59"h (28.5 x 12.5 x 15.0h) 0.35 oz. (10g) 1.15 x .50 x .81h (29.2 x 12.8 x 20.6h) .46 oz (13g) 1.15 x .50 x .81h (29.2 x 12.8 x 20.6h) .46 oz (13g) 1.15 x .50 x .81h (29.2 x 12.8 x 20.6h) .46 oz (13g) 1.15 x .50 x .81h (29.2 x 12.8 x 20.6h) .46 oz (13g) Contact Arrangements 1 Form A, 1 Form C, 1 Form A 1 Form A 1 Form A, 1 Form C 2 Form A, 2 Form C 1 Form A, 1 Form C 1 Form A, 1 Form C Contact Material AgNi 90/10 AgNi 90/10, AgSnO AgSnO with W prerun Ag Alloy (OMI) AgSnO (OMIH) Ag Alloy Ag Alloy AgSnO AgSnO 16A, AC 250VAC (standard coil version) 10A, AC 250VAC (sensitive coil version) 16A, AC 250VAC 80A for 20ms 10A, AC 250VAC 80A for 20ms 10A @ 240VAC or 24VDC (OMI) 5A @ 240VAC or 24VDC 20A @ 120VAC, 16A @ 240VAC, TV-8 @ 120VAC 10A @ 240VAC, TV-5 @ 120VAC, 10A @ 30VDC 1 x 107 Ops. 3 x 107 Ops. 5 x 106 Ops. 1 x 107 1 x 107 1 x 107 1 x 107 Expected Electrical Life at Rated Load 2.5 x 105 (Hi-performance contact) 1 x 105 5 x 104 1 x 105 1 x 105 1 x 105 1 x 105 Nominal Coil Voltage 9-24VDC 12-60VDC 6-60VDC 5-48VDC 3-48VDC 5-48VDC 5-48VDC Nominal Coil Power 400mW (standard) 250mW (sensitive) 400mW 480mW 540mW (Sensitive) 720mW (Standard) 540mW (Sensitive) 720mW (Standard) 540mW (Sensitive) 720mW (Standard) 540mW (Sensitive) 720mW (Standard) Mounting Options PC board, Socket PC board, Socket PC board, Socket PC board, Socket PC board, Socket PC board, Quick connect (for load), Socket PC board, Socket Screw terminals, PC terminals Screw terminals, PC terminals Screw terminals, PC terminals Screw terminals, PC terminals Screw terminals, PC terminals Screw terminals, PC terminals Screw terminals, PC terminals 453 455 455 458 460 462 464 Maximum Contact Rating Expected Mechanical Life Sockets / Connectors Page Number 0429 OMI/OMIH OMI 2 pole * 10A rating * 5,000 Vrms coil-tocontact breakdown * Flux-tight or sealed case * TV-5 rating 16A @ 240VAC or 24VDC (OMIH) Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xiv Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays OEG OEG OEG OEG OEG OEG OEG OMIF PCI OSA OSZ SDT SDT-R PCK Features * 20A rating * Flux-tight case * 5,000 Vrms coil-tocontact breakdown * Quick connect terminals for load * 3A rating * Slim design * Sealed or fluxtight case * Magnetic blowout option for DC loads * Handles audio speaker loads * * * * Approximate Dimensions 1.14" x .50" x .96"h (29.2 x 12.8 x 24.5h) 0.53 oz. (15g) .945" x .394" x .984"h (24 x 10 x 25h) 0.41 oz. (10.5g) .96" x .508" x .976"h (24.4 x 12.9 x 24.8h) 0.46 oz. (13g) .96" x .508" x .976"h (24.4 x 12.9 x 24.8h) 0.46 oz. (13g) .96" x .409" x .984"h (24.4 x 10.4 x 25h) 0.39 oz. (11g) .945" x .394" x .984"h (24 x 10.4 x 25h) 0.39 oz. (11g) .866 x .417 x 1.05h (22 x 10.6 x 26.7h) .46 oz (13g) Contact Arrangements 1 Form A 2 Form A 2 Form A 1 Form A 1 Form A 1 Form A 1 Form A AgSnO Ag Alloy AgSnO (DM5 type) AG-GS Alloy (DM3) AgSnO AgSnO AgSnO AgSnO 20A @ 125VAC, 16A @ 240VAC, 16A @ 24VDC 3A @ 120VAC or 24VDC TV-5 @ 120VAC (UL) 10A @ 250VAC or 30VDC TV-8 @ 120VAC (UL) 10A @ 250VAC or 30VDC (Std. Coil) 16A @ 250VAC or 24VDC Series Contact Material Maximum Contact Rating * TV-8 rating * 10A/TV-5 rating * TV-8/TV-5 rating TV-3/4 rating * 4,000 Vrms coil-to- * 4,000 Vrms coil-to- * Standard or Flux-tight case contact breakdown contact breakdown sensitive coil Low profile case 3,000 Vrms coil-to- * Sealed or flux-tight * Sealed or flux-tight * 4,000 Vrms coil-tocase case contact breakdown contact breakdown * Flux-tight case TV-3 @ 120VAC (UL) TV-8 @ 120VAC (UL) TV-4 @ 120VAC (CSA) 16A @ 120VAC or 24VDC 5A @ 120VAC or 30VDC (DM5) * 16A rating * 5,000 Vrms coil-tocontact breakdown * Quick connect terminals for load * Flux-tight case TV-5 @ 120VAC (UL) 5A @ 250VAC or 30VDC (Sens. Coil) 3A @ 120VAC or 24VDC (DM3) 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 1 x 107 1 x 107 2 x 106 Expected Electrical Life at Rated Load 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 2.5 x 104 at TV-8 2.5 x 104 at TV-5 2.5 x 104 at TV-5 or TV-8 Nominal Coil Voltage 12-24VDC 5-24VDC 5-48VDC 5-48VDC 5-48VDC 5-48VDC 5-24VDC Nominal Coil Power 540mW 350mW 540mW 540mW 540mW 250mW (Sensitive) 540mW (Standard) 500mW Mounting Options PC board, Socket PC board PC board PC board PC board PC board PC board Screw terminals, PC terminals -- -- -- -- -- -- 466 468 470 472 474 476 478 Expected Mechanical Life Sockets / Connectors Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xv Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays SCHRACK SCHRACK SCHRACK SCHRACK SCHRACK SCHRACK SCHRACK Series V23057 (Card E) RP II/2 RP II/1 RP 3 SL 0409 V23077 (IF) 0410 Features * 8A rating * Horizontal or vertical version * Single or bifurcated contacts * 4,000 Vrms coil-tocontact breakdown * Washable case * 8A rating * Slim design * Sealed or fluxtight case * 4,000 Vrms coil-tocontact breakdown * 8-16A rating * Slim design * Sealed or fluxtight case * 4,000 Vrms coil-tocontact breakdown * 120A inrush rating * 16A rating * Standard and latching types * Sealed or flux-tight case * 4,000 Vrms coil-tocontact breakdown Approximate Dimensions 1.10" x .984" x .425"h (28.0 x 25.0 x 10.8h) 0.28 oz. (8g) 1.14" x .496" x 1.0"h (29.0 x 12.6 x 25.5h) 0.63 oz. (18g) 1.14" x .496" x 1.0"h (29.0 x 12.6 x 25.5h) 0.63 oz. (18g) 1.12" x .48" x .996"h (28.5 x 12.2 x 25.3h) 0.63 oz. (18g) .96" x .409" x .984"h (24.4 x 10.4 x 25h) 0.35 oz. (10g) Contact Arrangements 1 Form A. 1 Form C 2 Form A, 2 Form C 1 Form A, 1 Form C 1 Form A 1 Form A 1 Form A, 1 Form B, 1 Form A, 1 Form B, 1 Form X (only VDE) AgNi 0.15, AgNi 20, AgCdO AgCdO, AgNi 0.15 AgCdO, AgNi 0.15 AgSnO AgCdO with W prerun AgCdO AgSnO, AgNi (1 Form X only) 8A @ 250VAC 8A @ 250VAC 16A @ 250VAC 12A @ 250VAC 8A @ 250VAC 120A peak inrush 16A @ 250VAC TV-8 @ 120VAC 500A peak inrush 10A @ 250VAC 16A @ 250VAC 16A @ 250VAC 2 x 107 Ops. 2 x 107 Ops. 3 x 107 Ops. 3 x 107 3 x 107 3 x 107 1 x 107 Expected Electrical Life at Rated Load 2.5 x 105 1 x 105 (AgCdO) 1.5 x 105 (AgCdO) 2 x 105 2.5 x 105 1 x 105 (Form A) 5 x 104 (Form B) 1 x 105 (Form A) 1.5 x 105 (Form B) 3 x 104 (Form X) Nominal Coil Voltage 6-60VDC 5-110VDC 5-110VDC 5-60VDC 6-60VDC 6-48VDC 6-60VDC Nominal Coil Power 450-500mW 500mW 500mW 500mW - 1.5W 820mW 360mW 360mW Mounting Options PC board PC board, Socket PC board, Socket PC board PC board PC board PC board Sockets / Connectors -- Screw terminals, PC terminals Screw terminals, PC terminals -- -- -- -- Page Number 480 482 484 486 488 489 491 Contact Material Maximum Contact Rating Expected Mechanical Life 5A @ 250VAC with AgNi 0.15 * * * * 500A inrush rating * 16 rating 10A rating * Quick connect Flux-tight case terminals for load 4,000 Vrms coil-to- * 4,000 Vrms coil-tocontact breakdown contact breakdown * Flux-tight case 2.5 x 104 at TV-8 * 16A rating * Quick connect terminals for load * 4,000 Vrms coil-tocontact breakdown * Form X model provides 3mm contact gap * Flux-tight case 1.594" x .52" x 1.14"h 1.594" x .492" x 1.12"h (40.5 x 13.2 x 29h) (40.5 x 12.5 x 28.5h) 0.92 oz. (26g) 0.85 oz. (24g) Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xvi Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Power Printed Circuit Board Relays Mid-Range P. C. Board Relays OEG SCHRACK P&B OEG P&B P&B P&B P&B PCG 0430 600 PCF T90 T9A 491 T92 Features * TV-5 rating * 4,000 Vrms coilto-contact breakdown * Flux-tight case * 10-16A rating * 4,000 Vrms coilto-contact breakdown * Plastic dust cover * PC board, bracket or panel mount * 3mm contact gap version w/ or w/o magnetic blowout * 15A rating * Sensitive coil * Unsealed dust cover or sealed case * Range of contact materials, ratings * 25A rating * 5,000Vrms coilto-contact breakdown * Flux-tight case * Quick connect terminals for load * 30A rating * Less than 1W coil power requirement * Class F insulation * Open, dust cover or immersion cleanable case * 30A rating * QC and PC terms. * Meets UL 873 / UL 508 spacings * Optional flanged case for panel mounting * 20A rating * QC and PC terms. * Meets UL 873 / UL 508 spacings * Optional flanged case for panel mounting * 30A rating * Two pole unit can break both sides of the AC line * PC board or panel mount * Ideal for HVAC / appliance apps. * 8mm spacing Approximate Dimensions 1.11" x .56" x .98"h 1.15 x .51 x .81h 1.25" x .775" x 1.2"h 1.2" x .63" x 1.04"h 1.20" x .95" x .67"h 1.27" x 1.08" x 1.10"h 1.26" x 1.08" x 1.10"h 2.06" x 1.36" x 1.21"h (28.2 x 14.2 x 24.9h) (29.2 x 12.9 x 20.6h) (31.8 x 19.7 x 30.5h) (30.4 x 16.0 x 26.5h) (30.5 x 24.1 x 16.9h) (32.3 x 27.4 x 27.9h) (32.5 x 27.4 x 27.9h) (52.3 x 34.5 x 30.7h) 3 oz. (86g) 1.2 oz. (33g) 1.6 oz. (45g) .99 oz. (28g) .9 oz. (26g) 0.63 oz. (18g) 0.9 oz. (26g) .46 oz (13g) Series Contact Arrangements 2 Form A 1 Form A through 1 Form A, 1 Form B, 1 Form C 2 Form C 1 Form A 1 Form A, 1 Form C 1 Form A, 1 Form C 1 Form A, 1 Form B 1 Form C 2 Form A, 2 Form C AgSnO AgCdO AgCdO AgCdO AgCdO 20A @ 240VAC 20A @ 28VDC 10A @ 277VAC 98LRA/22FLA @ 120VAC 2 HP @ 240VAC (Form A) 30A @ 277VAC 20A @ 28VDC 10A @ 600VAC TV10A @ 120VAC 2.5 HP @ 240VAC 1 HP @ 120VAC 1 x 107 Ops. 5 x 106 Ops. 1 x 105 1 x 105 Ops. 12-110VDC 24-240VAC AgSnO AgCdO or AgCu 3 Au flashed AgCd, AuAg, AgCdO, Au flashed Coin Ag, Fine Ag, AgCd, Pd TV-5 @ 120VAC 8A @ 250VAC 5A @ 250VAC 16A @ 250VAC (1 pole types) 10A @ 250 VAC (2 pole types) From 15A @ 150VAC for AgCdO to 2A @ 28VDC for Pd 25A @ 250VAC 23A @ 277VAC 1 x 107 Ops. 2.5 x 105 1 x 107 Ops. 1 x 107 Ops. Expected Electrical Life at Rated Load 1 x 105 at 5A 5 x 104 at 8A 2.5 x 104 at TV-5 2.5 x 105 except 1.5 x 105 for 3mm gap type 1 x 105 1 x 105 Nominal Coil Voltage 5-48VDC 12-110VDC 24-230VAC 3-48VDC 6-48VDC 1.0W (DC) 1.8VA (AC) 110mW (3-5A types) 240mW (15A types) PC board PC board, Bracket, Panel PC board -- -- 493 495 Contact Material Maximum Contact Rating Expected Mechanical Life Nominal Coil Power Mounting Options Sockets / Connectors Page Number 540mW 30A @ 240VAC 20A @ 28VDC 6A @ 277VAC 2 HP @ 240VAC (Form A) 1 x 107 Ops. 30A @ 240VAC 20A @ 28VDC 10A @ 277VAC 98LRA/22FLA @ 120VAC 2 HP @ 240VAC (Form A) 1 x 107 Ops. 1 x 105 1 x 105 5-110VDC 5-110VDC 12-220VAC 850-930mW 900mW, 1.0W 2.0VA PC board PC board PC board, Panel mount PC board, Panel mount PC board Panel mount -- -- -- -- -- -- 497 502 504 506 509 511 900mW 1.7W (DC) 4.0VA (AC) Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xvii Catalog 1308242 Issued 3-03 SELECTOR GUIDE Relays with Forcibly Guided Contacts Series Features SCHRACK SCHRACK SCHRACK V23047 (SR2M) SR4 SR6D/M * 8A rating * Forcibly guided contacts * Four poles * Compact size * Use for emergency shutoff; machine, elevator,escalator, light barrier control * 8A rating * Forcibly guided contacts * Four poles * Larger spacings for increased isolation * Use for emergency shutoff; machine, elevator,escalator, light barrier control * 8A rating * Forcibly guided contacts * Six poles * Use for emergency shutoff; machine, elevator,escalator, light barrier control * 8A rating * Forcibly guided contacts * Six poles * Sensitive, polarized coil * Use for emergency shutoff; machine, elevator,escalator, light barrier control * 8A rating * Forcibly guided contacts * Six poles * DIN mount module * Use for emergency shutoff; machine, elevator,escalator, light barrier control * 6A rating * Forcibly guided contacts * Two poles * Use for emergency shutoff; machine, elevator,escalator, light barrier control SCHRACK SCHRACK V23050 (SR6) SR6-Sensitive SCHRACK SR6Z Approximate Dimensions 1.14" x .50" x 1.0"h (29 x 12.7 x 25.4h) 0.6 oz. (18g) 1.57" x .51" x .63"h (40 x 13 x 16h) 0.56 oz. (16g) 2.165" x .65" x .63"h (55 x 16.5 x 16h) 1.06 oz. (30g) 2.17" x .65" x .63"h (55.0 x 16.5 x 16.0h) 1.01 oz. (30g) 2.17" x .65" x .63"h (55.0 x 16.5 x 16.0h) 1.01 oz. (30g) 1.81" x 3.42" x .2.12"h (46 x 87 x 54h) 3.17 oz. (90g) Contact Arrangements 1 Form A + 1 Form B, 2 Form C 2 Form A + 2 Form B, 3 Form A + 1 Form B 2 Form A + 2 Form B, 3 Form A + 1 Form B 4 Form A + 2 Form B, 3 Form A + 3 Form B, 5 Form A + 1 Form B 4 Form A + 2 Form B, 3 Form A + 3 Form B, 5 Form A + 1 Form B 4 Form A + 2 Form B, 3 Form A + 3 Form B, 5 Form A + 1 Form B AgNi AgNi AgNi AgNi AgNi AgNi Maximum Contact Rating 6A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC Expected Mechanical Life 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. Expected Electrical Life at Rated Load -- -- -- -- -- -- Nominal Coil Voltage 5-110VDC 5-110VDC 5-110VDC 5-110VDC 5-48VDC 24VDC, 24VAC/VDC, 115VAC/VDC, 230VAC Nominal Coil Power 700mW 800mW 1.2W 1.2W Mounting Options PC board, Socket PC board PC board PC board PC board PC board Screw terminals, PC terminals -- -- -- -- -- 603 606 607 609 611 613 Contact Material Sockets / Connectors Page Number 800mW -- Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xviii Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Plug-in / Panel Mount Relays Series P&B P&B OEG SCHRACK P&B P&B SCHRACK R10 KHA/KHS PCL(H) PT K10 KUP RM2/3/7 * * * * * 15A rating Compact package DPDT Smoked dust cover Various mounting configurations * AC and DC coils * 10A rating * Open or enclosed * Plain or bracket mount dust covers * Optional indicator lamp and push-totest button * Several socket styles * 10-16A rating * Mechanical indicator standard * Plain or bracket mount dust covers * Several socket styles .886" x 1.1" x 1.14"h (22.5 x 28 x 29h) 1.06 oz. (30g) 1.11" x .86" x 1.28"h (28.2 x 21.8 x 34.9h) 1.8 oz. (51g) 1.53" x 1.41" x 1.91"h 1.52" x 1.40" x 1.91"h (38.9 x 35.7 x 48.4h) (38.5 x 35.5 x 48.4h) 3 oz. (85g) 3.2 oz. (92g) * 3-15A rating * Compact package * One through four poles * Smoked dust cover * AC and DC coils Features * 0 - 7.5A rating * Up to 8 poles * Highly sensitive coils available * Many contact options * Various case, terminal and mounting styles * * * * * Approximate Dimensions 1.17" x .74" x 1.18"h (29.6 x 18.7 x 30.2h) 1.0 oz. (28g) 1.11" x .86" x 1.28"h 1.08 x .83 x 1.32h (28.2 x 21.8 x 34.9h) (27.5 x 21.2 x 33.6h) 1.6 oz. (45g) 1.13 oz (32g) Contact Arrangements 1 Form C to 8 Form C 2 Form C, 4 Form C 1 Form A through 4 Form C 2 Form C, 3 Form C 4 Form C 2 Form C 1 Form A to 4 Form C 2 Form C, 3 Form C AgCdO, Ag, Au overlay Ag Ag, AgCdO, AuAgNi, Au overlay Ag, Au diffused Ag Ag (4 pole only), Ag Alloy AgNi 90/10, Au plated AgNi 90/10 AgCdO Ag AgCdO AgCdO 15A @ 30VDC or 120VAC 10A @ 277VAC 1/3HP @ 120VAC 1/2HP @ 240VAC 5A @ 28VDC or 240VAC 10A @ 28VDC or 240VAC 1/3HP @ 120VAC 1/2HP @ 250-600VAC 16A @ 400VAC (RM2/7) 10A @ 400VAC (RM3) Contact Material Maximum Contact Rating 0 - 5A rating Compact package 2PDT & 4PDT Smoked dust cover Various mounting configurations * Indicator lamp available * Hermetically sealed case option Dry circuit to 5A Dry circuit to 7.5A @ 28VDC or 115VAC @ 28VDC or 240VAC 1/10HP @ 1/8HP @ 110-120VAC 120-240VAC 1/6HP @ 220-240VAC * 6 - 12A rating * Low profile * DPDT, 3PDT & 4PDT * Mechanical indicator * Manual test with locking tab option * AC and DC coils 3A to 15A 12A@240VAC (DPDT) @ 250VAC or 24VDC 8A@240VAC (3PDT) resistive 6A@240VAC (4PDT) 1 x 108 Ops. 1 x 107 Ops. 1 x 108 Ops. 3 x 107 Ops. (DC coil) 2 x 107 Ops. (AC coil) 1 x 107 Ops. 1 x 107 Ops. 2 x 107 Ops. Expected Electrical Life at Rated Load 2 x 104 to 6 x 105 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 Nominal Coil Voltage 3-115VDC 6-115VAC 6-110VDC 6-240VAC 6-110VDC 6-240VAC 6-220VDC 6-230VAC 6-110VDC 6-240VAC 6-110VDC 6-240VAC 6-220VDC 6-400VAC Nominal Coil Power 36mW to 1.6W (DC) 1.5VA (AC) 0.9W (DC) 1.2VA (AC) 0.9 - 1W (DC) 1.4VA (AC) 0.75W (DC) 1VA (AC) 0.9W (DC) 1.2VA (AC) 1.2-1.8W (DC) 2.0-2.75VA (AC) 1.2-1.6W (DC) 2.3-2.8VA (AC) Mounting Options Socket, Panel mount, PC board Socket, Panel mount, PC board Socket, Panel mount, PC board Socket, PC board Socket, Panel mount, PC board Socket, Panel mount, PC board Socket, Panel mount Screw terminal, Solder terminal, PC terminal Screw terminal, Solder terminal, PC terminal Screw terminal, Solder terminal, PC terminal Screw terminal, Solder terminal, PC terminal Screw terminal, Solder terminal, PC terminal Screw terminal, Solder terminal, PC terminal, Quick connect terminal Screw terminal, Solder terminal, PC terminal, Quick connect terminal 703 709 713 717 720 723 733 Expected Mechanical Life Sockets / Connectors Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xix Catalog 1308242 Issued 3-03 SELECTOR GUIDE Plug-in / Panel Mount Relays P&B P&B P&B SCHRACK P&B P&B P&B KUEP KUIP KUGP RM5/6 KUMP KUP93 KRPA/KRP Features * 10A rating * Switches DC currents. * Magnetic blowout * Plain or bracket mount dust covers * Optional indicator lamp * 10A rating * 8mm coil-tocontact spacing * Plain or bracket mount dust covers * Several socket styles * 10A rating * 3mm contact gap * 8mm coil-to- contact spacing * Plain or bracket mount dust cover * Several socket styles * 10-16A rating * Mechanical indicator standard * Optional push-totest button * 3mm contact gap * Plain or bracket mount dust cover * Several socket styles * 15A rating * Open or enclosed * Plain or bracket mount dust covers * Optional indicator lamp and push-totest button * Several socket styles * 3-10A rating * Designed primarily for HVAC industry * Accepted pin pattern for HVAC * Plain dust cover Approximate Dimensions 1.53" x 1.41" x 1.91"h 1.53" x 1.41" x 1.91"h (38.9 x 35.7 x 48.4h) (38.9 x 35.7 x 48.4h) 3 oz. (85g) 3 oz. (85g) 1.53" x 1.41" x 1.91"h (38.9 x 35.7 x 48.4h) 3 oz. (85g) 1.52" x 1.40" x 1.91"h 1.53" x 1.41" x 1.91"h 1.53" x 1.41" x 1.91"h 1.41" x 1.41" x 2.00"h (38.5 x 35.5 x 48.4h) (38.9 x 35.7 x 48.4h) (38.9 x 35.7 x 48.4h) (35.7 x 35.7 x 50.8h) 3 oz. (85g) 3.2 oz. (92g) 3 oz. (85g) 3 oz. (85g) Contact Arrangements 1 Form X, 2 Form A, 2 Form C 1 Form A to 3 Form C 1 Form A, 2 Form A, 3 Form A, 1 Form X 2 Form A 3 Form A 1 Form A to 3 Form C 3 Form C 1 Form C to 3 Form C AgCdO Ag, AgCdO AgCdO AgCdO AgCdO Ag AgCdO Ag AgCdO 16A @ 400VAC (RM5) 10A @ 400VAC (RM6) 15A @ 277VAC 10A @ 28VDC or 240VAC 1/3HP @ 120VAC 1/2HP @ 250-600VAC 3A @ 32VDC or 250VAC 5A @ 28VDC or 240VAC 10A @ 28VDC or 240VAC 5A @ 28VDC or 120VAC 10A @ 28VDC or 240VAC 1/3HP @ 120VAC 1/2HP @ 240VAC Series Contact Material Maximum Contact Rating 10A @ 150VDC (1X) 5A @ 150VDC (2A) 3A @ 150VDC (2C) 5A @ 28VDC or 5A @ 28VDC or 240VAC 240VAC 10A @ 28VDC or 10A @ 28VDC or 240VAC 240VAC 1/3HP @ 120VAC 1/3HP @ 120VAC 1/2HP @ 250-600VAC 1/2HP @ 250-600VAC * * * * 10A rating Octal-type plug Dust cover Optional indicator lamp 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 2 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. Expected Electrical Life at Rated Load 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 Nominal Coil Voltage 6-110VDC 6-240VAC 6-110VDC 6-240VAC 6-110VDC 6-240VAC 6-220VDC 6-400VAC 6-110VDC 6-240VAC 6-110VDC 6-240VAC 6-110VDC 6-240VAC Nominal Coil Power 1.2-1.8W (DC) 2.0-2.7VA (AC) 1.2W (DC) 2.0-2.7VA (AC) 1.8W (DC) 2.7VA (AC) 1.6W (DC) 2.8VA (AC) 1.2W (DC) 2.7VA (AC) 1.2W (DC) 2.0-2.7VA (AC) 1.2W (DC) 2.0VA (AC) Mounting Options Socket, Panel mount, PC board Socket, Panel mount, PC board Socket, Panel mount, PC board Socket, Panel mount Socket, Panel mount, PC board Socket Socket Screw terminal, Solder terminal, PC terminal, Quick connect terminal Screw terminal, Solder terminal, PC terminal, Quick connect terminal Screw terminal, Solder terminal, PC terminal, Quick connect terminal Screw terminal, Solder terminal, PC terminal Screw terminal, Solder terminal, PC terminal, Quick connect terminal PC terminal Screw terminal 723 723 723 733 723 731 737 Expected Mechanical Life Sockets / Connectors Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xx Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Plug-in / Panel Mount Relays Power Relay SCHRACK P&B P&B P&B SCHRACK SCHRACK P&B MT KR-E KA KRP-3H RM8 0419 KUHP Features * 10A rating * Lockable push-totest button * Octal-type plug * Optional LED, protection and timing modules * Mechanical indicator * 10A rating * Hermetically sealed steel case for use in hazardous locations * Octal-type plug * 10A rating * Compact, openstyle relay * Ruggedly constructed * Cost effective * Highly efficient for switching light power loads * 20A rating * Available as open relay or with dust cover and octaltype plug Approximate Dimensions 1.40" x 1.40" x 2.24"h 1.44" x 1.66" x 2.12"h (36.6 x 42.2 x 53.8h) (35.5 x 35.5 x 57h) 4.8 oz. (136g) 2.82 oz. (80g) 1.92" x 1.47" x 1.38"h (48.8 x 37.3 x 34.9h) 1.7 oz. (48g) - KA 1.53" x 1.41" x 2.28"h 1.52" x 1.40" x 1.91"h (38.9 x 35.7 x 57.9h) (38.5 x 35.5 x 48.4h) 2 oz. (57g) 3.2 oz. (92g) Series * 25A rating * Enclosed * Integral mechanical indicator standard * Bracket mount case * 2,500Vrms coil-tocontact breakdown * 16A rating * 20 - 30A rating * Compatible with * Various mounting RAST 5 connector options * 3mm contact gap * 3,750Vrms coil-to* 4,000Vrms coil-tocontact breakdown contact breakdown * Designed for European domestic appliances 1.85" x .98" x 1.85"h (47 x 24 x 47h) 3.2 oz. (92g) 1.53" x 1.41" x 1.91"h (38.9 x 35.7 x 48.4h) 3.2 oz. (92g) 2 Form C, 3 Form C 1 Form A to 3 Form C 1 Form A to 3 Form C 1 Form X 2 Form C 2 Form A 1 Form C to 2 Form C AgNi 90/10 Au overlay AgNi 90/10 Ag AgCdO Ag AgCdO AgCdO AgCdO AgCdO, AgNi AgCdO 10A @ 250VAC (4A @ 250VAC for bifurcated contacts) 1/2HP @ 240VAC 1/4HP @ 120VAC 5A @ 28VDC or 120VAC 10A @ 28VDC or 240VAC 1/6HP @ 120VAC 5A @ 120VAC 10A @ 120VAC 6A @ 240VAC 1/6HP @ 120VAC 1/3HP @ 240VAC 20A @ 120VAC 1HP @ 120/240VAC 25A @ 250VAC 2HP @ 240VAC 1.5HP @ 120VAC 16A @ 250VAC (1C) 30A @ 240VAC 25A @ 28VDC 1HP @ 120VAC (2C) 20A @ 240VAC or 28VDC 3/4HP @ 120VAC 2 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 2.5 x 106 Ops. 2 x 107 Ops. 2 x 106 Ops. 1 x 107 Ops. Expected Electrical Life at Rated Load 3 x 105 1 x 105 1 x 105 1 x 105 3 x 104 1 x 105 (AC coil) 1 x 105 Nominal Coil Voltage 6-220VDC 6-230VAC 6-110VDC 6-240VAC 6-110VDC 6-240VAC 6-110VDC 6-240VAC 12-24VDC 24-115VAC 12-24VDC 110-400VAC, 50 Hz. 12-24VDC 24-120VAC Nominal Coil Power 1.2W (DC) 2.3VA (AC) 1.2W (DC) 2.0VA (AC) 1.2W (DC) 2.0VA (AC) 1.2W (DC) 2.0VA (AC) 1.2W (DC) 2.8VA (AC) 1.3W (DC) 2.0-2.5VA (AC) 1.2W (DC) 2.7VA (AC) Mounting Options Socket Socket Panel mount Socket, Panel mount Panel mount Panel mount Panel mount Screw terminal Screw terminal -- Screw terminal Screw terminal, Solder terminal, PC terminal, Quick connect terminal -- -- 742 737 737 737 733 745 803 Contact Arrangements Contact Material Maximum Contact Rating Expected Mechanical Life Sockets / Connectors Page Number 2.5 x 105 (DC coil) Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xxi Catalog 1308242 Issued 3-03 SELECTOR GUIDE Power Relays & Definite Purpose Contactors Series SCHRACK P&B P&B P&B PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED RM C/D S86/S87 PM PRD 9400 9100 38 * 25A rating * 4PDT * High dielectric strength * Screw or quick connect terminals * Dust cover available * 10-50A rating * High inrush capacity * Available with magnetic blowouts * Optional auxiliary switch * 8-12FLA rating * Used extensively in HVAC applications * Double make and double break contacts * Various mounting bracket options * 3-12FLA rating * Used extensively in HVAC applications * Single and double pole models * Multi-positional mounting * 35A rating * Used extensively in HVAC applications * Potential motor starting relay * Various mounting postions and brackets * Custom-built to customer specs 3.38" x 2.51" x 2.50"h 1.84" x 1.26" x 1.5"h (85.7 x 63.8 x 63.5h) (46.8 x 32.1 x 38.1h) 2.9 oz. (82g) 10 oz. (284g) Features * 20A rating * 30A rating * Economical * Enclosed switching in a * Optional push-tocompact package test button, LED * Choice of two indicator and mounting brackets protection diode * Bracket mount case * 2,500Vrms coil-tocontact breakdown Approximate Dimensions 1.52" x 1.40" x 1.91"h (38.5 x 35.5 x 48.4h) 3.2 oz. (92g) 1.31" x 2.07" x 2.42"h (33.3 x 52.6 x 61.5h) 2.9 oz. (82g) 3.39" x 2.66" x 2.72"h (86.2 x 67.5 x 69.1h) 14 oz. (397g) Contact Arrangements 1 Form X, ! Form Z 1 Form C, 2 Form C 4 Form C 1 Form A to 2 Form C 1 Form X, 1 Form Y, 1 Form Z, 1 Form C (jumpered 1 Form X) 1 Form A through 2 Form C, including mixed forms 1 Form B AgCdO Ag, AgCdO AgCdO Ag, AgCdO Fine Ag (pilot), AgAlloy Ag, Fine Ag, AuAlloy (pilot) AgCdO 30A @ 250VAC 20A @ 277VAC 1HP @ 125VAC 2HP @ 250VAC 25A @ 277VAC 10A @ 28VDC 1HP @ 240VAC 50A @ 277VAC 30A @ 277VAC 20A @ 125VDC 1.5HP @ 120VAC 2HP @ 250VAC 12FLA/60LRA @ 125VAC 8FLA/48LRA @ 240/277VAC 25A @ 240/277VAC, resistive (Form X) 12FLA/60LRA @ 125VAC 6FLA/35LRA @ 250/277VAC 25A @ 240/277VAC, resistive (Form A) 35A @ 277VAC, inductive 1 x 107 Ops. 1 x 106 Ops. 1 x 107 Ops. 2 x 106 Ops. 1 x 106 Ops. 1 x 106 Ops. 7.5 x 105 Ops. Expected Electrical Life at Rated Load 4.5 x 104 5 x 104 1 x 105 1 x 105 1 x 105 (inductive load) 2.5 x 105 (resistive load) 1 x 105 (inductive load) 2.5 x 105 (resistive load) 2.5 x 105 Nominal Coil Voltage 6-220VDC 24-400VAC 6-125VDC 12-240VAC 6-125VDC 12-20VAC 6-110VDC 6-480VAC 12-24VDC 6-277VAC 12-24VDC 24-277VAC 130-495VAC Nominal Coil Power 1.2W (DC) 2.8VA (AC) 1.13-4.5W (DC) 4.0VA (AC) 4.4W (DC) 14VA (AC) 2.0W (DC) 9.8VA (AC) 3.0W (DC) 4.0VA (AC) 5.75W (DC) 9.5VA (AC) 5VA Mounting Options Panel mount Panel mount Panel mount Panel mount Panel mount Panel mount Panel mount -- -- -- -- -- -- -- 805 807 809 811 814 816 818 Contact Material Maximum Contact Rating Expected Mechanical Life Sockets / Connectors Page Number 2.11" x 1.83" x 2.36"h 2.03" x 1.82" x 1.82"h (53.6 x 46.5 x 60.1h) (51.6 x 46.2 x 46.2h) 6.1 oz. (173g) 5.8 oz. (164g) Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xxii Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Power Relays & Definite Purpose Contactors Series Features P&B P&B P&B PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED P25 P30/P40 P31/P41 Mod. 2000 96-3100 98-3100 93-3100 16 - 40FLA rating P31 is 3 pole P41 is 4 pole Universal mounting plate * Various terminal options * 25-30FLA rating * 1 or 2 pole * New design is small, lightweight * Enclosed case and plastic base for quiet operation * Design permits direct access to mounting holes * * * * 20-40FLA rating 1 or 2 pole Robust design Arc cover standard on 40FLA types, optional on others * Convenient mounting plate * 20-40FLA rating * 3 pole * Arc cover standard on 40FLA types, optional on others * Convenient mounting plate * Optional auxiliary switches * Manual test button * * * * 2.63" x 3.80" x 2.87"h (64.8 x 96.5 x 72.9h) 18oz. (510g) 2.125" x 3" x 2.125"h (54.0 x 76.2 x 54.0h) 4.9 oz. (140g) 2.1" x 3.3" x 2.541"h (53.3 x 83.8 x 64.5h) 8 oz. (227g) 2.375" x 3.75" x 3"h (60.3 x 95.2 x 76.2h) 16 oz. (455g) 2.75" x 3.75" x 3.56"h (69.9 x 95.2 x 90.5h) 32 oz. (910g) * 25FLA rating * Control 3O loads * Field replaceable contacts * Optional auxiliary switch * Universal mounting plate .. TUV Rheinland * * * * 30 - 40FLA rating P30 switches 30A P40 switches 40A Field replaceable contacts * Optional auxiliary switch * Universal mounting plate * * * * 50-60FLA rating 3 pole Arc cover standard Convenient mounting plate * Optional auxiliary switches .. .. TUV Rheinland TUV Rheinland Approximate Dimensions 2.50" x 3.80" x 3.33"h 2.55" x 3.80" x 3.98"h (64.8 x 96.5 x 63.5h) (67.3 x 96.5 x 101.1h) 14 oz. (397g) 28oz. (794g) Contact Arrangements 3 Form X and 2 Form X + 1 Form Y 3 Form X to 4 Form Y 3 Form X to 4 Form X 1 Form X w/ or w/o shunt, 2 Form X 1 Form X w/ or w/o shunt, 2 Form X 3 Form X 3 Form X AgCdO AgCdO AgCdO AgCdO AgCdO AgCdO AgCdO 25FLA/100LRA @ 600VAC 30A res. @ 600VAC (P30) 30FLA/120LRA @ 600VAC 40A res. @ 600VAC (P40) 40FLA/160LRA @ 600VAC 50A res. @ 600VAC 40FLA/160LRA @ 600VAC 50A res. @ 600VAC 30FLA/150LRA @ 277VAC 40A res. @ 277VAC 40FLA/240LRA @ 240/277VAC 40FLA/200LRA @ 480VAC 40FLA/160LRA @ 600VAC 50A res. @ 600VAC 40FLA/240LRA @ 240/277VAC 40FLA/200LRA @ 480VAC 40FLA/160LRA @ 600VAC 50A res. @ 600VAC 60FLA/360LRA @ 240VAC 60FLA/300LRA @ 480VAC 60FLA/240LRA @ 600VAC 75A res. @ 600VAC 5 x 105 Ops 5 x 105 Ops. -- -- -- Contact Material Maximum Contact Rating Expected Mechanical Life 2 x 106 Ops. (DC coil) 2 x 106 Ops. (DC coil) 5 x 106 Ops. (AC coil) 1 x 107 Ops. (AC coil) Expected Electrical Life at Rated Load 5 x 105 2 x 105 2 x 105 2 x 105 -- -- -- Nominal Coil Voltage 12-24VDC 120-240VAC 21-120VDC 24-277VAC 12 & 24VDC 24-277VAC 24-277VAC 24-480VAC 24-480VAC Nominal Coil Power 4.8W (DC) 10VA (AC) 7.5W (DC) 12VA (AC) 8W 6VA 5.25-7.0VA 5.0VA 14.0VA Mounting Options Panel mount Panel mount Panel mount Panel mount Panel mount Panel mount Panel mount -- -- -- -- -- -- -- 820 823 826 828 830 832 834 Sockets / Connectors Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xxiii Catalog 1308242 Issued 3-03 Power Relays & Definite Purpose Contactors Series SELECTOR GUIDE Latching, Impulse, Rotary & Special Application Relays PRODUCTS UNLIMITED PRODUCTS UNLIMITED PRODUCTS UNLIMITED SCHRACK OEG SCHRACK P&B 93-3100 96-3186 A-3100 PE (latching) PCKWK RT (latching) KUL Features * 25-40FLA rating * 4 pole * Arc cover standard on 40FLA types, optional on others * Convenient mounting plate * Optional auxiliary switches * * * * Approximate Dimensions 3.05" x 3.75" x 2.63"h (77.6 x 95.2 x 66.9h) 24 oz. (683g) 3.75" x 5.0" x 4.06"h 4.625" x 6.375" x 5.0"h .787" x .394" x .394"h (20 x 20 x 10h) (95.2 x 127 x 103h) (117.5 x 161.9 x 127h) .18 oz. (5g) 128 oz. (3,640g) 64 oz. (1,820g) Contact Arrangements 4 Form X 3 Form X 3 Form X AgCdO AgCdO AgCdO Contact Material Maximum Contact Rating 40FLA/240LRA @ 240/277VAC 40FLA/200LRA @ 480VAC 40FLA/160LRA @ 600VAC 50A res. @ 600VAC 75-90FLA rating 3 pole Arc cover standard Convenient mounting plate * Optional auxiliary switches * * * * 120FLA rating 3 pole Arc cover standard Convenient mounting plate * Optional auxiliary switches 120FLA/720LRA @ 90FLA/540LRA @ 240VAC 240VAC 120FLA/600LRA @ 90FLA/450LRA @ 480VAC 480VAC 120FLA/480LRA @ 90FLA/360LRA @ 600VAC 600VAC 120A res. @ 600VAC 150A res. @ 600VAC * 5A rating * Magentic latching relay * Single coil * 16A rating * Magentic latching relay * Dual coil * 16A rating * Magentic latching relay * Single or dual coil * 10A rating * Magentic latching relay * Single or dual coil * Sockets available .957" x .457" x 1.05"h (24.3 x 11.6 x 26.7h) .49 oz. (14g) 1.14" x .50" x .62"h (29 x 12.7 x 15.7h) .46 oz. (13g) 1.53" x 1.41" x 2.16"h (38.9 x 35.7 x 54.8h) 3.4 oz. (96g) 1 Form C 1 Form A 1 Form C, 2 Form C 1 Form C, 2 Form C, 3 Form C AgNi 90/10 AgSnO AgNi 90/10 Ag AgCdO 5A @ 250VAC 16A @ 277VAC 16A @ 240VAC (1 pole) 8A @ 240VAC (2 pole) 5A @ 28VDC or 240VAC 10A @ 28VDC or 240VAC 1/4HP @ 120VAC 1/3HP @ 250-600VAC Expected Mechanical Life -- -- -- 5 x 106 Ops. 5 x 106 Ops. 5 x 106 Ops. (1 pole) 2 x 106 Ops. (2 pole) 1 x 107 Ops. Expected Electrical Life at Rated Load -- -- -- 1 x 105 1 x 105 1 x 104 (1 pole) 3 x 104 (2 pole) 1 x 105 Nominal Coil Voltage 24-480VAC 24-480VAC 24-480VAC 32-24VDC 312VDC 5-24VDC 12-48VDC 24-240VAC Nominal Coil Power 9.0-9.5VA 27.0VA 40.0-48.0VA 360mW 1,800mW (set) 800mW (reset) 400mW (1 coil) 600mW (2 coil) 1.6W (DC dual coil) 1.2W (DC single coil) Mounting Options Panel mount Panel mount Panel mount PC board PC board PC board Socket -- -- -- -- -- -- Screw terminal, Solder terminal, PC terminal, Quick connect terminal 836 838 840 902 904 906 908 Sockets / Connectors Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xxiv Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Latching, Impulse, Rotary & Special Application Relays Series P&B P&B P&B P&B AGASTAT AGASTAT AGASTAT KB-KBP S89/S90 MDR 136 GP ML TR * 20A rating * Traffic control (flash transfer) relay * Clear plastic dust cover with 8position Jones plug * CALTRANS and NEMA approved * 10A rating * Control relay * Articulated design produces wide contact gap * Plastic dust cover * Optional mag. blow-out * Sockets available * 10A rating * Magnetic latching control relay * Articulated design produces wide contact gap * Plastic dust cover * Optional mag. blow-out * Sockets available * 10A rating * On- delay timing control relay * Articulated design produces wide contact gap * Plastic dust cover * Optional mag. blow-out * Sockets available 1.77" x 1.77" x 4.3"h (45.0 x 45.0 x 109.0h) 10.3 oz. (288g) 1.77" x 1.77" x 4.3"h (45.0 x 45.0 x 109.0h) 10.3 oz. (288g) 1.77" x 1.77" x 4.3"h (45.0 x 45.0 x 109.0h) 10.3 oz. (288g) Features * 10A rating * Dual coil, mechanical latching relay * Available as an open relay or in a clear dust cover with plug-in base * Up to 5 poles * Sockets available * 10 - 20A rating * 10A rating * Low cost, bistable, * Rotary relay impulse relay * Withstands high* Optional dust cover impact shock blows with plug-in base with no contact * Up to 4 poles chatter * Latching & nonlatching types * Up to 24 poles Approximate Dimensions 1.78" x 2.41" x 3.56"h (45.2 x 61.1 x 90.4h) 10.8 oz. (306g) 2.70" x 2.00" x 2.42"h (68.6 x 50.8 x 61.5h) 7.8 oz. (241g) Contact Arrangements 2 Form C to 5 Form C 1 Form A to 4 Form C 4 Form C to 24 Form C 2 Form C 4 Form C 4 Form C 4 Form C AgCdO Ag AgCdO Ag AgCdO AgPd Ag Plated Ag Plated Ag Plated 10A @ 120VAC (S89) 15A @ 250VAC 1/2 HP @ 125VAC (S90) 20A @ 277VAC 2 HP @ 250VAC 10A @ 115VAC 3A @ 28VDC 800mA @ 125VDC 20A Tungsten @ 120VAC 5 x 105 Ops. 1 x 105 Ops. -- 5 x 106 Ops. Expected Electrical Life at Rated Load 5 x 104 5 x 104 -- 2.5 x 105 Nominal Coil Voltage 12-110VDC 24-240VAC 6-24VDC 24-240VAC 28-125VDC 115-440VAC 120VAC 12-250VDC 24-220VAC 12-250VDC 24-220VAC 24-215VDC 120VAC Nominal Coil Power 2.7W (DC) 5.3-7.8VA (AC) 6.33W (DC) 9VA (AC) 5.1-21.8W 10VA 6W 6VA 6W 6VA 6W 6VA Mounting Options Socket Panel mount, Socket Panel mount Socket Socket Socket Socket Screw terminal, Solder terminal Screw terminal -- 8-position Jones plug Screw terminal Screw terminal Screw terminal 910 912 914 916 917 917 917 Contact Material Maximum Contact Rating Expected Mechanical Life Sockets / Connectors Page Number 2.63" x 2.63" x 3.13"h 2.375" x 1.75" x 2.8"h (66.7 x 66.7 x 79.5h) (60.3 x 44.4 x 71.1h) 11 oz. (312g) 32 oz. (900g) 10A @ 120VAC 10A @ 120VAC 10A @ 120VAC 1 x 108 Ops. 1 x 108 Ops. 1 x 108 Ops. 1 x 106 1 x 106 1 x 106 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xxv Catalog 1308242 Issued 3-03 SELECTOR GUIDE Automotive Relays TYCO TYCO TYCO TYCO TYCO TYCO TYCO TYCO ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS V23086 T72M Features * 20A rating * Micro-miniature PC board relay * 60% less volume than comparable relays * Sealed case * 20A rating * Miniature PC board relay * Sealed case * 105C Ambient Approximate Dimensions .472" x .508" x .39"h (12.0 x 12.9 x 9.9h) 0.14 oz. (4g) .89" x .65" x .67"h .911" x .748" x .715"h 1.46" x .65" x .67"h .610" x .906" x 1.02"h 1.12" x 1.12" x .987"h 1.04" x 1.04" x .992"h 1.12" x 1.12" x 1.6"h (22.5 x 16.5 x 17h) (23.1 x 19.0 x 18.2h) (37.1 x 16.5 x 17h) (15.5 x 23 x 26h) (28.5 x 28.5 x 25.1h) (26.5 x 26.5 x 25.2h) (28.5 x 28.5 x 40.5h) 0.9 oz. (25g) 0.4 oz. (12g) 0.7 oz. (20g) 0.7 oz. (19.8g) 1.3 oz. (37g) 1.1 oz. (31g) 1.1 oz. (31g) Contact Arrangements 1 Form C 1 Form C 1 Form A, 1 Form C 2 x 1 Form C (H-Bridge) 1 Form A, 1 Form C Contact Material AgNi 0.15 AgSnO AgNi 0.15 AgSnO AgNi 0.15 PdCu, AgSnO AgSnO AgNi 0.15 AgSnO AgNi 0.15 20A @ 14VDC 20A @ 14VDC 40A @ 14VDC 20A @ 14VDC Expected Mech. Life 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. Expected Electrical Life at Rated Load 1 x 105 1 x 105 Nominal Coil Voltage 12VDC 12 & 24VDC Series Contact Rating @ 85C (Form A only, nominal coil voltage) .8W VKP * 40A rating * PC board relay * Available open or with sealed case * Various contact arrangements * Minimum PCB real estate V2R * 20A rating * Motor reversing contact arragement * Sealed case * Miniature PC board relay * 105C ambient VF7 VTF * 20A rating * Miniature relay for plug-in or PC board mounting * Plastic enclosure * Various contact arrangements * 40A rating * Plug-in or PC board mountable relay * Various enclosure options * Various contact arrangements * Optional mounting bracket * 70A rating * Plug-in or PC board mountable relay * 1 Form A contact arrangement * Optional mounting bracket * 279W rating * Turn signal, hazard, or combination versions * Flash rate not sensitive to load current * Electronic timing with relay output * Meets applicable U.S. standards 1 Form A AgSnO AgNi 0.15 AgNi 0.15 PdCu AgCu 20A @ 14VDC 40A @ 14VDC 70A @ 14VDC 55W to 275W (Lamp) 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 107 Ops. 1 x 105 1 x 105 1 x 105 1 x 105 1 x 105 1 x 106 - 3 x 106 (Load dependent) 12 & 24VDC 12VDC 12VDC 12 & 24VDC 12VDC 12VDC 1.6W .64W .91W 1.6W 1.6W-1.81W 2.0W 1.6W Plug-in PC board, Plug-in, Bracket .55W Mounting Options PC board PC board PC board PC board - -- -- -- 1002 1005 1007 1012 Page Number VF4 1 Form A Nominal Coil Power Sockets / Connectors VFM 1 Form A, 1 Form C Plug-in, Bracket Plug-in PC terminal socket, PC terminal socket, Wiring harness style PC terminal socket, wiring harness wiring harness style connector wiring harness style style connector connector with or connector with or without bracket without bracket 1014 1017 1021 1024 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xxvi Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Solid State Relays & Input/Output Modules Series P&B P&B P&B P&B P&B P&B P&B P&B SSRT SSR SSRD SSRQ IAC OAC IDC ODC * 0.05A output rating * AC input module * Industry standard 0.6" (15.2mm) wide package * Series operation compatible * 5A output rating * AC output module * Industry standard 0.6" (15.2mm) wide package * Series operation compatible * 0.05A output rating * DC input module * Industry standard 0.6" (15.2mm) wide package * Series operation compatible * 3A output rating * DC output module * Industry standard 0.6" (15.2mm) wide package * Series operation compatible Features * 10 - 25A rating * "Hockey Puck" package * LED indicator * Triac output * AC & DC input Approximate Dimensions 1.75" x 2.25" x .87"h 1.75" x 2.25" x .87"h 1.75" x 2.25" x .89"h 1.75" x 2.3" x .85"h 1.7" x .60" x 1.25"h 1.7" x .60" x 1.25"h 1.7" x .60" x 1.25"h 1.7" x .60" x 1.25"h (44.4 x 57.2 x 22h) (44.4 x 57.2 x 22h) (44.4 x 57.2 x 22.6h) (44.4 x 58.4 x 21.6h) (43.2 x 15.2 x 31.8h) (43.2 x 15.2 x 31.8h) (43.2 x 15.2 x 31.8h) (43.2 x 15.2 x 31.8h) 1.48 oz. (42g) 3.5 oz. (98g) 3.5 oz. (98g) 3.5 oz. (98g) 1.48 oz. (42g) 3.5 oz. (98g) 1.48 oz. (42g) 1.48 oz. (42g) * 25 - 125A rating * "Hockey Puck" package * LED indicator * Inverse parallel SCR output * AC & DC input * 25-40A rating * 20A rating per per output output * Two independent * Four independent solid state relays solid state relays in one "Hockey in one "Hockey Puck" package Puck" package * Inverse parallel * Triac output SCR output 1 Form A 1 Form A (2) x 1 Form A (4) x 1 Form A 1 Form A (sinking) 1 Form A 1 Form A (sinking) 1 Form A Optical Optical Optical Optical Optical Optical Optical Optical 3-32VDC 90-280VAC 3-32VDC 90-280VAC 4-15VDC 4-15VDC 18-36VAC/VDC 90-140VAC/VDC 180-280VAC/VDC 5VDC 15VDC 24VDC 3.3-32VDC 4-32VDC 10-60VDC 5VDC 15VDC 24VDC Output Switching Zero Zero, Random Zero, Random Zero, Random Random Zero Random Random Min. Output Current .1A .05 or .1A (model dependent) .1A .15A >0 .05A >0 .01A Max. Output Current 25A 125A 40A 20A 0.05A 3A to 5A 0.05A 1A @ 250V 3A @ 60V Switch Arrangement Coupling Input Min. Output Voltage 24V 24 or 48V (model dependent) 24V 24V >0 24V >0 Max. Output Voltage 280V 280 or 660V (model dependent) 280V 280V 30V 280V 30V 60V, 250V Output Type AC AC AC AC DC AC DC DC Terminals Screw Screw Quick connect Quick connect Printed circuit Printed circuit Printed circuit Printed circuit Mounting Chassis mount Chassis mount Chassis mount Chassis mount Mounting board Mounting board Mounting board Mounting board 1102 1104 1106 1108 1110 1110 1110 1110 Page Number 3V Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xxvii Catalog 1308242 Issued 3-03 SELECTOR GUIDE Solid State Input/Output Modules Time Delay Relays P&B P&B P&B P&B IACM OACM IDCM ODCM Features * 0.05A output rating * Slim line AC input module * Only 0.4" (10.2mm) wide package * Series operation compatible * 5A output rating * Slim line AC output module * Only 0.4" (10.2mm) wide package * Series operation compatible * 0.05A output rating * Slim line DC input module * Only 0.4" (10.2mm) wide package * Series operation compatible Approximate Dimensions 1.7" x .4" x 1.0"h (43.2 x 10.2 x 25.4h) 0.9 oz. (25.5g) 1.7" x .4" x 1.0"h (43.2 x 10.2 x 25.4h) 0.9 oz. (25.5g) 1.7" x .4" x 1.0"h (43.2 x 10.2 x 25.4h) 0.9 oz. (25.5g) Switch Arrangement 1 Form A (sinking) 1 Form A 1 Form A (sinking) 1 Form A Optical Optical Optical Optical 18-36VAC/VDC 90-140VAC/VDC 180-280VAC/VDC 5VDC 15VDC 24VDC 3-15VDC 3.3-32VDC 4-32VDC 10-60VDC 5VDC 15VDC 24VDC 3-15VDC Random Zero, Random Random Random Minimum Output Current >0 .05A >0 .01A Maximum Output Current 0.05A 3A to 5A 0.05A 3A Maximum Repeatability Minimum Output Voltage >0 24V >0 3V Precision Maximum Output Voltage 30V 280V 30V 60V Output Type DC AC DC DC Terminals Printed circuit Printed circuit Printed circuit Printed circuit Mounting Mounting board Mounting board Mounting board Mounting board 1118 1118 1118 1118 Series Coupling Input Output Switching Page Number P&B AGASTAT 3RP1 48K * 3A output rating Features * Slim line DC output module * Only 0.4" (10.2mm) wide package * Series operation compatible * 3A rating * Programmable time delay relay * Universal or fixed input voltage * Fits 35 mm DIN track * Consult factory for VDE file * 10A rating * Programmable time delay relay * Universal input voltage * LED status indicators * 1/16 DIN style enclosure 1.7" x .4" x 1.0"h Approximate (43.2 x 10.2 x 25.4h) Dimensions 0.9 oz. (25.5g) 4.02" x .886" x 3.39"h (102 x 22.5 x 86h) 5.3 oz. (150g) 1.89" x 1.89" x 2.73"h (48.0 x 48.0 x 69.3h) 5.0 oz. (142g) 1 Form C, 2 Form C 2 Form C 3A @ 250VAC 10A @ 30VDC or 120/240VAC Mode of Operation Programmable: 8 -16 timing functions or Delay On Programmable 8 functions (11-pin) 4 functions (8-pin) or Delay On Delay Time 0.05 sec. to 100 hr. 0.1 sec. to 10 hr. Type of Control Rotary switches & Potentiometer Adj. Knob & Rotary switches 1% 0.5% 0.02 sec. Tolerance 5% Overall Accuracy 1.0% 0.02 sec. -25C to +60C -25C to +60C 24-240VAC/VDC; 24VAC/VDC. 110VAC; 24VAC/VDC. 220VAC 24-240VAC; 24-125VDC; 120VAC DIN Mount Plug-in 1207 1210 Series Contact Arrang. Contact Rating Temp. Range Input Voltage Mounting Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for xxviii reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Time Delay Relays & Modules Series P&B P&B P&B AGASTAT AGASTAT P&B P&B CNT CNS CNM5 SSF SCF CN1 CG * 10A rating * Economical, programmable time delay relay * Digital accuracy * LED shows status * 1/16 DIN style enclosure * 10A rating * Programmable time delay module with replaceable relay * Universal input voltage * 10A rating * Programmable time delay relay * Slim plug-in package with mating socket * 10A rating * Economical single function (on delay) time delay relay * Digital accuracy * LED shows status * 1/16 DIN style enclosure * 10A rating * Top of the line P&B non-programmable time delay relays * Extended timing ranges 1.88" x 1.88" x 2.83"h (47.8 x 47.8 x 71.9h) 4.3 oz. (122g) 3.81" x 2.19" x 2.67"h (97 x 56 x 68h) 5.5 oz. (156g) 2.84" x 1.42" x 3.53"h (72 x 36 x 90h) 3.5 oz. (99g) 1.88" x 1.88" x 2.83"h 2.41" x 1.78" x 2.94"h (47.8 x 47.8 x 71.9h) (61.1 x 45.2 x 74.6h) 8 oz. (227g) 4.3 oz. (122g) Features * 10A rating * Programmable timer/counter * Digital display * Universal input voltage * 1/16 DIN style enclosure Approximate Dimensions 1.88" x 1.88" x 2.83"h 1.88" x 1.88" x 2.83"h (47.8 x 47.8 x 71.9h) (47.8 x 47.8 x 71.9h) 4.3 oz. (122g) 4.3 oz. (122g) * 10A rating * Programmable time delay relay * Universal input voltage * 1/16 DIN style enclosure 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 10A @ 30VDC or 277VAC 10A @ 30VDC or 277VAC 10A @ 30VDC or 277VAC 10A @ 28VDC or 120VAC 5 or 10A @ 28VDC or 120VAC 10A @ 30VDC or 277VAC 10A @ 240VAC Mode of Operation Programmable: 10 timing functions 2 counting functions Programmable: 8 functions (11-pin) 4 functions (8-pin) Programmable: 5 timing functions Programmable 4 functions Programmable 4 functions On Delay Delay on Operate Delay on Release Interval On Delay Time 0.1 sec. to 9,990 hr. 0.1 sec. to 100 min. 0.1 sec. to 9,990 hr. 0.1 sec. to 10 hr. 0.1 sec. to 10 hr. 0.1 sec. to 9,990 hr. 1 min. to 50 min. Thumbwheel switches DIP switches & Potentiometer Adj. Thumbwheel switches & Rotary switch Recessed Potentiometer Adj. Recessed dials and Potentiometer Adj. Thumbwheel switches Potentiometer Adj. Maximum Repeatability 0.1% 0.05 sec. 0.2% 0.05% 0.04 sec. 1% 0.01 sec. 1% 0.01 sec. 0.05% 0.04 sec. 0.5% (AC) 0.1% (DC) Precision Tolerance 0.1% 0.05 sec. Tolerance Min. spec. at min.; +20%, -0 at max. Tolerance 0.05% 0.04 sec. Overall Accuracy 3% 0.01 sec. Overall Accuracy 3% 0.01 sec. Tolerance 0.05% 0.04 sec. Tolerance +0, -10% at min. +10%, -0 at max. Temp. Range -10C to +55C -10C to +55C -10C to +55C -30C to +65C -30C to +65C -10C to +55C -10C to +55C Input Voltage 12VDC 24-240VAC/VDC 24-240VAC/VDC 120VAC 24-125VDC 24-240VAC or User-selectable 12-125VDC 24-240VAC 120VAC 12-24VDC 120-240VAC Plug-in Plug-in Plug-in DIN-mount or panel mount Plug-in Plug-in Plug-in 1211 1213 1215 1217 1218 1219 1220 Contact Arrang. Contact Rating Type of Control Mounting Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xxix Catalog 1308242 Issued 3-03 SELECTOR GUIDE Time Delay Relays & Modules Series P&B P&B P&B P&B P&B P&B AGASTAT CD CK CH CB CR CL/CU MD0 Features * 10A rating * Ideal for many demanding applications * Broad temperature range Approximate Dimensions 2.41" x 1.78" x 2.94"h 2.41" x 1.78" x 2.94"h (61.1 x 45.2 x 74.6h) (61.1 x 45.2 x 74.6h) 8 oz. (227g) 6 oz. (170g) * 10A rating * 10A rating * Broad line * Wide range of * Wide choice of industrial functions applications * Extremely versatile * Dependable timing cycles 2.41" x 1.78" x 2.94"h (61.1 x 45.2 x 74.6h) 6 oz. (170g) * 10A rating * Economical for volume applications * Various timing ranges * 10A rating * 10A rating * Recycle timer allows * Compact package is well-suited for independent control many OEM of ON and OFF applications delays * Various mounting * Time as low as options 0.1 sec. 2.41" x 1.78" x 2.94"h 2.41" x 1.78" x 3.56"h (61.1 x 45.2 x 74.6h) (61.1 x 45.2 x 90.4h) 6 oz. (170g) 6 oz. (170g) * 5A rating * Specification grade * Subminiature package * On-delay timer * Universal input voltage 1.53" x 1.41" x 1.91"h (38.9 x 35.7 x 48.4h) 3.5 oz. (99g) 1.05" x .85" x 2.75"h (26.7 x 21.6 x 69.8h) 4 oz. (96g) Contact Arrang. 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C, 4 Form C Contact Rating 10A @ 240VAC 10A @ 240VAC 10A @ 240VAC 10A @ 240VAC 10A @ 240VAC 10A @ 28VDC or 240VAC 5A @ 30VDC or 240VAC Mode of Operation Delay on Operate Delay on Release Delay on Operate Delay on Release Interval On Delay on Dropout Delay on Operate Delay on Release Interval On Delay on Operate Delay on Release Interval On Recycle Timer Delay on Operate On Delay Delay Time 0.1 sec. to 180 sec. 0.1 sec. to 180 sec. 1 sec. to 180 sec. 0.1 sec. to 100 min. 0.1 sec. to 180 sec. 0.1 sec. to 120 sec. 0.1 sec. to 10 hr. Type of Control Fixed, Potentiometer Adj., Ext. Res. Adj. Fixed, Potentiometer Adj., Ext. Res. Adj. Fixed, Potentiometer Adj. Potentiometer Adj. Potentiometer Adj. Fixed, Potentiometer Adj., Ext. Res. Adj. Potentiometer Adj. 1% 2% 2% 2% 2% 3% 0.5% Precision Tolerance 5% (fixed only) Tolerance Min. specified delay time or less at min,; -0, +20% at max. (knob) 5% (fixed) Tolerance 5% (fixed only) Tolerance Min. specified delay time or less at min,; -0, +30% at max. Tolerance Min. specified delay time or less at min,; -0, +20% at max. Tolerance 5%(fixed only) Overall Accuracy 1% 0.02 sec. Temp. Range -40C to +55C -10C to +55C -10C to +55C -10C to +55C -10C to +55C -10C to +40C -25C to +60C 12-110VDC 24-120VAC 12-24VDC 24-120VAC 24VDC 24-240VAC 12-24VDC 24-120VAC 24VDC 120VAC 12-24VDC 24-120VAC 12-125VDC 24-240VAC Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in 1222 1224 1226 1228 1230 1231 1233 Maximum Repeatability Input Voltage Mounting Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xxx Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Time Delay Relays & Modules Series Features AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT SSC SCB/SCC STA SRC SST SCE VTM-1 VTM1 * 10A rating * Specification grade * Choose from 13 different timing ranges * 10A rating * Specification grade * Choose from 13 different timing ranges * Premium components * 10A rating * Specification grade * Choose from 13 different timing ranges * LED indicators * Space-saving quick connect plug-in terminals * 10A rating * Specification grade * Repeat cycle timer * Choose from 13 different timing ranges * Premium components * 10A rating * Industrial grade * Wide choice of functions * 9 different timing ranges * 10A rating * Specification grade * True Off Delay * 6 different timing ranges * 1A rating * Specification grade * In-line timing module * Solid state output switch * Universal input voltage * 1A rating * On Delay timing module * Solid state output switch * External Res. adjustable Approximate 1.97" x 1.97" x 3.25"h 1.97" x 1.97" x 3.25"h 1.5" x 1.39" x 3.045"h 1.97" x 1.97" x 3.25"h 2.0" x 2.0" x 3.2"h 1.97" x 1.97" x 3.25"h 2.13" x 2.65" x 0.76"h 2.0" x 2.0" x 1.25"h (50.8 x 50.8 x 31.8h) (54 x 67 x 19h) (50 x 50 x 83h) Dimensions (50.8 x 50.8 x 81.3h) (50 x 50 x 83h) (50 x 50 x 83h) (50 x 50 x 83h) (38 x 35 x 77h) 3 oz. (84g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 5.3 oz. (149g) 4.2 oz. (119g) Contact. Arrang. 2 Form C 2 Form C 2 Form C 2 Form C Contact Rating 10A @ 28VDC or 120VAC 10A @ 28VDC or 120VAC 10A @ 28VDC or 120VAC 10A @ 28VDC or 120VAC Mode of Operation On Delay Off Delay Interval On Delay Off Delay Interval On Delay Off Delay Interval Accum. On Delay Repeat Cycle Delay Time 0.1 sec. to 10 hr. 0.1 sec. to 10 hr. 0.1 sec. to 10 hr. Type of Control 1 Form C, 2 Form C 1 Form A 1 Form A 10A @ 120/240VAC 10A @ 120/240VAC 1A @ 240VAC/VDC (1 pole) or 5A @ 120/240VAC On Delay, Off Delay, Interval, One Shot, Repeat Cycle True Off Delay 1A @ 240VAC/VDC On Delay On Delay 0.1 sec. to 60 min. 0.1 sec. to 120 min. 0.1 sec. to 10 min. 1 sec. to 1,000 sec. 0.5 sec. to 60 min. Potentiometer Adj. Fixed, Potentiometer Adj., Ext. Res. Adj. Ext. Res. Adj. 1% 0.004 sec. 1% 1% 2% 1% Fixed, Fixed, Potentiometer Adj. Fixed, Potentiometer Adj., Potentiometer Adj., Potentiometer Adj., Ext. Res. Adj. Ext. Res. Adj. Ext. Res. Adj. Maximum Repeatability 1% 0.004 sec. Precision Overall Accuracy 5.25% Overall Accuracy 2% Overall Accuracy 2% Overall Accuracy 2.25% Overall Accuracy 5% Overall Accuracy 5% Overall Accuracy 2% Overall Accuracy 2% at R = 1 megohm -30C to +65C -30C to +65C (SCB) -30C to +65C -30C to +65C -23C to +54C -30C to +65C -30C to +65C -40C to +65C 12-120VDC 24-240VAC 12-120VDC 24-240VAC 12-120VDC 24-240VAC 12-120VDC 24-240VAC 12-120VDC 24-120VAC 24-125VDC 24-120VAC 24-240 VAC/VDC or 12VDC 12-120VAC/VDC Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in Panel mount Panel Mount 1234 1235 1236 1237 1238 1239 1240 1241 Temp. Range Input Voltage Mounting Page Number 0.5% 0.004 sec. 0.5% 0.004 sec. 2 Form C Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. xxxi Catalog 1308242 Issued 3-03 SELECTOR GUIDE Time Delay Relays & Modules AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT VTMA1 VTMR1 VTM2 VTM3 VTM4 VTM7 7000 2100 Features * 1A rating * On Delay timing module * Solid state output switch * Internal potentiometer * 8A rating * On Delay timing module * Electromechanical relay output * Internal potentiometer * 1A rating * Off Delay timing module * Solid state output switch * External Res. adjustable * 1A rating * Interval timing module * Solid state output switch * External Res. adjustable * 1A rating * One Shot timing module * Solid state output switch * External Res. adjustable * 1A rating * Repeat cycle timing module * Independently adjustable on and off times * Solid state output switch * External Res. adjustable * 20A rating * Electropneumatic time delay relay * Calibrated timing head * Front terminals * Optional auxiliary switches * Many options * 10A rating * Miniature electropneumatic time delay relay * Knob or key adj. * Hermetically sealed, high shock and vibration option Approximate Dimensions 2.0" x 2.0" x 1.25"h 4.52" x 2.57" x 2.83"h 1.52" x 1.52" x 4.26"h 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) (114.8 x 65.3 x 71.9h) (38.6 x 38.6 x 108.2h) 17 oz. (482g) 36 oz. (1.02kg) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) Series 1 Form A 2 Form C 2 Form C, 4 Form C Contact. Arrang. 1 Form A 1 Form C Contact Rating 1A @ 240VAC/VDC 8A @ 120VAC Mode of Operation On Delay On Delay Off Delay Interval One Shot (Latching Interval) Repeat Cycle On Delay, Off Delay, On Delay-Off Delay On Delay, Off Delay Delay Time 0.5 sec. to 60 min. 15 to 300 sec. 0.5 sec. to 60 min. 0.5 sec. to 60 min. 0.5 sec. to 60 min. 0.5 sec. to 60 min. 0.1 sec. to 60 min. 0.03 to 180 sec. Type of Control Potentiometer Adj. Potentiometer Adj. Ext. Res. Adj. Ext. Res. Adj. Ext. Res. Adj. Ext. Res. Adj. Knob Knob 5% 5% 1% 1% 1% 1% 5-15% (model & delay dependent) 5-8% (temp. dependent) Overall Accuracy 2% at R = 1 megohm Overall Accuracy 2% at R = 1 megohm Overall Accuracy 2% at R = 1 megohm Overall Accuracy 2% at R = 1 megohm -- -- Maximum Repeatability Precision Overall Accuracy Overall Accuracy -0%,+10% at Max. -0%,+10% at Max. -30%,+10% at Min. -30%,+10% at Min. 1 Form A 1 Form A 1 Form A 1A @ 240VAC/VDC 1A @ 240VAC/VDC 1A @ 240VAC/VDC 1A @ 240VAC/VDC 20A @ 120/240VAC 15A @ 30VDC 10A @ 120VAC or 30VDC Temp. Range -40C to +65C -40C to +65C -40C to +65C -40C to +65C -40C to +65C -40C to +65C -29C to +74C -55C to +85C Input Voltage 24-240VAC/VDC 120VAC 12-120VAC/VDC 12-120VAC/VDC 12-120VAC/VDC 12-120VAC/VDC 12-550VAC 28-550VDC 120-240VAC 12-125VDC Panel Mount Panel Mount Panel Mount Panel Mount Panel Mount Panel Mount Panel Mount Panel Mount 1242 1243 1244 1245 1246 1247 1248 1254 Mounting Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. xxxii Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Sensors, Monitors & Protective Relays Series P&B AGASTAT AGASTAT CS VCA VMA AGASTAT P&B PMA/PMB SDAS-01 KILOVAC KILOVAC WD25 WD2759 Features * Single phase * Single phase * Single phase voltage sensor undervoltage undervoltage * Functions as either relay relay an overvoltage or * Fixed pick-up and * Fixed pick-up and an undervoltage internal internal sensor potentiometer potentiometer * Choice of fixed adjustable drop-out adjustable drop-out pick-up and knob * Compact design * Locking adjustable drop-out potentiometer or knob adjustable pick-up and dropout * Three phase power quality monitor * Monitors voltage, phase imbalance, phase sequence, phase loss. * Start-up delay and locking potentiometer options. * Single phase current sensor * AC current sensor is offered in both overcurrent and undercurrent types * Inductive coupling to power line * Potentiometer adjustable Approximate Dimensions 2.41" x 1.78" x 2.94"h (61.1 x 42.2 x 76.6h) 8 oz. (227g) 2.0" x 2.0" x 1.25"h (50.8 x 50.8 x 31.8h) 3.2 oz. (90.7g) 1.94" x 1.94" x 3.25"h (49 x 49 x 83h) 6 oz. (168g) 3.85" x 2.18" x 5.31"h (98 x 55 x 135h) 24 oz. (625g) 1.53" x 1.41" x 2.72"h 2.95" x 2.87" x 4.41"h (75 x 73 x 112h) (38.9 x 35.7 x 70.6h) 14.4 oz. (400g) 3.2 oz. (90g) Contact / Switch Arrangement 2 Form C 1 Form C 2 Form C 1 Form A + 1 Form C 2 Form C 2 Form C 1 Form C for undervoltage and 1 Form C for overvoltage Contact / Switch Rating 10A @ 28VDC or 120VAC 7A @ 250VAC 3A @ 30VDC 7A @ 250VAC 3A @ 30VDC 8A @ 250VAC 3A @ 30VDC 2A @ 28VDC or 1A @ 120VAC 5A @ 120VAC or 30VDC 5A @ 120VAC or 30VDC 15 to 240VAC or VDC in various ranges 110 to 600VAC in various ranges 1.5 to 15A AC 120 to 480VAC, nominal 575VAC, Max. 40-400 Hz. 120 to 480VAC, nominal 700VAC, Max. 50-400 Hz. -10C to +55C -10C to +60C Monitor / Sense Range or Threshold Temperature Range Terminals Mounting Options Sockets Page Number 16 to 140VAC or VDC 120VAC or 240VAC, in various ranges nominal -10C to +55C Octal plug -23C to +55C Octal plug Quick Connect Screws -25C to +70C * Paralleling (snych * Overvoltage/ check) relay undervoltage * Checks synchroniza- relay tion of two circuits * User adjustable for voltage, phase sensing voltages, relationship and number of phases, frequency over and under* Adjustable setpoints voltage setpoints, * Single dead bus, and time delays. double dead bus and generator to generator types -40C to +60C 2.95" x 2.87" x 4.41"h (75 x 73 x 112h) 14.4 oz. (400g) -40C to +60C Quick connect Screws Screws Socket Panel Socket DIN-rail, Panel or Machine Tool Rail (with optional adapter plate) Socket DIN-rail or Panel DIN-rail or Panel Screw terminal -- Screw terminal -- Screw terminal, Solder terminal, PC terminal, Quick connect terminal -- -- 1302 1303 1304 1305 1307 1308-1309 1308 & 1310 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: xxxiii Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Sensors, Monitors & Protective Relays Series Features Approximate Dimensions KILOVAC KILOVAC KILOVAC KILOVAC WD32 WD47 WD5051 WD81OU * Over/ * Reverse power * Phase sequence * One and three phase overcurrent underfrequency relay relay relay relay * Monitors the * Monitors the * Nominal sensing * User selectable direction of power correct phase current, instantanominal frequency, from AC generators rotation and loss of neous over current underfrequency * Adjustable trip set phase. (IOC) setpoint, time (UF) trip set, and time delay * No adjustments or over current (TOC) overfrequency (OF) calibration setpoint and time trip set, UF time necessary. overcurrent time delay and OF time delay are user delay. configured. 2.95" x 2.87" x 4.41"h 2.95" x 2.87" x 4.41"h (75 x 73 x 112h) (75 x 73 x 112h) 14.4 oz. (400g) 14.4 oz. (400g) 2.95" x 2.87" x 4.41"h (75 x 73 x 112h) 14.4 oz. (400g) 2.95" x 2.87" x 4.41"h (75 x 73 x 112h) 14.4 oz. (400g) Contact / Switch Arrangement 2 Form C 2 Form C 1 Form C for IOC and 1 Form C for TOC 1 Form C for UF and 1 Form C for OF Contact / Switch Rating 5A @ 120VAC or 30VDC 5A @ 120VAC or 30VDC 5A @ 120VAC or 30VDC 5A @ 120VAC or 30VDC Monitor / Sense Range or Threshold 120 to 480VAC, nominal 575VAC, Max. 40-400 Hz. 5A, nominal 120 to 480VAC, nominal 575VAC, Max. 50-400 Hz. 1, 3, 6 or 8A 40-400 Hz. 50, 60 or 400 Hz., nominal 1000 Hz.,Max. 20 to 480VAC, 575VAC, Max. Temperature Range Terminals Mounting Options Sockets Page Number -40C to +60C -40C to +60C -40C to +60C -40C to +60C Screws Screws Screws Screws DIN-rail or Panel DIN-rail or Panel DIN-rail or Panel DIN-rail or Panel -- -- -- -- 1308 & 1311 1308 & 1312 1308 & 1313 1308 & 1314 Need Protective Relays in Steel Cases? Our steel-cased protective relays are not desribed in this technical databook as they do not represent the most cost-effective solution for many design requirements. While the plastic-cased WD... series products are more appropriate for many new industrial applications, we still offer our steelcased protective relays. For details on KILOVAC steel-cased protective relays, consult technical support (see inside back cover) or visit our website at www.tycoelectronics.com. Looking for high performance relay products? Our KILOVAC high voltage relays; HARTMAN and KILOVAC high performance power relays, sensors and contactors; and CII high performance signal level relays, timers, sensors and solenoids are not described in detail in this technical databook. We have included an overview of those product lines in section 14 beginning on page 1401. For detailed information on our broad high performance relay product line, consult technical support (see inside back cover) or visit our website at www.tycoelectronics.com. Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for xxxiv reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 CIRCUIT BREAKERS Alphanumeric Index Series Type Page W6 ............................. Magnetic Circuit Breaker .................. 119 Circuit Breakers ...................... 101-124 1 Transformers...................................... 5-18 2 Low-signal PC Board Relays .......... 5-18 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Relays with Forcibly-Guided Contacts.............. 36-79 6 Plug-in/Panel Mount General Purpose Relays................ 80-88 7 Power Relays & Definite Purpose Contactors...................... 89-131 8 Latching, Impulse & Rotary Relays ............................... 149-154 9 Automotive Relays ...................... 141-148 10 Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 W9 ............................. Magnetic Circuit Breaker .................. 119 W23 ........................... Thermal Circuit Breaker .................... 116 W28 ........................... Thermal Circuit Breaker .................... 110 W31 ........................... Thermal Circuit Breaker .................... 116 W33 ........................... Thermal Circuit Breaker .................... 114 W51 ........................... Thermal Circuit Breaker .................... 112 W54 ........................... Thermal Circuit Breaker .................... 105 W57 ........................... Thermal Circuit Breaker .................... 103 W58 ........................... Thermal Circuit Breaker .................... 107 NOTE: A question tree that may help you in selecting an appropriate circuit breaker for your application can be found on the next page. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 101 Refer to inside back cover. Catalog 1308242 Issued 3-03 CIRCUIT BREAKERS P&B Circuit Breaker Question Tree This guide helps the user select one or more circuit breaker series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a breaker for a particular application. What general type of breaker do you need? Thermal Circuit Breaker Magnetic Circuit Breaker * Typically less expensive * Trip point varies with ambient temperature * One-pole and two-pole models are offered. * Typically more expensive * Temperature stable over a wide range * Available with different time delays before tripping * One through four poles. Pushbutton Actuator W23 Series Push-pull actuation for manual on/off and reset. One pole. Screw terminals. W28 Series (-X version) Push-to-reset actuation. Compact unit can replace slow-blow glass cartridge fuse and holder. One pole. Quick connect terminals. W54 Series Push-to-reset actuation. One pole. Quick connect, PC board or screw terminals. W57 Series Push-to-reset actuation. Compact size. One pole. Quick connect or PC board terminals. Compact size W6 Series Toggle actuator standard, rocker optional. Quick connect or screw terminals. Standard size W9 Series Toggle actuation. Stud terminals. W58 Series Push-to-reset actuation. One pole. Quick connect or screw terminals. Toggle Actuator W31 Series Toggle actuation for manual on/off and reset. One pole. Screw terminals. Rocker Actuator W28 Series (-S version) Rocker actuation for manual on/off and reset. Compact unit can replace slow-blow glass cartridge fuse and holder. One pole. Quick connect terminals. W33 Series Rocker actuation for manual on/off and reset. One or two pole. Optional indicator lamp. Quick connect terminals. W51 Series Rocker actuation for manual on/off and reset. One pole. Optional indicator lamp. Quick connect or PC board terminals. 102 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W57 series Compact, Push To Reset Only Thermal Circuit Breaker Interrupt Capacity: 1,000 amps in accordance with UL standard 1077. Resettable Overload Capacity: Ten times rated current. Reset Time: 60 seconds. Features * New, compact, design. * 4 to 20 amp ratings. * Cannot be manually tripped. * Button extends for visual trip indication. * Push button to reset breaker. * Numerous mounting and termination options. Typical Resistance vs. Current Rating @ +25C Agency Approvals W57 series is UL 1077 Recognized as Supplementary Protectors, File E69543, for Canada and the United States. Current Rating in Amps Typical Resistance in Ohms Current Rating in Amps Typical Resistance in Ohms 4.0 5.0 6.0 7.0 8.0 0.062 0.050 0.042 0.036 0.031 10.0 12.0 15.0 20.0 0.025 0.021 0.017 0.012 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also sek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ 25C Calibration: Will continuously carry 100% of rating. May trip between 101% and 134%, but must trip at 135% of rating within one hour at +25C. Dielectric Strength: 1,500VAC (60 seconds). Insulation Resistance: 100 megohms. Maximum Operating Voltages: 50VDC; 250VAC, 50/60 Hz. Mechanical/Environmental Data Operating Temperature Range: 0C to +60C. Termination: .250" (6.35mm) quick connects. Mounting: Various options. See Ordering Information and drawings. Approximate Weight: 0.5 oz. (14.3g). Outline Dimensions Time vs. Current Trip Curve @ +25C 1000 Overload 100% 135% 200% 300% 400% 500% 600% 900 Load Current As A Percent Of Breaker Rating 800 700 600 .465 (11.8) Trip Times No Trip Trip in 1 hour 4.0 - 40.0 Sec. 1.2 - 12.0 Sec. 0.6 - 5.0 Sec. 0.4 - 2.8 Sec. 0.3 - 1.8 Sec. .889 (22.6) .303 (7.7) 1.15 .689 (29.2) (17.5) 500 SEE TERMINAL DRAWINGS FOR DETAIL .031 .102 (.8) (2.6) 400 .457 (11.6) SEE MOUNTING BUSHING AND MOUNTING HARDWARE DRAWINGS FOR DETAIL 300 .575 (14.6) 200 135 100 0 .1 1 10 100 Time In Seconds 1000 10,000 Optional Protective Boot Silicone rubber boot is bonded to integral alumimum nut. Ambient Compensation Table Ambient Temperature in C 10 20 25 30 40 50 60 Dimensions are shown for reference purposes only. 1-1423696-5 Black boot for W57 with 3/8"-24 bushing. .63 DIA. (16.0) Rating Correction Factor 3-6A Models 7-20A Models .80 .90 1.00 1.10 1.25 1.61 2.15 .80 .90 1.00 1.05 1.15 1.25 1.40 To use this chart: Divide the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Do not use these devices outside their specified operating temperature ranges. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. .622 (15.8) 1-1423696-7 Clear boot for W57 with 3/8"-24 bushing. 1-1423696-4 Black boot for W57 with M11 X 1.0 bushing. .70 DIA. (17.8) .799 (20.3) 1-1423696-6 Clear boot for W57 with M11 X 1.0 bushing. www.tycoelectronics.com Technical support: Refer to inside back cover. 103 Catalog 1308242 Issued 3-03 P&B Ordering Information B Typical Part No. W 57 -X B 1 A 4 A 1 0 -4 1. Designator: W = Circuit breaker 2. Series Number: 57 = Compact, Single Pole, Push-to-Reset, Thermal Model 3. Circuit Function: X = Series Trip 4. Button: A = White, plain, no rate marking C = White with black rate marking (vertical) B = White with red rate marking (vertical) 5. Mounting Bushing: 1 = 9.8mm x 9.6mm long, plastic 2 = 3/8" (one side flat) x 10.5mm) long, plastic 6 = 3/8" (one side flat) x 10.5mm) long, metal 7 = 10.8mm x 12.6mm long, metal 6. Terminals: A = Quick connect .250" (6.35mm) straight 7. Mounting Hardware: 4 = Metal knurled nut/hex nut 5 = Plastic knurled nut 8. Mounting Hardware Packaging: A = Assembled to bushing 12 = Metal knurled nut B = Bulk unassembled 99 = None C = No mounting hardware. 9. Maximum Operating Voltage (AC): 1 = 250VAC 10. Nameplate: 0 = None 11. Specify Amp Rating: 4 5 6 7 8 10 12 15 20 Our authorized distributors are more likely to stock the following items for immediate delivery. W57-XB1A4A10-5 W57-XB1A4A10-10 W57-XB1A4A10-15 W57-XB1A4A10-20 W57-XB1A7A10-5 W57-XB1A7A10-10 W57-XB1A7A10-15 W57-XB1A7A10-20 ORDERING NOTE: Many options illustrated below are not listed in the "Ordering Information" chart above. Options denoted by "Special" or "Special Order" in their descriptions are only offered on a special order basis. Additionally, mounting hardware can be ordered separately. These options are subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding these options. Mounting Bushings and Recommended Panel Cutouts .346 (8.8) .441+.008, -.0 (11.2+.2, -.0) .059 (1.5) .059 (1.5) .346 +.008, -.0 (8.8 +.2, -.0) .394+.008, -.0 (10.0+.2, -.0) .386 (9.8) .413 (10.5) .382 +.008, -.0 (9.7 +.2, -.0) .378 (9.6) Standard Option 2 & 6 - 3/8" - 24UNF Thread .441+.008, -.0 (11.2+.2, -.0) .059 (1.5) .303 (7.7) .378 (9.6) Standard Option 7 - M12 X 1.0 Thread .630.005 (16.13) .382 +.008, -.0 (9.7 +.2, -.0) .059 (1.5) .394+.008, -.0 (10.0+.2, -.0) .386 (9.8) .433 +.008, -.0 (11.0 +.2, -.0) .378 (9.6) .413 (10.5) Standard Option 1 - M11 X 1.0 Thread .480 +.008, -.0 (12.2 +.2, -.0) .059 (1.5) .543.005 (13.8.13) .311 +.008, -.0 (7.9 +.2, -.0) .413 (10.5) Special Order - M11 X 1.0 Thread Special Order - Snap In Option Special Order - 3/8" - 24UNF Thread Termination Options .154 .01 (3.9 0.3) .126 (3.2) Standard .250 QC Straight Special .250 QC 45 Special .250 QC 90 .126 (3.2) Special .250 QC/PCB 270 .098 .01 (2.5 0.3) .181 (4.6) Special .250 QC 90 Special .250 QC/PCB 270 .551 DIA. (14.0) Special .250 QC Straight (small hole) Optional Nameplates Mounting Hardware Options .590 DIA. (15.0) .181 (4.6) .071 (1.8) DIA. .740 DIA. (18.8) .740 DIA. (18.8) .854 DIA. (21.7) .945 DIA. (24.0) .016 (.4) THICK .016 (.4) THICK Special Embossed Aluminum Special Silver Printing On Black 2 X .059 DIA. (1.5) 84 .102 (2.6) .079 (2.0) .126 (3.2) Standard Knurled Nut Standard Hex Nut Special Integrated Knurled Nut Dimensions are shown for 104 reference purposes only. 56 .126 (3.2) Special Integrated Knurled Nut with Small Holes Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W54 series Push To Reset Only Thermal Circuit Breaker Features * New design. * 5 to 40 amp ratings. (35A and 40A models will not be submitted for UL). * Cannot be manually tripped. * Button extends for visual trip indication. * Push button to reset breaker. * Numerous mounting and termination options. Interrupt Capacity: 1,000 amps in accordance with UL standard 1077. Resettable Overload Capacity: Ten times rated current. Reset Time: 60 seconds. Typical Resistance vs. Current Rating @25C Agency Approvals Current Rating in Amps Typical Resistance in Ohms Current Rating in Amps Typical Resistance in Ohms 5.0 6.0 7.0 8.0 10.0 12.0 0.050 0.042 0.036 0.031 0.025 0.021 15.0 20.0 25.0 30.0 35.0 40.0 0.017 0.012 0.010 0.008 0.007 0.006 W54 series (except 35A and 40A models) is UL 1077 Recognized as Supplementary Protectors, File E69543, for Canada and the United States. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ 25C Calibration: Will continuously carry 100% of rating. May trip between 101% and 134%, but must trip at 135% of rating within one hour at +25C. Dielectric Strength: 1,500VAC (60 seconds). Insulation Resistance: 100 megohms. Maximum Operating Voltages: 50VDC; 250VAC . Mechanical/Environmental Data Operating Temperature Range: 0C to +60C. Termination: .250" (6.35mm) quick connects or #8-32 screws. Mounting: Various options. See Ordering Information and drawings. Approximate Weight: 0.9 oz. (25.0g). Time vs. Current Trip Curve @ +25C Outline Dimensions 1000 Overload Trip Times 100% No Trip 135% Trip in 1 hour 200% 5.0 - 30.0 Sec. 300% 1.8 - 7.6 Sec. 400% 1.0 - 4.5 Sec. 500% 0.6 - 3.0 Sec. 600% 0.4 - 2.2 Sec. 900 Load Current As A Percent Of Breaker Rating 800 700 600 .118 DIA (3.0) 1.378 (35.0) .465 (11.8) 1.22 (31.0) .303 (7.7) .846 (21.5) 500 SEE TERMINAL DRAWINGS FOR DETAIL .031 .102 (.8) (2.6) 400 300 .638 (16.2) SEE MOUNTING BUSHING AND MOUNTING HARDWARE DRAWINGS FOR DETAIL .575 (14.6) 200 135 100 0 .1 1 10 100 1000 10,000 Time In Seconds Optional Protective Boot Silicone rubber boot is bonded to integral alumimum nut. Ambient Compensation Table Ambient Temperature in C 10 20 25 30 40 50 60 Dimensions are shown for reference purposes only. 1-1423696-5 Black boot for W54 with 3/8"-24 bushing. .63 DIA. (16.0) Rating Correction Factor 4-8A Models 9-30A Models .90 .98 1.00 1.10 1.25 1.61 2.00 .80 .90 1.00 1.05 1.15 1.31 1.55 To use this chart: Divide the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Do not use these devices outside their specified operating temperature ranges. Dimensions are in inches over (millimeters) unless otherwise specified. .622 (15.8) 1-1423696-4 Black boot for W54 with M11 X 1.0 bushing. .70 DIA. (17.8) .799 (20.3) Specifications and availability subject to change. 1-1423696-7 Clear boot for W54 with 3/8"-24 bushing. 1-1423696-6 Clear boot for W54 with M11 X 1.0 bushing. www.tycoelectronics.com Technical support: Refer to inside back cover. 105 Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 54 -X B 1 A 4 A 1 0 -5 1. Designator: W = Circuit breaker 2. Series Number: 54 = Single Pole, Push-to-Reset, Thermal Model 3. Circuit Function: X = Series Trip 4. Button: A = White, plain, no rate marking C = White with black rate marking (vertical) B = White with red rate marking (vertical) 5. Mounting Bushing: 1 = 9.8mm x 12.6mm long, metal 2 = 3/8" (one side flat) x 10mm) long, metal 4 = 10.8mm x 12.6mm long, metal 7 = 3/8" (one side flat) x 10mm) long, plastic 6. Terminals: A = Quick connect .250" (6.35mm) straight C = #8-32 screw 90 (screws installed) 7. Mounting Hardware: 4 = Metal knurled nut/hex nut 5 = Plastic knurled nut 8. Mounting Hardware Packaging: A = Assembled to bushing 12 = Metal knurled nut B = Bulk unassembled 99 = None C = No mounting hardware 9. Maximum AC Operating Voltage: 1 = 250VAC 10. Nameplate: 0 = None 11. Specify Amp Rating: 5 7 10 6 8 12 15 20 25 30 35* 40* *Not UL Our authorized distributors are more likely to stock the following items for immediate delivery. W54-XB1A4A10-20 W54-XB1A4A10-25 W54-XB1A4A10-30 W54-XB1A4A10-5 W54-XB1A4A10-10 W54-XB1A4A10-15 Mounting Bushings and Recommended Panel Cutouts .346 (8.8) .441+.008, -.0 (11.2+.2, -.0) .059 (1.5) .346 +.008, -.0 (8.8 +.2, -.0) .059 (1.5) .394 (10.0) .496 (12.6) Standard Option 2 & 7 - 3/8" - 24UNF Thread Standard Option 1 - M11 X 1.0 Thread .441+.008, -.0 (11.2+.2, -.0) .157 (4.0) .433 +.008, -.0 (11.0 +.2, -.0) .413 (10.5) .496 (12.6) .496 (12.6) Standard Option 4 - M12 X 1.0 Thread Special Order - M11 X 1.0 Thread Termination Options Optional Nameplates .098 .01 (2.5 0.3) .181 (4.6) Special .250 QC 45 Special .250 QC 90 .551 DIA. (14.0) Special Special Standard .250 QC/PCB #8-32 Screw #8-32 Screw 270 45 90 .740 DIA. (18.8) .740 DIA. (18.8) 2 X .059 DIA. (1.5) 84 .102 (2.6) .079 (2.0) .126 (3.2) Standard Knurled Nut Standard Hex Nut Special Integrated Knurled Nut Dimensions are shown for 106 reference purposes only. .854 DIA. (21.7) .945 DIA. (24.0) .016 (.4) THICK .016 (.4) THICK Special Embossed Aluminum Special Silver Printing On Black .181 (4.6) Mounting Hardware Options .590 DIA. (15.0) Special Order - Snap In Option .480 +.008, -.0 (12.2 +.2, -.0) .157 (4.0) .394+.008, -.0 (10.0+.2, -.0) .386 (9.8) Standard .250 QC Straight .543.005 (13.8.13) .382 +.008, -.0 (9.7 +.2, -.0) .394+.008, -.0 (10.0+.2, -.0) .386 (9.8) .630.005 (16.13) 56 .126 (3.2) Special Integrated Knurled Nut with Small Holes Dimensions are in inches over (millimeters) unless otherwise specified. ORDERING NOTE: Many options illustrated here are not listed in the "Ordering Information" chart above. Options denoted by "Special" or "Special Order" in their descriptions are only offered on a special order basis. Additionally, mounting hardware can be ordered separately. These options are subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding these options. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W58 series Push To Reset Only Thermal Circuit Breaker Maximum Resistance vs. Current Rating @ +25C Features * 0.5 amp to 30 amp ratings. * Cannot be manually tripped. * Button extends for visual trip indication. * Push button to reset breaker. * Termination is screw or .250" QC. Current Rating in Amps 0.5 1 2 3 4 5 6 7 Agency Approvals W58 Series is UL 1077 Recognized as Supplementary Protectors, File E69543, and CSA Certified as Appliance Component Protectors, File LR15734. Maximum Resistance in Ohms 5.0 1.35 0.32 0.18 0.10 0.026 0.026 0.020 Current Rating in Amps 8 9 10 12 15 20 25 30* Maximum Resistance in Ohms 0.020 0.020 0.014 0.010 0.010 0.005 0.006 0.004 *No UL/CSA Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ +25C Mechanical/Environmental Data Calibration: Breaker will continuously carry 100% of rated load. It may trip between 101% and 145% of rated load, but must trip at 145% at 25C. Dielectric Strength: Over 1,500 volts RMS. Maximum Operating Voltages: 50VDC; 250VAC. Interrupt Capacity: 2,000 amps at 50VDC (0.5 - 30 amp models). 1,000 amps at 250VAC (0.5 - 30 amp models). Note: 30 0amp model not UL or CSA. Resettable Overload Capacity: Ten times rated current. Shock: Withstands to 10g. Endurance Cycling: Over 1,000 cycles at 200% of rated load. Vibration: Withstands to 10g at 10-55 Hz. Weight: Less than 1 1/2 oz. (42.5g). Time vs. Current Trip Curve @ +25C Ambient Compensation Chart 1000 Overload 800 Load Current As A Percent Of Breaker Rating 100% 145% 200% 400% 600% 800% 1000% (A) 700 600 Trip Times Overload 100% 145% 200% 400% 600% 800% 1000% No Trip Trip in 1 hour 6.0-30 Sec. 1.6-4.5 Sec. 0.60-1.7 Sec. 0.25-0.90 Sec. 0.15-0.65 Sec. 1.40 (B) All 1-4 Amp Models Trip Times 1.30 No Trip Trip in 1 hour 10-45 Sec. 3.0-14.0 Sec. 1.4-7.0 Sec. 0.75-4.3 Sec. 0.50-3.4 Sec. 500 Correction Factor (A) All 5-30 Amp Models 900 (B) 400 1.20 1.10 1.00 0.90 0.80 0.70 300 0.60 -20 -10 0 10 20 30 40 50 60 200 Ambient Temperature In Degrees Centigrade (C) 100 0 .1 1 10 Time In Seconds Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 100 1000 To use this chart: Read up from the ambient temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 107 Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 58 -X B 1 A 4 A -5 1. Designator: W = Circuit breaker 2. Series Number: 58 = Single Pole, Push-to-Reset 3. Circuit Function: X = Series Trip 4. Button: A = White, plain, no rate marking, no trip band B = White with red rate marking, red trip band C = White with black rate marking, red trip band E = White with red rate marking no trip band F = White with black rate marking, no trip band 5. Mounting Bushing: 1 = 7/16" x .500" (12.70mm) long 4 = 15/32" x .300" (7.62mm) long, black 6 = 3/8" x .465" (11.81mm) long, round 6. Terminals: A = Quick connect .250" (6.35mm) straight C = 6/32 screw 90 (screws installed) D = 6/32 screw 90 (screws bulk packed) 7. Mounting Hardware: 4 = Knurled nut/hex nut 6 = Knurled nut/hex nut/lock washer 12 = Knurled nut/lock washer 15 = Two hex nuts/lock washer 99 = No mtg. hardware supplied (Use C, Step #8) Note: For other hardware combinations, order separately. See mounting hardware Ordering Information table. 8. Mounting Hardware Packaging: A = Assembled to bushing B = Bulk unassembled C = No mounting hardware 9. Specify Amp Rating: 0.5 3 6 1 4 7 2 5 8 9 10 12 15 20 25 30* *Not UL or CSA Stock Items - Authorized distributors are more likely to stock the following items. W58-XB1A4A-1 W58-XB1A4A-2 W58-XB1A4A-3 W58-XB1A4A-4 W58-XB1A4A-5 W58-XB1A4A-6 W58-XB1A4A-7 W58-XB1A4A-8 W58-XB1A4A-10 W58-XB1A4A-12 W58-XB1A4A-15 W58-XB1A4A-20 W58-XB1A4A-25 W58-XB1A4A-30 W58-XC4C12A-1 W58-XC4C12A-2 W58-XC4C12A-3 W58-XC4C12A-5 W58-XC4C12A-7 W58-XC4C12A-10 W58-XC4C12A-15 W58-XC4C12A-20 W58-XC4C12A-25 W58-XC4C12A-30 Outline Dimensions Terminal Options .440 (11.18) .425 .850 (10.80) (21.59) 1.375 (34.93) .250 (6.35) x .032 (.81) QUICK CONNECT TERMINALS .050 MAX. (1.27) CLOSED POSITION .415 (10.54) CODES 1 & 4 .312.005 (7.92.13) 1.375 (34.93) 15 .250 (6.35) CODE 6 SEE TERMINAL DRAWINGS SEE MOUNTING FOR DETAIL BUSHING AND MOUNTING HARDWARE DRAWINGS FOR DETAIL .660 (16.76) Dimensions are shown for 108 reference purposes only. 1.375 (34.93) .850 (21.59) A Dimensions are in inches over (millimeters) unless otherwise specified. .440 (11.18) .187 (4.75) .281 MAX. (7.14) OPEN POSITION BUTTON .425 (10.80) .312 TYP. (7.92) C&D .156 .85 (3.96) (21.6) #6-32 SCREW & LOCK WASHER ASSEMBLY Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Mounting Hardware Disc Knurled Nut Hex Nut Pal Nut Lockwasher ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS STRAIGHT KNURL 24 PITCH IT BREAK CU ER CIR BLACK ETCHED LETTERS .078 (1.98) HIGH, BOLD FACE PR ES FLAT A A ET A S TO RES .937 (23.80) .013 (.33) B A B Mounting Bushing B B Mounting Hardware Dimensions Type 1 Recommended Cutout .440 - .450 DIA. (17.3 - 17.7) 7/16-28 THREAD (SILVER) A. B. Dim. Hex. Knurled L/W Pal 3/8" .556 .562 .562 .562 7/16" .625 .625 .540 .625 15/32" .556 .625 .600 .625 3/8" .085 .078 .018 .140 7/16" .078 .125 .022 .111 15/32" .078 .125 .018 .090 Type 4 .300 (7.62) Mounting Hardware Ordering Information .470 - .480 DIA. (18.5 - 18.9) 15/32-32 THREAD (BLACK) Type 6 Mounting Bushing Code Knurl Nut Hex Nut Pal Nut Washer Push to Reset Disc 1 55-010A 55-011A 16S086B 88-021B 33-012A 4 * 55-001B 16S086C 88-002A 33-012C 6 55-008A 55-001D 16S086A 88-006K 33-012B * 55-010B (silver) 55-010E (black) .465 (11.81) .370 - .380 DIA. (15.0 - 15.3) 3/8-24 THREAD (SILVER) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 109 ;; ;; Catalog 1308242 Issued 3-03 P&B W28 series Switchable or Push to Reset Fuseholder-Type Thermal Circuit Breaker Note: VDE, Demko, Semko not available on 16A and 20A W28 only. Push-to-Reset Breaker Switch/Breaker Features Resettable Overload Capacity: Six times rated current for 0.25 through 2 amp models. Ten times rated current for 3 through 20 amp models. Reset Time: 180 seconds max. for 0.25 through 2 amp models. 10 to 60 seconds for 3 through 20 amp models. * Switchable version combines on-off switch and circuit protection in a single unit. * Approved to many international standards (push to reset type). * Replaces slow blow glass cartridge fuse. * Labor-saving snap-in mounting. * Button extends for visual trip indication on push to reset model. * Rocker on switchable model moves to "overload" position upon trip. Agency Approvals Typical Resistance vs. Current Rating @ +25C W28 series is UL 1077 Recognized as Supplementary Protectors, File E69543, and CSA Certified as Appliance Component Protectors, File LR15734. W28 breakers have been issued Certificate of Suitability CS2190N as supplementary Equipment Protectors by the Energy Authority of New South Wales, Australia. W28 breakers are also DEMKO (Denmark) and SEV (Switzerland) approved. VDE approved for use in office equipment and provides 8mm isolation. 16 amp and 20 amp models do not have VDE, DEMKO and SEV approvals at present. W28-S is UL 1077 Recognized, and CSA Certified for models up to and including 15 amps. Current Rating in Amps Typical Resistance in Ohms 0.25 0.50 0.75 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. 14.0 3.55 2.0 0.89 0.17 0.069 0.043 0.030 0.026 0.017 Current Rating in Amps Typical Resistance in Ohms 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 20.0 0.016 0.014 0.011 0.01 0.009 0.009 0.007 0.007 0.007 0.006 Electrical Data @ 25C Mechanical/Environmental Data Calibration: Will continuously carry 100% of rating. 3-20 amp models - may trip between 101% and 134%, but must trip at 135% of rating within one hour at +25C. 0.25-2 amp models - may trip between 101% and 174%, but must trip at 175% of rating within one hour at +25C. Dielectric Strength: Over 1,500 volts RMS. Maximum Operating Voltages: 32VDC; 250VAC, 50/60 Hz. Interrupt Capacity: 1,000 amps at 250VAC, 50/60 Hz. and 32VDC in accordance with UL standard 1077. Endurance Cycling(switchable type): Typically 30,000 operations at 100% of rating. Termination: .250" (6.35mm) quick connects. Soldering to terminals is not recommended. Mounting: Snaps into panel from front. See Recommended Panel Cutouts. Approximate Weight: 0.35 oz. (10g). Ambient Compensation Chart Time vs. Current Trip Curve @ +25C 1.40 1000 900 Overload 100% 135% 200% 400% 600% 800% 1000% Load Current As A Percent Of Breaker Rating 800 700 600 (A) (B) All 0.25-2 Amp Models Trip Times No Trip Trip in 1 hour 2.2-15.0 Sec. 0.55-1.8 Sec. 0.27-0.7 Sec. 0.17-0.45 Sec. 0.12-0.3 Sec. Overload Trip Times 100% 175% 200% 400% 600% No Trip Trip in 1 hour 4.5-28.0 Sec. 1.0-6.5 Sec. 0.4-4.0 Sec. 500 1.30 Correction Factor (A) All 3-20 Amp Models 1.20 1.10 1.00 0.90 0.80 0.70 400 (B) 300 0.60 -20 -10 0 10 20 30 40 50 60 Ambient Temperature In Degrees Centigrade (C) 200 175 135 100 0 .1 1 10 100 1000 Time In Seconds Dimensions are shown for 110 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. To use this chart: Read up from the ambient temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Do not use these devices outside their specified operating temperature ranges. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B W 28 -X Q 1 A -5 1. Designator: W = Circuit breaker 2. Series Number: 28 = Single Pole Fuseholder Type 3. Circuit Function: X = Series Trip, Push-to-Reset Button S = Series Trip, Switchable Rocker 4. Terminal Type and Mounting: Q = .250" (6.35mm) Quick Connect will mount in .032"-.062" (.813mm - 1.574mm) thick panel. T = .250" (6.35mm) Quick Connect will mount in .075"-.105" (1.905mm - 2.667mm) thick panel. For panel thicknesses other than above, order "Q" type and 55-025B Internal Tooth Push-On Lockwasher. 5. Bezel Color: 1 = Black with White Rate Marking 11 = Black with No Rate Marking 2 = Red with Black Rate Marking 21 = Red with No Rate Marking B = Black with White "Reset" Marked On Bezel (No Rate Marking) Not available with Circuit Function "S" . Consult factory for other bezel colors. 6. Button Color: A = Black B = Red Consult factory for other button colors. 7. Amp Rating: 0.25 1 0.50 2 0.75 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20* Not available with Circuit Function "S" . * Contact factory for availability. Stock Items - Authorized distributors are more likely to stock the following items. W28-XT1A-12 W28-XQ1A-12 W28-XQ1A-15 W28-XQ1A-20 W28-XT1A-10 W28-XQ1A-6 W28-XQ1A-7 W28-XQ1A-8 W28-XQ1A-10 W28-XQ1A-2 W28-XQ1A-3 W28-XQ1A-4 W28-XQ1A-5 W28-XQ1A-0.25 W28-XQ1A-0.50 W28-XQ1A-0.75 W28-XQ1A-1 Outline Dimensions Push-to-Reset Type Switchable Type .19 (4.83) 1.535 MAX. (38.99) .76 MAX. (19.31) I .54 MAX. (13.716) ROCKER POSITION DURING OVERLOAD (TRIP) CONDITION .76 MAX. (19.31) O I O .325 MAX. (8.26) .37 (9.4) AMP RATING AMP RATING .625 MAX. (15.875) .250 x .032 (6.35 x .813) QUICK CONNECT TERMINALS Recommended Panel Cutouts .570-.575 (14.478-14.605) .970 DIA. (25.64) .625-.635 (15.875-16.129) 55-025B INTERNAL TOOTH PUSH-ON LOCKWASHER For panels greater than .105" (2.67) thickness Dimensions are shown for reference purposes only. Note: Dimensions are in inches over (millimeters) unless otherwise specified. .625-.635 (15.875-16.129) .540-.550 (13.716-13.970) .625-.635 (15.875-16.129) 1. Soldering to terminals is not recommended. 2. Recommended Panel Thickness: Style Q: .032" - .062" (.813 mm - 1.574 mm) Style T: .075" - .105" (1.905 mm - 2.667 mm) 3. Internal tooth push-on washer available for panel thickness not covered above. Part No. 55-025B. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 111 Catalog 1308242 Issued 3-03 P&B W51 series Rocker-Actuated Thermal Circuit Breaker/Power Switch With Optional Indicator Lamp Interrupt Capacity: 1,000 amps in accordance with UL standard 1077. Resettable Overload Capacity: Ten times rated current. Switch Endurance Cycling: Typically 6,000 operations at 100% of rating. Reset Time: 60 seconds. Features * Compact, trip-free, rocker-actuated design. * 5 to 20 amp ratings. * Provides circuit protection and power switching in a single unit. * Available with optional indicator lamp. * Snaps into the same cutout as many common power switches. * Various color, marking and termination options. Typical Resistance vs. Current Rating @ +25C Agency Approvals W51 series is UL 1077 Recognized as Supplementary Protectors, File E69543, for Canada and the United States. Current Rating in Amps Typical Resistance in Ohms Current Rating in Amps Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. 5.0 6.0 7.0 8.0 0.050 0.042 0.036 0.031 10.0 15.0 20.0 Typical Resistance in Ohms 0.025 0.017 0.0125 Electrical Data @ 25C Mechanical/Environmental Data Calibration: Will continuously carry 100% of rating. May trip between 101% and 134%, but must trip at 135% of rating within one hour at +25C. Dielectric Strength: 1,500VAC (60 seconds). Insulation Resistance: 100 megohms. Maximum Operating Voltages: 50VDC; 125 or 250VAC, 50/60 Hz. (model dependent). Operating Temperature Range: 0C to +60C. Termination: .250" (6.35mm) quick connects, solder terminals or right angle PC terminals. Mounting: Snaps into 1.122 x .531 (28.5 x 13.5) panel cutout. Approximate Weight: 0.37 oz. (10.5g). Time vs. Current Trip Curve @ +25C Outline Dimensions 1000 Overload 100% 135% 200% 300% 400% 500% 600% 900 Load Current As A Percent Of Breaker Rating 800 700 600 Trip Times No Trip Trip in 1 hour 4.0 - 40.0 Sec. 1.2 - 12.0 Sec. 0.6 - 5.0 Sec. 0.4 - 2.8 Sec. 0.3 - 1.8 Sec. .598 (15.2) .394 (10.0) 1.260 (32.0) .118 (3.0) .079 (2.0) .858 (21.8) 500 .827 (21.0) 1.232 (31.3) 400 300 .315 (8.0) 200 100 0 .1 .354 (9.0) TYP. .25 (6.35) 135 1 10 100 Time In Seconds 1000 10,000 .394 (10.0) .504 (12.8) 1.098 (27.9) .031 (0.8) TYP. 1.311 (33.3) Ambient Compensation Table Recommended Panel Cutout Ambient Temperature in C 10 20 25 30 40 50 60 Dimensions are shown for 112 reference purposes only. Rating Correction Factor 5-6A Models 7-20A Models .80 .90 1.00 1.10 1.25 1.61 2.15 .80 .90 1.00 1.05 1.15 1.25 1.40 To use this chart: Divide the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Do not use these devices outside their specified operating temperature ranges. Dimensions are in inches over (millimeters) unless otherwise specified. SUGGESTED PANEL CUTOUT .531 (13.5) 1.122 (28.5) Panel Thickness W51 series circuit breakers accommodate panel thicknesses from 0.030 in. to 0.118 in. (0.75 mm - 3.0 mm). Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information B Typical Part No. W 51 -A 1 2 1 B 1 -5 1. Designator: W = Circuit breaker 2. Series Number: 51 = Switchable, Single Pole, Rocker-Actuated Thermal Model 3. Terminals: A = Quick connect .250" (6.35mm) straight C = Printed Circuit - right angle 4. Breaker Style & Base Color: 1 = Angular button design (see drawing below), black base color B = Countoured button design (see drawing below), black base color 5. Rocker Color: 1 = Amber (translucent) 2 = Red (translucent) 3 = Green (translucent) 4 = White (opaque - for use on non-illuminated models) 5 = Black (opaque - for use on non-illuminated models) 6 = Red (opaque - for use on non-illuminated models) 7 = Gray (opaque - for use on non-illuminated models) 8 = Black (opaque) with red (translucent) indicator (only available on model with contoured button) 9 = Black (opaque) with green (translucent) indicator (only available on model with contoured button) 6. Maximum Operating Voltage (AC): 1 = 125VAC 2 = 250VAC 7. Light: A = Non-illuminated B = Illuminated 8. Marking option: 0 = No marking 1 = RESET/OFF printed 9. Specify Amp Rating: 5 6 7 2 = RESET/OFF molded (only available on model with contoured button) 8 10 15 20 Our authorized distributors are more likely to stock the following items for immediate delivery. W51-A121B1-5 W51-A121B1-10 W51-A121B1-15 W51-A121B1-20 W51-A122B1-5 W51-A122B1-10 W51-A122B1-15 W51-A122B1-20 W51-A152A1-5 W51-A152A1-10 W51-A152A1-15 W51-A152A1-20 ORDERING NOTE: Some options illustrated below are not listed in the "Ordering Information" chart above. Options denoted by "Special" or "Special Order" in their descriptions are only offered on a special order basis. Other base and button colors and intermediate amp ratings are also available on a special order basis. All special order items are subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Case Styles Marking Options For Angular Button Design (Printed) Standard RESET/OFF Printed on Bezel Angular Button Design Standard No Marking For Contoured Button Design (Molded) Standard RESET/OFF Molded into bezel Contoured Button Design Terminal Types .205 (5.2) .374 (9.5) .098 X .157 (2.5 x 4.0) .25 (6.35) .393 (10.0) Standard - .250 Quick Connect Terminal Dimensions are shown for reference purposes only. .157 X .098 (4.0 x 2.5) .298 (7.55) .25 (6.35) .393 (10.0) .250 (6.35) .504 (12.8) TERMINAL THICKNESS .032 FOR ALL TYPES (.81) Special Order Solder Terminal .601 (15.26) .66 (16.76) .156 (3.95) Standard - Right Angle PC Terminal Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 113 Catalog 1308242 Issued 3-03 P&B W33 series One- and Two-Pole, Switchable Thermal Circuit Breaker / Power Switch With Optional Indicator Lamp Features Electrical Data @ 25C * Combines on/off switch and circuit protection in a single unit. * 2 to 20 amp ratings (<2A types available as special order). * One or two pole sensing. * Lighted or non-lighted rocker actuator in various colors. * Convenient, snap-in mounting. * Optional auxiliary switch available. * Trip-free operation. Calibration: Breaker will continuously carry 100% of rated load. It may trip between 101% and 135%, but must trip at 135% within one hour at +25C. Dielectric Strength: Over 2,000 volts RMS. Maximum Operating Voltages: 50VDC; 250VAC to 400 Hz. Interrupt Capacity: 1,000 amps at 50VDC; 250VAC, 60 Hz. and 125/250VAC, 400 Hz. 1,500 amps at 125/250VAC, 60 Hz. Resettable Overload Capacity: Ten times rated current. Agency Approvals Mechanical/Environmental Data W33 series is UL 1077 Recognized as Supplementary Protectors, File E69543, and CSA Certified as Appliance Component Protectors, File LR15734. Termination: Poles 1&2: .250" (6.35mm) quick connect/solder terminals. Opt. Aux. Sw.: .110"(2.79mm) quick connect terminals. Mounting: Snaps into panel from front. Actuator: Rocker or lighted rocker. Shock: 30g tested to IEC 68-2-27, test Ea. Vibration: 8g tested to IEC 68-2-6, test Fc. Switch Endurance Cycling: 50,000 operations at rated load. 1,000 operations at 200% rated load. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Ambient Compensation Chart Time vs. Current Trip Curve @ +25C 1000 800 700 600 1.30 Correction Factor 900 Load Current As A Percent Of Breaker Rating 1.40 All Models Overload Trip Times No Trip 100% Trip in 1 hour 135% 3.0 - 33 Sec. 200% 0.6 - 10 Sec. 400% 0.34 - 5 Sec. 600% 0.25 - 2.2 Sec. 800% 0.20 - 0.6 Sec. 1000% 500 0.90 0.80 -20 -10 0 10 20 30 40 50 60 Ambient Temperature In Degrees Centigrade (C) 200 100 1 10 100 1000 Time In Seconds Dimensions are shown for 1.00 0.60 300 114 reference purposes only. 1.10 0.70 400 0 .1 1.20 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. To use this chart: Read up from the ambient temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 33 -S 1 N 1 Q -20 1. Designator: W = Circuit breaker 2. Series Number: 33 = Two pole, rocker actuated 3. Circuit Function: S = Pole 1 - Switch only; Pole 2 - Series trip overload sensing. T = Poles 1 & 2 - Series trip overload sensing. SS = Same as S with auxiliary switch on pole 1. TS = Same as T with auxiliary switch on pole 1. D = 2 Pole switching. 4. Rocker Color: 1 = Black. 2 = White. 3 = Red. 4 = Amber. 5 = Smoke. 5. Light (available only with White, Red, Amber and Smoke rocker colors): A = 24VDC (Incandescent). B = 120VAC (Neon with resistor). C = 240VAC (Neon with resistor). 6. Marking: 1 = International I/O. N = No light. 2 = Contrasting I/O stamp (white toggle with black stamp). 7. Termination: Q = .250" x .032" (6.35 x .813mm) quick connect / solder terminals. 8. Amp Rating: 2 5 7 10 12 15 16 20 Consult factory for availability of ratings <2A Stock Items - Authorized distributors are more likely to stock the following items. W33-T4B1Q-5 W33-T4B1Q-10 W33-T4B1Q-15 W33-S4B1Q-10 W33-S4B1Q-15 W33-T2N1Q-20 W33-S1N1Q-5 W33-S1N1Q-15 W33-S1N1Q-20 Schematic Outline Dimensions POLE 2 ROCKER .980 (24.89) 1.724 (43.79) POLE 1 LINE SIDE .850 (21.59) I 1.890 (48.01) 0 1.690 (42.93) 1.120 (28.45) PANEL CLAMPING ARRANGEMENT .412 (10.46) .250 (6.35) LOAD SIDE NEON - AC INCANDESCENT - DC FITS .875 x 1.750 (22.22 x 44.45) PANEL OPENING FROM .032" - .250"(.813mm - 6.35mm) THICK Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 115 Catalog 1308242 Issued 3-03 P&B W23/W31 series Toggle or Push/Pull Actuator Thermal Circuit Breaker W23 W31 Maximum Resistance vs. Current Rating @ +25C Features * 0.5 amp to 50 amp ratings may be used as on/off switch. * Cannot be reset against overload. * W23 has visible trip indicator. * Screw termination. * Trip-free operation. Current Rating in Amps Maximum Resistance in Ohms 30% 1 5 10 15 20 30 40 50 Agency Approvals W23 and W31 are UL 1077 Recognized as Supplementary Protectors. File E69543, and CSA Certified as Appliance Component Protectors, File LR15734. .61 .03 .01 .006 .004 .003 .002 .002 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ +25C Mechanical/Environmental Data Calibration: Will continuously carry 100% of rating, may trip between 101% and 134% of rating at 25C. Must trip at 135% in one hour. Maximum Operating Voltages: 50VDC or 250VAC (to 400 Hz). Interrupting Capacity: With 4X Max. Series Fuse Protection 0.5-50 amp models -- 1000 amps at 240VAC. 30-50 amp models -- 1000 amps at 50VDC. Without 4X Max. Series Fuse Protection 0.5-25 amp models -- 2000 amps at 50VDC. 10-20 amp models -- 2000 amps at 120VAC. Resettable Overload Capacity: Ten times rated current. Dielectric Strength: Over 1,500 volts RMS. Endurance Cycling: More than 6,000 cycles at 100% of rating, or 10,000 mechanical cycles. Humidity: Will meet requirements of MIL-STD-202, Method 106. Salt Spray: Will meet requirements of MIL-STD-202, Method 101, Test Condition B. Termination: Two #8-32 screw terminals. Mounting: W23 -- Threaded bushing, 3/8" (9.53mm) diameter. W31 -- Threaded bushing, 15/32" (11.91mm) diameter, with or without anti-rotation flats. Weight: Less than 2 oz. (57g). Time Vs. Current Trip Curve @ +25C Ambient Compensation Chart 1.40 1000 900 Overload (A) 800 Load Current As A Percent Of Breaker Rating 100% 135% 200% 400% 600% 800% 1000% 700 600 (B) All 0.5-4 Amp Models Trip Times Overload 100% 135% 200% 400% 600% 800% 1000% No Trip Trip in 1 hour 6.0-22 Sec. 1.0-3.0 Sec. 0.45-1.5 Sec. 0.3-0.8 Sec. 0.25-0.6 Sec. 1.30 Trip Times No Trip Trip in 1 hour 11-30 Sec. 2.0-8.0 Sec. 1.0-5.5 Sec. 0.6-4.0 Sec. 0.4-2.5 Sec. 500 Correction Factor (A) All 5-50 Amp Models (B) 400 1.20 1.10 1.00 0.90 0.80 0.70 300 0.60 200 -20 -10 0 10 20 30 40 50 60 Ambient Temperature In Degrees Centigrade (C) 100 0 .1 1 10 Time In Seconds Dimensions are shown for 116 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 100 1000 To use this chart: Read up from the ambient temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 23 -X 1 A 1 G -5 M 1 G -5 1. Designator: W = Circuit breaker 2. Series Number: 23 = Single pole, push/pull 3. Circuit Function: X = Series trip 4. Button: 1 = Black with white amp rate marking and white trip band. 5. Mounting Bushing: A = 3/8"-24 threaded bushing .375" (9.53mm) long, silver color 6. Terminals (See drawings for relative terminal positions): 1 = Screw terminals situated 90 to each other with #8-32 screws and washers installed. 3 = Screw terminals situtated parallel to each other pointing upward with #8-32 screws and washers installed. 7. Mounting Hardware: A = Knurled nut/hex nut installed G = Two hex nuts/lockwasher installed Z = No mounting hardware supplied 8. Amp Rating: 0.5 3 1 4 2 5 7.5 10 15 20 25 30 35 40 50 Stock Items - Authorized distributors are more likely to stock the following items. W23-X1A1G-1 W23-X1A1G-2 W23-X1A1G-3 W23-X1A1G-5 W23-X1A1G-7.50 W23-X1A1G-10 W23-X1A1G-15 W23-X1A1G-20 W23-X1A1G-50 W23-X1A1G-25 W23-X1A1G-30 W23-X1A1G-35 W23-X1A1G-40 Ordering Information Typical Part No. B W 31 -X 2 1. Designator: W = Circuit breaker 2. Series Number: 31 = Single pole, toggle actuator 3. Circuit Function: X = Series trip 4. Mounting Bushing: 1 = 15/32"-32 threaded bushing .320" (8.13mm) long, round, silver color 2 = 15/32"-32 threaded bushing .320" (8.13mm) long, double "D" , silver color 5. Toggle: M = Silver color metal toggle, round, with amp rate marking on end 6. Terminals (See drawing for relative terminal positions): 1 = Screw terminals situated 90 to each other with #8-32 screws and washers installed. 5 = Screw terminals situated parallel to each other pointing downward with #8-32 screws and washers installed. 7. Mounting Hardware: A = Knurled nut/hex nut intalled G = Two hex nuts/lockwasher installed Z = No mounting hardware supplied 8. Amp Rating: 0.5 3 1 4 2 5 7.5 10 15 20 25 30 35 40 50 Stock Items - Authorized distributors are more likely to stock the following items. W31-X2M1G-1 W31-X2M1G-2 W31-X2M1G-3 W31-X2M1G-5 W31-X2M1G-7.50 Dimensions are shown for reference purposes only. W31-X2M1G-10 W31-X2M1G-15 W31-X2M1G-20 W31-X2M1G-25 W31-X2M1G-30 W31-X2M1G-35 W31-X2M1G-40 W31-X2M1G-50 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 117 Catalog 1308242 Issued 3-03 P&B W23 Outline Dimensions Terminal Style 3 Terminal Style 1 .690 (17.53) AMP RATING .250 (6.35) 1.384 (35.15) 5 3/8-24 THREADED BUSHING .315 Dia. (8.00) .388 (9.86) 1.600 (40.64) 1.890 (48.01) Mounting Hardware 45 .56 (14.2) .56 (14.22) 0.9 (2.29) inches All dimensions are given as (mm) .046 (1.17) 2.035 (51.69) Lockwasher (88-006B - Silver Color) Hex Nut (55-001D - Silver Color) 45 .46 (11.7) .03 MAX. (.76) .570 (14.48) .046 (1.17) #8-32 SCREWS WITH WASHERS RESET BUTTON IN "ON" POSITION WHITE INDICATOR NOT VISIBLE Suggested Mounting Holes Knurled Nut (55-008A - Silver Color) ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS STRAIGHT KNURL .562 (14.27) .562 (14.27) .545 - .567 (13.84 - 14.40) .078 (1.98) .018 (.46) .085 (2.16) .375-.386 (9.53-9.80) W31 Outline Dimensions Terminal Style 1 .690 (17.53) Terminal Style 5 AMP RATING .03 MAX (.76) "ON" POSITION #8-32 SCREWS WITH WASHERS 15/32-32 THREADED BUSHING 45 .09 (2.3) 5 1.384 (35.15) .46 (11.7) 30 REF. .56 (14.2) .56 (14.2) .335 (8.51) .380 (9.65) ANTI-ROTATION FLATS "OFF" POSITION 45 1.600 (40.64) .625 (15.88) 2.035 (51.69) .046 (1.17) .046 (1.17) Mounting Hardware Suggested Mounting Holes Hex Nut (55-001B - Silver Color) Lockwasher (88-002B - Silver Color) Knurled Nut (55-010B - Silver Color) ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS STRAIGHT KNURL .600 (15.24) .545 - .567 (13.84 - 14.40) Dimensions are shown for 118 reference purposes only. .078 (1.98) .018 (.46) Dimensions are in inches over (millimeters) unless otherwise specified. .635 (16.13) .125 (3.18) Specifications and availability subject to change. .470 (11.94) .470 (11.94) .385 (9.78) www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W6/W9 series Magnetic Hydraulic Circuit Breakers Features Typical Resistance and Impedance * Designed for the international market. UL Recognized, CSA Certified, and VDE approved. * Ratings to 50 amps. * Heavy duty #10-32 stud connections. (W9) * Quick-connect or screw terminals. (W6) * Optional 10 amp auxiliary switch. * Several delay curve options. * Trip-free operation. Agency Approvals Recognized as Supplementary Protector under UL 1077. File E69543. CSA: Certified as a Supplementary Protector. File LR15734. VDE: Approved to VDE 0642/EN 60 934 (Circuit Breakers for Equipment) License No. 73782. UL: Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data Auxiliary Switch: See Auxiliary Switch Ratings Table 2 for details. Calibration: Breakers will hold 100% of rated current. Breakers may trip between 101% and 124% of rated load (149% for 400 Hz. units and 134% for AC/DC units). Breakers must trip at 125% of rated load and above (150% for 400 Hz. units and 135% for AC/DC units). Dielectric Strength: 50/60 or 400 Hz., 1500V: DC, 1100V. Insulation Resistance: 100 Megohms at 500VDC. Endurance: 10,000 on/off cycles - 6000 at rated load, 4000 at no load. Units tested at six cycles per minute, 1 second on and 9 seconds off at 25C ambient. Current (Amps) 0.2 1.0 2.0 5.0 10.0 20.0 30.0 40.0 50.0 DC Resistance (Ohms) 90 1.2 0.28 0.04 0.013 0.004 0.0027 0.002 0.0015 50/60 Hz. Impedance (Ohms) 90 1.2 0.28 0.04 0.013 0.005 0.004 0.002 0.0015 400 Hz. Impedance (Ohms) 180 2.0 0.50 0.05 0.025 0.0065 0.004 0.003 0.0025 Tolerance: 0.1 - 4.99 15%; 5 - 9.99 20%; 10 - 15 25%; 16 - 30 50%. Mechanical/Environmental Data Operating Temperature: -40C to +85C. Humidity: Meets requirements of Mil-STD-202 method 103. Shock: Tested per Mil-STD-202, method 213, test condition C (100g @ 6 ms). Vibration:Tested per Mil-STD-202, method 201, 10-55 Hz., 0.06" (1.52mm) total excursion in 2 planes. Fungus And Moisture Resistance: Special moisture resistant finish applied to all ferrous parts. Plastic parts are made of inherently fungus resistant material. Marking: W6 units have ON and OFF molded on the rocker of rocker actuated units (rocker actuated VDE units have international "1" and "0"). W9 units have ON and OFF molded into the area at the base of the toggle. International "1" and "0" symbols are marked on the toggle for both W6 and W9. Mounting: Units are mounted with two #6-32 screws from the front of the panel. Metric models for use with M3 x 0.5 screws are available. To maintain published performance specifications, units should not be mounted more than 90 from their normal upright position. Weight: Approximately 2.5 ounces per pole. Approvals and Ratings Table 1 W6 Series Maximum Voltage 65 277 277 277/480 250 250 250 UL/CSA (All Circuit Functions) Frequency (Hz) DC 50/60 50/60 50/60 400 400 400 W9 Series Maximum Voltage 65 277 277/480 250 250 Current Rating (Amps) 0.2 - 50 0.2 - 20 21 - 50 0.2 - 20 0.2 - 20 21 - 50 0.2 - 20 Phase 1 1 3O-Wye 1 1 3O-Wye W6 Series Interrupting Capacity (Amps) 2,000 5,000 2,500 5,000 2,500 1,250 2,500 UL/CSA (All Circuit Functions) Frequency (Hz) DC 50/60 50/60 400 400 Current Rating (Amps) 0.2 - 50 0.2 - 50 0.2 - 20 0.2 - 50 0.2 - 50 Phase 1 3O-Wye 1 3O-Wye Maximum Voltage 65 250 250 415/240 W9 Series Interrupting Capacity (Amps) 2,000 5,000 5,000 2,500 2,500 Maximum Voltage 65 250 250 415/240 VDE (Circuit Function X) Frequency (Hz) DC 50/60 50/60 50/60 Phase 1 1 3O Current Rating (Amps) 0.2-50 0.2-30 31-50 0.2-30 Interrupting Capacity (Amps) 2,000 5,000 2,000 5,000 VDE (Circuit Function X) Frequency (Hz) DC 50/60 50/60 50/60 Phase 1 1 3O Current Rating (Amps) 0.2-50 0.2-30 31-50 0.2-30 Interrupting Capacity (Amps) 2,000 5,000 2,000 5,000 Approvals and Ratings Table 2 UL/CSA Switch Number Voltage 50/60 Hz. Current (Amps) Terminals WxTxL A 125 10 .093 x .020 x .250 (2.36 x .51 x 6.40) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 119 Catalog 1308242 Issued 3-03 P&B Time vs. Current Trip Curves For W6 Series and W9 Series AC 50/60 Hz. DC & 50/60 Hz. TRIP TIMES OVERLOAD @ 50/60 Hz. & DC @ 400 Hz. TIME IN SECONDS 1000 125% 150% 200% 400% 600% 800% 100 10 100 ms max. 55 ms max. 30 ms max. 15 ms max. 12 ms max. 12 ms max. May Trip 100 ms max. 30 ms max. 15 ms max. 12 ms max. 12 ms max. 1 .1 10,000 CURVE 2 AC VOLTAGE 50/60 Hz. OVERLOAD TRIP TIMES (SEC.) 1000 125% 200% 400% 600% 800% 1000% 100 10 10 - 150 2.2 - 20 .2 - 2 .03 - .75 .007 - .15 .005 - .04 1 .1 10 1 .01 .01 .001 0 TIME IN SECONDS 1000 100 10 1 .1 10,000 125% 200% 400% 600% 800% 1000% 100 10 10 - 150 3 - 25 .5 - 2.5 .15 - 1 .015 - .7 .009 - .35 1 .1 .001 0 CURVE 13 HIGH INRUSH 50/60 Hz. OVERLOAD TRIP TIMES (SEC.) 1000 125% 200% 400% 600% 800% 1000% 100 10 .8 - 30 .15 - 2.5 .03 - .3 .02 - .15 .009 - .12 .009 - .09 1 .1 .01 .01 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING 10,000 OVERLOAD TRIP TIMES (SEC.) 1000 .01 .001 0 CURVE 12 HIGH INRUSH 50/60 Hz. TIME IN SECONDS OVERLOAD TRIP TIMES (SEC.) 125% 40 - 500 200% 9 - 100 400% 2 - 20 600% .8 - 10 800% .1 - 4.5 1000% .009 - 2 TIME IN SECONDS MOTOR START CURVE 10 HIGH INRUSH 50/60 Hz. AC 1 - 15 .15 - 1.5 .03 - .25 .007 - .15 .003 - .08 .003 - .04 .1 .001 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING 125% 200% 400% 600% 800% 1000% 100 .01 10,000 OVERLOAD TRIPTIMES (SEC.) 1000 .001 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING CURVE 3 AC VOLTAGE 50/60 Hz. 10,000 TIME IN SECONDS CURVE 0 NON-TIME DELAY TIME IN SECONDS 400 Hz. 10,000 .001 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING DC 125% 200% 400% 600% 800% 1000% 100 10 1 2 - 55 .60 - 8 .1 - 1.5 .02 - .5 .004 - .05 .004 - .025 .1 OVERLOAD TRIP TIMES (SEC.) 1000 TIME IN SECONDS TIME IN SECONDS 1000 CURVE 3 DC VOLTAGE 10,000 OVERLOAD TRIP TIMES (SEC.) 125% 200% 400% 600% 800% 1000% 100 10 1 .6 - 7 .16 - 1.5 .03 - .25 .01 - .13 .004 - .05 .003 - .015 .1 100 10 1 .1 .01 .01 .001 0 .001 0 .001 0 AC/DC 135% 200% 400% 600% 800% 1000% 100 10 1 - 90 .60 - 20 .095 - 2 .02 - .95 .002 - .45 .002 - .09 1 .1 10,000 CURVE 2 AC VOLTAGE 400 Hz. OVERLOAD TRIP TIMES (SEC.) 1000 150% 200% 400% 600% 800% 1000% 100 10 1 5 - 60 2.2 - 20 .3 - 3.2 .01 - .17 .006 - .06 .005 - .045 .1 150% 200% 400% 600% 800% 1000% 100 10 .55 - 5.5 .18 - 2 .02 - .2 .006 - .075 .004 - .05 .004 - .035 1 .1 .01 .01 .01 .001 0 .001 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING OVERLOAD TRIP TIMES (SEC.) 1000 .001 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT 135 OF BREAKER RATING CURVE 3 AC VOLTAGE 400 Hz. 10,000 TIME IN SECONDS OVERLOAD TRIP TIMES (SEC.) 1000 TIME IN SECONDS 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING AC 400 Hz. CURVE 34 DC, 50/60 Hz. STANDARD DELAY TIME IN SECONDS 10,000 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING OVERLOAD TRIP TIMES (SEC.) 125% 80 - 700 200% 15 - 150 400% 2 - 20 600% .70 - 10 800% .10 - 3 1000% .01 - .1 1000 .01 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING CURVE 53 DC HIGH INRUSH 10,000 TIME IN SECONDS CURVE 2 DC VOLTAGE 10,000 100 200 300 400 500 600 700 800 900 1000 1100 1200 125 150 LOAD CURRENT AS A PERCENT OF BREAKER RATING Note: For instantaneous curves for all voltages refer to Curve 0 Non-Time Delay under the AC 50/60 Hz. heading. Pulse Tolerance Specifications Pulse tolerance is defined as a single pulse of a half sine wave (1/2 cycle or 8 milliseconds) that will not trip the breaker. An inertia wheel for increased pulse tolerance is available by specifying "P" after the time delay curve number in the ordering information. The table at right lists pulse tolerance values of standard and inertia delay models. Voltage AC 50/60 Hz. AC 400 Hz. Pulse Tolerance Value Time Delay Curve Standard Inertia Delay 2 3 10 12 13 7.5 6 18 18 18 18 18 30 30 30 2 3 6.5 5.5 18 18 To determine pulse tolerance multiply breaker rating by value in table. For example, a 2A breaker with time delay curve 3 has a standard pulse tolerance of 12A (2A x 6). The same breaker with an inertia delay has a pulse tolerance of 36A (2A x 18). Dimensions are shown for 120 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information W6 Series Typical Part No. B W 67- X 2 Q 2- 20 1 1. Circuit Breaker Mounting: W = #6-32 mounting threads. M = M3.0 x 0.5 mounting threads. 2. Number of Poles: 67 = Single pole 68 = Two pole 69 = Three pole 3. Circuit Function: (Only X is VDE approved) A = Series trip with auxiliary switch (.093" QC) 4. Actuator: (One actuator per pole) 1 = Black toggle 3 = Black rocker 2 = White toggle 4 = White rocker 70 = Four pole X = Series trip 5 = Red rocker 6 = Grey rocker 5. Termination: Q = .250" QC (DIN 46 244) [25A Max. VDE] 9 = Red toggle S = #8-32 screw [30A Max. VDE] T = #10-32 screw [50A Max. VDE] Note: "T" termination must be used for all ratings of 31 amps or above. 6. Maximum Line Voltage: (See Table 1 for current ranges) UL/CSA 1 = 277VAC, 50/60 Hz. VDE TYPES 2 = 277/480 TYPES 3 = 250VAC, 400 Hz. 5 = 65VDC 7 = AC/DC 277VAC or 65VDC (Delay curve 34 must be specified.) 7. Time Delay Curve: 0 = Instantaneous 2 = Standard delay 3 = Short delay 53 = DC high inrush 8. Amp Rating: 0.20 0.50 0.25 0.75 1 = 250VAC, 415/240VAC 5 = 65VDC 7 = AC/DC 250VAC, 415/240VAC, 65VDC (Delay curve 34 must be specified.) 10 = AC high inrush (Motor start) 12 = AC high inrush version of #2 13 = AC high inrush version of #3 34 = Combination AC/DC standard delay 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 Notes: Curves may be specified with increased pulse tolerance for 1/2 cycle by adding "P" after curve, See delay curve section for availability and details. 7.5 8.0 9.0 10.0 11.0 12.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 Consult factory for other values. 9. VDE Approval: Blank = UL/CSA approved breaker V = VDE approved breaker without auxiliary switch Authorized distributors are more likely to stock the following items. W67-A2Q12-5 W67-A2Q12-10 W67-X2Q10-3 W67-X2Q10-5 W67-X2Q12-2 W67-X2Q12-3 W67-X2Q12-5 W67-X2Q12-7 W67-X2Q12-10 W67-X2Q12-15 W67-X2Q12-20 W67-X2Q12-30 W67-X2Q13-1 W67-X2Q13-2 W67-X2Q13-3 W67-X2Q13-10 W67-X2Q13-15 W67-X2Q13-20 W67-X2Q13-25 W67-X2Q13-30 W67-X2Q50-5 W67-X2Q50-10 W67-X2Q52-5 W67-X2Q52-10 W67-X2Q52-15 W67-X2Q52-20 W67-X2Q52-30 W67-X2Q110-15 W67-X2Q110-20 W68-X2Q12-3 W68-X2Q12-5 W68-X2Q12-7 W68-X2Q12-10 W68-X2Q12-15 W68-X2Q12-20 W68-X2Q12-25 W68-X2Q12-30 W68-X2Q13-15 W68-X2Q110-10 W68-X2Q110-20 W69-X2Q12-5 W69-X2Q12-10 W69-X2Q12-15 W69-X2Q12-20 W69-X2Q12-25 W69-X2Q12-30 W69-X2Q110-20 W69-X2Q110-30 Ordering Information W9 Series Typical Part No. 1. Circuit Breaker Mounting: W = #6-32 mounting threads. 2. Number of Poles: 91 = Single pole B W 91- X 1 1 2- 20 M = M3.0 x 0.5 mounting threads. 92 = Two pole 93 = Three pole 3. Circuit Function: (Only X is VDE approved) A = Series trip with auxiliary switch (.093" QC) 94 = Four pole X = Series trip 4. Actuator: (One actuator per pole): 1 = Black toggle 2 = White toggle 5. Maximum Line Voltage: (See Table 1 for current ranges) UL/CSA 1 = 277VAC, 50/60 Hz. VDE 1 = 250VAC, 415/240VAC TYPES 2 = 277/480 TYPES 5 = 65VDC 3 = 250VAC, 400 Hz. 7 = AC/DC 250VAC, 415/240VAC, 65VDC 5 = 65VDC (Delay curve 34 must be specified.) 7 = AC/DC 277VAC or 65VDC (Delay curve 34 must be specified.) 6. Time Delay Curve: 0 = Instantaneous 2 = Standard delay 3 = Short delay 53 = DC high inrush 7. Amp Rating: 0.20 0.75 0.25 1.0 0.50 1.5 10 = AC high inrush (Motor start) 12 = AC high inrush version of #2 13 = AC high inrush version of #3 34 = Combination AC/DC standard delay 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 7.5 8.0 9.0 10.0 Notes: Curves may be specified with increased pulse tolerance for 1/2 cycle by adding "P" after curve. See delay curve section for availability and details. 11.0 12.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 Consult factory for other values 8. VDE Approval: Blank = UL/CSA approved breaker V = VDE approved breaker without auxiliary switch Authorized distributors are more likely to stock the following items. W91-X112-1 W91-X112-2 W91-X112-3 W91-X112-5 W91-X112-7 W91-X112-10 Dimensions are shown for reference purposes only. W91-X112-15 W91-X112-20 W91-X112-40 W91-X112-50 W91-X113-5 W91-X113-10 W91-X113-15 W91-X150-5 W91-X152-10 W91-X152-15 W91-X152-20 W91-X152-30 W91-X152-40 W91-X152-50 W91-X1110-20 W92-X112-1 W92-X112-2 W92-X112-3 Dimensions are in inches over (millimeters) unless otherwise specified. W92-X112-5 W92-X112-7 W92-X112-10 W92-X112-15 W92-X112-20 W92-X112-25 W92-X112-30 W92-X112-40 W92-X112-50 W92-X113-15 W92-X113-20 W92-X1110-20 Specifications and availability subject to change. W92-X1110-30 W93-X112-5 W93-X112-10 W93-X112-15 W93-X112-20 W93-X112-25 W93-X112-30 W93-X112-40 W93-X112-50 W93-X1110-20 W93-X1110-30 www.tycoelectronics.com Technical support: Refer to inside back cover. 121 Catalog 1308242 Issued 3-03 P&B Outline Dimensions - Toggle Actuator Models W6 Series Panel Mounting Cutout 1.640 (41.66) .235 (5.97) LINE .245 (6.22) O N A 1.530 (38.86) .750 (19.05) O .625 +.010 -.000 15.88 +0.25 -0.00 1 PER POLE ( 29 ) 1.660 (42.16) 30 1.048 (26.62) OFF B LOAD 2.040 (51.82) O .156 (3.96) [2 PLACES PER POLE] .67 (17.02) W6 Series 1 Pole 2 Pole 3 Pole 4 Pole O .590 (15.00) 1.500 (38.10) .750 (19.05) 3.000 (76.20) 1.660 (42.16) 2.000 (50.80) 1.22 (31.00) 2.250 (57.15) 1.05 (26.67) 6.32 TH'D. .14 (3.56) DP. TYP. M3 X 0.5 OPTIONAL Note: Multi-pole models furnished with separate handle tie hardware. VDE Models W/Screw Terminals UL/CSA Models W/Screw Terminals .235 (5.9) LINE 2.032 (51.61) UL/CSA/VDE Models W/Aux. Switch 2.38 "A" STYLE (60.45) .416 (10.57) LINE LINE 1.530 (38.86) .827 (20.85) 1.058 (26.87) C NO NC LOAD LOAD LOAD Notes: 1. Terminal protrusion dimensions are referenced from back of mounting panel. 2. Main terminals are male quick connect type .250 (6.35) wide x .031 (.79) thick x .377 (9.58) long. Optional 8-32 x .250 (6.35) or 10-32 x .250 (6.35) screw type. 3. Panel mounting cutout detail mtg. detail tol.: .005 (.13) unless noted. Add additional cutouts to correspond to number of poles. Outline drawing tolerance .015 (.38) unless noted. Dimensions in brackets ( ) are in millimeters. Dimensions are shown for 122 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions - Rocker Actuator Models W6 Series 1 Pole .805 (20.45) 1.640 (41.66) 3.000 (76.20) 2.250 (57.15) .750 (19.05) .390 (9.91) 1.500 (38.10) 2 POLE .375 (9.53) .180 (4.57) LOAD 2, 3 & 4 Pole D 1.530 (38.86) 2.000 (50.80) 1.30 (33.0) 1.660 (42.16) .388 (9.86) ON 2.600 (66.04) OFF A LINE .235 (5.97) 2.430 (61.72) 4 POLE ON OFF .750 (19.05) .750 (19.05) .750 (19.05) .375 (9.53) 2.000 (50.80) .750 (19.05) 1.500 (38.10) 2.250 (57.15) 3.000 (76.20) O .156 (3.96) TYP. 2 PER POLE Notes: 1. Outline drawing tolerance .015 (.38) unless noted. Dimensions in brackets ( ) are in millimeters. 2. Mounting Detail Tol.: .005 (.13) unless noted .388 (9.86) I 2.600 (66.04) O 3 POLE ON OFF .750 (19.05) .205 (5.21) .750 (19.05) 1.250 (31.75) 1.660 (42.16) 2 POLE ON OFF VDE Rocker Marking .750 (19.05) .750 (19.05) .375 (9.53) ON OFF .375 (9.53) TAPPED FOR #6-32 M3 X 0.5 OPTIONAL Panel Mounting Cutout 1 POLE 4 POLE 3 POLE TAPPED FOR #6-32 M3 X 0.5 OPTIONAL Outline Dimensions W9 Series Series Trip Model Series Trip Model .750 (19.05) 1.845 (46.86) .281 (7.14) LINE .313 (7.95) .375 (9.53) ON ON ON 29 1.940 (49.28) 30 OFF OFF .750 (19.05) .375 (9.53) .218 (5.54) 2.065 (52.45) OFF .750 (19.05) .750 (19.05) .398 (10.77) ON ON ON ON ON ON ON ON 1.438 (36.53) 2.50 OFF OFF OFF OFF OFF OFF OFF OFF (63.5) LOAD .14 2.10 (3.56) (53.34) 2.50 (64.00) #10-32 STUD TERMINATION .74 (18.8) Series Trip Model With Common Enclosed Auxiliary Switch TAPPED #6-32 X .16 (4.06) DEEP M3 X 0.5 OPTIONAL .750 (19.05) .732 (18.59) .750 (19.05) .750 (19.05) .385 (9.78) .907 (23.04) LINE 1.940 (49.28) 1.450 (36.83) C NO 2.065 (52.45) NC LOAD 2X O .156 (3.96) PER POLE 2.50 (64.00) 3.04 (77.2) Dimensions are shown for reference purposes only. 4 POLE Panel Mounting Cutout Detail 2.46 (62.48) 'A' STYLE .281 (7.14) 2 POLE 1.500 (38.10) 2.250 3POLE (57.15) 3.000 (76.20) 1 POLE Dimensions are in inches over (millimeters) unless otherwise specified. 2.28 (57.9) Specifications and availability subject to change. .76 (19.3) 1.52 (38.6) Notes: 1. Terminal protrusion dimensions are referenced from the back of the mounting panel. 2. Mounting detail tolerance .005 (13) unless noted. 3. Outline drawing tolerance .015 (.38) unless noted. Dimensions in brackets ( ) are in millimeters. 1 POLE 2 POLE 3 POLE 4 POLE www.tycoelectronics.com Technical support: Refer to inside back cover. 123 Catalog 1308242 Issued 3-03 P&B Engineering Notes Dimensions are shown for 124 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TRANSFORMERS Alphanumeric Index Series Type Page 4000 ................... 5-30VA, Wire Leads, Class II ................... 204 Circuit Breakers ........................ 101-124 1 Transformers ........................... 201-212 2 Low-signal PC Board Relays .......... 5-18 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Relays with Forcibly-Guided Contacts.............. 36-79 6 Plug-in/Panel Mount General Purpose Relays................ 80-88 7 Power Relays & Definite Purpose Contactors...................... 89-131 8 Latching, Impulse & Rotary Relays ............................... 149-154 9 Automotive Relays ...................... 141-148 10 Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 4000 ................... 10-30VA, QC Terminals, Class II ............. 205 4000 ................... 20-40VA, Plate Mount, Class II ................ 206 4000 ................... 40-50VA, Wire Leads, Class II ................. 207 4000 ................... 40-50VA, QC Terminals, Class II ............. 208 4000 ................... 60-75VA, Wire Leads, Class II ................. 209 4000 ................... 60-75VA, QC Terminals, Class II ............. 210 4700 ................... 60-150VA, Wire Leads or QC, UL 508 .... 211 57 ....................... Transformer Relay for HVAC ................... 212 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 201 Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Transformers...Questions and Answers What is a Transformer? A transformer is a passive electrical device which is designed to change one AC voltage to another by magnetic induction. It "steps-up" or "steps-down" voltage in order to match incoming supply voltage from the utility to the voltage required by the user's end product. Typical USA supply voltages are 120, 208, 240, 277, 480 (and 575 in Canada). Common International voltages include 110, 220, 380, and 415. What is an Isolation Transformer? An isolation transformer is a transformer whose primary and secondary windings are separate for the purpose of isolating the circuit from the supply source. What is an Autotransformer? An autotransformer has only one winding, which is shared by the primary and secondary circuits. Autotransformers do not provide isolation but offer a substantial savings when used to obtain small increments of voltage above or below the input voltage. What is a Class II Transformer? A Class II transformer is used to supply Class II circuits. Class II transformers have a maximum VA (Volt-Ampere) rating of less than 100 and a maximum secondary output of 30 VAC. The maximum VA generally offered is 75 and the most common secondary voltage is 24 VAC. All Class II transformers are either inherently or non-inherently limited. This means that the maximum output current of the transformer is limited, either by the intrinsic coil impedance or by a fuse or circuit breaker. These transformers are designed to meet the requirements of U.L. 1585. Inherently Energy Limited Transformers - Class II transformers up to 50 VA are "Inherently Limited" which means that the transformer, if overloaded, will short itself out and fail safely, not requiring a fuse. Non-Inherently Energy Limited Transformers - 60 thru 75 VA Class II transformers are generally protected by a resettable circuit breaker or a fuse within the transformer secondary. Without this overload protection, the transformer would not satisfy the safety requirements for a Class II circuit. What is a General Purpose Transformer? General purpose transformers include any VA rating along with primary and secondary voltage ratings up to 600 VAC. Although internal fusing is an option, no fusing is required. However, applicable U.L. specifications may require fusing in the end product. These transformers are designed to meet the requirements of U.L. 506. What is Voltage Regulation? Voltage regulation is the percent of change in the output voltage when the load is reduced from full load to no load while the input voltage remains constant. What is the effect of a load on a control transformer? A control transformer is designed to provide rated output voltage at full VA. As the load decreases, the output voltage will go up. Conversely, increases in load will result in lower output voltages. Typically, the smaller the VA size of the unit, the greater difference there is between no-load and full-load voltage. Part Numbering System This chart illustrates a breakdown of our part numbering system on a few of our most popular models. Consult factory for your specific requirements. Typical Part No. 1. Series: 4000 = Class II (UL 1585) inherently protected or internally fused. 4001 = Class II (UL 1585) externally fused. 4100 = No UL or CSA approval. 2. Packaging: - = Bulk Pack Y = Individual Box 3. Primary and Secondary Voltages: Primary V Secondary V 01 = 120 24 09 = 02 = 240 24 13 = 03 = 277 24 20 = 04 = 480 24 51 = 05 = 120/208/240 24 78 = 4. VA and Series Dimension: VA Rating Series Size A= 10 3/4" (19.05mm) AW = C= 20 3/4" (19.05mm) L= M= 30 3/4" (19.05mm) J= E= 40 7/8" (22.22 mm) K= V= 40 3/4" (19.05mm) Z= 5. Stack Thickness and Fusing (Generally determined at factory): 19 = 0.5" (12.7mm) thick. 07 = 0.875" (22.225mm) thick. 02 = 0.625" (15.875mm) thick. 04 = 1.00" (25.4mm) thick. 6. Mounting and Termination: Mounting Termination K= Foot Mount Leads AE = BC = 4" (101.6mm)foot Screw / Leads BB = G= Panel Mount Leads AB = 7. Customer ID Suffix: 000-999 = Factory assigned customer ID B 4000 - 01 E 07 BB 999 4500 = Autotransformer. 4600 = 60 Hz. only 4700 = General Purpose (UL 506). Primary V 208/240 208/240/480 120 380/415 575 Secondary V 24 24 12 24 24 VA Rating 50 60 75 100 150 Series Size 7/8" (22.22 mm) 15/16" (23.81mm) 15/16" (23.81mm) 1 1/4" (31.75mm) 1 1/4" (31.75mm) 15 = 1.00" (25.4mm) thick. 18 = 1.25" (31.75mm) thick. Mounting Foot Mount Foot Mount Foot Mount Termination QCs on Top QCs on One Side QCs on Other Side Example: 4000-01E07BB999 This part number is a Class II transformer with a 120V primary and 24V secondary. It is 40VA and inherently energy limited. This is a foot mount transformer with quick connect terminals (line & load) exiting out of the same side of the transformer cover. Note: This is a partial listing only. Consult factory for your specific requirements. All combinations of voltage and VA may not be available. Dimensions are shown for 202 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Custom Transformer Capabilities In addition to our industry leading standard transformer series (see the following pages), We have a proven track record of being an innovative leader in custom transformer designs. We specialize in working with our customers in the initial stages of their design process, offering ideas and suggestions which lead to a transformer product that can be manufactured with the lowest Defective Parts Per Million (DPPM) levels and at the highest value to the customer. The following is a list of guidelines for transformer products which compliment our Demand Flow Manufacturing system. Leaded Transformers - Quick Connect Transformers - PC Mount Transformers - Inductors * 5 VA through 400 VA * Spray on rust preventative * Butt stack and weld lamination construction * Molded bobbin construction * Numerous welded bracket options * Molded cover with integral strain relief for lead or quick connect terminal When a transformer fits the above criteria and the customer is willing to share in the design process with us, we can both benefit from Design For Manufacturing (DFM), as demonstrated in the following example: Traditional Method * DPPM level >2000 * 10 Week lead time * 3 Part numbers * 12 Inventory turns * Costly * Fragile design DFM Method * DPPM level <100 * 1 Week lead time * 1 Universal part number * 50 Inventory turns * 20% Cost improvement * Robust design Our electrical and mechanical design groups are ready to work with you on your specific product needs. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 203 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 5 VA - 30VA Inherently Energy Limited No Secondary Fusing Required Wire Leads File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications * Type K Foot Mount - features a steel bracket welded to the bottom of the laminations for easy mounting. * Type G Panel Mount - features .179" (4.55 mm) diameter holes in each corner to allow direct mounting to a panel. * Multiple voltage combinations are available. Consult factory for availability. Wire Size: All leads are 18 AWG stranded 2/64" (.794 mm) insulation thickness. Standard parts have 12" (305 mm) total length with 1/2" (12.7 mm) strip. Frequency: 50/60 Hz. Insulation Class: UL Class B (130C). Weight: 5VA - 10.56 oz. (300 g); 10VA - 10.88 oz. (308 g); 20VA - 14.24 oz. (404 g); 30VA - 19.2 oz. (544 g). Standard "999" Models Available Primary V Secondary V 20VA 120 24 4000-01C02K999 120 24 4000-01C02K999 For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . Partial Listing of Custom Models Primary V Secondary V 5VA 120 24 4000-01X19K* 240 24 4000-02X19K* 277 24 4000-03X19K* 480 24 4000-04X19K* 208/240 24 - 120 12 - 10VA 4000-01A19K* 4000-02A19K* 4000-03A19K* 4000-04A19K* - - 20VA 4000-01C02K* 4000-02C02K* 4000-03C02K* 4000-04C02K* 4000-09C02K* 4000-20C02K* 30VA 4000-01M04K* 4000-02M04K* 4000-03M04K* 4000-04M04K* 4000-09M04K* - * A three digit customer ID suffix will be assigned by the factory. All custom model part numbers are listed as Type K Foot Mount. To specify Type G Panel Mount, replace K in above part numbers with G. Outline Dimensions .187 DIA (4.75) 2.812 (71.42) "A" DIM. 2.25 (57.15) .22 (5.59) 1.88 (47.75) Type K Foot Mount 1.25 (31.75) 03 (.76) SEE TABLE .750 (19.05) 1.55 (39.37) "A" DIM. 1.55 (39.37) .179 DIA TYP (4.55) .218 (5.54) Type G Panel Mount 1.50 (38.1) "B" DIM. SEE TABLE 1.25 (31.75) 1.88 (47.75) "A" and "B" Dimensions "A" Dimension [inches (mm)] "B" Dimension [inches (mm)] 5 VA 1.5 (38.1) 0.5 (12.7) 10 VA 1.5 (38.1) 0.5 (12.7) 20 VA 1.625 (41.28) 0.625 (15.9) 30 VA 2.00 (50.8) 1.00 (25.4) Details regarding leads on standard models Voltage Color Length [inches (mm)] Strip Length [inches (mm)] Dimensions are shown for 204 reference purposes only. COM Black 12 (305) 0.5 (12.7) 120 White 12 (305) 0.5 (12.7) 208 Red 12 (305) 0.5 (12.7) Dimensions are in inches over (millimeters) unless otherwise specified. Primary Leads 240 Orange 12 (305) 0.5 (12.7) 277 Brown 12 (305) 0.5 (12.7) 480 Black/Red 12 (305) 0.5 (12.7) Specifications and availability subject to change. 575 Gray 12 (305) 0.5 (12.7) Secondary Leads 24 VAC Blue Yellow 12 (305) 12 (305) 0.5 (12.7) 0.5 (12.7) www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 10VA - 30VA Inherently Energy Limited No Secondary Fusing Required Quick Connect Terminals File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications * Type BB Same Side Termination - features quick connect terminals with line and load terminations on the same side of transformer. * Type AE Laydown Termination - features quick connect terminals with line and load terminations on the top of transformer. * Type AB Opposite Side Termination - features quick connect terminals with line and load terminations on opposite sides of transformer. * Multiple voltage combinations are available. Consult factory for availability. Terminals: Standard male quick connects are .250" x .032" (6.35 x .81 mm). Other available quick connects include .187" x .032" (4.75 x .81 mm) and .187" x .020" (4.75 x .51 mm). Frequency: 50/60 Hz. Insulation Class: UL Class B (130C). Weight: 10VA - 10.9 oz. (308 g); 20VA - 14.1 oz. (399 g); 30VA - 18.6 oz. (525 g). Standard "999" Models Available Partial Listing of Custom Models No standard models are offered. Primary V Secondary V 10VA 20VA 30VA 120 24 4000-01A19BB* 4000-01C02BB* 4000-01M04BB* 240 24 4000-02A19BB* 4000-02C02BB* 4000-02M04BB* 277 24 - - 4000-03M04BB* 480 24 - - 4000-04M04BB* 208/240 24 - - 4000-09M04BB* 120 12 - 4000-20C02BB* - * A three digit customer ID suffix will be assigned by the factory. To specify Type AE Laydown Termination, replace BB in above part numbers with AE. For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . 30VA 4000-01M04BB* 4000-02M04BB* 4000-03M04BB* 4000-04M04BB* 4000-09M04BB* - Outline Dimensions .187 DIA (4.75) Type BB Same Side Termination 2.812 (71.42) 1.60 (40.6) "A" DIM. .22 (5.59) 2.25 (57.15) .750 (19.05) "B" DIM. 1.88 (47.75) 1.40 (35.56) .031 (.787) 2.812 (71.42) 1.60 (40.6) 1.88 (47.75) .187 DIA (4.75) Type AE Laydown Termination 1.40 (35.56) 1.0 (2.54) "A" DIM. "B" DIM. R .375 (9.53) 2.25 (57.15) 2.812 (71.42) .187 DIA (4.75) Type AB Opposite Side Termination .048 (1.22) .22 (5.59) "A" DIM. 1.55 (39.4) "B" DIM. 2.25 (57.15) 1.88 (47.75) .750 (19.05) 1.40 (35.56) R .375 (9.53) .031 (.787) "A" and "B" Dimensions "A" Dimension [inches (mm)] "B" Dimension [inches (mm)] Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 10VA 1.50 (38.1) .50 (12.7) 20VA 1.625 (41.28) 0.625 (15.88) 30VA 2.00 (50.8) 1.00 (25.4) www.tycoelectronics.com Technical support: Refer to inside back cover. 205 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 20VA - 40VA Inherently Energy Limited No Secondary Fusing Required Plate for Electrical Box Mounting File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications * Type BC Plate Mount - mounted on a 4" (101.6mm) square plate designed to fit a standard 4" (101.6mm) square electrical box. * The line voltage is connected inside the electrical boxto the color-coded leads on the transformer. The low voltage is terminated to either 1/4" (4.75 mm) quick connects and/or #6-32 screw furnished on the secondary side. * Multiple voltage combinations are available. Consult factory for availability. Wire Size: All leads are 18 AWG stranded 2/64" (.794 mm) insulation thickness. Standard parts have 12" (305 mm) total length with 1/2" (12.7 mm) strip. Frequency: 50/60 Hz. Insulation Class: UL Class B (130C). Weight: 20VA - 19.2 oz. (544 g); 40VA - 32 oz. (906 g). Standard "999" Models Available Primary V Secondary V 20VA 120 24 4000-01C02BC999 Partial Listing of Custom Models Primary V Secondary V 20VA 120 24 4000-01C02BC* 208/240 24 4000-09C02BC* 40VA 4000-01V18BC999 For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . 40VA 4000-01V18BC* 4000-09V18BC* * A three digit customer ID suffix will be assigned by the factory. All custom model part numbers are listed as Type K Foot Mount. To specify Type G Panel Mount, replace K in above part numbers with G. Outline Dimensions 4.25 (108) "A" DIM. 3.375 (85.72) .22 (5.59) .50 (12.7) .187 (4.75) 1.55 (39.37) 4.25 (108) 3.375 (85.72) 1.25 (31.75) 1.88 (47.75) .187 (4.75) 1.187 (30.15) 2.25 (57.15) "B" DIM. 1.00 (25.4) "A" and "B" Dimensions "A" Dimension [inches (mm)] "B" Dimension [inches (mm)] 20 VA 1.625 (41.28) .625 (15.88) 40 VA 2.56 (65.02) 1.25 (31.75) Details regarding leads on standard models Voltage Color Length [inches (mm)] Strip Length [inches (mm)] Dimensions are shown for 206 reference purposes only. COM Black 12 (305) 0.5 (12.7) 120 White 12 (305) 0.5 (12.7) 208 Red 12 (305) 0.5 (12.7) Dimensions are in inches over (millimeters) unless otherwise specified. Primary Leads 240 Orange 12 (305) 0.5 (12.7) 277 Brown 12 (305) 0.5 (12.7) 480 Black/Red 12 (305) 0.5 (12.7) Specifications and availability subject to change. 575 Gray 12 (305) 0.5 (12.7) Secondary Leads 24 VAC Blue Yellow 12 (305) 12 (305) 0.5 (12.7) 0.5 (12.7) www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 40 VA - 50VA Inherently Energy Limited No Secondary Fusing Required Wire Leads File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications * Type K Foot Mount - features a steel bracket welded to the bottom of the laminations for easy mounting. * Type G Panel Mount - features .156" (3.96 mm) diameter holes in each corner to allow direct mounting to a panel. * Multiple voltage combinations are available. Consult factory for availability. Wire Size: All leads are 18 AWG stranded 2/64" (.794 mm) insulation thickness. Standard parts have 12" (305 mm) total length with 1/2" (12.7 mm) strip. Frequency: 50/60 Hz. Insulation Class: UL Class B (130C). Weight: 40VA - 24.3 oz. (600 g); 50VA - 33.6 oz. (953 g). Standard "999" Models Available Partial Listing of Custom Models Primary V Secondary V 40VA 50VA 120 24 4000-01E07K999 4000-01AW18K999 277 24 4000-03E07K999 4000-03AW18K999 480 24 4000-04E07K999 4000-04AW18K999 120/208/240 24 4000-05E07K999 - 208/240 24 4000-09E07K999 4000-09AW18K999 For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . Primary V Secondary V 40VA 40VA 50VA 120 24 4000-01V18K* 4000-01E07K* 4000-01AW18K* 240 24 4000-02V18K* 4000-02E07K* 4000-02AW18K* 277 24 4000-03V18K* 4000-03E07K* 4000-03AW18K* 480 24 4000-04V18K* 4000-04E07K* 4000-04AW18K* 120/208/240 24 - 4000-05E07K* - 208/240 24 4000-09V18K* 4000-09E07K* 4000-09AW18K* 208/240/480 24 - 4000-13E07K* - 380/415 24 4000-51V18K* 4000-51E07K* 4000-51AW18K* 575 24 4000-78V18K* 4000-78E07K* 4000-78AW18K* * A three digit customer ID suffix will be assigned by the factory. All custom model part numbers are listed as Type K Foot Mount. To specify Type G Panel Mount, replace K in above part numbers with G. Outline Dimensions .187 DIA (4.75) [1] 2.812 (71.42) [2] 3.125 (79.38) [1] 2.25 (57.15) [2] 2.625 (66.68) .22 (5.59) Type K Foot Mount "A" DIM. [1] 1.88 (47.75) [2] 2.188 (55.58) [1] 1.25 (31.75) [2] 1.44 (36.58) 03 (.76) .750 (19.05) SEE TABLE [1] 1.55 (39.37) [2] 1.813 (46.05) [1] 1.55 (39.37) [2] 1.813 (46.05) .218 (5.54) "A" DIM. "B" DIM. Type G Panel Mount [1] 1.50 (38.1) [2] 1.75 (44.45) [1] 1.88 (47.75) [2] 2.188 (55.58) [1] Applies to V18 models. [2] Applies to E07 & AW18 models. [1] 1.25 (31.75) [2] 1.44 (36.58) SEE TABLE .156 DIA TYP (3.96) "A" and "B" Dimensions "A" Dimension [inches (mm)] "B" Dimension [inches (mm)] 40 VA / V18 2.25 (57.15) 1.25 (31.75) 40 VA / E07 50 VA / AW18 2.125 (53.98) 2.56 (65.02) 0.875 (22.22) 1.25 (31.75) 575 Gray 12 (305) 0.5 (12.7) Secondary Leads 24 VAC Blue Yellow 12 (305) 12 (305) 0.5 (12.7) 0.5 (12.7) Details regarding leads on standard models Voltage Color Length [inches (mm)] Strip Length [inches (mm)] Dimensions are shown for reference purposes only. COM Black 12 (305) 0.5 (12.7) 120 White 12 (305) 0.5 (12.7) 208 Red 12 (305) 0.5 (12.7) Dimensions are in inches over (millimeters) unless otherwise specified. Primary Leads 240 Orange 12 (305) 0.5 (12.7) 277 Brown 12 (305) 0.5 (12.7) 480 Black/Red 12 (305) 0.5 (12.7) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 207 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 40VA - 50VA Inherently Energy Limited No Secondary Fusing Required Quick Connect Terminals File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications * Type BB Same Side Termination - features quick connect terminals with line and load terminations on the same side of transformer. * Type AE Laydown Termination - features quick connect terminals with line and load terminations on the top of transformer. * Type AB Opposite Side Termination - features quick connect terminals with line and load terminations on opposite sides of transformer. * Multiple voltage combinations are available. Consult factory for availability. Terminals: Standard male quick connects are .250" x .032" (6.35 x .81 mm). Other available quick connects include .187" x .032" (4.75 x .81 mm) and .187" x .020" (4.75 x .51 mm). Frequency: 50/60 Hz. Insulation Class: UL Class B (130C). Weight: 40VA - 22.4 oz. (636 g); 50VA - 35.2 oz. (999 g). Standard "999" Models Available Primary V 120 120 208/240 Partial Listing of Custom Models Secondary V 40VA 24 4000-01E07AE999 24 4000-01E07BB999 24 4000-09E07AE999 For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . Primary V 120 240 277 480 208/240 380/415 575 Secondary V 24 24 24 24 24 24 24 40VA 4000-01E07BB* 4000-02E07BB* 4000-03E07BB* 4000-04E07BB* 4000-09E07BB* 4000-51E07BB* 4000-78E07BB* 40VA 4000-01V18BB* 4000-02V18BB* 4000-03V18BB* 4000-04V18BB* 4000-09V18BB* 4000-51V18BB* 4000-78V18BB* 40VA 4000-01V18AB* 4000-02V18AB* 4000-03V18AB* 4000-04V18AB* 4000-09V18AB* 4000-51V18AB* - 50VA 4000-01AW18BB* 4000-02AW18BB* 4000-03AW18BB* 4000-04AW18BB* 4000-09AW18BB* 4000-51AW18BB* 4000-78AW18BB* * A three digit customer ID suffix will be assigned by the factory. To specify Type AE Laydown Termination, replace BB in above part numbers with AE. Outline Dimensions .187 DIA (4.75) Type BB Same Side Termination [1] 2.25 (57.15) [2] 3.125 (79.38) [1] 1.50 (38.1) [2] 1.81 (45.97) "A" DIM. .22 (5.59) [1] 2.25 (57.15) [2] 2.625 (66.68) "B" DIM. [1] 1.88 (47.75) [2] 2.188 (55.58) .750 (19.05) [1] 1.40 (35.56) [2] 1.494 (37.95) .031 (.787) [1] 2.812 (71.42) [2] 3.125 (79.38) [1] 1.50 (38.1) [2] 1.81 (45.97) .187 DIA (4.75) Type AE Laydown Termination [1] 1.40 (35.56) [2] 1.494 (37.95) 1.88 (47.75) 1.0 (2.54) "A" DIM. "B" DIM. R .375 (9.53) [1] 2.25 (57.15) [2] 2.625 (66.68) [1] 2.812 (71.42) [2] 3.125 (79.38) 1.55 (39.4) .22 (5.59) "A" DIM. "B" DIM. [1] 2.25 (57.15) [2] 2.625 (66.68) .187 DIA (4.75) Type AB Opposite Side Termination .048 (1.22) .750 (19.05) 1.40 (35.56) [1] 1.88 (47.75) [2] 2.188 (55.58) R .375 (9.53) .031 (.787) [1] Applies to V18 models. [2] Applies to E07 & AW18 models. Dimensions are shown for 208 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. "A" and "B" Dimensions "A" Dimension [inches (mm)] "B" Dimension [inches (mm)] Specifications and availability subject to change. 40 VA / V18 2.25 (57.15) 1.25 (31.75) 40 VA / E07 50 VA / AW18 2.125 (53.98) 2.56 (65.02) 0.875 (22.22) 1.25 (31.75) www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 60VA -75VA Non-Inherently Energy Limited Secondary Fusing Required Wire Leads File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications * Type K Foot Mount - features a steel bracket welded to the bottom of the laminations for easy mounting. * Type G Panel Mount - features .218" (5.54 mm) diameter holes in each corner to allow direct mounting to a panel. * For agency approval, 60 & 75VA transformers must have one of the following overcurrent protectors in series with the secondary winding: Internal fuse, integral circuit breaker. Any customer-supplied fusing or protection must be approved by the factory. * Multiple voltage combinations are available. Consult factory for availability. Wire Size: All leads are 18 AWG stranded 2/64" (.794 mm) insulation thickness. Standard parts have 12" (305 mm) total length with 1/2" (12.7 mm) strip. Frequency: 50/60 Hz. Insulation Class: UL Class B (130C). Weight: 60VA - 35.2 oz. (997 g); 75VA - 38.4 oz. (1087 g). Partial Listing of Custom Models Standard "999" Models Available Primary V 120 277 208/240 575 120/208/240/480 Secondary V 24 24 24 24 24 75VA 4000-01J15K999 4000-03J15K999 4000-09J15K999 4000-78J15K999 4000-08J15K999 For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . All 75VA standard models come with an integral circuit breaker. Primary V Secondary V 60VA 75VA 120 24 4000-01L15K* 4000-01J15K* 240 24 4000-02L15K* 4000-02J15K* 277 24 4000-03L15K* 4000-03J15K* 480 24 4000-04L15K* 4000-04J15K* 120/208/240 24 4000-05L15K* 4000-05J15K* 208/240 24 4000-09L15K* 4000-09J15K* 208/240/480 24 - 4000-13J15K* 380/415 24 - 4000-51J15K* 575 24 - 4000-78J15K* * A three digit customer ID suffix will be assigned by the factory. For Type G Panel Mount, replace K in above part numbers with G. Outline Dimensions "A" DIM. 3.562 (90.47) 3.00 (76.2) Type K Foot Mount Internally Fused "B" DIM. .22 (5.59) .187 DIA (4.75) 2.50 (63.5) 1.830 (46.48) .062 (1.57) .750 (19.05) SEE TABLE 2.106 (53.49) 3.562 (90.47) Type K Foot Mount Integral Circuit Breaker "A" DIM. 3.00 (76.2) .187 DIA (4.75) "B" DIM. SEE TABLE .22 (5.59) 1.830 (46.48) 2.50 (63.5) .062 (1.57) .750 (19.05) .830 (21.1) 2.106 (53.49) "A" DIM. .218 (5.54) 2.106 (53.49) "B" DIM. 2.0 (50.8) Type G Panel Mount 2.50 (63.5) 1.830 (46.48) .218 DIA (5.54) SEE TABLE "A" and "B" Dimensions for 60VA & 75VA Models L15K & J15K L15K & J15K J41K Internally Fused w/ Integral Circuit Breaker Standard Part "A" Dimension [inches (mm)] 2.475 (62.86) 3.25 (82.55) 3.45 (87.63) "B" Dimension [inches (mm)] 1.00 (25.4) 1.00 (25.4) 1.125 (28.58) Details regarding leads on standard models Voltage Color Length [inches (mm)] Strip Length [inches (mm)] Dimensions are shown for reference purposes only. COM Black 12 (305) 0.5 (12.7) 120 White 12 (305) 0.5 (12.7) 208 Red 12 (305) 0.5 (12.7) Dimensions are in inches over (millimeters) unless otherwise specified. Primary Leads 240 Orange 12 (305) 0.5 (12.7) 277 Brown 12 (305) 0.5 (12.7) 480 Black/Red 12 (305) 0.5 (12.7) Specifications and availability subject to change. 575 Gray 12 (305) 0.5 (12.7) Secondary Leads 24 VAC Blue Yellow 12 (305) 12 (305) 0.5 (12.7) 0.5 (12.7) www.tycoelectronics.com Technical support: Refer to inside back cover. 209 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 60VA -75VA Non-Inherently Energy Limited Secondary Fusing Required Quick Connect Terminals File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications * Type BB Same Side Termination - features quick connect terminals with line and load terminations on the same side of transformer. * Type AE Laydown Termination - features quick connect terminals with line and load terminations on the top of transformer. * For agency approval, 60 & 75VA transformers must have one of the following overcurrent protectors in series with the secondary winding: Internal fuse, integral circuit breaker. Any customer-supplied fusing or protection must be approved by the factory. * Multiple voltage combinations are available. Consult factory for availability. Terminals: Standard male quick connects are .250" x .032" (6.35 x .81 mm). Other available quick connects include .187" x .032" (4.75 x .81 mm) and .187" x .020" (4.75 x .51 mm). Frequency: 50/60 Hz. Insulation Class: UL Class B (130C). Weight: 60VA - 35.2 oz. (997 g); 75VA - 38.4 oz. (1087 g). Standard "999" Models Available Primary V 120 208/240 Secondary V 24 24 75VA 4000-01J15AE999 4000-09J15AE999 For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog. All 75VA standard models come with an integral circuit breaker. Partial Listing of Custom Models Primary V Secondary V 60VA 75VA 120 24 4000-01L15BB* 4000-01J15BB* 240 24 4000-02L15BB* 4000-02J15BB* 277 24 4000-03L15BB* 4000-03J15BB* 480 24 4000-04L15BB* 4000-04J15BB* 120/208/240 24 4000-05L15BB* 4000-05J15BB* 208/240 24 4000-09L15BB* 4000-09J15BB* 208/240/480 24 - 4000-13J15BB* 380/415 24 - 4000-51J15BB* 575 24 - 4000-78J15BB* * A three digit customer ID suffix will be assigned by the factory. For Type AE Laydown Termination, replace BB in above part numbers with AE. Outline Dimensions 3.562 (90.47) 2.10 (53.34) .22 (5.59) "A" DIM. 3.00 (76.2) "B" DIM. .187 DIA (4.75) Type BB Same Side Termination .750 (19.05) 2.50 (63.5) R .375 (9.53) 1.830 (46.48) .830 (21.1) .062 (1.57) 2.40 (61.0) 2.10 (53.34) 1.830 (46.48) .219 (5.56) 3.562 (90.47) R .375 (9.53) Type AE Laydown Termination Internally Fused 1.0 (2.54) 2.50 (63.5) "A" DIM. "B" DIM. .187 DIA (4.75) 3.00 (76.2) .062 (1.57) 1.830 (46.48) 2.40 (61.0) .219 (5.56) 3.562 (90.47) .830 (21.1) R .375 (9.53) Type AE Laydown Termination Integral Circuit Breaker 1.0 (2.54) 2.50 (63.5) .187 DIA (4.75) "A" DIM. "B" DIM. 3.00 (76.2) .062 (1.57) "A" and "B" Dimensions for 60VA & 75VA Models "A" Dimension [inches (mm)] "B" Dimension [inches (mm)] Dimensions are shown for 210 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Internally Fused 2.475 (62.86) 1.00 (25.4) w/ Integral Circuit Breaker 3.25 (82.55) 1.00 (25.4) www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4700 series UL 506 Transformer 60VA - 150VA Non-Fused Wire Leads or Quick Connects File E102980 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications * Type K Foot Mount - features wire leads and a steel bracket welded to the bottom of the laminations for easy mounting. * Type BB Same Side Termination - features quick connect terminals with line and load terminations on the same side of transformer. * Multiple voltage combinations are available. Consult factory for availability. Wire Size: All leads are 18 AWG stranded 2/64" (.794 mm) insulation thickness. Standard parts have 12" (305 mm) total length with 1/2" (12.7 mm) strip. Terminals: Standard male quick connects are .250" x .032" (6.35 x .81 mm). Other available quick connects include .187" x .032" (4.75 x .81 mm) and .187" x .020" (4.75 x .51 mm). Frequency: 50/60 Hz. Insulation Class: UL Class B (130C). Weight: 60VA - 36.8 oz. (1042 g); 100VA - 80 oz. (2270 g); 150VA - 83.2 oz. (2356 g). Standard "999" Models Available Partial Listing of Custom Models Primary V 120 120/208/240/480 Secondary V 24 24 60VA 4700-81L15K999 - Primary V Secondary V 100VA 150VA 120 24 4700-01K18K* 4700-01Z18K* 277 24 4700-03K18K* 4700-03Z18K* 480 24 4700-04K18K* 4700-04Z18K* 120/208/240/480 24 4700-08K18K* - 208/240 24 4700-09K18K* 4700-09Z18K* 208/230/460 24 4700-12K18K* - 208/240/480 24 4700-13K18K* - 400 24 4700-48K18K* 4700-48Z18K* 575 24 4700-78K18K* 4700-78Z18K* 460/575 24 4700-130K18K* 4700-130Z18K* * A three digit customer ID suffix will be assigned by the factory. 100VA - 4700-08K18K999 For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . Outline Dimensions 3.562 (90.47) 2.475 (62.87) 1.00 (25.4) 3.00 (76.2) .22 (5.59) .187 DIA (4.75) Type K Foot Mount 60VA 2.50 (63.5) 1.830 (46.48) .750 (19.05) .062 (1.57) SEE TABLE 2.106 (53.49) 3.125 (79.38) 2.53 (64.26) Type K Foot Mount 100VA 1.25 (31.75) 3.75 (95.25) .187 X R. 375 (4.75 x 9.52) 2.165 (54.99) 2.313 (58.75) 3.125 (79.38) SEE TABLE 2.875 (73.03) Voltage Color Length [inches (mm)] Strip Length [inches (mm)] Dimensions are shown for reference purposes only. COM Black 12 (305) 0.5 (12.7) 120 White 12 (305) 0.5 (12.7) 208 Red 12 (305) 0.5 (12.7) Dimensions are in inches over (millimeters) unless otherwise specified. Primary Leads 240 Orange 12 (305) 0.5 (12.7) 277 Brown 12 (305) 0.5 (12.7) 480 Black/Red 12 (305) 0.5 (12.7) Specifications and availability subject to change. 575 Gray 12 (305) 0.5 (12.7) Secondary Leads 24 VAC Blue Yellow 12 (305) 12 (305) 0.5 (12.7) 0.5 (12.7) www.tycoelectronics.com Technical support: Refer to inside back cover. 211 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 57 series Transformer Relay for HVAC Applications File E113772 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Relay Data @ 25C * Cover mounts on conventional 4" square box. * All leads terminate in the box. * Leads are 8" (203.2 mm) long with 1/2" (12.7mm ) stripped) * Standard transformer is 40VA Class II Energy Limited. Other transformers are available. * Five secondary terminations (two are hot) for thermostat connection and #6-32 screw termination is standard. Quick connects are optional. * Assembled with choice of 9100 or 9400 series relays. * Custom-built to meet customer requirements. Arrangements: 1 Form A (SPST-NO) through 2 Form C (DPDT), depending upon relay selected Rating: 9100 Series Relay: 12 FLA, 60 LRA, 15A resistive @ 125VAC; 6 FLA, 36 LRA, 15A resistive @ 240VAC; 3/4 HP @ 125/250VAC. 9400 Series Relay: 12 FLA, 60 LRA, 18A resistive @ 125VAC; 8 FLA, 48 LRA, 18A resistive @ 240VAC. Specifications Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Weight: 32 oz. (909 g) approximately Ordering Information 57 series products are custom-built. Your Tyco Electronics sales engineer will need to consult with the factory to develop a model meeting your needs. Standard part numbers listed below are more likely to be available from stock. Custom parts only. Outline Dimensions 4.25 (108) 3.375 (85.72) .50 (12.7) 2.00 (50.8) .187 (4.75) 4.25 (108) LABEL Using 9100 Series Relay 3.375 (85.72) LABEL 1.25 (31.75) .187 (4.75) 1.88 (47.75) 1.25 (31.75) 2.25 (57.15) 2.56 (65.0) 1.0 (25.4) 4.25 (108) 3.375 (85.72) .50 (12.7) 2.00 (50.8) .187 (4.75) 4.25 (108) LABEL Using 9400 Series Relay 3.375 (85.72) 1.25 (31.75) LABEL 1.25 (31.75) Dimensions are shown for 212 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. .187 (4.75) 1.88 (47.75) 2.56 (65.0) Specifications and availability subject to change. 2.25 (57.15) 1.0 (25.4) www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 LOW-SIGNAL PC BOARD RELAYS Alphanumeric Index Series Type Page 159/160 ................ Mercury-Wetted Reed Relays ............... 308 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays 301-338 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Relays with Forcibly-Guided Contacts.............. 36-79 6 Plug-in/Panel Mount General Purpose Relays................ 80-88 7 190 ....................... DPDT, THT Relay .................................. 331 D2N (V23105 ) ...... DPDT, THT Relay .................................. 333 FP2 ....................... DPDT, THT Relay .................................. 323 FT2/FU2 ................ DPDT, SMT or THT Relay ..................... 327 FX2 ....................... DPDT, THT Relay .................................. 329 IM ......................... DPDT, SMT or THT Relay ..................... 321 JWD/JWS ............. SPST-NO - DPDT, Dry Reed Relay ....... 303 MT2 ...................... DPDT, THT Relay .................................. 335 MT4 ...................... 4PDT, THT Relay ................................... 337 OL ........................ SPST-NO & DPST-NO, Dry Reed Relay 304 OMR ..................... SPST-NO & DPST-NO, Dry Reed Relay 306 OUAZ ................... SPDT, THT Relay ................................... 319 T81 ....................... SPDT, THT Relay ................................... 318 P1 (V23026) .......... SPDT, SMT or THT Relay ...................... 314 P2 (V23079) .......... DPDT, SMT or THT Relay ..................... 325 TSC ....................... SPDT, THT Relay ................................... 316 V23026 (P1) .......... SPDT, SMT or THT Relay ...................... 314 V23079 (P2) .......... DPDT, SMT or THT Relay ..................... 325 V23105 (D2N) ....... DPDT, THT Relay .................................. 333 NOTE: A question tree that may help you in selecting an appropriate low-signal relay for your application can be found on the next page. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. High Performance Relays If you need a low signal relay capable of switching up to 6Ghz or enduring challenging environments such as extreme shock, Power Relays & Definite vibration, or temperature, you should consider our CII high Purpose relays. Contactors...................... 89-131 performance There is an overview of our high performance relay product line in section 14 of this databook. 8 Latching, Impulse & Rotary Relays ............................... 149-154 9 Automotive Relays ...................... 141-148 10 Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Specifications and availability subject to change. www.tycoelectronics.com Technical support: 301 Refer to inside back cover. Catalog 1308242 Issued 3-03 LOW-SIGNAL PC BOARD RELAYS Low Signal (<3A), PC Board Relay Question Tree This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a relay for a particular application. What mounting type do you need? Through-Hole PC Board Terminals Surface Mount PC Board Terminals One Pole One Pole 159/160 Series Bridging or Non-bridging, Hg -wetted Reed Relay. V23026 (P1) Series Low Profile, Polarized. JWD/JWS Series Dry Reed Relay. OL Series Dry Reed Relay. OMR Series Dry Reed Relay. OUAZ Series Non-polarized. T81 Series Non-polarized. Two Pole IM Series Ultraminiature, Slim or Low Profile, Polarized. FT2/FU2 Series Slim, Polarized. V23079 (P2) Series Slim, Polarized. TSC Series Non-polarized. V23026 (P1) Series Low Profile, Polarized. Two Pole 190 Series Non-polarized. FP2 Series Low Profile, Polarized. FT2/FU2 Series Slim, Polarized. FX2 Series Slim, Polarized. IM Series Ultraminiature, Slim or Low Profile, Polarized. JWD Series Dry Reed Relay. MT2 Series Non-polarized. V23079 (P2) Series Slim, Polarized. V23105 (D2N) Series Non-polarized. Four Pole MT4 Series Non-polarized. Dimensions are shown for 302 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B JWD/JWS series Dual In-Line Package & Single In-Line Package Dry Reed Relays Features * * * * * File E29244 JWD has dual in-line package (DIP) configuration. (14-pin DIP) JWS has single in-line package (SIP) configuration. Low cost, dry reed reliability with various contact arrangements. Wave solderable and immersion cleanable. Optional coil suppression diode. Contact Data @ 25C Arrangements: 1 Form A (SPST - NO) on JWD & JWS. 1 Form B (SPST - NC), 1 Form C (SPDT) and 2 Form A (DPST-NO) on JWD only. Material: Ruthenium. Expected Mechanical Life: 100 million operations. Expected Electrical Life: Forms A & B Form C File LR81479 Ordering Information - Boldface items are more likely to be stocked. Resistive Load End of Life Criteria No. of Operations 20VDC, 500mA 500mV Loss 1 x 106 20VDC, 250mA 500mV Loss 20 x 106 Low Level (5VDC, 1mA) 50 Ohms 100 x 106 12VDC, 500mA 500mV Loss 1 x 106 10VDC, 10mA 50 Ohms 25 x 106 Low Level (5VDC, 1mA) 50 Ohms 100 x 106 Contact Ratings: Maximum Switched Voltage: 100VDC for Forms A & B; 28VDC for Form C. Maximum Switched Current: 500mA for all models. Maximum Switched Power:10W for Forms A & B; 3W for Form C. Initial Contact Resistance: 200 milliohms, max. at 10mA, 6VDC. Initial Dielectric Strength Between Open Contacts: 250VDC for Forms A & B; 175VDC for Form C. Between Contacts and Coil: 500VDC. Initial Insulation resistance Between Mutually Insulated Conductors: 1010 ohms at 100VDC. Coil Data @ 25C See Ordering Information table. Operate Data @ 25C Nom. ResisMust Must Max. Nom. Relay Volttance Operate Release Volt- Coil 10% Voltage Voltage age Power Part Diode age No. (VDC) (Ohms) (VDC) (VDC) (VDC) (mW) JWD (DIP units) with 1 Form A (SPST-NO) contacts rated 10W max. JWD-107-1 No 5/6 500 3.8 0.5 19 50/72 JWD-107-5 Yes 5/6 500 3.8 0.5 19 50/72 JWD-107-3 No 12 1,200 9.6 1.0 19 120 JWD-107-7 Yes 12 1,200 9.6 1.0 19 120 JWD-171-5 No 24 2,150 19.2 2.0 40 268 JWD-171-10 Yes 24 2,150 19.2 2.0 40 268 JWD (DIP units) with 2 Form A (DPST-NO) contacts rated 10W max. JWD-171-21 No 5/6 200 3.8 0.5 14 125/180 JWD-171-25 Yes 5/6 200 3.8 0.5 14 125/180 JWD-171-23 No 12 500 9.6 1.0 19 288 JWD-171-27 Yes 12 500 9.6 1.0 19 288 JWD-171-24 No 24 2,200 19.2 2.0 40 262 JWD-171-28 Yes 24 2,200 19.2 2.0 40 262 JWD (DIP units) with 1 Form B (SPST-NC) contacts rated 10W max. JWD-171-12 No 5/6 500 3.8 0.5 7 50/72 JWD-171-17 Yes 5/6 500 3.8 0.5 7 50/72 JWD-171-14 No 12 1,200 9.6 1.0 16 120 JWD-171-19 Yes 12 1,200 9.6 1.0 16 120 JWD-171-15 No 24 2,200 19.2 2.0 40 262 JWD-171-20 Yes 24 2,200 19.2 2.0 40 262 JWD (DIP units) with 1 Form C (SPDT) contacts rated 3W max. JWD-172-1 No 5/6 200 3.8 0.5 12 125/180 JWD-172-5 Yes 5/6 200 3.8 0.5 12 125/180 JWD-172-3 No 12 500 9.6 1.0 19 288 JWD-172-7 Yes 12 500 9.6 1.0 19 288 JWD-172-4 No 24 2,200 19.2 2.0 38 262 JWD-172-8 Yes 24 2,200 19.2 2.0 38 262 JWD-172-155 No 5/6 200 3.8 0.5 12 125/180 JWD-172-159 Yes 5/6 200 3.8 0.5 12 125/180 JWD-172-157 No 12 1,000 9.6 1.0 19 144 JWD-172-161 Yes 12 1,000 9.6 1.0 19 144 JWD-172-158 No 24 2,150 19.2 2.0 38 268 JWD-172-162 Yes 24 2,150 19.2 2.0 38 268 JWS (SIP units) with 1 Form A (SPST-NO) contacts rated 10W max. No Yes No Yes No Yes No Yes JWS-117-1 JWS-117-6 JWS-117-3 JWS-117-8 JWS-117-13 JWS-117-18 JWS-117-5 JWS-117-10 Operate Time (Including Bounce): 1.5 ms, max. Release Time (Including Bounce): 0.5 ms, max., for Forms A & B; 3.0 ms, max., for Form C. At or from Nominal Coil Voltage. Environmental Data 5 5 12 12 12 12 24 24 Temperature Range: -35C to +85C. Shock: 100 g, max., in three planes for 8 ms, 1/2 wave pulse. Vibration: 20 g, max., between 10 and 2,000 Hz. Outline Dimensions Mechanical Data JWD Termination: Printed circuit terminals on 0.100" (2.54mm) grid centers. Enclosure Type: Black molded epoxy package. Weight: 0.08 oz. (2.3g) approximately. .125 .010 (3.18 .254) 500 500 530 530 1,850 1,850 2,150 2,150 6 7 Wiring Diagrams (Top Views) Dia. 2 Dia. 3 +2 1 +2 1 7 6 +2 1 16 16 19 19 30 30 36 36 8 9 13 14 8 9 13 14 8 9 13 14 8 9 13 14 .600 (15.24) 4 MAX. TYP. 7 6 .012 TYP. (.3) +2 1 +2 1 .307 MAX. (7.8) 13 14 8 9 8 9 1314 1 +3 5 1 7 Note: Terminal numbers are for reference only and do not appear on relays. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Dimensions are shown for reference purposes only. 7 7 7 7 7 7 7 7 .260 MAX. (6.6) .800 MAX. (20.32) Dia. 7 7 6 5 5 5 5 5 5 6 6 6 6 6 6 .020 TYP. (.51) .100 TYP. (2.54) JWS Dia. 6 4 4 4 4 4 4 .315 (8.0) MAX. WITH TERMINALS VERTICAL MAGNET Dia. 5 50 50 272 272 78 78 268 268 3 3 3 3 3 3 Dia. 4 7 6 7 6 +2 1 7 6 Dia. 1 0.5 0.5 1.0 1.0 1.0 1.0 2.0 2.0 1 1 1 1 2 2 .300 MAX. (7.62) .770 MAX. (19.56) 1 2 3.8 3.8 9.6 9.6 9.6 9.6 19.2 19.2 Wiring Dia. No. Dimensions are in inches over (millimeters) unless otherwise specified. .020 TYP. (.51) 3 5 7 .018 TYP. (.46) .200 TYP. (5.08) Note: .010 TYP. (.25) .125 .010 (3.18 .254) Magnetic shielding may be required between relays when they are placed in very close proximity to one another. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 303 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OL series Dry Reed Relay Telecommunications, Office Machines. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data * Low cost, small package dry reed relay. * 1 Form A and 2 Form A contact arrangements. * Immersion cleanable, sealed version available. Consult factory. Voltage: 6 to 24VDC. Nominal Power: 100 mW to 270mW. Coil Temperature Rise: 30C max., at rated coil voltage. Max. Coil Power: 150% of nominal. Duty Cycle: Continuous. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO), 2 Form A (DPST-NO). Material: Rh, Ru. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 100 million operations (no load). Expected Electrical Life: 1,000,000 operations (rated load). Minimum Load: 1mA @ 1VDC. Initial Contact Resistance: 150 milliohms @ 100mA, 6VDC. Coil Data @ 20C OL Rated Coil Voltage (VDC) Nominal Current (mA) 6 9 12 24 34.3 22.5 17.1 11.4 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 175 400 700 2,100 4.20 6.30 8.40 16.80 0.60 0.90 1.20 2.40 Contact Ratings Ratings: 100A @ 5VDC, 100,000,000 operations. 1mA @ 5VDC, 50,000,000 operations. 5mA @ 5VDC, 50,000,000 operations. Operate Data 5mA @ 12VDC, 50,000,000 operations. 10mA @ 12VDC, 50,000,000 operations. 100mA @ 12VDC, 10,000,000 operations. Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 1.0 ms max. Release Time: 0.5 ms max. 100mA @ 24VDC, 7,000,000 operations. 200mA @ 24VDC, 7,000,000 operations. 400mA @ 24VDC, 5,000,000 operations. Max. Switched Voltage: AC: 120V. DC: 60V. Max. Switched Current: 0.5A. Max. Switched Power: 10VA, 10W. Environmental Data Initial Dielectric Strength Between Open Contacts: 200VDC. (1 second). Between Coil and Contacts: 3,000VDC. (1 second). Surge Voltage Between Coil and Contacts: 3,000V (10 / 160s). Temperature Range: Operating: -30C to +60C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing) Initial Insulation Resistance Mechanical Data Between Mutually Insulated Elements: 1,000M ohms min. @ 100VDCM. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Snap-on dust cover. Weight: 0.07 oz (2g) approximately. Dimensions are shown for 304 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number OEG B OL -C -1 12 H ,000 1. Basic Series: OL = Dry Reed Relay. 2. Enclosure: C = Snap-on dust cover. 3. Termination: 1 = 1 pole 2 = 2 pole 4. Coil Voltage: 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 5. Contact Rating: H = 0.1A @ 120VAC 6. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Coil Alignment Recess Coil Alignment Recess .216 (5.5) .244 (6.2) .228 (5.8) .157 (4.0) .260 (6.6) .157 (4.0) .795 .012 (20.2 .3) .795 .012 (20.2 .3) .700 .01 (17.78 .25) .700 .01 (17.78 .25) .311 .012 (7.9 .3) 2 - .1 .004 (2.54 .1) .311 .012 (7.9 .3) .200 .004 (5.08 .1) 2 Form A 1 Form A Wiring Diagrams (Bottom View) 2 Form A 1 Form A PC Board Layouts (Bottom View) 6 - .031 DIA. (.8) 4 - .031 DIA. (.8) 2 - .1 .004 (2.54 .1) .200 .004 (5.08 .1) .700 .004 (17.78 .1) 1 Form A Dimensions are shown for reference purposes only. .700 .004 (17.78 .1) 2 Form A Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 305 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OMR series Dry Reed Relay Telecommunications, Office Machines. File No. E82292 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data * Low cost, small package dry reed relay. * 1 Form A contact and 2 Form A arrangements. Voltage: 6 to 24VDC. Nominal Power: 100 mW to 280mW. Coil Temperature Rise: 30C max., at rated coil voltage. Max. Coil Power: 160% of nominal. Duty Cycle: Continuous. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO), 2 Form A (DPST-NO). Material: Rh, Ru. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 100 million operations (no load). Expected Electrical Life: 1,000,000 operations (rated load). Minimum Load: 1mA @ 1VDC. Initial Contact Resistance: 150 milliohms @ 100mA, 6VDC. Coil Data @ 20C OMR Rated Coil Voltage (VDC) Nominal Current (mA) 5/6 9 12 24 Contact Ratings 24.0 12.9 11.4 11.5 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 250 700 1,050 2,080 3.50 6.30 8.40 16.80 0.50 0.90 1.20 2.40 Ratings: 100A @ 5VDC, 100,000,000 operations. 1mA @ 5VDC, 50,000,000 operations. 5mA @ 5VDC, 50,000,000 operations. 5mA @ 12VDC, 50,000,000 operations. 10mA @ 12VDC, 50,000,000 operations. 100mA @ 12VDC, 10,000,000 operations. 100mA @ 24VDC, 7,000,000 operations. 200mA @ 24VDC, 7,000,000 operations. 400mA @ 24VDC, 5,000,000 operations. Operate Data Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 1.0 ms max. Release Time: 0.5 ms max. Max. Switched Voltage: AC: 120V. DC: 60V. Max. Switched Current: 0.5A . Max. Switched Power: 10VA, 10W. Environmental Data Initial Dielectric Strength Temperature Range: Operating: -30C to +70C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing) Between Open Contacts: 200VDC. (1 second). Between Coil and Contacts: 3,000VDC. (1 second). Surge Voltage Between Coil and Contacts: 3,000V (10 / 160s). Mechanical Data Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 100VDCM. Dimensions are shown for 306 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OMR: Open, no cover. OMR-C: Snap-on dust cover. Weight: 0.16 oz (4.5g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number OEG B OMR -C -1 12 H ,000 1. Basic Series: OMR = Dry Reed Relay. 2. Enclosure: Blank = Open, no cover. C = Snap-on dust cover. 3. Termination: 1 = 1 pole 2 = 2 pole 4. Coil Voltage: 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 5. Contact Rating: H = 0.5A @ 120VAC 6. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Open Type, 1 Form A Open Type, 2 Form A .350 (8.9) .353 (9.0) .157 (4.0) .992 (25.2) .046 (1.18) .1 (2.54) .437 (11.1) .315 (8.0) .2 (5.08) .1 (2.54) .018 x .018 (.45 x .45) .1 .004 (2.54 .1) .799 .004 20.3 .1 .157 (4.0) .992 (25.2) 2 - .024 DIA (.6) .900 (22.85) .045 (1.15) Snap-on Dust Cover Type, 1 Form A .1 (2.54) Snap-on Dust Cover type, 2 Form A .390 (9.9) .083 (2.12) .390 (9.9) .157 (4.0) 1.067 (27.1) .083 (2.12) .157 (4.0) 1.067 (27.1) .1 (2.54) .2 .390 (5.08) (9.9) .1 (2.54) .018 x .018 (.45 x .45) .1 .004 (2.54 .1) .1 (2.54) .504 (12.8) 2 - .024 DIA (.6) .9 (22.85) .8 .004 20.32 .1 Wiring Diagrams (Bottom View) 1 Form A PC Board Layout (Bottom View) .2 (5.08) 1 Form A .1 .004 (2.54 .1) .800 .004 (20.3 .1) .1 (2.54) .1 (2.54) 2 Form A .1 (2.54) 2 Form A .900 (22.85) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 4 - .035 DIA (.9) 6 - .035 DIA (.9) www.tycoelectronics.com Technical support: 307 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 159/160 series Mercury-Wetted Reed Relays Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. General Information The mercury-wetted contact relay represents one of the more sophisticated types of relays made today. The early pioneer work in mercury-wetted contact switching dates back to the 1950's, as telephone laboratory scientists sought out the "perfect contact". Mercurywetted contacts represent the nearest thing to the perfect contact yet developed, being characterized by such parameters as: bounce-free operation; very low and stable contact resistance; hermetic protection; fast operating speeds; Form C or Form D contact, action contact life measured in billions of operations. The only major weakness of a mercurywetted contact relay is the necessity to mount the relay within 30 of a vertical position, due to its position sensitivity. While there are several variations of the mercury-wetted contact relay on the market, the basic contact element has essential concepts in common. The mercury-wetted contact element consists of a glass-encapsulated nickel-iron reed with its base immersed in a pool of mercury. The free reed cantilever projects upward between sets of stationary contact electrodes, which have been glass-sealed in proper juxtaposition at the top of the glass chamber. The mercury is induced to flow up the cantilever by capillary action, wetting mercury on both the cantilever contact tip as well as the stationary contacts. Thus a mercury-to-mercury contact is maintained on both the normally-closed and normally-open contacts, and the system is self-replenishing. The 2-ampere mercury-wetted capsule is shown far left. Along with the inherent fast actuation of the capsule and excellent load-handling capacity, the mercury-wetted contacts exhibit extremely long life, as the mercury films re-establish at each closure and contact erosion is eliminated. Contact interface resistance is very low and stable, and as the mercury films are elastic, contact bounce is eliminated. A dynamic sequence of the mercury-wetted contact action is shown below. 2 Ampere Capsule While the below sequence portrays a Form D (make-before-break) contact action, a true Form C (break-before-make) contact can be provided by proper control of the mercury film dynamics and the contact electrode spacing. The mercury-wetted contact capsules generally are mounted within a coil assembly, and with appropriately mounted bias magnets, mounting base and magnetic shielded enclosures. The more popular assemblies contain one or two capsules in a convenient printed circuit mounting module. Mercury-wetted relays can be adjusted to operate with very low levels of input power, in the order of 10-20 milliwatts. Thus, power gain switching of as great as 10,000 can be realized. For all but very light contact loads, contact protection is required to limit the current or voltage rise time across the contacts. Form D Mercury-Wetted Contact Action As Seen In High-Speed Sequence (1) Mercury (shown in black) covers armature and contact points; (2) and (3) as armature moves from open to closed position, mercury filament joins both contacts momentarily; (4) ruptured mercury surfaces accelerate away from each other, providing rapid breaking action; (5) as contact surfaces join, mercury wetting dampens rebound, eliminates electrical chatter, and provides contact reliability. SPDT (Form C or Form D) Contact Specifications Material Rating (Switched Load) (Carry Load) Bridging and Transfer Time Contact Resistance Life Expectancy Mercury-wetted platinum contacts hermetically sealed in an inert atmosphere 2 amperes maximum 500 volts maximum 100 VA maximum 5 amperes maximum Not switched When operated by a single DC pulse, the bridging or transfer time will be greater than 50 microseconds, but less than 500 microseconds. 14 milliohms typical; 20 milliohms maximum Stable within 2 milliohms throughout life. 1 billion operations minimum at rated load Dimensions are shown for 308 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Mercury-Wetted Relays Contact Protection The essentially infinite life of mercury-wetted contact relays may only be realized if the requirements for suitable contact protection are observed. In that the goal is control of the rate of rise of voltage across the contacts when the circuit is opened (rather than peak transient limiting), the only suitable protection recognized is an RC network. Values of R and C may be calculated using the formula shown, or may be obtained from the direct reading nomograph. Nomograph Explanation I=Steady state current at time of circuit opening E=Open circuit voltage Find I on the ordinate scale. Read C on the scale adjacent to I. R is found at the intersection of I and E. To reduce voltage transient amplitudes, C may be increased up to 10 times calculated values. (R must be calculated value.) For I=0.5 amps or less and E=50 volts or less R may be omitted C must be calculated value Resistor Tolerances E Less than 70V 70V to 100V 100V to 150V Greater than 150V R R up to 2R 50% 10% 5% Specifications Parameter Coils Single Wound-max. ohms Double Wound-max. ohms Rating-Watts Continous Temp. Rise-C per watt Dielectric Breakdown-RMS, 60Hz Insulation Resistance-Megohms-500 VDC Capacitance-Armature to Coi pf, Typical Electrostatic Shielding-Optional Typical Operate Times-mS, 2X Must Operate Typical Release Times-mS, 2X Contact Form Available Adjustments Available Single-side-stable Bi-stable Polar 1% Balance Temperature Range 160 Series 8,600 4,275 2.0 30 1,000 1,000 9.0 yes 1-3 2.5 Form C, D 9,000 4,500 1.75 35 1,000 1,000 9.0 yes 1-3 2.5 Form C, D yes yes yes yes yes yes Operating C Storage C All types - 38.8C to + 85C All types - 65C to + 100C 2.0 Polyurethane PCB Weight-ounces Encapsulant Mounting Method Dimensions are shown for reference purposes only. 159 Series Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 0.5 Polyurethane PCB www.tycoelectronics.com Technical support: 309 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 159 series Mercury-Wetted Reed Relays Features Outline Dimensions 159 series relays are available in a Form C or Form D 2 amp contact arrangement, single or dual coil and printed circuit board terminals. Weight: 1.0 ounce Positive potential applied to the start of the winding indicated by the symbol will close the contacts shown open on the electrical schematics. For reset of bistable relays, reversed polarity must be applied. Wiring Diagrams Single Coil Note: Relay must be mounted within 30 of vertical and suitable contact protection must be used. Double Coil Part Numbering System Relay Series 160 Enclosure And Terminals 1-.625 Ht., .125 Lg. 2-.625 Ht., .156 Lg. 3-.625 Ht., .187 Lg. 4-.625 Ht., .250 Lg. Contacts And Adjustment 1-1D Single-Side-Stable 2-1D Bistable 5-1C Single-Side-Stable 6-1C Bistable 7-1C Dynamic (1%) Balanced Bistable 0-Special 0-Special Coils 1A-1Z-Single Coil 2K-2V-Double Coil 7A-7T-Single Coil 8A-8Z-Bifilar Coil 9A-9Z-Double Coil (Concentric) 1S and 2S-Special Standard Or Special 00-Standard A1-Z9-Special Customer Requirement Example: 159-151N00 is a 159 series relay, enclosure height of .625 in., pin length of .125 in., Form C contact, single-side-stable adjustment, single coil 1N, of completely standard construction. Coil Characteristics and Part Numbers One Winding Single-Side-Stable 40 Milliwatts Coils Coil Resistance (Ohms) 1A 1B 1C 1D 1E 1F 2.2 3.9 6.4 9.0 14 24 Must Operate Current (MA-DC) 116 86 67 60 47 35 Must Operate Voltage (VDC) Must Release Voltage (VDC) Form C Form D .06 .07 .09 .12 .15 .19 2.1 2.8 3.6 4.3 5.3 6.9 159-151A00 159-151B00 159-151C00 159-151D00 159-151E00 159-151F00 159-111A00 159-111B00 159-111C00 159-111D00 159-111E00 159-111F00 8.2 11 13 17 21 28 159-151G00 159-151H00 159-151J00 159-151K00 159-151L00 159-151M00 159-111G00 159-111H00 159-111J00 159-111K00 159-111L00 159-111M00 159-151N00 159-151P00 159-151Q00 159-151R00 159-151T00 159-151U00 159-151V00 159-111N00 159-111P00 159-111Q00 159-111R00 159-111T00 159-111U00 159-111V00 34 56 86 140 225 385 32 24 20 15 12 9.0 1.2 1.5 1.9 2.3 2.9 3.8 .24 .30 .39 .46 .59 .73 1N 1P 1Q 1R 1T 1U 1V 620 940 1,450 2,430 3,620 5,500 8,600 7.0 5.8 4.8 3.6 2.9 2.5 2.0 4.8 6.0 7.7 9.7 12 15 19 .95 1.2 1.6 2.0 2.3 3.0 3.8 Dimensions are shown for Part Number .28 .37 .47 .60 .72 .93 1G 1H 1J 1K 1L 1M 310 reference purposes only. Maximum Voltage (VDC) Dimensions are in inches over (millimeters) unless otherwise specified. 35 43 54 70 85 105 130 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 159 Series (continued) - Coil Characteristics and Part Numbers Two Windings Single-Side-Stable 80 Milliwatts Per Winding Coils Coil Resistance (Ohms) 2K 2L 2M 2N 2P 70/70 115/115 190/190 325/325 490/490 2Q 2R 2T 2U 2V 730/730 1250/1250 1860/1860 2760/2760 4275/4275 Must Operate Current (MA-DC) (Either Winding) 30 23 18 14 12 9.6 7.2 5.8 5.0 3.9 Part Number Must Operate Voltage (VDC) (Either Winding) Must Release Voltage (VDC) (Either Winding) Maximum Voltage (VDC) (Either Winding) Dielectric Stand Off Between Coils (VDC) Form C Form D 2.3 3.0 3.8 5.0 6.2 .47 .60 .79 1.0 1.3 12 15 19 26 31 500 500 400 400 400 159-152K00 159-152L00 159-152M00 159-152N00 159-152P00 159-112K00 159-112L00 159-112M00 159-112N00 159-112P00 1.6 2.0 2.5 3.0 3.8 38 50 61 74 92 400 400 200 200 200 159-152Q00 159-152R00 159-152T00 159-152U00 159-152V00 159-112Q00 159-112R00 159-112T00 159-112U00 159-112V00 7.7 10 12 15 18 Two Windings Single-Side-Stable 40 Milliwatts Per Winding 2K 2L 2M 2N 2P 70/70 115/115 190/190 325/325 490/490 2Q 2R 2T 2U 2V 730/730 1250/1250 1860/1860 2760/2760 4275/4275 15 12 9.0 7.0 5.8 .30 .37 .47 .62 .77 1.2 1.5 1.9 2.5 3.1 12 15 19 26 31 500 500 400 400 400 159-162K00 159-162L00 159-162M00 159-162N00 159-162P00 159-122K00 159-122L00 159-122M00 159-122N00 159-122P00 4.8 3.6 3.0 2.5 2.0 .97 1.2 1.5 1.8 2.3 3.9 5.0 6.0 7.5 9.2 38 50 61 74 92 400 400 200 200 200 159-162Q00 159-162R00 159-162T00 159-162U00 159-162V00 159-122Q00 159-122R00 159-122T00 159-122U00 159-122V00 Two Windings Bifilar Windings Bistable 40 Milliwatts Per Winding 8A 8B 8C 8D 8E 135/135 170/170 200/200 310/310 460/460 8F 8G 8H 8J 8K 675/675 810/810 1000/1000 1240/1240 2300/2300 16 15.5 13.3 11.9 7.8 6.5 6.85 6.75 5.6 3.82 .48 .58 .58 .82 .80 2.4 2.9 2.9 4.1 4.0 16.4 18.5 20.0 24.9 30.3 500 400 400 400 400 159-168A00 159-168B00 159-168C00 159-168D00 159-168E00 159-128A00 159-128B00 159-128C00 159-128D00 159-128E00 .96 1.2 1.5 1.4 1.9 4.8 6.1 7.4 7.0 9.7 36.7 40.2 44.7 49.8 67.8 400 400 400 400 200 159-168F00 159-168G00 159-168H00 159-168J00 159-168K00 159-128F00 159-128G00 159-128H00 159-128J00 159-128K00 Note: All values at 25C. Resistances specified are 10%. Maximum voltages based on 2 watts continuous dissipation. One Winding Single-Side-Stable 115 Milliwatts And Bistable 25 Milliwatts Single-Side-Stable Nominal Must Operate Must Operate Resistance Voltage Current (Ohms) (VDC) (MA-DC) Must Release Voltage (VDC) Bistable Part Number Maximum Voltage (VDC) Form C Form D Must Operate Must Operate Current Voltage (MA-DC) (VDC) Must Release Voltage (VDC) Part Number Form C Form D 159-127A00 159-127B00 159-127C00 159-127D00 159-127E00 18 65 85 90 115 66.6 37.4 33.3 37.7 30.0 1.3 2.7 3.1 3.8 3.8 .18 .36 .42 .51 .51 6.0 11.4 13.0 13.4 15.1 159-157A00 159-157B00 159-157C00 159-157D00 159-157E00 159-117A00 159-117B00 159-117C00 159-117D00 159-117E00 31.2 17.8 15.6 17.6 14.0 .12 .26 .30 .36 .36 .62 1.3 1.5 1.8 1.8 159-167A00 159-167B00 159-167C00 159-167D00 159-167E00 275 450 675 940 950 17.0 12.9 11.6 10.1 12.1 5.2 6.4 8.6 10.5 12.7 .77 .85 1.1 1.4 1.7 23.4 30.0 36.7 43.3 43.6 159-157F00 159-157G00 159-157H00 159-157J00 159-157K00 159-117F00 159-117G00 159-117H00 159-117J00 159-117K00 8.0 6.0 5.4 4.7 5.7 .50 .60 .80 .98 1.2 2.5 3.0 4.0 4.9 6.0 159-167F00 159-127F00 159-167G00 159-127G00 159-167H00 159-127H00 159-167J00 159-127J00 159-167K00 159-127K00 1250 1425 1800 1950 2400 4000 4000 9.4 8.3 9.4 7.5 7.35 5.55 12.9 13 18.6 17.6 20.6 24.4 17.6 1.8 1.8 2.6 2.1 2.6 3.3 2.4 50.0 53.4 60.0 62.4 69.2 89.5 89.5 159-157L00 159-157M00 159-157N00 159-157P00 159-157Q00 159-157R00 159-157T00 159-117L00 159-117M00 159-117N00 159-117P00 159-117Q00 159-117R00 159-117T00 4.4 3.9 4.4 3.5 3.4 2.6 1.9 1.2 1.2 1.7 1.5 1.8 2.3 1.6 6.1 6.2 8.8 7.5 9.0 159-167L00 159-167M00 159-167N00 159-167P00 159-167Q00 159-167R00 159-167T00 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 8.3 159-127L00 159-127M00 159-127N00 159-127P00 159-127Q00 159-127R00 159-127T00 www.tycoelectronics.com Technical support: 311 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 160 series Mercury-Wetted Reed Relays Features Outline Dimensions 160 series relays are available in a single Form C or Form D two ampere contact arrangement, single or dual coil and printed circuit board terminals. The part numbers shown on the adjacent page are for relays with 0.093" terminal spacing. The part number designator for the 0.100" grid is a 1603XXXXX for a pin of 0.09" length, and 160-4XXXXX for a pin of 0.125" length. Positive potential applied to the start of the winding indicated by the symbol will close the contacts shown open on the electrical schematics. For reset of bistable relays, reversed polarity must be applied. Weight 0.5 ounces. UL File E55708 Note: Relay must be mounted within 30 of vertical and suitable contact protection must be used. Wiring Diagrams Grid 0.093 (160-1) (160-2) Single Coil Grid 0.100 (160-3) (160-4) Double Coil Part Numbering System Relay Series 160 Enclosures And Terminals Contacts and Adjustments 1-1D Single-Side-Stable 2-1D Bistable 5-1C Single-Side-Stable 6-1C Bistable 7-1C Dynamic (1%) Balanced Bistable 0-Special 1-.090 Lg., .093 Grid 2-.125 Lg., .093 Grid 3-.090 Lg., .100 Grid 4-.125 Lg., .100 Grid 0-Special Standard or Special Coil 00-Standard A1-Z9-Special Customer Requirement 1A-1Z-Single Coil 2A-2Z-Double Coil 1S-Special Single Coil 2S-Special Double Coil Example: 160-151K00 is a 160 series relay, enclosure height of .400 in., pin length of .090 in., Form C contact, single-side-stable adjustment, single coil 1K, of completely standard construction. Coil Characteristics and Part Numbers Two Windings Bistable 20 Milliwatts Per Winding Must Not Operate Voltage (VDC) (Either Winding) Coil Resistance (Ohms) Must Operate Current (MA-DC) (Either Winding) 2K 2L 2M 2N 2P 60/60 90/90 155/155 205/205 340/340 17 15 11 10 7.5 .29 .38 .49 .61 .73 1.1 1.5 1.9 2.3 2.8 10 13 16 19 24 2Q 2R 2T 2U 2V 2W 560/560 870/870 1320/1320 1980/1980 3000/3000 4500/4500 6.0 4.7 3.8 3.2 2.7 2.1 .98 1.2 1.4 1.8 2.3 2.8 3.6 4.5 5.5 7.0 9.0 11.0 31 39 48 59 73 89 Coil Must Operate Voltage (VDC) (Either Winding) Maximum Dielectric Standoff Voltage (VDC) Between Coils (One Winding Only) (VDC) Part Number Form C Form D 500 400 400 400 400 160-162K00 160-162L00 160-162M00 160-162N00 160-162P00 160-122K00 160-122L00 160-122M00 160-122N00 160-122P00 400 200 200 200 200 200 160-162Q00 160-162R00 160-162T00 160-162U00 160-162V00 160-162W00 160-122Q00 160-122R00 160-122T00 160-122U00 160-122V00 160-122W00 Note: All values at 25C. Resistances specified are 10%. Maximum voltages based on 1.75 watts continuous dissipation. Dimensions are shown for 312 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 160 Series (continued) - Coil Characteristics and Part Numbers One Winding Single-Side-Stable 40 Milliwatts Coil Resistance (Ohms) Must Operate Current (MA-DC) 2.2 3.1 4.4 5.9 13.0 18.7 113 103 90 80 49 43 27.7 50 70 125 185 325 435 36 25 23 16 14 11 10 Must Operate Voltage (VDC) .27 .35 .43 .52 .71 .87 1.1 1.4 1.8 2.3 2.9 3.8 4.6 5.7 7.2 8.8 11 14 17 21 7.5 5.9 4.6 3.8 3.2 2.6 2.1 680 1,120 1,750 2,650 3,900 6,100 9,000 Part Number Maximum Voltage (VDC) Must Release Voltage (VDC) Form C Form D .05 .07 .08 .10 .14 .18 2.0 2.3 2.8 3.2 4.8 5.7 160-151A00 160-151B00 160-151C00 160-151D00 160-151E00 160-151F00 160-111A00 160-111B00 160-111C00 160-111D00 160-111E00 160-111F00 .22 .28 .35 .46 .60 .77 .94 7.0 9.4 11 15 18 24 28 160-151G00 160-151H00 160-151J00 160-151K00 160-151L00 160-151M00 160-151N00 160-111G00 160-111H00 160-111J00 160-111K00 160-111L00 160-111M00 160-111N00 160-151P00 160-151Q00 160-151R00 160-151T00 160-151U00 160-151V00 160-151W00 160-111P00 160-111Q00 160-111R00 160-111T00 160-111U00 160-111V00 160-111W00 1.1 1.4 1.7 2.2 2.7 3.5 4.2 35 44 55 68 83 103 125 Two Windings Single-Side-Stable 80 Milliwatts Per Winding Coil Resistance (Ohms) Must Operate Current (MA-DC) (Either Winding) Part Number Must Not Operate Voltage (VDC) (Either Winding) Must Operate Voltage (VDC) (Either Winding) Maximum Voltage (VDC) (One Winding Only) Dielectric Standoff Between Coils (VDC) Form C Form D 60/60 90/90 155/155 205/205 340/340 33 29 22 20 15 2.2 2.9 3.7 4.5 5.6 .44 .58 .74 .92 1.1 10 13 16 19 24 500 400 400 400 400 160-152K00 160-152L00 160-152M00 160-152N00 160-152P00 160-112K00 160-112L00 160-112M00 160-112N00 160-112P00 560/560 870/870 1,320/1,320 1,980/1,980 3,000/3,000 4,500/4,500 10.8 9.3 7.5 6.4 5.3 4.2 7.9 9.0 11.0 14.0 18.0 21.0 1.3 1.8 2.2 2.8 3.5 4.2 31 39 48 59 73 89 400 200 200 200 200 200 160-152Q00 160-152R00 160-152T00 160-152U00 160-152V00 160-152W00 160-112Q00 160-112R00 160-112T00 160-112U00 160-112V00 160-112W00 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 313 Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM V23026 (P1) series Miniature, Sealed PC Board Relay File E48393 File LR45064-5 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23C Features * Surface and through-hole mounting types. * 1 Form C contact arrangement. * Latching or non-latching versions available. * Switches loads from dry circuit to 1 amp. * Washable - meets IEC protection class IP67. * Low coil power requirement for IC compatibility. * Terminals arranged on 0.1" grid. * Designed for compact, high density mounting, 106.6mm2 surface area. * Ideal for data and communication systems. Contact Data @ 23C Arrangements: 1 Form C (SPDT) bifurcated contacts. Material & Style:Palladium-Nickel with Gold-Rhodium overlay. Expected Mechanical Life: 1 billion operations. Expected Electrical Life: 50 million ops. at 10mA, 12VDC; 10 million ops. at 100mA, 6VDC; 100,000 ops. at 1A, 30VDC. Contact Ratings: Maximum Switched Voltage: 125VDC, 150VAC. Maximum Switched Current: 1A. Maximum Carrying Current: 1A. Maximum Switched Power: 30W (DC), 60VA (AC). Minimum Switched Capability: 100V. UL/CSA Contact Ratings: 1A @ 30VDC; 460mA @ 65VDC; 460mA @ 150VAC. Initial Contact Resistance: 50 milliohms max. @ 10mA, 20mV. Nominal Voltage (VDC) Maximum Operating Voltage (VDC) Nominal Power (mW) Resistance (Ohms) 10% Coil Number Order Designation (Step 4 in Ordering Information chart) 36 137 370 1,165 2,250 3,100 4,500 7 6 1 5 2 3 4 28 113 313 1,013 1,800 2,813 4,500 7 6 1 5 2 3 4 Non-Latching -- Through-Hole versions (A1) 1.5 3 5 9 12 15 24 4.5 8.8 14.5 25.5 35 42 50 63 66 67 69 64 72 128 Non-Latching -- Surface-Mount versions (D1) 1.5 3 5 9 12 15 24 4 8 13.3 24 32 40 50 80 80 80 80 80 80 128 Bistable, Dual Coils -- Through-Hole and Surface-Mount versions (B1,E1) (values are the same for each coil)(1) 1.5 3 5 9 12 15. 4.25 8.55 14.75 14.75 29 29 70 69 64 68 96 150 32 130 390 1,200 1,500 1,500 7 6 1 5 2 3 Bistable, Single Coil -- Through-Hole and Surface-Mount versions (C1,F1) High Frequency Data Capacitance: Between Open Contacts: 5pF, max. Between Coil and Contacts: 6pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -30.9 db / -18.0 db. Insertion loss at 100 / 900 MHz: -0.12 db / -1.9 db. V. S. W. R. at 100 / 900 MHz: 1.06 db / 1.75 db. 1.5 3 5 9 12 15. 24 6 13 20 35 50 50 50 37 30 34 38 32 50 128 61 300 740 2,160 4,500 4,500 4,500 5 6 1 7 2 3 4 (1) The specified voltages apply with only one coil energized. Operate Data @ 23C Initial Dielectric Strength Between Open Contacts: 500V rms for 1 minute. Between Contacts and Coil: 1,500V rms for 1 minute. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 s): Between Open Contacts: 2,000V on request. Between Coil and Contacts: 2,500V. Surge Voltage Resistance per FCC 68 (10 / 160 s): Between Open Contacts: 1,500V on request. Between Coil and Contacts: 1,500V. Note: Consult factory regarding availability of models meeting high surge resistance requirements between open contacts. Initial Insulation Resistance Between Mutually Insulated Conductors: 109 ohms @ 500VDC. Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or less. Max. Continuous Thermal Load : 500mW. Operate Time (Excluding Bounce): 1 ms, typ. Operate Bounce Time: 1 ms, typ. Release Time (Excluding Bounce): 0.4 ms, typ. Set Time (Latching): 1 ms, typ. Reset Time (Latching): 1 ms, typ. Maximum Switching Rate: 200 operations/second. At or from Nominal Coil Voltage Environmental Data Temperature Range: -40C to +70C. Vibration, Operational: 40g, 10-200 Hz; 20g, 200-2000 Hz. Shock, Operational: 50g at 11 ms 1/2 sinusoidal impulse. Resistance to Soldering Heat: 260C for 10s. Internal relay temperature should not exceed 210C. Needle Flame Test: Application time 20s, burning time <15s. Coil Data @ 23C Voltage: 1.5 to 24VDC. Thermal Resistance at Continuous Thermal Load: 130K per Watt. Maximum Coil Temperature: 85C. Duty Cycle: Continuous. Dimensions are shown for 314 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: Through-hole or surface mount printed circuit terminals. Enclosure Type: Immersion cleanable, plastic sealed case. Weight: 0.063 oz. (1.8g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM Ordering Information Typical Part Number B V23026 A1 00 2 B201 1. Basic Series: V23026 = P1 Miniature, printed circuit board relay. 2. Termination: Through-Hole Surface Mount Non-Latching A1 D1 Dual Coil Latching B1 E1 Single Coil Latching C1 F1 Consult factory regarding availability of models meeting FCC Part 68/1500V surge requirement. 3. Function Type: 00 = Single Coil Non-Latching, Through-Hole terminals 05 = Single Coil Latching 4. Coil Voltage: 7 = 1.5VDC(1) 6 = 3VDC 1 = 5VDC 5 = 9VDC(1) 02 = Single Coil Non-Latching, Surface-Mount terminals 10 = Dual Coil Latching 2 = 12VDC (1) For single coil latching versions only (C1, F1), 5 =1.5VDC and 7 = 9VDC 4 = 24VDC(2) 3 = 15VDC (2) 24V coil not available on dual coil version 5. Contact Type: B201 = Bifurcated, 1 Form C (SPDT). *Consult factory for tape and reel packaging. Our authorized distributors are more likely to stock the following items for immediate delivery. V23026A1001B201 V23026A1002B201 V23026A1004B201 V23026D1021B201 V23026D1022B201 V23026D1024B201 Outline Dimensions Wiring Diagrams (Bottom Views) Through-Hole Single Coil Non-Latching & Single Coil Latching .512 MAX. (13) .30 MAX. (7.62) 1 3 + 10 8 5 .272 MAX. (6.9) INDEX MARK .012 MAX. (.3) For non-latching versions, coil polarity must be observed. For single coil latching versions, polarity shown results in "set" condition. Reverse polarity results in "reset" condition. Diagram indicates de-energized position for non-latching and "reset" position for single coil latching. .138 MAX. (3.5) Surface Mount .31 MAX. (7.9) .531 MAX. (13.5) 1 .315 MAX. (8) .016 O (.4) Dual Coil Latching .008 O (.2) 5 SET .02 (0.5) .08 MAX. (2) .06 (.15) 3 + RESET INDEX MARK 10 0/8 .41 MAX. (10.3) 8 + 6 Diagram indicates relay in the "reset" position, with "reset" coil most recently energized as shown. Energizing "set" coil as shown will transfer the contacts. PC Board Layouts (Bottom Views) Through-Hole .0315 DIA. .0 02 (.8 .05) Surface Mount .100 TYP. (2.54) .067 (1.7) .05 (1.26) .100 TYP. (2.54) INDEX MARK .3 (7.62) INDEX MARK .134 (3.4) .047 (1.2) .047 (1.2) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. .004 (.10) .100 (2.54) www.tycoelectronics.com Technical support: 315 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG TSC series Miniature, Sealed PC Board Relay Telecommunications, Appliances, Office Machines UL File No. E82292 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features * Designed for thermostat, modem, computer peripherals, video recording and security applications. * 1 Form C contact arrangement. * Low coil power requirement for IC compatibility. * Terminals arrangement on grid pattern. Contact Data @ 20C Arrangements: 1 Form C (SPDT). Material: Gold overlay Silver Nickel Alloy. Max. Switching Rate: 300ops./ min. (no load). 30ops./ min. (rated load). Expected Mechanical Life: 5 million ops (no load). Expected Electrical Life: 100,000 ops (rated load). Minimum Load: 1mA @ 1VDC. Initial Contact Resistance: 50 milliohms @ 100mA, 6VDC. Coil Data @ 20C TSC-L Sensitive Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 30.0 25.0 16.7 12.5 6.3 166 240 540 960 3,840 3.75 4.50 6.75 9.00 18.00 0.25 0.30 0.45 0.60 1.20 Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 60.0 50.0 33.4 25.0 12.5 83 120 270 480 1,920 TSC-D Standard 3.75 4.50 6.75 9.00 18.00 0.25 0.30 0.45 0.60 1.20 Contact Ratings Ratings: 1A @ 24VDC resistive. 1A @ 120VAC resistive. Max. Switched Voltage: AC: 120V. DC: 30V. Max. Switched Current: 1A. Max. Switched Power: 120VA, 24W. Operate Data @ 20C Initial Dielectric Strength Between Open Contacts: 400VAC, 50/60 Hz. (1 min.). Between Contacts and Coil: 1,000VAC, 50/60 Hz. (1 min.). Note: Consult factory for higher dielectric version: 1,500VAC, 50/60 Hz. (1 min.). Surge Voltage Between Coil and Contacts: 1,500V FCC Part 68 (10/160s). Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 5ms max. Release Time: 5ms max. Environmental Data Initial Insulation Resistance Between Mutually Insulated Conductors: 1,000Mohm @ 500VDCM. Coil Data Voltage: 5 to 24VDC. Duty Cycle: Continuous. Nominal Power: TSC-L: 150mW. TSC-D: 300mW. Max. Coil Power: TSC-L: 140% of nominal at 70C. TSC-D: 115% of nominal at 70C. Dimensions are shown for 316 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Temperature Range: Operating: -40C to +80C. Vibration,Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. Shock, Mechanical: 500m/s2 (50G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 45 to 85% RH. (Non-condensing) Mechanical Data Termination: Printed circuit terminals. Enclosure: Plastic sealed case. Weight: 0.1 oz (3g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG TSC -1 05 L 3 H ,000 1. Basic Series: TSC = Miniature relay 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12= 12VDC 4. Coil Input: L = Sensitive D = Standard 24 = 24VDC 5. Contact Material: 3 = Silver Nickel 6. Enclosure: Blank = Vented (Flux-tight) cover H = Sealed plastic case 7. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. TSC-124L3H,000 TSC-105D3H,000 TSC-105L3H,000 TSC-112L3H,000 TSC-112D3H,000 TSC-124D3H,000 Outline Dimensions Wiring Diagram (Bottom View) .390 .012 (9.9 .3) .138 (3.5) .020 .016 (.4) (.5) .300 (7.62) .016 (.4) .1 (2.54) .056 (1.43) .012 (.3) .012 (.3) .2 (5.08) PC Board Layout (Bottom View) .484 .012 (12.3 .3) 6 - 0.31 DIA (.8) .2 (5.08) .29 .012 (7.4 .3) .1 (2.54) .300 (7.62) Reference Data 270 90 250 80 Temp Rise (C) 24.0 C 60 50 40 80.0 C 30 20 40 35 230 L type 0.15W 30 210 190 170 150 25 VDC of Supplying Voltage to Coil 100 70 Load Limit Curve Ambient Temp. & Operate Voltage Coil Temperature Rise D type 0.30W 130 15 0.1 0.2 Dimensions are shown for reference purposes only. 0.3 0.4 0.5 0.6 Coil Power (W) 0.7 0.8 0.9 application field 10 90 5 Pick-Up Voltage (Cool Coil) 50 0 30 load limit curve 20 110 70 10 0 24W 0 -30 Dimensions are in inches over (millimeters) unless otherwise specified. -10 10 70 30 50 Ambient Temp. ( C) 90 0.1 Specifications and availability subject to change. 1 Contact Current (A) 10 www.tycoelectronics.com Technical support: 317 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T81N/T81H series Ultraminiature, High Density PC Board Relay File E29244 File LR48471 Features * * * * * Gold clad contacts in a 1 Form C contact arrangement. Standard 0.1" x 0.3" grid spacing in a DIP configuration. Standard or sensitive DC coils through 24 volts. High dielectric strength. Well suited for audio communications circuits, logic and process control, vending machines, thermostats and office automation applications. * Immersion cleanable, plastic sealed case. * Quiet operation for security applications. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Standard Coils Nominal Voltage (VDC) Contact Data @ 20C Arrangements: 1 Form C (SPDT). Material: Gold overlay silver-palladium alloy. Ratings: 1 amp @ 24VDC, resistive; 0.5 amp @ 120VAC, resistive. Max. Switching Current: 2A Max. Switching Power: 60VA/24W. Max. Switching Voltage: 120VAC/60VDC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 150,000 ops. @ 1A, 24VDC, resistive. 100,000 ops. @ 1A, 120VAC, resistive. Initial Contact Resistance: 50 milliohms, max., @ 100mA, 6VDC. Surge Voltage: Between Coil and Contacts (10 x 160s): 1,500V: (FCC Part 68). Initial Dielectric Strength Between Open Contacts: 500V rms, 50/60 Hz., for 1 minute. Contact to Coil: 1,000V rms, 50/60 Hz., for 1 minute. 3 5 6 9 12 24 20 55 80 180 320 1,280 Nominal Voltage (VDC) Resistance 10% (Ohms) 3 5 6 9 12 24 45 125 180 400 700 2,800 Operate Data @ 20C Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time (Excluding Bounce): Standard Coil : 5 ms, approx. Sensitive Coil : 5 ms, approx. Release Time (Excluding Bounce): All Models: 2 ms, approx. At or from Nominal Coil Voltage. Initial Insulation Resistance Between Mutually Insulated Conductors: 108 ohms @ 500VDC, 20C and 65% relative humidity. Coil Data @ 20C Voltage: 3 through 24VDC. Nom. Power (Approx.): Std. Coil: 450 mW; Sensitive Coil: 200 mW. Maximum Power: Std. Coil: 800 mW.;Sensitive Coil: 640 mW. Temperature Rise: Std. Coil: 105C per watt, typ. Sensitive Coil: 125C per watt, typ. Maximum Coil Temperature: 105C. Duty Cycle: Continuous. Environmental Data Temperature Range: Standard Coil: -40C to +55C. Sensitive Coil: -40C to +75C. Vibration: 0.059" (1.5mm) max. excursions for 10-40 Hz. Shock: Standard Coil: 10g for 11 ms. Sensitive Coil: 6g for 11 ms. Mechanical Data Termination: Printed circuit terminals on 0.1" (2.54mm) centers. Enclosure: Sealed PBT plastic case. Weight: 0.14 oz. (4g) approximately. Outline Dimensions Ordering Information Typical Part Number B Sensitive Coils Resistance 10% (Ohms) T81 H 5 D 3 1 2 -12 .429 MAX. (10.9) 1. Basic Series: T81 = Ultraminiature, PC board relay. .626 MAX. (15.9) .460 (11.7) 2. Coil Sensitivity: N = Standard coil. H = Sensitive coil. .122 (3.10) 3. Contact Arrangement: 5 = 1 Form C (SPDT) 4. Coil Input: D = DC Voltage. Wiring Diagram (Bottom View) Terminals - #1 & 2 .023 (0.6) X .018 (0.45) 1 2 5. Dielectric Strength: 3 = High dielectric strength, UL recognized. Terminals - #11 & 12 .023 (0.6) X .016 (0.40) 6. Contact Rating: 1 = 1A @ 24VDC; 0.5A @ 120VAC. 12 11 7. Contact Material: 2 = Gold overlay silver-palladium alloy. 8. Coil Voltage: 03 = 3VDC 05 = 5VDC 06 = 6VDC 09 = 9VDC 7 Terminal - #7 .008 (0.20) X .023 (0.6) PC Board Layout (Bottom View) 12 = 12VDC 24 = 24VDC 0.04 DIA. (1.01) .299 (7.6) Our authorized distributors are more likely to stock these items. T81H5D312-05 T81H5D312-06 T81H5D312-12 T81H5D312-24 Dimensions are shown for 318 reference purposes only. T81N5D312-05 T81N5D312-12 T81N5D312-24 Dimensions are in inches over (millimeters) unless otherwise specified. .100 (2.54) .397 (10.1) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OUAZ series Miniature, Sealed PC Board Relay Telecommunications, Appliances, Office Machines, Audio Equipment. UL File No. E82292 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * * * * * Gold overlay silver palladium alloy contact suitable for low loads. High density available on PC board due to small size. 2.54mm terminal pitch same as I.C. socket terminal pitch. Sensitive and standard coils available. Immersion cleanable, sealed version available. OUAZ-D Standard Rated Coil Voltage (VDC) Nominal Current (mA) 5 6 9 12 24 Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Gold overlay silver palladium. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 1mA @1VDC. Initial Contact Resistance: 50 milliohms @ 100mA,6VDC. Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 55 80 180 320 1,280 3.50 4.20 6.30 8.40 16.80 0.25 0.30 0.45 0.60 1.20 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 125 180 400 700 2,800 3.75 4.50 6.75 9.00 18.00 0.50 0.60 0.90 1.20 2.40 90.9 75.0 50.0 37.5 18.8 OUAZ-L Sensitive Rated Coil Voltage (VDC) Nominal Current (mA) 5 6 9 12 24 40.0 33.3 22.5 17.0 8.6 Contact Ratings Operate Data Ratings: 1A @ 24VDC resistive, 1A @ 120VAC resistive. Max. Switched Voltage: AC: 120V. DC: 60V. Max. Switched Current: 1A. Max. Switched Power: 120VA, 30W. Must Operate Voltage: OUAZ-D: 70% of nominal voltage or less. OUAZ-L: 75% of nominal voltage or less. Must Release Voltage: OUAZ-D: 5% of nominal voltage or more. OUAZ-L: 10% of nominal voltage or more. Operate Time: OUAZ-D: 5 ms max. OUAZ-L: 10 ms max. Release Time: 7 ms max. Initial Dielectric Strength Environmental Data Between Open Contacts: 500VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 1,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 1,500V FCC Part 68 (10/160s). Temperature Range: Operating: OUAZ-D: -30C to +60C OUAZ-L: -30C to +75C. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 500m/s2 (50G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing) Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Coil Data Mechanical Data Voltage: 5 to 24VDC. Nominal Power: OUAZ-D: 450 mW. OUAZ-L: 200 mW. Coil Temperature Rise: OUAZ-D: 60C max., at rated coil voltage. OUAZ-L: 25C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OUAZ-SS: Vented (Flux-tight), plastic cover. OUAZ-SH: Sealed, plastic case. Weight: 0.12 oz. (3.5g) approximately. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 319 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OUAZ -SS -1 12 L M ,900 1. Basic Series: OUAZ = Miniature, sealed PC board relay. 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 03 = 3VDC 05 = 5VDC 06 = 6VDC 09 = 9VDC 5. Coil Input: L = Sensitive D = Standard 12 = 12VDC 24 = 24VDC 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,900 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .441 .02 11.2 .5 .023 (.6) .018 (.45) .409 .02 10.4 .5 .008 (.2) .023 (.6) .016 (.40) PC Board Layout (Bottom View) .299 .008 7.6 .2 .063 (1.6) 5 - .04 DIA. (1.0) .299 (7.6) .098 .008 2.5 .2 .40 .008 10.1 .2 .098 (2.5) .397 (10.1) .606 .02 15.4 .5 Reference Data Operate Time 12 50 10 40 8 30 20 Life Expectancy 100 6 Operation (x 104) 60 Time (msec) Temp. Rise (C) Coil Temperature Rise Operate Time 4 24VDC Resistive 120VAC Resistive 10 2 10 Release Time 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 Coil Power (W) Dimensions are shown for 320 reference purposes only. 0.2 0.3 0.4 0.5 0.6 0.7 Dimensions are in inches over (millimeters) unless otherwise specified. 0.2 0.4 0.6 0.8 1.0 1.2 Contact Current (A) Coil Power (W) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM IM series DPDT Slimline and Low Profile Telecom/Signal PC Board Relays File E111441 File 169679-1079886 16501-003 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 23C * Through hole or surface mount terminals. * Meets Bellcore GR 1089, FCC Part 68 and ITU-T K20. * For applications in telecommunications, office automation, consumer electronics, medical equipment, measurement and control equipment. * Immersion cleanable, plastic sealed case. * 100mW coil for latching models, 140mW coil for non-latching. * Ultrasonic cleaning not recommended. Voltage: 1.5 to 24VDC. Nominal Power: 100mW for 1.5 - 12VDC latching models; 140mW for 1.5 - 12VDC non-latching models; 200mW for all 24VDC models. Duty Cycle: Continuous. Coil Data @ 23C Nominal Voltage (VDC) Contact Data @ 23C (except as noted) Arrangement: 2 Form C (DPDT) bifurcated contacts. Material: Stationary: Palladium-Ruthenium, gold covered. Ratings: Max. Switched Current: 2A. Max. Carry Current: 2A (at max ambient temperature. Max. Switched Voltage: 220VDC, 250VAC. Max. Switched Power: 60W DC or 62.5VA AC. UL/CSA Ratings: 250mA @ 250VAC; 2A @ 30VDC; 500mA @ 120VDC; 270mA @ 220VDC. Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. Expected Mechanical Life: 100 million operations. Expected Electrical Life: 2.5 million operations @ 10mA / 30mVDC. 2 million operations @ cable load open end. 500,000 operations @ 240mA / 125VDC, res. 500,000 operations @ 1A / 30VDC, res. 100,000 operations @ 270mA / 220VDC, res. 100,000 operations @ 2A / 30VDC, res. 100,000 operations @ 250mA / 250VDC, res. Thermoelectric potential: <10V. High Frequency Data Capacitance: Between Open Contacts: 1pF, max. Between Coil and Contacts: 2pF, max. Between Poles: 2pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -37.0 db / -18.8 db. Insertion loss at 100 / 900 MHz: -0.03 db / -0.33 db. V. S. W. R. at 100 / 900 MHz: 1.06 db / 1.49 db. Operate/Set Range Minimum Maximum Voltage Voltage (VDC) (VDC) Non-latching 1 coil versions 1.5 1.13 3 2.1 4.5 3.15 5 3.5 6 4.2 9 6.3 12 8.4 24 16.8 Latching 1 coil versions 1.5 3 4.5 5 6 9 12 24 1.13 2.25 3.38 3.75 4.5 6.75 9.0 18.0 Minimum Resistance 10% Release/Reset Voltage (Ohms) (VDC) Part Number 3.4 6.8 10.3 11.4 13.7 20.4 27.3 45.6 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 16 64 145 178 257 574 1,028 2,880 IM00 IM01 IM02 IM03 IM04 IM05 IM06 IM07 4.1 8.1 12.1 13.5 16.2 24.2 32.3 41.9 -1.13 -2.25 -3.38 -3.75 -4.5 -6.75 -9.0 -18.0 23 90 203 250 360 810 1,440 2,880 IM40 IM41 IM42 IM43 IM44 IM45 IM46 IM47 Operate Data @ 23C Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 1 ms, typ.; 3 ms, max. Reset Time [latching](at nominal voltage): 1 ms, typ.; 3 ms, max. Release Time [non-latching](without diode in parallel): 1 ms, typ.; 3 ms, max. Release Time [non-latching](with diode in parallel): 3 ms, typ.; 5 ms, max. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Maximum Switching Rate (no load): 50 operations/s. Environmental Data Initial Dielectric Strength Between Open Contacts: 1,000Vrms for 1 minute. Between Coil and Contacts: 1,800Vrms for 1 minute. Between Poles: 1,000Vrms for 1 minute. Surge Voltage Resistance per Bellcore 1089 (2 / 10 s), FCC 68 (10 / 160 s) and IEC (10 / 700 s): Between Open Contacts: 1,500V. Between Coil and Contacts: 2,500V. Between Poles: 1,500V. Temperature Range: -55C to +85C. Maximum Allowable Coil Temperature: 125C. Thermal Resistance: < 150K/W. Shock, half sinus, 11 ms: Functional: 50g. Shock, half sinus, 0.5 ms: Destructive: 500g. Vibration, 10-1000 Hz.: Functional: 20g. Needle Flame Test: Application Time 20s. Resistance to Soldering: 260C for 10s. Mechanical Data Initial Insulation Resistance Between Contact and Coil: 109 ohms or more @ 500VDC. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Through-hole printed circuit terminals or gull-wing or J-leg surface mount printed circuit terminals. Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.03 oz. (.75g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 321 Refer to inside back cover. Catalog 1308242 Issued 3-03 UI = Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current UII = Maximum continous voltage at 23 AXICOM The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = and UII tamb = tamb UI tamb UII tamb kI, kII KI * UI 23 C KIl * UIl 23 C = Ambient temperature = Minimum voltage at ambient temperature, tamb = Maximum voltage at ambient temperature, tamb = Factors (dependent on temperature), see diagram Ambient temperature tamb [C] Ordering Information See "Part Number" column in Coil Data chart on previous page for available base part numbers in the IM series. For THT versions, add the suffix "TS" to the base part number. For gull-wing SMT versions, add the suffix "GR" to the base part number. For J-leg SMT versions, add the suffix "JR" to the base part number. Packaging Information THT IM series relays are shipped in tubes of 50. There are 1,000 relays in a full carton. SMT IM series relays are shipped in reels of 1,000. There are 1,000 or 5,000 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions SMT Version w/ J Legs SMT Version w/ Gull Wings THT Version .236 .003 (6 .08) .393 .003 (10 .08) .222 - .008 (5.65 - .2) D1 D1= .126 .006 (3.2 .15) D2= .087 .006 (2.2 .15) D2 D2 .2 .004 .015 (5.08 .1) (.4) D1= .126 .006 (3.2 .15) D2= .087 .006 (2.2 .15) D2 D2 .2 .004 (5.08 .1) .015 (.4) .295 .011 (7.5 .3) PC Board Layout (Bottom View) Solder Pad Layout (Bottom Views) THT Version SMT Version w/ Gull Wings .018 .006 (.46 .15) .2 .006 (5.08 .15) .047 .006 (1.2 .15) .030 (.75) DIA. MIN. .047 .006 (1.2 .15) D1= .126 .006 (3.2 .15) D2= .087 .006 (2.2 .15) T1 T2 D2 D2 .015 (.4) T1= .110 .007 (2.8 .2) T2= .2 .004 (5.08 .1) Wiring Diagram (Bottom View) .126 .087 .087 (3.2) (2.2) (2.2) .315 .157 (8) (4) .236 (6) D1 SMT Version w/ J Legs .126 .087 .087 (3.2) (2.2) (2.2) .126 .087 .087 (3.2) (2.2) (2.2) .236 .003 (6 .08) .393 .003 (10 .08) .222 - .008 (5.65 - .2) .222 - .008 (5.65 - .2) D1 .125 (3.2) .236 .003 (6 .08) .393 .003 (10 .08) .028 .004 (.7 .1) .173 (4.4) .047 .006 (1.2 .15) .094 .252 (2.4) (6.4) .028 .004 (.7 .1) Recommended Soldering Conditions (according to CECC 00802) Vapor Phase Soldering: Temperature/Time Profile (Lead Temperature) Infrared Soldering: Temperature/Time Profile (Lead Temperature) 10 sec 20-40 sec max. 245C 215C 180C 130C forced cooling external preheating 100C 130C Solid Line: Typical Dotted Line: Process Limits Solid Line: Typical Dotted Line: Process Limits Time (s) Time (s) Dimensions are shown for 322 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. ca. 40 sec 180C Temperature C Temperature C 215C Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM FP2 series DPDT Low Profile Telecom/Signal PC Board Relays File E111441 File 169679-1079886 16501-003 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23C Features * Through hole PC board terminals. * Meets FCC Part 68 and ITU-T K20. * For applications in telecommunications, office automation, consumer electronics, medical equipment, measurement and control equipment. * Immersion cleanable, plastic sealed case. * 80mW coil for high sensitivity models, 140mW coil for sensitive types. * Ultrasonic cleaning not recommended. Contact Data @ 23C (except as noted) Arrangement: 2 Form C (DPDT) bifurcated contacts. Material: Stationary: Silver-nickel, gold covered. Ratings: Max. Switched Current: 2A. Max. Carry Current: 2A (at max ambient temperature. Max. Switched Voltage: 125VDC, 250VAC. Max. Switched Power: 30W DC or 62.5VA AC. UL/CSA Ratings: 500mA @ 50VDC; 1.25A @ 30VDC; 500mA @ 50VAC. Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. Expected Mechanical Life: 100 million operations. Expected Electrical Life: 2.5 million operations @ 10mA / 30mVDC. 2 million operations @ cable load open end. 100,000 operations @ 240mA / 125VDC. 100,000 operations @ 250mA / 250VDC. 100,000 operations @ 1.25A / 24VDC. Thermoelectric potential: <10V. High Frequency Data Capacitance: Between Open Contacts: 1pF, max. Between Coil and Contacts: 4pF, max. Between Poles: 1pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -40.2 db / -22.3 db. Insertion loss at 100 / 900 MHz: -0.03 db / -0.25 db. V. S. W. R. at 100 / 900 MHz: 1.01 db / 1.07 db. Initial Dielectric Strength Between Open Contacts: 700Vrms for 1 minute. Between Coil and Contacts: 1,000Vrms for 1 minute. Between Poles: 1,000Vrms for 1 minute. Surge Voltage Resistance per FCC 68 (10 / 160 s) and IEC (10 / 700 s): Between Open Contacts: 1,500V. Between Coil and Contacts: 1,500V. Between Poles: 1,500V. Initial Insulation Resistance Between Contact and Coil: 109 ohms or more @ 500VDC. Coil Data @ 23C Voltage: 3 to 48VDC. Nominal Power: 80-300mW depending on models. See coil data tables. Duty Cycle: Continuous. Nom. Operate/Set Range Minimum Nom. Voltage Min. Max. Release/Reset Power (VDC) Voltage Voltage Voltage (mW) (VDC) (VDC) (VDC) Non-latching 1 coil versions 3 2.1 6.8 0.3 140 4.5 3.15 10.3 0.45 140 5 3.5 11.4 0.5 140 6 4.2 13.7 0.6 140 9 6.3 20.4 0.9 140 12 8.4 27.3 1.2 140 24 16.8 45.7 2.4 200 48 33.6 67.5 4.8 300 Non-latching, sensitive 1 coil versions 3 2.25 9.0 0.3 80 4.5 3.38 13.5 0.45 80 5 3.75 15.0 0.5 80 6 4.5 18.0 0.6 80 9 6.75 27.1 0.9 80 12 9.0 36.1 1.2 80 24 18.0 54.7 2.4 140 48 36.0 72.5 4.8 260 Latching 1 coil versions 3 2.25 8.1 -2.25 100 4.5 3.375 12.1 -3.375 100 5 3.75 13.5 -3.75 100 6 4.5 16.2 -4.5 100 9 6.75 24.2 -6.75 100 12 9.0 29.0 -9.0 100 24 18.0 47.5 -18.0 150 Latching 2 coil versions 3 2.1 5.7 2.1 200 4.5 3.15 8.6 3.15 200 5 3.5 9.5 3.5 200 6 4.2 11.4 4.2 200 9 6.3 17.1 6.3 200 12 8.4 22.6 8.4 200 24 16.8 33.7 16.8 200 Resistance 10% (Ohms) Part Number 64 145 178 257 574 1,028 2,880 7,680 D3006 D3004 D3009 D3005 D3010 D3002 D3012 D3013 113 253 313 450 1,013 1,800 4,114 8,882 D3021 D3022 D3023 D3024 D3025 D3026 D3027 D3028 90 203 250 360 810 1,440 3,840 D3041 D3042 D3043 D3044 D3045 D3046 D3047 45 101 125 180 405 720 1,920 D3061 D3062 D3063 D3064 D3065 D3066 D3067 Operate Data @ 23C Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 3 ms, typ.; 4 ms, max. Reset Time [latching](at nominal voltage): 3 ms, typ.; 4 ms, max. Release Time [non-latching](w/o diode in parallel): 1 ms, typ.; 3 ms, max. Release Time [non-latching](with diode in parallel): 3 ms, typ.; 4 ms, max. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Maximum Switching Rate (no load): 50 operations/s. Environmental Data Temperature Range: -55C to +85C. Maximum Allowable Coil Temperature: 110C. Thermal Resistance: < 185K/W. Shock, half sinus, 11 ms: Functional: 50g. Shock, half sinus, 11 ms: Destructive: 1,500g. Vibration, 10-500 Hz.: Functional: 20g. Needle Flame Test: Application Time 20s. Resistance to Soldering: 260C for 10s. Mechanical Data Termination: Through-hole printed circuit terminals. Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.08 oz. (2g) approximately. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 323 Refer to inside back cover. Catalog 1308242 Issued 3-03 UI = Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current UII = Maximum continous voltage at 23 AXICOM The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = and UII tamb = tamb UI tamb UII tamb kI, kII KI * UI 23 C KIl * UIl 23 C = Ambient temperature = Minimum voltage at ambient temperature, tamb = Maximum voltage at ambient temperature, tamb = Factors (dependent on temperature), see diagram Ambient temperature tamb [C] Ordering Information See "Part Number" column in Coil Data chart on previous page for available part numbers in the FP2 series. Packaging Information FP2 series relays are shipped in tubes of 50. There are 1,000 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions PC Board Layout (Bottom View) .1 (2.54) .35 .003 (9.02 .08) .574 .003 (14.2 .08) .1 (2.54) .196 .004 (5 .1) .009 .002 (.25 .05) .02 (.5) .125 .011 (3.2 .3) .0275 .004 (.7 .1) .3 .004 (7.62 .1) .3 (7.62) .076 .004 (1.93 .1) .0335 DIA. MIN. (.85) Wiring Diagrams (Bottom Views) Non-Latching and Latching, 1 Coil Release or Reset Condition Dimensions are shown for 324 reference purposes only. Latching, 2 Coil Reset Condition Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM V23079 (P2) series 5 Amp Switching, High Dielectric DPDT Polarized FCC Part 68 PC Board Relay File E48393 File LR45064 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 23C * Surface and through hole mounting types. * Breakdown voltage between contacts and coil: 1,500Vrms. * Surge withstand between contacts and coil: 2,500V (Bellcore). * High capacity contact: 2A @ 30VDC. * 2 Form C contact arrangement. * Board space saving, vertical mount (14.6 x 7.2mm surface area). * Immersion cleanable, plastic sealed case. * Single and dual coil latching versions available. * Basic insulation (coil-to-contact) according to EN 60950 / UL 1950. * Ultrasonic cleaning is not recommended. Voltage: 3-24V. Nominal Power: 70mW-140mW, dependent on model. See chart below. Contact Data @ 23C Arrangement: 2 Form C (DPDT) bifurcated contacts. Material: Gold overlay on silver nickel. Rating: Max. Switching Voltage: 250VAC, 220VDC. Max. Switching Current: 5A. Max Carrying Current: 2A. Max Switching Power: 60W, DC; 62.5VA, AC. Min. Permissible Load: 100V. UL/CSA Rating: 1A @ 30VDC; 300mA @ 110VDC; 500mA @ 120VAC; 250mA @ 240VAC. Expected Mechanical Life: Approx. 100 million ops. Expected Electrical Life: 50 million ops. @ 10mA, 12V, 10 million ops. @ 100mA, 6V. 1 million ops. @ 1A, 30V, 500,000 ops. @ 500mA, 60V. 200,000 ops. @ 2A, 30V. Initial Contact Resistance: 50 milliohms @ 10mA, 20mV. Thermoelectric potential: <10V. Coil Resistance @ 23C 64.3 6 145 15 178 18 257 26 578 58 1,029 103 4,114 411 128 13 289 29 357 36 514 51 1,157 116 2,057 206 8,228 823 64.3 6 145 15 178 18 257 26 578 58 1,029 103 4,114 411 Operate Data @ 23C High Frequency Data Capacitance: Between Open Contacts: 2pF, max. Between Coil and Contacts: 1.5pF, max. Between Poles: 1pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -39.0 db / -20.7 db. Insertion loss at 100 / 900 MHz: -0.02 db / -0.27 db. V. S. W. R. at 100 / 900 MHz: 1.04 db / 1.40 db. Initial Dielectric Strength Between Open Contacts: 1,000Vrms for 1 minute. (1,500Vrms on request, consult factory for availability). Between Coil and Contacts: 1,500Vrms for 1 minute. (single coil relay). Between Poles: 1,000Vrms for 1 minute. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 s): Between Open Contacts: 2,000V. Between Coil and Contacts: 2,500V (single coil relay). Between Poles: 2,500V. Surge Voltage Resistance per FCC 68 (10 / 160 s): Between Open Contacts: 1,500V. Between Coil and Contacts: 1,500V (single coil relay). Between Poles: 1,500V. Initial Insulation Resistance Between Mutually Insulated Conductors: 109 ohms @ 500VDC. Dimensions are shown for reference purposes only. Operating Range @ 23C @ 85C Nominal Must Operate Max. Max. Voltage Voltage Voltage Voltage (VDC) (VDC) (VDC) (VDC) Non-Latching, 140mW Nominal Power 3 2.25 6.5 3.4 4.5 3.375 9.8 5.1 5 3.75 10.9 5.7 6 4.50 13.0 6.8 9 6.75 19.6 10.3 12 9.0 26.1 13.8 24 18.0 52.3 27.7 Single Coil Latching, 70mW Nominal Power 3 2.25 9.2 4.8 4.5 3.375 13.8 7.3 5 3.75 15.3 8.1 6 4.5 18.5 9.8 9 6.75 27.7 14.6 12 9.0 37.0 19.6 24 18.0 74.0 39.2 Dual Coil Latching, 140mW Nominal Power 3 2.25 6.5 - 4.5 3.375 9.8 - 5 3.75 10.9 - 6 4.5 13.0 - 9 6.75 19.6 - 12 9.0 26.1 - 24 18.0 52.3 - Dimensions are in inches over (millimeters) unless otherwise specified. Must Operate Voltage: 75% of nominal or less. Must Release Voltage: 10% of nominal or more. Operate Time (at nominal voltage): 3 ms, typ.; 5 ms, max. Reset Time (at nominal voltage): 3 ms, typ.; 5 ms, max. Release Time (non-latching w/o diode in parallel): 2 ms, typ.; 4 ms, max. Release Time (non-latching with diode in parallel): 4 ms, typ.; 6 ms, max. Bounce Time (at contact close): 1 ms, typ.; 3 ms, max. Maximum Switching Rate (no load): 50 operations/s. Environmental Data Temperature Range: -40C to +85C. Maximum Allowable Coil Temperature: 110C. Thermal Resistance: < 165K/W. Shock, half sinus, 11 ms: Functional: 50g. Shock, half sinus, 11 ms: Destructive: 150g. Vibration, 10-1,000 Hz.: Functional: 35g. Needle Flame Test: Application time 20s, burning time <15s. Resistance to Soldering Heat: 260C for 10s. Mechanical Data Termination: Through hole or surface mount printed circuit terminals. Mounting Position: Any. Enclosure: Immersion cleanable (IP67) plastic case. Weight: .084 oz. (2.5g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 325 Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B AXICOM V23079 A10 01 B301 1. Basic Series: V23079 = P2 Miniature, printed circuit board relay. 2. Termination: Non-Latching Normal Ht. Non-Latching Reduced Ht. Dual Coil Latching Single Coil Latching Through-Hole A10 A20(1) B12 C11 SMT Extended Terminal D10 D20(1) E12 F11 SMT Short Terminal G10 G20(1) H12 J11 3. Coil Voltage: 08 = 3VDC 11 = 4.5VDC 01 = 5VDC 02 = 6VDC 4. Contact Type: B301 = Bifurcated, 2 Form C (DPDT), Silver Nickel. 06 = 9VDC 03 = 12VDC 05 = 24VDC(2) (1) Reduced mounting height of 10.0 mm, as opposed to 10.4 mm (SMT) or 9.6 mm as opposed to 9.9 (through-hole). Non-latching only, not available with 24V coil. (2) Not available with Termination A20, D20 or G20. Our authorized distributors are more likely to stock the following items for immediate delivery. V23079A1011B301 V23079A2001B301 V23079A2003B301 V23079A2011B301 V23079D1001B301 V23079D1003B301 V23079D1005B301 V23079D1011B301 V23079D2001B301 V23079D2003B301 V23079D2011B301 Outline Dimensions Wiring Diagrams (Bottom Views) THT Single Coil Latching* and Single Coil Non-latching** .28 MAX. (7.2) .295 MAX. (7.5) .59 MAX. (15) 1 .039 MAX. (1.0) .022 (.56) MAX. .39 (9.9) MAX. SMT .41 (10.4) .122 MAX. (3.1) .020 .002 (0.5 0.05) .29 .006 (7.4 0.15) .37 .006 (9.4 0.15) .217 .006 (5.52 0.15) Short terminals Extended terminals Coil Limits UII = Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current Maximum continous voltage at 23 UI tamb = and UII tamb = tamb = UI tamb = UII tamb = kI, kII = KI * UI 1.3 4 1 5 5 6 + - - 12 10 9 8 ORIENTATION MARK (ON TOP OF RELAY) 10 9 8 7 ORIENTATION MARK (ON TOP OF RELAY) 12 All diagrams shown in de-energized or reset position. For non-latching versions, coil polarity must be observed. For single coil latching versions, polarity shown results in "set" condition. Reverse polarity results in "reset" condition. ***Note: The contact position illustrated shows the reset condition. If a positve potential is applied to terminal 1 or 7, the relay adopts the set position. Note: *Note: **Note: .100 TYP. (2.54) 0.9 KIl * UIl 23 C Ambient temperature Minimum voltage at ambient temperature, tamb Maximum voltage at ambient temperature, tamb Factors (dependent on temperature), see diagram 4 PC Board Layout (Bottom View) 1.0 23 C 3 + 1.2 1.1 The operating voltage limits UI and UII depend on the temperature according to the formula: 3 .018 (0.45) 4 2 Note: Mounting height varies dependent upon Termination type selected in step 2 of Ordering Information UI = + Dual Coil Latching*** SET .57 MAX. (14.5) RESET V23079A1001B301 V23079A1003B301 V23079A1005B301 0.8 THT 0.7 .100 TYP. (2.54) 1 3 12 10 9 8 .037 (0.95) 0.6 0.5 0.4 -40 4 0 20 40 60 80 6 .200 7 (5.08) .039 MAX. (1.0) SMT extended terminals .59 (15) .045 (1.15) -20 5 100 Ambient Temperature, tamb [C] ----- > SMT (Solder Pad) .295 .204 (7.5) (5.2) 1 3 4 5 6 12 10 9 8 7 .43 .35 (10.9) (8.9) Packaging Information .10 (2.54) THT P2 relays are shipped in tubes of 50. There are 2,000 relays in a carton. SMT P2 relays with long terminals are shipped in reels of 400, with 2,000 relays in a carton. SMT P2 relays with short terminals are shipped in reels of 500. There are 2,500 relays in a full carton. .004 (.10) .035 .004 (0.90.1) SMT short terminals Recommended Soldering Conditions (according to CECC 00802) Vapor Phase Soldering: Temperature/Time Profile (Lead Temperature) Infrared Soldering: Temperature/Time Profile (Lead Temperature) 10 sec 20-40 sec max. 245C 215C 180C 130C forced external 100C Temperature C Temperature C 215C ca. 40 sec 180C 130C Solid Line: Typical Solid Line: Typical Time (s) Dimensions are shown for 326 reference purposes only. Time (s) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM FT2/FU2 series DPDT Slim Package Telecom/Signal PC Board Relays File E111441 File 176679-1079886 16504-002 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23C Features * * * * Through hole PC board terminals. High-dielectric (>5,000 V contact-to-coil surge) version available. Meets Bellcore GR 1089 and FCC Part 68 and ITU-T K20. For applications in telecommunications, office automation, consumer electronics, medical equipment, measurement and control equipment. * Immersion cleanable, plastic sealed case. * Standard or sensitive coils for 3 - 48 VDC. * Ultrasonic cleaning not recommended. Contact Data @ 23C (except as noted) Arrangement: 2 Form C (DPDT) bifurcated contacts. Material: Stationary: Silver-nickel, gold-covered or palladium-ruthenium, gold-covered. Contact Ratings: Silver-nickel Palladium-ruthenium Max. Switched Current: 2A 2A. Max. Carry Current: 1.25A 2A (at max ambient temp.) Max. Switched Voltage: 125VDC, 250VAC 220VDC, 250VAC. Max. Switched Power: 30W DC, 62.5VA AC 60W DC, 62.5VA AC. UL/CSA Contact Ratings: 1.25A @ 125VDC; 1.25A @ 125VAC. Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. Expected Mechanical Life: 100 million operations. Expected Electrical Life: 2.5 million operations @ 10mA / 12VDC. 2 million operations @ cable load open end. 100,000 operations @ 250mA / 125VDC, res. 100,000 operations @ 250mA / 250VDC, res. 100,000 operations @ 1.25A / 24VDC, res. Thermoelectric potential: <10V. Nom. Operate/Set Range Voltage Min. Max. (VDC) Voltage Voltage (VDC) (VDC) Sensitive versions 3 2.25 4.2 4 3.0 5.7 4.5 3.38 6.4 5 3.75 7.1 6 4.5 8.5 9 6.75 12.7 12 9.0 17.0 24 18.0 33.9 48 36.0 67.9 Standard versions 3 2.25 5.2 4.5 3.38 7.8 5 3.75 8.7 6 4.5 10.4 9 6.75 15.6 12 9.0 20.8 24 18.0 40.8 48 36.0 81.6 High dielectric versions 3 2.25 4.2 5 3.75 7.1 12 9.0 17.0 24 18.0 33.9 Minimum Release Voltage (VDC) Nom. Power (mW) ResisCoil & tance Sensitivity 10% Code (Ohms) 0.3 0.4 0.45 0.5 0.6 0.9 1.2 2.4 4.8 200 200 200 200 200 200 200 240 240 45 114 101 125 180 405 720 2,400 9,600 21 29 22 23 24 25 26 27 28 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8 300 300 300 300 300 300 300 300 30 68 83 120 270 480 1,920 768 01 02 03 04 05 06 07 08 0.3 0.5 1.2 2.4 200 200 200 240 45 125 720 2,400 91 93 96 97 Part Number Structure High Frequency Data Capacitance: Between Open Contacts: 1pF, max. Between Coil and Contacts: 4pF, max. Between Poles: 1pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -30.6 db / -13.7 db. Insertion loss at 100 / 900 MHz: -0.02 db / -0.50 db. V. S. W. R. at 100 / 900 MHz: 1.02 db / 1.27 db. Initial Dielectric Strength Standard Model Between Open Contacts: 1,500Vrms for 1 minute. Between Coil and Contacts: 1,500Vrms for 1 minute. Between Poles: 1,500Vrms for 1 minute. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 s) and FCC 68 (10 / 160 s): Between Open Contacts: 2,500V. Between Coil and Contacts: 1,500V. Between Poles: 1,500V. High-Dielectric Model Between Open Contacts: 3,500Vrms for 1 minute. Between Coil and Contacts: 1,800Vrms for 1 minute. Between Poles: 1,800Vrms for 1 minute. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 s) and FCC 68 (10 / 160 s): Between Open Contacts: 5,000V. Between Coil and Contacts: 2,500V. Between Poles: 2,500V. Initial Insulation Resistance Between Contact and Coil: 109 ohms or more @ 500VDC. Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 3 ms, typ.; 5 ms, max. Release Time (w/o diode in parallel): 2 ms, typ.; 5 ms, max. Release Time (with diode in parallel): 4 ms, typ.; 5 ms, max. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Maximum Switching Rate (no load): 50 operations/s. Environmental Data Temperature Range: -55C to +85C. Maximum Allowable Coil Temperature: 125C. Thermal Resistance: < 165K/W. Shock, half sinus, 11 ms: Functional: 15g. Shock, half sinus, 11 ms: Destructive: 500g. Vibration, 10-500 Hz.: Functional: 10g. Needle Flame Test: Application Time 20s. Resistance to Soldering: 260C for 10s. Mechanical Data Coil Data @ 23C Voltage: 3 to 48VDC. Nominal Power: 200-300mW, depending on model. See coil data tables. Duty Cycle: Continuous. Dimensions are shown for reference purposes only. Operate Data @ 23C Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Through-hole printed circuit terminals. Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.12 oz. (3g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 327 Refer to inside back cover. Catalog 1308242 Issued 3-03 UI = Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current UII = Maximum continous voltage at 23 AXICOM The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = and UII tamb = tamb UI tamb UII tamb kI, kII KI * UI 23 C KIl * UIl 23 C = Ambient temperature = Minimum voltage at ambient temperature, tamb = Maximum voltage at ambient temperature, tamb = Factors (dependent on temperature), see diagram Ambient temperature tamb [C] Ordering Information See "Part Number Structure" chart on previous page for available part numbers in the FT2/FU2 series. Packaging Information FT2 relays are shipped in tubes of 50. There are 1,000 relays in a carton. FU2 relays with long terminals are shipped in reels of 400, with 2,000 relays in a carton. FU2 relays with short terminals are shipped in reels of 500. There are 2,500 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions SMT Version w/ Short Terminals SMT Version w/ Long Terminala THT Version .295 .005 (7.5 .05) .590 .005 (15.0 .05) .013 .001 (.35 .03) .590 .005 (15.0 .05) .377 .001 (9.6 .03) .02 .129 .011 (.5) (3.3 .3) .295 .005 (7.5 .05) .393 .006 (10.0 .15) .393 .006 (10.0 .15) .2 (5.08) .2 (5.08) .362 .008 (9.2 .2) .02 (.5) PC Board Layout (Bottom View) Solder Pad Layout (Bottom Views) THT Version SMT Version w/ Long Terminals .1 (2.54) .2 .35 (5.2) (8.9) .397 .2 (10.9) (5.2) .045 (1.15) .035 .0004 (0.9 .01) .045 (1.15) .0335 DIA. MIN. (.85) Wiring Diagram (Bottom View) 4 X .1 (2.54) .1 (2.54) .0439 (1.115) .2 (5.08) .295 .008 (7.5 .2) .02 (.5) SMT Version w/ Short Terminals 4 X .1 (2.54) .0476 (1.21) .296 .005 (7.6 .05) .590 .005 (15.0 .05) .035 .0004 (0.9 .01) Recommended Soldering Conditions (according to CECC 00802) Vapor Phase Soldering: Temperature/Time Profile (Lead Temperature) Infrared Soldering: Temperature/Time Profile (Lead Temperature) 10 sec 20-40 sec max. 245C 215C 180C 130C forced cooling external preheating 100C 130C Solid Line: Typical Dotted Line: Process Limits Solid Line: Typical Dotted Line: Process Limits Time (s) Time (s) Dimensions are shown for 328 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. ca. 40 sec 180C Temperature C Temperature C 215C Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM FX2 series DPDT Slim Package Telecom/Signal PC Board Relays File E111441 File 176679-1079886 16504-002 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23C Features * Through hole PC board terminals. * Meets Bellcore GR 1089 and FCC Part 68. * For applications in telecommunications, office automation, consumer electronics, medical equipment, measurement and control equipment. * Immersion cleanable, plastic sealed case. * 80mW coil for high sensitivity models, 140mW coil for sensitive types. * Ultrasonic cleaning not recommended. Contact Data @ 23C (except as noted) Arrangement: 2 Form C (DPDT) bifurcated contacts. Material: Stationary: Palladium-ruthenium. Ratings: Max. Switched Current: 2A. Max. Carry Current: 2A (at max ambient temperature.) Max. Switched Voltage: 220VDC, 250VAC. Max. Switched Power: 60W DC or 62.5VA AC. UL/CSA Ratings: 300mA @ 110VDC; 1A @ 30VDC; 500mA @ 120VAC; 250mA @ 240VAC. Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. Expected Mechanical Life: 100 million operations. Expected Electrical Life: 2.5 million operations @ 10mA / 30mVDC. 2 million operations @ cable load open end. 500,000 operations @ 250mA / 125VDC. 500,000 operations @ 1.25A / 24VDC. 500,000 operations @ 2A / 30VDC. Thermoelectric potential: <10V. High Frequency Data Capacitance: Between Open Contacts: 2pF, max. Between Coil and Contacts: 4pF, max. Between Poles: 2pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -34.0 db / -15.1 db. Insertion loss at 100 / 900 MHz: -0.03 db / -0.60 db. V. S. W. R. at 100 / 900 MHz: 1.07 db / 1.45 db. Initial Dielectric Strength Between Open Contacts: 1,800Vrms for 1 minute. Between Coil and Contacts: 1,800Vrms for 1 minute. Between Poles: 1,800Vrms for 1 minute. Surge Voltage Resistance per Bellcore GR1089 (2 / 10 s) and FCC 68 (10 / 160 s): Between Open Contacts: 2,500V. Between Coil and Contacts: 3,500V. Between Poles: 2,500V. Initial Insulation Resistance Between Contact and Coil: 109 ohms or more @ 500VDC. Coil Data @ 23C Voltage: 3 to 48VDC. Nominal Power: 80-300mW, depending on model. See coil data tables. Duty Cycle: Continuous. Nom. Operate/Set Range Minimum Nom. Voltage Min. Max. Release/Reset Power (VDC) Voltage Voltage Voltage (mW) (VDC) (VDC) (VDC) Non-latching 1 coil versions 3 2.1 6.8 0.3 140 4 2.8 7.6 0.4 140 4.5 3.15 10.3 0.45 140 5 3.5 11.4 0.5 140 6 4.2 13.7 0.6 140 9 6.3 20.4 0.9 140 12 8.4 27.3 1.2 140 24 16.8 45.7 2.4 200 48 33.6 67.5 4.8 300 Non-latching, sensitive 1 coil versions 3 2.25 9.0 0.3 80 4.5 3.38 13.5 0.45 80 5 3.75 15.0 0.5 80 6 4.5 18.0 0.6 80 9 6.75 27.1 0.9 80 12 9.0 36.1 1.2 80 24 18.0 54.7 2.4 140 48 36.0 72.5 4.8 260 Latching 1 coil versions 3 2.25 8.1 -2.25 100 4.5 3.375 12.1 -3.375 100 5 3.75 13.5 -3.75 100 6 4.5 16.2 -4.5 100 9 6.75 24.2 -6.75 100 12 9.0 29.0 -9.0 100 24 18.0 47.5 -18.0 150 Resistance 10% (Ohms) Part Number 64 114 145 178 257 574 1,028 2,880 7,680 D3206 D3207 D3204 D3209 D3205 D3210 D3202 D3212 D3213 113 253 313 450 1,013 1,800 4,114 8,882 D3221 D3222 D3223 D3224 D3225 D3226 D3227 D3228 90 203 250 360 810 1,440 3,840 D3241 D3242 D3243 D3244 D3245 D3246 D3247 Operate Data @ 23C Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 3 ms, typ.; 4 ms, max. Reset Time [latching](at nominal voltage): 3 ms, typ.; 4 ms, max. Release Time [non-latching](w/o diode in parallel): 1 ms, typ.; 3 ms, max. Release Time [non-latching](with diode in parallel): 3 ms, typ.; 4 ms, max. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Maximum Switching Rate (no load): 50 operations/s. Environmental Data Temperature Range: -55C to +85C. Maximum Allowable Coil Temperature: 110C. Thermal Resistance: < 185K/W. Shock, half sinus, 11 ms: Functional: 50g. Shock, half sinus, 11 ms: Destructive: 1,500g. Vibration, 10-500 Hz.: Functional: 20g. Needle Flame Test: Application Time 20s. Resistance to Soldering: 260C for 10s. Mechanical Data Termination: Through-hole printed circuit terminals. Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.10 oz. (2.5g) approximately. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 329 Refer to inside back cover. Catalog 1308242 Issued 3-03 UI = Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current UII = Maximum continous voltage at 23 AXICOM The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = and UII tamb = tamb UI tamb UII tamb kI, kII KI * UI 23 C KIl * UIl 23 C = Ambient temperature = Minimum voltage at ambient temperature, tamb = Maximum voltage at ambient temperature, tamb = Factors (dependent on temperature), see diagram Ambient temperature tamb [C] Ordering Information See "Part Number" column in Coil Data chart on previous page for available part numbers in the FX2 series. Packaging Information FX2 series relays are shipped in tubes of 50. There are 1,000 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions .587 .003 (14.93 .08) PC Board Layout (Bottom View) .283 .003 (7.27 .08) .1 (2.54) .421 .003 (10.7 .08) .011 .002 (.3 .05) .02 (.5) .0431 .004 (1.095 .1) .1 (2.54) .2 .004 (5.08 .1) .129 .011 (3.3 .3) .0439 .004 (1.115 .1) .0335 DIA. MIN. (.85) Wiring Diagram (Bottom View) Non-Latching and Latching, Release or Reset Condition Dimensions are shown for 330 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 190 series 2 Amp, DPDT, High Sensitivity, DIP PC Board Relay File E55708 File LR73303 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23C Features * Standard DIP configuration mates with 16-pin socket. * Meets FCC Part 68 (10/160s). * For applications in telecommunications, office automation, security devices, measurement and control equipment. * Immersion cleanable, plastic sealed case. * Standard, high and ultra-sensitive coils. * Ultrasonic cleaning not recommended. Nominal Voltage (VDC) Current 10% (mA) Maximum Voltage (VDC) Resistance 10% (Ohms) Approx. Power (mW) Standard sensitivity (Max. Voltage stated @ 65C, except 48V @ 60C) 3 5 6 9 12 24 48 Contact Data @ 23C 166.7 100.0 83.3 55.6 41.7 20.8 12.0 3.6 6.0 7.2 10.8 14.4 28.8 52.8 18 50 72 162 288 1,152 4,000 500 500 500 500 500 500 580 High sensitivity (Max. Voltage stated @ 70C) Arrangement: Bifurcated 2 Form C (DPDT) contacts. Material: Stationary: Silver, gold clad. Ratings: Max. Switched Current: 2A. Max. Carry Current: 2A. Max. Switched Voltage (at nom. voltage): 125VDC, 125VAC. Max. Switched Power: 60W DC or 62.5VA AC. Min. Switching Load: 10A, 10mVDC. Rated Load: 500mA at 125VAC. Initial Contact Resistance: 50 milliohms. Expected Mechanical Life: 15,000,000 ops at 36,000 ops/hr. Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. for 1 minute. Between Coil and Contacts: 1,000VAC 50/60 Hz. for 1 minute. Between Poles: 1,000VAC 50/60 Hz. for 1 minute. Surge Voltage Resistance per FCC 68 (10 / 160 s): Between Open Contacts: 1,500V. Between Coil and Contacts: 1,500V. Between Poles: 1,500V. 3 5 6 9 12 24 48 120.7 72.0 60.0 40.0 30.0 15.0 7.5 3.6 6.0 7.2 10.8 14.4 28.8 52.8 25 70 100 225 400 1,600 6,400 360 360 360 360 360 360 360 Ultra high sensitivity (Max. Voltage stated @ 70C) 3 5 6 9 12 24 48 50.0 30.0 25.0 16.7 12.5 8.3 6.25 4.5 7.5 9.0 13.5 18.0 36.0 72.0 60 167 240 540 960 2,880 7,680 150 150 150 150 150 200 300Ap Operate Data @ 23C Operate Voltage: 75% of nominal voltage. Release Voltage: 5% of nominal voltage. Operate Time: 7 ms, max. (3.5 ms, mean). Release Time: 3 ms, max. (0.8 ms, mean). Bounce Time: Operate: 0.5 ms, approx. Release: 3.5 ms, approx. Operating Frequency: Mechanical: 36,000 ops/hr. Electrical: 1,800 ops/hr at rated load. Environmental Data Initial Insulation Resistance Between Contact and Coil: 109 ohms or more @ 500VDC. Temperature Range: -40C to +70C. Relative Humidity Range: 35% to 85%. Shock: Functional: 200m/s2 (approx. 10g). Destructive: 1,000m/s2 (approx. 100g). Vibration: 10-55 Hz., .059 in (1.5 mm) double amplitude. Coil Data @ 23C Mechanical Data Voltage: 3 to 48VDC. Nominal Power: 150mW to 580mW. See Coil Data table for details. Duty Cycle: Continuous. Termination: DIP compatible, printed circuit terminals. Enclosure Type: Immersion cleanable plastic case. Weight: 0.21 oz. (6g) approximately. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 331 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Operational Performance Curves Maximum Switching Capacity Electrical Service Life Ambient Temp. vs. Max. Voltage Ordering Information Typical Part Number 190 -2 2 B 2 UO 1. Basic Series: 190 = Miniature PC board relay. 2. Enclosure and Terminals: 2= DIP, 16-pin package, sealed. 3. Contact Arrangement: 2= DPDT (2 form C). 4. Coil Voltage: J = 3VDC E= 5VDC A= 6VDC G= 9VDC B = 12VDC C = 24VDC D = 48VDC 5. Contact Material and Type: 2= Silver, gold clad. Bifurcated crossbar. 6. Coil Sensitivity UO = Standard sensitivity (Approx. 500-580mW). SO = High sensitivity. (Approx. 360mW) US = Ultra high sensitivity. (Approx. 150-200mW) Our authorized distributors are more likely to stock the following items for immediate delivery. 190-22B2UO 190-22C2UO 190-22E2UO Outline Dimensions Wiring Diagram (Bottom View) PC Board Layout (Bottom View) Dimensions are shown for 332 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM V23105 series 3 Amp, DPDT, High Sensitivity, DIP PC Board Relay File E48393 File LR45064-27 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23C Features * Standard DIP configuration mates with 16-pin socket. * Meets FCC Part 68 (10/160s). * For applications in telecommunications, office automation, security devices, measurement and control equipment. * Immersion cleanable, plastic sealed case. * 150mW, 200mW, 400mW or 500mW coil. * Ultrasonic cleaning not recommended. Contact Data @ 23C Arrangement: 2 Form C (DPDT) single contacts. Material: Stationary: Silver-nickel, gold overlaid. Ratings: Max. Switched Current: 3A. Max. Carry Current: 3A. Max. Switched Voltage (at nom. voltage): 220VDC, 250VAC. Max. Switched Power: 60W DC or 125VA AC. Min. Switching Load: 10mVDC. UL/CSA Ratings: 1A / 30VDC; 300mA / 100VDC; 1A / 125VAC (400 & 500mW coils only); 500mA / 125VAC (150 & 200mW coils only). Initial Contact Resistance: 100 milliohms @ 10mA / 20mV. Expected Mechanical Life: 15,000,000 ops. Expected Electrical Life: 2 million operations @ 100mA / 6VDC. 500,000 operations @ 1.0A / 30VDC. 100,000 operations @ 2.0A / 30VDC for 400mW and 500mW versions only. 300,000 operations @ 500mA / 230VAC. Thermoelectric potential: <15V. High Frequency Data Capacitance: Between Open Contacts: 1pF, max. Between Coil and Contacts: 2pF, max. Between Poles: 1.5pF, max.. RF Characteristics: Isolation at 100 / 900 MHz: -39.0 db / -20.7 db. Insertion loss at 100 / 900 MHz: -0.02 db / -0.27 db. V. S. W. R. at 100 / 900 MHz: 1.04 db / 1.40 db. Minimum Voltage (VDC) Maximum Voltage (VDC) Resistance 10% (Ohms) Coil Version Voltage Code 13.0 15.6 23.4 31.2 59.5 167 240 540 960 3,480 001 002 006 003 005 6.7 11.2 13.5 20.3 27.0 54.1 108.3 45 125 180 405 720 2,880 11,520 308 301 302 306 303 305 307 7.9 9.5 14.3 19.1 37.9 75.8 62 90 203 360 1,440 5,760 401 402 406 403 405 407 6.3 8.9 12.5 15.0 18.0 36.0 72.0 36 70 140 200 280 1,050 4,000 501 502 506 504 503 505 507 150mW versions 5 6 9 12 24 4.0 4.8 7.2 9.6 19.2 200mW versions 3 5 6 9 12 24 48 2.1 3.5 4.2 6.3 8.4 16.8 33.6 400mW versions 5 6 9 12 24 48 3.5 4.2 6.3 8.4 16.8 33.6 500mW versions 5 6 9 10 12 24 48 3.5 4.2 6.3 7.0 8.4 16.8 33.6 Operate Data @ 23C Operate Voltage: 70% of nominal voltage (80% for 150mW coil). Release Voltage: 5% of nominal voltage. Operate Time (Including Bounce): <10 ms. Release Time (Including Bounce): <10 ms. Initial Dielectric Strength Between Open Contacts: 750Vrms for 1 minute. Between Coil and Contacts: 1,000Vrms for 1 minute. Between Poles: 750Vrms for 1 minute. Surge Voltage Resistance per FCC 68 (10 / 160 s): Between Open Contacts: 1,500V. Between Coil and Contacts: 1,500V. Between Poles: 1,500V. Initial Insulation Resistance Between Contact and Coil: 109 ohms or more @ 500VDC. Environmental Data Temperature Range: 150/200mW coil: -25C to +85C. 400mW coil: -25C to +75C. 500mW coil: -25C to +60C. Maximum Allowable Coil Temperature: 105C. Thermal Resistance: < 100K/W. Shock: Functional: 10g. Destructive: 40g. Vibration, 10-55 Hz.: Functional: 10g. Needle Flame Test: Application time 20s, burning time <15s. Resistance to Soldering Heat: 260C for 10S.. Mechanical Data Coil Data @ 23C Termination: DIP compatible, printed circuit terminals. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.21 oz. (6g) approximately. Voltage: 3 to 48VDC. Nominal Power: See Coil Data table. Duty Cycle: Continuous. Dimensions are shown for reference purposes only. Nominal Voltage (VDC) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 333 Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM Ordering Information Typical Part Number B V23105-A5 4 01 A201 1. Basic Series: V23105-A5 = Miniature PC board relay. 2. Version: 0 = 150mW coil. 3 = 200mW coil. 4 = 400mW coil. 5 = 500mW coil. 3. Coil Voltage: 08 = 3VDC (150mW and 200mW coils only) 01 = 5VDC 02 = 6VDC 06 = 9VDC 04 = 10VDC (500mW coil only) 03 = 12VDC 05 = 24VDC 07 = 48VDC (not available with 150mW coil) 4. Contact Type and Material: A201 = DPDT, silver-nickel, gold overlaid. Our authorized distributors are more likely to stock the following items for immediate delivery. V23105A5401A201 V23105A5403A201 V23105A5405A201 V23105A5407A201 V23105A5001A201 V23105A5003A201 V23105A5005A201 Outline Dimensions Wiring Diagram (Bottom View) .398 MAX. (10.1) .799 MAX. (20.3) .0098 MIN. (0.25) 1 4 6 8 16 13 11 9 .45 MAX. (11.43) .016 MAX. (0.4) .028 MAX. (0.72) .138 (3.5) PC Board Layout (Bottom View) 8X 1 4 .039 + .004 DIA. (1.0 + 0.1) 6 8 .300 (7.62) 16 .300 (7.62) 13 11 9 .200 .200 (5.08) (5.08) Dimensions are shown for 334 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM MT2 series DPDT Telecom/Signal PC Board Relays File E111441 File 176679-1079886 16502-001 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23C Features * Through hole type terminals. * Meets FCC Part 68 and ITU-T K20. * For applications in telecommunications, office automation, consumer electronics, medical equipment, measurement and control equipment. * Immersion cleanable, plastic sealed case. * 150mW, 200mW, 300mW, 400mW or 550mW coil. * Ultrasonic cleaning not recommended. Contact Data @ 23C (except as noted) Arrangement: 2 Form C (DPDT) bifurcatedcontacts. Material: Stationary: Silver-nickel, gold covered. Ratings: Max. Switched Current: 2A. Max. Carry Current: 1.25A (at max ambient temperature. Max. Switched Voltage: 150VDC, 150VAC. Max. Switched Power: 30W DC or 62.5VA AC. UL/CSA Ratings: 400mA @ 125VAC; 1.25A @ 24VDC. Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. Expected Mechanical Life: 100,000,000 ops. Expected Electrical Life: 5 million operations @ 10mA / 30mVDC. 2.5 million operations @ cable load open end. 200,000 operations @ 1.25A / 24VDC, res. 200,000 operations @ 200mA / 150VDC, res. Thermoelectric potential: <10V. High Frequency Data Capacitance: Between Open Contacts: 2pF, max. Between Coil and Contacts: 4pF, max. Between Poles: 2pF, max.. RF Characteristics: Isolation at 100 / 900 MHz: -31.8 db / -14.2 db. Insertion loss at 100 / 900 MHz: -0.02 db / -0.97 db. V. S. W. R. at 100 / 900 MHz: 1.03 db / 1.31 db. Nominal Voltage (VDC) Minimum Voltage (VDC) Maximum Voltage (VDC) 150mW versions 4.5 3.2 5 3.6 6 4.3 9 6.4 12 8.6 24 174.1 48 33.1 200mW versions 4.5 2.9 5 3.3 6 3.9 9 5.9 12 7.8 24 15.6 48 31.2 300mW versions 4.5 3.1 5 3.4 12 8.25 24 16.5 48 32.5 400mW versions 4.5 2.9 5 3.3 6 3.9 9 5.9 12 7.8 24 15.6 48 31.2 550mW versions 4.5 2.9 5 3.3 6 3.9 12 7.8 24 15.6 48 31.2 Minimum Release Voltage (VDC) Resistance 10% (Ohms) Part Number 10.1 11.3 13.4 20.3 27.1 54.1 108.3 0.45 0.50 0.60 0.90 1.2 2.4 4.8 136 168 240 544 968 3,872 15,468 C 93406 C 93401 C 93427 C 93405 C 93402 C 93404 C 93404 8.7 9.7 11.6 17.5 23.3 46.7 93.4 0.45 0.5 0.6 0.9 1.2 2.4 4.8 101 125 180 405 720 2,880 11,520 C 93415 C 93416 C 93428 C 93417 C 93418 C 93419 C 93420 7.4 8.2 19.7 39.5 79.0 0.45 0.5 1.2 2.4 4.8 73 90 515 2,060 8,240 C 93433 C 93434 C 93412 C 93435 C 93436 6.1 6.9 8.2 12.4 16.5 33.0 66.0 0.45 0.5 0.6 0.9 1.2 2.4 4.8 50 63 90 203 360 1,440 5,760 C 93421 C 93422 C 93429 C 93423 C 93424 C 93425 C 93426 6.0 6.8 8.1 16.7 32.4 64.1 0.45 0.5 0.6 1.2 2.4 4.8 36 45 66 280 1,050 4,100 C 93438 C 93450 C 93437 C 93432 C 93431 C 93430 Operate Data @ 23C Initial Dielectric Strength Between Open Contacts: 700Vrms for 1 minute. Between Coil and Contacts: 1,050Vrms for 1 minute. Between Poles: 700Vrms for 1 minute. Surge Voltage: 1,500V surge per FCC Part 68 and IEC. Initial Insulation Resistance Between Contact and Coil: 109 ohms or more @ 500VDC. Environmental Data Temperature Range: -55C to +85C. Maximum Allowable Coil Temperature: 125C. Thermal Resistance: < 125K/W. Shock, half sinus, 11 ms: Functional: 50g. Destructive: 100g. Vibration, 10-500 Hz.: Functional: 10g. Needle Flame Test: Application Time 10s. Resistance to Soldering: 260C for 10s. Mechanical Data Coil Data @ 23C Termination: DIP compatible, printed circuit terminals. Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.18 oz. (5g) approximately. Voltage: 4.5 to 48VDC. Nominal Power: See Coil Data table. Duty Cycle: Continuous. Dimensions are shown for reference purposes only. Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 4 ms, typ.; 5 ms, max. Release Time (without diode in parallel): 1 ms, typ.; 3 ms, max. Release Time (with diode in parallel): 4 ms, typ.; 6 ms, max. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Maximum Switching Rate (no load): 50 operations/s. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 335 Refer to inside back cover. Catalog 1308242 Issued 3-03 UI = Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current UII = Maximum continous voltage at 23 AXICOM The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = and UII tamb = tamb UI tamb UII tamb kI, kII KI * UI 23 C KIl * UIl 23 C = Ambient temperature = Minimum voltage at ambient temperature, tamb = Maximum voltage at ambient temperature, tamb = Factors (dependent on temperature), see diagram Ambient temperature tamb [C] Ordering Information Packaging Information See "Part Number" column in Coil Data chart on previous page for available part numbers in the MT2 series. MT2 series relays are shipped in tubes of 25. There are 500 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Orientation mark Wiring Diagram (Bottom View) .393 +.002/-.0008 (10 +.05/-.02) .795 +.002/-.0008 (20.2 +.05/-.02) .021 (.55) 1 4 6 8 16 13 11 9 .433 +.004/-.008 (11 +.1/-.2) .020 (.5) .122 .011 .3 .005 (3.1 .3) (7.62 .15) PC Board Layout (Bottom View) 8X .048 .005 (1.21 .15) .047 .005 (1.19 .15) .031 DIA. MIN. (0.8) .300 (7.62) .300 (7.62) .200 .200 (5.08) (5.08) Dimensions are shown for 336 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM MT4 series 4PDT Telecom/Signal PC Board Relays File E111441 File 176679-1079886 16501-001 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 23C * Through hole type terminals. * Meets Bellcore GR 1089, FCC Part 68 and ITU-T K20. * For applications in telecommunications, office automation, consumer electronics, medical equipment, measurement and control equipment. * Immersion cleanable, plastic sealed case. * 300mW coil. * Ultrasonic cleaning not recommended. Voltage: 4.5 to 48VDC. Nominal Power: See Coil Data table. Duty Cycle: Continuous. Contact Data @ 23C (except as noted) Coil Data @ 23C Arrangement: 4 Form C (DPDT) bifurcatedcontacts. Material: Stationary: Silver-nickel, gold covered. Ratings: Max. Switched Current: 1.25A. Max. Carry Current: 1.25A (at max ambient temperature. Max. Switched Voltage: 150VDC, 150VAC. Max. Switched Power: 30W DC or 62.5VA AC. UL/CSA Ratings: 400mA @ 125VAC; 1.25A @ 24VDC. Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. Expected Mechanical Life: 100,000,000 ops. Expected Electrical Life: 10 million operations @ 10mA / 30mVDC. 5 million operations @ cable load open end. 200,000 operations @ 1.25A / 24VDC, res. 200,000 operations @ 200mA / 150VDC, res. Thermoelectric potential: <10V. Nominal Voltage (VDC) Minimum Voltage (VDC) Maximum Voltage (VDC) Minimum Release Voltage (VDC) Resistance 10% (Ohms) Part Number 67 83 270 480 1,920 7,680 C 93807 C 93801 C 93805 C 93802 C 93803 C 93804 300mW versions 4.5 5 9 12 24 48 3.2 3.6 6.4 8.6 17.1 34.1 7.8 8.65 15.6 20.8 41.6 83.2 0.45 0.5 0.9 1.2 2.4 4.8 Operate Data @ 23C High Frequency Data Capacitance: Between Open Contacts: 2pF, max. Between Coil and Contacts: 4pF, max. Between Poles: 2pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -31.2 db / -17.2 db. Insertion loss at 100 / 900 MHz: -0.05 db / -0.91 db. V. S. W. R. at 100 / 900 MHz: 1.03 db / 1.31 db. Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 4 ms, typ.; 6 ms, max. Release Time (without diode in parallel): 1 ms, typ.; 3 ms, max. Release Time (with diode in parallel): 4 ms, typ.; 6 ms, max. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Maximum Switching Rate (no load): 50 operations/s. Environmental Data Initial Dielectric Strength Between Open Contacts: 700Vrms for 1 minute. Between Coil and Contacts: 1,800Vrms for 1 minute. Between Poles: 700Vrms for 1 minute. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 s), FCC 68 (10 / 160 s) and IEC (10 / 700 s): Between Open Contacts: 1,500V. Between Coil and Contacts: 2,500V. Between Poles: 1,500V. Temperature Range: -55C to +85C. Maximum Allowable Coil Temperature: 100C. Thermal Resistance: < 105K/W. Shock, half sinus, 11 ms: Functional: 10g. Destructive: 100g. Vibration, 10-500 Hz.: Functional: 10g. Needle Flame Test: Application Time 10s. Resistance to Soldering: 260C for 10s. Mechanical Data Initial Insulation Resistance Between Contact and Coil: 109 ohms or more @ 500VDC. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: DIP compatible, printed circuit terminals. Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.25 oz. (7g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 337 Refer to inside back cover. Catalog 1308242 Issued 3-03 UI = Minimum voltage at 23 C after pre-energizing with nominal voltage without contact current UII = Maximum continous voltage at 23 AXICOM The operating voltage limits UI and UII depend on the temperature according to the formula: UI tamb = and UII tamb = tamb UI tamb UII tamb kI, kII KI * UI 23 C KIl * UIl 23 C = Ambient temperature = Minimum voltage at ambient temperature, tamb = Maximum voltage at ambient temperature, tamb = Factors (dependent on temperature), see diagram Ambient temperature tamb [C] Ordering Information Packaging Information See "Part Number" column in Coil Data chart on previous page for available part numbers in the MT4 series. MT4 series relays are shipped in tubes of 25. There are 500 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Orientation mark Wiring Diagram (Bottom View) .795 .004 (20.0 .1) .031 (.8) .582 .004 (14.8 .1) .433 +.004/-.008 (11 +.1/-.2) .020 (.5) .122 .011 (3.1 .3) .5 .005 (12.7 .15) PC Board Layout (Bottom View) .1 TYP. (2.54) .048 .005 (1.21 .15) .5 .1 TYP. (12.7) (2.54) .041 .005 (1.05 .15) Dimensions are shown for 338 reference purposes only. 14 X .031 DIA. MIN. (0.8) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 MID-RANGE PC BOARD RELAYS Alphanumeric Index Series Type Page 0409 (Hi-Inrush) ......... 10A, One-pole Relay ......................... 488 0410 .......................... 16A, One-pole Relay ......................... 491 0429 (Hi-Inrush) ......... 10A, One-pole Relay ......................... 457 0430 .......................... 10-16A, One- or Two-pole Relay ...... 495 600 ............................ 3-15A, One-pole Relay ...................... 497 Card E (V23057) ........ 8A, One-pole Relay ........................... 480 IF (V23077) ................ 16A, One-pole Relay ......................... 489 OJ/OJE ...................... 3-10A, One-pole Relay ...................... 422 OMI/OMIH ................ 16A, One-pole Relay ......................... 458 OMI 2 ........................ 5A, Two-pole Relay ........................... 460 OMIF ......................... 20A, One-pole Relay ......................... 466 OMIT ......................... 10A, One-pole Relay ......................... 464 ORWH ....................... 10A, One-pole Relay ......................... 438 OSA ........................... 3-5A, Two-pole Relay ........................ 470 OSZ ........................... 16A, One-pole Relay ......................... 472 OUDH ........................ 10A, One-pole Relay ......................... 432 OZ/OZF ...................... 16A, One-pole Relay ......................... 462 PB .............................. 10A, One-pole Relay ......................... 426 PCD/PCDF ................. 15A, One-pole Relay ......................... 424 PCE ........................... 10A, One-pole Relay ......................... 436 PCG ........................... 5A, Two-pole Relay ........................... 493 PCH ........................... 5-10A, One-pole Relay ...................... 418 PCI ............................. 3A, Two-pole Relay ........................... 468 PCJ ............................ 5A, One-pole Relay ........................... 416 PCK ........................... 16A, One-pole Relay ......................... 478 PCN ........................... 3A, One-pole Relay ........................... 407 PE .............................. 5A, One-pole Relay ........................... 403 RE .............................. 6A, One-pole Relay ........................... 405 RP II/1 ........................ 8-16A, One-pole Relay ...................... 484 RP II/2 ........................ 8A, Two-pole Relay ........................... 482 RP3SL (Hi-Inrush) ...... 16A, One-pole Relay ......................... 486 RT - AC Coil .............. 8-16A, One- or two-pole Relay ......... 448 RT - DC Coil .............. 8-16A, One- or two-pole Relay ......... 446 RT - Sensitive ........... 10A, One-pole Relay ......................... 451 RT - Hi-Inrush ........... 16A, One-pole Relay ......................... 455 RT - Hi-Temp ............ 10-16A, One-pole Relay .................... 453 RY II ........................... 8A, One-pole Relay ........................... 412 SDT ........................... 10A, One-pole Relay ......................... 474 SDT-R ........................ 5-10A, One-pole Relay ...................... 476 SNR (V23092) ............ 6A, One-pole Relay ........................... 409 SRUDH ...................... 12A, One-pole Relay ......................... 442 SRUUH ...................... 15A, One-pole Relay ......................... 444 T7C ............................ 5-12A, One-pole Relay ...................... 440 T7N ............................ 10A, One-pole Relay ......................... 434 T73 ............................ 10A, One-pole Relay ......................... 430 T75 ............................ 8-14A, One-pole Relay ...................... 414 T77 ............................ 3-10A, One-pole Relay ...................... 420 U/UB (V23148 ) ......... 7A, One-pole Relay ........................... 428 V23057 (Card E) ........ 8A, One-pole Relay ........................... 480 V23077 (IF) ................ 16A, One-pole Relay ......................... 489 V23092 (SNR) ............ 6A, One-pole Relay ........................... 409 V23148 (U/UB) .......... 7A, One-pole Relay ........................... 428 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 1 Circuit Breakers ........................ 101-124 NOTE: A question tree that may help you in selecting an appropriate relay for your application can be found on Transformers.............................. 201-212 the next page. 2 Low-signal PC Board Relays . 301-336 3 Mid-Range PC Board Relays.... 401-498 4 Power PC Board Relays ................ 22-35 5 NOTE: In addition to the products listed in this section of the Relays with databook, 3-20A relays described in other sections are Forcibly-Guided Contacts.............. 36-79Following available with printed circuit board terminals. is a list: 6 Plug-in/Panel Relays with Mount Forcibly Guided Contacts SR4 D/M ................................................................... 606 General Purpose Relays............ 701-749 7 SR6 D/M ................................................................... 607 SR6S ........................................................................ 611 V23047 (SR2M) 603 Power Relays & ........................................................ Definite V23050 (SR6) ........................................................... 609 Purpose Contactors...................... 89-131 8 Plug-in/Panel Mount Relays K10 ........................................................................... 720 Latching, Impulse & KH ............................................................................ 709 KU Relays ............................................................................ 723 Rotary ............................... 149-154 PCL/PCLH ................................................................ 713 PT ............................................................................. 717 R10 ........................................................................... 703 Automotive Relays ...................... 141-148 RM ........................................................................... 733 9 10 Power Relays & Contactors KUHP ........................................................................ 803 Solid State Relays & Input/Output Modules ................ 195-207 Latching, Impulse, Rotary & 11 Special Application Relays KUL .......................................................................... 908 TimePCKWK Delay..................................................................... Relays & 904 PE - Latching ............................................................ 902 Counters ........................................ 208-232 RT - Latching ............................................................ 906 12 Solid State Relays & I/O Modules 13 Sensors & Monitors ................... 233-234 1110 OAC/ODC ............................................................... OACM/ODCM ........................................................ 1118 in our line of high performance relays (see HighProducts Performance overview in sectionRelays 14 of this databook) are also and Contactors ....... 233-234 offered with PC(overview) terminals. Specifications and availability subject to change. 14 www.tycoelectronics.com Technical support: 401 Refer to inside back cover. Catalog 1308242 Issued 3-03 MID-RANGE PC BOARD RELAYS Mid Range (3-20A) PC Board Relay Question Tree This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a relay for a particular application. Several relay product families are quite broad (i.e., RT), and only the basic family designator, not the actual product series designator (RT Sensitive) is listed in this guide. Contact Switch Rating? 3 to 10 amps* 10 to 20 amps* AC or DC Coil? AC or DC Coil? AC Coil DC Coil AC Coil DC Coil Number of Poles? Number of Poles? Number of Poles? Number of Poles? One Pole Two + Poles One Pole Two + Poles One Pole Two + Poles None RT 600 OJ/OJE OMIT ORWH OUDH OZ PB PCE PCH PCJ PCN PE RE RP II/1 RY II SDT SDT-R T7C T7N T73 T77 V23057 V23092 V23148 0430 OMI-2 OSA PCG PCI RP II/2 RT RT None One Pole Two + Poles 0409 0430 0410 0429 0430 600 OMI/OMIH OMIF OMIT ORWH OSZ OUDH OZ PB PCD/PCDF PCE PCK RP II/1 RP3 SL RT SDT SRUDH SRUUH T7C T7N T73 T75 V23077 * Typical loads at 28VDC or 120VAC, resistive, for comparison purposes. See catalog pages for a given series for detailed rating specifications. 402 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK PE series 5 Amp Miniature Printed Circuit Board Relay File E214025 File 6656UG Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features * * * * * * * * * Contact Life 1 Form C (SPDT). 5 amp rated current. Sensitive coil 200mW. 10mm height. Flux-tight for wave soldering. Supplied in tubes. DIP configuration. 4kV coil-to-contact insulation. Latching version available. See separate "PE Latching Series" data sheet. Contact Data @ 85C Arrangement: 1 Form C (SPDT). Material: Silver-nickel 90/10. Expected Mechanical Life: 15 million operations minimum. Ratings: 5 amp 250VAC resistive 100,000 operations. Initial Dielectric Strength Between Open Contacts: 1,000VAC. Between Coil and Contacts: 4,000VAC. Creepage/Clearance Coil-Contact: >3.2/4mm. Max. DC Load Breaking Capacity 20 Coil Data DC @ 20C 10 Nominal Coil Power: 200mW. Nominal Voltage VDC Must Operate Voltage VDC Drop-out Voltage VDC Nominal Coil Current (mA) 05 06 12 24 48 125 172 685 2,725 10,970 3.8 4.5 9.0 18.0 36.0 0.5 0.6 1.2 2.4 4.8 40.0 34.9 17.5 8.8 4.4 DC Current (A) 5 DC Resistance in Ohms 10% 2 Resistive Load 1 0.5 0.2 0.1 10 20 30 40 50 100 200 300 DC Voltage (VDC) Operate Data Environmental Data Temperature Range: Operating: -40C to +85C DC coil. Vibration (30 to 500 Hz.): 15g N/O; 5g N/C. Shock (Destructive): >100g. Coil Operating Range 3.0 DC Coil 2.6 Applied Coil Voltage (% of rated nom.) Must Operate Voltage: See Coil Data table. Operate Time : 5 ms typical, at nom. voltage. Release Time : 2 ms typical, at nom. voltage. Bounce Time: 1 ms typical, at nom. voltage (N/O contact); 5 ms typical, at nom. voltage (N/C contact). Switching Rate: 360 ops./hr. max. at rated load. 0A 2.2 5A 1.8 1.4 Nominal Coil Voltage 1.0 Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Flux-tight plastic case. Weight: 0.18 oz. (5 g) approximately. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 0.6 0 +20 +40 +60 +80 +100 Ambient Temperature (C) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 403 Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B PE SCHRACK 0 1 4 024 1. Basic Series: PE = Miniature printed circuit board relay. 2. Enclosure*: 0 = Flux-tight. 3. Contact Arrangement: 1 = 1 Form C (SPDT) 4. Contact Material: 4 = Silver-nickel 90/10 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC * Sealed version available on request. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PE014005 PE014012 PE014024 Wiring Diagram (Bottom View) Outline Dimensions .787 (20.0) .394 (10.0) .394 (10.0) .055 (1.4) .149 (3.8) PC Board Layout (Bottom View) .051 + 0.004 -0 1.3 + 0.1 -0 ( .30 (7.62) ) .047 (1.2) .30 (7.62) .70 (17.78) Dimensions are shown for 404 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RE series 6 Amp Miniature Printed Circuit Board Relay File E214025 NR 10071 NR 8841-014-02 NR 10308.ZA1.A Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data * * * * * * Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. Weight: 0.18 oz. (5 g) approximately. 1 Form A (SPST-NO). 6 amp rated current. Sensitive coil 200 mW. 10.6mm height. Fully sealed with vent hole. Supplied in tubes. Contact Data @ 70C Arrangements: 1 Form A (SPST-NO). Material: Silver-cadmium oxide. Silver-nickel 0.15 with gold plating. Expected Mechanical Life: 30 million operations minimum. Ratings: 6 amp 30 VDC resistive load 500,000 ops. 0.3 amp 50 VDC L/R = 40ms 3,000,000 ops. UL/CSA AgCdO @ 25C 6 amp 250VAC general purpose 30,000 ops. 10 amp 120VAC general purpose (+70C) 6,000 ops. 1/4 HP 240VAC 30,000 ops. 1/6 HP 277VAC 30,000 ops. 1/8 HP 120VAC 30,000 ops. B300 6,000 ops. UL/CSA AgNi 0.15 @ 70C 6 amp 250VAC general purpose 6,000 ops. VDE 0435 @ 70C 6 amp 250VAC general purpose 100,000 ops. 10mA 5VDC 5,000,000 ops. VDE 0660 AC 11 @ 35C 2 amp 400VAC 200,000 ops. Contact Life Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000VAC. Between Coil and Contacts: 4,000VAC. Creepage/Clearance Coil-Contact: 4/4mm. Coil Data DC @ 20C Nominal Coil Power: 200mW. Nominal Voltage VDC 05 06 12 24 48 DC Resistance in Ohms 10% Must Operate Voltage VDC Drop-out Voltage VDC Nominal Coil Current (mA) 12510% 18010% 72010% 2,88015% 11,52015% 3.5 4.2 8.4 16.8 33.3 0.5 0.6 1.2 2.4 4.8 40 33.3 16.7 8.3 4.2 Coil Operating Range Operate Data Must Operate Voltage: See Coil Data table. Operate Time : 5 ms typical, at nom. voltage. Release Time : 1 ms typical, at nom. voltage. Bounce Time: 1 ms typical, at nom. voltage. Switching Rate: 360 ops./hr. max. at rated load. 12,000 Environmental Data Temperature Range: Operating: -40C to +70C. (+85C @ 4 amp). Vibration: 10 to 150 Hz. at 10g N/O 20g N/C. Shock (destructive): >100g. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 405 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RE 0 3 0 006 1. Basic Series: RE = Miniature printed circuit board relay. 2. Enclosure: 0 = Sealed 3. Contact Arrangement: 3 = 1 Form A (SPST-NO) 4. Contact Material: 0 = Silver-cadmium oxide. 2 = Silver-nickel 0.15 with gold plating. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. RE030005 RE030012 RE030024 Outline Dimensions .417 (10.6) .787 (20.0) Wiring Diagram (Bottom View) .394 (10.0) .138 (3.5) VENT HOLE* In case of full load on contacts and under extreme operating conditions (switching rate, ambient temperature) it is recommended to open the sealed (washable) relays, by opening the vent hole* provided for this purpose, after completion of the cleaning process. PC Board Layout (Bottom View) .051 + 0.004 -0 1.3 + 0.1 -0 ( ) .3 (7.62) .4 (10.16) .7 (17.78) Dimensions are shown for 406 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCN series Slim, 3 Amp PC Board Relay File No. E82292 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data * Only 5 mm wide, permitting high density spacing. * 1 Form A contact arrangement. * Sensitive coil requires only 120mW coil power. * Well suited for HVAC controls, I/O panels, PLCs. Voltage: 5 to 24VDC. Nominal Power: 120mW. Operate Power: 58.8mW. Coil Temperature Rise: 35C max., at rated coil voltage. Max. Coil Voltage: 130% of nominal. Duty Cycle: Continuous. Coil Data @ 20C PCN Contact Data @ 20C Arrangements: 1 Form A. Type: Bifurcated. Material: AgNi Max. Switching Rate: 12,000 ops./min. (no load). 100 ops./min. (rated load). Expected Mechanical Life: 20 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 1mA @ 5VDC. Contact Ratings Ratings: 3A @ 250VAC resistive. 3A @ 30VDC resistive. Max. Switched Voltage: AC: 277V; DC: 125V. Rated Switched Voltage: AC: 250V. Max. Switched Current: 3A. Max. Switched Power: AC: 1250VA; DC: 150W. Initial Contact Resistance: 50 milliohms @ 100mA, 6VDC (reference). NOTE: A 5A rated version ot the PCN series is now in development. Consult factory regarding its availability. Insulation Data Insulation to IEC 664/VDE 0110 Voltage Rating: 277VAC. Pollution Degree: 2. Overvoltage Category: II. Tracking Resistance of Relay Base: PTI 600. Nominal Current (mA) 5 6 9 12 24 24.0 20.0 13.3 10.0 5.0 Coil Resistance (ohms) 10% 208 300 675 1,200 4,800 Must Operate Voltage (VDC) Must Release Voltage (VDC) 3.5 4.2 6.3 8.4 16.8 0.5 0.6 0.9 1.2 2.4 Operate Data Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 5 ms typ. Release Time: 2 ms typ. Bounce Time: <1 ms typ. Environmental Data Temperature Range: Operating: -40C to +70C Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 10 to 90% RH. (Non-condensing). Mechanical Data Initial Dielectric Strength Between Open Contacts: 750Vrms. Between Coil and Contacts: 3,000Vrms. Surge Voltage Between Coil and Contacts: 5,080V (1.2 / 50s). Dimensions are shown for reference purposes only. Rated Coil Voltage (VDC) Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Sealed (RT III / wash-tight) plastic case. Weight: 0.1 oz (3g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 407 Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG PCN -1 06 D 3 M H Z ,300 1. Basic Series: PCN = Slim 3A PC Board Relay 2. Number of Poles: 1 = 1 Pole 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24= 24VDC 4. Coil Version: D = Standard 120mW 5. Contact Material: 3 = AgNi 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Enclosure Version: H = Sealed (wash-tight) 8. Insulation: Z = High Insulation 9. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions .787 (20.0) Wiring Diagram .197 (5.0) .492 (12.5) .154 MAX. (3.9) PC Board Layout (Bottom View) .049 - .05 GRID (1.25 - 1.27) .041 (1.05) .0275 DIA. + .004 (.7 + .1) .0394 DIA. + .004 (1 + .1) Reference Data Dimensions are shown for 408 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK V23092 (SNR) series 6 Amp Slim Miniature, PC Board Relay VDE File E48393 File 0631 / 0160 / 0435 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * * * * * * Temperature Range: Operating: -40C to +85C. Operating Humidity: 20 to 85% RH. 1 Form A (SPST-NO) and 1 Form C (SPDT). 6 A rated current. Slim package : 5mm width. Sensitive coil 170mW. 4kV coil-to-contact insulation. Applications: PLCs, timers, temperature controllers, I/O modules. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver tin oxide, silver tin oxide with gold plating; and silver nickel 90/10. Max. Switching Rate: 12,000 ops./min. (no load). 60 ops./min. (rated load). Initial Contact Resistance: AgSnO or AgNi 90/10: 100 milliohms @ 1A, 12VDC. AgSnO, Au plated: 50 milliohms @ 100mA, 6VDC. Max. Switched Voltage: AC: 400V; DC: 300V. Rated Voltage: AC: 250V; DC: 24V. Max. Switched Current: 6A. Max. Switched Power: 1,500VA. (See curve for DC Power). Minimum Load: AgSnO or AgNi 90/10: >500mA, 12VAC/VDC. AgSnO, Au plated: >10mA, 5VAC/VDC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: See curve. Initial Dielectric Strength Between Open Contacts: 1,000VAC, (1 minute). Between Contacts and Coil: 4,000VAC, (1 minute). Surge Voltage Between Coil and Contacts: 6,000V (1.2/50s). Creepage/Clearance Coil-to-Contact: Min. 6/8mm. Consult factory regarding availability of 1 Form A model with 8/8mm. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Plastic sealed case (RT III wash tight). Weight: 0.2 oz. (6g) approximately. Contact Life Max. DC Load Breaking Capacity Initial Insulation Resistance Between Mutually Insulated Conductors: 100,000Mohm @ 500VDC. Coil Data @ 20C Voltage: 5 to 48VDC. Nominal Power: 170mW. V23092 Rated Coil Voltage (VDC) 5 12 24 48 Nominal Current (mA) 34.0 14.2 7.1 4.5 Coil Resistance (ohms) 10% 119 848 3,390 10,600* Must Operate Voltage (VDC) Must Release Voltage (VDC) 3.50 8.40 16.80 33.60 0.25 0.6 1.20 2.40 Coil Operating Range * 15% Operate Data @ 20C Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 5 ms max. at nominal voltage. Release Time: 2.5 ms max. at nominal voltage. Bounce Time: 1.5 ms (N/O) typical at nominal voltage. 5 ms (N/C) typical at nominal voltage. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 409 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23092 A 1 024 A 3 01 1. Basic Series: V23092 = Slim PC board relay. 2. Package Type: A = PCB vertical version. B = PCB flat pack version. 3. Enclosure: 1 = Plastic sealed case. 4. Coil Input: 005 = 5VDC 012 = 12VDC 024 = 24VDC 48 = 48VDC 5. Contact System: A = Standard. 6. Contact Material: 2 = AgSnO, Au plated. 7. Contact Arangement: 01 = 1 Form C (SPDT). 3 = AgSnO 8 = AgNi 90/10 02 = 1 Form A (SPST-NO). Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. V23092A1012A301 V23092A1024A301 Outline Dimensions Vertical Version Flat Pack Version Wiring Diagrams (Bottom Views) PC Board Layout (Bottom View) 1 Form C 1 Form A Dimensions are shown for 410 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK DIN Rail Interface Module and Accessories for V23092 Series (SNR) Relay PC Board Relay Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Outline Dimensions Features * * * * Module width is 0.2 in (5.08mm). Narrow width permits high density packing of modules on a DIN rail. Jumper bars available. Available as a set or as individual components. Technical Information Rated Current / Rated Voltage: 6A / 250VAC. Dielectric Strength, Coil-to-Contact: >4,000Vrms. Insulation Category (VDR 0110b): C / 250. Operating Ambient Temperature: - 20C to +55C. Protection Category: IP 20. Protection Against Accidental Contact Meeting: VBG 4. Wire Cross Section with/without Bootlace Crimp: 0.22 - 2.5mm2. Terminal Torque (Nominal / Maximum): .295 / .442 ft-lb (0.4 / 0.6 Nm). Component Parts ST 1F 000 ST 1F L24 ST 16 016 Socket without LED Socket with LED for 12-24VDC. Mounting frame for relay, without marking ST 17 002 ST 17 005 ST 17 010 Jumper bar, 2 pole Jumper bar, 5 pole Jumper bar, 10 pole ST 16 040 Marking plate, consiting of 100 marking tags Sets - Relay in frame, mounted in socket ST 1P3 024 ST 1P3 L12 ST 1P3 L24 24VDC, AgSnO2 contacts 12VDC, with LED, AgSnO2 contacts 24VDC, with LED, AgSnO2 contacts ST 1P3 L48 ST 1P2 L24 48VDC, with LED, AgSnO2 contacts 24VDC, with LED, Au plated AgSnO2 contacts Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 411 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RY II series 8 Amp Miniature Printed Circuit Board Relay File E214025 NR 10071 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data * * * * * * Termination: Printed circuit terminals. Sockets available. Enclosure (94 V-0 rated): Flux-tight (RT II) or sealed (RTIII) plastic case. Weight: 0.28 oz. (8 g) approximately. 1 Form A (SPST-NO) and1 Form C (SPDT). 8 amp rated current. Sensitive coil 220 mW. 12.3 mm height. 8 mm coil to contact spacing. Flux-tight and washable (sealed) versions. Contact Data @ 70C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT), single contact. Material: Silver-cadmium oxide; Silver-tin oxide; and Silver-nickel 0.15 with or without gold plating. Expected Mechanical Life: 30 million operations minimum. Ratings: Current: 8A Voltage: 250VAC. Power (breaking): 2,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 30A. UL508 @ 70C (RY610 type) 8 amp 28VDC 30,000 ops. 280mA 250VDC 30,000 ops. 1/2 HP 240VAC. 1/4 HP 277VAC. B300 120 or 240VAC VDE 0631 @ 85C (RY531 type) 6 (4) amp, 250VAC 100,000 ops. Contact Life Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 5,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Nominal Coil Power: 220mW. 5 6 12 24 48 DC Resistance in Ohms 10% 113 164 620 2,350 9,600 Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC Nominal Coil Current (mA) 3.5 4.2 8.4 16.8 33.6 0.5 0.6 1.2 2.4 4.8 11.8 14.1 28.2 56.4 112.8 44.0 36.7 19.3 10.2 5.0 Operate Data Must Operate Voltage: See Coil Data table. Operate Time : 7 ms, at nom. voltage. Release Time: 3 ms, at nom. voltage. Bounce Time (N/O contact) : 1 ms, at nom. voltage. Switching Rate: 3,600 ops./hr. max. at rated load. Environmental Data Coil Operating Range Applied coil voltage (U/Un) Nominal Voltage VDC Nominal coil voltage (Un) Temperature Range: Operating: -40C to +85C. Vibration: (10 to 500 Hz.) 5g. Shock (destructive): >100g. Dimensions are shown for 412 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RY 6 1 0 012 1. Basic Series: RY = RY II miniature printed circuit board relay. 2. Version: 2 = Flux-tight, pins on 3.2 mm spacing. Only available with contact arrangement 1. 5 = Flux-tight, pins on 5 mm spacing. Only available with contact arrangement 3. 6 = Sealed, pins on 3.2 mm spacing. Only available with contact arrangement 1. A = Sealed, pins on 5 mm spacing. Only available with contact arrangement 3. 3. Contact Arrangement: 1 = 1 Form C (SPDT) Only available with 3.2 mm pin spacing. 3 = 1 Form A (SPST-NO) Only available with 5 mm pin spacing. 4. Contact Material: 0 = Silver-cadmium oxide. 2 = Silver-nickel 0.15 with gold plating 1 = Silver-nickel 0.15 3 = Silver-tin oxide. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions .398 (10.1) 1.12 (28.5) .484 (12.3) .075 (1.9) .484 (12.3) .128 (3.25) .126 (3.2) 1 Form C, 3.2mm pin spacing .398 (10.1) 1.12 (28.5) .126 (3.2) 1 Form A, 5mm pin spacing PC Board Layouts & Wiring Diagrams (Bottom Views) .051 + .004 DIA. (1.3 + .1) .075 (1.9) .744 (18.9) .098 - .1 GRID (2.5 - 2.54) .126 (3.2) 1 Form C, 3.2mm pin spacing Dimensions are shown for reference purposes only. .051 + .004 DIA. (1.3 + .1) .128 (3.25) .744 (18.9) .098 - .1 GRID (2.5 - 2.54) .198 (5.04) 1 Form A, 5mm pin spacing Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 413 Refer to inside back cover. Catalog 1308242 Issued 3-03 Sensitive, Low Profile, Hi-Current Relay Designed to Meet International Standards P&B T75 series 14 Amp, PC Board Miniature Relay File E29244 File LR45064 File No. 3919 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength * High sensitivity - nominal coil power requirement is as low as 212mW. * Low profile, .591 in. (15mm) tall case uses only .465 in2 (3cm2) of area on the printed circuit board, permitting high density circuit design. * Power switching capability - contacts rated 14 amps in 1 Form A (SPSTNO) or 1 Form C (SPDT) arrangements. * Designed to meet UL, CSA, VDE, SEMKO and SEV requirements. * Designed to meet VDE 8mm spacing, 4kV dielectric, coil to contacts. * Designed to meet 3 mm creepage between contacts. * Conforms to: VDE 0110 - Insulation Group C (250V) VDE 435 Part 201 - High current applications VDE 0804 - Telecommunications equipment VDE 0631 - Temperature controllers and limiters VDE 0700 - Household appliances VDE 0805/5.90 - Office machines * Immersion cleanable, ultrasonically sealed case. * Well suited for a broad range of applications e.g. HVAC, appliances, security and industrial control. Between Open Contacts: 1,000V rms. Between Contacts and Coil: 4,000V rms, 8mm. Coil Data Voltage: 3 to 60VDC. Maximum Power @ 25C: 1W. Nominal Power @ 25C: 230mW, typ. Temperature Rise: 85C per Watt. Duty Cycle: Continuous. Coil Data For more details, refer to application note 13C265, "Mounting, Termination and Cleaning of PC Board Relays." Nominal Voltage Contact Ratings @ 25C with relay properly vented. Remove vent nib after soldering and cleaning. Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Expected Mechanical Life: 20 million operations. Expected Electrical Life: 100,000 operations at 8 amps, 240VAC. 50,000 operations at 14 amps NO / 5 amps NC, 120VAC Res. 30,000 operations at 7.2 FLA, 45 LRA, 120VAC. 10,000 operations at 5 FLA, 30 LRA, 240VAC. 30,000 operations at B300 pilot duty (360VA, 240VAC; 470VA, 120VAC). Contact Ratings (See Figure 1): Maximum Switched Voltage: 380VAC. Maximum Switched Current: 14/5 (N.O./N.C.) amps, AC resistive; 8 amps DC (see Fig. 1) Maximum Switched Power: 200W, DC; 2,000VA, AC. Minimum Required Contact Load: 12V, 100mA. VDE Contact Ratings: 8 amps, 250VAC. UL/CSA Contact Ratings: 10 amps, 240VAC; 8 amps 24VDC; 1/3 HP, 120VAC; 1/2 HP, 240VAC. Figure 1 - DC Switching Load Limit Curve DC Coils 3 5 6 9 12 18 24 36 48 60 DC Resistance in Ohms 10% 40 118 165 365 650 1,455 2,270 5,460 8,790 15,265 Must Operate Voltage 2.1 3.6 4.3 6.4 8.5 12.8 17.2 25.4 34.5 42.8 Nominal Coil Current (mA) 75.0 42.4 36.4 24.7 18.5 12.4 10.6 6.4 5.5 3.9 Operate Data @ 25C Must Operate Voltage: 72% of nom. voltage or less. Must Release Voltage: 10% of nom. voltage or more. Operate Time (Excluding Bounce): 6 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 2.5 ms, typ., at nom. voltage. Maximum Switching Rate: 20 operations/second. Maximum Continuous Operating Voltage: 225% of nom. voltage. 300 ENVIRONMENTAL DATA Switching Voltage (VDC) 200 Temperature Range 100 Storage: -40C to +130C. Operating: -40C to +70C. 50 40 30 25 W 20 50 W 10 0 W 20 Mechanical Data 0W 10 .1 1 10 100 Termination: Printed circuit terminals. Enclosures: Immersion cleanable, plastic sealed case. Weight: 0.65 oz. (18.5g) approximately. Switching Current (Amps DC) Dimensions are shown for 414 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T75 S 5 D 1 1 2 -12 1. Basic Series: T75 = Low profile, printed circuit board relay. 2. Enclosure: S = Immersion cleanable, plastic sealed case. 3. Contact Arrangement: 1 = 1 Form A (SPST-NO) 5 = 1 Form C (SPDT) 4. Coil Input: D = DC voltage 5. Coil Configuration: 1 = Single coil, non-latching (monostable) 6. Mounting and Terminals: 1 = Printed circuit terminals 7. Contact Material: 2 = Silver-cadmium oxide (AgCdO) 8. Coil Voltage: 03 = 3VDC 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 36 = 36VDC 48 = 48VDC 60 = 60VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T75S5D112-05 T75S5D112-12 T75S5D112-24 Outline Dimensions FORM A 1.126 MAX. (28.6) Wiring Diagram (Bottom View) FORM C 1.181 MAX. (30) .591 (15) .150 (3.8) .394 (10) * *ON SINGLE THROW MODELS, ONLY NECESSARY TERMINALS ARE PRESENT. CONTACT TERMINALS: .023 x .040 (.58 x 1.02) REF. COIL TERMINALS: .024 (.61) DIA. REF. PC Board Layouts (Bottom Views) 1 Form C 1 Form A .051 DIA. TYP. (1.3) .051 DIA. TYP. (1.3) .300 (7.6) .126 (3.2) .126 (3.2) Dimensions are shown for reference purposes only. .110 (2.8) .300 (7.6) .197 (5) .748 (19) .110 (2.8) .748 (19) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 415 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCJ series Slim 5 Amp Miniature Power PC Board Relay Air Conditioners, Refrigerators, Microwave Ovens UL File No. E82292 CSA File No. 1031444 VDE File No. 122301 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * Slim outline, L20.4 x W7 x H15 (mm). * 1 Form A (SPST-NO) contact arrangement. * High dielectric capacity of 4kV. * UL, CSA, VDE approvals. * Immersion cleanable, sealed version available. * Cadmium-free contacts. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO). Material: Ag Alloy. Max. Switching Rate: 300 ops./ min. (no load). 20 ops./ min. (rated load). Expected Mechanical Life: 5 million ops (no load). Expected Electrical Life: 100,000 ops (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100Mohms @ 1A, 6VDC. PCJ Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% 5 6 9 12 18 24 40.0 33.3 22.5 16.7 11.1 8.6 125 180 405 720 1,620 2,880 Must Operate Voltage (VDC) Must Release Voltage (VDC) 3.75 4.50 6.75 9.00 13.50 18.00 0.25 0.30 0.45 0.60 0.90 1.20 Operate Data @ 20C Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 10ms max. Release Time: 4ms max. Contact Ratings Ratings: 5A @ 250VAC resistive. Max. Switched Voltage: AC: 275V. DC: 30V. Max. Switched Current: 5A. Max. Switched Power: 1,250VA, 150W. Environmental Data Initial Dielectric Strength Between Open Contacts: 750VAC, 50/60 Hz. (1 min.). Between Contacts and Coil: 4,,000VAC, 50/60 Hz. (1 min.). Surge Voltage Between Coil and Contacts: 7,000V (1.2/50s). Initial Insulation Resistance Temperature Range: Operating: -30C to + 70C. Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Mutually Insulated Conductors: 1,000Mohm @ 500VDCM. Coil Data Voltage: 5 to 24VDC. Duty Cycle: Continuous. Nominal Power: 200mW. Max. Coil Power: 130% of nominal. Dimensions are shown for 416 reference purposes only. Mechanical Data Termination: Printed circuit terminals. Weight: 0.14 oz. (4g) approximately. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG PCJ -1 05 D 3 M H ,000 1. Basic Series: PCJ = Miniature 1 Form A relay 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 4. Coil Input: D = Standard 200mW 5. Contact Material: 3 = AgNi 6. Contact Arrangement: M = 1 Form A (NO) 7. Enclosure: Blank = Vented (Flux-tight) cover 8. Suffix: ,000 = Standard model H = Sealed plastic case Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PCJ-105D3MH,000 PCJ-112D3MH,000 PCJ-124D3MH,000 Wiring Diagram (Bottom View) Outline Dimensions .59 (15.0) .126 (3.2) .02 (.5) .02 (.5) .009 (.24) .012 (.3) .007 (.18) .045 (1.15) .275 (7.0) .453 (11.5) .185 (4.70) PC Board Layout (Bottom View) .275 (7.0) .041 (1.05) .453 (11.5) .803 (20.4) .275 (7.0) .185 (4.70) Reference Data Coil Temperature Rise Operate Time 50 Life Expectancy 4.5 100 4.0 Operation (x10 4 ) 3.5 3.0 Time (msec) Temp. Rise (C) 40 30 20 Operate Time 2.5 2.0 1.5 Release Time 10 1.0 10 0.5 0 0.0 0 0.1 0.2 0.3 0.4 Coil Power (W) Dimensions are shown for reference purposes only. 0.5 0.6 1 0.2 0.4 Dimensions are in inches over (millimeters) unless otherwise specified. 0.6 0.8 1.0 Coil Power (W) 1.2 1.4 2 Specifications and availability subject to change. 4 3 5 Contact Current (A) 6 www.tycoelectronics.com Technical support: 417 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCH series 5 - 10 Amp Miniature 1 Form A or C Power PC Board Relay Air Conditioners, Refrigerators, Microwave Ovens UL File No. E82292 CSA File No. LR48471 VDE File No. 119568 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features * 1 Form A (SPST-NO) or 1 Form C (SPDT) contact arrangements. * 5 or 10A ratings. * Compact size 20L x 10W x 15.2H (mm). * High surge voltage of 8000V. * Cadmium-free contacts. * Sensitive (200mW) coil available on 1 Form A types. * UL, CSA, VDE approval. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: AgSnO. Max. Switching Rate: 300ops./ min. (no load). 20ops./ min. (rated load). Expected Mechanical Life: 5 million ops (no load). Expected Electrical Life: 100,000ops (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Contact Ratings Ratings: Models with 1 Form C Contacts, 400mW Coil 5A (NO) /3A (NC) @ 30VDC resistive. 5A (NO) /3A (NC) @ 277VAC resistive. 10A (NO) @ 125VAC resistive. TV-3 (NO). Models with 1 Form A Contacts, 400mW Coil 5A @ 277VAC/30VDC resistive. 10A @ 125VAC resistive. TV-3. Models with 1 Form A Contacts, 200mW Coil 5A @ 277VAC/30VDC resistive. 10A @ 125VAC resistive. Max. Switched Voltage: AC: 277V. DC: 30V. Max. Switched Current: 10A (NO) / 3A(NC). Max. Switched Power: 1400VA, 150W (NO); 850VA, 90W (NC). Initial Dielectric Strength Between Open Contacts: 750VAC, 50/60 Hz. (1 min.). Between Contacts and Coil: 4,000VAC, 50/60 Hz. (1 min.). Surge Voltage Between Coil and Contacts: 8,000V (1.2/50s). Coil Data @ 20C 200mW Coils (Only available with 1 Form A contact arrangements) Rated Coil Voltage (VDC) 5 6 9 12 24 Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 40.0 30.0 22.5 16.7 8.6 125 180 400 720 2,800 3.75 4.50 6.75 9.00 18.00 0.25 0.30 0.45 0.60 1.20 400mW Coils Rated Coil Voltage (VDC) 5 6 9 12 18 24 48 Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 80.0 66.7 44.4 33.3 22.2 11.1 5.6 62.5 90.0 202.5 360.0 810.0 1,440.0 5,760.0 3.75 4.50 6.75 9.00 13.50 18.00 36.00 0.25 0.30 0.45 0.60 0.90 1.20 2.40 Operate Data @ 20C Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 10ms max. Release Time: 5ms max. Environmental Data Temperature Range: Operating: Models with Class F insulation: -30C to +85C. Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Conductors: 1000Mohm @ 500VDCM. Mechanical Data Termination: Printed circuit terminals. Weight: 0.25 oz (7g) approximately. Coil Data Voltage: 5 to 48VDC. Duty Cycle: Continuous. Nominal Power: 200mW or 400mW. Max. Coil Power: 130% of nominal. Dimensions are shown for 418 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B PCH OEG -1 12 D 2 H ,001 1. Basic Series: PCH = Miniature 1 Form C relay 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 4. Coil Input: D = Standard 400mW 24 = 24VDC 48 = 48VDC L = Sensitive 200mW (Only available with 1 Form A contacts) 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: Blank = 1 Form C (Only available with Standard 400mW coil) 7. Enclosure: Blank = Vented (Flux-tight) cover M = 1 Form A H = Sealed plastic case 8. Insulation class: Blank = Class 155(F) system 9. Option: ,001 = Standard model Other Suffix = Special options Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PCH-105D2H,001 PCH-112D2H,001 PCH-124D2H,001 Outline Dimensions Wiring Diagram (Bottom View) .78 (19.8) .39 (9.90) .598 (15.2) NOTE: Only necessary terminals are present on 1 Form A models. .157 (4.0) .018 (.45) .031 (.8) PC Board Layout (Bottom View) .031 .031 (.8) (.8) .200 (5.08) .400 (10.16) .009 (.24) .008 (.2) 2 - .047 (1.20) .200 (5.08) .400 (10.16) 3 - .059 (1.50) .300 (7.6) .300 (7.6) .100 (2.54) .100 (2.54) .043 (1.10) NOTE: Only necessary terminals are present on 1 Form A models. Reference Data (Typical Values) (Only applicable for 1 Form C, 400mW coil model with 277VAC load on NO) Coil Temperature Rise Operate Time 70 Life Expectancy 100 6.0 60 5.0 30 20 3.0 2.0 10 1.0 0 0.0 0.1 Operation (x 104) Operate Time 4.0 40 Time (msec) Temp. Rise (C) 50 10 Release Time 0.2 0.3 0.4 0.5 0.6 0.7 0.32 0.4 0.48 0.56 0.6 0.72 1 0 Coil Power (W) Dimensions are shown for reference purposes only. Coil Power (W) Dimensions are in inches over (millimeters) unless otherwise specified. 1 2 3 4 5 6 8 7 9 10 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 419 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T77 series 10 Amp Miniature PC Board Relay File E29244 File LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * Small size for high density PC board mounting. * 1 Form A contact arrangements. * Creepage spacings of 6.5mm between contact and coil. * Ideal for appliance, office equipment. * 4,000VAC dielectric strength between contact and coil. * UL Class F (155C) approved insulation system. Voltage: 3 to 24VDC. Nominal Coil Power: Contact rating 3 = 200mW. Contact rating 10 = 450mW. Coil Temperature Rise: Contact rating 3 = 35C max. Contact rating 10 = 40C max. Max. Coil Power: 120% of nominal. Duty Cycle: Continuous. Coil Data @ 20C Contact Data @ 20C Arrangements: 1 Form A (SPST-NO). Material: Contact rating 3 - Silver. Contact rating 10 - Silver alloy. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations. Minimum Contact Load: 10mA @ 5VDC. Initial Contact Resistance: 100 milliohms max. @ 100mA, 6VDC. Rated Coil Voltage (VDC) 3 5 12 24 Coil Resistance (Ohms) 10% Contact Rating 3 Contact Rating 10 45 20 125 55 720 320 2,800 1,280 Must Operate Voltage (VDC) Must Release Voltage (VDC) 2.25 3.75 9.00 18.00 0.15 0.25 0.60 1.20 Contact Ratings @ 20C with relay properly vented. Remove vent nib after soldering and cleaning. Contact Rating 3 10 UL/CSA Ratings Type Operations Operate Data @ 20C 3A @ 277VAC Resistive 10LRA/1.5FLA @ 120VAC Motor 5.4LRA/0.9FLA @ 240VAC Motor 3LRA/1.5FLA @ 120VAC Motor 3A @ 250VAC Resistive 3A @ 250VAC UL General Purpose 3A @ 30VDC Resistive 2A @ 120VAC Gen. Purpose 3A @ 120VAC Resistive 10LRA/1.5FLA @ 120VAC Motor 5.4LRA/0.9FLA @ 240VAC Motor 10A @ 250VAC Resistive 10A @ 30VDC Resistive 10A @ 250VAC UL General Purpose 6,000 30,000** 30,000** 100,000* 100,000 100,000 100,000 100,000*** 100,000*** 30,000** 30,000** 100,000 100,000 200,000 *Denotes test at 70C ambient temperature. **Denotes test at 85C ambient temperature. ***Denotes test at 105C ambient temperature. Operate Time: 10 ms, max. (excluding bounce). Release Time: 4 ms, max. (excluding bounce). Environmental Data Temperature Range: Storage: -40C to +130C. Operating: -30C to +55C. Contact Rating 3: -40C to +80C. Contact Rating 10: -40C to +55C. Vibration: Mechanical: 10 to 55 Hz., 1.5mm double amplitude. Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock: Mechanical: 100g min. Operational: 10g min. Operating Humidity: 45 to 85% RH. Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Initial Insulation Resistance Between Mutually Insulated Elements: 108 ohms, min. @ 500VDC. Dimensions are shown for 420 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: Printed circuit board. Enclosures (94V-0 Flammability Ratings): T77S: Immersion cleanable. T77V: Vented, flux-tight, plastic cover. Weight: 0.36 oz. (9g). Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Operate Time 12 50 10 40 8 30 20 Life Expectancy 100 Contact Rating 10, 120VAC Res. Operation (x 104) 60 Time (msec) Temp. Rise (Deg.) Figure 1 - Coil Temperature Rise 6 Operate Time 4 10 Contact Rating 3, 250VAC Res. 2 10 Release Time 0.1 0.2 0.3 0.4 0.5 0.6 0.1 0.7 Coil Power (W) 0.2 0.3 0.4 0.5 0.6 1 0.7 0 1 2 3 4 5 6 7 8 9 10 Contact Current (A) Coil Power (W) Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Ordering Information Typical Part Number B T77 V 1 D 10 -24 1. Basic Series: T77 = Miniature PCB relay. 2. Enclosure: V = Vented (Flux-tight)* S = Immersion cleanable case 3. Contact Arrangement: 1 = (SPST-NO) 4. Coil Input: D = DC Voltage 5. Contact Rating: 3 = 3A 10 = 10A 6. Coil Voltage: 03 = 3VDC 05 = 5VDC 12 = 12VDC 24 = 24VDC *Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T77V1D3-12 T77V1D3-24 T77V1D10-12 T77V1D10-24 T77S1D3-12 T77S1D3-24 Outline Dimensions T77S1D10-12 T77S1D10-24 Wiring Diagram (Bottom View) 1 Form A .40 (10.20) .716 (18.20) .57 (14.70) 2 PLACES .017 X .017 (.45 X .45) 2 PLACES .04 X .011 (1.0 X .30) .16 (4.0) Suggested PC Board Layout (Bottom View) 4 - .051(1.3)O .30 (7.6) .50 (12.7) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. .100 (2.54) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 421 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OJ/OJE series 3-10 Amp Miniature, PC Board Relay Appliances, HVAC, Industrial Control. UL File No. E82292 CSA File No. LR48471 VDE File No. 10080 TUV File No. R75081 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * * * * * * Miniature size 18.2 x 10.2 x 14.7h. 1 Form A (SPST-NO) contact arrangement. Designed to meet UL, CSA, VDE, TUV requirements. Designed to meet 4kV dielectric between coil and contacts (OJ). Sensitive and standard coils available. Immersion cleanable, sealed version available. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO). Material: Ag, Ag Alloy. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @5VDC. Initial Contact Resistance: 100 milliohms @ 1A,6VDC. Contact Ratings 3A @ 250VAC resistive, 3A @ 28VDC resistive. OJ/OJE-LMH: 8A @ 250VAC resistive, 8A @ 28VDC resistive. OJ/OJE-DM: 5A @ 250VAC resistive, 5A @ 28VDC resistive. OJ/OJE-HM: 10A @ 250VAC resistive, 10A @ 28VDC resistive. Max. Switched Voltage: AC: 265V. DC: 30V. Max. Switched Power: OJ/OJE-LM: 720VA, 90W OJ/OJE-LMH: 1,800VA, 200W OJ/OJE-DM: 1,200VA, 150W OJ/OJE-HM: 2,500VA, 280W Ratings: OJ/OJE-LM: Note: Consult factory regarding TV-5 rated models. Initial Dielectric Strength Between Open Contacts: OJ: 750VAC 50/60 Hz. (1 minute). OJE: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: OJ: 4,000VAC 50/60 Hz. (1 minute). OJE: 3,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: OJ: 10,000V (1.2/50s). OJE: 5,000V (1.2/50s). OJ/OJE-L Sensitive Rated Coil Voltage (VDC) Nominal Current (mA) 5 6 9 12 24 40.0 33.3 22.5 16.7 8.6 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 125 180 400 720 2,800 3.75 4.50 6.75 9.00 18.00 0.25 0.30 0.45 0.60 1.20 OJ/OJE-D and -H Standard Rated Coil Voltage (VDC) Nominal Current (mA) 5 6 9 12 24 48 91.0 75.0 50.0 37.5 18.8 9.4 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 55 80 180 320 1,280 5,100 3.50 4.20 6.30 8.40 16.80 33.60 0.25 0.30 0.45 0.60 1.20 2.40 Operate Data Must Operate Voltage: OJ/OJE -L: 75% of nominal voltage or less. OJ/OJE -D and -H: 70% of nominal voltage or less. Must Release Voltage: OJ/OJE -L: 5% of nominal voltage or more. OJ/OJE -D and -H: 5% of nominal voltage or more. Operate Time: OJ/OJE -L: 15 ms max. OJ/OJE -D and -H: 10 ms max. Release Time: 4 ms max. Environmental Data Temperature Range: Operating: OJ/OJE-L: -30C to +80C OJ/OJE-D and -H: -30C to +60C. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Coil Data Voltage: 5 to 48VDC. Nominal Power: OJ/OJE-LM and LMH: 200 mW. OJ/OJE-DMand HM: 450 mW. Coil Temperature Rise: OJ/OJE-LM and LMH : 30C max., at rated coil voltage. OJ/OJE-DM and HM: 40C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 422 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OJ/OJE-SS: Vented (Flux-tight), plastic cover. OJ/OJE-SH: Sealed, plastic case. Weight: 0.32 oz (9g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information B Typical Part Number OJE -SH -1 12 L M H ,095 1. Basic Series: OJ = 4kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input/Contact Rating: L = Sensitive (200mW) Coil, 3A Contacts** H = Standard (450mW) Coil, 10A Contacts D = Standard (450mW) Coil, 5A Contacts 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. High Capacity Contact Rating Option for Sensitive Coil: H = 8A Contacts (Only available with Coil Input/Contact Rating code "L"). 8. Suffix: ,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model * Not suitable for immersion cleaning processes. ** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information. Our authorized distributors are more likely to stock the following items for immediate delivery. OJE-SH-105DM,095 OJE-SH-112DM,095 OJE-SH-124DM,095 OJ-SH-105HM,095 OJ-SH-112LMH,095 OJ-SH-124LMH,095 OJE-SH-124LMH,095 OJE-SH-112HM,095 OJE-SH-105LMH,095 OJE-SH-112LMH,095 Wiring Diagram (Bottom View) Outline Dimensions .58 .02 (14.7 .5) .157 .012 (4.00 .3) .012 (.3) .018 x .018 (.45 x .45) .039 (1.0) .039 (1.0) .012 (.3) .300 .008 (7.62 .2) PC Board Layout (Bottom View) 4 - .05 DIA (1.3) .067 (1.71) .401 .02 (10.2 .5) .300 .004 (7.6 .1) .067 (1.71) .500 .008 (12.70 .2) .500 .004 (12.7 .1) .1 .008 (2.54 .2) .716 .02 (18.2 .5) .100 .004 (2.54 .1) Reference Data Coil Temperature Rise Operate Time 60 12 50 10 40 8 Life Expectancy 100 30 20 Operation (x 104) Time (msec) Temp. Rise (C) HM type, 120VAC Res. 6 Operate Time 4 LMH type, 250VAC Res. 10 LM type, 250VAC Res. 2 10 DM type, 250VAC Res. Release Time 0.1 0.2 0.3 0.4 0.5 Coil Power (W) Dimensions are shown for reference purposes only. 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 1 0.7 0 2 3 4 5 6 7 8 9 10 Contact Current (A) Coil Power (W) Test relay: OJE-SH-112LMH Dimensions are in inches over (millimeters) unless otherwise specified. 1 Specifications and availability subject to change. www.tycoelectronics.com Technical support: 423 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCD/PCDF series 15 Amp Low Profile Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E82292 CSA File No. LR48471 TUV File No. R9751117 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Low profile (10mm), 15 Amp switching capacity. * 1 Form A contact arrangement. * Sensitive 200mW coil (250mW on 48VDC coil). * Immersion cleanable, sealed version available. * Quick connect terminals available (PCDF). Contact Data @ 20C Arrangements: 1 Form A (SPST-NO). Material: AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. PCD &PCDF Rated Coil Voltage (VDC) Nominal Current (mA) 5 6 9 12 24 48 40.0 33.3 22.5 17.0 8.6 5.2 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 125 180 400 720 2,880 9,200 3.75 4.50 6.75 9.00 18.00 36.00 0.50 0.60 0.90 1.20 2.40 4.80 Operate Data Contact Ratings Ratings: 15A @ 125VAC resistive (PCDF only, load must be carried through QC terminals to achieve this rating), 10A @ 250VAC resistive, 10A @ 24VDC resistive. Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time:15 ms max. Release Time: 8 ms max. 5A @ 125VAC inductive (coso= 0.4, L/R=7msec), 5A @ 24VDC inductive (coso= 0.4, L/R=7msec). Environmental Data Max. Switched Voltage: AC: 250V. DC: 24V. Max. Switched Current: 15A. Max. Switched Power: 1,800VA, 240W. Temperature Range: Operating: -30C to +70C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,500VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 5,000V (1.2 / 50s). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Mechanical Data Coil Data Voltage: 5 to 48VDC. Nominal Power: 200 mW except 48VDC coil (250mW). Coil Temperature Rise: 20C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 424 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: PCD: Printed circuit terminals. PCDF: Printed circuit terminals and quick connect terminals. Enclosure (94V-0 Flammability Ratings): Sealed plastic case. Weight: PCD: 0.31 oz (9g) approximately. PCDF: 0.35 oz (10g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information B Typical Part Number OEG PCD -1 24 D 1 M H ,000 1. Basic Series: PCD = PC Board Terminals. PCDF = Quick Connect Terminals. 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 4. Coil Input: D = Standard 5. Contact Material: 1 = AgSnO 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Enclosure: Blank = Vented (Flux-tight)* plastic cover 8. Suffix: ,000 = PCD standard model H = Sealed plastic case ,S000 = PCDF standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions .187 (4.75) PCDF PCD .248 (6.3) .051 DIA (1.3) .634 .008 (16.1 .2) .126 .25 (3.2) (6.35) .402 .02 (10.2 .5) .018 (.45) .071 (1.8) .197 .008 (5.0 .2) .047 (1.2) .138 .012 (3.5 .3) .047 (1.2) .024 .004 (.6 .1) .059 (1.5) .905 .02 (23.0 .5) .012 (.3) .500 .008 (12.7 .2) .402 .008 (10.2 .2) .533 .012 (13.55 .3) .075 (1.9) .634 .02 (16.1 .5) .905 .008 (23.0 .2) .02 (.5) .56 .008 (14.25 .2) .700 .008 (17.78 .2) .02 (.5) .40 .008 (10.16 .2) .118 .008 (3.0 .2) .700 .008 (17.78 .2) .138 .012 (3.5 .3) .018 .047 (.45) (1.2) .807 .012 (20.5 .3) .98 .008 (25.0 .2) .197 .008 (5.0 .2) .153 (3.89) .012 (.3) PC Board Layouts (Bottom View) Wiring Diagrams PCD PCD PCDF .400 (10.16) .236 (.6) .079 (2.0) PCDF .063 DIA (1.6) .059 (1.5) .153 (3.89) .56 (14.25) .500 (12.7) (Top View) (Bottom View) 2 -- .039 DI A (1.0) .700 (17.78) .118 (3.0) (Bottom View) 2 -- .039 DIA (1.0) .197 (5.0) .118 (3.0) .700 (17.78) .039 (1.0) .075 (1.9) .061 (1.55) Reference Data Coil Temperature Rise Operate Time 15A 140 100 Maximum Allowable Coil Voltage Operating Votage Range 15A 10A 80 Cool Coil 60 100 10 125VAC Resistive Operation (x 104) 10A 160 120 Life Expectancy 12 Time (msec) % of Supplying Voltage to Coil 180 8 Operate Time 6 4 Hot Coil Applied 40 Pick-Up Voltage 10 24VDC Resistive 2 Release Time 20 0 -40 -20 0 20 40 60 80 100 120 140 0.4 0.6 0.8 1.0 1.2 1.4 Coil Power (W) Ambient Temp. (C) Note: This data is based on the max. allowable temperature for E type insulation coil (115C). Dimensions are shown for reference purposes only. 0.2 Dimensions are in inches over (millimeters) unless otherwise specified. 1 0 2 4 6 8 10 12 14 16 18 20 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 425 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK PB series 10 Amp, PC Board Miniature Relay File E214025 File 4570-4940-0042 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * Small size for high density PC board mounting. * 1 Form A and 1 Form C contact arrangements. * Creepage/clearance to VDE 0435 and VDE 0700. * 2,500Vrms dielectric strength between contact and coil. * UL Class F approved insulation system. * Low-complexity design for enhanced reliability. * High-temperature version available. Temperature Range (Operating): PB1 or PB3: -40C to +85C. PBH: -20C to +105C. Vibration: 30 to 400 Hz., 4g's, min. Shock: Mechanical (Destruction): 30g min. Protection Category: IP 54 Mechanical Data Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver nickel 90/10. Max. Switching Rate: 6,000 ops./min. (minimum load). 600 ops./min. (rated load). Expected Mechanical Life: 5 million operations. Expected Electrical Life : PB1 &PB3 @85C: 100,000 operations @ 6A, 240VAC (NO). 25,000 operations @ 10A, 240VAC (NO). 25,000 operations @ 10A/3A, 240VAC (NO/NC). 1,000 operations @ 10A/10A, 240VAC (NO/NC). PBH @105C: 250,000 operations @ 2A, 240VAC (NO). 150,000 operations @ 5A, 240VAC (NO). 100,000 operations @ 6A/6A, 240VAC (NO/NC). Maximum Contact Rating: PB1 &PB3: NO (Make) 10A / NC (Break) 3A. PBH: 6A (mtg. space 3mm); 4A (dense pack). Maximum Switching Voltage: PB1 &PB3: 250VAC, 100 VDC. PBH: 250VAC Maximum Make Current (All): 15A (max. 4 sec at 10% duty cycle.) Maximum Breaking Capacity: PB1 &PB3: 750VA (NC contact) / 2,500VA (NO contact). PBH: 1,500VA. Initial Dielectric Strength Termination: Printed circuit board. Enclosure: Splash-resistant (unsealed) plastic case (UL Flammability Class V-0). Weight: 0.2 oz. (5.4g). Contact Life (PB1 & PB3) Max. DC Load Breaking Capacity (PB1 & PB3) Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 2,500Vrms. Surge Voltage Resistance Between Coil and Contacts: 4,000Vrms. Clearance / Creeepage Distance: 3 mm / 4 mm. Initial Insulation Resistance Between Mutually Insulated Elements: 108 ohms. Tracking Resistance of Relay Base: PB1: CTI 250 PB3: CTI 300 Insulation to VDE 0110b (2/79): Category C / Reference Voltage 250. Coil Data @ 20C Voltage: 5, 6, 9, 12, 24 and 36VDC. Nominal Coil Power: 360mW. Operate Coil Power: 200mW. Coil Data @ 20C Rated Coil Voltage (VDC) 5 6 9 12 24 36 Coil Operating Range (PB1 & PB3) Coil Resistance 10% (ohms) 70 100 225 400 1,600 3,600 Must Operate Voltage (VDC) 3.75 4.5 6.75 9.0 18.0 27.0 Must Release Voltage (VDC) Coil Current (mA) 0.5 0.6 0.9 1.2 2.4 3.6 72.0 60.0 40.0 30.0 15.0 60.0 Operate Data @ 20C Operate/Release Time: 20 ms, max. (excluding bounce). Bounce Time: 15 ms, max. Operate Coil Power: 200mW. Dimensions are shown for 426 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B PB 1 3 4 012 1. Basic Series: PB = Miniature, 10A PC board relay. 2. Version: 1 = Standard version, CTI 250 3. Contact Arrangement: 1 = 1 Form C (SPDT) 3 = High CTI version, CTI 300 H = High Temerature (105C) version, CTI 250 3 = 1 Form A (SPST-NO) 4. Contact Material: 4 = AgNi 90/10 4. Coil Input: 005 = 5VDC 006 = 6VDC 009 = 9VDC 012 = 12 VDC 024 = 24VDC 036 = 36VDC (Other voltages available as special order) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PB114012 PB114024 Outline Dimensions .59 (15.0) .59 (15.0) .787 (20.0) .59 (15.0) Wiring Diagram (Bottom View) Suggested PC Board Layout (Bottom View) .05 + .004 DIA. (1.3 + .1) 11 A1 12 A2 14 .246 (6.25) Dimensions are shown for reference purposes only. .197 (5.0) .197 (5.0) .295 (7.5) Dimensions are in inches over (millimeters) unless otherwise specified. .197 (5.0) .049 (1.25) Specifications and availability subject to change. .098 (2.5) www.tycoelectronics.com Technical support: 427 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK V23148 (U/UB) series 7 Amp, Latching or Non-latching, Miniature Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * 1 Form A (SPST-NO), 1 Form B (SPST-NC) and1 Form C (SPDT). * 8 amp rated current. * Standard (non-latching) or latching types. * Sensitive model requires 180mW to pull-in. * 2,000Vrms and 4,000Vrms contact-to-coil dielectric versions. * Washable (sealed) plastic case. Must Operate Voltage: See Coil Data table. Operate Time: 6 ms, standard model; 7 ms, sensitive model; 5 ms, latching model. Release (Reset) Time: 3 ms. Bounce Time (N/O contact / N/C contact) : 2 ms / 10ms. Switching Rate: 180,000 ops./hr. max. at rated load. Contact Data @ 70C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT), single contact. Material: Silver-nickel 0.15. Expected Mechanical Life: 20 million operations. Ratings: Current: 7A, standard and latching types; 5A, sensitive type. Voltage: 250VAC. Power (breaking): 1,750 VA standard and latching; 1,250 VA, sensitive. Voltage (breaking): 250VAC. Current (making, max. 4s at 10% duty cycle): 12A. Standard Type 7 amp resistive, 24VDC or 250VAC, 50,000 ops 5 amp resistive, 250VAC, 150,000 ops. Latching Type 7 amp resistive, 24VDC or 250VAC, 50,000 ops. 5 amp resistive, 250VAC, 100,000 ops. Sensitive Type 5 amp resistive, 250VAC, 100,000 ops. 5 amp resistive, 24VDC, 30,000 ops. Initial Dielectric Strength Environmental Data Temperature Range: Operating: -25C to +70C. Vibration: (10 to 55 Hz.) 10g. Shock (functional): 10g at 11ms, half-sine. Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. Weight: 0.34 oz. (9.5 g) approximately. Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 2,000Vrms for standard dielectric version. 4,000Vrms for high dielectric version. Creepage/Clearance: 2.5/2.5mm for standard dielectric version. 3.5/3.5mm for high dielectric version. Surge Resistance Between Coil and Contacts: 5,000Vrms. Coil Data DC @ 20C Nominal Coil Power: 330 - 800mW, dependent upon model. Nominal Voltage VDC DC Resistance in Ohms 10% Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC Nominal Coil Current (mA) 0.6 1.2 2.4 4.8 10.5 21.1 42.2 72.4 75.0 37.5 18.8 5.0 4.4 8.8 17.5 35.0 0.6 1.2 2.4 4.8 12.6 25.3 50.6 76.3 54.6 27.3 13.5 12.0 Must Operate Voltage VDC Reset Voltage VDC Maximum Voltage VDC Nominal Coil Current (mA) 4.7 9.4 18.7 37.4 1.5 3.0 6.0 12.0 6.2 12.4 24.7 49.4 181.8 100.8 50.5 27.4 Standard, non-latching models 80 320 1,280 3,800 4.2 8.4 16.8 33.6 Sensitive, non-latching models 6 12 24 48 Nominal Voltage VDC 110 440 1,780 4,000 DC Resistance in Ohms 10% Latching models 6 12 24 48 33 119 475 1,750 Dimensions are shown for 428 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Coil Operating Range Applied coil voltage (U/Un) 6 12 24 48 Nominal coil voltage (Un) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23148 -A 0 0 03 -C 101 1. Basic Series: V23148 = U/UB miniature printed circuit board relay. 2. Version A = Non-latching. B = Latching. 3. Dielectric Strength, Coil-to-Contacts: 0 = 2,000Vrms. 1 = 4,000Vrms. 4. Coil Sensitivity: 0 = Standard. 1 = Sensitive (Not available on latching version). 5. Coil Voltage: 03 = 6VDC 05 = 12VDC 07 = 24VDC 08 = 48VDC 6. Contact Arrangement: A = 1 Form C (SPDT) B = 1 Form A (SPST-NO) C = 1 Form B (SPST-NC) 7. Contact Material: 101 = Silver-nickel 0.15 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions .835 MAX. (21.2) Wiring Diagrams (Bottom Views) .638 MAX. (16.2) 1 Form C .587 MAX. .035 (14.9) (.9) .063 (1.6) .126 + .008 (3.2 + .2) 1 Form A PC Board Layout (Bottom View) .059 + .004 DIA. (1.5 + .1) .1 GRID (2.54) 1 Form B .067 (1.7) .063 (1.6) .047 + .004 DIA. (1.2 + .1) .039 + .004 DIA. (1.0 + .1) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 429 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T73 series Low Profile, 10 Amp Printed Circuit Board Relay File E29244 File LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * 10 amp switching capacity. * UL Class F (155C) coil insulation system standard. * 1 Form A and 1 Form C contact arrangements. * Ideal for domestic appliances, HVAC and security. * Resists high temperature and various chemical solutions. * Immersion cleanable, plastic sealed case available. Voltage: 3 to 48VDC. Nominal Power: 450 milliwatts. 660 milliwatts for 48VDC coil. Coil Temperature Rise: 35C max, at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Coil Data @ 20C Contact Data @ 20C Rated Coil Voltage (VDC) Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Max. Switching Rate: 240 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations. Minimum Load: 10mA @ 5VDC Initial Contact Resistance: 100 milliohms max. @ 100mA, 6VDC. Typical Ratings Type Operations 1/3HP NO @ 240VAC 10A NO @ 120VAC 6A NO @ 120VAC 6A NO @ 24VDC 10A/5A @ 120VAC 1/4HP NO @ 120VAC Motor Resistive Resistive Resistive Resistive Motor 30,000 100,000 100,000 100,000 100,000 20 56 80 180 320 720 1,150 3,500 1.95 3.25 3.90 5.85 7.80 11.7 15.6 31.2 Must Release Voltage (VDC) 0.15 0.25 0.30 0.45 0.60 0.90 1.20 2.40 Operate Data @ 20C Operate Time: 10 ms (excluding bounce). Release Time: 5 ms (excluding bounce). Environmental Data Temperature Range: Storage: -40C to +130C. Operating: -30C to +80C. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 100g min. Operational: 10g min. Operating Humidity: 45 to 85% RH. Consult factory for other ratings. Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Mechanical Data Initial Insulation Resistance Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Weight: 0.42 oz. (12g). Between Mutually Insulated Elements: 108 ohms min. @ 500VDC. Ag contact rating. Figure 1 - Coil Temperature Rise Operate Time 12 50 10 40 8 30 20 Life Expectancy 100 28VDC Resistive Operation (x 104) 60 Time (msec) Temp. Rise (Deg.) Must Operate Voltage (VDC) 3 5 6 9 12 18 24 48 Contact Ratings @ 20C with relay properly vented. Remove vent nib after soldering and cleaning. Contact Arrang. 1& 5 Coil Resistance (Ohms) +10% Operate Time 6 4 120VAC Resistive 10 2 10 Release Time 1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.2 Coil Power (W) 0.3 0.4 0.5 0.6 0.7 0.8 0 Coil Power (W) 2 4 8 6 10 12 Contact Current (A) Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Dimensions are shown for 430 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T73 S 5 D 1 5 -24 1. Basic Series: T73 = Miniature, printed circuit board relay. 2. Enclosure: V = Vented (Flux-tight)* S = Immersion cleanable, plastic sealed case. 3. Contact Arrangement: 1 = 1 Form A (SPST-NO). 5 = 1 Form C (SPDT) 4. Coil Input: D = DC voltage. 5. Relay Type: 1 = Standard coil. 6. Contact Material: 5 = Silver-Cadmium Oxide 7. Coil Voltage: 03 = 3VDC 06 = 6VDC 05 = 5VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 18 = 18VDC 48 = 48VDC * Not suitable for immersion cleaning process. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T73S5D15-05 T73S5D15-12 T73S5D15-24 Outline Dimensions .877 (22.3) .693 (17.6) .610 (15.5) .067 (1.7) .122 (3.1) 0.30 (7.62 Wiring Diagrams (Bottom Views) Suggested PC Board Layouts (Bottom Views) 1 Form A 1 Form A .200 (5.08) .700 (17.8) 2 x .051 DIA. (1.3) 2 3 4 .300 (7.62) 5 2 x .039 DIA. (1.0) 1 Form C 1 Form C .200 (5.08) 1 2 .700 (17.8) 3 x .051 DIA. (1.3) .500 (12.7) .300 (7.62) 3 4 5 2 x .039 DIA. (1.0) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 431 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OUDH series 10 Amp Miniature, Sealed PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Low profile miniature power relay * High density available on PC board due to small size. * 450mW coil available. * Meets 2kV dielectric between coil and contacts. * Meets 5kV surge voltage. * Immersion cleanable, sealed version available. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO), 1 Form C (SPDT). Material: Ag Alloy. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. OUDH Rated Coil Voltage (VDC) Nominal Current (mA) 5 6 9 12 24 48 89.6 75.0 50.0 37.5 20.9 13.7 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 56 80 180 320 1,280 3,500 3.75 4.50 6.75 9.00 18.00 36.00 0.50 0.60 0.90 1.20 2.40 4.80 Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 10 ms max. Release Time: 5 ms max. Contact Ratings Ratings: 10A @ 120VAC resistive, 10A @ 28VDC resistive, 1/4 HP @ 120VAC. 3A @ 120VAC inductive (coso= 0.4), 3A @ 28VDC inductive (L/R= 7msec). Environmental Data Max. Switched Voltage: AC: 240V. DC: 110V. Max. Switched Current: 10A. Max. Switched Power: 1,200VA, 300W. Temperature Range: Operating: -30C to +60C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 5,000V (1.2/50s). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Mechanical Data Coil Data Voltage: 5 to 48VDC. Nominal Power: 450mW except 48VDC coil (660mW) Coil Temperature Rise: 60C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 432 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OUDH-SS: Vented (Flux-tight), plastic cover. OUDH-SH: Sealed, plastic case. Weight: 0.35 oz (10g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OUDH -SH -1 12 D M ,000 1. Basic Series: OUDH = Miniature, sealed PC board relay. 2. Enclosure: SS = Vented (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 24 = 24VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .602 .012 (15.3 .3) .138 .012 (3.5 .3) .1 (2.54) .018 (.45) .012 (.3) .067 (1.70) .500 (12.70) .1 (2.54) .020 (.5) .2 (5.08) PC Board Layout (Bottom View) .085 .008 (2.15 .2) .858 .012 (21.8 .3) .300 .012 (7.62 .3) .085 .008 (2.15 .2) .300 .012 (7.62 .3) .673 .012 (17.10 .3) .200 .012 (5.08 .3) .200 .012 (5.08 .3) .500 (12.70) .2 (5.08) Reference Data Operate Time 12 50 10 40 8 30 20 Life Expectancy 100 28VDC Resistive Operation (x 104) 60 Time (msec) Temp. Rise (C) Coil Temperature Rise Operate Time 6 4 120VAC Resistive 10 2 10 Release Time 1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.2 Coil Power (W) Dimensions are shown for reference purposes only. 0.3 0.4 0.5 0.6 0.7 0.8 0 Coil Power (W) Dimensions are in inches over (millimeters) unless otherwise specified. 2 4 8 6 10 12 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 433 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T7N series 10 Amp Miniature PC Board Relay File E22575 File LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Insulation Resistance * Low cost, reduced height, 10A relay. * 1 Form A and 1 Form C contact arrangement. * Plastic materials employ UL 94V-0 flammability. * UL class F (155C) coil standard. * Immersion cleanable, sealed package. * Applications include appliance, HVAC, security system, garage opener light, emergency lighting. * European "white goods" version available by special order. Between Mutually Insulated Elements: 108 ohms, min. @ 500VDC. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Max. Switching Rate: Mechanical: 300 operations/min. Electrical: 30 operations/min. Expected Mechanical Life: 10 million operations min. (no load). Expected Electrical Life: 100,000 operations min. (at rated coil voltage). Minimum Contact Load: 10mA @ 5VDC. Initial Contact Resistance: 100 milliohms, max. @ 1A, 6VDC. UL Contact Ratings @ 20C with relay properly vented. Remove vent nib after soldering and cleaning. Contact Arrang. UL/CSA Ratings Type 1&5 1/4HP @ 240VAC 1/3HP @ 120VAC 1/3HP NO @ 120VAC 1/3HP NO @ 240VAC 5A/5A @ 240VAC 10A NO @ 240VAC 10A/5A @ 240VAC 8A NC @ 240VAC 1/6HP NC @ 240VAC 1/4HP NO @ 240VAC 1/10HP NO @ 120VAC 10A/5A @ 240VAC TV-3 NO @ 120VAC 6A NC @ 240VAC 10A/5A @ 240VAC 10A/5A @ 28VDC 10A NO @ 240VAC 10A NO @ 240VAC 34.8LRA/6FLA NO @ 120VAC 10A/5A @ 120VAC 5A/5A @ 240VAC 10A/5A @ 28VDC Motor Motor Motor Motor Resistive Resistive Gen. Purpose Resistive Motor Motor Motor Resistive Tungsten Resistive Resistive Resistive Resistive Gen. Purpose Motor Resistive Resistive Resistive Operations 1,000* 6,000 6,000 6,000** 6,000* 6,000 6,000 6,000 6,000** 6,000** 6,000** 6,000** 25,000 25,000** 30,000 30,000 30,000** 30,000** 100,000 100,000 100,000 100,000 Coil Data Voltage: 3 through 48VDC. Nom. Power: 360mW. Coil Temp. Rise: See Figure 1. Max. Coil Power: 150% of nominal. Duty Cycle: Continuous. Coil Data @ 20C Rated Coil Voltage (VDC) Coil Resistance 10% (Ohms) Must Operate Voltage (VDC) Must Release Voltage (VDC) 3 5 6 9 12 18 24 36 48 25 70 100 225 400 900 1,600 3,600 6,400 2.1 3.5 4.2 6.3 8.4 12.6 16.8 25.2 33.6 .15 .25 .30 .45 .60 .90 1.20 1.80 2.40 Operate Data @ 20C Operate Time: 10 ms, max. (excluding bounce). Release Time: 5 ms, max. (excluding bounce). Environmental Data Temperature Range: Storage: -40C to +130C. Operating: -40C to +85C. (no water condensation and no water drop). Vibration: 10-55 Hz., .063" (1.6mm) double amplitude; 10-55 Hz., .079" (2.0mm) double amplitude. Shock: Mechanical: 100g minimum. Operational: 10g minimum. Operating Humidity: 45 to 85% RH. *Denotes test at 70C ambient temperature. **Denotes test at 85C ambient temperature. Mechanical Data Initial Dielectric Strength Between Open Contacts: 750VAC, 50/60 Hz. (1 min.) Between Coil and Contacts: 2,000VAC, 50/60 Hz. (1 min.) Dimensions are shown for 434 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (UL 94V-O Flammability Ratings): T7NS: Immersion cleanable case with knock-off nib for ventilation. T7NV: Vented, flux-tight plastic cover. Weight: 0.38 oz. (11g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 100 P&B Operate Time Life Expectancy 100 12 10A 90 28VDC Resistive 10 80 Operate Time 70 0A 60 50 40 30 20 Operation (x 104) 5A Time (msec) Coil Temp. Rise Above Ambient (C) Figure 1 - Coil Temperature Rise 8 6 4 10 240VAC Resistive 2 Release Time 10 1 0 0 0.2 0.4 0.6 0.8 1.0 0.1 1.2 0.2 0.3 0.4 0.5 0.6 0 0.7 2 4 6 8 10 12 Contact Current (A) Coil Power (W) Applied Continuous Coil Volt. (% Of Rated Volt.) Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Ordering Information Typical Part Number B T7N S 5 D 1 -24 1. Basic Series: T7N = Miniature, printed circuit board relay. 2. Enclosure: V = Vented, flux-tight* 3. Contact Arrangement: 1 = 1 Form A(SPST-NO) S = Immersion cleanable case with knock-off nib. 5 = 1 Form C (SPDT) 4. Coil Input: D = DC Coil. 5. Contact Material: 1 = Silver-cadmium oxide contacts. 6. Coil Voltage: 03 = 3VDC 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 36 = 36VDC 48 = 48VDC * Not suitable for immersion cleaning. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T7NS1D1-12 T7NS1D1-24 T7NS5D1-05 T7NS5D1-12 T7NS5D1-24 T7NS5D1-48 Outline Dimensions Suggested PC Board Layout (Bottom View) Tolerance (unless otherwise noted): 3 decimal: .010 ( .254); 2 decimal: .015 ( .381). .052 DIA. TYP. (1.3) 4 PLACES .023 x .043 MAX. (.58 x 1.04) .015 MAX. (.40) .63 MAX. (16.0) .480 (12.2) .079 (2.0) .472 (12.0) .87 MAX. (22.0) .081 (2.06) .236 (6.0) .140 +.040, -.030 (3.5 +1.0, - 0.8) .040 DIA. (1.02) Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. .65 MAX. (16.4) Wiring Diagram (Bottom View) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 435 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCE series 10 Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E82292 CSA File No. LR48471 VDE File No. 6175 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data * Small, low profile package, 10 Amp switching capacity. * 1 Form A and 1 Form C contact arrangements. * UL Class F (155C) insulation system standard * Immersion cleanable, sealed version available. * Applications include appliance, HVAC, security system, garage opener control, emergency lighting. Voltage: 6 to 48VDC. Nominal Power: 360 mW Coil Temperature Rise: 35C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Coil Data @ 20C PCE Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy, AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 6 9 12 24 48 60 40 30 15 7 100 225 400 1,600 6,400 4.50 6.75 9.00 18.00 36.00 0.30 0.45 0.60 1.20 2.40 Contact Ratings Ratings: 10A @ 250VAC resistive, 10A @ 120VAC resistive, 10A @ 28VDC resistive. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 10 ms max. Release Time: 5 ms max. 3A @ 250VAC inductive (coso= 0.4), 3A @ 120VAC inductive (coso= 0.4), 3A @ 28VDC inductive (L/R=7msec). Environmental Data Temperature Range: Operating: -30C to +70C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Max. Switched Voltage: AC: 250V. DC: 28V. Max. Switched Current: 10A. Max. Switched Power: 2,500VA, 280W. Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 4,000V (1.2 / 50s). Mechanical Data Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): PCE: Sealed plastic case with knock-off nib for ventilation Weight: 0.32 oz (11g) approximately. Reference Data Coil Temperature Rise Operate Time 100 80 Cool Coil 60 28VDC Resistive 10 Hot Coil 10A Applied Pick-Up Voltage Operate Time 4 Maximum Allowable Coil Voltage 120 40 100 Operation (x 10 ) Operating Votage Range Time (msec) 160 140 Life Expectancy 12 Time (msec) % of Supplying Voltage to Coil 180 8 6 4 10 240VAC Resistive 2 20 Release Time 1 0 -30 -10 10 30 50 70 90 110 130 150 0.1 Ambient Temp. (C) 0.2 0.3 0.4 0.5 0.6 0.7 0 2 4 6 8 10 12 Contact Current (A) Coil Power (W) Note: This data is based on the max. allowable temperature for E type insulation coil (115C). Dimensions are shown for 436 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG PCE -1 24 D 1 M ,000 1. Basic Series: PCE = Miniature Power PC board relay. 2. Termination: 1 = 1 pole 3. Coil Voltage: 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 4. Coil Input: D = Standard 5. Contact Material: 1 = AgCdO 2 = AgSnO 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Enclosure: Blank = Flux-tight plastic case. H = Sealed plastic case with knock-off nib for ventilation 8. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PCE-112D1MH,000 PCE-124D1MH,000 PCE-112D1H,000 PCE-124D1H,000 Wiring Diagram (Bottom View) Outline Dimensions .646 .02 (16.4 .5) .016 (.4) .138 .012 (3.5 .3) .012 (.3) .039 (1.0) .016 (.4) .039 (1.0) .039 (1.0) .016 (.4) .866 .02 (22.0 .5) PC Board Layout (Bottom View) .47 .008 (12.0 .2) .079 .008 (2.0 .2) .48 .008 (12.2 .2) .63 .02 (16.0 .5) .216 .008 (5.5 .2) .472 .004 (12.0 .1) .079 .008 (2.0 .2) .48 .004 (12.2 .1) 5 - .05 DIA (1.3) Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 437 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG ORWH series 10 Amp Miniature Power PC Board Relay File No. E82292 .. TUV Rheinland Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Compact relay with 1 Form A and 1 Form C contact arrangements. * 10 Amp switching capacity. * Flux-tight or sealed version available. * Applications include appliance, HVAC, security system, garage opener control, emergency lighting. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: AgCdO. Max. Switching Rate: 300 ops./min. (no load). 20 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations at 10A @ 250VAC res. (NO). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. ORWH Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 3 5 6 9 12 24 48 120.0 71.4 60.0 44.4 40.0 15.0 7.5 25 70 100 225 400 1,600 6,400 2.1 3.5 4.2 6.3 8.4 16.8 33.6 0.3 0.5 0.6 0.9 1.2 2.4 4.8 Operate Data Contact Ratings Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 10 ms max. Release Time: 5 ms max. Ratings: 10A/6A @ 250VAC resistive (NO/NC), 10A/6A @ 28VDC resistive (NO/NC), 15A @ 120VAC resistive (NO), 15A @ 28VDC resistive (NO), 10A @ 277VAC resistive (NO). Max. Switched Voltage: AC: 277V. DC: 30V. Max. Switched Current: 15A. Max. Switched Power: 2,770VA, 360W. Environmental Data Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 1,500VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 3,000V (1.2 / 50s). Temperature Range: Operating: -30C to +70C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): ORWH-SS: Vented (flux-tight) cover. ORWH-SH: Sealed plastic case. Note: Vent nib should be removed after soldering and cleaning. Weight: 0.33 oz (9.5g) approximately. Coil Data @ 20C Voltage: 3 to 48VDC. Nominal Power: 360 mW Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 438 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B ORWH OEG -SS -1 12 D M ,N000 1. Basic Series: ORWH = Miniature Power PC board relay. 2. Enclosure: SS = Vented (flux-tight)* plastic case. SH = Sealed plastic case 3. Number of Poles: 1 = 1 pole 4. Coil Voltage: 03 = 3VDC 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Option: ,N000= Standard model. Other Suffix = Custom model. * Not suitable for immersion cleaning Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. ORWH-SH-112DM,N000 ORWH-SH-124DM,N000 ORWH-SH-105D,N000 ORWH-SH-106D,N000 ORWH-SH-109D,N000 ORWH-SH-112D,N000 ORWH-SH-124D,N000 ORWH-SH-148D,N000 ORWH-SS-148D,N000 ORWH-SS-106D,N000 ORWH-SS-109D,N000 ORWH-SS-112D,N000 ORWH-SS-124D,N000 ORWH-SS-112DM,N000 ORWH-SS-124DM,N000 ORWH-SS-148DM,N000 ORWH-SS-105D,N000 Wiring Diagram (Bottom View) Outline Dimensions .61 .012 (15.5 .3) .748 .012 (19.0 .3) .622 .02 (15.8 .5) .157 .008 (4.0 .2) TERMINAL DIMENSIONS: COIL: 0.024 (0.6) DIA. LOAD: 0.12 x 0.35 (0.3 x 0.9) PC Board Layout (Bottom View) .236 .004 (6.0 .1) .236 .004 (6.0 .1) Note: Only necessary terminals are present on 1 Form A models. .079 .004 (2.0 .1) .48 .004 (12.2 .1) 5 - .05 DIA (1.3) Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 439 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T7C series 5 - 12 Amp Miniature Power PC Board Relay File E22575 File LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength * * * * * Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 1,500VAC 50/60 Hz. (1 minute). Up to 12 amp switching capacity. UL Class F (155C) coil insulation system. 1 Form A and 1 Form C contact arrangements. Ideal for domestic appliances, HVAC and security. Resists high temperature and various chemical solutions. Initial Insulation Resistance Between Mutually Insulated Elements: 108 ohms min. @ 500VDC. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide or silver. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations. Minimum Load: 10mA @ 5VDC Initial Contact Resistance: Ag: 100 milliohms max. @ 100mA, 6VDC. AgCdO: 100 milliohms max. @ 1A, 6VDC. Coil Data @ 20C Voltage: 3 to 48VDC. Nominal Power: 360 milliwatts. 510 milliwatts for 48VDC coil. Coil Temperature Rise: 35C max, at rated coil voltage. Max. Coil Voltage: 130% of nominal. Duty Cycle: Continuous. Coil Data @ 20C Silver Cadmium Oxide Contact Ratings @ 20C with relay properly vented. Remove vent nib after soldering and cleaning. Contact Arrang. 1& 5 UL/CSA Ratings Type Operations 1/3HP NO @ 120VAC Motor TV-2 NO @ 120VAC Tungsten 5.4LRA/0.9FLA NO @ 240VAC Motor 10LRA/1.5FLA @ 120VAC Motor 12A NO @ 120VAC Resistive/GP 34.8LRA/6FLA NO @ 120VAC Motor 10A/5A @ 240VAC Resistive/GP 10A/5A @ 28VDC Resistive 240VA, 240VAC Pilot Duty 4LRA/4FLA NO @ 120VAC Motor 4LRA/2FLA NC @ 120VAC Motor 6LRA/6FLA NO @ 120VAC Motor 7A @ 277VAC Resistive/GP 10LRA/2.5FLA NO @ 277VAC Motor 6,000** 25,000** 30,000*** 30,000*** 100,000* 100,000** 100,000** 100,000** 100,000** 100,000**** 100,000**** 100,000*** 100,000 100,000 Consult factory for other ratings. *Denotes test at 60C ambient temperature. **Denotes test at 70C ambient temperature. ***Denotes test at 85C ambient temperature. ****Denotes test at 105C ambient temperature. Silver Contact Ratings @ 20C with relay properly vented. Remove vent nib after soldering and cleaning. Contact Arrang. 1& 5 Type Operations 5A @ 120VAC 5A @ 28VDC Resistive Resistive 6,000 6,000 25 70 100 225 400 1,600 4,500 2.25 3.50 4.50 6.75 9.00 18.00 36.00 3 5 6 9 12 24 48 Maximum Allowable Coil Voltage 120 100 80 Environmental Data Temperature Range: Storage: -40C to +130C. Operating: -40C to +85C. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 100g min. Operational: 10g min. Operating Humidity: 45 to 85% RH. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): T7CS: Immersion cleanable with knock-off nib. T7CV: Vented, flux-tight, plastic cover with knock-off nib. Weight: 0.42 oz. (12g). Life Expectancy 100 10 Cool Coil 60 24VDC Resistive 8 Operate Time 6 4 Hot Coil 10A Applied Pick-Up Voltage 0.15 0.25 0.30 0.45 0.60 1.20 2.40 Operate Time: 10 ms (excluding bounce). Release Time: 5 ms (excluding bounce). Operation (x 104) Operating Voltage Range Time (msec) 160 Must Release Voltage (VDC) Operate Data @ 20C Operate Time Time (msec) % of Supplying Voltage to Coil Must Operate Voltage (VDC) 12 180 40 Coil Resistance (Ohms) +10% Mechanical Data Ratings Figure 1 - Coil Temperature Rise 140 Rated Coil Voltage (VDC) 10 240VAC Resistive 2 Release Time 20 1 0 -30 -10 10 30 50 70 90 110 130 150 Ambient Temp. (C) 0.2 0.4 0.6 0.8 1.0 Coil Power (W) 1.2 1.4 0 2 6 8 4 Contact Current (A) 10 12 Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Graphical data applicable to model with silver cadmium oxide contacts. Dimensions are shown for 440 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T7C V 5 D -24 1. Basic Series: T7C = Miniature power relay. 2. Enclosure: V = Vented (Flux-tight)* S = Immersion cleanable case with knock-off nib. 3. Contact Arrangement: 1 = 1 Form A (SPST-NO) 5 = 1 Form C (SPDT) 4. Coil Input: D = DC Voltage 5. Contact Material: Leave Blank = Silver Cadmium Oxide (12A Max. Rating) 6. Coil Voltage: 03 = 3VDC 12 = 12VDC 05 = 5VDC 18 = 18VDC 2 = Silver (5A Max. Rating) 06 = 6VDC 24 = 24VDC 09 = 9VDC 48 = 48VDC * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T7CV5D-05 T7CV5D-06 T7CV5D-12 T7CV5D-24 T7CS5D-05 T7CS5D-06 T7CS5D-12 T7CS5D-24 Outline Dimensions .795 .02 (20.2 .5) .65 (16.50) .795 .02 (20.2 .5) Movable Contact Terminal: .012 x.039 (0.3 x 1.0) Stationary Contact Terminals: .012 x .039 (0.3 x 1.0) Coil Terminals: .022 x .022 (.56 x .56) .197 MAX. (5.0) Wiring Diagrams (Bottom Views) Suggested PC Board Layouts (Bottom Views) 1 Form A 1 Form A 2-.043O (2-1.1) 2-.051O (1.3) .236 .008 (6 .2) .079 .008 (2 .2) .48 .008 (12.2 .2) .236 .008 (6 .2) 1 Form C 1 Form C 2-.043O (2-1.1) 3-.051O (1.3) .236 .008 (6 .2) .079 .008 (2 .2) .48 .008 (12.2 .2) .236 .008 (6 .2) Socket Hold-Down Spring 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. 20C430 spring is designed to secure T7C relay in 27E1064 socket. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 441 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG SRUDH series 12 Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E82292 CSA File No. LR48471 TUV File No. R60271 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data * Small package, 12 Amp switching capcity. * 1 Form A and 1 Form C contact arrangements. * Immersion cleanable, sealed version available. * Applications include appliance, HVAC, security system, garage opener control, emergency lighting. Voltage: 6 to 48VDC. Nominal Power: 360 mW except 48VDC coil (510mW) Coil Temperature Rise: 35C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Coil Data @ 20C Contact Data @ 20C SRUDH Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 6 9 12 24 48 60 40 30 15 10 100 225 400 1,600 4,500 4.50 6.75 9.00 18.00 36.00 0.60 0.90 1.20 2.40 4.80 Contact Ratings Ratings: 12A @ 120VAC resistive, 10A @ 240VAC resistive, 10A @ 28VDC resistive. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 15 ms max. Release Time: 5 ms max. 4A @ 120VAC inductive (coso= 0.4), 4A @ 28VDC inductive (L/R=7msec) Environmental Data Max. Switched Voltage: AC: 240V. DC: 28V. Max. Switched Current: 12A. Max. Switched Power: 2,400VA, 300W. Temperature Range: Operating: -30C to +60C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 1,500VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 3,000V (1.2 / 50s). Mechanical Data Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): SRUDH-SS: Vented (Flux-tight) plastic cover SRUDH-SH: Sealed plastic case Weight: 0.42 oz (12g) approximately. Reference Data Coil Temperature Rise Operate Time 100 120 100 80 10 Cool Coil 60 24VDC Resistive 4 Operation (x 10 ) Maximum Allowable Coil Voltage Time (msec) Operating Votage Range Time (msec) % of Supplying Voltage to Coil 160 140 Life Expectancy 12 180 8 Operate Time 6 4 Hot Coil 10A Applied 40 Pick-Up Voltage 10 240VAC Resistive 2 Release Time 20 1 0 -30 -10 10 30 50 70 90 110 130 150 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 2 4 6 8 10 12 Contact Current (A) Coil Power (W) Ambient Temp. (C) Note: Rise data is based on the max. allowable temp. for E type insulation coil (115C). Dimensions are shown for 442 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG SRUDH -SS -1 12 D M 1 ,000 1. Basic Series: SRUDH = Miniature Power PC board relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: 1 = AgCdO 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SRUDH-SH-112D1,000 SRUDH-SH-124D1,000 SRUDH-SH-112DM1,000 SRUDH-SH-124DM1,000 Wiring Diagram (Bottom View) Outline Dimensions .795 .02 (20.2 .5) .177 .008 (4.5 .2) .012 (.3) .079 .008 (2.0 .2) .018 (.45) .236 .008 (6.0 .2) .020 (.5) .020 (.5) .039 (1.0) PC Board Layout (Bottom View) .236 .004 (6.0 .1) .65 .02 (16.5 .5) .236 .008 (6.0 .2) .079 .008 (2.0 .2) .039 (1.0) .48 .008 (12.2 .2) .236 .004 (6.0 .1) .157 .008 (4.0 .2) .079 .008 (2.0 .2) .48 .004 (12.2 .1) 5 - .05 DIA (1.3) .795 .02 (20.2 .5) Socket Hold-Down Spring 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. 20C430 spring is designed to secure SRUDH relay in 27E1064 socket. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 443 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG SRUUH series 15 Amp Miniature Power PC Board Relay UL File No. E82292 TUV File No. R60271 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * 15 Amp switching capacity. * 1 Form A and 1 Form C contact arrangements. * Immersion cleanable, sealed version available. * Applications include appliance, HVAC, security system, garage opener control, emergency lighting. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver cadmium oxide. Max. Switching Rate: 300 ops./min. (no load). 20 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load, relay vented). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. SRUUH Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 3 6 9 12 24 48 120 60 40 30 15 10 25 100 225 400 1,600 4,500 2.25 4.50 6.75 9.00 18.00 36.00 0.30 0.60 0.90 1.20 2.40 4.80 Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 15 ms max. Release Time: 5 ms max. Contact Ratings Ratings: 15A @ 120VAC resistive, 10A @ 240VAC resistive, 10A @ 28VDC resistive. Max. Switched Voltage: AC: 240V. DC: 28V. Max. Switched Current: 15A. Max. Switched Power: 2,400VA, 300W. Note: Sealed relays should be vented after soldering and cleaning in order to achieve listed ratings. Initial Dielectric Strength Environmental Data Temperature Range: Operating: -30C to +60C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 1,500VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 3,000V (1.2 / 50s). Initial Insulation Resistance Between Mutually Insulated Elements: 100M ohms min. @ 500VDC. Mechanical Data Coil Data Voltage: 3 to 48VDC. Nominal Power: 360 mW except 48VDC coil (510mW). Coil Temperature Rise: 60C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 444 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): SRUUH-SS: Vented (Flux-tight) plastic cover SRUUH-SH: Sealed plastic case Weight: 0.42 oz (12g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG SRUUH -SS -1 12 D 1 M ,000 1. Basic Series: SRUUH = Miniature Power PC board relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 03 = 3VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Material: 1 = Silver Cadmium Oxide 6. Contact Arrangement: Leave Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Option: ,000= Standard model. Other Suffix = Custom model. * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SRUUH-SH112D1M,000 SRUUH-SH124D1M,000 SRUUH-SH112D1,000 SRUUH-SH124D1,000 Wiring Diagram (Bottom View) Outline Dimensions .795 .02 (20.2 .5) .177 .008 (4.5 .2) .012 (.3) .079 .008 (2.0 .2) .022 (.56) .020 (.5) .020 (.5) PC Board Layout (Bottom View) .039 (1.0) .236 .004 (6.0 .1) .236 .004 (6.0 .1) .236 .008 (6.0 .2) .65 .02 (16.5 .5) .236 .008 (6.0 .2) .079 .008 (2.0 .2) .039 (1.0) .48 .008 (12.2 .2) .079 .008 (2.0 .2) .48 .004 (12.2 .1) 5 - .05 DIA (1.3) .157 .008 (4.0 .2) Note: Only necessary terminals are present on 1 Form A (SPST-NO) models. .795 .02 (20.2 .5) Socket Hold-Down Spring 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. 20C430 spring is designed to secure SRUUH relay in 27E1064 socket. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 445 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B RT series (DC Coil) 16 Amp PC Board Miniature Relay File E22575 File LR15734 NR 6106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25C * SPST through DPDT contact arrangements. * Immersion cleanable and flux tight versions available. * VDE 10mm spacing, 5kV dielectric, coil to contacts. * UL Class F (155C) coil insulation system. * Conforms to UL 508, 1873, 353 and 1950. * Low profile; 15.7mm height. * Sensitive coil; 400mW. * Withstand surge voltage of 10,000V. * Potter & Brumfield or Schrack brand. Voltage: 5 to 110VDC. Nominal Power @ 25C: 400mW. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 25C, 500VDC and 50% rel. humidity. Coil Construction: UL Class F (155C). Coil Data @ 25C Contact Data Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 2,3. 2 Form A (DPST-NO) Wiring Diagram Code 5. 1 Form C (SPDT) Wiring Diagram Code 1, 2, 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 10 million operations. Initial Contact Resistance: 100 milliohms max @ 1A 12VDC. Nominal Voltage VDC DC Resistance in Ohms 10% Must Operate Voltage VDC Nominal Coil Current (mA) - 50/60Hz. 005 006 009 012 018 024 048 060 110 62 90 202 360 810 1,440 5,760 9,000 30,250 3.5 4.2 6.3 8.4 12.6 16.8 33.6 42.0 77.0 80 66.7 44.4 33.3 22.2 16.7 8.3 8.0 4.3 Designed to meet UL/CSA/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. 3 5 Max. Ambient Temp. vs. Coil Voltage Type Resistive/GP Resistive Resistive/GP Resistive Motor Motor Motor Motor Tungsten Pilot Duty Operations 100K 100K 30K 30K 6K 6K 6K 30K 25K 30K 16A/16A @ 250VAC 20A/20A @ 277VAC 20A/20A @ 24VDC 16A/16A @ 30VDC 1 HP @ 480VAC* 1 HP @ 240VAC* 1/2 HP @ 120VAC* 60 LRA/10 FLA @ 250VAC* TV-5 @ 120VAC* A300, 720VA @ 240VAC* B300, 360VA @ 240VAC** Resistive/GP Resistive/GP Resistive Resistive Motor Motor Motor Motor Tungsten Pilot Duty Pilot Duty 50K 30K 30K 30K 6K 6K 6K 30K 25K 30K 30K 8A/8A @ 277VAC 8A/8A @ 30VDC 10A/10A @ 250VAC 10A/10A @ 30VDC 1/2 HP @ 240VAC* 1/4 HP @ 120VAC* 34.8 LRA/6 FLA @ 120VAC* 17.4 LRA/5 FLA @ 240VAC* B300, 360VA @ 240VAC* TV-3 @120VAC* Resistive/GP Resistive Resistive/GP Resistive Motor Motor Motor Motor Pilot Duty Tungsten 100K 100K 30K 30K 6K 6K 30K 30K 30K 25K * Form A only ** Form B only Applied Coil Voltage (% of rated nom.) UL/CSA/VDE Ratings @ 25C Code NO/NC Load 1 10A/10A @ 277VAC 10A/10A @ 30VDC 12A/12A @ 250VAC 12A/12A @ 30VDC 3/4 HP @ 480VAC* 1/2 HP @ 240VAC* 1/3 HP @ 120VAC* 48 LRA/10 FLA @ 240VAC* TV-3 @ 120VAC* A300, 720VA @ 240VAC* 300 260 220 180 0A 8A 12A 16A 140 100 60 B 0 A 40 60 20 80 Max. Allowable Ambient Temp. (C) 100 A: Coil temperature = Ambient temperature. B: 110% of nominal coil voltage at rated contact load. Operate Data @ 25C Must Operate Voltage(DC): 70% of nominal. Must Release Voltage(DC): 10% of nominal. Operate Time (Excluding Bounce): 7 ms, typ., 15ms max. at nom. voltage. Release Time (Excluding Bounce): 3 ms, typ., 6ms max. at nom. voltage. Environmental Data Temperature Range: Storage: -40C to +105C. Operating: -40C to +85C at rated current. Vibration, Operational N.O.:0.065"(1.65mm) max. excursions from 10 - 55 Hz: N.C.:0.032"(0.82mm) max. excursions from 10 - 55 Hz: with no contact opening >10s. Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Surge Voltage (DC): >10,000VAC x (1.2 x 50 sec). Termination: Printed circuit terminals. Enclosures: RT 1, 2, 3, 4: Flux-tight, top vented, plastic case. RT B, C, D, E: Immersion cleanable, plastic case. Weight: 0.35 oz. (10g) approximately. Dimensions are shown for 446 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information (DC Coil Models) Typical Part Number B RT B 3 4 012 F 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). 2 = 1 pole 12A, Pinning 5mm, flux-tight (Code 2). C = 1 pole 12A, Pinning 5mm, sealed (Code 2). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram codes 1, 2 or 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1, 2 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10 (standard stock). 5. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 048 = 48VDC 110 = 110VDC 006 = 6VDC 012 = 12VDC 024 = 24VDC 060 = 60VDC 5. Coil Insulation Classification, Brand and Case Color F = UL Class F, Potter & Brumfield Brand, Black Case Leave Blank = UL Class F, Schrack Brand, Orange Case Our authorized distributors are more likely to stock the following items for immediate delivery. RT114012F RTB14012F RT114024F RTB14024F RTB14005F RTB34012F RTD14005F RTD14012F RTD14024F RTB34024F RT314012F RT314024F RTD34012F RT424012F RT424024F RTE24005F RTE24012F RTE24024F RTE44012F RTE44024F Breaking Capacity Outline Dimensions 1 Pole .50 (12.7) 6X .031 X .020 (.80 X .52) 50 Contact Current A 1.14 (29) 2X .020 X .020 (.52 X .52) 10 B 5 2 1 0.5 .17 (4.3) 0.1 10 PC Board Layouts (Bottom View) 1 Pole 12A 3.5mm .051 DIA. (1.30) .051 DIA. (1.30) 20 50 100 DC Voltage 10 5 2 1 A B 0.5 0.1 10 200 300 20 50 100 DC Voltage 200 300 A: 1 Contact. B: 2 Contacts in series. A: 16A Version. B: 12A Version. 1 Pole 16A 2 Pole 8A 5mm 1 Pole 12A 5mm 2 Pole 50 Contact Current .62 (15.7) .051 DIA. (1.30) Contact Life for Resistive AC Load (Typical) .400 (10.16) .400 (10.16) .800 (20.32) .800 (20.32) 051 DIA. (1.30) .051 DIA. (1.30) .300 (7.62) Code 1 107 .051 DIA. (1.30) .300 (7.62) Code 2 .800 (20.32) .300 (7.62) Code 3 & 5 Notes: 1. On single throw models, only necessary terminals are present. 2. With the recommended PCB hole sizes, a grid with a pattern from 0.0984 to 0.1 in (2.5 - 2.54 mm) can be used. Operations .276 (7.0) A: 8A Model B: 12A Model C: 16A Model 106 B 5 10 A C 104 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 Breaking Capacity (kVA) Wiring Diagrams (Bottom View) 1 Pole 12A 1 Pole 16A 2 Pole 8A Codes 1 & 2 Code 3 Code 5 Note: Data from 250VAC @ 70C. Note: On single throw models, only necessary terminals are present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 447 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RT series (AC Coil) 16 Amp Miniature Printed Circuit Board Relay File E214025 NR 6106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * * * * * * Voltage: 24, 115, 230VAC (consult factory for availability of other voltages). Nominal Power @ 25C: .75VA. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 20C, 500VDC and 50% rel. humidity. Coil Construction: UL Class F (155C). SPST through DPDT contact arrangements. Immersion cleanable and flux tight versions available. Meets VDE 10mm spacing, 5kV dielectric, coil to contacts. Conforms to UL 508, 1873 and 353. UL Class F (155C) coil construction Schrack brand Contact Data Coil Data Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 2, 3. 2 Form A (DPST-NO) Wiring Diagram Code 5. 1 Form C (SPDT) Wiring Diagram Code 1, 2, 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 10 million operations. DC Must Nominal Resistance Operate Voltage in Ohms Voltage VAC 10% VAC UL/CSA Ratings @ 25C: Code NO/NC Load Type Operations 12A NO @ 240VAC 10A/5A @ 240VAC 8A @ 28VDC 1 HP @ 240VAC* 1/2 HP @ 120VAC* 8A @ 28VDC* B300 GP Resistive/GP Resistive Motor Motor Resistive Pilot Duty 30K 100K 30K 6K 6K 30K 6K 16A/8A @ 240VAC 8A @ 28VDC 1/2 HP @ 120VAC* 1HP @ 240VAC* 48 LRA, 8 FLA @ 240VAC B300 GP Resistive Motor Motor Motor Pilot Duty 6K 30K 6K 6K 30K 6K 8A @ 240VAC 8A @ 28VDC 1/2 HP @ 240VAC 1/4 HP @ 120VAC B300 Resistive Resistive/GP Motor Motor Pilot Duty 30K 30K 6K 6K 6K 1 3 5 350 8,100 32,500 18.0 86.3 172.5 3.6 17.3 34.5 31.6 6.6 3.3 24.3 5.1 2.3 Max. Ambient Temp. vs. Coil Voltage Applied Coil Voltage (% of rated nom.) Designed to meet UL/CSA/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. 24 115 230 Nominal Nominal Drop-out Coil Coil Voltage Current Current VAC (mA)-50Hz. (mA)-60Hz. 300 260 220 180 0A 8A 12A 16A 140 100 60 B 0 A 20 40 60 80 Max. Allowable Ambient Temp. (C) 100 A: Coil temperature = Ambient temperature. B: 110% of nominal coil voltage at rated contact load. Operate Data Must Operate Voltage: See coil data. Operate Time (Excluding Bounce): 8 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 11 ms, typ., at nom. voltage. * Form A only VDE Ratings @ 25C: Code NO/NC Load Type Operations 1 12A @ 250VAC 12A @ 250VAC Resistive Resistive 30K 100K 3 16A @ 250VAC 16A @ 250VAC Resistive Resistive 10K 50K 5 8A @ 250VAC 8A @ 250VAC Resistive Resistive 30K 50K Environmental Data Temperature Range: Storage: -40C to +105C. Operating: -40C to +70C at rated current. Vibration: 30 - 150 Hz: at 20g with no contact opening >10s on the N.O. contact; at 5g with no contact opening >10s on the N.C. contact. Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Creepage/Clearance, Coil to Contact: 10/10mm. Termination: Printed circuit terminals. Enclosures: RT 1, 2, 3, 4: Flux-tight, top vented, plastic case. RT B, C, D, E: Immersion cleanable, plastic case. Weight: 0.42 oz. (12g) approximately. Dimensions are shown for 448 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information (AC Coil Model) Typical Part Number B RT D 1 4 524 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). 2 = 1 pole 12A, Pinning 5mm, flux-tight (Code 2). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). C = 1 pole 12A, Pinning 5mm, sealed (Code 2). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram codes 1, 2 or 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1, 2 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10. 5. Coil Voltage: 524 = 24VAC 615 = 115VAC 730 = 230VAC Note: All AC coil model RT part numbers are Schrack brand, are orange in color and have UL Class F (155C) coil construction. Our authorized distributors are more likely to stock the following items for immediate delivery. RTE24524 RTE24615 RTE24730 RTD14524 RTD14615 RTD14730 Breaking Capacity Outline Dimensions 1 Pole .50 (12.7) .62 (15.7) 6X .031 X .020 (.80 X .52) 50 50 Contact Current A 1.14 (29) 2X .020 X .020 (.52 X .52) .17 (4.3) 10 B 5 2 1 0.5 0.1 10 PC Board Layouts (Bottom View) 1 Pole 12A 3.5mm .051 DIA. (1.30) 20 50 100 DC Voltage 200 300 10 5 2 1 A B 0.5 0.1 10 20 50 100 DC Voltage 200 300 A: 1 Contact. B: 2 Contacts in series. A: 16A Version. B: 12A Version. 1 Pole 16A 2 Pole 8A 5mm 1 Pole 12A 5mm .051 DIA. (1.30) 2 Pole Contact Current RTB14524 RTB14615 RTB14730 .051 DIA. (1.30) Contact Life for Resistive AC Load (Typical) .400 (10.16) .400 (10.16) .800 (20.32) .800 (20.32) .051 DIA. (1.30) .051 DIA. (1.30) .300 (7.62) Code 1 107 .300 (7.62) Code 2 .800 (20.32) .051 DIA. (1.30) .300 (7.62) Operations .276 (7.0) A: 8A Model B: 12A Model C: 16A Model 106 B 105 A C Code 3 & 5 Notes: 1. On single throw models, only necessary terminals are present. 2. With the recommended PCB hole sizes, a grid with a pattern from 0.0984 to 0.1 in (2.5 - 2.54 mm) can be used. 104 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 Breaking Capacity (kVA) Note: Data from 250VAC @ 70C. Wiring Diagrams (Bottom View) 1 Pole 12A 1 Pole 16A 2 Pole 8A Codes 1 & 2 Code 3 Code 5 Note: On single throw models, only necessary terminals are present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 449 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RT series Sockets and Accessories File E135149 File LR14385 NR 5318 RP78601 RT78625 with RPMU0730 RT16016 Sockets for RT Series Relays RT786241 RT786251,2 RT786261,2 10A, 300VAC 3.5mm Pinning 1 Pole 10A, 250VAC 2 Pole 2x 10A, 250VAC 5mm Pinning 1 Pole 12A, 300VAC 2 Pole 2x 12A, 300VAC 5mm Pinning 21 11 21 11 22 12 14 24 14 21 11 24 14 2.972 (75.5) 2.972 (75.5) A1 A2 .610 (15.5) A2 A1 22 12 .610 (15.5) .874 (22.2) .177 (4.5) Relay 2.972 (75.5) .177 (4.5) Ejector Module A1 A2 .610 (15.5) .874 (22.2) .874 (22.2) .177 (4.5) 1.693 (43) 1.693 (43) Hold-Down Spring RT16016 2.283 (58) Ejector/Hold-Down Spring RT160163 Hold-Down Spring RT16016 RP786011 RP786021 10A, 250VAC 3.5mm Pinning 1 Pole 10A, 250VAC 2 Pole 2x 10A, 250VAC 5mm Pinning PC Board Layout (Bottom View) PC Board Layout (Bottom View) .20 (5.08) .138 (3.51) 1.22 (31.0) 1.22 (31.0) .425 (10.8) .5 (12.7) .189 (4.8) .189 (4.8) .425 (10.8) .80 (20.32) .662 (16.82) .5 (12.7) .30 (7.62) .354 (9.0) O .06 DIA. (1.52) Hold-Down Spring RP16041 .189 (4.8) .189 (4.8) .354 (9.0) .60 (15.24) .20 (5.08) .30 (7.62) O .06 DIA. (1.52) Hold-Down Spring RP16041 Socket and Accessory Selection Table Stock items are boldfaced. Socket Socket Termination RT786241,2 RT786251,2 RT786261 RP786011 RP786021 RPMT00A0 RPMU0548 RPMU0730 RPML0024 RPML0524 RPML0110 RPML0730 Hold-Down Spring DIN Screw Terminal Socket DIN Screw Terminal Socket DIN Screw Terminal Socket PCB Terminal Socket PCB Terminal Socket Protection Diode Module 1N40074 RC Network Module 24-48VAC RC Network Module 110-230VAC LED Module 12-24VDC4 LED Module 12-48VAC/VDC LED Module 110VDC4 LED Module 110-230VAC Dimensions are shown for 450 reference purposes only. RT16016 RT16016 RT16016 RY16041 RY16041 - - - - - - - Dimensions are in inches over (millimeters) unless otherwise specified. * Note 1. Not suitable for bistable relay with two coils. 2. For a 16A 1 pole relay the following jumpers have to be connected; 11 to 21, 12 to 22 and 14 to 24. 3. Insertion of the relay. First the ejector (and eventually the module) has to be mounted onto the socket. Then the relay has to be set in the correct position and pressed into the socket until the ejector snaps over the top of the relay. 4. Standard polarity: A1:+, A2:- Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RT series (Sensitive) 10 Amp, 1 Pole PC Board Relay with 250mW Coil File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data * * * * Termination: Printed circuit terminals. Enclosure (94 V-0 Rated): Flux-tight (RT II) or sealed (RT III) plastic case. Weight: .49 oz. (14 g) approximately. Sensitive coil requires only 250mW. 10A contacts in 1 Form A (SPST-NO) or 1 Form C (SPDT) arrangement. UL Class F coil construction. 5kV/10mm contact-to-coil. Contact Life Contact Data Arrangements: 1 Form A (SPST-NO) or 1 Form C (SPDT), single contact. Material: Silver-nickel 90/10. Expected Mechanical Life: 30 million operations. Ratings: Current: 10A. Voltage: 250VAC. Power (breaking): 2,500 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 15A. Load/Life 8A, 250VAC; 430,000 ops. 370W, 230VAC, compressor, NO contact; >330,000 ops. 550W, 250VAC, incandescent, NO contact; 190,000 ops. 0.8Apeak /0.08A, 230VAC, cos=0.23, contactor 190 / 90 VA, NO contact; >8.8 million ops. Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms Between Coil and Contacts: 5,000Vrms. Creepage/Clearance: 10/10mm. Coil Data DC @ 20C Nominal Coil Power: 250mW. Nominal Voltage VDC 5 6 12 24 48 60 DC Resistance in Ohms 100 144 576 2,304 9,216 12,857 10% 10% 10% 10% 10% 12% Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC Nominal Coil Current (mA) 3.7 4.5 9.0 18.0 36.0 45.0 0.5 0.6 1.2 2.4 4.8 6.0 15.0 18.0 36.0 72.0 144.0 180.0 50.0 41.7 20.8 10.4 5.4 4.7 Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 7 ms. Release Time (typical): 3 ms. Bounce Time (typical): NO: 2 ms; NC: 4 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Environmental Data Nominal coil voltage (Un) Temperature Range: Operating: -40C to +85C. Vibration (30-150 Hz.): 5g. Shock (destructive): 100g. Dimensions are shown for reference purposes only. Applied coil voltage (U/Un) Coil Operating Range Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 451 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RT 1 7 4 012 1. Basic Series: RT = Printed circuit board relay. 2. Version: 1 = 10A, 3.5mm pin spacing, flux-tight case. B = 10A, 3.5mm pin spacing, sealed case. 3. Contact Configuration: 7 = 1 Form C (SPDT) 8 = 1 Form A (SPST-NO) 4. Contact Material: K = Silver-nickel 90/10. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC 060 = 60VDC Stock Items - Authorized distributors are more likely to stock the following items. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) .50 (12.7) 1.14 (29.0) .62 (15.7) 1 Form C .150 (3.8) 1 Form A PC Board Layouts (Bottom Views) .051 + .004 DIA. (1.3 + .1) .099 GRID* (2.52) 1 Form C .090 (2.3) .138 (3.5) .138 (3.5) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. .051 + .004 DIA. (1.3 + .1) .099 GRID* (2.52) 1 Form A .090 (2.3) .138 (3.5) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. Dimensions are shown for 452 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RTH series 10-16 Amp, 1 Pole PC Board Relay for Operation to 105C File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * * * * * Temperature Range: Operating: -40C to +105C. Vibration (30-150 Hz.): Standard Coil NO / NC: 20 / 5g. Sensitive Coil: 5g. Shock (destructive): 100g. Sensitive (250mW) version with 10A, 1 Form A (SPST-NO) contacts. 16A version with 1 Form A (SPST-NO) or 1 Form C (SPDT) contacts. UL Class F coil construction. 5kV/10mm contact-to-coil. DC coil. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). 1 Form C not available with sensitive coil. Material: Silver-nickel 90/10. Expected Mechanical Life: 10 million operations. Ratings: Current: Standard Coil: 16A; Sensitive Coil: 10A. Voltage: 250VAC. Power (breaking): Standard Coil: 4,000 VA; Sensitive Coil: 2,500VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): Standard Coil: 30A; Sensitive Coil: 15A. Load/Life - Standard Coil - Standard 1 Form A Contact 10 amp, 250VAC, 105C; 150,000 ops. 16 amp, 250VAC, 105C; 20,000 ops. Load/Life - Standard Coil - High Performance 1 Form A Contact 10 amp, 250VAC, 105C; 300,000 ops. 16 amp ON / 8 amp OFF, 250VAC, 105C; 250,000 ops. Load/Life - Sensitive Coil - 1 Form A Contact 12 amp, 250VAC, 105C, dry switching; >500,000 ops. 10 amp, 250VAC, cyclical heat 105/40C; 200,000 ops. 10 amp, 250VAC, 105C; 150,000 ops. Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 Rated): Flux-tight (RT II) plastic case. Weight: .49 oz. (14 g) approximately. Contact Life Models with Sensitive Coil Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms Between Coil and Contacts: 5,000Vrms. Creepage/Clearance: 10/10mm. Coil Data DC @ 20C Nominal Coil Power: Sensitive Coil: 250mW.; Standard Coil: 400mW Standard coil continuous thermal load >10A at 105C requires reduction of coil power to 64% of nominal after 100ms. Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC Sensitive Coils (10A max. rating, 1 Form A only) 12 576 9.0 1.2 36.0 24 2,304 18.0 2.4 72.0 Standard Coils (16A max. rating, 1 Form A or 1 Form C) 9 203 6.3 0.9 22.9 12 360 8.4 1.2 30.6 24 1,440 16.8 2.4 61.2 Nominal Coil Current (mA) Models with Standard Coil Coil Operating Range 44.3 33.3 16.7 Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): Standard Coil: 7 ms. Sensitive Coil: 8 ms. Release Time (typical): Standard or Sensitive Coil: 3 ms. Bounce Time (typical): Standard Coil NO / NC: 1 / 3 ms. Sensitive Coil: 2 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Nominal coil voltage (Un) Models with Standard Coil Dimensions are shown for reference purposes only. Models with Sensitive Coil 20.8 10.4 Applied coil voltage (U/Un) DC Resistance in Ohms 10% Applied coil voltage (U/Un) Nominal Voltage VDC Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Nominal coil voltage (Un) Models with Sensitive Coil www.tycoelectronics.com Technical support: 453 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RTH 1 4 012 1. Basic Series: RTH = Printed circuit board relay for high temperature (105C) applications. 2. Coil Type and Contacts: 1 = Standard coil, standard 1 Form C (SPDT) contacts, 16A rating 3 = Standard coil, standard 1 Form A (SPST-NO) contacts, 16A rating H = Standard coil, "high performance" 1 Form A (SPST-NO) contacts, 16A rating 8 = Sensitive coil, standard 1 Form A (SPST-NO) contacts, 10A rating 3. Contact Material: 4 = Silver-nickel 90/10. 4. Coil Voltage: 009 = 9VDC (standard version coil only) 012 = 12VDC 024 = 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) .50 (12.7) 1.14 (29.0) .62 (15.7) 1 Form C, Standard Coil Only .150 (3.8) 1 Form A, Standard or Sensitive Coil PC Board Layouts (Bottom Views) .051 + .004 DIA. (1.3 + .1) .099 GRID* (2.52) 1 Form C, Standard Coil Only .090 (2.3) .197 (5.0) .197 (5.0) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. .051 + .004 DIA. (1.3 + .1) .099 GRID* (2.52) 1 Form A, Standard or Sensitive Coil .090 (2.3) .197 (5.0) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. Dimensions are shown for 454 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RT series (High Inrush) 16 Amp, 1 Pole PC Board Relay for Inrush Currents to 80A File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features * * * * * Contact Life Capable of handling 80A inrush currents. 16A, 1 Form A (SPST-NO) contacts. UL Class F coil construction. 5kV/10mm contact-to-coil. 400mW DC coil. Contact Data Arrangements: 1 Form A (SPST-NO), single contact. Material: Silver-nickel 90/10 or Silver-tin oxide. Expected Mechanical Life: 30 million operations. Ratings: Current: 16A. Voltage: 250VAC. Power (breaking): 4,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 30A. Peak Inrush Current (20ms): 80A. Load/Life - Silver-nickel contacts 1000W, 250VAC, incandescent lamps; 90,000 ops. Load/Life - Silver-tin oxide contacts 1000W, 250VAC, incandescent lamps; 80,000 ops. Compressor, 230VAC, Iin21Apeak, Ioff=3.5A, cos=0.5; 230,000 ops. Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000Vrms Between Coil and Contacts: 5,000Vrms. Creepage/Clearance: 10/10mm. Coil Data DC @ 20C Nominal Coil Power: 400mW. Nominal Voltage VDC 360 1,440 5,520 7,340 10% 10% 10% 12% Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC Nominal Coil Current (mA) 8.4 16.8 33.6 42.0 1.2 2.4 4.8 6.0 30.6 61.2 122.4 153.0 33.3 16.7 8.7 8.1 Operate Data Coil Operating Range Must Operate Voltage: See Coil Data table. Operate Time (typical): 8 ms. Release Time (typical): 3 ms. Bounce Time (typical): 2 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Applied coil voltage (U/Un) 12 24 48 60 DC Resistance in Ohms Environmental Data Temperature Range: Operating: -40C to +85C. Vibration (30-500 Hz.): 20g. Shock (destructive): 100g. Nominal coil voltage (Un) Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 Rated): Flux-tight (RT II) plastic case. Weight: .49 oz. (14 g) approximately. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 455 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number 1. Basic Series: RT = Printed circuit board relay. 2. Version: 3 = 16A, 5mm pin spacing, flux-tight case. 3. Contact Configuration: 3 = 1 Form A (SPST-NO) 4. Contact Material: K = Silver-nickel 90/10 contacts for high inrush currents. 5. Coil Voltage: 012 = 12VDC 048 = 48VDC 024 = 24VDC 060 = 60VDC B RT 3 3 K 012 L = Silver-tin oxide contacts for high inrush currents. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .50 (12.7) 1.14 (29.0) .62 (15.7) .150 (3.8) PC Board Layout (Bottom View) .051 + .004 DIA. (1.3 + .1) .090 (2.3) .099 GRID* (2.52) .197 (5.0) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. Dimensions are shown for 456 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0429 series High Inrush (80A/20ms), Miniature Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * 1 Form A (SPST-NO). * Tungsten prerun contact and silver-tin oxide contact. * 10 amp rated current, 80A/20ms inrush current. * 4kV/8mm contact-to-coil, insulation to VDE 0631 and 0700. * Sensitive coil (480mW). * Low-profile (.59 in [15 mm]) flux-tight case. * Well suited for lighting systems, motors, lamp loads. Must Operate Voltage: See Coil Data table. Operate Time (typical): 6 ms. Release Time (typical): 4 ms. Bounce Time (typical): 3 ms. Switching Rate: 6,000 ops./hr. max. at rated load. Contact Data Environmental Data Arrangements: 1 Form A (SPST-NO), single contact. Material: Tungsten prerun contact and silver-tin oxide contact. Expected Mechanical Life: 5 million operations. Ratings: Current: 10A. Current (making, max. 4s at 10% duty cycle): 16A. Current (peak inrush 20ms): 80A. Voltage: 250VAC. Voltage (breaking): 400VAC. Load/Life 10 amp resistive, 250VAC, 50,000 ops. 2,500W, incandescent lamps, 30,000 ops. 1,300W, fluorescent lamps (140F), 30,000 ops. 1,000W, Dulux lamps (140F), 30,000 ops. Temperature Range: Operating: -40C to +70C. Shock (destructive): 100g. Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Flux-tight (RTII) plastic case. Weight: 0.35 oz. (10 g) approximately. Coil Operating Range Applied coil voltage (U/Un) Initial Dielectric Strength Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Nominal Coil Power: 480mW. Nominal Voltage VDC 6 12 24 48 60 DC Resistance in Ohms 10% 80 300 1,200 4,825 7,500 Must Operate Voltage VDC 4.2 8.4 16.8 33.6 42.0 Drop-out Voltage VDC 0.4 0.9 1.8 3.6 4.5 Maximum Voltage VDC 12.0 24.0 48.0 96.0 120.0 Nominal Coil Current (mA) 75.0 40.0 20.0 10.0 8.0 Nominal coil voltage (Un) Ordering Information Typical Part Number B 0429 03 1. Basic Series: 0429 03 = Miniature printed circuit board relay for high inrush currents. 2. Coil Voltage: 16 = 6VDC 13 = 12VDC 08 = 24VDC 05 = 48VDC 3. Contact Material: 12 = Tungsten prerun contact and silver-tin oxide contact. 4. Version: 00 = Standard 13 12 00 03 = 60VDC Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. PC Board Layout (Bottom View) Outline Dimensions 1.12 (28.5) .492 (12.5) .051 + .004 DIA. (1.3 + .1) Wiring Diagram (Bottom View) .098 GRID (2.5) .59 (15.0) .087 (2.2) .197 (5.0) .138 + .020 (3.5 + .5) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 457 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OMI/OMIH series 16A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 VDE File No. 6678 SEMKO File No. 9517235 (OMI) 9143112 (OMIH) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Meet UL 508, VDE0435 and SEMKO requirements. * 1 Form A and 1 Form C contact arrangements. * Immersion cleanable, sealed version available. * Meet 5,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts (1.2 / 50s). Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy (OMI), AgSnO (OMIH). Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Contact Ratings Ratings: OMI: 10A @ 240VAC resistive, 10A @ 30VDC resistive, 3A @ 240VAC inductive (coso= 0.4), 3A @ 30VDC inductive (L/R=7msec). OMIH:16A @ 240VAC resistive, 16A @ 30VDC resistive, 4A @ 240VAC inductive (coso= 0.4), 4A @ 24VDC inductive (L/R=7msec). Max. Switched Voltage: AC: 250V. DC: 30V. Max. Switched Current: 10A (OMI), 16A (OMIH). Max. Switched Power: OMI: 2,400VA, 300W. OMIH: 3,800VA, 480W. OMI/OMIH-L Sensitive Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 10.9 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.50 0.60 0.90 1.20 2.40 4.80 Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 138.9 120.0 78.3 60.0 29.3 14.5 36 50 115 200 820 3,300 3.50 4.20 6.30 8.40 16.80 33.60 0.50 0.60 0.90 1.20 2.40 4.80 OMI/OMIH-D Standard Operate Data Must Operate Voltage: OMI/OMIH-D: 70% of nominal voltage or less. OMI/OMIH-L: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: OMI/OMIH-D: 15 ms max. OMI/OMIH-L: 20 ms max. Release Time: 8 ms max. Environmental Data Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Temperature Range: Operating: OMI/OMIH-D: -30C to +55C OMI/OMIH-L: -30C to +70 C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Coil Data Mechanical Data Voltage: 5 to 48VDC. Nominal Power: 720 mW (OMI-D), 540mW (OMI-L). Coil Temperature Rise: 45C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OMI/OMIH-SS: Vented (Flux-tight) plastic cover. OMI/OMIH-SH: Sealed plastic case. Weight: 0.46 oz (13g) approximately. Dimensions are shown for 458 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number 1. Basic Series: OMI = 10A rating B OEG OMIH -SH -1 24 L ,294 OMIH = 16A rating 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,300 = Standard model for "SS" enclosure ,394 = Standard model for "SH" enclosure Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. OMIH-SH-105L,394 OMIH-SH-112L,394 OMIH-SH-124L,394 OMIH-SH-105D,394 OMIH-SH-112D,394 OMIH-SH-124D,394 Wiring Diagram (Bottom View) Outline Dimensions .811 .02 (20.6 .5) .157 .012 (4.0 .3) .02 (.5) .012 (.3) .024 c (.60) .039 (1.0) .039 (1.0) .012 (.3) .100 .008 (2.55 .2) 1.15 .02 (29.2 .5) PC Board Layout (Bottom View) 3 - .059 DIA (1.5) .504 .02 (12.8 .5) .30 .008 (7.6 .2) .650 (16.5) .30 .004 (7.6 .1) 2 - .047 DIA (1.2) .144 (3.65) .138 .004 (3.5 .1) .138 .004 (3.5 .1) .650 .004 (16.5 .1) .138 (3.5) .138 (3.5) Reference Data Coil Temperature Rise Operate Time 60 12 50 10 40 8 Life Expectancy 100 OMIH type 240VAC, 24VDC Resistive 30 20 4 Operation (x 10 ) Time (msec) Temp. Rise (C) Operate Time 6 4 10 OMI type 250VAC, 30VDC Resistive 2 10 Release Time 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Coil Power (W) Dimensions are shown for reference purposes only. 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Coil Power (W) Dimensions are in inches over (millimeters) unless otherwise specified. 1 0 2 4 6 8 10 12 14 16 18 20 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 459 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OMI 2 Pole series 2 Pole Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 VDE File No. 6678 SEMKO File No. 9517235 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * Meet UL 508, VDE0435 and SEMKO requirements. * 2 Form A and 2 Form C contact arrangements. * Immersion cleanable, sealed version available. * Meet 5,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts (1.2 / 50s). Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 10.9 47 68 155 270 1,100 4,400 4.00 4.80 7.20 9.60 19.20 38.40 0.50 0.60 0.90 1.20 2.40 4.80 Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 138.9 120.0 78.3 60.0 29.3 14.5 36 50 115 200 820 3,300 3.75 4.50 6.75 9.00 18.00 36.00 0.50 0.60 0.90 1.20 2.40 4.80 Contact Data @ 20C Arrangements: 2 Form A (DPST-NO) and 2 Form C (DPDT). Material: Ag Alloy. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Contact Ratings Ratings: 5A @ 240VAC resistive, 5A @ 120VAC resistive, 5A @ 30VDC resistive, 1/8 HP @ 250VAC. OMI-L Sensitive OMI-D Standard Operate Data 1.5A @ 240VAC inductive (coso= 0.4), 1.5A @ 120VAC inductive (coso= 0.4), 1.5A @ 24VDC inductive (L/R=7msec). Max. Switched Voltage: AC: 240V. DC: 30V. Max. Switched Current: 5A. Max. Switched Power: OMI: 1,200VA, 150W. Must Operate Voltage: OMI-D: 75% of nominal voltage or less. OMI-L: 80 % of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: OMI-D: 15 ms max. OMI-L: 20 ms max. Release Time: 8 ms max. Environmental Data Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Temperature Range: Operating: OMI-D: -30C to +55C OMI-L: -30C to +70 C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Coil Data Mechanical Data Voltage: 5 to 48VDC. Nominal Power: 720mW (OMI-D), 540mW (OMI-L). Coil Temperature Rise: 45C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OMI-SS: Vented (Flux-tight) plastic cover. OMI-SH: Sealed plastic case. Weight: 0.46 oz (13g) approximately. Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Initial Insulation Resistance Dimensions are shown for 460 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number OEG B OMI -SS -2 12 L M ,594 1. Basic Series: OMI = 2 Pole Miniature Power PC Board Relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 2 = 2 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 2 Form C, DPDT M = 2 Form A, DPST-NO 7. Suffix: ,500 = Standard model for "SS" enclosure ,594 = Standard model for "SH" enclosure Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to stock the following items for immediate delivery. OMI-SH-205D,594 OMI-SH-212D,594 OMI-SH-224D,594 OMI-SH-205L,594 OMI-SH-212L,594 OMI-SH-224L,594 Wiring Diagram (Bottom View) Outline Dimensions .811 .02 (20.6 .5) .024 c (.60) .157 .012 (4.0 .3) .012 (.3) .012 (.3) 1.15 .02 (29.2 .5) .039 (1.0) .012 (.3) .100 .008 (2.55 .2) .30 .008 (7.6 .2) .2 (5.08) .6 (15.24) .039 (1.0) PC Board Layout (Bottom View) 6 - .059 DIA (1.5) .504 .02 (12.8 .5) .30 .004 (7.6 .1) 2 - .039 DIA (1.0) .144 (.067) .2 (5.08) .2 (5.08) .2 (5.08) .600 (15.24) Reference Data Operate Time 50 10 40 8 30 20 Life Expectancy 100 240VAC, 24VDC Resistive 4 12 Operation (x 10 ) 60 Time (msec) Temp. Rise (C) Coil Temperature Rise Operate Time 6 4 10 2 10 Release Time 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Coil Power (W) Dimensions are shown for reference purposes only. 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Coil Power (W) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 1 0 1 2 4 3 5 Contact Curr ent (A) www.tycoelectronics.com Technical support: 461 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OZ/OZF series 16A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E82292 CSA File No. LR48471 TUV File No. R85447 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Meet UL 508, CSA and TUV requirements. * 1 Form A and 1 Form C contact arrangements. * Immersion cleanable, sealed version available. * Meet 5,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts (1.2 / 50s). * Quick Connect Terminal type available (OZF). * UL TV-8 rating available (OZT). Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy (1 Form C) and AgSnO (1 Form A). Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Contact Ratings Ratings: OZ/OZF: 20A @ 120VAC resistive, 16A @ 240VAC resistive, 5A @ 120VAC inductive (coso= 0.4), 5A @ 24VDC inductive ( L/R= 7msec). OZT: 8A @ 240VAC resistive, TV-8 @ 120VAC tungsten, 25,000ops. Max. Switched Voltage: AC: 240V. DC: 110V. Max. Switched Current: 16A (OZ/OZF), 8A (OZT). Max. Switched Power: 3,850VA, 600W. OZ-L Sensitive Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 10.9 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.25 0.30 0.45 0.60 1.20 2.40 Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 138.9 120.0 78.3 60.0 29.3 14.5 36 50 115 200 820 3,300 3.50 4.20 6.30 8.40 16.80 33.60 0.25 0.30 0.45 0.90 1.20 2.40 OZ-D Standard Operate Data Must Operate Voltage: OZ-D: 70% of nominal voltage or less. OZ-L: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: OZ-D: 15 ms max. OZ-L: 20 ms max. Release Time: 8 ms max. Environmental Data Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Initial Insulation Resistance Temperature Range: Operating: OZ-D: -30C to +55C OZ-L: -30C to +70 C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Mechanical Data Coil Data Voltage: 5 to 48VDC. Nominal Power: 720 mW (OZ-D), 540mW (OZ-L). Coil Temperature Rise: 45C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 462 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OZ-S: Vented (Flux-tight) plastic cover. OZF-SS: Vented (Flux-tight) plastic cover. OZ-SH: Sealed plastic case. Weight: 0.46 oz (13g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OZ OEG -SH -1 24 L M 1 ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Suffix: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Suffix = Custom model ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-124D,294 OZ-SH-105LM1,294 OZ-SH-105D,294 OZ-SH-112D,294 OZ-SH-124L,294 OZ-SH-105L,294 OZ-SH-112L,294 OZ-SH-112LM1,294 OZ-SH-124LM1,294 Outline Dimensions PC Board Layouts (Bottom View) .092 .012 (2.35 .3) .266 .012 (6.75 .3) .2 .002 (.5 .05) OZF OZ .134 (3.4) .187 (4.75) .061 DIA (1.55) .224 (5.7) .126 (3.2) .811 .02 (20.6 .5) .024 c (.60) .012 (.3) 1.15 .02 (29.2 .5) .295 .012 (7.5 .3) .59 .012 (15.0 .3) .073 .012 (1.85 .3) .197 .012 (5.0 .3) 8 - .059 DIA (1.5) .295 .012 (7.5 .3) .197 .012 (5.0 .3) .945 .08 (24.0 .2) .157 .012 (4.0 .3) .012 .047 (.3) (1.2) .012 (.3) OZ .25 (6.35) .197 .012 (5.0 .3) .600 .012 (15.24 .3) .047 (1.2) .165 .012 (4.2 .3) .024 .004 (0.6 .1) .504 .02 (12.8 .5) 1.14 .02 (29.0 .5) .047 (1.2) .047 (1.2) .098 .004 (2.5 .1) .394 (10.0) .073 (1.85) 2 - .047 DIA 2 - .059 DIA (1.5) (1.2) .394 .006 (10.0 .15) .300 .004 (7.6 .1) .394 .006 (10.0 .15) .300 .004 (7.6 .1) .085 .012 (2.15 .3) .197 .012 (5.0 .3) OZF .047 (1.2) 1.02 .008 (26.0 .2) 1.02 .02 (26.0 .5) Wiring Diagrams OZ OZF * (Bottom View) (Bottom View) Reference Data Operate Time Operating Voltage 100 13A 8A 16A 140 Operating Votage Range 120 100 Maximum Allowable Coil Voltage 10 13A/16A 80 Cool Coil 8A 240VAC Resistive Operate Time Hot Coil Applied Pick-Up Voltage Operation (x 104) 160 40 Life Expectancy 12 Time (msec) % of Supplying Voltage to Coil 180 60 * No electrical connection, for board attachment only. (Top View) 8 6 4 10 2 20 Release Time 0 -40 -20 0 20 40 60 80 100 120 140 0.2 0.6 0.8 1.0 1.2 1.4 1 0 Coil Power (W) Ambient Temp. (C) Note: This data is based on the max. allowable temperature for E type insulation coil (115C). Dimensions are shown for reference purposes only. 0.4 Dimensions are in inches over (millimeters) unless otherwise specified. 2 4 6 8 10 12 14 16 18 20 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 463 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OMIT series 10A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 VDE File No. 6678 SEMKO File No. 8713114 SEV File No. 97550375 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C OMIT-L Sensitive Features * Meet UL 508, VDE0435, SEMKO and SEV requirements. * 1 Form A contact arrangements. * UL TV-5 rating available. * Immersion cleanable, sealed version available. * Meet 5,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts (1.2 / 50s). Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 10.9 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.25 0.30 0.45 0.90 1.20 2.40 Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 138.9 120.0 78.3 60.0 29.3 14.5 36 50 115 200 820 3,300 3.50 4.20 6.30 8.40 16.80 33.60 0.25 0.30 0.45 0.90 1.20 2.40 Contact Data @ 20C Arrangements: 1 Form A. Material: AgSnO Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Contact Ratings Ratings: 10A @ 240VAC resistive, TV-5 @ 120VAC tungsten 25,000ops. Max. Switched Voltage: AC: 240V. DC: 30V. Max. Switched Current: 10A. Max. Switched Power: 2,400VA, 300W. Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. OMIT-D Standard Operate Data Must Operate Voltage: OMIT-D: 70% of nominal voltage or less. OMIT-L: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: OMIT-D: 15 ms max. OMIT-L: 20 ms max. Release Time: 8 ms max. Environmental Data Temperature Range: Operating: OMT-D: -30C to +55C OMT-L: -30C to +70 C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Coil Data Voltage: 5 to 48VDC. Nominal Power: 720 mW (OMI-D), 540mW (OMI-L). Coil Temperature Rise: 45C max., at rated coil voltage (OMI-D). 35C max., at rated coil voltage (OMI-L). Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 464 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OMIT-SS: Vented (Flux-tight) plastic cover. OMIT-SH: Sealed plastic case. Weight: 0.46 oz (13g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG OMIT -SS -1 12 L M ,300 1. Basic Series: OMIT = Miniature Sealed PC Board Relay 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,300 = Standard model for "SS" enclosure ,394 = Standard model for "SH" enclosure Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for imnmediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .811 .02 (20.6 .5) .024 c (.60) .157 .012 (4.0 .3) .012 (.3) .012 (.3) .039 (1.0) .039 (1.0) PC Board Layout (Bottom View) .100 .008 (2.55 .2) 1.15 .02 (29.2 .5) .300 .008 (7.6 .2) 2 - .059 DIA (1.5) .504 .02 (12.8 .5) 2 - .047 DIA (1.2) .300 .008 (7.6 .2) .144 .138 (3.65) (3.5) .787 (20.0) .138 .004 (3.5 .1) .787 .004 (20.0 .1) Reference Data Operate Time 50 10 40 8 30 20 Life Expectancy 100 240VAC Resistive 4 12 Operation (x 10 ) 60 Time (msec) Temp. Rise (C) Coil Temperature Rise Operate Time 6 4 10 2 10 Release Time 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Coil Power (W) Dimensions are shown for reference purposes only. 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 0 Coil Power (W) Dimensions are in inches over (millimeters) unless otherwise specified. 1 2 3 4 5 6 7 8 9 10 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 465 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OMIF series 20A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E82292 CSA File No. LR48471 VDE File No. 6031 TUV File No. R85447 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data * Meet UL 508, CSA, VDE0435 and TUV requirements. * 1 Form A contact arrangements. * Quick Connect Terminal type. * Meet 5,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts (1.2 / 50s). Voltage: 12 to 24VDC. Nominal Power: 540mW. Coil Temperature Rise: 35C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Coil Data @ 20C OMIF Contact Data @ 20C Arrangements: 1 Form A. Material: AgSnO Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Rated Coil Voltage (VDC) Nominal Current (mA) 12 18 24 44.4 30.0 21.8 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 270 600 1,100 9.00 13.50 18.00 0.60 0.90 1.20 Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 20 ms max. Release Time: 10 ms max. Contact Ratings Ratings: 20A @ 125VAC resistive. 16A @ 250VAC resistive, 16A @ 24VDC resistive. Max. Switched Voltage: AC: 250V. DC: 24V. Max. Switched Current: 20A. Max. Switched Power: 4,000VA, 385W. Environmental Data Initial Dielectric Strength Temperature Range: Operating: -30C to +70C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Mechanical Data Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Dimensions are shown for 466 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals with quick connect terminals. Enclosure (94V-0 Flammability Ratings): OMIF-S: Vented (Flux-tight) plastic cover. Weight: 0.53 oz (15g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG OMIF -S -1 24 L M ,300 1. Basic Series: OMIF = 20A PC Board Terminals 2. Enclosure: S = Vented (Flux-tight)* plastic cover 3. Termination: 1 = 1 pole 4. Coil Voltage: 12 = 12VDC 18 = 18VDC 24= 24VDC 5. Coil Input: L = Sensitive (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Suffix: ,300 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagram .092 - .012 (2.35 - .3) .266 - .012 (6.75 - .3) .020 (.5) .224 (5.70) .187 (4.75) .126 (3.2) (Top View) .061 DIA (1.55) .25 (6.35) .134 (3.4) (Bottom View) .964 - .012 (24.5 - .3) .189 - .012 (4.8 - .3) .024 c - .004 (.60 - .1) .020 (.5) .020 (.5) .039 (1.0) .039 (1.0) PC Board Layout (Bottom View) 1.14 - .02 (29.0 - .5) 2 - .059 DIA (1.5) .496 - .012 (12.6 - .3) .300 - .010 (7.6 - .25) .300 .004 (7.6 .1) 2 - .047 DIA (1.2) .075 - .008 (1.90 - .2) .787 - .010 (20.0 - .25) 1.00 - .010 (25.4 - .25) .098- .008 (2.50 - .2) .138 - .010 (3.5 - .25) .142 - .004 (3.60 - .1) .138 .004 (3.5 .1) .787 .004 (20.0 .1) Reference Data Operating Voltage Operate Time 13A-16A Operating Votage Range Maximum Allowable Coil Voltage 100 80 60 8A 40 20 13A-16A 10 Cool Coil Hot Coil Applied 240VAC Resistive Operate Time Operation (x 104) 120 100 0A-8A 160 140 Life Expectancy 12 Time (msec) % of Supplying Voltage to Coil 180 8 6 4 2 Release Time Pick-Up Voltage 0 -40 -20 0 10 20 40 60 80 100 120 140 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 0 Ambient Temp. (C) 2 4 6 8 10 12 14 16 18 20 Contact Current (A) Coil Power (W) Note: This data is based on the max. allowable temperature for E type insulation coil (115C). Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 467 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCI series Slim 2 Form A Miniature PC Board Relay Appliances, Audio Equipment, Office Machines UL File No. E82292 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Slim and simple architecture. * 2 Form A (DPST-NO) contact arrangement. * Cadmium-free contacts. * UL, CSA, approvals. * Immersion cleanable, sealed version available. * Magnetic blow-out available for DC loads. Contact Data @ 20C PCI Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% 5 6 9 12 24 69.4 58.8 39.1 29.1 14.5 72 102 230 413 1,650 Must Operate Voltage (VDC) 3.50 4.20 6.30 8.40 16.80 Arrangements: 2 Form A (DPST-NO). Material: Ag-GS Alloy. Max. Switching Rate: 300ops./ min. (no load). 30ops./ min. (rated load). Expected Mechanical Life: 1 million ops (no load). Expected Electrical Life: 100,000 ops (rated load). Minimum Load: 1mA @ 1VDC. Initial Contact Resistance: 50 milliohms @ 1mA, 6VDC. Operate Data @ 20C Contact Ratings Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time : 15ms max. Release Time : 5ms max. Ratings: 3A @ 24VDC resistive. 3A @ 120VAC resistive. Max. Switched Voltage: AC: 240V. DC: 50V. Max. Switched Current: 5A. Max. Switched Power: 300VA, 90W. Must Release Voltage (VDC) 0.50 0.60 0.90 1.20 2.40 Environmental Data Initial Dielectric Strength Between Open Contacts: 1,000VAC, 50/60 Hz. (1 min.). Between Adjacent Contacts: 2,000VAC, 50/60 Hz (1 min). Between Contacts and Coil: 4,000VAC, 50/60 Hz. (1 min.). Surge Voltage Between Coil and Contacts: 7,000V (1.2/50s). Temperature Range: Operating: -30C to +70C. Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Mechanical Data Initial Insulation Resistance Between Mutually Insulated Conductors: 1,000Mohm @ 500VDCM. Termination: Printed circuit terminals. Enclosure: Plastic sealed case with enclosure option "H". Otherwise, vented (flux-tight) cover. Weight: 0.41 oz (10.5g) approximately. Coil Data Voltage: 5 to 48VDC. Duty Cycle: Continuous. Nominal Power: 350mW. Max. Coil Power: 130% of nominal at 20C. Dimensions are shown for 468 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Typical Part Number B PCI OEG -2 05 D M ,000 1. Basic Series: PCI = Miniature relay 2. Termination: 2 = 2 pole 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 4. Coil Input: D = Standard 5. Contact Arrangement: M = 2 Form A 6. Enclosure: Blank = Vented (Flux-tight) cover H = Sealed plastic case 7. Optional: Blank = Standard M = with magnetic blow-out 8. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) .984 .02 (25.0 .5) .016 (.4) .018 c (.45) .039 (1.0) .039 (1.0) .157 .008 (4.0 .2) .016 (.4) PC Board Layout (Bottom View) .016 (.4) .295 .004 (7.5 .1) .59 .004 (15.0 .1) .094 (2.4) .59 .008 (15.0 .2) .197 .008 (5.0 .2) .945 .008 (24.0 .2) 4 - .051 DIA (1.3) 2 - .039 DIA (1.0) .295 .012 .394 .008 (10.0 .2) (7.5 .3) .197 .004 (5.0 .1) DC Cut Ability for Audio Speaker Loads 100 40 20C 0A 30 85C 3A 20 10 85C 0A 160 Operating Votage Range 140 Maximum Allowable Coil Voltage 120 100 Hot Coil (3A) 80 60 Cool Coil 40 20 0.2 0.3 0.4 0.5 0.6 0.7 -40 -20 0 4 70 60 Magnet Model 50 40 30 20 40 60 80 100 120 140 10 0 0 Ambient Temp. (C) Coil Power (W) 6 80 non Magnet Model 20 Pick-Up Voltage 0 0.1 8 90 180 Contact Voltage (VDC) 20C 3A 50 Temp. Rise (C) % of Supplying Voltage to Coil 60 2 4 6 8 10 12 14 16 18 20 22 24 Contact Current (A) Note: This data is based on the max. allowable temperature for E type insulation coil (115C). Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 469 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OSA series 2 Pole Miniature Power PC Board Relay Appliances, Audio Equipment, Office Machines UL File No. E82292 CSA File No. LR48471 SEMKO File No. 9452086 (available for DM5) TUV File No. R9551879 (available for DM5) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Meet UL TV-3 and CSA TV-4 rating available for DM5 type. * 2 Form A contact arrangements. * Immersion cleanable, sealed version available. * Meet 3,000V dielectric voltage between coil and contacts. * Meet 5,000V surge voltage between coil and contacts (1.2 / 50s). Contact Data @ 20C Arrangements: 2 Form A (DPST-NO). Material: Ag-GS Alloy (DM3) and AgSnO (DM5). Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: OSA-DM3: 1mA @ 1VDC. OSA-DM5: 100mA @ 5VDC. Initial Contact Resistance: 50 milliohms @ 1A, 6VDC. Contact Ratings Ratings: OSA-DM3: 3A @ 120VAC resistive, 3A @ 24VDC resistive, OSA-DM5: 5A @ 240VAC resistive, 5A @ 30VDC resistive, TV-3 @ 120VAC Tungsten (UL), TV-4 @ 120VAC Tungsten (CSA). Max. Switched Voltage: OSA-DM3: AC: 240V.DC: 50V. OSA-DM5: AC: 250V.DC: 30V. Max. Switched Current: 5A Max. Switched Power: OSA-DM3: 300VA. OSA-DM5: 1,100VA. OSA Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 11.0 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.50 0.60 0.90 1.20 2.40 4.80 Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time:20 ms max. Release Time: 10 ms max. Environmental Data Temperature Range: Operating:-30C to +60C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 3,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 5,000V (1.2 / 50s). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Coil Data Voltage: 5 to 48VDC. Nominal Power: 540 mW Coil Temperature Rise: 50C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 470 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OSA-SS: Vented (Flux-tight) plastic cover. OSA-SH: Sealed plastic case. Weight: 0.46 oz (13g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG OSA -SS -2 24 D M 3 ,000 1. Basic Series: OSA = Miniature Power PC board relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 2 = 2 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: M = 2 Form A, DPST-NO 7. Contact Rating: 3 = 3A @ 120VAC resistive (DM3). 8. Suffix: ,000 = Standard model 5 = 5A @ 240VAC resistive (DM5). Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .976 .02 (24.8 .5) .018 (.45) .157 .02 (4.0 .5) .012 (.3) .039 .004 (1.0 .1) .02 .039 .004 (.5) (1.0 .1) .106 .008 (2.7 .2) .96 .02 (24.4 .5) PC Board Layout (Bottom View) .508 .02 (12.9 .5) .295 .008 (7.5 .2) .59 .008 (15.0 .2) 4 - .047 DIA (1.2) .077 .008 (1.95 .2) .295 .004 (7.5 .1) 2 - .039 DIA (1.0) .106 .008 (2.7 .2) .197 .008 (5.0 .2) .59 .004 (15.0 .1) .096 .008 (2.45 .2) .197 .004 (5.0 .1) Reference Data Operate Time 12 50 10 40 8 30 20 Life Expectancy 100 DM5 Type, 240VAC, 30VDC Resistive Operation (x 104) 60 Time (msec) Temp. Rise (C) Coil Temperature Rise Operate Time 6 4 10 DM3 Type, 120VAC, 24VDC Resistive 2 10 Release Time 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.2 Coil Power (W) Dimensions are shown for reference purposes only. 0.4 0.6 0.8 1.0 1.2 1.4 1 0 Coil Power (W) Dimensions are in inches over (millimeters) unless otherwise specified. 1 2 4 3 5 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 471 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OSZ series 1 Pole Miniature Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E58304 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Meet UL Tungsten TV-8 rating. * 1 Form A contact arrangements. * Immersion cleanable, sealed version available. * Meet 4,000V dielectric voltage between coil and contacts. * Meet 7,000V surge voltage between coil and contacts (1.2 / 50s). Contact Data @ 20C Arrangements: 1 Form A (SPST-NO). Material: AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. OSZ Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 11.0 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.25 0.30 0.45 0.60 1.20 2.40 Operate Data Contact Ratings Ratings: 16A @ 240VAC resistive, 16A @ 24VDC resistive, TV-8 @ 120VAC Tungsten, 25,000ops. Max. Switched Voltage: AC: 240V. DC: 24V. Max. Switched Current: 16A. Max. Switched Power: 2,400VA, 380W. Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time:20 ms max. Release Time: 10 ms max. Environmental Data Temperature Range: Operating:-30C to +65C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 7,000V (1.2 / 50s). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Mechanical Data Coil Data Voltage: 5 to 48VDC. Nominal Power: 540 mW Coil Temperature Rise: 55C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 472 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OSZ-SS: Vented (Flux-tight) plastic cover. OSZ-SH: Sealed plastic case. Weight: 0.45 (13g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OSZ OEG -SS -1 12 D M 8 ,000 1. Basic Series: OSZ = Miniature Power PC board relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: M = 1 Form A, SPST-NO. 7. Contact Rating: 8 = TV-8 rating 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .976 .02 (24.8 .5) .012 (.3) .018 (.45) .02 (.5) .157 .02 (4.0 .5) .035 (.9) PC Board Layout (Bottom View) .035 (.9) 4 - .047 DIA (1.2) .96 .02 (24.4 .5) .295 .008 (7.5 .2) .077 (1.95) .508 .02 (12.9 .5) .295 .004 (7.5 .1) 2 - .039 DIA (1.0) .59 .004 (15.0 .1) .197 .008 (5.0 .2) .096 (2.45) .59 .008 (15.0 .2) .197 .004 (5.0 .1) Reference Data Coil Temperature Rise Operate Time 120 100 100 Operate Time 8A 80 Cool Coil 60 DM8 Type, 240VAC, 24VDC Resistive 10 4 16A Operating Votage Range 8A 16A Maximum Allowable Coil Voltage Operation (x 10 ) 160 140 Life Expectancy 12 Time (msec) % of Supplying Voltage to Coil 180 8 6 4 Hot Coil Applied 40 Pick-Up Voltage 10 DM5 Type, 240VAC,24VDC Resistive 2 Release Time 20 1 0 -40 -20 0 20 40 60 80 100 120 140 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 2 4 6 8 10 12 14 16 18 20 Contact Current (A) Coil Power (W) Ambient Temp. (C) Note: This data is based on the max. allowable temperature for E type insulation coil (115C). Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 473 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG SDT series 10 Amp Miniature Power PC Board Relay Appliances, HVAC, CTV, Monitor Display UL File No. E82292 CSA File No. LR48471 SEMKO File No. 9308008 TUV File No. R9551731 SEV File No. 97550375 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * UL TV-5 rating relay. * 1 Form A contact arrangement. * Immersion cleanable, sealed version available. * Applications include appliance, HVAC, CTV, monitor, emergency lighting. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) Material: AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. SDT Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 10.9 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.50 0.60 0.90 1.20 2.40 4.80 Operate Data Contact Ratings Ratings: 5A Tungsten @ 120VAC (TV-5) 25,000ops. 10A @ 250VAC resistive, 10A @ 120VAC resistive, 10A @ 30VDC resistive. Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 15 ms max. Release Time: 8 ms max. 3A @ 250VAC inductive (coso= 0.4), 3A @ 30VDC inductive (L/R=7msec). Max. Switched Voltage: AC: 250V. DC: 30V. Max. Switched Current: 10A. Max. Switched Power: 2,500VA, 300W. Initial Dielectric Strength Between Open Contacts: 900VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Environmental Data Temperature Range: Operating: -30C to +70C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Mechanical Data Coil Data Voltage: 5 to 48VDC. Nominal Power: 540 mW Coil Temperature Rise: 40C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 474 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): SDT-SS: Vented (Flux-tight) plastic cover SDT-SH: Sealed plastic case Weight: 0.39 oz (11g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG SDT -SS -1 12 D M ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: SS = Vented (Flux-tight) * plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .984 .02 (25.0 .5) PC Board Layout (Bottom View) .018 (.4) .012 (.3) .018 (.45) 4 -- .05 DIA (1.3) .031 (.8) .031 (.8) .96 .02 (24.4 .5) .295 - .004 (7.5 - .1) .295 .010 .409 .02 (7.5 .25) (10.4 .5) .646 - .004 (16.4 - .1) .38 - .004 (3.5 - .1) .38 .008 (3.5 .2) .100 (2.55) .646 .012 (16.4 .3) Reference Data Operating Voltage Operate Time 100 100 Operate Time 1A 5A 80 Cool Coil 1A 250VAC, 30VDC Resistive 10 4 Operating Votage Range 120 Maximum Allowable Coil Voltage Operation (x 10 ) 5A 140 Time (msec) % of Supplying Voltage to Coil 160 60 Life Expectancy 12 180 8 6 4 Hot Coil Applied 40 Pick-Up Voltage 10 2 Release Time 20 1 0 -40 -20 0 20 40 60 80 100 120 140 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 1 2 3 5 4 6 7 Contact Current (A) Coil Power (W) Ambient Temp. (C) Note: This data is based on the max. allowable temperature for E type insulation coil (115C). Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 475 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG SDT-R series 10 Amp Miniature Power PC Board Relay Appliances, HVAC, CTV, Monitor Display. UL File No. E58304 CSA File No. LR48471 SEMKO FileNo. 9722134, 9803052 TUV File No. R9750487 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * UL TV-5 and TV-8 rating relay. * 1 Form A contact arrangement. * Sensitive and standard coils available. * Applications include appliance, HVAC, CTV, Monitor, emergency lighting. Rated Coil Voltage (VDC) Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) Material: AgSnO Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Contact Ratings Ratings: SDT-LMR: 5A Tungsten @ 120VAC (TV-5) 25,000ops. 5A @ 250VAC resistive, 5A @ 30VDC resistive. SDT-DMR: 8A Tungsten @ 120VAC (TV-8) 25,000ops. 10A @ 250VAC resistive, 10A @ 30VDC resistive. Max. Switched Voltage: AC: 250V. DC: 30V. Max. Switched Current: 5A (SDT-LMR), 10A (SDT-DMR) Max. Switched Power: 1,250VA, 150W (SDT-LMR), 2,500VA, 300W (SDT-DMR). SDT-LMR (250mW) Nominal Current (mA) 5 6 9 12 24 50.0 41.7 27.7 20.7 10.5 Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 100 144 325 580 2,300 3.75 4.50 6.75 9.00 18.00 0.50 0.60 0.90 1.20 2.40 SDT-DMR (400mW) Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 10.9 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.50 0.60 0.90 1.20 2.40 4.80 Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time:15 ms max. Release Time: 5 ms max. Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Environmental Data Temperature Range: Operating: -30C to +70C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Coil Data Voltage: 5 to 48VDC. Nominal Power : SDT-LMR : 250 mW SDT-DMR : 540 mW Coil Temperature Rise: 40C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for 476 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): SDT-S: Snap-on dust cover (Flux-tight). Weight: 0.38 oz. (11g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B SDT OEG -S -1 12 L M R ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 5. Coil Input: L = Sensitive (250mW) 24 = 24VDC 48 = 48VDC D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .984 .012 (25.0 .3) .039 (1.0) .02 (.5) .018 (.45) .018 (.4) .008 (.2) .039 (1.0) PC Board Layout (Bottom View) 2 - .059 DIA (1.5) .394 .012 (10.0 .3) .295 (7.5) .295 .004 (7.5 .1) 2 - .05 DIA (1.3) .138 .008 (3.5 .2) .098 (2.5) .646 .012 (16.4 .3) .945 .012 (24.0 .3) .646 .004 (16.4 .1) .38 .004 (3.5 .1) Reference Data Operating Voltage (SDT-LMR) Operate Time Life Expectancy 24 100 160 Operating Voltage Range 120 100 80 Cool Coil 60 Hot Coil 5A Applied 40 250VAC Resistive (540mW Coil) 20 Maximum Allowable Coil Voltage Pick-Up Voltage Operation (x 104) 140 Time (msec) % of Supplying Voltage to Coil 180 16 12 Operate Time 8 10 250VAC Resistive (250mW Coil) 4 20 Release Time 1 0 -40 -20 0 20 40 60 80 100 120 140 0.2 Ambient Temp. (C) 0.4 0.6 0.8 1.0 1.2 1.4 0 Coil Power (W) 2 4 6 8 10 12 Contact Current (A) Note: This data is based on the max. allowable temperature for E type insulation coil (115C). Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 477 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCK series Slim 16 Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E82292 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * Slim outline to save board space. * 1 Form A contact arrangement. * Quick connect terminal type. * Meet 5,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) . Material: AgSnO. Max. Switching Rate: 300ops./ min. (no load). 20ops./ min. (rated load). Expected Mechanical Life: 2 million ops (no load). Expected Electrical Life: 100,000 ops (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. PCK Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% 5 6 9 12 18 24 100.0 83.3 55.6 41.7 27.8 20.9 50.0 72.0 162.0 288.0 648.0 1,150.0 Must Operate Voltage (VDC) Must Release Voltage (VDC) 3.75 4.50 6.75 9.00 13.50 18.00 0.25 0.30 0.45 0.60 0.90 1.20 Operate Data @ 20C Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 20ms max. Release Time: 10ms max. Contact Ratings Ratings: 16A @ 250VAC resistive. 16A @ 24VDC resistive. Max. Switched Voltage: AC: 277V. DC: 24V. Max. Switched Current: 16A. Max. Switched Power: 4,000VA, 385W. Environmental Data Initial Dielectric Strength Between Open Contacts: 1,000VAC, 50/60 Hz. (1 min.). Between Contacts and Coil: 5,000VAC, 50/60 Hz. (1 min.). Surge Voltage Between Coil and Contacts: 10,000V (1.2/50s). Temperature Range: Operating: -30C to +70C. Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. Shock, Mechanical: 1000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Conductors: 1,000Mohm @ 500VDC. Coil Data Mechanical Data Voltage: 5 to 24VDC. Duty Cycle: Continuous. Nominal Power: 500mW. Max. Coil Power: 130% of nominal at 20C. Termination: Printed circuit terminals with quick connect terminals. Enclosure: Vented (Flux-tight) plastic cover. Weight: 0.46 oz (13g) approximately. Dimensions are shown for 478 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCK -1 12 D 2 M ,000 1. Basic Series: PCK = 16A PC board terminals 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 06 = 06VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 4. Coil Input: D = Standard 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: M = 1 Form A (SPST-NO) 7. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .22 (5.60) .183 (4.65) .126 (3.20) .069 (1.75) .020 DIA .25 (.5) (6.35) .061 DIA (1.55) .236 (6.0) .020 (.5) .077 (1.95) 1.05 (26.7) PC Board Layout (Bottom View) .138 .020 (3.5) (.5) .039 .043 (1.0) (1.10) .039 (1.0) .039 (1.0) .057 (1.45) .020 (.5) .039 (1.0) .012 (.3) .677 (17.20) 2 - .059 DIA (1.50) .024 .295 (0.60) (7.50) .041 (1.05) 2 - .051 DIA (1.30) .024 (0.60) .677 (17.20) .043 (1.10) .102 (2.60) .295 (7.50) .041 (1.05) Reference Data Operate Time Coil Temperature Rise 14 60 12 50 10 40 8 Life Expectancy 100 Operation (x10 4 ) 70 Time (msec) Temp Rise (C) Operate Time 30 20 6 250VAC RESISTIVE, D TYPE (20 AMP) 10 250VAC RESISTIVE, H TYPE (16 AMP) 4 Release Time 2 10 0 1 0 0 0.2 Dimensions are shown for reference purposes only. 0.4 0.6 0.8 1 Coli Power (W) 1.2 1.4 0 Dimensions are in inches over (millimeters) unless otherwise specified. 0.2 0.4 0.6 0.8 1.0 Coil Power (W) 1.2 1.4 0 2 4 6 8 10 12 14 16 18 20 22 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 479 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK V23057 (Card E) series 8 Amp, Miniature Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data * 1 Form A (SPST-NO) and 1 Form C (SPDT). * 8 amp rated current. * Vertical or horizontal version. * Single or bifurcated contacts. * 4,000Vrms contact-to-coil dielectric. * Washable (sealed) plastic case. Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. Weight: 0.28 oz. (8 g) approximately. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT), single or bifurcated contact. Material: Silver-nickel 0.15, silver-nickel 20 or silver-cadmium oxide. Expected Mechanical Life: 20 million operations. Ratings: Current: 8A; 5A with silver-nickel 0.15 contacts. Voltage: 250VAC. Power (breaking): 2,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 15A. Silver-nickel 0.15 4 amp resistive, 30VDC, 2 million ops 1 amp inductive L / R = 40 ms, 24VDC, 200,000 ops. Silver-cadmium oxide 1 amp cosj = 0.4, 230VAC, 500,000 ops. Initial Dielectric Strength Contact Life Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 4/4mm. Coil Data DC @ 20C Nominal Coil Power: 450 - 500mW, dependent upon model. 6 12 24 48 60 DC Resistance in Ohms 80 330 1,200 4,700 7,200 10% 10% 15% 15% 15% Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC Nominal Coil Current (mA) 4.0 8.0 16.0 32.0 40.0 0.6 1.2 2.4 4.8 6.0 10.6 21.5 40.0 79.0 98.0 75.0 36.4 20.0 10.2 8.3 Operate Data Must Operate Voltage: See Coil Data table. Operate Time: 7 ms. Release Time: 3 ms. Bounce Time (N/O contact / N/C contact) : 0.5 ms / 3 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Coil Operating Range Applied coil voltage (U/Un) Nominal Voltage VDC Nominal coil voltage (Un) Environmental Data Temperature Range: Operating: -40C to +70C. Dimensions are shown for 480 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23057 -A 0 006 -A 1 01 1. Basic Series: V23057 = Card E miniature printed circuit board relay. 2. Mounting Orientation: A = Horizontal. B = Vertical. 3. Version: 0 = Standard 4. Coil Voltage: 001 = 6VDC 002 = 12VDC 006 = 24VDC 013 = 48VDC 023 = 60VDC 5. Contact Type: A = Single contact. B = Bifurcated contact (Not available on 1 Form A version). 6. Contact Material: 1 = Silver-nickel 0.15 2 = Silver-nickel 20 4 = Silver-cadmium oxide 7. Contact Arrangement: 01 = 1 Form C (SPDT) 02 = 1 Form A (SPST-NO) Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 1.10 MAX. (28.0) .409 (10.4) .988 (25.1) .124 (3.15) .984 MAX. (25.0) Vertical Version Vertical Version .138 (3.5) 1.10 MAX. (28.0) Horizontal Version .425 MAX. (10.8) .197 (5.0) .130 (3.3) Horizontal Version .138 (3.5) PC Board Layouts (Bottom Views) .098 - .1 GRID (2.5 - 2.54) .051 + .004 DIA. (1.3 + .1) Vertical Version .222 (5.65) .098 - .1 GRID (2.5 - 2.54) .051 + .004 DIA. (1.3 + .1) .197 (5.0) Horizontal Version .130 (3.3) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 481 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RP II/2 series 8 Amp, 2 Pole PC Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * * * * Temperature Range: Operating: -40C to +70C. Vibration (30-150 Hz.): N/O: 11g; N/C: 1.5g. Shock (destructive): 100g. 2 Form A (DPST-NO) or 2 Form C (DPDT). 8 amp rating with terminals on 5 mm pin spacing. 4kV/8mm contact-to-coil. Sockets available. Contact Data Mechanical Data Arrangements: 2 Form A (DPST-NO) and 2 Form C (DPDT), single contact. Material: Silver-cadmium oxide or silver-nickel 0.15. Expected Mechanical Life: 20 million operations. Ratings: Current: 8A (UL: 10A) Voltage: 250VAC Power (breaking): 2,000VA Voltage (breaking): 440VAC Make Current (max. 4s at 10% duty cycle): 14A Load/Life Type Load Life (Ops.) RP440 64A ON, 2A OFF, 250VAC 10,000 RP421 2A, 50VDC, resistive 2 million RP421 1/10 HP, 240VAC, per contact UL 508 RP421 3A, 380VAC, AC11 30,000 RP421 0.18A, 110VDC, DC11 100,000 RP420 0.6A, 220VAC, cos = 0.8, single phase motor 1.3 million Termination: Printed circuit terminals. Enclosure: Flux-tight (RT II) plastic case or sealed (RT III) cover. Weight: .63 oz. (18 g) approximately. Contact Life Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000Vrms Between Coil and Contacts: 4,000Vrms. Between Contact Sets: 2,500Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Nominal Coil Power: 500mW. 5 6 12 24 48 60 110 DC Resistance in Ohms 54 68 270 1,100 4,400 6,540 23,100 10% 10% 10% 15% 15% 15% 15% Must Nominal Operate Drop-out Maximum Coil Voltage Voltage Voltage Current VDC VDC VDC (mA) 3.5 4.2 8.4 16.8 33.6 42.0 77.0 0.5 0.6 1.2 2.4 4.8 6.0 11.0 9.0 10.8 21.6 43.2 86.4 108.0 198.0 92.6 88.2 44.4 21.8 10.9 9.2 4.8 Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 9 ms. Release Time (typical): 3 ms. Bounce Time (typical): N/O: 2 ms; N/C: 3 ms. Switching Rate: 6.000 ops./hr. max. at rated load. Dimensions are shown for 482 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Coil Operating Range Applied coil voltage (U/Un) Nominal Voltage VDC Nominal coil voltage (Un) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number 1. Basic Series: RP = Printed circuit board relay. 2. Version: 4 = 8A, flux-tight. 8 = 8A, sealed. 3. Contact Arrangement: 2 = 2 Form C (DPDT). 4 = 2 Form A (DPST-NO). 4. Contact Material and Pin Spacing: 0 = Silver-cadmium oxide, 5 mm pin spacing. 1 = Silver-nickel 0.15, 5 mm pin spacing. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC 060 = 60VDC B RP 4 1 0 012 110 = 110VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions 1.14 (29.0) Wiring Diagrams (Bottom Views) .496 (12.6) 2 Form C 1.00 (25.5) .130 (3.3) 2 Form A PC Board Layout (Bottom View) .051 + .004 DIA. (1.3 + .1) .094 (2.4) .197 (5.0) Dimensions are shown for reference purposes only. .098 - .1 GRID (2.5 - 2.54) .197 (5.0) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 483 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RP II/1 series 8-16 Amp, 1 Pole PC Board Relay File E214025 12A Version Only Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * * * * * Temperature Range: Operating: -40C to +70C. Vibration (30-300 Hz.): N/O: >10g; N/C: 2g. Shock (destructive): 100g. 1 Form A (SPST-NO) or 1 Form C (SPDT). 8 and 12 amp models available with 3.5 or 5mm pin spacing. 16 amp models available with 5mm pin spacing. 4kV/8mm contact-to-coil. Sockets available. Contact Data Mechanical Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT), single contact. Material: Silver-cadmium oxide or silver-nickel 0.15. Expected Mechanical Life: 30 million operations. Ratings: Current: 8A 12A 16A Voltage: 250VAC 250VAC 250VAC Power (breaking): 2,000VA 3,000VA 4,000VA Voltage (breaking): 400VAC 400VAC 400VAC Make Current: 16A 20A 25A Material: AgNi 0.15 AgCdO AgCdO Load/Life Type Load Life (Ops.) RP410 12A, 250VAC, cos = 1, 1200/h, 40% duty cycle 110,000 RP410 9.1A, 220VAC, cos = 1, 360/h, 15% duty cycle 200,000 RP418 3.4A ON, 0.42A OFF, 220VAC, cos = 0.6 > 1.1 million RP411 8A, 250VAC, cos = 1, 50% duty cycle 100,000 RP412 8A, 250VAC, cos = 1, 50% duty cycle 100,000 RP330 18.2A, 250VAC, cos = 1, 600/h, 15% duty cycle 110,000 RP330 96A ON, 16A OFF, 250VAC, cos = 0.6, 450/h >30,000 Termination: Printed circuit terminals. Enclosure: Flux-tight (RT II) plastic case or sealed (RT III) cover. Weight: .63 oz. (18 g) approximately. Contact Life Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000Vrms Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Nominal Coil Power: 500mW. 5 6 12 24 48 60 110 DC Resistance in Ohms 54 68 270 1,100 4,400 6,540 23,100 10% 10% 10% 15% 15% 15% 15% Must Nominal Operate Drop-out Maximum Coil Voltage Voltage Voltage Current VDC VDC VDC (mA) 3.5 4.2 8.4 16.8 33.6 42.0 77.0 0.5 0.6 1.2 2.4 4.8 6.0 11.0 9.0 10.8 21.6 43.2 86.4 108.0 198.0 92.6 88.2 44.4 21.8 10.9 9.2 4.8 Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 8 ms. Release Time (typical): 2 ms. Bounce Time (typical): N/O: 2 ms; N/C: 4 ms. Switching Rate: 6.000 ops./hr. max. at rated load. Dimensions are shown for 484 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Coil Operating Range Applied coil voltage (U/Un) Nominal Voltage VDC Nominal coil voltage (Un) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RP 4 1 0 012 1. Basic Series: RP = Printed circuit board relay. 2. Version: 3 = 16A, flux tight. 4 = 8/12A, flux-tight. 7 = 16A, sealed. 8 = 8/12A, sealed. 3. Contact Arrangement: 1 = 1 Form C (SPDT). 3 = 1 Form A (SPST-NO). 4. Contact Material and Pin Spacing: 0 = Silver-cadmium oxide, 16A or 12A, 5 mm pin spacing. 2 = Silver-nickel 0.15, 8A, 3.5 mm pin spacing. 1 = Silver-nickel 0.15, 8A, 5 mm pin spacing. 8 = Silver-cadmium oxide, 12A, 3.5 mm pin spacing. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 110 = 110VDC 006 = 6VDC 024 = 24VDC 060 = 60VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions 1.14 (29.0) Wiring Diagrams (Bottom Views) .496 (12.6) 1 Form C, 8/12A, 3.5 mm 1.00 (25.5) .130 (3.3) 1 Form A, 8/12A, 3.5 mm PC Board Layouts (Bottom Views) .051 + .004 DIA. (1.3 + .1) .098 - .1 GRID (2.5 - 2.54) 8/12A, 3.5 mm Pin Spacing .094 (2.4) .138 (3.5) .051 + .004 DIA. (1.3 + .1) .138 (3.5) 1 Form C, 8/12A, 5 mm .098 - .1 GRID (2.5 - 2.54) 8/12A, 5 mm Pin Spacing .094 (2.4) .138 (3.5) .051 + .004 DIA. (1.3 + .1) .138 (3.5) 1 Form A, 8/12A, 5 mm .098 - .1 GRID (2.5 - 2.54) 16A, 5 mm Pin Spacing .094 (2.4) .197 (5.0) .197 (5.0) 1 Form C, 16A, 5 mm 1 Form A, 16A, 5 mm Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 485 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RP 3 SL series 16 Amp, 1 Pole PC Board Relay for High Inrush Loads File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * * * * Temperature Range: Operating: -40C to +70C. Vibration (30-300 Hz.): 20g. Shock (destructive): 100g. 1 Form A (SPST-NO). 16 amp models handles up to 120A peak inrush current. 4kV/8mm contact-to-coil. Latching and non-latching types. Contact Data Arrangements: 1 Form A (SPST-NO), single contact. Material: Silver-tim oxide. Expected Mechanical Life: 30 million operations. Ratings: Current: 16A Voltage: 250VAC Power (breaking): 4,000VA Voltage (breaking): 440VAC Make Current (max 4s at 10% duty cycle): 25A Peak Inrush Current: 120A Load/Life 12A, 250VAC, cos = 1; 300,000 ops. TV8; 25,000 ops. 2,500W, 230VAC, Halogen lamps; > 10,000 ops. 1,000W, 250VAC, Incandescent lamps; 230,000 ops. 3,000W, 250VAC, Incandescent lamps; 36,000 ops. 1,500VA, Fluorescent lamps, 163F; 10,000 ops. Mechanical Data Termination: Printed circuit terminals. Enclosure: Flux-tight (RT II) plastic case or sealed (RT III) cover. Weight: .63 oz. (18 g) approximately. Contact Life Initial Dielectric Strength Between Open Contacts: 2,000Vrms Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Max. DC Load Breaking Capacity Nominal Coil Power: Non-latching: 500mW. Single-coil latching: 1.2 - 1.4W. Dual-coil latching: 1.2 - 1.5W. Non-Latching Models 12 270 10% 24 1,100 15% 48 4,400 15% 60 6,540 15% DC Nominal Resistance Voltage in VDC Ohms Must Nominal Operate Drop-out Maximum Coil Voltage Voltage Voltage Current VDC VDC VDC (mA) 9.0 18.0 36.0 45.0 Must Operate Voltage VDC 1.2 2.4 4.8 6.0 21.6 43.2 86.4 108.0 Reset Voltage VDC Reset R1 Ohms / W 44.4 21.8 10.9 9.2 Nominal Coil Current (mA) Single-coil Latching Models - Reset Voltage 70-110% of Nom. 5 21 10% 3.7 3.6 39 / 0.5 238.1 12 115 10% 9.0 8.7 220 / 0.5 104.3 24 460 10% 18.0 16.7 820 / 0.5 52.2 Dual-coil Latching Models - Reset Voltage 75-120% of Nom. 12 105 15% 9.0 9.0 - 114.3 24 460 15% 18.0 18.0 - 52.2 Operate Data Must Operate Voltage: See Coil Data table. Operate / Release Time (Non-latching, typical): 8 ms / 2 ms. Operate / Reset Time (Latching, typical): 6 ms / 2 ms. Bounce Time (typical): 2 ms. Switching Rate: 6.000 ops./hr. max. at rated load. Dimensions are shown for 486 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Coil Operating Range Non-latching Nominal coil voltage (Un) Applied coil voltage (U/Un) DC Resistance in Ohms Applied coil voltage (U/Un) Nominal Voltage VDC Latching version Nom. coil V (Un) Non-Latching Models Specifications and availability subject to change. Latching Models www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number 1. Basic Series: RP = Printed circuit board relay. 2. Version: 3 = Flux tight. 7 = Sealed. 3. Contact Arrangement / Material: SL = 1 Form A (SPST-NO), Silver-tin oxide. 4. Coil Voltage: Non-Latching Models: 012 = 12VDC Single-Coil Latching Models: A05 = 5VDC Dual-Coil Latching Models: F12 = 12VDC 024 = 24VDC A12 = 12VDC F24 = 24VDC 048 = 48VDC A24 = 24VDC B RP 3 SL F12 060 = 60VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. TBD Outline Dimensions 1.14 (29.0) Wiring Diagram (Bottom View) .496 (12.6) Latching Versions: Contact position shown results during or after Coil energization with reset voltage. 1.00 (25.5) Two-Coil Versions: Operate: A2, A3 Reset A1, A3 Terminal b) only present on two-coil latching models .130 (3.3) PC Board Layout (Bottom View) .051 + .004 DIA. (1.3 + .1) Circuit Diagram for Single-Coil Latching Model .098 - .1 GRID (2.5 - 2.54) (b) .094 (2.4) Dimensions are shown for reference purposes only. .197 (5.0) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 487 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0409 series High Inrush (500A/10s) Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Latching Coil Data DC @ 20C * 1 Form A (SPST-NO). * Tungsten prerun contact and silver-cadmium oxide contact. * 10 amp rated current, 500A/10s inrush current. * 4kV/8mm contact-to-coil, insulation to VDE 0631 and 0700. * Non-latching and latching types. * Well suited for lighting systems, motors, lamp loads. Nominal Coil Power: Latching: 0.8 - 1W. Minimum Energization Time: 20 ms. Nominal Voltage VDC 12 24 Contact Data Arrangements: 1 Form A (SPST-NO), single contact. Material: Tungsten prerun contact and silver-cadmium oxide contact. Expected Mechanical Life: 30 million operations. Ratings: Current: 10A. Current (making, max. 4s at 10% duty cycle): 16A. Current (peak inrush 10s): 500A. Voltage: 250VAC. Voltage (breaking): 400VAC. Load/Life 10 amp resistive, 250VAC; 250,000 ops. 2,500W, incandescent lamps; 30,000 ops. 1,300W, fluorescent lamps (140F); 30,000 ops. 1,000W, Dulux lamps (140F); 30,000 ops. DC Resistance in Ohms 10% 118 457 Must Operate Voltage VDC 8.9 18.0 Min. Reset Voltage VDC 0.7 1.3 Max. Reset Voltage VDC 2.5 5.0 Operate Data Must Operate Voltage: See Coil Data table. Operate Time /Release Time (typical): 10 ms / 3ms. Bounce Time (typical): 3 ms. Switching Rate: 9,000 ops./hr. max. at rated load. Environmental Data Temperature Range: Operating: -20C to +70C. Vibration (30-300 Hz.): 20g. Shock (destructive): 100g. Initial Dielectric Strength Mechanical Data Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Flux-tight (RTII) plastic case. Weight: 0.35 oz. (10 g) approximately. Coil Operating Range Applied coil voltage (U/Un) Non-Latching Coil Data DC @ 20C Nominal Coil Power: Non-latching: 820mW. Nominal Voltage VDC 6 12 24 48 60 DC Resistance in Ohms 10% 80 300 1,200 4,825 7,500 Must Operate Voltage VDC 4.2 8.4 16.8 33.6 42.0 Nominal Coil Current (mA) 40.0 20.0 Drop-out Voltage VDC 0.4 0.9 1.8 3.6 4.5 Maximum Voltage VDC 12.0 24.0 48.0 96.0 120.0 Nominal Coil Current (mA) 75.0 40.0 20.0 10.0 8.0 Nominal coil voltage (Un) Ordering Information Typical Part Number B 0409 1. Basic Series: 0409 = Miniature printed circuit board relay for high inrush currents. 2. Type: 47 = Non-latching 67 = Latching 3. Coil Voltage: Non latching Coil: 031 = 12VDC 027 = 24VDC 024 = 48VDC Latching Coil: 032 = 12VDC 029 = 24VDC 4. Contact Configuration: 001 = 1 Form A (SPST-NO) 47 031 001 023 = 60VDC Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. PC Board Layout (Bottom View) Outline Dimensions 1.12 (28.5) .138 (3.5) .48 (12.2) .051 - .004 DIA. (1.3 - .1) Wiring Diagram (Bottom View) .098 GRID (2.5) .996 (25.3) .090 (2.3) .157 + .02 (4 + .5) Dimensions are shown for 488 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK V23077 (IF) series 16 Amp, Miniature Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data * 1 Form A (SPST-NO) and 1 Form B (SPST-NC). * 16 amp rated current. * Quick connect terminals for load. * Ambient temperature up tp 125C. * 4kV/8mm contact-to-coil, insulation to VDE 0631 and 0700. * Flux-tight plastic case. Termination: Printed circuit terminals, plus quick connects for load. Enclosure (94 V-0 rated): Flux-tight (RTII) plastic case. Weight: 0.92 oz. (26 g) approximately. Contact Life Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form B (SPST-NC), single contact. Material: Silver-cadmium oxide. Expected Mechanical Life: 30 million operations. Ratings: Current: 16A. Voltage: 250VAC. Power (breaking): 4,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 25A. 1 Form A Contacts 10 amp resistive, 400VAC, 125C, 200,000 ops. 16 amp resistive, 250VAC, 125C, 100,000 ops. 1 Form B Contacts 10 amp resistive, 400VAC, 125C, 50,000 ops. 16 amp resistive, 250VAC, 125C, 50,000 ops. Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Nominal Coil Power: 360mW. DC Resistance in Ohms 10% Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC Nominal Coil Current (mA) 6 12 24 48 100 400 1,600 6,400 3.8 7.5 14.9 30.0 0.6 1.2 2.4 4.8 16.9 33.8 67.7 135.3 60.0 30.0 15.0 7.5 Operate Data Must Operate Voltage: See Coil Data table. Operate Time: 10 ms. Release Time: 2 ms. Bounce Time (N/O contact / N/C contact) : 1 ms / 2 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Environmental Data Coil Operating Range Applied coil voltage (U/Un) Nominal Voltage VDC Nominal coil voltage (Un) Temperature Range: Operating: -40C to +125C. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 489 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23077 -A 1 005 -A 4 03 1. Basic Series: V23077 = IF 125C miniature printed circuit board relay.. 2. Termination: A = PC terminals for coil, .25" (6.35mm) quick connects for load. 3. Version: 1 = Standard. 4. Coil Voltage: 003 = 6VDC 005 = 12VDC 007 = 24VDC 009 = 48VDC 5. Contact Type: A = Single contact. 6. Contact Material: 4 = Silver-cadmium oxide. 7. Contact Arrangement: 02 = 1 Form A (SPST-NO). 03 = 1 Form B (SPST-NC). Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions .520 (13.2) Wiring Diagrams (Bottom Views) 1.14 (29) .248 x .031 (6.3 x .8) .248 (6.3) 1.14 (29) 1 Form A .59 (15) .098 (2.5) 1.594 (40.5) 1 Form C .167 .001 (4.25 .25) PC Board Layout (Bottom View) .051 + .004 DIA. (1.3 + .1) .098 GRID (2.5) .098 (2.5) Dimensions are shown for 490 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0410 series 16 Amp, Miniature Printed Circuit Board Relay File E214025 NOTE: 0410 83 version is VDE only, not UL, CSA or SEMCO. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * * * * * * * Temperature Range: Operating: 410 63: -20C to +125C; 410 83: -20C to +85C. Vibration: (10 to 500 Hz.) 10g [410 83]. Shock (functional): 100g [410 83]. 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form X (SPST-NO-DM). 16 amp rated current. Quick connect terminals for load. 410 63 types operate in ambient temperature up to 125C. 4kV/8mm contact-to-coil, insulation to VDE 0631 and 0700. 410 83 version provides 3 mm contact gap. Flux-tight plastic case. Mechanical Data Contact Data Arrangements: 410 63: 1 Form A (SPST-NO) and 1 Form B (SPST-NC), single contact. 410 83: 1 Form X (SPST-NO-DM). Material: 410 63: Silver-cadmium oxide.; 410 83: Silver-nickel. Expected Mechanical Life: 10 million operations. Ratings: Current: 16A. Voltage: 250VAC. Power (breaking): 4,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 410 63: 25A.; 410 83: 20A. 410 63 - 1 Form A Contacts 16 amp resistive, 250VAC, 125C, 100,000 ops. 12 amp resistive, 250VAC, 70C, 450,000 ops. 10 amp resistive, 400VAC, 125C, 50,000 ops. 12 amp cos = 0.6, 250VAC, 125C, 50,000 ops. 410 63 - 1 Form B Contacts 16 amp resistive, 250VAC, 125C, 150,000 ops. 410 83 - 1 Form X Contacts 16 amp resistive, 250VAC, 85C, 30,000 ops. 10 amp resistive, 250VAC, 85C, 100,000 ops. 10 amp resistive, 400VAC, 85C, 10,000 ops. Termination: Printed circuit terminals, plus quick connects for load. Enclosure (94 V-0 rated): Flux-tight (RTII) plastic case. Weight: 0.85 oz. (24 g) approximately. Contact Life 410 63 Type 1 Form A or 1 Form C 410 83 Type 1 Form X, 3 mm Contact Gap Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 410 63: 1,000Vrms.; 410 83: 2,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Nominal Coil Power: 360mW. Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC 410 63 models (1 Form A or 1 Form B) 6 100 3.8 0.6 16.9 12 400 7.5 1.2 33.8 24 1,600 14.9 2.4 67.7 48 6,400 30.0 4.8 135.3 410 83 models (1 Form X with 3 mm contact gap) 6 100 3.6 0.45 16.9 12 400 7.3 0.9 33.8 24 1,600 14.6 1.8 67.7 48 6,400 29.2 3.6 135.3 60 10,000 36.5 4.5 135.3 Nominal Coil Current (mA) 60.0 30.0 15.0 7.5 60.0 30.0 15.0 7.5 6.0 Coil Operating Range Nominal coil voltage (Un) Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 410 63: 10ms.; 410 83: 14 ms. Release Time (typical): 5 ms. Bounce Time (typical): 3 ms. Switching Rate: 6,000 ops./hr. max. at rated load. Dimensions are shown for reference purposes only. 410 63 Type 1 Form A or 1 Form C Applied coil voltage (U/Un) DC Resistance in Ohms 10% Applied coil voltage (U/Un) Nominal Voltage VDC Dimensions are in inches over (millimeters) unless otherwise specified. 410 63 Type 1 Form A or 1 Form C Specifications and availability subject to change. Nominal coil voltage (Un) 410 83 Type 1 Form X, 3 mm Contact Gap www.tycoelectronics.com Technical support: 491 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B 0410 1. Basic Series: 0410 = Miniature printed circuit board relay with quick connect terminals for load. 2. Version: 63 = Model for ambient temperature up to 125C. 83 = Model with 3 mm contact gap, for ambient temperature up to 85C 3. Coil Voltage: 054 = 6VDC 050 = 12VDC 046 = 24VDC 043 = 48VDC (Note: 60VDC coil is not available with version 63) 4. Contact Arrangement: 01 = 1 Form A (SPST-NO) on version 63; 1 Form X (SPST-NO-DM) on version 83. 02 = 1 Form B (SPST-NC), not available on version 83. 83 046 001 042 = 60VDC Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 1.24 MAX 1.14 (31.5) (29) .492 MAX (12.5) .248 x .031 (6.3 x .8) .248 (6.3) .697 (17.7) 1.12 MAX (28.5) 410 63, 1 Form A .59 (15) .295 .008 (7.5 .2) .098 (2.5) 1.594 MAX (40.5) 410 63, 1 Form B .157 .02 (4 .5) 410 83, 1 Form X PC Board Layout (Bottom View) .051 + .004 DIA. (1.3 + .1) .098 GRID (2.5) .098 (2.5) Dimensions are shown for 492 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCG series 2 Pole Miniature Power PC Board Relay Appliances, Audio Equipment, Office Machines UL File No. E82292 CSA File No. LR48471 SEMKO File No. 8744066 SEV File No. 98110096 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Meet UL Tungsten TV-5 rating. * 2 Form A contact arrangements. * Meet UL, CSA, SEMKO and SEV requirements. * Meet 4,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts (1.2 / 50s). Contact Data @ 20C Arrangements: 2 Form A (DPST-NO). Material: AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. PCG Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 11.0 47 68 155 270 1,100 4,400 4.00 4.80 7.20 9.60 19.20 38.40 0.25 0.30 0.45 0.60 1.20 2.40 Operate Data Must Operate Voltage: 80% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time:15 ms max. Release Time: 5 ms max. Contact Ratings Ratings: 5A @ 250VAC resistive, 100,000ops. 8A @ 250VDC resistive, 50,000ops. TV-5 @ 120VAC Tungsten, 25,000ops. Max. Switched Voltage: AC: 277V. DC: 30V. Max. Switched Current: 10A. Max. Switched Power: 1,250VA, 380W. Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Surge Voltage Between Contact and other Pole: 6,000V (1.2 / 50s). Environmental Data Temperature Range: Operating: -30C to +70C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): PCG-N: Vented (Flux-tight) snap-on cover. Weight: 0.63 oz (18g) approximately. Coil Data Voltage: 5 to 48VDC. Nominal Power: 540 mW Coil Temperature Rise: 50C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 493 Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information B Typical Part Number OEG PCG -2 24 D 2 M N ,000 1. Basic Series: PCG = Miniature Power PC board relay. 2. Termination: 2 = 2 pole. 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 4. Coil Input: D = Standard 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: M = 2 Form A, DPST-NO. 7. Contact Rating: N = Vented (Flux-tight)* snap-on cover. 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .98 .012 (24.9 .3) .012 (.3) .012 (.3) .016 (.4) .157 .012 (4.0 .3) .039 (1.0) .039 (1.0) 1.11 .012 (28.2 .3) .039 (1.0) .031 (.8) PC Board Layout (Bottom View) 2 - .039 DIA (1.0) .559 .012 (14.2 .3) .315 .012 (8.0 .3) .295 .012 (7.5 .3) .315 .004 (8.0 .1) .295 .004 (7.5 .1) .687 .004 (17.45 .1) .303 .012 (7.7 .3) .065 (1.65) .687 .012 (17.45 .3) 4 - .051 DIA (1.3) .303 .004 (7.7 .1) Reference Data Coil Temperature Rise Operate Time 60 12 50 10 Life Expectancy 100 250VAC Resistive 8A 30 20 Operation (x 104) 40 Time (msec) Temp. Rise (C) Operate Time 8 6 4 2 10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Release Time 0.2 Coil Power (W) Dimensions are shown for 494 reference purposes only. 10 0.4 0.6 0.8 1.0 1.2 1.4 1 0 Coil Power (W) Dimensions are in inches over (millimeters) unless otherwise specified. 1 2 3 4 5 6 7 8 9 10 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0430 series 10-16 Amp, 1 or 2 Pole PC Board or Panel Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * * * * * * * Must Operate Voltage: See Coil Data table. Operate Time (typical): Standard Contact Gap: 18 ms. 3mm Contact Gap: 15 ms. Release Time (typical): Standard Contact Gap: 3 ms. 3mm Contact Gap: 8 ms. Bounce Time (typical): Standard Contact Gap: 3 ms. 3mm Contact Gap: 4 ms. Switching Rate: 9,000 ops./hr. max. at rated load. 1 Form A (SPST-NO) through 2 Form C (DPDT). 16 amp rated current (1 pole) or 10 amp (2 pole). Printed circuit or quick connect terminals. 4kV/8mm contact-to-coil. 3 mm contact gap version available. Optional magnetic blowout on 3mm contact gap version. PC board, bracket or panel mount. Contact Data Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC), 1 Form C (SPDT), 2 Form A (DPST-NO), 2 Form B (DPST-NC), 2 Form C (DPDT). Material: Silver-cadmium oxide or silver-copper 3. Expected Mechanical Life: 250,000 operations. Ratings: Current: One pole: 16A; Two pole: 10A. Voltage: 250VAC. Power (breaking): One pole: 4,000 VA; Two pole: 2,500VA. Voltage (breaking): 400VAC. Current (making, max. 4s at 10% duty cycle): One pole: 25A; Two pole: 15A. Load/Life - One Pole - Model with Standard Contact Gap 16 amp resistive, 250VAC, 250,000 ops. Load/Life - One Pole - Model with 3mm Contact Gap 16 amp resistive, 250VAC, 70C, 150,000 ops. 10 amp resistive, 250VAC, 105C, 150,000 ops. Load/Life - Two Pole 10 amp resistive, 250VAC, 250,000 ops. Environmental Data Temperature Range: Operating: 410 63: -20C to +70C. Shock (destructive): 100g. Mechanical Data Termination: Printed circuit or quick connect terminals. Enclosure: Plastic dust cover. Weight: 1.13 oz. (32 g) approximately. Contact Life Initial Dielectric Strength Between Open Contacts: Standard Contact Gap: 1,000Vrms 3mm Contact Gap: 2,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Nominal Coil Power: DC Coil : 1W.; AC Coil: 1.8VA Nominal Voltage VDC DC Resistance in Ohms 10% Must Operate Voltage VDC Drop-out Voltage VDC DC Coils 12 145 7.8 0.6 24 580 15.6 1.2 48 2,200 31.2 2.4 110 13,000 71.5 5.5 AC Coils - Models with Standard Contact Gap 24 200 18.0 3.6 60 1,250 45.0 9.0 110 4,500 83.0 16.0 230 17,500 170.0 35.0 AC Coils - Models with 3mm Contact Gap 24 145 18.0 3.6 60 950 45.0 9.0 110 3,100 83.0 16.0 230 11,400 170.0 35.0 Dimensions are shown for reference purposes only. Maximum Voltage VDC Nominal Coil Current (mA) 15.6 31.2 62.4 143.0 83.0 41.0 22.0 9.0 27.0 69.0 127.0 253.0 75.0 30.0 16.0 10.0 27.0 69.0 127.0 253.0 75.0 30.0 16.0 9.0 Models with Std. Contact Gap Models with 3mm Contact Gap Max. DC Load Breaking Capacity Dimensions are in inches over (millimeters) unless otherwise specified. with blowout magnet Models with Std. Contact Gap Specifications and availability subject to change. Models with 3mm Contact Gap www.tycoelectronics.com Technical support: 495 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B 0430 1. Basic Series: 0430 = Miniature printed circuit board or panel mount relay. 2. Mounting: 0 = PC board 1 = Mounting brackets 2 = Snap mounting 5 = DIN rail mounting 3. Version: 4 = 1 pole, 3mm gap. 5 = 1 pole, 3mm gap, magnetic blowout. 6 = 1 pole, Std. gap. 4. Coil Voltage: DC Coils for all Types: 09 = 12VDC 10 = 24VDC 11 = 48VDC AC Coils for Std. Gap Types: 03 = 24VAC 05 = 60VAC 06 = 110VAC AC Coils for 3 mm Gap Types: 23 = 24VAC 25 = 60VAC 26 = 110VAC 5. Contact Material: 0 = Silver-copper 3 1 = Silver-cadmium oxide. 6. Contact Arrangement: 100 = 1 Form A (SPST-NO) 200 = 1 Form B (SPST-NC) 300 = 1 Form C (SPDT). 400 = 2 Form A (DPST-NO) 500 = 2 Form B (DPST-NC) 600 = 2 Form C (DPDT). Note: 1 6 10 1 100 7 = 2 pole, Std. gap. 13 = 110VDC 07 = 230VAC 27 = 230VAC 2 pole forms not available with 3mm contact gap. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions .646 (16.4) 1.40 (35.5) 1.40 (35.5) .354 (9.0) 1.10 (28) 1.10 (28) .165 (4.2) .472 (12) .984 (25) 1.48 - .004 (37.7 - .1) .130 + .004 (3.3 + .1) .126 (3.2) 1.65 (42) .984 (25) .126 (3.2) .157 (4.0) PC Board Version, Std. Gap. 1.40 (35.5) .079 + .004 (2 + .1) 1.10 (28) .138 + .004 (12.1 + .1) Mounting Bracket Versions .126 (3.2) .40 (1.0) .157 (4.0) PC Board Version, 3mm Gap Snap Mount Version Wiring Diagrams (Bottom Views) PC Board Layouts (Bottom Views) .051 + .004 DIA. (1.3 + .1) .063 (1.6) .051 + .004 DIA. (1.3 + .1) .063 (1.6) .051 + .004 DIA. (1.3 + .1) .063 (1.6) Dimensions are shown for 496 reference purposes only. .098 GRID (2.5) 1 Form A, Standard Contact Gap 1 Form A, Standard Contact Gap 1 Form A, 3mm Contact Gap 1 Form A, 3mm Contact Gap 2 Form A, Standard Contact Gap 2 Form A, Standard Contact Gap .177 (4.5) .098 GRID (2.5) .177 (4.5) .098 GRID (2.5) .177 (4.5) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 600 series 15 Amp Sensitive PC Board Relay File E39006 and E42149 File LR48569 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength * Low power sensitive coil. * 1 Form A, 1 Form B and 1 Form C contact arrangements. * Various contact materials and types for ratings to 15 amps. * Coil assembly rated 130C, 94V-O. * Applications include sensor and timer controls, emergency lighting, instrmentation, alarm systems, smoke and fire detectors, business equipment and vending machines. Between Open Contacts: 500VAC, 60 Hz., 2 seconds. Between Coil and Contacts: 1,000VAC, 60 Hz., 2 seconds. Coil Data @ 25C Contact Data Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form C (SPDT). Material and Type: Gold-silver crossbar, silver-cadmium crossbar, palladium crossbar, gold-flashed silver cadmium, silver sadmium oxide, find silver, gold-flashed coin silver. Expected Mechanical Life: 10 million operations, minimum. Expected Electrical Life: 100,000 operations, minimum, at rated load. UL/CSA Ratings @ 25C Code Contact Material B Au Flashed AgCd Coil Data @ 25C Rating 75VA@24VAC Pilot Duty 1A@120VAC General Purpose 1.5A@50VDC Resistive 600W@277VAC Gen'l. Purpose SPST-NO Only 240W@277VAC Gen'l. Purpose SPST-NC Only 480VA@277VAC Pilot Duty SPDT Only 480VA@Ballast SPDT Only 1/10 HP@120VAC G Au Ag 3A@28VDC Resistive 125VA@120VAC Pilot Duty 1/8 HP@120/240 VAC H AgCdO 15A@150VAC Inductive 0.4 PF NO Only 10A@277VAC Resistive 15A@28VDC Resistive TV5@NO Contacts TV2@NC Contacts 600W@277VAC Tungsten SPDT-NO Only 240W@277VAC Tungsten SPDT-NC Only 480VA@277VAC Pilot Duty SPDT Only 480VA@277VAC Ballast SPDT Only 1/3 HP@120/240VAC NO 1/6 HP@120/240VAC NC K Au Flashed Coin Ag 5A@240VAC Resistive 5A@28VDC 125VA@240VAC Pilot Duty 125VA@125VAC Pilot Duty R Fine Ag 15A@150VAC Resistive 15A@28VDC Resistive 10A@277VAC Resistive 480VA@240VAC Pilot Duty TV2@NC Contacts TV4@NO Contacts 480W@120VAC Tungsten NO 240W@120VAC Tungsten NC S Ag Cd 3A@240VAC Resistive 3A@28VDC Resistive V Palladium 2A@28VDC Resistive Only when Code Y Electrical Spacing is specified. Dimensions are shown for reference purposes only. Rated Voltage: 3 to 48VDC. Maximum Voltage @ 85C: 120% of Rated Voltage. Nominal Power @ 25C: 110mW for 3A and 5A rated models; 240mW for 15A rated models. Maximum Power @ 25C: 1W. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 25C, 500VDC and 50% rel. humidity. Dimensions are in inches over (millimeters) unless otherwise specified. Nominal Voltage VDC 003 006 009 012 018 024 028 048 DC Resistance in Ohms 10% 3 A & 5A Types 82 327 736 1,309 2,945 5,236 7,127 20,945 15A Types 38 150 338 600 1,350 2,400 3,267 9,600 Must Operate Voltage VDC 2.25 4.5 6.75 9.0 13.5 18.0 21.0 36.0 Must Release Voltage VDC 0.3 0.6 0.9 1.2 1.8 2.4 2.8 4.8 Operate Data @ 25C Must Operate Voltage: 75% of nominal. Must Release Voltage: 10% of nominal. Operate Time: 10 ms, typ. Release Time: 10 ms, typ. Environmental Data Temperature Range: Storage: -55C to +85C. Operating: -55C to +85C. Mechanical Data Termination: Printed circuit terminals. Enclosures: Unsealed dust cover or sealed plastic case. Weight: 1.6 oz. (45g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 497 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B 60 3 - 24 V Y Q 1. Basic Series Type: 60 = Miniature, PC board relay rated 3A or 5A (Contact Material Code G, S, V or B only) 61 = Miniature, PC board relay rated 15A (Contact Material Code H or R only) 65 = Miniature, PC board relay rated 5A (Contact Material Code K only) 2. Contact Arrangement: 1 = 1 Form A (SPST-NO) 3. Coil Voltage: 003 = 3VDC 006 = 6VDC 2 = 1 Form B (SPST-NC) 009 = 9VDC 012 = 12VDC 018 = 18VDC 024 = 24VDC 3 = 1 Form C (SPDT) 028 = 28VDC 048 = 48VDC 4. Contact Material: G = Au Ag crossbar, rated 3A (Only available with Basic Series Type 60). S = Au Cd crossbar, rated 3A (Only available with Basic Series Type 60). V = Pd crossbar, rated 3A (Only available with Basic Series Type 60). B = Au-flashed AgCd crossbar, rated 5A (Only available with Basic Series Type 60). H = AgCdO, rated 15A (Only available with Basic Series Type 61). R = Fine Ag, rated 15A (Only available with Basic Series Type 61). K = Au-flashed coin Ag, rated 5A (Only available with Basic Series Type 65). 5. Electrical Spacing: Leave Blank = 0.125 in (3.175 mm) Clearance and 0.125 in (3.175 mm) Creepage Y = 0.125 in (3.175 mm) Clearance and 0.250 in (6.35 mm) Creepage 6. Enclosure Type Leave Blank = Unsealed dust cover Q = Sealed cover Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions .775 MAX. (19.69) 1.250 MAX. (31.75) 1.200 MAX. (30.48) .240 (6.1) Wiring Diagrams (Bottom Views) PC Board Layout (Bottom View) .273 (6.93) 1 Form A (SPST-NO) .546 (13.9) 1 Form B (SPST-NC) 1 Form C (SPDT) .067 DIA. TYP. (1.70) .313 (7.95) .843 (21.4) .297 (7.54) .594 (15.1) Note: On single throw models, only necessary terminals are present. Dimensions are shown for 498 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Note: On single throw models, only necessary terminals are present. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 POWER PC BOARD RELAYS Alphanumeric Index Series Type Page 491 ................ 20A AC Coil PCB or Panel Mt. Relay ............. 509 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 PCF ................ 25A DC Coil PCB Relay ................................. 502 T9A ................ 30A DC Coil PCB or Panel Mt. Relay ............. 506 T90 ................ 30A DC Coil PCB Relay ................................. 504 T92 ................ 30A AC or DC Coil PCB or Panel Mt. Relay ... 511 NOTE: Some of the relay series described in the Power Relays and Contactors section are also available with printed Low-signal PCterminals BoardasRelays . 301-336 circuit board an option. 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ........ 501-512 5 Relays with Forcibly-Guided Contacts.............. 36-79 6 Plug-in/Panel Mount 7 Power (20-30A) PC Board General Relay Question Tree Purpose Relays............ 701-749 This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, PowerofRelays the user must assume ultimate responsibility for determining the suitability a relay for&a Definite particular application. Purpose Contactors...................... 89-131 Mounting and Termination? Latching, Impulse & Rotary Relays ............................... 149-154 PCB Only 9 Panel Mount PCB + QC Terminals 10 Automotive Relays................ 1001-1025 AC or DC Coil? AC or DC Coil? AC or DC Coil? Solid State Relays & Input/Output Modules ................ 195-207 AC DC DC AC Coil DC Coil AC Coil Number of Poles? Number of Poles? Number of Poles? 11 Coil Time Delay Relays & Counters 208-232 Number Number Number ........................................ of Poles? of Poles? One Pole Two Poles One Pole Two Poles One Pole None T92 T90 T9A T92 491 None PCF T90 T9A Poles Pole Poles Pole Poles None 491 T92 T9A T92 High Performance Relays and Contactors (overview) ....... 233-234 Specifications and availability subject to change. 12 of Poles? SensorsTwo & Monitors 233-234 One ................... Two One Two + Two Poles Dimensions are in inches over (millimeters) unless otherwise specified. Coil Coil One Pole Dimensions are shown for reference purposes only. 8 13 14 www.tycoelectronics.com Technical support: 501 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCF series 25A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 TUV File No. R9551880 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * Meet UL 508, CSA, TUV requirements. * 1 Form A contact arrangements. * Quick connect terminal type and PC board type. * Meet 5,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts (1.2 / 50s). Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 06 09 12 24 150.0 100.0 75.0 37.5 40 90 160 640 4.50 6.75 9.00 18.00 0.30 0.45 0.60 1.20 Contact Data @ 20C PCF / PCFN Arrangements: 1 Form A. Material: AgSnO Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 20 ms max. Release Time: 10 ms max. Contact Ratings Ratings: 25A @ 250VAC resistive. 23A @ 277VAC resistive. 20A @ 250VAC inductive (coso= 0.4). Max. Switched Voltage: AC: 250V. Max. Switched Current: 25A. Max. Switched Power: 6,370VA. Environmental Data Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 8,000V (1.2 / 50s). Temperature Range: Operating: -30C to +55C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Coil Data Mechanical Data Voltage: 6 to 24VDC. Nominal Power: 900 mW. Coil Temperature Rise: 55C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Termination PCF : Printed circuit terminals with quick connect terminals. PCFN : Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): PCF / PCFN: Vented (Flux-tight) plastic cover. Weight: 0.99 oz (28g) approximately. Dimensions are shown for 502 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number 1. Basic Series: PCFN = 25A PC Board Terminals B OEG PCFN -1 24 D 2 M ,000 PCF = Quick Connect Terminals 2. Enclosure: 1 = 1 pole 3. Coil Voltage: 06 = 6VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 4. Coil Input: D = Standard 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram .630 .02 (16.0 .5) PCF (Top View) 1.20 .02 (30.4 .5) .472 .008 (12.0 .2) PCFN .464 .008 (11.8 .2) .331 (8.40) .031 (.8) PCF .394 .008 (10.0 .2) (Bottom View) .25 (6.35) .069 DIA (1.75) .079 (2.0) 1.04 .02 (26.5 .5) PC Board Layout (Bottom View) .059 (1.50) .031 (.8) .157 .012 (4.0 .3) .012 (.3) .063 (1.60) 2 - .071 DIA (1.8) 1.09 .008 (27.6 .2) PCFN .244 (6.2) .472 .008 .228 (12.0 .2) (5.8) 1.04 .02 (26.5 .5) 2 - .063 DIA (1.6) .059 .031 (1.50) (.8) 1.09 .008 (27.6 .2) .472 (12.0) .394 (10.0) .012 .063 (.3) (1.60) .157 .012 (4.0 .3) .472 .008 (12.0 .2) .866 .008 (22.0 .2) Reference Data Operate Time 24 50 20 40 25A 20A 30 20 Life Expectancy 100 250VAC Resistive Operation (x 104) 60 Time (msec) Temp. Rise (C) Coil Temperature Rise 16 Operate Time 12 8 0A 4 10 10 Release Time 1 0.2 0.4 Dimensions are shown for reference purposes only. 0.6 0.8 1.0 Coil Power (W) 1.2 1.4 0.2 Dimensions are in inches over (millimeters) unless otherwise specified. 0.4 0.6 0.8 1.0 Coil Power (W) 1.2 1.4 2 Specifications and availability subject to change. 4 6 8 10 12 14 16 18 20 Contact Current (A) 22 24 26 www.tycoelectronics.com Technical support: 503 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T90 series 30 Amp Printed Circuit Board Relay File E22575 Patented File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Typical Coil Temperature Rise * Up to 30A switching in SPST and 20A switching in SPDT arrangements. * Silver cadmium oxide contacts. * Available as an open-frame relay, with a snap-on dust cover or with an immersion cleanable(6), plastic sealed case. * Meets UL 508 & UL 873 spacing - 1/8" through air, 1/8" over surface. (1/4" over surface with terminal code 4) * UL class F insulation standard. * Well suited for various industrial, commercial and residential applications, as well as many others. Data below are average values and should be verified in application. Tests were conducted within a 2' (.6 m) cube (still air) with relay mounted to a 30A, single side P.C. board (6); at nominal coil power @ 25C; with normally open contact loaded; and with 4' (1.22 m) long, #10 AWG load wires. Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Mechanical Life: 10 million operations, typical. Contact Ratings @ 25C with relay properly vented. Remove vent nib after soldering and cleaning. Typical Electrical Load & Life (Open Style Relay) Form & Contact Material Contact Load Type of Load Ops 30A @ 240VAC 20A @ 240VAC UL General Purpose Resistive Heater 100,000 100,000 20A/10A @ 240VAC UL General Purpose 20A/10A @ 28VDC Resistive 100,000 100,000 (1) Silver-cadmium oxide (5) Silver-cadmium oxide Minimum Contact Load: Silver Contacts: 500mA @ 5VDC or 12VAC. Silver Cadmium Oxide Contacts: 1A @ 5VDC or 12VAC. Initial Contact Resistance: 75 m, max., @ min. rated current (switched). Initial Dielectric Strength Between Open Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms ( terminal code 1). 2,500V rms (UL 873 version terminal code 4). Between Mutually Insulated Elements: 109 ohms, min., @ 500VDC, 25C and 50% R.H. Coil Data @ 25C Voltage: 5 to 110VDC. Maximum Coil Power: 2.8 Watt Maximum Coil Temperature(5): Class F: 155C. Duty Cycle: Continuous. 110 100 90 80 70 60 30A Load 50 25A Load 40 20A Load 15A Load 10A Load 0A Load 30 20 75 100 125 150 175 200 225 Applied Continuous Coil Voltage (% of Rated Voltage) 150 Sealed Relay, Vented (3) 140 130 120 110 100 90 80 70 30A Load 60 25A Load 50 20A Load 15A Load 10A Load 0A Load 40 30 20 50 75 100 125 150 175 200 225 Applied Continuous Coil Voltage (% of Rated Voltage) Storage Temperature Range: -40C to 130C. Operating Temperature Range: -55C to +85C(1). Vibration, Operational: 0.065" (1.65mm) max. excursions from 10-55 Hz. with no contact opening >100s. Shock, Operational: 10g for 11 ms with no contact opening >100s. Shock, Mechanical: 100g. Mechanical Data Coil Data Nominal Voltage (VDC) 10% (Ohms) Resistance Nominal Power (mW) Nominal Current (mA) 5 6 9 12 15 18 24 48 110 27 40 97 155 256 380 660 2,560 13,450 930 900 840 930 880 850 870 900 900 185 150 93 77 59 47 36 19 8 Operate Data @ 25C Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time (Including Bounce): 15 ms, max. Release Time (Including Bounce): 15 ms, max. At or From Nominal Coil Voltage Dimensions are shown for Open Style Relay, No Dust Cover 120 Environmental Data Initial Insulation Resistance 504 reference purposes only. 130 50 Coil Temp. Rise Above Ambient (C) Contact Ratings @ 25C Coil Temp. Rise Above Ambient (C) Features Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals(4). Enclosures (all have 94V-0 flammability rating, Class F temp. rating): Optional dust cover: Snap-on plastic dust cover is available for use on open style T90N. Sealed case (T90S): Immersion cleanable, sealed plastic case(2). Weight: Open Model T90N: 0.7 oz. (20g) approximately. Sealed Model T90S: 0.9 oz. (26g) approximately. Notes (1) Operating ambient temperature must consider "Must Operate Voltage Change Over Temperature," Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to cool) and Maximum Coil Temperature. Specification ambient considers nominal coil voltage, 20A load with coil cooled to ambient. (2) Sealed relay terminals should not be bent. (3) Knock-off nib should be removed after cleaning process for optimum life of sealed relays. (4) Maximum soldering temperature is 500F for 4 seconds. (5) Class F coils are UL systems approved for maximum coil temperature of 155C by change of resistance method. (6) See application note 13C265 for proper relay mounting, termination, cleaning and PC board conductor width. Coil rise test performed with 30A PC board to maintain 20C maximum rise @ 30A. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number 1. 2. 3. 4. 5. B T90 S 5 D 1 2 -24 Basic Series: T90 = Printed circuit board power relay. Enclosure: N = Open, no cover (snap-on dust cover available as an option). S = Immersion cleanable, sealed plastic case with knock-off nib for ventilation. Contact Arrangement: 1 = 1 Form A (SPST-NO). 5 = 1 Form C (SPDT). Coil Input: D = DC Voltage. Terminals: 1 = Printed circuit terminals. 4 = Printed circuit terminals, no common terminal between coil terminals (see wiring diagram). Note: Terminal code 4 recommended for UL 873 applications. Consult factory for use of terminal code 1 for UL 873 applications. 6. 7. Contact Material: 2 = Silver-cadmium oxide. Coil Voltage: 5 = 5V DC 6 = 6V DC 9 = 9V DC 12 = 12V DC 15 = 15V DC 18 = 18V DC 24 = 24V DC 48 = 48V DC 110 = 110V DC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T90N1D12-12 T90N1D12-18 T90N1D12-24 T90N1D42-24 T90N5D12-12 T90N5D12-24 T90N5D42-24 T90S1D12-12 T90S1D12-24 T90S1D42-24 T90S5D12-12 T90S5D12-24 T90S5D42-24 Optional Dust Cover For Use With Open-Style Relays Outline Dimensions T90N .950 MAX. (24.13) Optional plastic dust cover is a snap-on unit, open on the PC board side of the relay. The cover, when ordered with the relay, is shipped separately. It is designed to be snapped into place by the customer after the relay has been assembled to the PC board. .031 x .062 (.79 x 1.58) TERMINALS .680 MAX. (17.27) .130 .020 (3.3 .51) 1.20 MAX. (30.5) Cover Ordering Information - Boldface items are stocked. .025 x .025 (.64 x .64) TERMINALS T90S .805 MAX. (20.4) .130 + .016 - .010 3.30 + .41 -.25 ( Description Black dust cover for use on open-style, T90N relay. 1.067 MAX. (27.1) .719 (18.26) .212 MAX. (5.38) .032 x .062 (.8 x 1.6) TERMINALS ) .50 (12.7) .69 (17.5) 1.256 MAX. (31.9) .10 MAX. (2.54) .50 (12.8) .69 (17.6) .045 x .045 (1.14 x 1.14) TERMINALS Part No. 35C620A .090 (2.29) 1.27 MAX. (32.26) .025 x .025 2x (.64 x .64) TERMINALS .016 (.43) 1.08 MAX. (27.43) .87 (22.1) .045 x .045 2x (1.14 x 1.14) TERMINALS Wiring Diagram & PC Board Layout (Bottom Views) UL & CSA Contact Ratings 1 Form C (Unused terminals are not present) .081 .005 DIA. (2.06 .13) .300 (7.62) .100 (2.54) .600 (15.24) Voltage .078 .003 DIA. (1.98 .08) N. C. Contact General Purpose Resistive Resistive 10A 10A 10A 5A 5A 5A 30A 20A 1 HP 2 HP 80/30 TV5 6A 20A 15A 15A 1/4 HP 1/2 HP 30/10 TV3 3A 10A Silver-Cadmium Oxide Contacts .600 (15.24) .150 (3.81) N.O. Contact Silver Contacts 240VAC 240VAC 28VDC .043 .003 DIA. (1.09 .08) Note: This terminal not present with terminal code 4. Load Type .350 (8.89) .550 (13.97) .700 17.78 240VAC 240VAC 120VAC 240VAC 240VAC 240VAC 277VAC 28VDC General Purpose UL Resistive Motor Motor LRA/FLA Tungsten Ballast Resistive For Form C application, derate current to 67%. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 505 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T9A series DC Coil 30 Amp PC Board or Panel Mount Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength * Up to 30 amp switching in SPST and 20 amp in SPDT arrangements. * Immersion cleanable(6), plastic sealed case available. * Meets UL 873 and UL 508 spacing - 1/8" through air, 1/4" over surface. * Load connections made via 1/4" Q. C. terminals and safety wells accept insulated female Q. C. terminals (mounting codes 2 & 5). * UL Class F insulation system standard. * Well suited for various industrial, commercial and residential applications. Between Open Contacts: 1,500V rms. Between Contacts and Coil: 2,500V rms. 6 kV surge using 1.2s/50s Impulse Wave or .5s - 100kHz Ring Wave Contact Ratings @ 25C Arrangements: 1 Form A (SPST-NO), and 1 Form C (SPDT). Material: Silver-cadmium oxide. Mechanical Life: 10 million operations, typical. Minimum Contact Load: 1A @ 5VDC or 12VAC. Initial Contact Resistance: 75 milliohms, max., @ min. rated current (switched). Initial Insulation Resistance Between Mutually Insulated Elements: 109 ohms, min., @ 500VDC, 25C and 50% R.H. Contact Ratings @ 25C (unless otherwise noted) with relay properly vented. Remove vent nib after soldering and cleaning. Coil Data @ 25C Typical Electrical Load & Life - 1 Watt Coil Contact Arrangement Contact Load Type of Load Operations 1 30A @ 240VAC 25A @ 240VAC UL General Purpose Resistive Heater 100,000 100,000 5 20A/10A @ 240VAC 20A/10A @ 240VAC 20A/10A @ 28VDC UL General Purpose UL Resistive Resistive 100,000 100,000 100,000 Coil Data - 1 Watt UL 508/873 & CSA Contact Ratings - 900mW Coil Voltage Load Type 240VAC General Purpose 240VAC Resistive 240VAC Resistive 240VAC LRA/FLA 120VAC LRA/FLA 120VAC LRA/FLA Voltage: 5 to 110VDC. Nominal Coil Power: 1.0W, (approx.) and 900mW (approx.) versions. Maximum Coil Power: 2.8 Watt. Maximum Coil Temperature(5): Class F: 155C. Duty Cycle: Continuous. N.O. Contact N.C. Contact Operations 30A 18A - 30A/15A 50A/16A 30A/11A - - 15A - - - 100,000 100,000 @ 105C 6,000 100,000 100,000 200,000 Nominal Voltage 5 9 12 18 24 48 110 DC Resistance 10% (Ohms) 25 81 144 324 576 2,304 12,100 Nominal Current (mA) 200 111 83 56 42 21 9 DC Resistance 10% (Ohms) 27 97 155 380 660 2,560 13,450 Nominal Current (mA) 185 93 77 47 36 19 8 Note: Consult factory for other 900mW version contact ratings. UL 508/873 & CSA Contact Ratings - 1 Watt Coil Coil Data - 900mW Voltage Load Type N.O. Contact N.C. Contact 277VAC 277VAC 240VAC 240VAC 240VAC 240VAC 240VAC 125VAC 120VAC 120VAC 120VAC 28VDC Tungsten * Ballast Motor Resistive * General Purpose LRA/FLA ** Pilot Duty * Motor LRA/FLA Tungsten * Pilot Duty Resistive 5.4A 10A 2 HP 25A 30A 80A/30A 470VA 1 HP 98A/22A 8.3A 470VA 20A - 3A 1/2 HP 20A 15A 30A/12A 275VA 1/4 HP - - - 10A * Rated 6,000 operations. ** Higher UL & CSA ratings available. For Form C application, derate current to 20A (N.O.), 10A (N.C.). For Form C application, derate current to 67%. Nominal Voltage 5 9 12 18 24 48 110 Operate Data @ 25C Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time (Including Bounce): 15 ms, max. Release Time (Including Bounce): 15 ms, max. At or From Nominal Coil Voltage Note: Consult factory for other 900mW version contact ratings. Dimensions are shown for 506 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ambient Temperature vs. Coil Voltage - 1 Watt Coil Environmental Data Data below are average values and should be verified in application. Tests were conducted within a 2' (.6 m) cube (still air); at nominal coil power @ 25C; with normally open contact loaded; and with 4' (1.22 m) long, #10 AWG load wires. P.C. board relays were mounted to a 30A, single side P.C. board (6). Storage Temperature Range: -55C to 130C. Operating Temperature Range(1): -55C to +85C. Vibration, Operational: 0.065" (1.65mm) max. excursions from 10-55 Hz. with no contact opening >100s. Shock, Operational: 10g for 11 ms with no contact opening >100s. Shock, Mechanical: 100g. 140 Max. Alowable Ambient Temp. (C) 120 100 80 0A 10A 20A 60 40 20 Sealed Relay, Vented (note 3); Load Connections Via Q.C. Terminals, PC Mount 0 60 30A 80 100 120 140 160 Applied Continuous Coil Voltage (% of Rated Voltage) 180 Max. Alowable Ambient Temp. (C) 140 120 Termination: Printed circuit and quick connect terminals (4). Enclosures (all have 94V-0 flammability rating): T9AP: Unsealed, plastic dust cover. T9AS: Immersion cleanable, sealed plastic case (2 & 3). T9AV: Vented, flux-tight, plastic cover. Weight: Q.C. version: 1.2 oz. (33g) approx. (mounting code 2 & 5). Sealed Model T9AS: 0.9 oz. (26g) approx. (mounting code 1). 100 0A 10A 20A 80 60 Relay With Dust Cover, Flange Mount 40 60 30A 80 100 120 140 160 Applied Continuous Coil Voltage (% of Rated Voltage) 180 Notes 140 120 Max. Alowable Ambient Temp. (C) Mechanical Data 100 80 60 0A 10A 20A 40 20 Sealed Relay, Vented (note 3) PC Terminals For Coil & Contacts 0 60 30A 80 100 120 140 160 Applied Continuous Coil Voltage (% of Rated Voltage) 180 (1) Operating ambient temperature must consider "Must Operate Voltage Change Over Temperature," Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to cool) and Maximum Coil Temperature. Specification ambient considers 20A load with coil cooled to ambient. (2) Sealed relay terminals should not be bent. (3) Remove knock-off nib after cleaning process for optimum life of sealed relays. (4) Maximum soldering temperature is 500F for 4 seconds. (5) Class F coils are UL systems approved for maximum coil temperature of 140C, by change of resistance method. (6) See application note 13C265 for proper relay mounting, termination, cleaning and PC board conductor width. Coil rise test performed with 30A PC board to maintain 20C maximum rise @ 30A. Ordering Information Typical Part Number B T9A S 5 D 2 2 -12 1. Basic Series: T9A = Low cost, printed circuit board/panel power relay. 2. Enclosure: P = Unsealed, plastic dust cover (mounting code 5). S = Immersion cleanable, knock off nib, sealed plastic case (mounting codes 1 & 2). V = Vented, flux-tight (mounting code 1). 3. Contact Arrangement: 1 = 1 Form A (SPST-NO). 5 = 1 Form C (SPDT). 4. Coil Input: D = DC voltage (1 Watt) L = DC voltage (900mW) 5. Mounting & Termination: 1 = Printed circuit board mounting; PC terminals for coil & contacts (a). 2 = Printed circuit board mounting; PC terminals for coil & contacts, and .250" (6.35mm) quick connects for contacts (b). 5 = Flanged mounting; .187" (4.75mm) quick connects for coil and .250" (6.35mm) quick connects for contacts (c). 6. Contact Material: 2 = Silver-cadmium oxide. 7. Coil Voltage: 5 = 5VDC 9 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 48 = 48VDC a) Only available with enclosure code "S" & "V". 110 = 110VDC b) Only available with enclosure code "S". c) Only available with enclosure code "P". Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T9AP1D52-9 T9AP1D52-12 T9AP5D52-12 T9AP5D52-24 T9AS1D12-12 T9AS1D12-18 T9AS1D12-24 T9AS1D12-48 T9AS1D22-12 T9AS1D22-24 T9AS5D12-12 T9AS5D12-24 Dimensions are shown for reference purposes only. T9AS5D22-12 T9AS5D22-24 T9AV1L22-24 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 507 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions T9AS - Mounting & Termination Code 2 .250 x .032 QUICK (6.35 x .81) CONNECT T9AP - Mounting & Termination Code 5 .187 x .020 (4.75 x .508) QUICK CONNECT .130 .020 (3.30 .51) COM 1.980 MAX. (50.29) .045 x .045 (1.14 x 1.14) NO NO 1.280 MAX. (32.51) 1.713 .010 (43.51 .25) 1.280 MAX. (32.51) NC .032 x .062 (.81 x 1.57) NC 1.100 MAX. (27.94) .250 x .032 (6.35 x .81) QUICK CONNECT O .03 (.80) 2 PLACES COM 1.080 MAX. (27.43) 1.100 MAX. (27.94) 1.080 MAX. (27.43) .071 (1.80) RAD. FOR #6 SCREW Note: Recommended mounting screw torque is 4.0-5.0 lbs.in when #6 screw is used. T9AS/V - Mounting & Termination Code 1 .805 MAX. (20.4) .130 + .016 - .010 3.30 + .41 -.25 ( ) .032 x .062 (.8 x 1.6) TERMINALS .10 MAX. (2.54) .50 (12.8) .69 (17.6) .212 MAX. (5.38) 1.280 MAX. (32.51) .016 (.43) 1.08 MAX. (27.43) O .03 (.80) TERMINALS .045 x .045 (1.14 x 1.14) TERMINAL Wiring Diagrams (Bottom Views) PC Board Layouts (Bottom Views) 1 Form A T9AP/S - Mounting & Termination Code 2 1 Form C .140 MAX. (3.56) .250 MAX. (6.35) .300 .100 (7.62) (2.54) .081 .005 DIA. (2.06 .13) .078 .003 DIA. (1.98 .08) .043 .003 DIA. (1.09 .08) .600 (15.24) .500 (12.7) .150 (3.81) .550 (13.97) .700 (17.78) T9AS/V - Mounting & Termination Code 1 .212 MAX. (5.38) .300 (7.62) .100 (2.54) .081 .005 DIA. (2.06 .13) .078 .003 DIA. (1.98 .08) .600 (15.24) .500 (12.7) .043 .003 DIA. (1.09 .08) .150 (3.81) .550 (13.97) .700 (17.78) Dimensions are shown for 508 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 491 series AC Coil 20 Amp PC Board or Panel Mount Relay File E38802 File LR75282 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features * Up to 20 amp switching in SPST-NO and 13.3 amp in SPDT arrangements. * Washable, plastic sealed case available. * Meets UL 873 and UL 508 spacing - 1/8" through air, 1/4" over surface. * Load connections made via 1/4" Q. C. terminals. * Choice of UL Class B or F insulation system. * Well suited for various industrial, commercial and residential applications. Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Mechanical Life: 10 million operations, at 300 ops/minute. Electrical Life: 100,000 operations at factory rated load, 6 ops/minute. Minimum Contact Load: 1A @ 5VDC or 12VAC. Initial Contact Resistance: 50 milliohms @ 100mA, 6VDC). Contact Ratings @ 23C with relay properly vented. Remove tape from vent hole after soldering and cleaning. Factory Contact Ratings 240VAC 28VDC 1 Form A 1 Form B 20A 20A Load Type 240VAC 240VAC 240VAC 120VAC 240VAC 120VAC 120VAC 277VAC 28VDC General Purpose Resistive * Motor Motor LRA/FLA ** LRA/FLA Tungsten * Ballast Resistive Must Operate Voltage (Max.) 10.2 20.4 93.5 187 Must Release Voltage (Min.) 1.8 3.6 16 33 10A 6.7A (NC) 13.3A 13.3A 6.7A 6.7A 1 Form A 1 Form B 30A 30A 2 HP 1 HP 80/30 98/22 TV5 10A 20A Must Operate Voltage: 85% of nominal voltage or less. Must Release Voltage: 15% of nominal voltage or more. Operate Time (Including Bounce): 20 ms, max. Release Time (Including Bounce): 15 ms, max. At or From Nominal Coil Voltage Environmental Data Storage Temperature Range: -40C to 130C. Operating Temperature Range(1): -55C to +85C. Vibration, Operational: 0.065" (1.5mm) max. excursions from 10-55 Hz. Shock, Operational: 10g for 11 ms. Shock, Mechanical: 100g. 1 Form C (NO) UL/CSA Contact Ratings Voltage DC Resistance 10% (Ohms) 26 106 2,750 11,000 Operate Data @ 25C Contact Ratings @ 23C Voltage Nominal Voltage 12 24 110 220 15A 15A 1/2 HP 1/4 HP 30/10 - TV3 3A 10A 1 Form C (NO) (NC) 20A 20A 2 HP 1 HP 50/20 - TV5 10A 20A Mechanical Data Termination: Printed circuit and quick connect terminals (4). Enclosures (all have 94V-0 flammability rating): Open, unsealed dust cover or sealed case. Weight: 1.2 oz. (33g) approx. Coil Temperature Rise 10A 10A 1/2 HP 1/4 HP 20/7 - TV3 3A 10A Initial Dielectric Strength Between Open Contacts: 1,500V rms, 1 minute. Between Contacts and Coil: 1,500V rms, 1 minute. Initial Insulation Resistance Between Mutually Insulated Elements: 109 ohms, min., @ 500VDC, 23C and 50% R.H. Coil Data @ 23C Voltage: 12 to 220VAC. Nominal Coil Power: 2.0VA, (approx.). Maximum Coil Temperature(4): Class B: 130C. Class F: 155C. Duty Cycle: Continuous. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Notes (1) Operating ambient temperature must consider must operate voltage change over temperature, contact temperature rise, coil temperature rise (If coil is not allowed to cool) and maximum coil temperature. (2) Sealed relay terminals should not be bent. (3) Remove tape after cleaning process for optimum life of sealed relays. (4) Class B coils are UL systems approved for maximum coil temperature of 130C, by change of resistance method. Class F coils are UL systems approved for maximum coil temperature of 155C, by change of resistance method. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 509 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B 491 -1 1 G 2 00 1. Basic Series: 491 = AC coil, printed circuit board/panel power relay. 2. Enclosure & Terminals: 1 = Dust Cover, PC terminal. 2 = Sealed Case, PC terminal. 6 = Sealed Case, Panel Mount, .110 Coil Terminal. 3. Contact Arrangement: 1 = 1 Form C (SPDT) 4. Coil Input: P = 12VAC 7 = Sealed Case, Panel Mount, .187 Coil Terminal. 8 = Open Unit 4 = 1 Form B (SPST-NC) Q = 24VAC 5 = 1 Form A (SPST-NO) T = 120VAC U = 220VAC 5. Contacts: 2 = Silver-cadmium oxide 6. Coil Insulation and Special Features: 00 = Standard, UL Class B Coil Insulation System F0 = Special, UL Class F Coil Insulation System M0 = Magnetic Blowout (with enclosure 1 or 2 only, not UL or CSA) A1 - E9 = Special - Customer Specific Features Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. 491-21T200 491-21Q200 491-24T200 491-24Q200 491-61T200 491-61Q200 491-64T200 491-64Q200 Outline Dimensions .921 (23.4) 1.22 (31.1) 3 - .25 QC (6.35) Open Style 3 - .047 (1.2) .3 (7.7) .403 (10.24) 1.18 MAX. (30 MAX.) .7 (17.8) .9 (22.9) .11 (2.8) .4 (10.2) .15 (3.8) .63 (16.2) .21 (5.4) 2 - .024 DIA. (.6) PC Board Layout (Bottom View) Sealed Case for PC Board Mounting 1.08 MAX. (27.5) .138 (3.5) .11 (2.8) 1.10 MAX. (28) 3 - .08 DIA. (2) .3 (7.7) 1.26 MAX. (32.5) .6 (2.54) 2 - .04 DIA. (1) .24 (6.1) .55 (17.8) .25 QC (6.35) .7 (17.8) Reference Only Mounting Hole Pattern Sealed Case for Panel Mounting 1.08 MAX. (27.5 MAX.) 2 - 0.12 (3.2) DIA. or M3 1.10 MAX. (28 MAX.) 1.71 (43.5) .25 QC (6.35) 1.99 MAX. (50.3 MAX.) 1.71 (43.5) 1.28 MAX. (32.5 MAX.) .11 QC (2.8) Wiring Diagrams (Bottom Views) 1 Form A Dimensions are shown for 510 reference purposes only. 1 Form B 1 Form C Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T92 series Two-Pole, 30 Amp PC Board or Panel Mount Relay File E22575 File LR15734 File E22575 (type 2,3,4,5) File No. 5386 (type 1,2,3,4) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data (@ 25C Coil Temperature) * 30A DPST-NO and DPDT switching capabilities. * Designed to control compressor loads to 3.5 tons, 25.3 FLA, 110 LRA. * Extended life - >300,000 operations at 30A, 240VAC (DC coil). >100,000 operations at 30A, 240VAC (AC coil). * Meets requirements of UL873 and UL508 spacings. - .315" (8mm) through air, .375" (9.5mm) over surface. * Meets requirements of VDE 8mm spacing, 4kV dielectric coil-to-contacts. * Meets requirements of UL Class F construction. * UL approved for 600VAC switching (1.5HP). * Conforms to VDE 0435, 0631, and 0700. * New screw terminal version (consult factory for availability, ratings). Contact Ratings @ 25C with relay properly vented. Remove tape over vent hole after soldering and cleaning. Arrangements: 2 Form A (DPST-NO) and 2 Form C (DPDT). Materials: Silver cadmium oxide. Max. Load Rating: Normally Open Contacts: 30A @ 120/277VAC, resistive; 10A @ 600VAC, resistive; 1 HP @ 120VAC, 2.5 HP @ 240VAC;1.5 HP @ 480VAC, 1.5 HP @ 600VAC 110 LRA, 25.3 FLA, @ 240VAC with DC coil(1); 60 LRA, 14 FLA @ 240VAC with AC coil. 3A @ 240VAC pilot duty; 20A @ 28VDC; TV10 @ 120VAC. VDE Rating (Flange Mount): 25A @ 400VAC, 100K Ops. (30K Ops. for Form C Models). VDE Rating (PC Mount): 30A @ 400VAC, 100K Ops. (30K Ops. for Form C Models). Normally Closed Contacts: 3A @ 28VDC or 277VAC, 2A @ 480VAC, 1A @ 600VAC. VDE Rating (Flange or PC Mount): 3A @ 400VAC, 30K Ops. Min. Load Rating: Normally Open Contacts: 500mA @ 12VAC/VDC. Normally Closed Contacts: 100mA @ 6VAC/VDC. Expected Mechanical Life: 5 million operations. Expected Electrical Life: 100,000 operations at rated load. ARI 780-86 Endurance Test (section 6.6): HVAC Definite Purpose Contactor Standard Normally Open Contacts Single Phase/Two Pole (Both poles together switching a single load) 110 LRA, 25.3 FLA, 200K operations (DC Coil). L1 L2 T2 T1 Single Phase Per Pole (Single load per pole) 110 LRA, 18 FLA, 200K operations (DC Coil). 60 LRA, 14 FLA, 200K operations (AC Coil). L1 T1 Notes: Vent hole tape must be removed to achieve all listed ratings. Consult factory regarding ratings for screw terminal versions. Initial Dielectric Strength Between Contacts and Coil: 4,000V rms, 50/60 Hz. Between Open Contacts: 1,500V rms, 50/60 Hz. Between Poles: 2,000V rms, 50/60 Hz. Initial Insulation Resistance Between Mutually Insulated Elements: 109 ohms, min. @ 500VDC. T2 AC Coils (4.0VA) Nom. Voltage Freq. DC Resist. Nom. Voltage (VAC) (VAC) 10% (Ohms) 12 60 9.1 110/120 24 60 36.6 220/240 250/277 DC Resist. 10% (Ohms) 1,390 7,255 Freq. DC Resist. 10% (Ohms) 50/60 50/60 50/60 950 3800 5485 Ambient Temperature vs. Coil Voltage 120 AC Coi l0A AC Coi l 30 A 100 80 60 40 DC C oil 0 Amp Cont DC C act L oil 30 oad Am p Cont act L oad 20 0 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Assumptions: 1. Thermal resistance = 35C per Watt (DC only.) 2. Still air. 3. Nominal coil resistance. 4. Max. mean coil temperature = 155C (change of resistance method). 5. Coil temperature rise due to load = 6.3C @ 30 amps. 6. Curves are based on 1.7W at 25C (DC only.) Operate Data Must Operate Voltage: AC Coil: 80% of nominal voltage or less. DC Coil: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Initial Operate Time(2): 15 ms typical, (25 ms max. w/bounce). Initial Release Time(2): 10 ms typical, (25 ms max. w/bounce). Max Operating Frequency: 14 operations per minute. Environmental Data Temperature Range: Storage: -55C to +155C. Operating: AC Coil: -40C to +65C. DC Coil: -40C to +85C. Vibration: 0.065" (1.65mm) double amplitude for 10-55 Hz., functional. Shock, Operational: 10g for 11 ms, 1/2 sine wave pulse with no contact opening > 100s. Shock, Mechanical: 100g for 11 ms, 1/2 sine wave pulse. Flammability: UL 94V-0. Mechanical Data Termination: Printed circuit terminals; .250" (6.35mm) quick connects for coil and contacts; .187" (4.75mm) quick connects for coil and .250" (6.35mm) quick connects for contacts; or M4 screws with captive pressure plates for coil and contacts. Enclosure: Unsealed, plastic dust cover or immersion cleanable, tape sealed plastic cover. Weight: 3 oz. (86g) approximately. Conditions Coil Data Voltage: 12 through 110VDC and 12 through 277VAC. Resistance: See Coil Data table. Nom. Power: AC Coil: 4.0VA; DC Coil: 1.7W. Coil Temp. Rise: 35C/W. Max. Coil Temp.: 155C. Duty Cycle: Continuous. Dimensions are shown for reference purposes only. L2 DC Coils (1.7W) DC Resist. Nom. Voltage (VDC) 10% (Ohms) 86 48 350 110 Nom. Voltage (VDC) 12 24 Max. Allowable Ambient Temp. (C) Features Dimensions are in inches over (millimeters) unless otherwise specified. All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (25C ambient, 20-50% RH, 29.5 1" Hg.) unless otherwise noted. Notes (1) FLA, LRA ratings are compatible with 3.5 ton compressor applications. (2) Nominal voltage, no coil suppression, excluding bounce. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 511 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T92 S 11 D 2 2 -24 1. Basic Series: T92 = Printed circuit board / panel mount power relay. 2. Enclosure: P = Plastic dust cover (unsealed). S = Immersion cleanable, tape sealed plastic case (code 1). Top sealed, not immersion cleanable, not tape sealed on bottom (codes 2, 3 & 4). 3. Contact Arrangement: 7 = 2 form A (DPST-NO). 11 = 2 form C (DPDT). 4. Coil Input: A = AC voltage, 60 Hz. or 50/60 Hz. (See Coil Data Table) D = DC voltage. 5. Mounting & Termination: 1 = Printed circuit board mount; printed circuit board terminals. 2 = Panel mount via flanged cover; .250" (6.35mm) x .032" (.81mm) quick connect terminals. 3 = Panel mount via flanged cover; .187" (4.75mm) x .032" (.81mm) quick connect terminals for coil and .250" (6.35mm) for contacts. 4 = Panel mount via flanged cover, .187" (4.75mm) x .020" (.51mm) quick connect terminals for coil and .250" (6.35mm) for contacts. 5 = Panel mount via flanged cover, M4 screw terminals w/ captive pressure plates. Requires Enclosure P and Contact Arrangement 7. 6. Contact Material: 2 = Silver cadmium oxide. 7. Coil Voltage: (See Coil Data Table) (DC) 12 = 12VDC 24 = 24VDC 48 = 48VDC 110 = 110VDC (60Hz.) 12 = 12VAC 24 = 24VAC (50/60Hz.) 110 = 100/110VAC 120 = 110/120VAC 240 = 220/240VAC 277 = 250/277VAC New option. Consult factory for detailed ratings, specifications and availability. Stock Items - We recommend that our authorized distributors stock the following items for immediate delivery. T92P7A22-24 T92P7A22-120 T92P7A22-240 T92P7D12-12 T92P7D12-24 T92P7D22-12 T92P7D22-24 T92P11A22-24 T92P11A22-120 T92P11A22-240 T92P11D22-12 T92P11D22-24 T92S7D12-12 T92S7D12-24 T92S11D22-12 T92S11D22-24 Outline Dimensions Mounting & Termination Type 1 Mounting & Termination Types 2, 3 & 4 2.06 MAX. (52.32) 1.21 MAX. (30.73) 1.04 MAX. (26.42) .156 (3.96) .309 .005 (7.85 .13) 1.495 MAX. (37.97) .250 TYP. (6.35) 1.618 .020 (41.10 .51) .585 .005 (14.86 .13) 1.36 MAX. (34.54) 2.700 MAX. (68.58) 1.36 MAX. (34.54) 2.35 .005 (59.71 .13) 1.618 TYP. (41.10 .51) .585 .005 (14.86 .13) 1.000 .010 (25.40 .25) .630 .005 (16.00 .13) 2.05 MAX. (52.07) .047 TYP. (1.19) .032 TYP. (0.81) .309 .005 (7.85 .13) .090 RAD. (2.29) FOR #8 SCREW .630 TYP. (16.00) Mounting & Termination Type 5 Suggested PC Board Layout (Bottom View) 2.700 MAX. (68.58) 1.36 MAX. (34.54) .090 (2.29) RAD. FOR #8 SCREW 1.431 MAX. (36.34) 2.135 MAX. (54.23) 2.010 MAX. (51.05) .913 MAX. (23.19) Dimensions are shown for 0 1.618 (41.10) .185 (4.70) .365 (9.27) 2.35 .005 (59.71 .13) 512 reference purposes only. .309 (7.85) .585 (14.86) Wiring Diagram Dimensions are in inches over (millimeters) unless otherwise specified. 4 3 6 8 7 1 .630 (16.00) 1.000 (25.40) .203 TYP. (5.16) .162 (4.12) Note: 2 .052 TYP. (1.32) Only necessary terminals are present on single throw models. .072 TYP. (1.83) An alternate PC board layout utilizes .076 .003 (1.93 .076) diameter holes on the same center-to-center spacing shown above. Use of the rectangular holes is recommended for improved solderability. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAYS WITH FORCIBLY-GUIDED CONTACTS Alphanumeric Index Series Type Page SR2M (V23047) ......... 2 Pole Relay ...................................... 603 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays . 301-336 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Relays with Forcibly Guided Contacts ...... 601-614 6 Plug-in/Panel Mount General Purpose Relays................ 80-88 7 SR4 D/M .................... 4 Pole Relay ...................................... 606 SR6 (V23050) ............ 6 Pole Relay ...................................... 609 SR6 D/M .................... 4 Pole Relay ...................................... 607 SR6S ......................... Sensitive 6 Pole Relay ...................... 611 SR6Z .......................... 6 Pole Relay Module ......................... 613 V23047 (SR2M) ......... 2 Pole Relay ...................................... 603 V23050 (SR6) ............ 6 Pole Relay ...................................... 609 Definitions - Relays with forcibly guided contacts ("safety relays") Power Relays & Definite Contactors...................... 89-131 8 General Information Function Purpose Relays with forced guidance contacts play a decisive role in avoiding accidents on machines and in systems. Safety control circuits enable to switch into the fail safe state. Forcibly guided contacts monitor the function of the safety control circuits. For this safety function, all the assumed faults that can occur must already have been taken into consideration and their effects examined. Standard EN 50205 "Relays with forcibly guided contacts" contains current internationally-defined design requirements. Relays with forcibly guided contacts that comply with EN 50205 are also referred as "safety" relays. Power relays with forcibly guided (linked) contacts: Power relays with at least one Latching, Impulse &break contact and at least one make contact designed that by mechanical means make and break contacts Rotary Relays ............................... 149-154 can never be simultaneously in the closed position. Contact gaps shall never be less than 0.5 mm over the operating life, not only under normal operating conditions, but also when a fault occurs. Automotive Relays ...................... 141-148 This requirement allows the respective exclusive-or contact to detect the fault of a contact to open. For example, the welding of a make contact is indicated by the non-closing of the break contact when the Solid State Relays energization is switched off. & 9 10 Input/Output Modules ................ 195-207 11 To fulfill the specifications of the standard, the assumed faults must be considered: Time Delay Relays & Assumed fault Failure of the contact to open due to welding Failure of the contact to open due to failure of the drive Breakage of the contact spring Dimensions are shown for reference purposes only. Effect Counters ........................................ 208-232 The failure of any make contact to open has the effect that none of the break contacts close even when the relay is not energized. The failure of any break contact to open has the effect that none of the make contacts close when the relay is energized. Sensors & Monitors ................... 233-234 The drive has no effect on the forcibly guided contact operation. Simultaneous closing of the break and make contacts is not possible even as a High Performance Relays(SR2, SR4, SR6) or result of breakage. Completely insulated contact chambers barriers (SR2M) guarantee a contact gap of 0.5 mm. and Contactors (overview) ....... 233-234 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 12 13 14 www.tycoelectronics.com Technical support: 601 Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAYS WITH FORCIBLY-GUIDED CONTACTS Application Example - Relays with forcibly guided contacts ("safety relays") The configuration of safety control circuits is basically only possible with specified fault conditions. Safety relays have the characteristic that make and break contacts can never both be closed at the same time. The following circuit diagram shows an emergency stop control circuit consisting of three 4-pole safety relays. Operation - Closing the "ON" switch causes the K1 relay to be pulled in - The K2 and K3 relays are energized via the make contacts K1-1 and K1-2 and hold themselves via K2-2 or K3-2 - The break contacts K2-1 and K3-1 cause the drop-out of K1 where the load circuit is released via the break contacts of K1-3 or K1-4. The first fault to occur - does not cause the safety function to fail because more components are used than required for the circuit to function (redundancy). - prevents an restart and can be detected as a result (self monitoring) Fault analysis (examples): Type of fault Failure of contact K2-3 to open Is there any danger arising from the fault? Is a restart possible? No, K3-3 opens when the emergency stop switch is actuated No, K2-1 and K2-3 cannot be closed at the same time (fault excluded by forcibly guidance). Failure of contact No, K2-3 and K3-3 open when the "ON" button does not cause K1 to close No, K1-1 and K1-2 cannot close due to K1-3 to open emergency stop switch is actuated closed K1-3. K2 and K3 are not energized Dimensions are shown for 602 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK V23047 series SR2M "Safety Relay" - PCB, neutral, monostable relay with two forcibly guided contacts. File E214024 No. 116064 TUV-Rheinland, No. 945/EZ 116/99 VDE .. TUV Rheinland Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Insulation Resistance * * * * Between Mutually Insulated Elements: 106 ohms. 1 NO and 1 NC or 2 Form C contacts. High insulation spacing for the safe separation of the contact circuits. Sealed case. Ideal for emergency shut-off, machine control, elevator and escalator control, light barrier control. Contact Data @ 23C Type: Single button contacts, forcibly guided. Arrangements: 1 NO and 1 NC or 2 Form C. Material: Silver-nickel alloy. Max. Continuous Current at Max. Amb. Temp.: 6A, 1 contact loaded. Max. Switched Current: See Expected Electrical Life chart. Max. Switched Voltage: 250VDC. Max. Switched Power: 1,500VA. (See Fig. 1, Limit Curve for DC Power Load). Max. Switching Rate: 6 operations/min. at rated load. 300 operations/min. at minimum load. Minimum Load: AgNi: >50mW. Initial Contact Resistance: AgNi: 100 m - 1A/24VDC. Expected Mechanical Life: 107 operations. Coil Data @ 23C Voltage: 5 to 110VDC. Nominal Power: 700mW. Max. Coil Temperature: 105C. Duty Cycle: Continuous. Coil Data @ 23C Rated Coil Voltage (VDC) Coil Resistance (Ohms) Must Operate Voltage (VDC) 5 6 9 12 21 24 36 48 60 80 110 35.7 3.6 51 5.1 116 11.6 206 20.6 630 63.0 823 82.3 1,851 185 3,291 494 5,142 617 9,143 1,097 17,285 2,074 3.75 4.5 6.8 9 15.8 18 27 36 45 60 83 Expected Electrical Life: 6A @ 250VAC, Resistive, 100,000 ops. @ 70C amb. temp.; 10/0.5A @ 110VAC, Inductive, 2,000,000 ops. @ 23C amb. temp.; 6A/230VAC, 100,000 ops. @ 70C amb. temp.; 140 118 78 60 34 30 19.5 14.6 11.7 8.8 6.4 6A/24VDC, T0.95 = 300ms, switchcycle 0.1 Hz., Standard IEC947-5-1 (DC-13), NO contact loaded; Operate Data @ 23C Standard IEC947-5-1 (AC-15), power factor 0.3; switchcycle 0.1 Hz., NO contact: 3A/230VAC, inrush current 30A, 6,050 ops., NC contact: 1.5A/230VAC, inrush current 15A, 6,050 ops; Operate Time: 10 ms (excluding bounce). Release Time (w/o parallel diode, typ.): 4 ms (excluding bounce). Bounce Time: 10 ms. Must Release Voltage: 10% of nominal voltage. 1A/24VDC, T0.95 = 144ms, switchcycle 0.33 Hz., Diode (1N4007) across the inductive load, Standard IEC947-5-1 (DC-13), NO contact loaded, 1,500,000 ops. Figure 1 - Limiting Curve for DC Power Load 1000 500 20 50 0W 0W 100 20 50 W Max. Allowed Ambient Temp. vs. Applied Coil Voltage 2.0 Operating 1.9 Applied Coil Voltage (% of rated nom.) 3A/24VDC, T0.95 = 300ms, switchcycle 0.33 Hz., Diode (1N4007) across the inductive load, Standard IEC947-5-1 (DC-13), NO contact loaded, 1,000,000 ops; Switching Voltage (VDC) Nominal Coil Current (mA) Curve 1 - Must operate voltage when the coil is not pre-energized. 1.8 1.7 1.6 Curve 2 - Operate voltage raises due to a pre-energizing with 1.1 x Vnom. 1.5 Curve 3 - Maximum allowable voltage. 1.4 Release 1.3 1.2 Curve 3 1.1 The must release voltage may fall to W 5% of Vnom during operation life of the relay. 1.0 0.9 Curve 2 Curve 1 0.8 Denotes recommended operation area. 0.7 W 10 0 10 W 0.6 -20 -10 0 10 20 30 40 50 60 70 W Max. Allowable Ambient Temperature (C) 10 0.1 1 10 Switching Current (Amps DC) Environmental Data Temperature Range: -25C to +70C. Solder Bath Temp./Max. Duration: 260C/5s. Initial Dielectric Strength Mechanical Data Between Open Contacts: 1,000V rms. Between Adjacent Contacts: 4,000V rms. Between Coil and Contacts: 4,000V rms. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Sealed plastic case. Weight: 0.6 oz. (18g). Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 603 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23047 A1 012 A 5 01 1. Basic Series: V23047 = SR2M safety relay. 2. Enclosure: A1 = Sealed. 3. Coil Voltage: 005 = 5VDC 036 = 36VDC 006 = 6VDC 048 = 48VDC 009 = 9VDC 060 = 60VDC 012 = 12VDC 080 = 80VDC 021 = 21VDC 110 = 110VDC 024 = 24VDC 4. Contact Type: A = Single button, forcibly guided. 5. Contact Material: 5 = Silver nickel. 6. Contact Arrangement: 01 = 2 Form C. 11 = 1 NO and 1 NC. Our authorized distributors are more likely to stock the following items for immediate delivery. V23047A1012A501 V23047A1012A511 Wiring Diagrams (Bottom Views) Outline Dimensions 1 NO and 1 NC 1.14 MAX. (29.0) .50 (12.6) A1 A2 11 21 14 22 12 22 11 21 14 24 1 (25.4) .094 (2.4) 2 Form C .130 (3.3) A1 A2 Suggested PC Board Layouts (Bottom Views) 1 NO and 1 NC 2 Form C .098 - 1.0 (2.5 - 2.54) .051 .051 (1.3) (1.3) .098 - 1.0 (2.5 - 2.54) .098 - 1.0 (2.5 - 2.54) Dimensions are shown for 604 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. .098 - 1.0 (2.5 - 2.54) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Sockets for V23047 Series Relays RP78602 RT78625 Socket with PCB Terminals DIN Rail Mount Socket with Screw-Type Terminals .098 - 1.0 (2.5 - 2.54) .059 (1.5) .354 (9.0) 21 11 24 14 Retainer 1.22 (31.0) Relay 2.97 (75.5) .098 - 1.0 (2.5 - 2.54) .425 (10.8) .50 (12.7) Module .189 (4.8) A2 A1 22 12 .61 (15.5) .177 (4.5) .874 (22.2) 2.68 (68.0) RP16104 Plastic Retaining Clip RT78626 DIN Rail Mount Socket with Screw-Type Terminals 22 12 21 11 24 14 Relay 2.97 (75.5) Retainer Module A2 A1 .61 (15.5) 3.07 (78.0) RP16104 Plastic Retaining Clip RT16040 Marking Tags Function and Protection Modules .236 (6.0) * Easy insertion of module into the socket. * Wiring in parallel to the coil. .059 (1.5) * White * Marking area .610 (15.5) x .236 (6.0). * Snaps on socket in up to 4 positions. Ordering Code RT16040 RPMT00A0 RPML0024 RPML0524 RPML0110 Type Marking Tags Protection Diode 1N4007* LED 12 - 24VDC* LED 12 - 48VDC LED 110VDC* * Standard Polarity: A1:+, A2:- Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 605 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK SR4 D/M series "Safety Relay" with four forcibly guided contacts. File E214024 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data DC @ 20C * 2 NO + 2NC or 3NO + 1 NC contacts. * 4kV/10mm contact-to-coil. * Compact package. * Well suited for emergency shut-off, machine control, elevator and escalator control, light barrier control. Nominal Coil Power: 800mW. DC Resistance in Ohms Nominal Voltage VDC Contact Data 5 6 9 12 15 18 21 24 36 40 48 60 85 110 Type: Single button contact, forcibly guided. Arrangements: 2 NO + 2NC or 3NO + 1 NC. Material: Silver-tin oxide. Expected Mechanical Life: 10 million operations. Ratings: Current: 8A. Voltage: 250VAC. Voltage (breaking): 440VAC. Power (breaking): 2,000VA. Minimum Contact Load: >50mW. Initial Contact Resistance: 100 millohms/1A/24VDC; 20 millohms/10mA/5VDC. Initial Dielectric Strength 31 45 101 180 281 405 551 720 1,620 2,000 2,880 4,500 9,031 15125 Must Operate Voltage VDC Drop-out Voltage VDC 3.8 4.5 6.8 9.0 11.3 13.5 15.8 18.0 27.0 30.0 25.0 45.0 64.0 82.5 0.5 0.6 0.9 1.2 1.5 1.8 2.1 2.4 3.6 4.0 4.8 6.0 8.5 11.0 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Nominal Coil Current (mA) 161.3 133.3 89.1 66.7 53.4 44.4 38.1 33.3 22.2 20.0 16.7 13.3 9.4 7.3 All values are given for coil without preenergization, at 20C ambient. At 70C after preenergization with 1.1 x nominal voltage, the maximum operating voltage is 85% of nominal. At 70C maximum coil voltage is 1.1 x nominal. Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 4,000Vrms. Between Contact Sets: 2,500Vrms. Creepage/Clearance: Contact-to-coil: 10/10mm. Between Contact Sets: 3/3.5mm. Environmental Data Initial Insulation Resistance Between Mutually Insulated Elements: 106 ohms. Temperature Range: Operating: -20C to +70C. Vibration (10-200 Hz.): NO: 8g; NC: 2.5g. Operate Data Mechanical Data Must Operate Voltage: See Coil Data table. Operate Time /Release Time (typical): 12 ms / 20 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Termination: Printed circuit terminals. Enclosure: Sealed (RTIII) plastic case. Weight: 0.56 oz. (16 g) approximately. Ordering Information Typical Part Number B SR4 1. Basic Series: SR4 = 4 pole printed circuit board relay with forcibly guided contacts. 2. Contact Configuration: D = 2 NO + 2 NC contacts M = 3 NO + 1 NC contacts 3. Contact Material: 4 = Silver-tin oxide. 4. Coil Voltage: 005 = 5VDC 009 = 9VDC 015 = 15VDC 021 = 21VDC 006 = 6VDC 012 = 12VDC 018 = 18VDC 024 = 24VDC 036 = 36VDC 040 = 40VDC D 048 = 48VDC 060 = 60VDC 4 012 085 = 85VDC 110 = 110VDC Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. PC Board Layout (Bottom View) Outline Dimensions 1.57 (40) .51 (13) .63 (16) .130 (3.3) Wiring Diagrams (Bottom Views) .051 + .004 DIA. (1.3 + .1) .299 (7.6) .134 (3.4) 2 NO + 2 NC .7106 (18.05) .197 (5.0) .256 (6.5) .197 (5.0) 3 NO + 1 NC Dimensions are shown for 606 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK SR6 D/M series "Safety Relay" with four forcibly guided contacts and large spacings, improved isolation File E214024 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Insulation Resistance * 2 NO + 2NC or 3NO + 1 NC contacts. * Large spacings for improved isolation. * Well suited for emergency shut-off, machine control, elevator and escalator control, light barrier control Between Mutually Insulated Elements: 106 ohms. Operate Data Must Operate Voltage: See Coil Data table. Operate Time /Release Time (typical): 11 ms / 3ms. Switching Rate: 3,600 ops./hr. max. at rated load. Contact Data Type: Single button contact, forcibly guided. Arrangements: 2 NO + 2NC or 3NO + 1 NC. Material: Silver-tin oxide. Expected Mechanical Life: 10 million operations. Ratings: Current: 8A. Voltage: 250VAC. Voltage (breaking): 440VAC. Power (breaking): 2,000VA. Minimum Contact Load: >50mW. Initial Contact Resistance: 100 millohms/1A/24VDC; 20 millohms/10mA/5VDC. Environmental Data Temperature Range: Operating: -20C to +70C. Vibration (10-200 Hz.): NO: 8g; NC: 5g. Shock (functional) 16ms, half-sine: NO: 8g; NC: 6g. Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. Weight: 1.06 oz. (30 g) approximately. Initial Dielectric Strength Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 3,000Vrms. Between Contact Sets: 3,000Vrms; 4,000Vrms, in longitudinal direction. Creepage/Clearance: Contact-to-coil: 5.5/5.5mm. Between Contact Sets: 5.5/5.5mm; 12/12mm, in longitudinal direction. Max. DC Load Breaking Capacity Coil Data DC @ 20C Nominal Coil Power: 800mW. 5 6 9 12 18 21 24 36 40 48 60 85 110 DC Resistance in Ohms 21 30 68 120 270 368 480 1,080 1,333 1,920 3,000 6,021 10,080 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 12% 12% 12% Must Operate Voltage VDC Drop-out Voltage VDC 3.8 4.5 6.8 9.0 13.5 15.8 18.0 27.0 30.0 25.0 45.0 64.0 82.5 0.5 0.6 0.9 1.2 1.8 2.1 2.4 3.6 4.0 4.8 6.0 8.5 11.0 Nominal Coil Current (mA) 238.1 200.0 132.4 100.0 66.7 57.1 50.0 33.3 30.0 25.0 20.0 14.1 10.9 All values are given for coil without preenergization, at 20C ambient. At 70C after preenergization with 1.1 x nominal voltage, the maximum operating voltage is 85% of nominal. At 70C maximum coil voltage is 1.1 x nominal. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Coil Operating Range Applied coil voltage (U/Un) Nominal Voltage VDC Nominal coil voltage (Un) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 607 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B SR6 D 1. Basic Series: SR6 = 4 pole printed circuit board relay with forcibly guided contacts, increased spacing. 2. Contact Configuration: D = 2 NO + 2 NC contacts M = 3 NO + 1 NC contacts 3. Contact Material: 4 = Silver-tin oxide. 4. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 024 = 24VDC 040 = 40VDC 006 = 6VDC 012 = 12VDC 021 = 21VDC 036 = 36VDC 048 = 48VDC 4 060 = 60VDC 085 = 85VDC 012 110 = 110VDC Our authorized distributors are more likely to stock the following items for immediate delivery . None at present. PC Board Layouts (Bottom Views) Outline Dimensions 2.165 MAX. (55) .65 (16.5) .63 (16) .051 + .004 DIA. (1.3 + .1) .492 (12.5) .126 (3.2) .096 (2.45) .886 (22.5) .197 (5.0) .886 .197 (22.5) (5) .051 + .004 DIA. (1.3 + .1) .709 (18) .709 (18) .925 (23.5) .197 (5) .669 (17) 2 NO + 2 NC .394 (10) 3 NO + 1 NC .197 (5.0) .197 (5) .492 (12.5) .096 (2.45) .394 (10) .197 (5) Wiring Diagrams (Bottom Views) 2 NO + 2 NC 3 NO + 1 NC Dimensions are shown for 608 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK V23050 series SR6 "Safety Relay" - PCB, neutral, monostable relay with six forcibly guided contacts. VDE .. TUV Rheinland File E214024 No. 116064 TUV-Rheinland, No. 945/EZ 116/99 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data @ 23C * 4 NO and 2 NC or 3 NO and 3 NC or 5 NO and 1 NC contacts. * Extremely compact. * High insulation spacing for the safe separation of the contact circuits. * Sealed case. * Ideal for emergency shut-off, machine control, elevator and escalator control, light barrier control. Minimum Release Voltage: 10% of nominal voltage. Minimum Operating Voltage @ 70C: 85% of nominal voltage. Environmental Data Temperature Range: -25C to +70C. Solder Bath Temp./Max. Duration: 260C/5s. Contact Data @ 23C Type: Single button contacts, forcibly guided. Arrangements: 3 NO and 3 NC, 4 NO and 2 NC or 5 NO and 1 NC. Material: Silver nickel alloy. Max. Continuous Current at Max. Amb. Temp.: 8A, 1 contact loaded. Max. Switched Voltage: 400VAC/VDC. Max. Switched Power: 2,000VA. Max. Switching Rate: 6 operations/min. at rated load. 600 operations/min. at minimum load. Minimum Load: 50mW. Initial Contact Resistance: 100 m - 1A/24VDC. Expected Mechanical Life: 107 operations. Electrical Life: 250VAC, 70C ambient, 1 NO loaded with 8A and 1 NC loaded with 5A: 75,000 operations. Mechanical Data Termination: Printed circuit terminals. Enclosure (UL94V-2 Flammability Ratings): Sealed (RTIII) plastic case. Weight: 1.01 oz. (30g). Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000VAC rms. Between Adjacent Contacts: 3,000VAC rms. Between Coil and Contacts: 3,000VAC rms. Coil Data @ 23C Voltage: 5 to 110VDC. Nominal Power: 1.2W. Max. Coil Temperature: 130C. Duty Cycle: Continuous. Coil Data @ 23C Rated Coil Voltage (VDC) Coil Resistance (Ohms) Must Operate Voltage (VDC) Nominal Coil Current (mA) 5 6 9 12 18 21 24 40 60 85 110 21 2 30 3 68 7 120 12 270 27 370 40 480 50 1,330 130 3,000 300 6,020 600 10,000 1,000 3.75 4.5 6.8 9.0 13.5 15.8 18.0 30.0 45.0 64.0 82.5 240 200 130 100 70 60 50 30 20 14 11 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Applied coil voltage (U/Un) Coil Operating Range Nominal coil voltage (Un) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 609 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23050 A1 012 A 5 33 1. Basic Series: V23050 = SR6 safety relay. 2. Enclosure: A1 = Sealed. 3. Coil Voltage: 005 = 5VDC 024= 24VDC 006 = 6VDC 040 = 40VDC 009= 9VDC 060= 60VDC 012 = 12VDC 085 = 85VDC 021= 21VDC 110 = 110VDC 4. Contact Type: A = Single contact. 5. Contact Material: 5 = Silver nickel. 6. Contact Arrangement: 33 = 3 NO and 3 NC. 42 = 4 NO and 2 NC. 51 = 5 NO and 1 NC. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions 2.17 MAX. (55.0) .65 MAX. (16.5) .126 (3.2) .63 MAX. (16.0) Wiring Diagrams (Bottom Views) 4 NO and 2 NC 3 NO and 3 NC A2 A1 22 21 41 44 61 64 12 11 32 31 51 54 A2 A1 5 NO and 1 NC 22 21 41 44 61 64 12 11 31 34 51 54 A2 A1 21 24 41 44 61 64 12 11 31 34 51 54 Suggested PC Board Layouts (Bottom Views) 3 NO and 3 NC, 4 NO and 2 NC .051 (1.3) 5 NO and 1 NC +.004 o .051 (1.3 + 0.1) .197 (5.0) .49 (12.5) .096 (2.45) .886 (22.5) .394 (10) .197 (5.0) .888 (22.5) Dimensions are shown for 610 reference purposes only. .197 (5.0) .256 (6.5) .256 (6.5) .256 (6.5) .492 (12.5) .256 (6.5) .096 (2.45) Dimensions are in inches over (millimeters) unless otherwise specified. .197 (5.0) .197 (5.0) .197 (5.0) .394 (10.0) .925 (23.5) .197 (5.0) .236 (6.0) .236 (6.0) .197 (5.0) .197 (5.0) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK SR6 Sensitive series Sensitive "Safety Relay" with six forcibly guided contacts. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Insulation Resistance * 4 NO + 2NC, 3 NO + 3 NC or 5 NO + 1 NC contacts. * Polarized, 800mW coil. * 6 kV surge resistance between poles. * Well suited for emergency shut-off, machine control, elevator and escalator control, light barrier control Between Mutually Insulated Elements: 106 ohms. Contact Data Operate Data Type: Single button contact, forcibly guided. Arrangements: 4 NO + 2NC, 3 NO + 3 NC or 5 NO + 1 NC. Material: Silver-tin oxide. Expected Mechanical Life: 10 million operations. Ratings: Current: 8A. Voltage: 250VAC. Voltage (breaking): 440VAC. Power (breaking): 2,000VA. Minimum Contact Load: >50mW. Initial Contact Resistance: 100 millohms/1A/24VDC; 20 millohms/10mA/5VDC. Must Operate Voltage: See Coil Data table. Operate Time /Release Time (typical): 11 ms / 3ms. Switching Rate: 3,600 ops./hr. max. at rated load. Environmental Data Temperature Range: Operating: -20C to +70C. Vibration (10-200 Hz.): NO: 8g; NC: 5g. Shock (functional) 16ms, half-sine: NO: 8g; NC: 6g. Initial Dielectric Strength Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 3,000Vrms. Between Contact Sets: 3,000Vrms. Creepage/Clearance: Contact-to-coil: 5.5/5.5mm. Between Contact Sets: 5.5/5.5mm. Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. Weight: 1.06 oz. (30 g) approximately. Coil Data DC @ 20C Nominal Coil Power: 800mW. Nominal Voltage VDC 5 6 9 12 15 18 21 24 36 40 48 DC Resistance in Ohms 31 45 101 180 281 405 551 720 1,620 2,000 2,880 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Must Operate Voltage VDC 3.8 4.5 6.8 9.0 11.3 13.5 15.8 18.0 27.0 30.0 25.0 Drop-out Voltage VDC 0.5 0.6 0.9 1.2 1.5 1.8 2.1 2.4 3.6 4.0 4.8 Nominal Coil Current (mA) Max. DC Load Breaking Capacity 161.3 133.3 89.1 66.7 53.4 44.4 38.1 33.3 22.2 20.0 16.7 All values are given for coil without preenergization, at 20C ambient. At 70C after preenergization with 1.1 x nominal voltage, the maximum operating voltage is 85% of nominal. At 70C maximum coil voltage is 1.1 x nominal. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 611 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B SR6 1. Basic Series: SR6 = 6 pole printed circuit board relay with forcibly guided contacts. 2. Contact Configuration: A = 3 NO + 3 NC contacts B = 4 NO + 2 NC contacts C = 5 NO + 1 NC contacts 3. Contact Material: 4 = Silver-tin oxide. 3. Coil Type: S = Sensitive coil. 5. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 024 = 24VDC 040 = 40VDC 006 = 6VDC 012 = 12VDC 021 = 21VDC 036 = 36VDC 048 = 48VDC A 4 060 = 60VDC 085 = 85VDC S 012 110 = 110VDC Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 2.17 MAX. (55.0) .65 MAX. (16.5) A2 .126 (3.2) .63 MAX. (16.0) A1 22 21 41 44 61 64 12 11 32 31 51 54 3 NO + 3 NC PC Board Layouts (Bottom Views) A2 .051 (1.3) .197 (5.0) A1 .49 (12.5) .394 (10) .197 (5.0) +.004 o .051 (1.3 + 0.1) .256 (6.5) .492 (12.5) .096 (2.45) Dimensions are shown for 612 reference purposes only. 51 54 4 NO + 2 NC .236 (6.0) .236 (6.0) 21 24 41 44 61 64 12 11 31 34 51 54 5 NO + 1 NC .197 (5.0) .197 (5.0) .394 (10.0) .197 (5.0) A2 A1 .256 (6.5) .925 (23.5) 61 64 31 34 3 NO + 3 NC and 4 NO + 2 NC .256 (6.5) .256 (6.5) .197 (5.0) .886 (22.5) 41 44 12 11 .197 (5.0) .888 (22.5) .096 (2.45) 22 21 5 NO + 1 NC .197 (5.0) .197 (5.0) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK SR6 Z series 6-pole "Safety Relay" on DIN-rail module. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data DC @ 20C * 6-pole SR6 relay mounted to PC board on DIN-rail module. * AC/DC input. * Spring connectors. * Module is 1.81 in (46mm) wide. * Well suited for emergency shut-off, machine control, elevator and escalator control, light barrier control Nominal DC Voltage: 24VDC. Nominal AC/DC Voltage: 24, 115VAC/VDC. Nominal AC Voltage: 230VAC. Minimum Operating Voltage: 90% of nominal. Minimum Release Voltage: 10% of nominal. Maximum Operating Voltage: 110% of nominal. Input Circuit: Bridge rectifier, series resistor. Contact Data Type: Single button contact, forcibly guided. Arrangements: 4 NO + 2NC, 3 NO + 3 NC or 5 NO + 1 NC. Material: Silver-tin oxide. Expected Mechanical Life: 10 million operations. Ratings: Current: 8A. Voltage: 250VAC. Voltage (breaking): 440VAC. Power (breaking): 2,000VA. Minimum Contact Load: >50mW. Initial Contact Resistance: 100 millohms/1A/24VDC; 20 millohms/10mA/5VDC. Operate Data Switching Rate: 3,600 ops./hr. max. at rated load. Environmental Data Temperature Range: Operating: -20C to +50C. Mechanical Data Termination: Spring clamp connections. Acceptable Wire Sizes: 14 - 18 AWG.. Weight: 3.17 oz. (90 g) approximately. Initial Dielectric Strength Ordering Information Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 3,000Vrms. Between Contact Sets: 2,000Vrms. Creepage/Clearance: Contact-to-coil: 5.5/5.5mm. Between Contact Sets: 3/3mm. Typical Part Number Outline Dimensions Module width: 1.81 in (46 mm). Module length: 3.42 in (87 mm). Mounted height: 2.12 - 2.28 in. (54 - 58 mm) depending upon DIN rail. Module fits mounting rails per DIN EN 50022 or DIN EN 50035. B SR6Z A 024 1. Basic Series: SR6Z = 6 pole relay with forcibly guided contacts on DIN-rail module. 2. Contact Configuration: A = 3 NO + 3 NC contacts B = 4 NO + 2 NC contacts C = 5 NO + 1 NC contacts 5. Coil Voltage: 024 = 24VDC 524 = 24VAC/VDC 615 = 115VAC/VDC 730 = 230VAC Distributors are more likely to stock the following items. None at present. Wiring Diagrams (Bottom Views) DC Module, 4 NO + 2 NC DC Module, 5 NO + 1 NC AC/DC Module, 3 NO + 3 NC DC Module, 3 NO + 3 NC AC/DC Module, 4 NO + 2 NC AC/DC Module, 5 NO + 1 NC Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 613 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Engineering Notes Dimensions are shown for 614 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PLUG-IN / PANEL MOUNT RELAYS Alphanumeric Index Series Type Page 0419 .......................... Relay w/Dust Cover .......................... 745 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays . 301-336 3 K10 ............................ Relay w/Dust Cover .......................... 720 KA .............................. Open Relay ....................................... 737 KH/KHA ..................... Relay w/Dust Cover .......................... 709 KHS ........................... Hermetically Sealed Relay ................ 709 KRP-3-H ................... Relay w/Dust Cover .......................... 739 KR-E .......................... Hermetically Sealed Relay ................ 737 KRP/KRPA ................. Relay w/Dust Cover .......................... 737 KU/KUP ..................... Open Relay or Relay w/Dust Cover .. 723 KUE/KUEP ................. Open Relay or Relay w/Dust Cover .. 723 KUGP ......................... Relay w/Dust Cover .......................... 723 NOTE: A question tree that may help you in selecting an appropriate relay for your application can be found on the next page. Mid-Range PC Board Relays ....... 19-21 4 KUIP .......................... Relay w/Dust Cover .......................... 723 KUM/KUMP ............... Open Relay or Relay w/Dust Cover .. 723 KUP93 ....................... Relay w/Dust Cover .......................... 731 Power PC Board Relays ................ 22-35 5 Relays with Forcibly-Guided Contacts.............. 36-79 6 Plug-in/Panel Mount General Purpose Relays ........ 701-752 7 Power Relays & Definite Purpose Contactors...................... 89-131 8 Latching, Impulse & Rotary Relays ............................... 149-154 9 MT ............................. Relay w/Dust Cover .......................... 742 PCL/PCLH ................. Relay w/Dust Cover .......................... 713 PT .............................. Relay w/Dust Cover .......................... 717 R10-R ........................ Immersion-Cleanable Relay .............. 703 R10 ............................ Relay w/Dust Cover .......................... 703 RM ............................ Relay w/Dust Cover .......................... 733 Socket Usage Guide ............................................................. 749 Track Mount System ............................................................ 747 Mature Products Some mature product series are no longer described in the technical databook, as they no longer represent the most effective solution for many new design requirements. However, certain models within these series are currently available, in varying quantities, for retrofit applications. Some of these products are scheduled for obsolescence or discontinuance in the near future. Contact technical support (see inside back cover) for suggestions regarding alternate products which may be appropriate for your application. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 10 NOTE: Many of the relay products described in this section are Automotive Relays ...................... 141-148 also available with printed circuit board terminals as an option. Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Specifications and availability subject to change. www.tycoelectronics.com Technical support: 701 Refer to inside back cover. Catalog 1308242 Issued 3-03 PLUG-IN / PANEL MOUNT RELAYS Plug-in / Panel Mount General Purpose (20A) Relay Question Tree This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a relay for a particular application. Several relay product families are quite broad (i.e., R10, KU), and only the basic family designator, not the actual product series designator (i.e., R10S, KUIP) is listed in this guide. Contact Switch Rating? 0 to 3 amps* 3 to 10 amps* 10 to 20 amps* AC or DC Coil? AC or DC Coil? AC or DC Coil? AC Coil DC Coil AC Coil DC Coil AC Coil DC Coil Number of Poles? Number of Poles? Number of Poles? Number of Poles? Number of Poles? Number of Poles? One Pole Two + Poles One Pole Two + Poles One Pole Two + Poles One Pole Two + Poles One Pole Two + Poles One Pole Two + Poles R10 KHA R10 R10 KHA R10 KA KRPA KU PCLH R10 K10 KA KHA KRPA KU MT PCLH PT R10 RM KA KRPA KU PCLH R10 K10 KA KHA KRPA KU MT PCLH PT R10 RM KA KRPA KR-3 KU PCLH 0419 K10 KA KRPA KU PCLH RM KA KRPA KR-3 KU PCLH 0419 K10 KA KRPA KU PCLH RM * Typical loads at 28VDC or 120VAC, resistive, for comparison purposes. See catalog pages for a given series for detailed rating specifications. 702 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B R10 series General Purpose Dry Circuit to 7.5 Amp Multicontact AC or DC Relay * R10-E - Clear Dust Cover Version * R10-R - Sealed, Immersion Cleanable Type * R10S - Super Sensitive, Logic Compatible R10-R R10 File E29244 File LR15734 R10S Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Capacitance * Broad range of coil options provide sensitivity ranging from 25 to 750mW. * Various contacts switch from dry circuit to 7.5 amps. * Many mounting and termination options. Between Contacts: 2 pf, typ. Between Contacts and Coil: 2 pf, typ. Between Coil and Frame: 30 pf, typ. Initial Insulation Resistance Contact Materials, Styles & Ratings @ +25C Contact Code W X Y Z P Contact Material Contact Style Coil Codes Available Silver-Cadmium Oxide Single Button Silver-Cadmium Oxide Single Button Fine Silver Single Button Fine Silver Bifurcated Gold overlay on Silver Bifurcated Crossbar Contact Ratings Min. Typ. Max. V, Q, S, J 500mA 7.5A V, Q, S, J 500mA 5A All 100mA 2A 3A All 1mA 100mA 2A All Dry Circuit 1mA 3A Ratings are at 28VDC or 155VAC unless otherwise specified. Total load must not exceed 30A per relay. Use ungrounded frame for AC loads of 5A or greater. Max.ratings are 7.5A at 115VAC and 4A at 28VDC for coil codes S and J. Use ungrounded frame for AC loads of 5A or greater. Max.ratings are 5A at 115VAC and 3A at 28VDC for coil codes S and J. UL Horsepower Contact Ratings (Coil Code V Only) Contact Code W X No. of Poles 1, 2, 4 1, 2, 4, 6 At 110-120VAC 1/8 HP (3.8A) 1/20 HP (1.5A) At 220-240VAC 1/6 HP (2.2A) 1/10 HP (1.5A) Expected Mechanical Life: 100 million operations, typical. (Except contact Code W: 1,000,000 operations, typical.) Between Mutually Insulated Elements: 1010 ohms @ 25C, 50% RH. Consult factory for optional acetal resin material rated 1012 ohms. Coil Data @ 25C (also see Coil Data tables) Voltage: 3 to 115VDC and 6 to 115VAC. Maximum Coil Power: 2.2 Watts. Coil Temperature Rise: 30C per Watt. Maximum Coil Temperature: 105C. Operate Data @ 25C R10 Relays (DC Only) Typical Ranges of Operations (Curves for reference only. If specific values are required, testing is required.) Current Voltage 12 Typical Operate and Release Time 25 10 (all contact configurations) 20 8 6 15 Release Time (no suppression) 10 5 4 2 Operate Time 1.0 Typical Expected Life For Resistive Loads @ 25C Type 30 1.33 1.5 2.0 2.5 Release Time (Milliseconds) Arrangements: 1 Form C (SPDT) through 8 Form C (8PDT) See Ordering Information tables for more details regarding availability. Operate Time (Milliseconds) Contact Data @ 25C 3.0 Multiple of Max. Pull-In Voltage or Current Contact Style Coil Code Operations R10 7.5A 120VAC, 60 Hz. W V,S,J 7.5 * 104 R10 7.5A 28VDC W V 7.5 * 104 R10 5.0A 120VAC, 60 Hz. X V,S,J 5 * 104 R10 5.0A 28VDC X V 5 * 104 R10 4.0A 28VDC W S,J 2 * 104 R10 3.0A 28VDC X S,J 2 * 104 R10 3.0A 28VDC or 120VAC P V,S,J 3 * 104 R10 2.0A 28VDC P,Y,Z V 1.5 * 106 R10 2.0A 28VDC P,Y,Z S,J 6 * 105 R10S 2.0A 28VDC P,Y,Z J 5 * 105 R10 1.0A 28VDC P,Y,Z V,S,J 12 * 106 R10 1.0A 28VDC P,Y,Z SS,JJ 5 * 105 R10S 1.0A 28VDC P,Y,Z J 1 * 106 R10 500mA 28VDC P,Y,Z SS,JJ 5 * 106 R10 100mA 28VDC or 120VAC P,Y,Z V,S,J 1 * 108 R10 100mA 48VDC P,Z SS,JJ 5 * 106 R10 100mA 6VDC P SS,JJ 5 * 107 R10S 100mA 28VDC or 120VAC P,Y,Z J 1 * 106 R10 50mA 6VDC P,Z V,S,J 5 * 107 R10S 30mA 6VDC P,Z J 5 * 106 R10 1mA 6VDC P SS,JJ 5 * 107 Relay operated at rated coil voltage or 133% of pick-up current or higher. R10 Ultra-Sensitive "SS" and "JJ" Typical Ranges of Operation Initial Dielectric Strength Storage Temperature Range: -55C to +105C. Operating Temperature Range: -55C to +75C. Between Open Contacts: 500V rms, for contact codes P and Z. 1,000V rms for contact codes W, X and Y with coil code V. Between All Other Conductors: 1,000V rms. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. (Curves for reference only. If specific values are required, testing is required.) Operate Time (Milliseconds) Typical Operate and Release Times 40 8 (all contact configurations) 6 30 Release Time (no suppression) 20 10 Operate Time 1.0 1.5 2.0 3.0 4 2 Release Time (Milliseconds) 10 50 4.0 Multiple of Max. Pull-In Voltage or Current Environmental Data Mechanical Data Terminal Finish: Tin plating standard. Weight: 0.8 to 1.4 oz. (23 to 40g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 703 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Coil Data Tables @ 25C One of the boldface resistance or voltage values from a table below is to be inserted in step 6 of the ordering chart on the next page. V Standard DC Voltage Adjustment J Sensitive DC Current Adjustment 2.2 Watts Maximum Continuous Coil Dissipation @ 25C VDC at 25C Nominal 3.0 5.0 6.0 12.0 24.0 48.0 72.0 115.0 Pick-up (Max.) 2.25 3.75 4.5 9.0 18.0 36.0 54.0 86.0 Q Must Operate Current (mA) Coil Resistance at 25C 10% (ohms) 1, 2 & 4 Form 6 Form A, 8 Form A, A, B, C or D B or C B or C Pick-up Pick-up Pick-up 500mW 850mW 1000mW 10 6 5 28 16 14 52 25 20 185 90 72 700 430 350 2.5K 1.5K 1.25K 5.8K 3.5K 2.8K 15.0K 9.0K 8.0K All Applicable Types Except R10S Coil Resistance 10% (ohms) 2 Form A, B, C or D Pick-up 85mW 1.0K 2.5K 5.0K 10.0K 15.0K 30.0K 8.5 5.8 4.1 3.1 2.6 1.7 S 3 & 4 Form A, B, C or D Coil Res. Pick-Up @ 25C (Max.) Pick-Up 10% @ 25C @ 25C (ohms) (VDC) (mW) 32 3.8 450 52 4.2 340 185 8.4 380 1.0K 17.2 295 3.2K 31.1 300 7.5K 49.3 325 15.0K 67.5 300 Nominal Voltage @ 25C (VDC) 5 6 12 24 48 72 115 Sensitive DC Voltage Adjustment 2.2 Watts Maximum Continuous Coil Dissipation @ 25C Coil Resistance at 25C 10% (ohms) VDC at 25C 1 & 2 Form 3 & 4 Form A, 6 Form A, A, B, C or D B, C or D B or C Nominal Pick-up Pick-up Pick-up Pick-up (Max.) 100mW 175mW 250mW 3.0 2.25 50 30 20 5.0 3.75 140 80 56 6.0 4.5 200 110 80 12.0 9.0 800 450 320 24.0 18.0 3.2K 1.8K 1.2K 48.0 36.0 13.0K 7.5K 5.2K 72.0 54.0 28.0K 16.0 13.0K 115.0 86.0 50.0K 40.0K 30.0K 8 Form A, B or C Pick-up 400mW 12 35 52 200 800 3.2K 7.5K 16.0K 6 Form A, B, C or D Pick-up 250mW 13.0 16.0 8.4 10.0 6.2 7.2 4.5 5.0 3.5 4.2 2.5 2.9 R10S Types Only 8 Form A, B or C Pick-up 400mW Max. Coil Current (mA) 20.0 13.0 9.0 6.4 5.3 3.7 45.0 28.0 20.0 14.0 11.5 8.3 Coil Resistance 10% (ohms) 1 Form C Pick-up 10mW 2 Form C Pick-up 20mW 4 Form C Pick-up 40mW 500 1.0K 2.5K 5.0K 10.0K 16.0K 30.0K 4.5 (A) 3.2 (A) 2.0 1.4 (B) 1.0 0.8 0.6 (C) 6.3 (A) 4.5 2.9 (B) 2.0 1.4 (C) 1.2 0.8 9.0 6.5 4.1 (B) 2.9 (C) 2.0 1.4 1.2 Special DC Voltage Adjustment 1 & 2 Form A, B, C or D Coil Res. Pick-up @ 25C (Max.) Pick-up 10% @ 25C @ 25C (ohms) (VDC) (mW) 52 3.1 180 110 4.5 185 450 9.2 190 1.8K 17.4 170 7.5K 36.2 175 15.0K 49.5 165 30.0K 67.5 160 4 Form A, B, C or D Pick-up 175mW (A) Suggested for 5VDC operation. (B) Suggested for 12VDC operation. (C) Suggested for 24VDC operation. JJ Ultra-Sensitive Current Adjustment (1-4 Pole Only) Coil Resistance at 25C 10% 1.0K 2.5K 5.0K 10.0K 15.0K 30.0K 1 Form C Pick-Up Power 20mW 4.5 2.9 2.1 1.5 1.2 0.85 Maximum Pick-Up Current (mA) 2 Form C 3 & 4 Form C Pick-Up Pick-Up Power Power 40mW 80mW 6.5 9.0 4.1 5.8 2.9 4.1 2.0 3.0 1.7 2.4 1.2 1.7 Maximum Continuous Coil Current (mA) 45.0 28.0 20.0 14.0 11.5 8.3 Standard AC Operated Relays Coil Resistance @ 25C 20% (ohms) 2 & 4 Form C 25 120 500 2.0K 9.0K Volts AC @ 25C 6 & 8 Form C 15 90 350 1.4K 7.5K Pick-Up (max.) 5.0 9.0 18.0 36.0 86.0 Nominal 6 12 24 48 115 Maximum Continuous 7.2 14.5 30.0 60.0 130.0 Note: Dual coil diode rectified construction. Typical Coil Inductance 500 Ultra-Sensitive Voltage Adjustment (1-4 Pole Only) 2.2 Watts Maximum Continuous Coil Dissipation @ 25C VDC at 25C Nominal 3.0 5.0 6.0 12.0 18.0 24.0 36.0 48.0 Pick-up (Max.) 2.25 3.75 4.5 9.0 13.5 18.0 27.0 36.0 Coil Resistance at 25C 10% (ohms) 1 Form C 2 Form C 3 & 4 Form C, Pick-up Pick-up Pick-up Power Power Power 20mW 40mW 80mW 220 110 52 700 350 175 1.0K 500 250 4.0K 2.0K 1.0K 9.0K 4.5K 2.2K 15.0K 7.5K 3.7K 30.0K 15.0K 7.5K -- 30.0K 15.0K Coil Inductance (Henrys) SS 100 50 10 Armature (open) Armature (closed) 1.0 0.5 0.1 10 50 100 500 1K 5K 10K 100K Coil Resistance (Ohms) Dimensions are shown for 704 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B R10 -E 1 Y 4 -V700 1. Basic Series: R10 = Relay with Form C contacts. R10S = Super sensitive R10 (case and terminals E1 & E2 only, J coil adj. only). 2. Case Style: E = Non-sealed polycarbonate cover. R = Immersion cleanable, tape sealed plastic case (R10 only [Form C], terminal code 2 & 9 only [std. PCB]). No ground or stud included. Not available on R10S. 3. Terminals & Mounting: 1 = Solder/plug-in terminals with #3-48 mounting stud. 2 = Printed circuit terminals (std.) .064" (1.62mm) clearance, 1.25" (31.75mm) seated ht. 6 = Side mounting plate with #6-32 stud, solder/plug-in terminals (#3-48 stud not included). 7 = Narrow (.04" [1.02mm] wide) printed circuit terminals .013" (.33mm) clearance, 1.2" (30.48mm) seated ht. 9 = Non-shouldered, narrow (.04" [1.02mm] wide) printed circuit terminals in a staggered arrangement (1 to 6 poles only). 4. Contact Style & Rating: W X Y Z P Single Contact Single Contact Single Contact Bifurcated, Low Bifurcated Crossbar, Level Contacts Dry Circuit Contacts Typ. 2A Max. 3A Min. 100mA Typ. 100mA Max. 2A Min. 1mA Typ. 1mA Max. 3A Min. Dry Circuit X X X X X X V, Q, S & J Coil Adjustment Only Max. 7.5A Min. 500mA Max. 5A Min. 500mA X X R10 R10S Ratings are at 28VDC or 115VAC. Total load must not exceed 30A per relay. Use ungrounded frame for AC loads of 5A or greater. Max. ratings are 7.5A at 115VAC and 4A at 28VDC for coil codes S & J. Use ungrounded frame for AC loads of 5A or greater. Max. ratings are 5A at 115VAC and 3A at 28VDC for coil codes S & J. 5. Number of Poles: 1 = 1 pole. 2 = 2 pole. 3 = 3 pole. 4 = 4 pole 6 = 6 pole (not available with W contacts). 8 = 8 pole (available on case style E only; not available with W contacts). 6. Coil (Refer to Coil Data Tables): AC Voltage (available on R10 only) Specify nominal coil voltage followed by V (example: 24V). DC Voltage Specify coil adjustment code letter followed by coil resistance (example: V700). Our authorized distributors are more likely to stock the following items for immediate delivery. R10-E1P2-115V R10-E1P2-V700 R10-E1P4-115V R10-E1P4-V700 R10-E1W2-V185 R10-E1W2-V700 R10-E1W4-V185 R10-E1W4-V700 R10-E1X2-115V Dimensions are shown for reference purposes only. R10-E1X2-24V R10-E1X2-S800 R10-E1X2-V185 R10-E1X2-V700 R10-E1X4-115V R10-E1X4-V185 R10-E1X4-V2.5K R10-E1X4-V700 R10-E1X6-V430 R10-E1Y2-J1.0K R10-E1Y2-J2.5K R10-E1Y2-V15.0K R10-E1Y2-V185 R10-E1Y2-V2.5K R10-E1Y2-V700 R10-E1Y4-J10.0K R10-E1Y4-V2.5K R10-E1Y4-V52 Dimensions are in inches over (millimeters) unless otherwise specified. R10-E1Y4-V700 R10-E1Y6-V1.5K R10-E1Z2-V185 R10-E1Z2-V700 R10-E1Z4-V185 R10-E1Z4-V2.5K R10-E1Z4-V700 R10-E1Z6-V1.5K R10-E1Z6-V430 R10-E2P4-V185 R10-E2P4-V700 R10-E2W2-V185 R10-E2X2-V185 R10-E2X2-V700 R10-E2X4-V185 R10-E2X4-V700 R10-E2Y2-V185 R10-E2Y2-V700 Specifications and availability subject to change. R10-E2Y4-V185 R10-E2Y4-V700 R10S-E1Y2-J5.0K R10S-E2Y1-J1.0K www.tycoelectronics.com Technical support: 705 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions 1.187 MAX. (30.15) R10S: 1.50 MAX. (38.1) .735 MAX. (18.67) .406 (10.31) 2 POLE .950 MAX. (24.13, 2 POLE 1R10) 4 POLE 1.165 MAX. (29.59, 4 POLE 1R10) 6 POLE 1.375 MAX. (34.93) 8 POLE 1.580 MAX. (40.13) .085 MAX. (2.16) .135 (3.43) .171 (4.43) .354 (8.99) 3-48 THREAD NIB .091 DIA. x .020 HIGH (2.31) (.51) CASE R ONLY Recommend tape tab be removed after immersion cleaning and before relay is put in service. Peel off to permit proper relay ventilation. CASE E ONLY TYPE E6 ONLY .210 (5.33) } TYPE E1 ONLY .375 (9.53) #6-32 THREAD .156 (3.96) TYPE E6 ONLY .59 REF. (15.0) STUD ON NARROW SIDE ONLY .437 (11.10) PC Terminal Dimensions A Solder Terminal Dimensions .090 (2.29) .040 (1.02) B C D .131 .050 .064 1.251 Inline Type 7 .131 .040 .013 Inline Type 9 .170 .040 .000 1.187 Staggered Thickness .012 012 .012 .012 (.30) .080 (2.03) Arrang. Type 2 1.20 .013 --- B C A D (TO TOP OF CASE) Wiring Diagrams (Bottom Views) R10 Wiring Diagrams R10-AC Wiring Diagram 6 7 8 9 5 4 3 2 1 POLE 1 10 6 8 7 9 4 3 5 2 9 10 16 9 12 11 23 24 11 9 10 22 9 10 18 6 8 7 20 21 8 19 17 6 18 7 5 8 14 15 8 7 13 6 7 17 16 11 12 5 11 12 5 14 2 POLE 1 3 POLE 4 3 2 13 21 6 2 14 12 20 15 3 27 25 19 14 4 26 10 13 1 13 1 15 4 3 5 2 1 4 6 POLE 4 POLE .530 .420 (13.46) (10.67) .450 (11.43) Dimensions are shown for 706 reference purposes only. .740 (18.80) .100 (2.54) GRID .630 (16.00) Suggested Panel Cutout For Relay or Socket + .13 6 POLE 4 2 POLE POLE .500 (12.70) HOLES + .004 DIA. - .000 + .10 1.42 - .00 .056 ( 1 2 HOLES .010 + .005 .109 - .000 DIA. TOLERANCE: ( .25) .500 (12.70) .210 (5.33) .400 .550 (10.16) (13.97) 2 Terminal Types E9 & R9 Terminal Types E2 & R2 .110 (2.79) 3 DUAL COIL 8 POLE Suggested PC Board Layouts (Component Side of Boards) .320 (8.13) 16 10 16 22 15 28 ) HOLES + .004 DIA. .056 - .000 + .10 1.42 - .00 ( ) .450 (11.43) Dimensions are in inches over (millimeters) unless otherwise specified. .150 (3.81) .100 (2.54) ( 2.77 - .00 ) .281 (7.14) .656 .015 (16.66 .38) .187 .0 02 DIA. (4.75 .05) X .354 (8.99) .140 (3.56) .281 .015 (7.14 .38) X = 2 POLE - .343 .020 (8.71 .51) 4 POLE - .562 .020 (14.27 .51) 6 POLE - .781 .020 (19.84 .51) 8 POLE - 1.000 .020 (25.40 .51) Specifications and availability subject to change. Mounting Hole Layout For Terminal & Mounting Style 6 .437 (11.10) .147 .0 02 DIA. (3.73 .05) www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B R10 Socket & Accessory Information Ordering Data - Stock items are boldfaced. Socket Part No. No. of Poles Type of Terminal Grounding Provision All tolerances .010 (.25) unless otherwise noted. Suggested Panel Cutout 27E125 27E126 27E127 27E162 27E163 27E164 Socket Specifications Contact Material: Spring brass, tin-plated. Body Material: 2 and 4 pole: polyester. 6 and 8 pole: phenolic. Voltage Drop: 30mV max. @ 10A. Dielectric Strength: 1,000V rms. Insulation Resistance: 109 megohms. Max. Current: 10A. Rugged, molded socket body retains floating terminals of either solder or printed circuit pin configuration. PC terminal sockets are offered with pins in either 0.1" (2.54mm) grid or in-line arrangement. Grounding Provisions Pre-installed on sockets Not for use at 5A AC and above. Grounding Strip: Mounting stud of relay contacts grounding strip. Grounding strip is grounded with screw or rivet through round hole in socket. Grounding Terminal (PC sockets only): Mounting stud of relay contacts ground terminal through square hole in socket. Terminal Caution: Printed circuit sockets are manufactured with "floating" (loose) terminals. This permits them to align with holes in the circuit board and with the relay terminals. During the mounting and soldering of the socket, vertical float should be eliminated and the terminals seated on the board. (This may be accomplished by inserting a dummy relay in the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of the copper conductor from the printed circuit board when a relay is inserted in the socket after soldering. 27E128 27E129 27E130 27E254 27E212 27E213 27E271 27E258 27E193 27E194 2 4 6 8 2 4 6 8 2 4 27E636 27E637 2 4 27E631 27E632 27E340 27E342 27E629 27E630 27E338 2 4 6 2 4 6 4 PC In-line .180" long (4.57mm) Strip Strip Strip None None None Terminal 27E633 27E634 27E635 2 4 6 PC In-line .210" long (5.33mm) Strip Strip Strip .175 (4.45) .032 (.81) .330 (8.38) .235 (5.97) .312 (7.92) .519 4 POLE (13.18) .725 6 POLE (18.42) .931 8 POLE (23.65) .281 (7.14) + .140 (3.56) Strip Strip .500 (12.70) .065 (1.65) .090 (2.29) .625 (15.88) 6 POLE .100 (2.54) GRID 4 POLE .500 (12.70) HOLES + .004 DIA. - .000 + .10 1.42 - .00 ( 8 POLE 2 POLE .100 .150 (2.54) (3.81 .450 ) HOLE FOR GROUND (11.43) TERMINAL (IF REQ'D.) .056 ) Suggested Board Layout (Component Side) .400 (10.16) .110 (2.79) .420 .530 (10.16) (13.46) .320 (8.13) .450 .550 (11.43) (13.97) + .004 .056 - .000 + .10 1.42 - .00 .450 (11.43) DIA. HOLES .210 (5.33) .050 DIA. (1.27) .150 1 HOLE (3.81) ( Hold Down Spring ) Hold Down Strap (PC Sockets Only) See following page for additional sockets & accessories. 37D645 - Mounting Strip Strip of .060" (1.52mm) aluminum contains ten pre-punched, breakaway mounting plates. Each plate accomodates a 2, 4, 6 or 8 pole solder terminal R10 relay or socket to facilitate chassis- or rack mounting. 1.205 .535 (13.59) .25 (6.4) B .281 .015 (7.14 .38) .354 (8.99) Suggested Board Layout (Component Side) .210 (5.33) A 2 HOLES .109 DIA. (2.77) + .13 (3.3) 1.205 (30.61) (30.61) .090 R. (2.29) "A" = .109 DIA. (2.77) 2.000 (50.80) .045 x .090 (1.14 x 2.28) 2.50 (63.5) "A" + +"A" + + .090 (2.29) CLEARANCE HOLE FOR RELAY MNTG. STUD & GROUNDING SPRING 2 POLE Dimensions are shown for reference purposes only. PC Stag. .210" long (5.33mm) 2 POLE .343 (8.71) 4 POLE .562 (14.27) 6 POLE .781 (19.84) 8 POLE 1.000 (25.40) 20C249 2 Wire Hold Down Spring 20C250 4 Wire Hold Down Spring 20C251 6 Wire Hold Down Spring 20C266 8 Wire Hold Down Spring 20C259 All Wire Hold Down Strap (PC only) 20C300 2 (R10S) Hold Down Spring 20C301 4 (R10S) Hold Down Spring .750 (19.05) .350 (8.89) PC Stag. .180" long (4.57mm) Strip Strip Strip Strip None None None None Terminal Terminal Hold Downs For Use With R10 Sockets Part No. No. of Poles Description Solder & PC Terminal Socket Outline Dimensions 2 POLE .978 (24.84) 4 POLE 1.184 (30.07) 6 POLE 1.390 (35.31) 8 POLE 1.546 (40.54) Solder Strip Strip Strip None None None .656 .015 (16.66 .38) Solder or PC Terminal Sockets Strip 2 4 6 2 4 6 .165 (4.19) PC Socket Dim. A Dim. B Term. Length .180" .180 .115 (4.57) (2.92) .120 DIA. HOLE .210" .210 .156 (3.05) (5.33) (3.96) .010 TOLERANCES ( .25 ) UNLESS OTHERWISE SHOWN Dimensions are in inches over (millimeters) unless otherwise specified. 1.135 (28.83) .32 (8.1) Specifications and availability subject to change. .180 (4.57) .16 (4.1) www.tycoelectronics.com Technical support: 707 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B R10 Socket & Accessory Information (Continued) Ordering Data - Stock items are boldfaced. Socket Part No. No. of Poles Type of Terminal Grounding Provision X= 2 POLE .978 (24.84) 4 POLE 1.184 (30.07) 2 4 27E317 27E152 Solder/ Bracket .85 MAX. (21.6) Strip Strip X .075 (1.91) .210 TYP. (5.33) .437 (11.10) .150 (3.81) .484 (12.29) + Bracket Mount Socket .045 x .090 TYP. (1.14 x 2.28) Allows solder terminal relay to mount flat on a chassis. .156 (3.96) .437 (11.10) TAPPED #6-32 THREAD Socket Part No. No. of Poles Dim. A Nom. Dim. B Max. .780 MAX. (19.81) Dim. C Min. .175 REF. (4.45) 2 1.437 (36.50) 1.822 (46.27) .937 (23.80) 27E447 4 1.687 (42.85) 2.072 (52.63) 1.125 (28.58) A B Flange Mount Socket Solder terminal socket with tin-plated terminals and grounding strip preassembled on .065" (1.65mm) steel mounting plate. Requires only one chassis cutout. 27E448 6 1.875 (47.63) 2.260 (57.40) 1.343 (34.11) Part No. No. of Poles Dim. A Nom. Dim. B Max. Dim. C Nom. 27E460 2 1.800 (45.72) 2.230 (56.64) .200 (5.08) 4 27E461 Track Mount Socket Provides front wiring, screw terminal connections for R10 family relays. No grounding provision. 6 27E462 2.125 (53.98) 2.830 (71.88) .337 (8.56) 2.812 (71.42) 3.830 (97.28) .494 (12.55) 2 MTG. HOLES .147 DIA. (3.73) 27EXXX PC BOARD 24A110 40G432 1.375 TRACK INSULATOR (34.93) 1.12L x .41W x .26H 24A071 (28.4 x 10.4 x 6.60) MOUNTING CLIP Dimensions are shown for 708 reference purposes only. Suggested Chassis Mounting .187 MIN. (4.75) 27EXXX PC BOARD .320 REF. (8.13) .187 .010 (4.75 .25) .687 (17.45) C .25 (6.35) 2 Pole Terminal Wiring Code (2) MTNG. HOLES .187 DIA. (4.75) 6 7 5 1 2 + + ++ + ++ + ++ + ++ #6-32 SCREWS 10 8 9 4 3 A .100 (2.54) B .062 .0 07 (1.57 .178) + 2.75 .015 (69.85 .381) C 1.375 .010 (34.93 .254) 4 Pole Terminal Wiring Code Suggested Track Mounting 2 HOLES .147 DIA. (3.73) .210 (5.33) See preceding page for hold down springs. .187 MIN. (4.75) .045 x .090 (1.14 x 2.28) SLOT IN TERMINALS SUGG CHASSIS CUTOUT .065 (1.65) 27E446 .058 (1.47) MATERIAL THICKNESS 9 10 8 7 5 6 1 2 + 15 16 14 13 + + + 11 12 4 + 3 +++ +++ +++ +++ .530 MAX. (13.46) 6 Pole Terminal Wiring Code 9 12 + 13 21 11 22 10 + ++ 20 + ++ 19 8 + ++ ++ 7 + + ++ 17 5 16 + ++ 6 14 18 15 1 + 4 2 3 CHASSIS SUGGESTED STANDOFF (CUSTOMER SUPPLIED) OR INSULATOR (40G432) .375 (9.53) DIA. MIN; .625 (15.88) DIA. MAX. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KHA series General Purpose Dry Circuit to 5A Multicontact AC or DC Relay File E22575 File LR15734 KHS Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. KHAU Coil Data @ 25C Features * Miniature size from 2 pole to 4 pole. * KHAU is produced on an automated line, while KHU is produced manually. Form, fit and function of the two versions are identical. * KHS hermetically sealed version UL Approved for Class 1 Division 2 hazardous locations. * Various applications include process control, photocopier, and data processing. * Push-to-test and indicator options available. * Various contact materials available for specific load requirements. Voltage: From 6 to 120VDC, and 6 to 240VAC, 50/60 Hz. Nom. Power: DC coils - 0.9 watt; 0.5 watt minimum operate @ 25C. AC coils - 1.2 VA; 0.55 VA minimum operate @ 25C. Max. Power: DC coils - 2.0 watts @ 25C. Duty Cycle: Continuous. Initial Breakdown Voltage: 500V rms, 60 Hz. Coil Data DC Coils Nominal Voltage Resistance in Ohms 10% @ 250C 5 6 12 24 48 110 * 120 * 240 32 40 160 650 2,600 11,000 -- -- Contact Data @ 25C Arrangements: 2 Form C (DPDT), 4 Form C (4PDT). Expected Life: 10 million operations, mechanical; 100,000 operations min. at rated loads. Ratings are based on tests of relays with ungrounded frames. Initial Breakdown Voltage: 500V rms, 60 Hz., between open contacts. 1240V rms, 60 Hz., between all other elements. AC Coils Nominal Inductance in Henrys .072 .08 .28 1.0 4.5 17.0 -- -- Resistance in Ohms 15% Nominal AC Current in mA -- 10.5 43 160 668 -- 3,900 12,000 -- 200 100 52 25 -- 11.0 6.0 *Note: For 220 and 240VDC, use series dropping 5W resistor of 11,000. Contact Ratings Contact Code Resistive Rating Material Minimum Maximum 1 Silver 100mA @ 12VAC/12VDC 3A @ 120VAC/28VDC 2* Silver-cadmium oxide 500mA @ 12VAC/12VDC 5A @ 120VAC/28VDC 3 Gold-silver-nickel 10mA @ 12VAC/12VDC 2A @ 120VAC/28VDC 6 Bifurcated cross bar, gold overlay silver Dry circuit 1A @ 120VAC/28VDC 8 Gold diffused silver 50mA @ 12VAC/12VDC 3A @ 120VAC/28VDC Operate Data @ 25C Must-Operate Voltage: DC: 75% of nominal voltage. AC: 85% of nominal voltage. Operate Time: 13 milliseconds typical @ nominal voltage (excluding bounce). Release Time: 6 milliseconds typical @ nominal voltage (excluding bounce). Environmental Data Temperature Range: -45C to +70C operate. -60C to +130C storage. Note: Relays should only carry a maximum of 15 amps continuously for all poles combined. Mechanical Data KHS Contact Ratings Class I Division II Hazardous Location: 5A@28VDC/120VAC UL 508 (Industrial Control): 3A@28VDC/120VAC; 1/10 HP @ 120VAC. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mountings: #3-48 stud, sockets with printed circuit or solder terminals, or bracket plate with #6-32 threaded stud. Termination: Printed circuit or solder/socket terminals. Printed circuit terminals are available for KHS on a special order basis. Enclosures: See Ordering Information table. Weight: 1.6 oz. approx. (45g). Specifications and availability subject to change. www.tycoelectronics.com Technical support: 709 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B KHA U -17 A 1 1 B -24 1. Basic Series: (See Note 1) 2. Type: E = Printed circuit terminals, nylon dust cover, contacts rated opposite polarity (UL & CSA). S = Solder terminals, hermetically sealed steel case (UL & CSA). Note: Do not ground KHS frame without consulting factory for load levels. (Order as KHS, not KHAS.) U = Solder terminals, clear polycarbonate dust cover, contacts rated same polarity (UL & CSA). 3. Contact Arrangement: 11 = 2 Form C (DPDT) 17 = 4 Form C (4PDT) 4. Operating Coil: A = AC D = DC 5. Mounting and Termination: 1 = Socket mount, solder terminals on S, U types; printed circuit terminals on E types. 6. Contact Material: Relay Type Available Codes E S U 1, 2, 3, 6, 8 1*, 2*, 3 1, 2, 6, 8 *UL Rated 1/10 HP, 3A, 120VAC when used with mounting & termination 1. 1 = Silver. 2 = Silver-cadmium oxide. 3 = Gold-silver-nickel. 6 = Bifurcated crossbar, gold overlay silver. 8 = Gold diffused silver. 7. Options Available: Relay Type E S Available Codes B (DPDT only) None U N B H L M B = Push to test button. N = Neon indicator. Only available with 120VAC or 110VDC coils. Not available with mounting & termination 4 or 8. H = Neon indicator and push to test button. Only available with 120VAC or DC coils. Not available with mounting & termination 4 or 8. L = LED indicator. Only available with 6-48VAC or DC coils. M = LED indicator and push-to-test button. Only available with 6-48VAC or DC coils. 8. Coil Voltage: 6, 12, 24, 48, 120, 240**VAC 6, 12, 24, 48, 110VDC **240VAC coil is not available on KHS type relays. Note 1: Some KHA models available in KH construction. Specify KH instead of KHA. Stock Items - Our authorized distributors are likely to stock the following items. KHAE-17D12-24 KHAU-11A11-120 KHAU-11D11-24 KHAU-17A11-12 KHAU-17A11-24 KHAU-17A11-120 KHAU-17A11N-120 KHAU-17A12-120 KHAU-17A13-120 KHAU-17A16-24 KHAU-17A16-120 KHAU-17A18-120 KHAU-17D11-6 KHAU-17D11-12 Dimensions are shown for 710 reference purposes only. KHAU-17D11-24 KHAU-17D11-48 KHAU-17D11-110 KHAU-17D12-12 KHAU-17D12-24 KHAU-17D12-48 KHAU-17D12-110 KHAU-17D16-12 KHAU-17D16-24 KHS-17A11-24 KHS-17A11-120 KHS-17A12-120 KHS-17D11-12 KHS-17D11-24 Dimensions are in inches over (millimeters) unless otherwise specified. KHS-17D11-48 KHS-17D11-110 KHS-17D12-12 KHS-17D12-24 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Mounting Code 1 - KHAU only. Mounting Code 1 - KHS only. 2 & 4 Pole 2 & 4 Pole .859 MAX. (21.82) .750 (19.05) .25 (6.4) 1 2 3 5 6 7 #3-48 THREAD .022 (.56) 4 8 .265 (6.73) .312 (7.92) .022 REF (.56) 9 10 11 12 1.109 MAX. (28.17) .168 (4.27) .000 - .010 (.00 - .25) 1.281 MAX. (32.54) .263 (6.68) .525 (13.34) 1.281 MAX. (32.54) .421 (10.69) .312 + .031 (7.92 .79) .263 REF. (6.68) .281 REF. (7.14) .525 REF. (13.34) Class 1 Div. 2 Group A, B, C & D Hazards Mounting Code 1 - Neon Indicator, Push-To-Test. .250 (6.35) .313 (7.95) .022 .015 (.56 .38) .040 .010 (1.02 .25) 1.281 MAX. (32.54) 1.600 MAX WITH INDICATOR LAMP (38.10) .859 MAX. (21.82) .750 (19.05) .312 .031 (7.92 .79) 1 2 3 5 6 7 4 8 9 10 11 12 .263 (6.68) .180 DIA. BOSSES (4.57) Printed Circuit Terminals .168 020 (4.27 .51) .168 (4.27) 1.109 MAX. (28.17) .797 .020 (20.24 .51) #3-48 THREAD .265 .046 (6.73 1.17) .219 (5.56) .45 REF. (11.4) 1.156 MAX. (29.36) #3-48 THREAD PC terminal models have rivet, not stud. Max. seated height in 27E006 socket is 1.37" (34.8mm). .125 DIA. (3.18) .910 MAX. (23.11) .250 + .015 (6.35 .38) .421 .046 (10.69 1.17) .525 (13.34) .052 REF. (1.32) .047 REF. (1.19) .112 (2.84) .15 (3.81) Printed circuit terminal thickness .022 (.558) .200 (5.08) terminal length available on special order Wiring Diagrams (Bottom Views) 2 Pole 1 5 9 4 Pole 1 5 9 4 8 12 13 + 14 - 2 6 10 3 7 11 4 8 12 13 14 + - + = Polarity for LED indicator. PC Board Layout (Bottom View) .160 (4.06) .410 (10.41) .660 (16.76) 14 PLACES .070 DIA. (1.78) .175 (4.45) .525 (13.34) Dimensions are shown for reference purposes only. For KHAE Relays with PC terminals and sockets with PC terminals .350 (8.89) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 711 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Sockets For KHA And KHS Series Boldface sockets are normally maintained in stock for immediate delivery. 4-Pole Socket For KHAU, KHAX, KHS, KHU Relays. Relays with solder terminals are required for use with sockets. .068 (1.73) Socket Description Industrial Part No. No. of Poles Terminal and Length Grounding Provision Socket Material 27E006* 4 Yes Nylon 27E007* 4 Yes Nylon 27E023* 27E220* 27E166** 4 2 4 Solder .375" (9.53mm) P.C. .218" (5.54mm) P.C. .218" (5.54mm) Screw No Nylon Yes 27E894** 4 Screw No Glass-filled Polyester Glass-filled Polyester 1.150 (29.21) .850 (21.59) 1.07 (2.72) .012 (0.30) .310 (7.87) .440 (11.18) Recommended Chassis Cutouts For Mounting Sockets Relay Hold Down Spring Relay Hold Down Spring - use with 27E166 Relay Hold Down Spring - use with 27E894 20C217 20C297 20C426 .183 (4.65) .858 (21.79) * UL Recognized, file E22575 ** UL Recognized, file E59244 Recommended Chassis Thickness .031 (.79) to .062 (1.57) Pierced Solder Terminals 1.015 (25.78) Mounting Strip 37D633 .629 (15.98) .25 (6.4) .125 .010 (3.18 0.25) 1.388 (35.26) .090 R. (2.29) .617 (15.67) With Grounding Lug .171 (4.34) .090 (2.29) .052 .010 (1.32 0.25) .429 (10.90) Socket punch Greenlee part 5015115.0, Type 731R available from Greenlee Tool Co., Rockford, Illinois. (4-pole) Printed Circuit Terminals 1.750 (44.45) 1.015 (25.78) GROUND LUG .105 (2.67) 1.323 (33.60) 1.388 (35.26) .218 .016 (5.54 0.41) .16 .180 (4.1) (4.57) .065 .32 (1.65) (8.1) .858 (21.79) .13 (3.3) .061 (1.55) GROUND LUG Without Grounding Lug 37D633 will mount eight solder terminal sockets in one length of aluminum strip measuring 10.97" x 2.25" x .062 (278.6 x 57.15 x 1.57) Screw Terminal Socket 27E166 Relays with solder terminals are required for use with screw terminal sockets. .47 (11.93) .94 .800 MAX. (23.88) (20.32) .210 TYP. (5.33) 1.22 MAX. (30.99) .118 (3.00) 1.024 (26.01) 4 14 7 6 3 2 G 5 .728 (18.49) Hold Down Spring 20C217 8 7 43 6 5 21 14 13 1 13 12 11 10 12 9 11 10 9 Top View Top View Dimensions are shown for .984 (24.99) Caution: Printed circuit sockets are manufactured with "floating" (Loose) terminals. This permits them to align with holes in the circuit board and with the relay terminals. During the mounting and soldering of the socket, vertical float should be eliminated and the terminals seated on the board. (This may be accomplished by inserting a dummy relay in the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of the copper conductor from the printed circuit board when a relay is inserted in the socket after soldering. 27E894 Terminal Location 27E166 Terminal Location 8 712 reference purposes only. M3 SCREWS & CAPTIVE WASHERS .709 (18.01) 1.771 (44.98) 2.441 (62.00) # 4-40 SCREWS & CAPTIVE WASHERS .600 (15.24) .236 (5.99) .165 (4.19) 1.18 (30.0) .140 TYP. (3.56) .061 (1.55) (Use with mounting track 24A110) .446 REF. (11.33) 2.363 MAX. (60.02) .218 .016 (5.54 0.41) Screw Terminal DIN Rail, Snap-Mount Socket 27E894 1.181 (30.00) .171 (4.34) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCL/PCLH series 3A, 5A, 10A, 15A General Purpose Miniature Relay Factory Automation, Process Controls, Electrical Panels, etc. UL File No. E58304 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data@ 20C * Small size, 3A, 5A, 10A and 15A switching capacity. * Meets UL and CSA requirements. * 1 pole, 2 poles and 4 poles contact arrangements. * AC and DC coils with UL Class F (155C) coil insulation system standard. * Optional flange mount case. * Plug-in terminals or PCB terminals. Contact Data @ 20C Arrangements: 1 Form A (SPST-NO), 1 Form C (SPDT), 2 Form A (DPST-NO), 2 Form C (DPDT), 4 Form A (4PST-NO), 4 Form C (4PDT). Material: Ag, Ag Alloy. Max.Switching Rate: 300ops./min.(Mechanical). 30ops./min.(Electrical). Expected Mechanical Life: 100 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 50milliohms @ DC6V,1A. Contact Ratings PCL-4 3A @ AC250V/DC24V resistive. PCL-2 5A @ AC250V/DC24V resistive. PCLH-2 15A @ AC120V resistive. 10A @ AC250V/DC24V resistive. PCLH-1 15A @ AC250V/DC24V resistive. Max. Switched Current: PCL-4 3A. PCL-2 5A. PCLH-2 15A. PCLH-1 15A. Max. Switched Power: PCL-4 660VA, 72W. PCL-2 1,100VA, 120W. PCLH-2 3,168VA, 240W. PCLH-1 3,300VA, 360W. Ratings: Initial Dielectric Strength Between Open Contacts: 1,000VAC 1minute. Between Adjacent Contact Terminals: 1,500VAC 1minute. Between Contacts and Coil: 2,000VAC 1minute. Surge Voltage (Coil-Contact): 3,000V(1.2/50s). Initial Insulation Resistance Between Open Contacts: 1,000Mohms @ 500VDC. Between Adjacent Contact Terminals: 1,000Mohms @ 500VDC. Between Contacts and Coil: 1,000Mohms @ 500VDC. Coil Data Voltage: AC 6 - 240V. DC 6 - 110V. Nominal Power: AC abt. 1.4VA/1.2VA (50Hz/60Hz). DC abt. 0.9W. Coil Temperature Rise: AC 60C max. DC 50C max. Max. Coil Power: 110% of nominal voltage. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Rated Coil Voltage (VAC) 6 12 24 48 100 110/120 200 220/240 PCL AC Coil Must Operate Must Release Coil Voltage Resistance Voltage (VAC) (ohms)10% (VAC) 10 40 160 600 2,800 3,400 11,000 13,600 80% max. Nominal Coil Power (VA) 30% min. abt. 1.4 Must Release Voltage (VDC) Nominal Coil Power (W) PCL DC Coil Rated Coil Voltage (VDC) 6 12 24 48 100/110 Coil Must Operate Resistance Voltage (ohms)10% (VDC) 40 160 650 2,600 11,000 abt. 0.9 80% max. 10% min. abt. 1.1 Operate Data @ 20C Must Operate Voltage: AC 80% of nominal voltage or less. DC 80% of nominal voltage or less. Must Release Voltage: AC 30% of nominal voltage or more. DC 10% of nominal voltage or more. Operate Time: AC 20ms max. DC 15ms max. Release Time: AC 20ms max. DC 8ms max. Environmental Data Temperature Range: Operating: -10C to +55C. Humidity: 45 to 85%. (Non-condensing). Vibration, Operational: 10 to 55Hz 1.0mm double amplitude. Mechanical: 10 to 55Hz 1.0mm double amplitude. Shock, Operational: 100m/s2 (abt. 10G). Mechanical: 1,000m/s2 (abt. 100G). Mechanical Data Termination: Plug-in, PCB. Enclosure: Snap-on cover. Weight: 1.26 oz (32g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 713 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number PCL -2 02A 1 S ,000 1. Basic Series: PCL = 3A, 5A type PCLH = 10A,15A type 2. Number of Poles: 1 = 1 pole (PCLH only) 2 = 2 pole 4 = 4 pole (PCL only) 3. Coil Voltage: 01A=6VAC 05A=100VAC 01D=6VDC 02A=12VAC 06A=110/120VAC 02D=12VDC 03A=24VAC 07A=200VAC 03D=24VDC 04A=48VAC 08A=220/240VAC 04D=48VDC 05D=100/110VDC 4. Contact Material: Blank = Ag (only available on 4 pole model) 1 = Ag Alloy (available with all versions) 5. Contact Arrangement: Blank = Form C M = Form A 6. Case Type: S = Standard (Smoke color) F = Flange mount (Smoke color) 7. Terminal Type: Blank = Plug-in P = PCB 8. Indicator Lamp: Blank = None L = Indicator Lamp 9. Option: ,000 = Standard model Other suffix = Custom model. Our authorized distributors are more likely to stock the following items for immediate delivery. PCLH-202A1S,000 PCLH-203A1S,000 PCLH-206A1S,000 PCLH-208A1S,000 PCLH-202D1S,000 PCLH-203D1S,000 PCLH-204D1S,000 PCLH-205D1S,000 PCLH-206A1SP,000 PCLH-202D1SP,000 PCLH-203D1SP,000 PCLH-205D1SP,000 Outline Dimsisions PCL 2c, 2a type (Plug-in Terminal) PCL 2c, 2a type (PCB Terminal) 1.32 .02 (33.6 .5) 1.32 .02 (33.6 .5) .157 .008 (4.0 .2) .02 (.5) .02 (.5) .02 (.5) .02 (.5) .197 .012 (5.0 .3) .059 (1.5) .059 (1.5) .02 (.5) .02 (.5) .02 (.5) .02 (.5) .22 .012 (5.6 .3) 1.08 .02 (27.5 .5) .157 .008 (4.0 .2) .098 (2.5) .098 (2.5) NOT PRESENT ON FORM A MODEL 1.08 .02 (27.5 .5) .157 .008 (4.0 .2) .520 .008 (13.2 .2) .25 (6.35) .498 .248 (12.65) (6.3) .659 (16.75) .25 (6.35) .498 .248 (12.65) (6.3) .659 (16.75) Dimensions are shown for 714 reference purposes only. .835 .02 .520 .008 (21.2 .5) (13.2 .2) .835 .02 (21.2 .5) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Outline Dimensions (continued) PCL 4c, 4a type (Plug-in Terminal) PCL 4c, 4a type (PCB Terminal) 1.32 .02 (33.6 .5) 1.32 .02 (33.6 .5) .157 .008 (4.0 .2) .02 (.5) .02 (.5) .02 (.5) 1.08 .02 (27.5 .5) .039 .039 .197 .012 (1.0) (1.0) .02 (5.0 .3) .039 .039 (.5) (1.0) (1.0) NOT PRESENT ON FORM A MODEL .157 .008 (4.0 .2) .157 .008 (4.0 .2) .02 (.5) .02 (.5) .02 (.5) 1.08 .02 (27.5 .5) .02 (.5) .22 .012 (5.6 .3) .096 (2.45) .096 .096 (2.45) (2.45) .096 .157 .008 (4.0 .2) .157 .008 (2.45) (4.0 .2) .835 .02 .346 .008 (8.8 .2) .520 .008 (21.2 .5) (13.2 .2) .835 .02 .346 .008 (8.8 .2) .520 .008 (21.2 .5) (13.2 .2) .25 (6.35) .498 .248 (12.65) (6.3) .659 (16.75) .25 (6.35) .498 .248 (12.65) (6.3) .659 (16.75) PCLH type (Plug-in Terminal) PCLH type (PCB Terminal) 1.32 .02 (33.6 .5) 1.32 .02 (33.6 .5) .24 .012 (6.1 .3) .02 (.5) .079 (2.0) .02 (.5) .02 (.5) .079 (2.0) .079 (2.0) .02 (.5) NOT PRESENT ON FORM A MODELS 1.08 .02 (27.5 .5) .132 .008 (3.35 .2) .177 .012 .02 (4.5 .3) (.5) .22 .008 (5.6 .2) .835 .02 (21.2 .5) .394 .008 (10 .2) .571 .008 (14.5 .2) .02 (.5) .187 (4.75) .132 .008 (3.35 .2) .02 (.5) .02 (.5) .02 (.5) .187 (4.75) .187 (4.75) 1.08 .02 (27.5 .5) .22 .008 (5.6 .2) .835 .02 (21.2 .5) .394 .008 (10 .2) .571 .008 (14.5 .2) .285 (7.25) .285 (7.25) .518 (13.15) .234 (5.95) .02 (.5) .234 (5.95) .703 (17.85) .518 (13.15) .703 (17.85) PCLH type (Flange Mount Case) .854 MAX. (21.7) 5 6 7 8 .138 TYP. (3.5) Dimensions are shown for reference purposes only. 1.71 MAX. (43.5) 2 4 1.10 MAX. (28.0) 1.496 (38.0) 1 3 .090 TYP. (2.3) 1.60 MAX. (40.7) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 715 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Wiring Diagrams (Bottom Views) PCL 4c type PCL 2c type PCLH 2c type PCLH 1c type PCL 4a type PCL 2a type PCLH 2a type PCLH 1a type PC Board Layouts (Bottom Views) PCL 4pole type .520 (13.2) .520 (13.2) 14 - .059 DIA (1.5) .661 (16.8) .500 .252(12.7) (6.4) 1.08 (27.5) PCLH type .661 (16.8) .500 .252(12.7) (6.4) 1.08 (27.5) .248 (6.3) .83 (21.2) .571 (14.5) 8 - .079 DIA (2.0) 8 - .098 DIA (2.5) .705 (17.9) 27.5 PCL 4pole type .520 .287(13.2) (7.3) .248 (6.3) .173 (4.4) .236 (6.0) .83 (21.2) .83 (21.2) .173 (4.4) Reference Data Coil Temperature Rise Operate Time 35 100 DC 30 AC Time (msec) Temp. Rise (C) 80 60 40 DC Operate Time 20 AC 15 10 Release Time 20 5 0.4 0.8 1.2 1.6 Coil Power (W,VA) 2.0 2.4 DC AC 70 80 90 100 110 120 Coil Voltage (% of Rated Nominal) 130 Sockets For PCL socket information refer to KH series sockets (page 712). For PCLH socket information refer to K10 series sockets (page 722). Dimensions are shown for 716 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK PT series 6 to 12 Amp Miniature Relay 2, 3 or 4 Pole, PCB or Plug-in UL File E79990 NR 5353 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * Low profile height of 29mm. * DPDT, 3PDT or 4PDT contact arrangements. Must Operate Voltage: See Coil Data table. Operate Time : 15 ms typical, at nom. voltage. Release Time : 10 ms typical, at nom. voltage. Bounce Time: 5 ms typical, at nom. voltage. Switching Rate: 6 ops./minute max. at rated load. * Greater switching performance - up to 3,000VA. * AC and DC coils. * Mechanical indicator. * Manual test tab with locking option available. Environmental Data Arrangements: 2 Form C (DPDT), 3 Form C (3PDT) and 4 Form C (4PDT). Material: Silver-nickel 90/10 with optional gold plating. Minimum Load: Silver-nickel 90/10: 10mA @ 12V. Silver-nickel 90/10 with gold plating: 1mA @ 20mV. Expected Mechanical Life: DC coil 30 million operations minimum. AC coil 20 million operations minimum. Ratings: Arrangement 2 Form C 3 Form C 4 Form C Rated Current Rated Voltage Maximum Switching Voltage Rated Breaking Capacity Maximum Make Current 12A 250VAC 440VAC 3,000VA 24A 10A 250VAC 440VAC 2,500VA 20A 6A 250VAC 440VAC 1,500VA 12A Temperature Range: Storage: -45C to +80C. Operating: -45C to +70C. Vibration: 55 to 150 Hz. at 7g N/O, 4g N/C. Operational Shock: 20g N/O, 5g N/C. Mechanical Shock: 50g. Electrical Life 107 250VAC Resistive Load Operations Contact Data @ 20C Initial Dielectric Strength Between Open Contacts: 1,500VAC. Between Coil and Contacts: 2,500VAC; 5,000V surge (1.2 / 50s). Between Poles: 2 and 3 Pole:2,500VAC, 4 Pole: 2,000VAC. 106 105 104 0 4 8 12 16 Switching Current (A) 20 DC Coil Data @ 20C Max. DC Load Breaking Capacity (resistive load) Nominal Coil Power: 750mW DC Resistance in Ohms 10% Must Operate Voltage VDC Drop-out Voltage VDC Nominal Coil Current (mA) 06 12 24 48 60 110 220 48 192 777 3,072 4,845 16,133 64,533 4.5 9.0 18.0 36.0 45.0 82.5 165.0 0.6 1.2 2.4 4.8 6.0 11.0 22.0 125.0 62.5 30.8 15.6 12.4 6.8 3.4 50 2 Pole DC Current (A) Nominal Voltage VDC 10 3 Pole 5 2 1 4 Pole 0.5 0.1 10 20 30 4050 100 200 300 DC Voltage (V) AC Coil Data @ 20C Must Operate Voltage (VAC) 50 Hz / 60 Hz Drop-out Voltage VAC Nominal Coil Current (mA) 50 Hz. / 60 Hz. 06 12 24 48 60 115 230 11 48 192 777 1,306 4,845 19,465 4.8 / 5.4 9.6 / 10.8 19.2 / 21.6 38.4 / 43.2 48.0 / 54.0 92.0 / 103.5 184.0 / 207.0 1.8 3.6 7.2 14.4 18.0 34.5 69.0 166.5 / 141 83.3 / 70.5 41.6 / 33.0 21.3 / 18.2 16.7 / 14.5 8.8 / 7.5 4.3 / 3.9 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 220 200 AC Coil 180 160 140 120 100 80 60 0 +20 +40 +60 +80 +100 Ambient Temperature (C) Specifications and availability subject to change. Applied Coil Voltage (% of Nominal) Nominal Voltage VAC DC Resistance in Ohms 10% Applied Coil Voltage (% of Nominal) Coil Operating Range Nominal Coil Power: 1.0VA @ 50 Hz. / 0.86VA @ 60 Hz. 220 200 DC Coil 180 160 140 120 100 80 60 0 +20 +40 +60 +80 +100 Ambient Temperature (C) www.tycoelectronics.com Technical support: 717 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information B Typical Part Number PT 2 7 0 024 1. Basic Series: PT = General purpose relay. 2. Contact Arrangement: 2 = 2 Form C (DPDT) 3 = 3 Form C (3PDT) 5 = 4 Form C (4PDT) 3. Contact Material and Test Button Option: 2 = Silver-Nickel 90/10, no test button. 7 = Silver-Nickel 90/10 with locking test button. 3 = Silver-Nickel 90/10, with gold plating, no test button. 8 = Silver-Nickel 90/10, with gold plating, and locking test button. 4. Termination: 0 = Socket mount, solder terminals. 5. Coil Voltage: 006 = 6VDC 506 = 6VAC 012 = 12VDC 512 = 12VAC 1 = Printed circuit board terminal. 024 = 24VDC 524 = 24VAC 048 = 48VDC 548 = 48VAC 060 = 60VDC 560 = 60VAC 110 = 110VDC 220 = 220VDC 615 = 115VAC 730 = 230VAC Our authorized distributors are more likely to stock the following items for immediate delivery. PT220024 PT220524 PT220615 PT320024 PT320524 PT320615 PT270024 PT270524 PT270615 PT221024 PT221524 PT221615 PT321024 PT321524 PT321615 PT520024 PT520524 PT520615 PT370024 PT370524 PT370615 PT521024 PT521524 PT521615 PT570024 PT570524 PT570615 PT580024 PT580524 PT580615 Outline Dimensions Socket Mount, Solder Terminals 1.102 (28) .882 (22.4) 1.102 (28) .882 (22.4) Printed Circuit Board Terminals 1.14 (29) 1.14 (29) .020 (0.5) .047 (1.2) .236 (6.0) .165 (4.2) .087 (2.2) .185 (4.7) .020 (0.5) .095 (2.4) Wiring Diagrams (Bottom Views) (1) 12 (4) 42 (1) 12 (2) 22 (1) 12 (3) 32 (2) 22 (3) 32 (4) 42 (5) 14 (8) 44 (5) 14 (6) 24 (7) 34 (5) 14 (6) 24 (7) 34 (8) 44 (9) 11 (12) 41 (9) 11 (10) 21 (11) 31 (9) 11 (10) 21 (11) 31 (12) 41 (13) A1 (14) A2 (13) A1 (14) A2 (13) A1 (14) A2 PC Board Layout (Bottom Views) .173 (4.4) .173 (4.4) .173 (4.4) .173 (4.4) .173 (4.4) .175 (4.45) .157 (4.0) .25 (6.35) .260 (6.6) .260 (6.6) .173 (4.4) .519 (13.2) O .051 + .004 (1.3 + 0.1) .25 (6.35) Dimensions are shown for 718 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 27E894 DIN Rail Socket with Screw Terminals, 4 pole 1.181 (30.00) .236 (5.99) M3 SCREWS & CAPTIVE WASHERS .709 (18.01) .165 (4.19) 1.771 (44.98) 2.441 (62.00) .118 (3.00) 1.024 (26.01) .728 (18.49) .984 (24.99) PT78702, PT78703, PT78704 (2, 3 and 4 Pole) 27E023 DIN Rail Socket with Screw Terminals 4 Pole Socket with PCB Terminals 1.06 (27.0) 1.67 (42.5) .889 (22.5) 1.150 (29.21) 1.06 (27.0) GROUND LUG .850 (21.59) 2.95 (75.0) .061 (1.55) .218 .016 (5.54 0.41) .126 (3.2) .171 (4.34) 27E006 27E220 4 Pole Socket with Solder Terminals 2 Pole Socket with PCB Terminals 1.150 (29.21) 1.150 (29.21) GROUND LUG .850 (21.59) .125 .010 (3.18 0.25) .218 .016 (5.54 0.41) .105 (2.67) Socket Selection Table Socket Termination 27E894 PT78702 PT78703 PT78704 27E006 27E220 27E023 Screw Terminals Screw Terminals Screw Terminals Screw Terminals .375 (9.53) Solder Terminals .218 (5.54) Solder Terminals .218 (5.54) PCB Terminals .171 (4.34) LED and Protection Module Selection Table Stock items are boldfaced. Socket Part No. .061 (1.55) .850 (21.59) .052 .010 (1.32 0.25) Stock items are boldfaced. Mounting Style No. of Poles Accepts Modules? DIN-rail DIN-rail DIN-rail DIN-rail Panel Cutout PC Board PC Board 4 2 3 4 4 2 4 No Yes Yes Yes No No No Module Part No. Type RPM T0 0A0 RPM U0 548 RPM U0 730 RPM L0 024 RPM L0 524 RPM L0 110 RPM L0 730 Protection diode 1N4007 (Note 1) RC network 24-48VAC RC network 110-230VAC LED 12-24VDC (Note 1) LED 12-48VAC/VDC LED 110VDC (Note 1) LED 110-230VAC Note 1: Standard polarity: A1: +, A2: - Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 719 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B K10 series 15 Amp General Purpose Miniature Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features DC Coils * K10 - DPDT contact arrangement standard. * AC and DC coils. * Mounting options include socket, PCB, top flange. * UL Class B coil insulation system. Nominal Voltage 6 12 24 48 110 120* 240* Contact Data @ 25C Resistance in Ohms 10% 40 160 650 2,600 11,000 ___ ___ AC Coils Nominal Current in Milliamps Resistance in Ohms 15% Nominal Current in Milliamps 150 75 37 18.5 10 ___ ___ 10.5 43 160 668 ___ 3,900 12,000 200 100 52 26 ___ 11 6 *For 220/240VDC operation, use 11,000 Ohm, 5 Watt dropping resistor in series with the 110VDC coil. Materials: Silver-cadmium oxide. Expected Life: 10 million operations, mechanical; 100,000 operations minimum at rated loads. Contact Ratings Contact Code 5 Material Silver-cadmium oxide UL/CSA Ratings 15A @ 30VDC 15A @ 120VAC 10A @ 277VAC 1/3HP @ 120VAC 1/2HP @ 250VAC Type Resistive Resistive Resistive Operate Data @ 25C Must Operate Voltage: DC Coils: 75% of nominal voltage. AC Coils: 85% of nominal voltage. Operate Time (Excluding Bounce): 13 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): 6 milliseconds, typical, at nominal voltage. Initial Dielectric Strength Between Open Contacts: 1,000V rms. Between Adjacent Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms. Environmental Data Temperature Range: Storage: -60C to +105C. Operating: -45C to +70C. Coil Data @ 25C Mechanical Data Nominal Power: DC Coils: .9 Watts. AC Coils: 1.2VA. Maximum Power: 2.0 Watts. Duty Cycle: Continuous. Insulation: Class B: (130C). Dimensions are shown for 720 reference purposes only. Mounting: Socket mount, printed circuit board, top flange. Termination: .187" (4.75mm) quick connect/solder terminals, or printed circuit terminals. Enclosure: Smoke-color polycarbonate dust cover. Weight: 1.8 oz. (51g) approximately. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B K10 P -11 D 1 5 -6 1. Basic Series: K10 = 15 amp miniature relay. 2. Cover: P = Polycarbonate (smoke color). 3. Contact Arrangement: 11 = 2 Form C (DPDT) 4. Coil Input: A = 50/60 Hz. AC D = DC 5. Mounting & Termination: 1 = Socket mount; .187" (4.75mm) quick connect/solder terminals. 5 = Printed circuit terminals; .160" length. T = Mounting bracket on end of cover; .187" (4.75mm) quick connect/solder terminals. 6. Contact Type: 5 = 15 amp silver-cadmium oxide 7. Coil Voltage: To 240VAC or 110VDC, see coil data table. Our authorized distributors are more likely to stock the following items for immediate delivery. K10P-11D55-24 K10P-11D55-110 K10P-11DT5-12 K10P-11DT5-24 K10P-11D15-6 K10P-11D15-12 K10P-11D15-24 K10P-11D15-110 K10P-11D55-12 K10P-11A15-6 K10P-11A15-12 K10P-11A15-24 K10P-11A15-120 K10P-11AT5-120 Outline Dimensions .078 (1.98) 5 6 2 4 B .281 (7.14) .239 REF. (6.07) 1 3 A .559 (14.20) .517 (13.13) .232 (5.89) .285 (7.24) 5 6 .020 .0 02 (.51 .05) B .160 (4.06) .142 TYP. (3.61) 1.682 MAX. (42.72) .394 .860 MAX. (10.01) (21.84) .181 (4.60) PC Board Layout .394 .185 (10.01) (4.70) 2 4 A .078 (1.98) .020 .0 02 (.51 .05) 1.109 MAX. (28.17) 1 3 .078 TYP. (1.98) 1.720 MAX. (43.69) .25 (6.4) .854 MAX. (21.69) w/NEON INDICATOR 1.625 MAX. (41.28) 1.400 MAX. (35.56) w/NEON INDICATOR 1.600 MAX. (40.64) 1.375 MAX. (34.93) .125 (3.18) .187 .0 02 (4.75 .05) Mounting Code T Printed Circuit Terminals 1.480 .0 03 (37.59 .08) Mounting Code 5 Socket Mount 1.087 .010 (27.61 .25) Mounting Code 1 Wiring Diagram .086 DIA. (2.18) 1 2 3 4 5 6 A B .559 (14.20) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 721 Catalog 1308242 Issued 3-03 P&B Sockets and Accessories for K10 Relays Sockets for K10 series relays are rated 10 amps, and are UL recongnized, File E59244, and CSA certified, File LR15734. 27E488 Pierced Solder Terminals .844 (21.44) 20C217 Hold Down Spring For 27E488 & 27E489 Chassis Cutout For Mounting 27E488 Socket .075 (1.90) 1.158 (29.41) .629 .617 (15.98) (15.67) .850 .0 05 (21.79 .13) .440 (11.18) .072 x .140 (1.83 x 3.56) .070 (1.78) Recommended chassis thickness .039" (.99mm) to .079" (2.01mm). .770 (19.56) Socket punch Greenlee part 5015115.0, Type 731R available from Greenlee Tool Co., Rockford, Illinois. 27E489 Printed Circuit Terminals .844 (21.44) P.C. Board Layout For Socket .440 (11.18) .075 (1.90) 1.158 (29.41) .672 (17.07) .012 (0.30) .620 (15.75) .184 (4.69) 1.323 (33.60) 1.388 (35.26) 1.015 1.750 (25.78) (44.45) .090 R. (2.29) .090 (2.29) .429 (10.90) .859 (21.79) .13 (3.3) .16 (4.1) .065 (1.65) .180 (4.57) .32 (8.1) 37D633 will mount eight 27E488 sockets in one length of aluminum strip measuring 10.97" x 2.25" x .062". (278.64 x 57.15 x 1.57) Caution: Printed circuit sockets are manufactured with "floating" (loose) terminals. This permits them to align with holes in the circuit board and with the relay terminals. During the mounting and soldering of the socket, vertical float should be eliminated and the terminals seated on the board. (This may be accomplished by inserting a dummy relay in the socket.) Failure to eliminate float may cause fracture of the solder joint or separation of the copper conductor from the printed circuit board when a relay is inserted in the socket after soldering. .507 .086 DIA. TYP. (2.18) (12.88) .113 (2.87) 1.388 (35.26) .25 (6.4) 1.015 .0 05 (28.07 .13) .012 (0.30) 37D633 Mounting Strip .417 (10.59) .185 (4.70) Note: P.C. terminal socket will also fit P.C. board layout for relay. However, in order to accomplish this, terminals must be formed accordingly. .078 (1.98) 27E895 Screw Terminals, DIN Rail Snap-Mount 27E487 Screw Terminals 20C426 Hold Down Spring (Use with mounting track 24A110) For 27E487 & 27E895 Terminal Location 1.036 (26.31) 4 Terminal Location 1.130 (28.70) 3 1.299 (32.99) 4 3 2 1 1.375 (34.93) 2 1 2.750 (69.85) 2.598 (65.99) .170 TYP. (4.32) B A 8 7 .156 TYP. (3.96). 8 .315 TYP. (8.00) 6 5 .313 TYP. (7.94) .669 (16.99) 1.178 (29.92) 7 6 5 1.385 (35.18) .995 (25.27) Dimensions are shown for 722 reference purposes only. .312 (7.92) Dimensions are in inches over (millimeters) unless otherwise specified. 1.045 (26.54) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC File E22575 File LR15734 0435 Registration 1792 (KUIP) 0435 Registration 1792 (KUGP) License 81.12102.01 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25C * AC coils: 6-240VAC, 50/60 Hz. DC: 6-110VDC. * Contact arrangement up to 4PDT. * Wide selection of termination and mounting styles. * PC terminals available. * Push to test button and indicator lamps. * KUEP incorporates a blow out magnet for high voltage DC switching. * KUIP/KUGP are VDE approved. * Complete line of sockets and DIN rail. * Class B coil insulation. Voltage: 6 to 110VDC and 6 to 240VAC. Nominal Coil Power: DC Coils: 1.2 Watts - KUP, KUIP, KUMP, 1 - 3 pole; KUEP, 1 pole. DC Coils: 1.8 Watts - KUP, 4 pole; KUEP, 2 pole; KUGP. AC Coils: 2.0VA - KUP, KUIP, 1 - 2 pole; KUEP, 1 pole. AC Coils: 2.7VA - KUP, KUIP, 3 pole; KUEP, 2 pole; KUGP, KUMP. Contact Data @ 25C Arrangements: See respective ordering information table. Materials: Fine silver (5 amp) silver-cadmium oxide (10 amp). Gold flash available as standard. Gold diffused and gold alloy on special order. Expected Mechanical Life: Contact Ratings Material Fine Silver SilverCadmium Oxide Arrangement All 1-2 Pole KUP KUIP KUGP KUEP All KUMP KUMP 3 Pole KUP KUIP 4 Pole KUEP SPST-NO KUEP 2PST-NO KUEP 2PDT UL/CSA Ratings 5 amps @ 28VDC or 240VAC 80% PF, 2.5 amp tungsten @120VAC, 1/2 amp @ 120VDC. 1/6 HP @120VAC, 1/3 HP @ 240VAC, 5 FLA, 15 LRA @ 250VAC (FLA covered by 30,000 operations). 10 amps @ 28VDC or 240VAC, 80% PF, 5 amp tungsten @ 120VAC, 3A 600VAC, 1/2 amp @ 120VDC. 1/3 HP @ 120VAC, 1/2 HP @ 240, 480, and 600VAC, 10 FLA 30 LRA @ 120VAC, 5 FLA, 15 LRA @ 250VAC.(FLA ratings covered by 30,000 operations) 15 amp @ 277VAC, 80% PF KUM KUMP 10 amp @ 28VDC or 120VAC, 80% PF, 6 2/3 amp @ 240VAC, 80% PF 10 amp per pole not to exceed 30 amp total @ 28VDC, 120VAC, 80% PF, 6 2/3 amp @ 240VAC, 80% PF Expected Life 100,000 DC Volts Nominal 5 6 12 24 48 110 1.2 Watt 1.8 Watt DC Ohms 10% Nom. I ma DC Ohms 10% Nom. I ma 21 238 14 360 32.1 187 20 300 120 100 80 150 472 51 320 75 1,800 26.7 1,260 38 10,000 11 6,720 16 AC Volts Nominal 2VA DC Ohms 15% 6 12 24 120 240 100,000 6 24 85 2,250 9,110 335 168 84 17.5 8.75 4.2 18 72 1,700 7,200 460 230 115 24 12 Must Operate Voltage: DC Coils: 75% of nominal voltage or less. AC Coils: 85% of nominal voltage or less. Operating Time (Excluding Bounce): 15 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): 10 milliseconds, typical, at nominal voltage. 100,000 100,000 Environmental Data 100,000 5 amp @ 150VDC 100,000 (All other AC ratings apply KUEP.) Temperature Range: Operating: Enclosed Relays: -45C to maximum listed in table below. Open Relays: Add 15C to maximum listed. Max C +45C +50C KUP AC 3-4 pole DC 4 pole KUIP KUGP Initial Dielectric Strength KUEP Between Open Contacts: 1,200V rms; KUGP, 3,500V rms. Between Adjacent Contacts: 2,200V rms. Between Contacts and Coil: 2,200V rms; KUGP, KUIP, 3,750V rms. KUMP Dimensions are shown for reference purposes only. 2.7VA Nom. I ma DC Ohms 15% Nom. I ma Operate Data @ 25C 10 amp @ 150VDC 3 amp @ 150VDC Coil Data Dimensions are in inches over (millimeters) unless otherwise specified. AC 2 pole AC 3 pole DC 2 pole Specifications and availability subject to change. +55C +70C AC DC 1-2 pole 1-3 pole AC 3 pole AC 2 pole AC DC 1 pole 1 pole AC DC 1-2 pole 1-3 pole +75C +80C +95C AC 1-2 pole DC 1-3 pole DC 2 pole www.tycoelectronics.com Technical support: Refer to inside back cover. 723 Catalog 1308242 Issued 3-03 Environmental Data (Continued) 1. 8 il C Co il 40 L OI L OI .C Hz 20 Co 60 50 .C Hz 30 C 60 W at tD W at tD 60 40 1.2 A 7V 2. 50 Max. Ambient Temp. C 60 Termination: Quick connect, solder and PC board. Enclosure: Clear polycarbonate dust cover. Weight: 3.0 oz. (85g) approximately. 75 70 A 0V 2. Max. Ambient Temp. C Maximum Allowable Ambient Temperature vs. Voltage (KUP enclosed) 75 70 P&B Mechanical Data 30 20 100 100 110 120 130 140 150 160 % of Nominal Voltage DC 110 120 130 140 % Of Nominal 60 Hz. Voltage Ordering Information Typical Part No. B 1. Basic Series & Type: KU = Basic open relay. KUP = Basic enclosed relay. 2. Contact Arrangement: 1 = 1A (SPST-NO) 5 = 1C (SPDT) 11 = 2C (DPDT) KU KUP -14 A 1 5 F -120 14 = 3C (3PDT) 17 = 4C (4PDT) 3. Coil Input: A = AC 50/60 Hz. D = DC 4. Mountings: Type KU Codes Available 1,3,4 OPEN STYLE 1 = #6-32 stud, .218" (5.54mm) locating tab. 3 = #6-32 tapped core, .125" (3.18mm) locating tab. 4 = #6-32 tapped core, .218" (5.54mm) locating tab. KUP (through 3 poles) KUP (4 pole models) 1,2,3,4,5, A,E,T 1,3,5,A,E 1 = PLAIN CASE; 2 = with test button. 3 = with indicator lamp.* 4 = with test button & indicator lamp.* 5 = BRACKET MOUNT CASE. A = PLAIN CASE, #6-32 stud, locating tab. E = PLAIN CASE, tapped core, locating tab. T = TOP FLANGE CASE. * Indicator lamps are available on models with the following coils: 6-24VAC and DC, 110VDC and 120-240VAC. Only models with 120-240VAC coils are UL recognized. 5. Terminal & Contact Material: Type 1 & 2 Pole Models Codes 1, 5, 7, K Available 3 Pole Models 1, 5, 7 4 Pole Models 1**, 5**,7, 9 **4 pole KUP with .187" (4.75mm) quick connect/solder terminals will not plug into sockets. Must use .110" (2.79 mm) quick connect solder terminals for socket mounting. 1 = .187" (4.75mm) quick-connect/solder; silver, 5 amps. 5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide, 10 amps. 7 = .047" (1.19mm) printed circuit; silver-cadmium oxide, 10 amps. 9 = 4 pole KU, KUP: .110" (2.79mm) quick connect/solder; silver-cadmium oxide, 10 amps. K = .250" (6.35mm) quick connect; silver-cadmium oxide, 10 amps. 5A. Gold Flashed Contact Option: F = Optional gold flashing for silver and silver-cadmium oxide contacts. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock KUP-5A15-24 KUP-5A15-120 KUP-5A15-240 KUP-5A55-120 KUP-5D15-12 KUP-5D15-24 KUP-5D55-12 KUP-5D55-24 KUP-11A11-120 Dimensions are shown for 724 reference purposes only. KUP-11A15-12 KUP-11A15-24 KUP-11A15-120 KUP-11A15-240 KUP-11A35-120 KUP-11A55-24 KUP-11A55-120 KUP-11AT5-120 KUP-11D11-24 KUP-11D15-5 KUP-11D15-12 KUP-11D15-24 KUP-11D15-110 KUP-11D35-24 KUP-11D55-6 KUP-11D55-12 KUP-11D55-24 KUP-11D55-48 Dimensions are in inches over (millimeters) unless otherwise specified. KUP-11D55-110 KUP-14A11-120 KUP-14A15-12 KUP-14A15-24 KUP-14A15-120 KUP-14A15-240 KUP-14A25-120 KUP-14A35-120 KUP-14A45-120 KUP-14A55-24 KUP-14A55-120 KUP-14A55-240 KUP-14D11-24 KUP-14D15-6 KUP-14D15-12 KUP-14D15-24 KUP-14D15-48 KUP-14D15-110 Specifications and availability subject to change. KUP-14D25-24 KUP-14D35-24 KUP-14D55-12 KUP-14D55-24 KUP-17A19-120 KUP-17A55-24 KUP-17D19-24 KUP-17D55-24 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information VDE Approved Design Typical Part No. B KUIP KUGP 1. Basic Series & Type: KUIP = Enclosed relay designed for General VDE 0435.* KUGP = Enclosed relay with 3mm open contact spacing. (Form A and Form X arrangements only)* 2. Contact Arrangement: 5 = 1 Form C (SPDT)* 7 = 2 Form A (DPST-NO) -5 A 5 5 -120 11 = 2 Form C (DPDT)* 14 = 3 Form C (3PDT)* 3. Coil Input: A = AC, 50/60 Hz.* D = DC* 4. Mountings: 1 = PLAIN CASE, SOCKET MOUNT.* 5 = BRACKET MOUNT CASE.* T = TOP FLANGE CASE.* 5. Terminal & Contact Material: 3 = .047" (1.19mm) printed circuit board; silver. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. (For 277VAC, consult factory.)* 5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide.* See coil data tables. * Options included in VDE file. Our authorized distributors are more likely to stock the following items for immediate delivery. KUGP-7D55-24 KUIP-5A55-120 KUIP-11D55-12 KUIP-11D55-24 KUIP-14A15-120 KUIP-14D15-12 KUIP-14D15-24 Ordering Information High Voltage DC Switching Typical Part No. B 1. Basic Series & Type: KUEP = Enclosed relay with magnetic blow-outs. 2. Contact Arrangement: 3 = 1X (SPST-NO-DM) 3. Coil Input: A = AC 50/60 Hz. 4. Mountings: 1 = PLAIN CASE; 3 = with indicator lamp.* 5 = BRACKET MOUNT CASE T = TOP FLANGE CASE. 5. 6. 7 = 2A (DPST-NO) KUEP -3 A 1 5 -120 11 = 2C (DPDT) D = DC *Indicator lamps are available on models with the following coils: 6-24VAC and DC, 110VDC and 120-240VAC. Only models with 120-240VAC coils are UL recognized. Terminal & Contact Material: 5 = .187" (4.75mm) quick connect/solder; silvercadmium-oxide. 7 = .047' (1.19mm) printed circuit; silver-cadmium-oxide. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. (For 277VAC, consult factory.) Our authorized distributors are more likely to stock the following items for immediate delivery. KUEP-3A15-120 KUEP-3D15-12 KUEP-3D15-24 Dimensions are shown for reference purposes only. KUEP-3D15-110 KUEP-7D15-24 KUEP-11A15-120 KUEP-11D15-12 KUEP-11D15-24 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 725 Catalog 1308242 Issued 3-03 P&B Ordering Information 15 Amp Switching Typical Part No. B 1. Basic Series & Type: KUM = 15 amp open relay KUMP = 15 amp enclosed relay 2. Contact Arrangement: 1 = 1A (SPST-NO) 2 = 1B (SPST-NC) 3 = 1X (SPST-NO-DM) 4 = 1Y (SPST-NC-DB) 5 = 1C (SPDT) 6 = 1Z (SPDT-NC-NO [DB-DM]) 7 = 2A (DPST-NO) 8 = 2B (DPST-NC) 11 = 2C (DPDT) 12 = 3A (3PST-NO) 13 = 3B (3PST-NC) 14 = 3C (3PDT) 3. Coil Input: A = AC, 50/60 Hz. 4. Mountings: Type KUM OPEN STYLE 1 = #6-32 stud, .218" (5.54mm) locating tab. 2 = 2-hole bracket, #6-32 tapped. 3 = #6-32 tapped core, .125" (3.18mm) locating tab. 4 = #6-32 tapped core, .218" (5.54mm) locating tab. 5 = #6-32 tapped core, no locating tab. 5. KUM KUMP -14 A 1 8 -120 D = DC 1 = PLAIN CASE; 2 = with test button. 3 = with indicator lamp.* 4 = with test button & indicator lamp.* 5 = BRACKET MOUNT CASE; 6 = with test button. 7 = with indicator lamp.* 8 = with test button & indicator lamp.* 9 = STUD ON END OF PLAIN CASE. KUMP A = PLAIN CASE, #6-32 STUD LOCATING TAB; B = with test button. C = with indicator lamp.* D = with test button & indicator lamp.* E = PLAIN CASE, TAPPED CORE, LOCATING TAB; F = with test button. G = with indicator lamp.* H = with test button & indicator lamp.* T = TOP FLANGE CASE. *Indicator lamps are available on models with the following coils: 6-24VAC and DC, 110VDC and 120-240VAC. Only models with 120-240VAC coils are UL recognized. Terminal & Contact Material: Type 1 & 2 Pole Models Codes 6,8,9,G Available 3 Pole Models 6,8,9 6 = .205" (5.21mm) quick connect/solder; silver-cadmium-oxide. 8 = .187" (4.75mm) quick connect/solder; silver-cadmium-oxide. 9 = .047" (1.19mm) printed circuit; silver-cadmium-oxide. G = .250" (6.35mm) quick connect; silver-cadmium-oxide. (Not available on 3 pole models.) 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC (For 277VAC, consult factory.) Our authorized distributors are more likely to stock the following items for immediate delivery. KUMP-11A18-24 KUMP-11A18-120 KUMP-11A18-240 Dimensions are shown for 726 reference purposes only. KUMP-11D18-12 KUMP-11D18-24 KUMP-11D18-110 Dimensions are in inches over (millimeters) unless otherwise specified. KUMP-14A18-24 KUMP-14A18-120 KUMP-14D18-12 KUMP-14D18-24 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Open Relays X Is For Terminal Dimensions. See Terminal Drawings. Bracket Type 2.43 MAX.* (61.72) 2.33 MAX.** (59.18) 2.29 MAX.*** (58.17) 1.437 (36.50) .19 (4.8) X .63 (16.0) .63 (16.0) 1.468 MAX. (37.29) .031 REF. (.79) 1.391 (35.33) .109 MAX. (2.77) .065 (1.65) .437 (11.10) 1.52" (38.6mm) for bracket with 2-#6 32 tapped holes. 2.27 MAX.* (57.7) 2.171 MAX.** (55.14) 2.125 MAX.*** (53.98) Stud Type 2.27 MAX.* (57.7) 2.171 MAX.** (55.14) 2.125 MAX.*** (53.98) .218 (5.54) 1.391" (35.33mm) for #6-32 stud with .218" (5.54mm) locating tab. X X .16 (4.1) (2) #6-32 THREAD TAPPED HOLES 1.39 MAX.* (35.3) 1.29 MAX.** (32.8) 1.25 MAX.*** (31.8) 1 4 2 5 3 6 7 8 9 A .031 REF. (.79) 1.282 MAX. (35.56) 1.687 MAX. B (42.85) .31 (7.9) #6-32 THREAD Seated Heights For Open Relays 1.282" (32.56mm) for #6-32 tapped core with .125" (3.18mm) or .218" (5.54mm) locating tab. 2.046" (51.97mm) for relay with printed circuit terminals. STUD TYPE also available with .125" (3.18mm) tab, as well as without stud and locating tab. Models without stud have core tapped #6-32 THREAD, .25" (6.4mm) minimum depth. *Dimensions with .250" (6.35mm) terminals. **Dimensions with .110" (2.79mm) or .205"(5.21mm) terminals. ***Dimensions with .187" (4.75mm) terminals. .150 TAB WIDTH (3.81) Enclosed Relays Plain Case Core and Stud Mount Cases .187 (4.75) DIA. PUSH-TO-TEST BUTTON AVAILABLE ON KUP, & KUMP .288 (7.32) X 1 4 2 5 3 6 7 8 9 1.406 MAX. (35.71) X X 1.43 MAX. (36.27) 1.74 MAX. (44.2) STUD with #6-32 THREAD or CORE TAPPED #6-32 .437 .010 (11.10 .25) B A X Is For Terminal Dimensions. See Teminal Drawings. X X .130 (3.30) 1.531 MAX. (38.89) .219 MAX. (5.56) 1.968 MAX. (49.99) 1.906 MAX. (48.41) 1.968 MAX. (49.99) 1.906 MAX. (48.41) 1.39 MAX.* (35.3) 1.29 MAX.** (32.8) 1.25 MAX.*** (31.8) .312 (7.92) Dimensions with .250" (6.35mm) terminals. Top Flange Case .078 TYP. (1.98) Dimensions with .110" (2.79mm), .187" (4.75mm and .205" 5.21mm) terminals. 1.518 MAX. (38.56) *Dimensions with .250" (6.35mm) terminals. 1 4 2 5 3 6 7 8 9 **Dimensions with .110" (2.79mm) or .205" (5.21mm) terminals 1.713 .0 03 (43.51 .08) 1.373 .010 1.989 .0 03 (34.87 .25) (50.52) ***Dimensions with .187" (4.75mm) terminals. B A 2.248 MAX. (57.10) Stud on End Case .085 MAX. (2.16) Bracket Mount Case 2.90 MAX. (73.7) X .078 R. TYP. (1.98) .75 (19.1) 1.531 MAX. (38.89) .375 (9.53) Dimensions are shown for reference purposes only. 2.500 (63.50) X X .437 (11.10) PUSH-TO-TEST BUTTON AVAILABLE ON KUP & KUMP 1.406 MAX. (35.71) 1.128 (28.65) .625 TYP. (15.88) .312 TYP. (7.92) 1.968 MAX. (49.99) 1.906 MAX. (48.41) .38 (9.7) .178 TYP. (4.52) .07 (1.8) Dimensions are in inches over (millimeters) unless otherwise specified. .06 (1.52) #6-32 THREAD .16 (4.1) 1.968 MAX. (49.99) 1.906 MAX. (48.41) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 727 Catalog 1308242 Issued 3-03 P&B Outline Dimensions (Continued) Relay Front Diagrams Relays With .250" (6.35mm) Terminals 1-3 Pole Relays 1.531 MAX. (38.89) 4 Pole Relays 1.531 MAX. (38.89) 1.531 MAX. (38.89) 1 4 2 5 3 6 7 8 9 A 1 4 7 1.406 MAX. (35.71) 2 5 11 2 2 3 3 4 5 6 4 7 8 3 6 9 1.406 MAX. (35.71) 10 11 12 A B A B 9 1.406 MAX. (35.71) B Terminal Dimensions .110" (2.79mm) Quick ConnectQuick Connect .109 (2.77) .205" (5.21mm) Quick Connect .034 (.86) .311 REF. (7.90) .280 (7.11) .070 DIA. (1.78) .205 .0 02 (5.21 .05) HEADER .110 (2.79) .035 (.89) .093 (2.36) .156 (3.96) HEADER .035 (.89) .250" (6.35mm) .035 .285 (.89) (7.24) .316 REF. (8.03) THICKNESS .032 (.81) .032 THICKNESS (.81) .134 (3.40) .312 (7.92) .187" (4.75mm) Quick Connect .047 (1.19) Note: All drawings shown oversize. .187 .002 (4.75 .05) .250 .078 (6.35) (1.98) .281 REF. (7.14) .020 THICKNESS (.51) .237 .156 (6.02) (3.96) .268 REF. (6.81) .032 THICKNESS (.81) HEADER .180 (4.57) HEADER .125 (3.18) .093 (2.36) .305 (7.75) .358 REF. (9.09) THICKNESS .032 (0.81) .156 (3.96) Printed Circuit .250 .0 03 (6.35 .08) HEADER Wiring Diagrams *1 Form X 1 Form C *2 Form A 2 4 - A 6 + - +4 5 7 B A - B 7 A +6 - 3 Form C *2 Form C - 9 + B 1 4 7 A - - + 4 Form C 2 4 3 3 1 2 3 1 6 4 5 6 5 6 7 8 9 7 8 9 9 10 11 12 B A B A B *Recommended Load Polarity for Optimum Arc Suppression. PC Board Layouts (Bottom Views) 1 Form X 3 Pole Models .076 DIA. TYP. (1.93) .076 DIA. TYP. (1.93) 4 Pole Models .076 DIA. TYP. (1.93) .206 (5.23) .626 (15.90) .328 (8.33) .328 (8.33) .626 (15.90) .875 (22.23) .437 (11.10) .340 (8.64) .875 (22.23) Dimensions are shown for 728 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. .206 (5.23) .626 (15.90) .170 (4.32) .510 (12.95) 1.020 (25.91) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Sockets For KU Series Relays Through 3 Poles Socket Selection Table Stock items are boldfaced. For KUP, KUEP, KUGP, KUIP, and KUMP relays, through 3 poles, with .187" (4.75mm) quick connect termination. Socket 27E043 27E046 27E067 27E121 27E305 27E396 27E893 Socket Termination Solder eyelet PC board, .144" (3.66mm) terminals .187" (4.75mm) quick connect Screw terminals PC board, .184" (4.67mm) terminals .187" (4.75mm) quick connect* Screw terminals Hold-Down Spring 20C228 or 20C254* 20C228 or 20C254 20C228 or 20C254 20C314 (2 per socket required) 20C228 or 20C254 20C254 20C318 * 20C228 held in place by socket hold-down screw where as 20C254 snaps onto socket. ** Snap-in mounting. DIN rail mounting. Hard Mount Sockets For Relays Through 3 Poles 27E067 27E043 .50 TYP. (12.7) 1.687 .010 (42.85 .25) Nylon sockets with .187" (4.75mm) quick .165 DIA. connect, solder or printed circuit terminals (4.19) are available for KUEP, KUGP, KUIP, KUMP, 2 HOLES and KUP relays, through 3 poles, with .187" (4.75mm) quick connect terminals. All are rated 15 amps and UL recognized, File 1.370 (34.80) E59244 and CSA certified File LR15734 27E043-with solder eyelet terminals. 27E067-with .187" (4.75mm) quick connect terminals. 1.250 (31.75) 2.03 (51.56) .875 .010 (22.23 .25) 1.50 (38.1) 1.250 (31.75) .297 (7.54) .125 (3.18) .250 (6.35) .125 (3.18) .250 (6.35) .297 (7.54) .34 MAX. (8.64) .34 MAX. (8.64) The 27E043 and 27E067 use chassis cutout shown on this page. 1.375 (34.93) 27E046, 27E305 Socket With Printed Circuit Terminals .50 TYP. (12.7) 2 HOLES .165 DIA. (4.19) .875 (22.23) 1.687 .010 (42.85 .25) .076 DIA. (1.93) 1.370 (34.80) 1.50 (38.1) 27E396 Snap-In Socket For Relays Through 3 Poles Suggested Socket PC Board Layout 2.03 (51.56) .437 (11.10) .218 (5.54) 1.687 (42.85) .626 (15.90) 1.076 (27.33) .090 TYP. (2.29) .875 .010 .125 (22.23 .25) (3.18) .023 (.58) .297 (7.54) .180 TYP. (4.57) .156 TYP. (3.96) .328 (8.33) Nylon snap-in socket with .187" (4.75mm) quick connect terminals is available for KUEP, KUGP, KUIP, KUMP, and KUP relays, through 3 poles, with .187" (4.75mm) quick connect terminals. Snap-in sockets reduce labor by eliminating time consuming screw or rivet mounting. Preassembled wiring harnesses may also be used as the sockets are designed to snap into the chassis from either front or back. All are rated 15 amps and UL recognized, File E59244. The 27E396 uses chassis cutout shown on this page. 27E396-with .187" (4.75mm) quick connect terminals. 27E046 HAS TERMINALS .144" (3.66 mm) LONG. 27E305 HAS TERMINALS .184" (4.67 mm) LONG. .396 (10.06) Recommended Chassis Cutout For Hard Mount Sockets .875 (22.23) 1.260 (32.00) 1.395 (35.43) .020 (.51) 1.687 (42.85) 1.270 (32.26) .110 (2.79) 4 PLACES .260 (6.60) Recommeded Chassis Cutout For Snap-In Sockets .156 DIA. (3.96) .208 2 HOLES (5.28) Dimensions are shown for reference purposes only. 1.270 (32.26) 1.375 (34.93) .239 (6.07) .065 TYP. (1.65) .281 (7.14) 1.395 (35.43) Recommended chassis thickness .031" (.79mm) to .062" (1.57mm). Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 729 Catalog 1308242 Issued 3-03 P&B Sockets For KU Series Relays Through 3 Poles (continued) 27E121 27E893 Screw Terminal Socket Screw Terminal, Din Rail Snap-Mount Socket (use with mounting track 24A110) The 27E121 socket offers screw termination for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187" (4.75mm) quick connect terminals. This socket stacks on 1.700" (43.18mm) centers. When surface mounting, two #6-32 screws of suitable length are required. When track mounting, two 24A071 retainer clips (not shown) are required. The 27E121 is rated 15 amps and is UL recognized, File E59244, CSA certified, File LR15734. The 27E893 DIN rail, snap-mount socket offers screw termination for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187" (4.75mm) quick connect terminals. This socket is constructed with a spring-loaded latch which allows it to be quickly snapped onto or removed from a "top hat" style mounting track. No special tools or extra hardware is required for installation. The 27E893 is UL rated 15 amps, 94V-0, File E59244 and CSA rated 10 amps, File LR15734. Terminal Location .895 MAX. (22.73) 1.700 .010 (43.18 .25) .850 .010 (21.59 .25) .540 (13.72) Terminal Location .315 MIN. (8.00) Top View 1.500 (38.10) .156 TYP. (3.96) 6 5 4 3 2 1 1.500 (38.10) 6 5 4 3 2 1 3.000 (76.20) .156 TYP. (3.96) 3.150 MAX. (80.01) B 9 1.450 MAX. (36.83) 1.900 MAX. (48.26) Top View 1.550 (39.37) 9 .317 TYP. (8.04) A 8 B 1.703 (43.26) 7 A 8 7 1.030 (26.16) .390 (9.91) #6-32 SCREWS & CAPTIVE WASHERS Sockets For KU Series 4 Pole Relays Socket Selection Table Stock items are boldfaced. For 4 pole KUP relays with .110" (2.79mm) quick connect termination. Socket Socket Termianation Hold-Down Spring 27E415 27E419 27E867* .187" (4.75mm) quick connect PC board Screw terminals 20C228 or 20C254 20C228 or 20C254 20C254 * Use 40G432 insulator pad or customer supplied alternative. .076 DIA. TYP. (1.93) Note: Only 4 pole KUP relays with .110" (2.79mm) quick Screw Terminal Socket For 4 Pole Relays .206 (5.23) 27E867 offers screw termination for 4 pole KUP relays with .110" (2.79mm) quick connect/socket mount terminals. Rated 10 amps and is UL recognized, File E59244. connect terminals can be used with 4 pole hard mount sockets. .328 (8.33) .50 TYP. (12.7) .165 .0 05 (4.19 .13) 2 HOLES .060 TYP. (1.52) 1.687 (42.85) 1.370 (34.80) 2.03 (51.6) 1.250 (31.75) .340 (8.64) .626 (15.90) .170 (4.32) .510 (12.95) 1.020 (25.91) .125 (3.18) .297 (7.54) .32 MAX. (8.1) W/QC TERMINALS .875 (22.23) 1.50 (38.1) Dimensions are shown for 730 reference purposes only. .250 (6.35) 27E415 uses same chassis cutout as 27E043. .156 DIA. (3.96) (2) MTNG. HOLES 5 1 2 6 3 4 8 .250 .010 #6-32 SCREWS (6.35 .254) .150 MAX. (3.81) + ++ ++ ++ ++ ++ + + ++ 9 A 10 7 11 B 12 2.750 .015 (69.96 .381) 27E415-with .187" (4.75mm) quick connect/solder terminals. 27E419-with printed circuit terminals. See PC board layout at right. Suggested Socket PC Board Layout 2.250 .010 (57.15 .254) Hard Mount Sockets For 4 Pole Relays + 1.750 .010 (44.45 .254) 3.50 .030 (88.9 .762) .230 .030 (5.84 .762) .062 REF. (1.57) .770 MAX. (19.56) .461 MAX. (11.71) W/PC TERMINALS Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KUP93 series General Purpose 3 to 10 Amp, Multicontact AC or DC Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features * AC coils 24, 120 & 240V 50/60 Hz.; DC 12 & 24VDC. * Contact arrangement to 3PDT. * Sockets available for all models. * Accepted pin pattern for HVAC industry. * Primarily designed for the HVAC industry. Nominal Voltage DC Resistance in Ohms 10%* Must Operate Voltage Nominal Coil Current (mA) DC Coils 12 24 120 472 9.0 18.0 100 51 AC Coils 24 120 240 72 1,700 7,200 20.4 102.0 204.0 115 24 12 *AC coils, 15% Contact Data @ 25C Material: Fine silver or silver-cadmium oxide. Operate Data @ 25C Contact Ratings Material UL/CSA Ratings Life Expected Fine silver 5A @ 28VDC or 240VAC, 80% PF, 1/10 HP @ 120VAC, 1/4 HP @ 240VAC Silvercadmium oxide 10A @ 28VDC or 240VAC, 80% PF, 1/4 HP @ 120VAC,1/3 HP @ 240VAC 10 FLA, 30 LRA @ 120VAC, 5 FLA,15 LRA @ 240VAC 100,000 Must Operate Voltage: DC Coils: 75% of nominal voltage or less. AC Coils: 85% of nominal voltage or less. Operate Time (Excluding Bounce): 15 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): DC Coils: 10 milliseconds, typical, at nominal voltage. AC Coils: 10 milliseconds, typical, at nominal voltage. 100,000 30,000 Environmental Data Temperature Range: Storage: All Coils: -45C to +105C. Operating: DC Coils: -45C to +70C. AC Coils: -45C to +45C. Initial Dielectric Strength Between Open Contacts: 500V rms. Between Adjacent Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms. Coil Data @ 25C Nominal Power: DC Coils: 1.2 Watts. AC Coils: 2.7VA. Initial Insulation Resistance: 100 megohms, min., at 25C. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: .187" x .020" quick connect. Enclosures: Clear polycarbonate dust cover. Weight: 3.0 oz. (86g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 731 Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B KUP93 11 A 2 1 -24 1. Type: KUP93 = Enclosed general purpose relay. 2. Contact Arrangement: 14 = 3 Form C (3PDT) 3. Coil Input: A = AC D = DC 4. Mounting: 1 = PLAIN CASE; 5. Terminals, Contact Material & Rating: 1 = .187" (4.75mm) quick connect, silver, 5 amps. 3 = .187" (4.75mm) quick connect, silver-cadmium oxide, 10 amps. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock the following items for immediate delivery. No items in this series typically are stocked. Outline Dimensions Wiring Diagrams 3 Form C 1.406 MAX. (35.71) .187 TYP. (4.75) C2 1.531 MAX. (38.89) 1.906 MAX. (48.41) 2 3 1 C1 .054 DIA. (1.37) .250 (6.35) KUP93 Sockets Socket PC Board Layout (Component Side of Board) .218 REF. (5.54) .205 DIA. (5.21) (2 HOLES) .276 (7.01) 2.350 (59.69) 1.308 (33.22) 1.858 (47.19) 5 6 4 8 9 7 MTG. HOLE .157 .003 (3.99 .08) .338 (8.58) .395 (10.03) .790 20.07 .062 (1.57) .737 (18.72) 1.858 (47.19) .710 (18.03) .790 (20.07) 1.250 (31.75) .100 (2.54) .469 .015 (11.91 .38) .465 (11.81) .161 .005 (4.09 .13) DIA. (2) HOLES .097 .004 (2.46 .10) DIA. (11) HOLES .317 (8.05) KUP93 Socket Number Socket Color P C Socket With Terminals Natural Nylon 27E168** **UL Recognized, file E22575 Socket: Rated 10 amperes. Will accept .187" (4.75mm) quick-connect terminals of all KUP93 relays. Dimensions are shown for 732 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RM series RM2/3/7 2/3 Pole 10/16 Amp RM5/6 VDE 3mm Contact Gap RM8 25 Amp File E214025 NR 5330, NR 5365, NR 5333 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. AC Coil Data @ 25C Features * Contact arrangements to 3PDT. DC DC Nominal Nominal Nominal Operate Drop-out Resistance Resistance Coil Coil Voltage Voltage Voltage in Ohms in Ohms Current Current VAC VAC VAC 10% 10% (mA) (mA) RM 2 RM 5 RM 2 RM 5 RM 3 RM 6 RM 3 RM 6 RM 7 RM 7 RM 8 RM 8 * Plug-in or PC terminals. * Push to test button and mechanical indicator. * RM 5/6 VDE approved with 3mm contact gap. Contact Data @ 25C Arrangements: RM 2/3/7: 2 Form C (DPDT) and 3 Form C (3PDT). RM 5/6: 2 Form A (DPST-NO) and 3 Form A (3PST-NO). RM 8: 2 Form C (DPDT). Material: Silver-cadmium oxide. Expected Mechanical Life: 20 million operations minimum. Contact Ratings: UL/CSA @ 25C RM 2/5: 16A, 250VAC G.P., 30,000 Ops. 16A, 28VDC G.P., 30,000 Ops. 1 HP, 120VAC G.P., 30,000 Ops. 1HP, 240VAC G.P., 30,000 Ops. RM 3/6: 10A, 250VAC G.P., 30,000 Ops. 10A, 28VDC G.P., 30,000 Ops. RM 3/6/7: 1 HP, 120VAC, 30,000 Ops. 1/2 HP, 240VAC, 480VAC, 600VAC, 30,000 Ops. 1.5 HP, 240VAC, 3 Phase, 30,000 Ops. RM 7: 16A, 250VAC G.P., 30,000 Ops. 16A, 10VDC G.P., 30,000 Ops. RM 8: 25A,. 240VAC, G.P., 30,000 Ops. 1.5 HP, 120VAC, G.P., 30,000 Ops. 2 HP, 240, G.P., 30,000 Ops. VDE @ 35C RM 2: 16A, RM 3/6: 10A, RM 5/7: 16A, RM 8: 25A, 400VAC, 400VAC, 400VAC, 250VAC, 06 12 24 48 60 115 230 400 4.8 9.6 19.2 38.4 48.0 92.0 184.0 320.0 2.4 4.8 9.6 19.2 24.0 46.0 92.0 160.0 5.3 24.0 86.0 345.0 544.0 2,000.0 8,300.0 27,500.0 4.7 19.5 80.0 320.0 500.0 1,850.0 7,500.0 23,500.0 381.7 182.5 94.2 47.5 37.8 20.6 10.1 5.8 476.7 225.8 109.2 54.2 43.7 23.0 11.7 6.5 Operate Data Must Operate Voltage: see coil data. Operate Time : Approximate ms RM RM RM 2/3/7 5/6 8 Pull-in 15 15 15 Drop Out 10 10 15 Bounce 3 4 3 Switching Rate: 1000 ops/hr max. at rated load. 100,000 Ops. 100,000 Ops. 100,000 Ops. 10,000 Ops. Initial Dielectric Strength Between Open Contacts: 1,500VAC (RM 5/6 2,500VAC). Between Coil and Contacts: 2,500VAC. Creepage/Clearance coil-contact: 6/3.5mm (RM 8 4/2.8). DC Coil Data @ 25C DC DC Nominal Nominal Nominal Operate Drop-out Resistance Resistance Coil Coil Voltage Voltage Voltage in Ohms in Ohms Current Current VDC VDC VDC 10% 10% (mA) (mA) RM 2 RM 5 RM 2 RM 5 RM 3 RM 6 RM 3 RM 6 RM 8 RM 7 RM 8 RM 7 06 12 24 48 60 110 221 4.5 9.0 18.0 36 45 82.5 165 Dimensions are shown for reference purposes only. 0.9 1.8 3.6 7.2 9.0 16.5 33 32 110 475 2,000 2,850 10,000 40,000 24 86 345 1,340 2,200 7,300 30,000 187.5 109.1 50.5 24.0 21.1 11.0 5.5 Dimensions are in inches over (millimeters) unless otherwise specified. 250.0 139.5 69.6 35.8 27.3 15.1 7.3 Environmental Data Temperature Range: Operating: -45C to maximum C listed below. RM2 RM3 RM5 RM6 RM7 RM8 DC Coil +70C +60C +60C +60C +60C +65C AC Coil +55C +55C +50C +50C +50C +40C Vibration: RM2/3/7: 30 to 150 Hz at 5g N/O, 2g N/C RM5/6: 30 to 150 Hz at 12g N/O. RM8: 30 to 150 Hz at 10g N/O, 5g N/C Specifications and availability subject to change. www.tycoelectronics.com Technical support: 733 Refer to inside back cover. Catalog 1308242 Issued 3-03 RM2/3/7 2/3 POLE 10/16A Contact Life SCHRACK Max. DC Load Breaking Capacity 7 10 E A: 1 contact B: 2 contacts in series C: 3 contacts in series D: RM 2, RM 7 E: RM 3 5 DC Current (A) 6 Operations D 16 10 10 A 1 C B 0.5 5 10 0.1 10 4 10 0 1 2 3 4 5 6 7 8 9 20 30 40 50 100 200 300 DC Voltage (VDC) 10 Breaking Capacity (kVA) AC Coil Operating Range 220 220 200 200 180 180 160 140 B A: RM 2 B: RM 3 C: RM7 C 120 A 100 Applied Coil Voltage % of Rated Nominal Applied Coil Voltage % of Rated Nominal DC Coil Operating Range 160 140 120 A 100 B A: RM 2, RM 3 B: RM 7 80 80 60 60 0 +20 +40 +60 +80 +100 0 +20 Ambient Temperature (C) +40 +60 +80 +100 Ambient Temperature (C) RM5/6 2/3 POLE 10/16A (Contact gap 3 mm) Max. DC Load Breaking Capacity Contact Life 16 10 7 DC Current (A) 10 Operations 6 10 C 5 1 A A: 1 contact. B: 2 contacts in series. C: 3 contacts in series. B 0.5 5 10 0.1 10 4 20 30 40 50 10 0 1 2 3 4 5 6 7 Breaking Capacity (kVA) 8 9 DC Coil Operating Range 200 300 AC Coil Operating Range 220 220 200 200 180 Applied Coil Voltage % of Rated Nominal Applied Coil Voltage % of Rated Nominal 100 DC Voltage (VDC) 10 160 140 120 100 80 180 160 140 120 100 80 60 60 0 +20 +40 +60 +80 +100 Ambient Temperature (C) Dimensions are shown for 734 reference purposes only. 0 +20 +40 +60 +80 +100 Ambient Temperature (C) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 RM8 2 POLE 25A Contact Life SCHRACK Max. DC Load Breaking Capacity 7 10 30 20 10 DC Current (A) Operations 6 10 5 10 5 1 A A: 1 contact. B: 2 contacts in series. B 0.5 4 10 0 1 2 3 4 5 6 7 Breaking Capacity (kVA) 8 9 0.1 10 10 20 30 40 50 100 DC Voltage (VDC) 200 300 DC Coil Operating Range 220 Applied Coil Voltage % of Rated Nominal 200 180 160 140 120 100 80 60 0 +20 +40 +60 +80 Ambient Temperature (C) +100 Ordering Information Typical Part Number B RM 2 3 2 024 1. Basic Series: RM = General purpose relay. 2. Contact Arrangement and Rating: 2 = 2 Form C (DPDT) 16 Amp 3 = 3 Form C (3PDT) 10 Amp 5 = 2 Form A (DPST-NO) 16 Amp 3mm Contact Gap 6 = 3 Form A (3PST-NO) 10 Amp 3mm Contact Gap 7 = 3 Form C (3PDT) 16 Amp 8 = 2 Form C (DPDT) 25 Amp (Available only with enclosure 5,8, and 9.) 3. Test: 0 = without push-to-test-button. 3 = with push-to-test-button. 4. Enclosure: 2 = Plain Case .187 (4.75mm) quick-connect (Not available with RM 8). 3 = Bracket Mount Case 0.187 (4.75mm) quick connect. (Not available with RM 8) 5 = Bracket Mount Case 0.250 (6.35mm) quick connect. 7 = Plain Case printed circuit (not available with RM8). 8 = Case with snap-on attachment on top 0.250 (6.35mm) quick-connect. 9 = Case with snap-on attachment on side 0.250 (6.35mm) quick-connect. 5. Coil Voltage: Standard with LED 006 012 024 048 060 110 220 006 L12 L24 L48 L60 M10 N21 with protection diode OA6 0B2 0C4 0E8 0G0 1B0 2C1 with LED and protection diode LA6 LB2 LC4 LE8 LG0 MB0 NC1 Standard =6VDC =12VDC =24VDC =48VDC =60VDC =110VDC =220VDC 506 512 524 548 560 615 730 900 with LED R06 R12 R24 R48 R60 S15 T30 V00 with with LED protection and diode protection diode -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- =6VAC =12VAC =24VAC =48VA =60VAC =115VAC =230VAC =400VAC Our authorized distributors are more likely to stock the following items for immediate delivery. RM202012 RM202024 RM202524 RM202615 RM203012 RM203024 RM203524 RM203615 Dimensions are shown for reference purposes only. RM205024 RM205524 RM205615 RM302012 RM302024 RM302524 RM302615 RM502024 RM502524 RM502615 RM602024 RM602524 Dimensions are in inches over (millimeters) unless otherwise specified. RM602615 RM702012 RM702024 RM702524 RM702615 RM703012 RM703024 RM703524 RM703615 RM805012 RM805024 RM805524 Specifications and availability subject to change. RM805615 www.tycoelectronics.com Technical support: 735 Refer to inside back cover. Catalog 1308242 Issued 3-03 Outline Dimensions RM .187 quick connect terminals 1.516 MAX. (38.50) SCHRACK RM .250 quick connect terminals, with brackets 1.398 MAX. (35.50) 1.516 MAX. (38.50) .157 (4.00) 1.909 MAX. (48.50) .059 (1.50) .303 (7.70) 2.520 (64.00) .020 (.50) .189 (4.80) 1.909 MAX. (48.50) 2.303 (58.50) 2.894 MAX. (73.50) RM with PCB terminals 1.516 MAX. (38.50) .248 (6.30) 1.398 MAX. (35.50) .059 (1.50) .031 (0.80) 1.398 MAX. (35.50) 2.185 MAX. (55.50) RM with snap-on attachment .157 (4.00) Wiring Diagrams (Bottom Views) RM2/8 2 Pole RM3/7 3 Pole (1) 12 - (4) 14 - (7) 11 + (A) A1 (3) 32 - (6) 34 - (9) 31 + (1) 12 (2) 22 (3) 32 (4) 14 (5) 24 (6) 34 (7) 11 (8) 21 (9) 31 (B) A2 (A) A1 RM5 2 Pole PC Board Layout (Bottom View) .240 (6.10) .079 DIA. TYP. (2.00) .469 (11.90) .795 (20.20) (B) A2 1.098 (27.90) RM6 3 Pole (4) 14 - (7) 11 + (6) 34 - (9) 31 + (4) 14 (A) A1 (B) A2 (A) A1 (5) 24 (6) 34 .429 (11.00) (7) 11 (8) 21 (9) 31 .858 (21.79) (B) A2 RM Sockets and Accessories RM78700/701 RM78702 .295 (7.50) RM78700 has QC Terminals RM78701 has Solder Terminals .295 (7.50) 2.03 (51.60) 1.299 (33.00) .744 (18.90) 2.03 (51.60) 1.280 (32.50) 1.677 (42.60) .441 (11.20) .165 (4.20) 1.488 (37.80) 1.488 (37.80) 1.071 (27.20) .433 (11.00) .437 (11.10) .866 (22.00) .866 (22.00) .165 (4.20) 1.677 (42.60) Hold-Down Spring RM28802 1.398 (35.50) RM78705 .630 (16.00) 16A, 250VAC, Socket with Screw Terminals 1.658 (42.20) Hold-Down Spring RM28802 1.041 (26.50) .984 (25.00) 1.398 (35.50) Socket Selection Table Stock items are boldfaced. Socket Socket Termination RM78700 RM78701 RM78702 RM78705 Dimensions are shown for 736 reference purposes only. .187(4.75)QC Terminals Solder Terminals .142(3.61)PCB Terminals Screw Terminals Hold-Down Spring 1.165 (4.20) RM28802 RM28802 RM28802 Dimensions are in inches over (millimeters) unless otherwise specified. 3.206 1.375 (81.60) (35.00) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KRPA, KRP, KA, KR series 5 to 10 Amp General Purpose Relay File E29244, E22575, E81558 (KR Hermetic) File LR15734 KRPA KRP KA Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength * * * * * Between Open Contacts: 500V rms. Between All Elements: 1,500V rms. Industry standard octal-type termination for quick installation. Contact arrangements from 1 Form C (SPDT) to 3 Form C (3PDT). Indicator lamp and push-to-test options available on certain models. The KRPA is the automated manufactured version of the KRP. Hermetically sealed option available with KR UL recognized for Class I Div. 2 Hazardous locations, Groups A, B, C, D. Coil Data @ 25C Nominal Power Contact Data @ 25C Arrangements: See Ordering Information Table. Materials: Silver or silver-cadmium oxide, with or without gold flashing. Expected Life: 10 million operations min., mechanical; 100,000 operations min. @ rated loads. KA, KRP, KRPA UL/CSA Contact Ratings @ 25C (Except KR) Contact Code Arrangement Y (Silver) Contact Rating 1, 2, 3 Poles G&N (Silver-Cad. Oxide) 5A @ 120VAC 3A @ 240VAC 1/10HP @ 120VAC 1/6HP @ 240VAC 1, 2, 3 Poles KR-E (Herm. Sealed) Contact Code 10A @ 240VAC 1/2 HP @ 240VAC 1/3HP @ 120VAC UL Contact Ratings @ 25C Class I, Div. 2, Hazardous Loc. Arrangement KRP KRPA KA 1, 2, 3 Poles 5A @ 120VAC 3A @ 240VAC 1/10HP @ 120VAC 1/6HP @ 240VAC G&N (Silver-Cad. Oxide) 1, 2, 3 Poles 10A @ 240VAC 1/6 HP @ 120VAC 2VA 1.2W 2VA 125mW per movable arm Enclosed Models - 4VA Enclosed Models - 3W Open Models - 4VA Open Models - 4W Duty Cycle: Continuous. Initial Insulation Resistance: KRP, KRPA - 1000 Megohms, min. KA - 100 Megohms, min. Coil Data @ 25C DC Coils Contact Rating Y (Silver) AC DC AC DC Maximum Power AC Coils Nominal Voltage DC Resistance () 10% Nominal Coil Current (mA) 6 12 24 48 110 220 6 12 24 120 240 32 120 472 1,800 10,000 188 100 51 26.6 11.5 Use 110V relay with 10,000 5W Resistor in series 6 24 85 2,250 9,110 335 168 84 17.5 8.75 Operate Data @ 25C KR-E (Herm. Sealed) Contact Code UL Contact Ratings @ 25C UL 508 Industrial Control Arrangement Y,G (Silver) Contact Rating 1, 2, 3 Poles KRP, KRPA 3A @ 120VAC 3A @ 28VDC 1/10HP @ 120VAC Factory Ratings Contact Code Arrangement Contact Rating Y 1, 2, 3 Poles 5A @ 28VDC, 120VAC, 80% PF G&N 1, 2, 3 Poles 10A @ 28VDC, 120VAC, 80% PF 6A @ 250VAC KA UL Contact Ratings Contact Code Must-Operate Voltage: DC: 75% or less of nominal voltage. AC: 85% or less of nominal voltage. Operate Time (Excluding Bounce): 15 milliseconds typical @ nominal voltage. Release Time (Excluding Bounce): 10 milliseconds typical @ nominal voltage. Series Temperature Range: Open Models: AC: -45C to +70C. DC: -45C to +85C. Enclosed Models: AC: -45C to +55C. DC: -45C to +70C. Contact Ratings Y KA1 5A @ 120VAC, 3A @ 240VAC, 1/10 HP @ 120VAC, 1/6 HP @ 240VAC G KA2 10A @ 120VAC, 6A @ 240VAC 1/6 HP @ 120VAC, 1/3 HP @ 240VAC 1Listed by C.S.A. for 5A @ 120VAC 80% PF 2Listed by C.S.A. for 10A @ 120VAC 80% PF Note: See KRPA, KRP, KA, KR-E Ordering Information table. Dimensions are shown for reference purposes only. Environmental Data Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Open Models: Solder terminals. Enclosed Models: Octal-type plug. Enclosures: Transparent polycarbonate (except KR). Hermetically sealed metal case available with KR only. Weight: KA: 1.7 oz. (48.2g) approximately. KRPA, KRP: 3.0 oz. (85g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 737 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B KRPA -5 A Y -120 1. Series: KRPA (Newer version, enclosed) KRP (Older version, enclosed) KR (Hermetically sealed option `E'only) KA (Open style) 2. Contact Arrangement: 5 = 1 Form C (SPDT) 11 = 2 Form C (DPDT) 14 = 3 Form C (3PDT) 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Contact Rating and Indicator Lamp Option: TYPE Codes Available KRPA KRP KR KA Y, G, N, Y, G, N, Y, G, Y, G, Leave Blank = Silver, no indicator lamp for hermetically sealed KR (option E below). Y = Silver, no indicator lamp G = Silver-cadmium oxide, no indicator lamp N = Silver-cadmium oxide, with indicator lamp* 5. Options: Leave Blank = No options (except KR). E = Hermetically Sealed Option (KR only). 6. Coil Voltage: Up to 240VAC Up to 125VDC *Indicator Lamp not available on 25-90V coils. Only 120-240VAC and 110VDC models are UL recognized and CSA certified. Our authorized distributors are more likely to stock the following items for immediate delivery. KA-5AG-120 KA-5AY-120 KA-5DG-6 KA-5DG-12 KA-5DG-110 KA-11AG-120 KA-11AY-6 KA-11AY-24 KA-11AY-120 KA-11DG-12 KA-11DG-24 KA-11DG-110 KA-14AG-120 KA-14AY-120 KA-14DG-24 KA-14DG-110 KR-11AE-120 KR-11AGE-120 KR-11DE-24 KR-11DGE-12 Dimensions are shown for 738 reference purposes only. KR-11DGE-24 KR-14AGE-120 KR-14DGE-24 KRP-5AG-120 KRP-11AG-24 KRP-11AG-120 KRP-11AG-240 KRP-11AN-24 KRP-11AN-120 KRP-11AY-120 KRP-11DG-12 KRP-11DG-24 KRP-11DG-48 KRP-11DG-110 KRP-11DG-125 KRP-11DN-12 KRP-11DN-24 KRP-11DY-24 KRP-14AG-120 KRP-14AG-240 KRP-14AN-120 KRP-14AY-120 KRP-14DG-12 KRP-14DG-24 KRP-14DG-110 KRP-14DN-24 KRPA-5AG-24 KRPA-5AG-120 KRPA-5AY-120 KRPA-5DG-6 KRPA-5DG-12 KRPA-5DG-24 KRPA-5DY-12 KRPA-5DY-24 KRPA-11AG-6 KRPA-11AG-12 KRPA-11AG-24 KRPA-11AG-120 KRPA-11AG-240 KRPA-11AN-12 Dimensions are in inches over (millimeters) unless otherwise specified. KRPA-11AN-24 KRPA-11AN-120 KRPA-11AN-240 KRPA-11AY-6 KRPA-11AY-12 KRPA-11AY-24 KRPA-11AY-120 KRPA-11AY-240 KRPA-11DG-6 KRPA-11DG-12 KRPA-11DG-24 KRPA-11DG-48 KRPA-11DG-110 KRPA-11DN-12 KRPA-11DN-24 KRPA-11DN-110 KRPA-11DY-12 KRPA-11DY-24 KRPA-14AG-12 KRPA-14AG-24 Specifications and availability subject to change. KRPA-14AG-120 KRPA-14AG-240 KRPA-14AN-24 KRPA-14AN-120 KRPA-14AN-240 KRPA-14AY-24 KRPA-14AY-120 KRPA-14AY-240 KRPA-14DG-12 KRPA-14DG-24 KRPA-14DG-48 KRPA-14DG-110 KRPA-14DN-24 KRPA-14DY-24 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KRP-3-H series 20 Amp Small AC or DC Relays File E22575 KRP-3-H Features Coil Data @ 25C * 1 Form X (SPST - NO - DM) contact rating of 20A. * Heavy copper alloy movable contact arms. * Twin silver-cadmium oxide contacts. * Many uses in automation controls and other applications requiring high current switching. See chart on page 105. Nominal Power: DC Coils: 1.2W AC Coils: 2.0VA Initial Insulation Resistance: 1,000 megohms. Operate Data @ 25C Contact Data @ 25C Must-Operate Voltage: DC: 75% of nominal voltage. AC: 85% of nominal voltage. Operate Time: 15 milliseconds approximate (Excluding Bounce). Release Time: 10 milliseconds approximate (Excluding Bounce). Arrangement: 1 Form X (SPST - NO - DM). Ratings: UL Rating: 20A @ 120VAC, 3/4 HP @ 120VAC. Factory Rating: 20A @ 120VAC, 80% PF; 1 HP @ 120/240VAC. Material: Twin, silver-cadmium oxide. Expected Life: 2.5 million operations min., mechanical. 100,000 operations at rated contact load. Environmental Data Temperature Range: Enclosed Models: AC: -45C to +55C. DC: -45C to +70C. Initial Dielectric Strength Between Open Contacts: 500V rms, 60 Hz. between all elements. Mechanical Data Mounting: Socket mounting. Termination: Octal-type plug. Enclosure: Polycarbonate enclosure with octal-type mounting. Weight: 2 oz. (57g) approximately. Ordering Information Typical Part No. B KR P -3 D H -12 1. Basic Series: KR 2. Type: P = Enclosed (20 amp models available only with Contact Arrangement 3 and Material H.) 3. Contact Arrangement: 3 = 1 Form X (SPST - NO - DM) 4. Coil Input: A = AC D = DC 5. Contact Material & Rating: H = Silver-cadmium oxide, 1/4" (6.35mm) dia., 20 amps. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock the following items for immediate delivery. KRP-3AH-120 KRP-3DH-24 KRP-5AG-120 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 739 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions KA Series 1.375 MAX. (34.93) 1.468 MAX. (37.29) .25 (6.4) 1.06 MAX. .44 (26.9) (11.2) 1.92 MAX. (48.8) 1 STUD #6-32 THREAD .15 (3.8) .312 (7.92) Tolerances on .XX Decimals .02 ( .5) Unless Otherwise Specified Tolerances on .XXX Decimals .005 ( .13) Unless Otherwise Specified KR Series Enclosures Type "P" Clear Dust Cover For KRPA and KRP For KRP3-H 1.531 MAX. (38.89) 1.406 MAX. (35.71) 1.406 MAX. (35.71) 2.0 MAX. (50.8) 2.281 MAX. (57.94) 1.406 MAX. (35.71) .031 (.79) Hermetically Sealed Enclosure Hold-Down Spring (KR only) 20C176 KRPA & KRP 20C206 KAP and KRP3 Durable stainless steel spring can be moved aside for relay removal or installation. Mounts with same machine screws or rivets that secure socket to chassis. Two .156" (3.96mm) dia. holes required. Octal Plug 1.656 (53.98) 1.437 (36.50) Height: 2.125" (53.98mm) max. Wiring Diagrams (Bottom Views) KA 8 6 5 Dimensions are shown for 8 1 7 740 reference purposes only. KR11 KAP11 KRP11 KRPA11 KR5 KAP5 KRP5 KRPA5 4 2 7 3 6 1 10 2 3 5 Dimensions are in inches over (millimeters) unless otherwise specified. KR14* KAP14 KRP14 KRPA14 4 11 1 KRP3AH 8 2 9 3 8 4 7 6 5 Specifications and availability subject to change. 1 7 2 * The hermetically sealed KR14 has pins 5 and 6 reversed. 3 6 5 4 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Sockets For KRP, KRPA Series Relays The following sockets are normally maintained in stock for immediate delivery. Screw Terminal, DIN Rail Snap-Mount Sockets (Use with mounting track 24A110) 27E891 10A, 300VAC Terminal Location Terminal Location 27E892 10A, 300VAC Top View Top View 1.295 (32.89) 2 1 8 7 2.060 (52.32) 1 1.005 (25.53) 11 2 1.018 (25.84) 10 3 2.010 (51.05) 9 2.035 (51.69) .165 (4.19) DIA.TYP. 3 .312 TYP. (7.92) 4 5 .580 (14.73) .165 (4.19) DIA.TYP 6 4 8 6 .312 TYP. (7.92) .580 (14.73) 2.332 (59.22) 1.575 (40.01) 7 5 .770 (19.56) .970 (24.64) .970 (24.64) Sockets have M3.5 screw terminals which accept up to two #12 AWG wires. Rated 10 amps @ 300VAC and meets UL 94V-0. Screw Terminal Sockets 27E123 10A, 300VAC 11-pin 27E122 10A, 300VAC 8-pin 1.296 (32.92) 2.060 (52.32) .648 (16.46) 1.030 (26.16) .156 TYP. (3.96) .062 (1.57) 1.188 (30.18) 2.385 MAX. (60.58) .093 (2.36) .781 (19.84) .156 DIA. TYP. (3.96) .210 TYP. (5.33) 1.572 MAX. (39.93) + + 1.188 (30.18) = 6-32 SCREWS & CAPTIVE WASHERS 1.156 (29.36) = 6-32 SCREWS & CAPTIVE WASHERS 6 5 4 .925 MAX. (23.50) 3 Terminal Location 7 8 1 8 7 6 5 4 2 3 2 9 10 11 1 Dimensions are shown for reference purposes only. .210 TYP. (5.33) .093 (2.36) 2.322 MAX. (58.98) .925 MAX. (23.50) Terminal Location .062 (1.57) .156 TYP. (3.96) 2.385 MAX. (60.58) 1.296 (32.92) .648 (16.46) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 741 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK MT series 10 Amp General Purpose Relay File E214025 NR 6182 NR 95.1, 10956.02 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * DPDT or 3PDT contact arrangements. Must Operate Voltage: See Coil Data table. Operate Time: 12 ms typical, at nom. voltage. Release Time: 5 ms typical, at nom. voltage. Bounce Time: 4 ms typical, at nom. voltage. Switching Rate: 1,200 ops./hr. max. at rated load. 4 amp bifurcated contact available. AC and DC coils. Protection Diode available (DC coils). Mechanical indicator - all models. Electrical indicator available. Test actuator with front operated finger protected push to test button and integral locking test tab. Contact Data @ 25C Arrangements: 2 Form C (DPDT). 3 Form C (3PDT. Material: 10 amp; Silver-nickel 90/10 with or without gold plating. 4 amp; Silver-nickel 90/10 with gold plating. Expected Mechanical Life: 20 million operations minimum. Ratings: UL/CSA NO/NC @ 25C: 4 amp (Bifurcated) 250VAC Resistive 30,000 ops. 10 amp 240VAC Resistive 30,000 ops. 1/2 HP 240VAC 30,000 ops. 1/4 HP 120VAC 30,000 ops. B300 Pilot duty 30,000 ops. VDE @ 35C: 10 amp 250VAC Resistive 100,000 ops., DC Coil, AC Coil N/O. 20,000 ops., AC Coil N/C. Environmental Data Temperature Range: Operating: -45C to +60C DC coil. -45C to +50C AC coil. Vibration: 30 to 1,500 Hz. at 5g N/O, 2g N/C. Shock: 50g N/O, 10g N/C. Electrical Life 107 250VAC Resistive Load 106 Operations * * * * * * 105 104 0 Initial Dielectric Strength 4 2 6 8 10 12 14 16 Switching Current (A) Between Open Contacts: 1,500VAC. Between Coil and Contacts: 2,500VAC. Between Poles: 2,500VAC. Creepage/Clearance Coil-Contact: 4/2.8mm. Max. DC Load Breaking Capacity 50 Nominal Coil Power: 1.2W, 2.3VA. DC Data Nominal Voltage VDC DC Resistance in Ohms 10% Must Operate Voltage VDC Must Release Voltage VDC Nominal Coil Current (mA) 06 12 24 48 60 110 220 32 110 475 2,000 2,850 10,000 40,000 4.5 9 18 36 45 82.5 165 0.6 1.2 2.4 4.8 6.0 11.5 22.0 187.5 109.1 50.5 24.0 21.1 11.0 5.5 10 DC Current (A) Coil Data @ 25C 5 2 A B 1 A: 1 contact. B: 2 contacts in series. C: 3 contacts in series. C 0.5 0.1 10 20 30 40 50 100 200 300 DC Voltage (V) Coil Operating Range 2.2 2.0 AC Data DC Resistance in Ohms 10% Must Operate Voltage VAC Must Release Voltage VAC Nominal Coil Current (mA) 06 12 24 48 60 115 230 5.3 24 86 345 544 2,000 8,300 4.8 9.6 19.2 38.4 48 92 184 2.4 4.8 9.6 19.2 24 46 92 381.7 182.5 94.2 47.5 37.8 20.6 10.1 Dimensions are shown for 742 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 1.8 UB/UN Nominal Voltage VAC 1.6 A: DC coil. B: AC coil. A 1.4 1.2 B 1.0 0.8 0.6 0 +20 +40 +60 +80 Ambient Temperature (C) Specifications and availability subject to change. +100 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B MT 3 2 1 012 1. Basic Series: MT = General purpose relay. 2. Contact Arrangement: 2 = 2 Form C (DPDT) 8 pin 3 = 3 Form C (3PDT) 11 pin 3. Contact Material: 2 = Silver Nickel 90/10 with mechanical actuator. 3 = Silver Nickel 90/10, gold plated, with mechanical actuator. B = 4 amp Silver Nickel 90/10 bifurcated contact with gold plating. 4. Test: 1 = DC coil with test-button. 3 = DC coil with test-button and LED. 6 = AC coil with test-button. 8 = AC coil with test-button and LED. 5. Coil Voltage: Standard With protection diode Standard With protection diode 006 = 6VDC 0A6 = 6VDC 006 = 6VAC N/A 012 = 12VDC 0B2 = 12VDC 012 = 12VAC N/A 024 = 24VDC 0C4 = 24VDC 024 = 24VAC N/A 048 = 48VDC 0E8 = 48VDC 048 = 48VAC N/A 060 = 60VDC 0G0 = 60VDC 060 = 60VAC N/A 110 = 110VDC 1B0 = 110VDC 115 = 115VAC N/A 220 = 220VDC 2C0 = 220VDC 230 = 230VAC N/A Our authorized distributors are more likely to stock the following items for immediate delivery. MT226024 MT226115 MT226230 MT321012 MT321024 MT326024 MT326115 MT326230 Wiring Diagrams (Bottom Views) 2.717 MAX. (69.01) MT Sockets and Accessories MT78750 MT78755 10A, 400VAC 11 Pin Socket 10A, 400VAC 8 Pin Socket M3 34 32 24 22 14 12 9 8 7 5 3 4 M3 100 10 11 4 1 2 24 22 12 14 6 5 4 3 1.272 (32.30) M3 100 7 8 1 2 A2 21 11 A1 .366 (9.30) .157 (4.00) M3 1.102 (28.00) 2.441 MAX. (62.0) .902 (22.9) A2 31 21 11 A1 1.220 (31.00) .366 (9.30) .157 (4.00) 1.024 (26.00) 1.024 (26.00) Hold-Down Spring MT28800 Hold-Down Spring MT28800 Dimensions are shown for reference purposes only. Mounting Hole Centers 1.102 (28.00) 2.441 MAX. (62.0) .953 (24.2) .059 (1.50) 1.496 MAX. (38.0) Mounting Hole Centers .059 (1.50) 1.496 MAX. (38.0) 2.244 MAX. (57.00) 1.398 MAX. (35.50) (5)22 (6)24 (7)A2 (8) 21 (4)12 (3)14 (2)A1 (1) 11 1.398 MAX. (35.50) (6) (7) (5) 21 24 22 (8)32 (4)12 (3)14 (9)34 (10) (2) (1) (11) A2 A1 11 31 Outline Dimensions MT221012 MT221024 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 743 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK MT Sockets and Accessories (continued) Module-capable Sockets MT78745 MT78740 10A, 400VAC 8 Pin Socket 10A, 400VAC 11 Pin Socket 1.496 MAX. (38.0) .118 (3.00) 22 12 14 6 5 4 3 .126 DIA. (3.2) 2.95 (75.0) 1.496 MAX. (38.0) 24 7 7 A2 A2 1.024 (26.00) 2.76 (70.0) 9 8 7 5 3 4 .22 (5.6) .394 (10.0) .394 34 32 24 22 14 12 .126 DIA. (3.2) 2.44 (62.0) 8 1 2 21 11 A1 .165 DIA. (4.2) 1.18 (30.0) .22 (5.6) 10 10 11 4 1 2 .165 DIA. (4.2) A2 A2 31 21 11 A1 1.18 (30.0) Socket Selection Table Timing Module Selection Table Stock items are boldfaced. Stock items are boldfaced. Socket Socket Type and Termination Hold-Down Spring Module Type MT78750 MT78755 MT78740 MT78745 11-pin, DIN Rail w/ Screw Terminals 8-pin, DIN Rail w/ Screw Terminals 11-pin, module-capable, DIN Rail w/ Screw Terminals 8-pin, module-capable, DIN Rail w/ Screw Terminals MT28800 MT28800 MT28800 MT28800 MTMZ0W00 MTMF0W00 Delay ON timing module Multifunction timing module LED and Protection Module Selection Table Stock items are boldfaced. Module Type MTMT00A0 MTMU0524 MTMU0730 MTML0024 MTML0615 Protection diode 1N4007 RC-network 24 - 115 VAC RC-network 230 VAC LED 24 VAC / VDC LED 115 VAC Timing Function Diagrams Timing Module Functional Data Nominal Voltage: 24 - 240 VAC / VDC Frequency: 48 - 63 Hz. Precision of Time Setting: 0.5%. Readiness for Repetition: 0.5% or 5 ms. Influence of Temperature: 0.1% /C. Time Range Switchable: 0.05 s - 240 h in 8 ranges. Ambient Temperature: -25C to +55C. Delay ON U/t R U/t Delay OFF S R U/t Single shot leading edge S R U/t Single shot trailing edge S R U/t Single shot S R U/t Delay ON triggered by signal contact R U/t Flasher starting with pause R U/t Flasher starting with pulse Dimensions are shown for 744 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. R www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0419 series 16 Amp RAST 5 Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * * * * * * * Temperature Range: Operating: -20C to +90C. Vibration: (5 to 500 Hz.) 2g. Shock (destruction): 80g. 2 Form A (DPST-NO). 16 amp rated current. Compatible with RAST 5 connector. Contact gap exceeds 3 mm; 4kV/8mm contact-to-coil spacing. Designed for European domestic appliances. Snap-in or screw mounting. Dust cover. Mechanical Data Contact Data Termination: Rast 5. Enclosure: Plastic dust cover. Weight: 3.2 oz. (90 g) approximately. Arrangements: 2 Form A (DPST-NO). Material: Silver-cadmium oxide or silver-nickel. Expected Mechanical Life: 2 million operations. Ratings: Current: 16A. Voltage: 250VAC. Power (breaking): 4,000 VA. Voltage (breaking): 400VAC. Current (making, max. 4s at 10% duty cycle): 25A. AC Coil Models 16 amp resistive, 250VAC, 100,000 ops. 12 amp resistive, 250VAC, 100,000 ops. DC Coil Models 16 amp resistive, 250VAC, 250,000 ops. 12 amp resistive, 250VAC, 250,000 ops. Contact Life Initial Dielectric Strength Between Open Contacts: 2,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20C Nominal Coil Power: AC Coils: 2.0-2.5 VA; DC Coils: 1.3W. DC Resistance in Ohms 10% DC Coils 12 118 24 470 AC Coils (50 Hz) 110-120 1,650 220-240 6,600 380-400 20,000 Must Operate Voltage VDC Drop-out Voltage VDC Maximum Voltage VDC Nominal Coil Current (mA) 7.7 15.5 0.9 1.8 19.5 39.0 102.0 51.0 93.0 187.0 323.0 18.0 36.0 60.0 132.0 264.0 440.0 20.0 10.0 6.0 Coil Operating Range Applied coil voltage (U/Un) Nominal Voltage VDC Nominal coil voltage (Un) Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 15 ms. Release Time (typical): 15 ms. Bounce Time (typical): 4 ms. Switching Rate: 9,000 ops./hr. max. at rated load. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 745 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number 1. Basic Series: 0419 01= Power relay with RAST 5 connection. 2. Coil Voltage: 31 = 12VDC 29 = 24VDC 14 = 110-120VAC 3. Contact Material: 01 = Silver-cadmium oxide. 03 = Silver-nickel 90/10 4. Mounting: 00 = Snap mounting, 1.0 mm panel 01 = Snap mounting, 1.5 mm panel 02 = Screw mounting B 0419 01 10 = 220-240VAC 14 01 00 09 = 380-400VAC Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions and Wiring Diagrams .602 (15.3) .405 (10.3) .047 [.067] .295 (1.2 [1.7]) (7.5) 1.06 .004 (27 .1) .374 .157 (9.5) (4) 1.90 - .008 (48.2 - .2) .197 (5) .602 (15.3) .85 - .004 (21.6 - .1) .567 + .004 (14.4 + .1) .177 [.197 (4.5 [5.0]) .85 - .004 (21.6 - .1) .030 [.043] (.75 [1.1]) .039 (1) 1.85 (47) 1.85 (47) .165 .004 (4.2 .1) .157 (4) .433 (11) .433 (11) .079 (2) .473 (11.5) .051 (1.3) 1.48 (37.6) 1.85 + .008 (47 + .2) .984 .004 (24 .1) .075 (1.9) Dimensions are shown for 1.48 (37.6) 1.85 + .008 (47 + .2) .075 (1.9) .650 .004 (16.5 .1) .984 .004 (24 .1) Screw Mount Version Snap Mount Version 746 reference purposes only. .051 (1.3) .216 .473 (5.5) (11.5) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B DIN Rail Mount Screw Terminal Socket Track Mounting System File E59244 File LR35144 Features Location of Socket Dimensions * * * * Sockets mount on standard 35mm DIN track & P&B "top hat" track. Spring loaded integral clip holds sockets securely to the track. Small screwdriver can be used to release sockets from track. Any available hold-down springs must be ordered separately. See Relay & Socket Usage Chart beginning on page 747. * End clips can be used to further stabilize sockets on track. Typical Relay Base Socket Part Number Page KRPA (DPDT) KRPA (3PDT) KUP KH, PCL K10, PCLH RT (code 1) RT (codes 3 & 5) MT (DPDT) MT (3PDT) RM PT (DPDT) PT (3PDT) PT (4PDT) 8-pin octal-type 11-pin octal-type 11-blade square 14-blade square 8-blade square 5-blade square 8-blade square 8-pin octal-type 11-pin octal-type 11-blade square 8-blade square 11-blade square 14-blade square 27E891 27E892 27E893 27E894 27E895 RT78624 RT87625 MT78755 MT78750 RM78705 PT78702 PT78703 PT78704 741 741 730 712 722 452 452 743 743 736 719 719 719 24A110 - DIN Rail Style Mounting Track 24A110 mounting track is designed to accept snap-mount sockets, as well as all other P&B screw terminal sockets. Track is made of lightweight, sturdy extruded aluminum and is shipped in three-foot (914cm) lengths with mounting holes on six-inch (152mm) centers. Track can be cut to shorter lengths or used end-to-end. 3.00 (76.2) .750 (19.05) 6.00 (152.4) 36.00 .060 (914.4 1.52) .187 (4.75) 1.375 .010 (34.93 .254) .405 .0 07 (10.29 .178) 24A071 & 40G432 - End Clip 24A071 steel mounting clip with one #6-32 screw 7/16" (11.1mm) long is used with a 40G432 insulator to prevent sockets from moving sideways or sliding off the end of the track. 40G432 24A071 Our authorized distributors are more like to stock the items listed below in boldface. Part Number 24A110 24A071 40G432 Dimensions are shown for reference purposes only. Description DIN rail style extruded aluminum mounting track for DIN or standard sockets. Steel mounting clip with one #6-32 screw 7/16" (11.1mm) long. Use with 40G432 below to make end clip. Plastic insulator. Use with 24A071 above to make end clip. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 747 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 27E867 27E462 27E461 27E460 27E122 27E123 27E487 27E121 27E166 24A071 & 40G432 24A071 24A071 & 40G432 24A072 24A071 Conventional Screw Terminal Socket Track Mounting Sytem Features Track & Mounting Accessories *P&B DIN rail track accommodates a variety of sockets and relays. See Relay & Socket Usage Chart beginning on page 747. *Various clips are available to secure components to track. Location of Socket Dimensions 24A110 Typical Relay Base Socket Part Number Page K10 KH KUP (3PDT) KRPA (3PDT) KRPA (DPDT) R10 (DPDT) R10 (4PDT) R10 (6PDT) KUP (4PDT) 8-blade square 14-blade square 11-blade square 11-pin octal-type 8-pin octal-type 10-blade square 16-blade square 22-blade square 14-blade square 27E487 27E166 27E121 27E123 27E122 27E460 27E461 27E462 27E867 722 712 730 741 741 708 708 708 730 40G432 24A072 24A071 Our authorized distributors are more like to stock the items listed below in boldface. Part Number Description 24A110 DIN rail style extruded aluminum mounting track 36" (914mm) long with holes on 6.0" (152.4mm) centers. Holes accept #8 screws. 24A071 Steel mounting clip with one #6-32 screw 7/16" (11.1mm) long. 24A072 Plastic twist mounting clip for 27E166, 27E122 and 27E123 sockets. Twist clip into track to hold socket in place, except when used on end of track. Use 24A071 on ends of track to lock first and last socket in place. 40G432 Plastic insulator for track or surface mounting. Use with 27E460, 27E461, 27E462 and 27E867 sockets. Track Mounting System - Chart below lists typical applications. See Relay & Socket Usage Chart on following pages for more detail. Socket Typ. Relay 27E121 KUP 27E122 Component Hold Down Spring 24A110 Track Mounting Hardware Chassis Mounting Hooks into slots below mounting ears. Two hold downs required per socket. 24A071 36" (914cm) strip will mount 19 sockets. Two suitable screws on 1.7" (43.2mm) centers. KRPA See Socket Usage Chart. 24A071 24A072 36" (914cm) strip will mount 22 sockets. Two suitable screws on 1.296" (32.92mm) centers. 27E123 KRPA See Socket Usage Chart. 24A071 24A072 36" (914cm) strip will mount 15 sockets. Two suitable screw on 1.296" (32.92mm) or 2.06" (52.3mm) centers. 27E166 KHAU 20C297 Hooks into slots on side of socket body. One hold down required per socket. 24A071 36" (914cm) strip will mount 30 sockets. Two suitable screws on .94" (23.9mm) centers. 27E460 27E461 27E462 R10 20C249 20C250 20C251 Hooks into slots on side of socket body. One hold down required per socket. 24A071 40G432 36" (914cm) strip will mount 16 27E460, 12 27E461 or 9 27E462 sockets. Two 40G432 insulators and two suitable screws on 1.8" (45.7mm), 2.125" (53.98mm) or 2.812" (71.42mm) centers. 27E487 K10 20C297 Hooks into slots on side of socket body. One hold down required per socket. 24A071 24A072 36" (914cm) strip will mount 31 sockets. 24A072 can be used on small ear only. Two suitable screws on 1.143" (29.03mm) centers. 27E867 KUP (4PDT) 20C254 Hooks into slots on side of socket body. One hold down. 24A071 40G432 36" (914cm) strip will mount 13 sockets. Two 40G432 insulators and two suitable screws on 2.25" (57.15mm) centers. Dimensions are shown for 748 reference purposes only. 20C314 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAY SOCKET USAGE CHART Relay and Socket Usage Chart Relay Socket Terminal Type Hold-Down Spring Notes Socket Page 48K (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 48K (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CB (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 CB (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CD (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 CD (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CG (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 CG (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CH (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 CH (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CK (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 CK (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CL-41 & CL-44 27E043 Screw 20C228 or 20C254 -- 729 27E046 PC 20C228 or 20C254 -- 729 27E067 QC & Solder 20C228 or 20C254 -- 729 27E121 27E396 27E893 Screw QC & Solder Screw 20C314 20C254 20C318 -- -- 5 730 729 730 CL-51 27E043 27E046 27E067 27E121 27E396 27E893 Solder PC QC & Solder Screw QC & Solder Screw 20C247 20C247 20C247 20C314 -- -- -- -- -- 5 729 729 729 730 729 730 CN1 (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 CNM5 (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CNS (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 CNS (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CNT (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 CR (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 CS (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: 20C318 Comments 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. Use 2 pieces 20C314 per socket. 20C247 held in place by socket hold down screw. 20C247 held in place by socket hold down screw. 20C247 held in place by socket hold down screw. Use 2 pieces 20C314 per socket. Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above. Listed hold-down springs cannot be used for R10S. On R10L series hold down spring fits to the side of light emitting diode. Use 40G432 insulator or suitable insulator (2 per socket). Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware. 27E893 cannot be used with KUIP and KUGP series relays. Relay and Socket Usage Chart continued on next page. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 749 Catalog 1308242 Issued 3-03 RELAY SOCKET USAGE CHART Relay and Socket Usage Chart Relay Socket Terminal Type Hold-Down Spring Notes Socket Page CU-41 & CU-44 27E043 Solder 20C228 or 20C254 -- 729 27E046 PC 20C228 or 20C254 -- 729 27E067 QC & Solder 20C228 or 20C254 -- 729 27E396 27E400 27E121 27E893 QC & Solder Solder Screw Screw 20C254 20C254 20C314 20C318 -- -- -- 5 729 729 730 730 CU-51 27E043 27E046 27E067 27E121 27E396 27E893 Solder PC QC & Solder Screw QC & Solder Screw 20C247 20C247 20C247 20C314 20C318 -- -- -- -- -- 5 729 729 729 730 729 730 GP CR0001 CR0002 CR0067 CR0095 Screw Screw Screw Screw CR0111 or CR0133 CR0111 or CR0133 CR0069 CR0070 or CR0155 -- -- -- -- 920 920 920 920 -- -- -- -- -- Refer to page 1114 for I/O modules mounting board details. Refer to page 1122 for Slim Line I/O modules mounting board details. IAC & IDC -- -- -- -- -- K10 27E487 27E488 27E489 27E895 Screw Solder PC Screw 20C426 20C217 20C217 20C426 -- -- -- 5 722 722 722 722 KBP (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 KH & KHA (type-P,S,U,X) 27E006 27E007 27E023 27E166 27E894 Solder PC PC Screw Screw 20C217 20C217 20C217 20C297 20C426 -- -- -- -- 5 712 712 712 712 712 KR Sealed (8-pin octal) 27E122 27E891 Screw Screw -- -- -- 5 741 741 KR Sealed (11-pin octal) 27E123 27E892 Screw Screw -- -- -- 5 741 741 KRP3-H (8-pin octal) 27E122 27E891 Screw Screw -- -- -- 5 741 741 KRP & KRPA (8-pin octal) 27E122 27E891 Screw Screw -- -- -- 5 741 741 KRP & KRPA (11-pin octal) 27E123 27E892 Screw Screw -- -- -- 5 741 741 KUEP, KUGP, KUIP, KUMP & KUP [1-3 poles with .187" (4.75mm) QC] 27E043 Solder 20C228 or 20C254 -- 729 27E046 PC 20C228 or 20C254 -- 729 27E067 QC & Solder 20C228 or 20C254 -- 729 27E121 27E396 27E400 27E893 Screw QC & Solder Solder Screw 20C314 20C254 20C254 20C318 -- -- -- 5, 6 730 729 729 730 27E043 27E046 27E067 27E121 27E396 27E893 Solder PC QC & Solder Screw QC & Solder Screw 20C247 20C247 20C247 20C314 -- -- -- -- -- 5 729 729 729 730 729 730 IACM & IDCM KUL with .187" (4.75mm) QC] Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: 20C318 Comments 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. Use 2 pieces 20C314 per socket. 20C247 held in place by socket hold down screw. 20C247 held in place by socket hold down screw. 20C247 held in place by socket hold down screw. Use 2 pieces 20C314 per socket. 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. Use 2 pieces 20C314 per socket. 20C247 held in place by socket hold down screw. 20C247 held in place by socket hold down screw. 20C247 held in place by socket hold down screw. Use 2 pieces 20C314 per socket. Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above. Listed hold-down springs cannot be used for R10S. On R10L series hold down spring fits to the side of light emitting diode. Use 40G432 insulator or suitable insulator (2 per socket). Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware. 27E893 cannot be used with KUIP and KUGP series relays. Relay and Socket Usage Chart continued on next page. Dimensions are shown for 750 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAY SOCKET USAGE CHART Relay and Socket Usage Chart Relay Socket Terminal Type Hold-Down Spring Notes Socket Page KUP [4 pole with .110" (2.79mm) QC] 27E415 QC & Solder 20C228 or 20C254 -- 101 27E419 PC 20C228 or 20C254 -- 101 27E867 Screw 20C254 4 101 27E006 27E007 27E023 27E166 27E894 Solder PC PC Screw Screw -- -- -- -- -- -- -- -- -- 5 712 712 712 712 712 MT MT78750 MT78755 MT78740 MT78745 Screw Screw Screw Screw MT28800 MT28800 MT28800 MT28800 -- -- -- -- 743 743 744 744 ML CR0001 CR0002 CR0067 CR0095 Screw Screw Screw Screw CR0111 or CR0133 CR0111 or CR0133 CR0069 CR0070 or CR0155 -- -- -- -- 920 920 920 920 MD0 Comments 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. For relays with 11-pin bases. For relays with 8-pin bases. For relays with 11-pin bases. Will accommodate function modules. For relays with 8-pin bases. Will accommodate function modules. OAC & ODC -- -- -- -- -- Refer to page 1114 for I/O module mounting board details. OACM & ODCM -- -- -- -- -- Refer to page 1122 for Slim Line I/O modules mounting board details. ORWH 27E1064 PC -- -- 439 PCE 27E1064 PC -- -- 437 PT 27E006 27E220 27E023 27E894 PT78700 PT78702 PT78703 PT78704 Solder PC PC Screw Screw Screw Screw Screw -- -- -- -- -- -- -- -- -- -- -- 5 5 5 5 5 719 719 719 719 719 719 719 719 Will accommodate 2- or 4-pole models. For use with 2-pole models. For use with 4-pole models. Will accommodate 2- or 4-pole models. Will accommodate 2- or 4-pole models. For 2-pole relays. Will accommodate function modules. For 3-pole relays. Will accommodate function modules. For 4-pole relays. Will accommodate function modules. R10, R10L & R10S (2 pole) 27E125 27E162 27E128 27E446 27E193 27E212 27E342 27E317 27E460 Solder Solder PC Stag. Solder PC Stag. PC Stag. PC In-Line Solder/Bkt. Mt. Screw 20C249 20C249 20C249 or 20C259 20C249 20C249 or 20C259 20C249 or 20C259 20C249 or 20C259 20C249 20C249 or 20C259 2, 3 2, 3 2, 3 1, 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3, 4 707 707 707 707 707 707 707 708 708 Tin plated terminals with grounding strip. Tin plated terminals no grounding provision. Tin plated terminals with grounding strip. Tin plated terminals with grounding strip. Tin plated terminals with grounding terminals. Tin plated terminals no grounding provision. Tin plated terminals no grounding provision. Tin plated terminals with grounding strip. Tin plated terminals no grounding provision. R10, R10L & R10S (4 pole) 27E126 27E163 27E129 27E194 27E213 27E629 27E461 Solder Solder PC Stag. PC Stag. PC Stag. PC In-Line Screw 20C250 20C250 20C250 20C250 or 20C259 20C250 or 20C259 20C250 or 20C259 20C250 or 20C259 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3, 4 707 707 707 707 707 707 708 Tin plated terminals with grounding strip. Tin plated terminals no grounding provision. Tin plated terminals with grounding strip. Tin plated terminals with grounding terminal. Tin plated terminals no grounding provision. Tin plated terminals no grounding provision. Tin plated terminals no grounding provision. R10 & R10L (6 pole) 27E127 27E130 27E630 27E462 Solder PC Stag. PC In-Line Screw 20C251 20C251 or 20C259 20C251 or 20C259 20C251 or 20C259 3 3 3 3, 4 707 707 707 708 Tin plated terminals with grounding strip. Tin plated terminals with grounding strip. Tin plated terminals no ground provision. Tin plated terminals no grounding provision. RM RM78700 RM78701 RM78702 RM78705 QC Solder PC Screw RM28802 RM28802 RM28802 -- -- -- -- 5 736 736 736 736 RT RP78601 RP78602 RT78624 RT78625 RT78626 PC PC Screw Screw Screw RP16041 RP16041 RT16016 RT16016 RT16016 -- -- 5 5 5 450 450 450 450 450 Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Use with Code 1. Use with Codes 3 & 5. Use with Code 1. Use with Codes 3 & 5. Use with Codes 3 & 5. Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above. Listed hold-down springs cannot be used for R10S. On R10L series hold down spring fits to the side of light emitting diode. Use 40G432 insulator or suitable insulator (2 per socket). Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware. 27E893 cannot be used with KUIP and KUGP series relays. Relay and Socket Usage Chart continued on next page. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 751 Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAY SOCKET USAGE CHART Relay and Socket Usage Chart Relay Socket Terminal Type Hold-Down Spring Notes Socket Page S89R11APP & S89R11DPP (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 SCB, SCC, SCE (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 SCB, SCC, SCE (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 BCSF11SC Screw -- -- 1218 27E043 27E046 27E067 27E121 27E396 27E893 Solder PC QC & Solder Screw QC & Solder Screw -- -- -- 20C314 -- -- -- -- -- -- -- 5 729 729 729 730 729 730 SRC 27E122 27E891 Screw Screw -- -- 5 741 741 SRUDH 27E1064 PC 20C430 -- 443 SRUUH 27E1064 PC 20C430 -- 445 SSC, SST (8-pin octal) 27E122 27E891 Screw Screw -- -- 5 741 741 SSC, SST (11-pin octal) 27E123 27E892 Screw Screw -- -- 5 741 741 STA 27E043 27E046 27E067 27E121 27E396 27E893 Solder PC QC & Solder Screw QC & Solder Screw -- -- -- -- -- -- -- -- -- -- 5 729 729 729 730 729 730 T7C 27E1064 PC 20C430 -- 441 T7N 27E1064 PC -- -- 435 TR CR0001 CR0002 CR0067 CR0095 Screw Screw Screw Screw CR0111 or CR0133 CR0111 or CR0133 CR0069 CR0070 or CR0155 -- -- -- -- 920 920 920 920 V23047 RP78602 RT78625 RT78626 PC Screw Screw -- RP16104 RP16104 -- 5 5 605 605 605 SCF SDAS-01 Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Comments Use 2 pieces 20C314 per socket. Accommodates function modules. Accommodates function modules. Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above. Listed hold-down springs cannot be used for R10S. On R10L series hold down spring fits to the side of light emitting diode. Use 40G432 insulator or suitable insulator (2 per socket). Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware. 27E893 cannot be used with KUIP and KUGP series relays. Dimensions are shown for 752 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 POWER RELAYS & CONTACTORS Alphanumeric Index Series Type Page 38 .............................. Power Relay ..................................... 818 9100 .......................... Power Relay ..................................... 816 9400 .......................... Power Relay ..................................... 814 KUHP ......................... Power Relay ..................................... 803 Model 2000 ............... Definite Purpose Contactor .............. 828 Model 93-3100 .......... Definite Purpose Contactor .............. 834 Model 96-3100 .......... Definite Purpose Contactor .............. 830 Model 96-3186 .......... Definite Purpose Contactor .............. 838 Model 98-3100 .......... Definite Purpose Contactor .............. 832 Model A-3100 ............ Definite Purpose Contactor .............. 840 P25 ............................ Definite Purpose Contactor .............. 820 P30/P40 ..................... Definite Purpose Contactor .............. 823 P31/P41 ..................... Definite Purpose Contactor .............. 826 PM ............................. Power Relay ..................................... 809 PRD ........................... Power Relay ..................................... 811 RM C/D ..................... Power Relay ..................................... 805 S86R/S87R ................ Power Relay ..................................... 807 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays . 301-336 3 NOTE: A question tree that may help you in selecting an appropriate power relay or definite purpose contactor for your application can Relays be found on the19-21 next page. Mid-Range PC Board ....... 4 Power PC Board Relays ................ 22-35 5 Relays with Forcibly-Guided Contacts.............. 36-79 6 Plug-in/Panel Mount General Purpose Relays............ 701-749 7 Power Relays & Definite Purpose Contactors ............... 801-842 8 Plug-in/Panel Mount Relays KRP-3-H .................................................................... 739 RM8 ......................................................................... 733 Latching, Impulse & Rotary Relays ............................... 149-154 9 Latching, Impulse Rotary & Special Application Relays 136 ........................................................................... 916 S89R/S90R ............................................................... 912 Automotive Relays ...................... 141-148 10 Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 NOTE: In addition to the products described in this section of the databook, more power relays and contactors are also described in other sections. Following is a list. Power PC Board Relays 491 ........................................................................... 509 PCF ........................................................................... 502 T9A ........................................................................... 506 T90 ........................................................................... 504 T92 ........................................................................... 511 Solid State Relays & I/O Modules SSR ........................................................................ 1104 SSRD ...................................................................... 1102 SSRQ ...................................................................... 1108 SSRD ...................................................................... 1106 Automotive Relays T72M ...................................................................... 1005 V23086 ................................................................... 1002 V2R ......................................................................... 1012 VF4 ......................................................................... 1017 VF7 ......................................................................... 1021 VFM ........................................................................ 1014 VKP ......................................................................... 1007 Power relays and contactors are also included in our line of high performance products (see overview of product line in section 14 of this databook). Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 801 Refer to inside back cover. Catalog 1308242 Issued 3-03 POWER RELAYS & CONTACTORS Power Relay & Definite Purpose Contactor Question Tree This guide helps the user select one or more product series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a product for a particular application. Contact Switch Rating? Less than 40 amps* 40 amps* or More AC or DC Coil? AC or DC Coil? AC Coil DC Coil AC Coil DC Coil Number of Poles? Number of Poles? Number of Poles? Number of Poles? One Pole Two Poles Three Poles Four Poles KUHP RM C/D S86R S87R PRD 9400 9100 38 2000 KUHP S86R S87R PM PRD 9100 2000 96-3100 P25 P30 98-3100 PM PRD P30 93-3100 One Pole Two Poles PRD-3_P/R 96-3100 96-3100 93-3100 96-3186 A-3100 Three Poles Four Poles P40 98-3100 93-3100 93-3100 One Pole Two Poles Three Poles Four Poles One Pole Two Poles Three Poles Four Poles KUHP RM C/D S87R PRD 9400 9100 KUHP S87R PRD 9100 P30 P31 PM P30 P41 PRD-3_P/R None P40 P31 P40 * Typical loads for comparison purposes. See catalog pages for a given series for detailed rating specifications. 802 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KUHP series 30 Amp Power Relays File E22575 File LR15734-123 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features * AC coils 6-277VAC 50/60 Hz., DC 6-110VDC. * Contact arrangement up to DPDT. * .250" combination push-on/solder terminals or PC terminals. * Side flange and top flange mounting. * Designed to meet VDE space requirements. * Class B coil insulation. Nominal Voltage 6 12 24 48 110 6 12 24 120 240 277 DC Coils Contact Data @ 25C Arrangements: 1 Form C (SPDT) and 2 Form C (DPDT). Material: Silver or silver-cadmium oxide. Expected Mechanical Life: 10 million operations. AC Coils DC Resistance in Ohms 10%* 32.1 120 472 1,800 10,000 4.2 18 72 1,700 7,200 10,250 Must Operate Voltage Nominal Coil Current (mA) 187 100 51 26.7 11 460 230 115 24 12 9 4.5 9.0 18.0 36.0 82.5 5.1 10.2 20.4 102.0 204.0 235.5 *15% for AC coils. Contact Ratings Contact Arrangement 1 Form C Single Pole Double Throw UL/CSA Ratings 30A 120/240VAC 1 HP @ 120VAC, 1 1/2 HP @ 240VAC 25A @ 28VDC 20A @ 120/240VAC 3/4 HP @ 120VAC 1 1/2 HP @ 240VAC 20A @ 28VDC 7A @ 120VAC (Tungsten)* 2 Form C Double Pole Double Throw Expected Life 100,000 ops. Operate Data @ 25C Must Operate Voltage: DC Coils: 75% of nominal. AC Coils: 85% of nominal. Operate Time (Excluding Bounce): 20 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): 20 milliseconds, typical, at nominal voltage. 100,000 ops. *NO contacts only. Initial Dielectric Strength Environmental Data Between Open Contacts: 1,200V rms. Between Adjacent Contacts: 3,750V rms. Between Contacts and Coil: 3,750V rms. Between Coil and Frame: 2,000V rms. Temperature Range: (Operating) DC Coils: -45C to +70C. AC Coils: -45C to +45C. Shock: 15g's, 11 ms (non-operating). Vibration: .065" double amplitude, 10-55 Hz. Coil Data @ 25C Voltage: 6-110VDC and 6-277VAC. Nominal Power: DC Coils: 1.2 Watts. AC Coils: 2.7VA. Duty Cycle: Continuous. Initial Insulation Resistance: 100 megohms, min. Insulation: Class B, 130C. Mechanical Data Termination: .250" quick connect/solder; and PC board. Enclosure: Polycarbonate dust cover. Weight: 3.2 oz. (92g) approximately. Ordering Information Typical Part No. 1. Basic Series and Type: KUHP = Enclosed 20/30 amp relay. 2. Contact Arrangement and Rating: 5 = 1C (SPDT); 30 amps. 11 = 2C (DPDT); 20 amps. 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Mountings: 1 = PLAIN CASE 5 = BRACKET MOUNT CASE 5. Terminals and Contact Materials: 1 = .250" (6.35mm) quick connect/solder; silver-cadmium oxide. 6. Coil Voltage: AC coils to 277VAC, 50/60 Hz. DC coils to 110VDC. B KUHP- 11 A 5 1 -120 T = TOP FLANGE CASE 7 = .047" (1.19mm) printed circuit; silver-cadmium oxide. NOTE: No sockets are available for this relay. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. KUHP-5A51-24 KUHP-5A51-120 Dimensions are shown for reference purposes only. KUHP-5AT1-120 KUHP-5D51-12 KUHP-5D51-24 KUHP-5DT1-12 KUHP-5DT1-24 KUHP-11A51-24 Dimensions are in inches over (millimeters) unless otherwise specified. KUHP-11A51-120 KUHP-11AT1-120 KUHP-11D51-12 KUHP-11D51-24 Specifications and availability subject to change. KUHP-11DT1-12 KUHP-11DT1-24 www.tycoelectronics.com Technical support: Refer to inside back cover. 803 Catalog 1308242 Issued 3-03 P&B Outline Dimensions Plain Case Top Flange Enclosure 1.393 MAX. (35.38) 1.875 .0 05 (47.63 .13) 1.496 .015 2.382 MAX. (38.05 .38) (60.50) 9 3 6 B A 7 1 4 7 1 4 A 2 5 B 2 5 1.531 MAX. (38.89) .138 TYP. (3.51) 9 3 6 1.406 (35.71) 1.968 MAX. (49.99) 2.461 MAX. (62.51) .178 TYP. (4.52) Terminal Dimensions Bracket Mount Case .07 (1.78) 2.90 MAX. (73.66) .375 (9.53) 1.968 MAX. (49.99) .312 TYP. (7.92) 1.406 MAX. (35.71) .250" (6.35mm) Quick Connect/Solder .035 (.89) .250 .0 03 (6.35 .08) HEADER .75 (19.05) .106 (2.69) 2.500 (63.50) THICKNESS .032 (0.81) .250 (6.35) HEADER .106 (2.69) .358 REF. (9.09) .437 (11.10) .047 (1.19) .125 DIA. (3.18) .312 (7.92) .312 (7.92) .078 R. TYP. (1.98) .625 TYP. (15.88) .156 (3.96) .305 (7.75) .125 DIA. (3.18) 1.531 MAX. (38.89) Printed Circuit .305 (7.75) .343 REF. (8.71) THICKNESS .032 (0.81) .06 (1.52) PC Board Layouts (Bottom Views) Wiring Diagrams 1 Form C 1 Form A (Delete 2) 1 Form B (Delete 5) 2 1 3 5 4 6 7 9 A B 7 A 2 Form C 2 Form A (Delete 1 & 3) 2 Form B (Delete 4 & 6) B 1 Pole Model 2 Pole Model .243 (6.17) .076 DIA. TYP. (1.93) .875 (22.23) .240 (6.10) .637 (16.18) .437 (11.1) .875 (22.23) Dimensions are shown for 804 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. .243 (6.17) Specifications and availability subject to change. .240 (6.10) .076 DIA. TYP. (1.93) .397 (10.08) www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RM C/D series 30 Amp Power Relays Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data * SPST-NO-DM or SPDT-DB-DM arrangements. Termination: .250" quick connects. Enclosure: Plastic dust cover. Weight: 2.86 oz. (81 g) approximately. * Flange-mount case. * Optional push to test button. * Available with LED indicator and protection diode. Contact Data @ 20C Arrangements:1 Form X (SPST-NO-DM) and 1 Form Z (SPDT-DB-DM). Material: Silver-cadmium oxide. Expected Mechanical Life: 10 million operations minimum. Rated Current: 30A. Rated Voltage: 250VAC. Maximum Breaking Capacity (AC): 7,500VA. Maximum Make Current (max. 4s at 10% duty cycle: 60A. Contact Life Initial Dielectric Strength Between Open Contacts: 1,500VAC (RM 5/6 2,500VAC). Between Coil and Contacts: 2,500VAC. Creepage/Clearance: 2.8/4mm. Coil Data @ 20C Voltage: 6-220VDC and 24-400VAC. Nominal Power: DC Coils: 1.2W; AC Coils: 2.8VA. Coil Data @ 20C Nominal Voltage VDC DC Resistance in Ohms Nominal Coil Current (mA) Operate Voltage VDC Drop-out Voltage VDC 4.5 9.0 18.0 36.0 45.0 82.5 165.0 0.6 1.2 2.4 4.8 6.0 11.0 22.0 32 110 475 2,000 2,850 10,000 40,000 10% 10% 10% 10% 10% 12% 15% 187.5 109.1 50.0 24.0 21.1 11.0 5.5 19.2 38.4 48.0 92.0 184.0 320.0 9.6 19.2 24.0 46.0 92.0 160.0 80 320 500 1,850 7,500 23,500 10% 10% 10% 10% 10% 15% 109.2 54.2 43.7 23.0 11.7 6.5 Maximum DC Load Breaking Capacity DC Coils 6 12 24 48 60 110 220 AC Coils Operate Data Must Operate Voltage: See Coil Data table. Operate Time /Release Time (typical): 17 ms / 18 ms. Bounce Time (typical): 4 ms. Switching Rate: 9,600 ops./hr. max. at rated load. Environmental Data DC Coil Operating Range Applied coil voltage (U/Un) 24 48 60 115 230 400 Nom. coil voltage (Un) Temperature Range (Operating): DC Coil: -45C to +60C. AC Coil: -45C to +40C. Vibration: 30 to 150 Hz at 10g N/O, 5g N/C Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 805 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RM C 0 5 024 1. Basic Series: RM = General purpose relay. 2. Contact Arrangement and Rating: C = 1 Form Z (SPDT-DB-DM) 30 Amp D = 1 Form X (SPST-NO-DM) 30 Amp 3. Test: 0 = without push-to-test-button. 3 = with push-to-test-button. 4. Enclosure: 5 = Bracket Mount Case 0.250 (6.35mm) quick connect. 5. Coil Voltage: Standard with Coil LED (bipolar) 006 L06 012 L12 024 L24 048 L48 060 L60 110 M10 220 N21 with protection diode* 0A6 0B2 0C4 0E8 0G0 1B0 2C1 with LED and protection diode LA6 LB2 LC4 LE8 LG0 MB0 NC1 =6VDC =12VDC =24VDC =48VDC =60VDC =110VDC =220VDC Standard Coil with LED 524 548 560 615 730 900 R24 R48 R60 S15 T30 V00 with with LED protection and diode protection diode -- -- -- -- -- -- -- -- -- -- -- -- =24VAC =48VAC =60VAC =115VAC =230VAC =400VAC * For models with protection diode, standard polarity is: terminal A1 is positive, terminal A2 is negative. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 1.516 MAX. (38.50) .157 (4.00) .059 (1.50) (1) 12 (3) 12 (4) 14 (6) 14 (4) 14 (6) 14 (A) A1 (B) A2 (A) A1 (B) A2 2.520 (64.00) 2.894 MAX. (73.50) .059 (1.50) .031 (0.80) 1.398 MAX. (35.50) 1.909 MAX. (48.50) 2.303 (58.50) RMC 1 Form Z (SPDT-DB-DM) RMD 1 Form X (SPST-NO-DM) .248 (6.30) .24 (6.1) .468 (11.9) 1.1 (27.9) .433 (11.0) Dimensions are shown for 806 reference purposes only. .433 (11.0) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B S86R/S87R series Low Cost 20 Amp Industrial Relays File E22575 File LR15734 S86R Mounting Style 1 S87R Mounting Style 2 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features * Low cost. * Contact forms to 2 Form C. * Applications include spa controls, vending machines, HVAC, and machine tool controls. * Variety of mounting styles. Nominal Coil Voltage Coil Resistance (Ohms) AC, 15% DC, 10% Nominal Coil Current (mA) @ 25C* S86R & S87R (AC) All Models All Models 12VAC 24VAC 120VAC 240VAC S87R (DC) Contact Data @ 25C 6VDC 12VDC 24VDC 36VDC 48VDC 72VDC 125VDC 8.0 32 800 3,200 Single Pole Models 12.5 50 200 450 800 1,800 5,425 330 165 33.0 16.5 Double Pole Models 8 32 128 288 512 1,150 3,470 Single Pole Models Double Pole Models 480 240 120 80 60 40 23 750 375 188 125 94 63 36 S86R and S87R: 20 amps @ 277VAC; 60 LRA, 12 FLA, 1 HP @ 125VAC; 48 LRA, 8 FLA @ 240VAC; 2 HP @ 250VAC; Pilot Duty, 360VA @ 125/250VAC. Materials: Silver and silver-cadmium oxide. Expected Life: 1 million operations, mechanical; 50,000 operations at rated loads. *Increase AC current values by 25% for mounting style 2 with single switch. Initial Dielectric Strength Operate Data Initial Breakdown Voltage: 1,560V rms, 60 Hz. Must Operate Voltage: DC Coils: 75% of nominal voltage @ +25C. AC Coils: 85% of nominal voltage @ +25C. Operating Position: Relay is designed for operation with plunger either vertical or horizontal; however, the relay is not designed for operation in an upside-down position. Coil Data @ 25C Nominal Power: S86R: 4.0VA for AC models. S87R: 2.9 Watts for single pole DC models. 4.5 Watts for double pole DC models. 4.0VA for AC models. Insulation: Class B (130C). Environmental Data Temperature Range: -10C to +65C. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 807 Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B S86R 5 A 1 B 1 D 1 -120 1. Basic Series: S86R = Standard relay with AC coil, 20 Amp contacts. S87R = Standard relay with AC or DC coil, 20 Amp contacts. 2. Contact Arrangement: 5 = SPDT 7 = DPST-NO 11 = DPDT 3. Coil Input: A = AC (available on S86R and S87R) D = DC (available on S87R only) 4. Mounting Style: S86: 1 = Style 1 S87: 2 = Style 2 (See outline dimensions) 5. Coil Terminal Style: B = .250" (6.35mm) Quick-connect/solder. 6. Coil Terminal Location (S86): 1 = Same side as switch terminals. Coil Terminal Location (S87): 1 = Located perpendicular to switch terminals. 7. Switch Terminal Style: D = .250" (6.35mm) Quick-connect/solder. 8. Switch Terminal Configuration: 1 = Style 1 9. Coil Voltage: AC coils to 240VAC, 50/60 Hz. DC coils to 125VDC. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. S86R11D1B1D1-12 S87R5A2B1D1-120 S86R5A1B1D1-120 S86R11A1B1D1120 S87R5A2B1D1-240 S87R5D2B1D1-24 S87R11A2B1D1-24 S87R11A2B1D1120 S87R11A2B1D1240 S87R11D2B1D1-110 Outline Dimensions S86R (2 pole shown) Style 1 2.60 MAX. (66.04) 2.00 MAX. (50.80) S87R (2 pole shown) Style 2 1.92 MAX. (48.77) 1.568 REF. (39.83) MTG. HOLES (3) .07 DEEP .156 .0 05 DIA. (3.96 .13) 1.62 MAX. (41.1) MTG. BOSS 2.42 MAX. (61.5) .614 .03 (15.60 .76) 1.480 .010 (37.59 .25) COIL TERMINAL LOCATION #1 COIL TERMINAL LOCATION #2 10 .0 5) .2 6 15 6 2. 4.7 (5 2.42 MAX. (61.47) 1.20 MAX. (30.5) .375 .0 05 (9.53 .13) .158-.161 DIA. (4.01-4.09) .380 (9.65) .280 .0 05 (5.46 .13) .188 (4.78) 2.07 MAX. (52.6) .166 DIA. (4.22) (1) MTG. HOLE Switch Terminal Style Switch Terminal Configuration .250" (6.35mm) Quick Connect Style 1 .066 D. (1.68) COM. N.C. .250 (6.35) .035 (.89) .940 MAX. (23.88) WITH COIL DEENERGIZED N.O. .312 (7.92) Dimensions are shown for 808 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B PM series Heavy Duty 25 Amp Multicontact AC or DC Power Relay File E22575 (PM) File E22575 (PMT) File 15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features * Contact ratings to 25 amps. * 8-32 screw or .250 Q.C. termination. * AC and DC coils available. * 4PDT contact arrangement. * Plastic and metal covers available. Nominal Voltage DC Coils DC Resis. In Ohms 10% @ +25C 6 12 24 48 110 125 . Contact Data @ 25C Arrangements: 4 Form C (4PDT). Ratings: PM & PMT: 25 amps @ 277VAC, max.; 10 amps @ 28VDC; 1 HP @ 120/240VAC, Single Phase. Minimum Ratings: 1 amp @ 12 VAC/VDC. Material: Silver-cadmium oxide. Expected Life: 10 million operations, mechanical; 100,000 operations at rated loads @ 25C. Nominal Current In Milliamps AC Coils (50/60 Hz.) DC Resis. Nominal In Ohms Nominal Voltage 15% Current In @ +25C Milliamps 8.2 732 33 364 12 1.4 1070 132 182 24 5.0 540 526 91 120 120 128 2760 40 240 587 61 3570 35 Use a 110 volt relay with 2700 to 3300 ohm 5 watt wire wound resistor in series. 220 Operate Data @ 25C Must-Operate Voltage: DC: 75% of nominal voltage @ +25C. AC: 85% of nominal voltage @ +25C. Environmental Data . Initial Dielectric Strength Initial Breakdown Voltage: 2,000V rms minimum between all elements and ground. Temperature Range: AC: -55C to +45C @ nominal coil power. DC: -55C to +55C @ nominal coil power (+75C available on special order). . Mechanical Data Mounting: Three holes; one front key-hole and two rear channel slots for #8-32 screws. Termination: PM: Heavy-duty screw type with #8-32 BH screw. PMT: .250" (6.35mm) quick connect terminals. Insulating Material: Molded polyester alkyd. Enclosure: PM & PMT: Plastic dust cover or metal enclosure available. Order separately. See following page. Weight: 14 oz. (397g) approximately. . Coil Data @ 25C Voltage: From 6 to 125VDC and 12 to 240VAC, 50/60 Hz. Nom. Power: DC: 4.4 Watts @ 25C. AC: 14VA @ 25C. Duty Cycle: Continuous. Initial Insulation Resistance: 100 megohms, minimum. Ordering Information Typical Part No. B PM -17 A Y -120 1. Basic Series: PM 2. Type: Leave blank = Open relay with screw terminals. T = Open relay with .250" (6.35mm) quick connect terminals. 3. Contact Arrangement: 17 = 4 Form C (4PDT) 4. Coil Input: A = AC D = DC 5. Contact Material: Y = Silver-cadmium oxide. 6. Coil Voltage: To 240VAC or 125VDC (to 220V with resistor). Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PM-17AY-24 PM-17AY-120 PM-17AY-240 Dimensions are shown for reference purposes only. PM-17DY-12 PM-17DY-24 PM-17DY-110 PMT-17DY-24 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 809 Catalog 1308242 Issued 3-03 P&B Outline Dimensions 2.657 MAX. (67.49) 2.719 MAX. (69.06) .078 (1.98) 2.500 (63.50) .410 MAX. (10.41) 1.000 (25.40) 3.394 MAX. (86.21) 2.000 (50.80) Tolerance: .010 ( .25) PM Plastic Dust Cover 35D203 Overall Dimensions In Inches (mm) Part No. Length Width Height 35D203 3.394* (86.21) 2.657* (67.49) 2.719* (69.06) 35D227 5.313 (134.95) 3.813 (96.85) 3.813 (96.85) *When Mounted On Relay PM Metal Cover 35D227 5.31 MAX. (134.9) 4.125 (104.77) .50 .031 (12.7 .79) 3 MTG. HOLES .215 DIA. (5.46) .093 (2.36) .96 TYP. (24.4) 3.81 MAX. (96.8) 1.50 (38.1) 2.000 1.00 (50.80) (25.4) 1.875 (47.63) 3.81 MAX. (96.8) .75 (19.1) .937 (23.80) 1.12 (28.4) 2.500 (63.50) 3 HOLES TAPPED #8-32 4.87 DIA. KNOCK-OUT HOLES (22.1) 2 KNOCK-OUT HOLES EACH END Dimensions are shown for 810 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B PRD series 10 to 50 Amp Heavy Duty AC or DC Power Relay File E22575 (Models With All Screw Terminals) File E22575 (All Others) File 15734 File 1949 (Q. C. Terminal models only) Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Auxiliary Snap-Action Switch * Contact ratings to 50 amps. * Magnetic blowouts available for switching DC loads. * Arrangements to DPDT. * SPDT auxiliary switch available. * Replaces PR series. Arrangements: 1 Form C (SPDT). Rating: 5 amps at 120VAC, 60 Hz. @ 25C. Material: Silver. Contact Data @ 25C Arrangements: Available to 2 Form C (DPDT). See ordering information. Ratings: See UL contact rating table. Minimum Rating: 1A @ 12 VAC/VDC. Material: Silver and silver-cadmium oxide standard. Other materials available for special applications. Expected Life: 100,000 operations at rated loads @25C. Life increases at reduced loads or with appropriate arc suppression. Initial Dielectric Strength Initial Breakdown Voltage: 2,000V rms minimum between all elements and ground. (2,200V rms on 600V ratings.) Coil Data @ 25C UL/CSA Contact Ratings Type Supply Contact Ratings AC DC AY DY AG DG AY DY PRD 1, 3 or 5 25 amps @ 277VAC 1 HP at 120VAC 2 HP at 250VAC 10 amps at 600VAC 7 amps at 50VDC Res. PRD 1, 3 or 5 30 amps at 277VAC Res. 1.5 HP at 120VAC 2HP at 250VAC 10 amp at 600VAC PRD 7 or 11 25 amps at 240VAC 20 amps at 277VAC 1HP at 120VAC 2HP at 250VAC 7 amps at 50VDC Res. 10 amps at 600VAC PRD 7 or 11 PRD 3,7 or 11 AG DG AH AJ DH DJ 30 amps at 240VAC 20 amps at 277VAC 1.5 HP at 120VAC 2 HP at 250VAC 10 amps at 600VAC 20 amp at 125VDC 1/3 HP at 125VDC UL Recognized Load/Life Parameters for 50 Amp PRD Type PRD3AP4 PRD3DP4 Contact Ratings Minimum Life 50 Amps, 277VAC max., General Purpose 30 Amps, 277VAC max., Ballast 15 Amps, 277VAC max., Tungsten 102 LRA, 17 FLA, 240VAC 120 LRA, 20 FLA, 120VAC 1.5 HP at 120VAC 3 HP at 240VAC 100,000 Cycles 6,000 Cycles 6,000 Cycles 30,000 Cycles 30,000 Cycles 30,000 Cycles 30,000 Cycles Voltage: From 6 to 220VDC, and 6 to 480VAC. Resistance: See coil data table. Nom. Power: DC coils: -2.0 watts @ 25C. AC coils: - 9.8VA @ 25C. Max Power: DC coils: - 8.0 watts @ 25C. Duty Cycle: Continuous. Initial Insulation Resistance: 100 megohms, minimum. Coil Data "DY" and "DG" "AY" and "AG" DC Coils AC Coils (50-60Hz.) Nominal Resistance Nominal DC Nominal DC Resis. Nominal AC Volts In Ohms Current In Volts In Ohms Current In 10%@ 25C Milliamps 15%@ 25C Milliamps 6 12 24 110 220 18 333 71 169 288 84 6050 18.2 Use 110V relay with approx. 6 ,000 ohm 5W wire-wound resistor in series. 6 12 24 120 240 480 .86 3.2 12.0 290 1200 4500 1600 820 410 85 43 22 Operate Data @ +25C Must-Operate Voltage: DC: 75% of nominal voltage @ 25C. AC: 85% of nominal voltage @ 25C. Environmental Data Temperature Range: AC: -55C to +45C. DC: -55C to +80C. Note: Any PRD relay deviating electrically or physically from the standard models in the table is not UL or CSA listed. All horsepower ratings are for single phase motors. Mechanical Data DC Factory Contact Ratings Type PRD3AR4 PRD3DR4 Dimensions are shown for reference purposes only. Contact Ratings 60 Amps, 28VDC Res. 30 Amps, 125VDC Res. Dimensions are in inches over (millimeters) unless otherwise specified. Mounting: Two .187"(4.75mm) diameter holes on 1.875" (47.63mm) centers. Termination: See ordering information tables for various options. Enclosure: Metal dust cover, 35D013, available. Order separately. Weight: 10 oz. (284g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 811 Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B PRD -7 A Y 0 -120 1. Type: PRD = Open relay. PRDA = Open relay with aux. SPDT snap-action switch. 2.Main Contact Arrangement: 1 = SPST-NO 7 = DPST-NO 3 = SPST-NO-DM 7V = DPST-NO with 3mm contact gap 5 = SPDT 11=DPDT 3.Coil Input: A = 50/60 Hz. D = DC 4.Main Contact Material: Y = .312" (7.92mm) dia. silver. G = .312" (7.92mm) dia. silver cad.-oxide. H = Silver w/magnetic blow out. J = Silver cad.-oxide w/magnetic blow out. N = Tungsten stationary & silver cad.-oxide movable. Code 1, 5, 7 & 11 only. Available with Code 3, 7& 11 contact arrangement only. 5.Termination: CODE MAIN COIL AUX. SWITCH 0 #8-32 Screw Term. 6-32 Screw Term. PRD 1 .250" (6.35mm) QC .250" (6.35mm) QC 3 #8-32 Screw Term. .250" (6.35mm) QC PRDA (With Aux. SPDT Snap-Action Switch) A B L #8-32 Screw Term. .250" (6.35mm) QC Twin .250" (6.35mm) QC #6-32 Screw Term. .250" (6.35mm) QC .250" (6.35mm) QC Screw Term. .250" (6.35mm) QC .250" (6.35mm) QC 6.Coil Voltage: 6, 12, 24, 110VDC 6, 12, 24, 120, 240, 480VAC, 50/60 Hz. Coil voltages are available to 125VDC and 600VAC. Stock Items - The following items are normally maintained in stock for immediate delivery. PRD-3AG0-120 PRD-3AJ3-24 PRD-3AY0-120 PRD-3DY0-12 PRD-3DY0-24 PRD-5AY0-24 PRD-5AY0-120 PRD-5AY1-120 PRD-5AY0-240 PRD-5DY0-12 PRD-5DY0-24 PRD-7AG0-120 PRD-7AY0-24 PRD-7AY0-120 PRD-7AY0-240 PRD-7AY3-120 PRD-11DJ0-24 PRD-11DY0-12 PRD-11DY0-24 PRD-11DY0-110 PRDA-11AGA-120 PRDA-11AYA-120 PRD-11AY0-120 PRD-11AY0-240 PRD-11AY0-480 PRD-11DG0-12 PRD-11DG0-24 PRD-11DH0-12 PRD-11DH0-24 PRD-11DH0-110 PRD-7DG0-24 PRD-7DY0-12 PRD-7DY0-24 PRD-11AG0-24 PRD-11AG0-120 PRD-11AG0-240 PRD-11AH0-120 PRD-11AY0-24 Ordering Information Typical Part No. B PRD -3 A P 4 -120 1. Type: PRD = Open power relay. 2. Main Contact Arrangement: 3 = 1 Form X (SPST-NO-DM) 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Main Contact Material: P = 50 amp, silver. R = 50 amp, silver with magnetic blow out. 5. Termination: 4 = Main -- boxlug terminals which accept #6-#14 wire. Coil -- #6-32 screw terminals. 6. Coil Voltage: 12, 24, 48, 110, 125VDC 24, 120, 240, 277, 480VAC, 50/60 Hz. Stock Items - The following items are normally maintained in stock for immediate delivery. No models in the PRD-3AP series are maintained in stock. Dimensions are shown for 812 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions PRD/PRDA Small Base - Top View 2.5 MAX. (63.3) .81 (20.6) .875 MAX. (22.23) 4 2 PRD/PRDA Large Base - Top View .875 MAX. (22.23) .31 (7.9) 3.375 MAX. (85.73) 4 8 2.51 MAX. (63.75) 3 COIL 1.875 (47.63) 7 3 1 ( COIL 1 2 MTG. HOLES DIA. .187 + .005 - .003 4.75 + .13 - .08 2 MTG. HOLES DIA. .187 + .005 - .003 4.75 + .13 - .08 ( ) 6 5 DIMENSIONS APPLY TO PRD 11 AND PRDA 11 DIMENSIONS APPLY TO PRD 1, 3, 5, & 7 ( 2 2.51 MAX. (63.8) 1.875 2.50 1.875 (47.63) (63.5) (47.63) 5 1 2 MTG. HOLES DIA. .187 + .005 - .003 4.75 + .13 - .08 .31 (7.9) 6 6 COIL .31 (7.9) 1.687 (42.85) 2 50 Amp PRD BOX LUG CONNECTOR 5 .81 (20.6) .59 MAX. (15.0) 2.5 MAX. (64) ) ) 2.28 MAX. (57.9) 2.50 MAX. On PRD7 (63.5) 2.50 MAX. (63.5) 2.28 MAX. (57.9) .375 (9.53) 2.23 3.375 (56.6) (85.73) 2.5 MAX. (63.5) W/O AUX SWITCH 3.00 .375 4.250 MAX.(76.2) (9.53) (107.95) 3.375 MAX. W/O AUX SWITCH (85.73) 35D013 Dust Cover PRD dust cover has a steel base with knockouts for 0.5" (12.7mm) dia. conduit and a cover fitted with two screws. Fits PRD relays, except with auxiliary contacts. Finished in gray baked enamel. Mounting: Three No. 10 holes on 1.875" (47.63mm) x 4.125" (104.77mm) centers. Dust Cover Open .375 (9.53) 5.31 MAX. (134.9) 4.125 (104.77) .50 (12.7) 2.06 (52.3) .687 (17.45) 1.875 (47.63) .093 (2.36) 1.625 (41.28) 3.13 MAX. (79.5) .97 (24.64) 1.50 (38.1) .75 (19.1) 3.38 MAX. (85.9) .812 (20.62) .937 (23.86) 2.56 (65.0) 5.125 (130.18) .218 DIA. (5.54) 3 MTG. HOLES 4 HOLES TAPPED #8-32 4 .88 DIA.KNOCKOUT HOLES (22.4) 2 KNOCKOUT HOLES EACH END PRD Magnetic Blow-Out Drawings PRD3 with Magnetic Blow-Out PRD7 with Magnetic Blow-Out PRD11 with Magnetic Blow-Out THIS SIDE OF MAGNET ATTRACTS NORTH SEEKING POLE OF COMPASS. THIS SIDE OF MAGNET ATTRACTS NORTH SEEKING POLE OF COMPASS. THIS SIDE OF MAGNET ATTRACTS NORTH SEEKING POLE OF COMPASS. POLARITY MARKING Dimensions are shown for reference purposes only. - + - POLARITY MARKING POLARITY MARKING Dimensions are in inches over (millimeters) unless otherwise specified. - + Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 813 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 9400 series Power Relay 1-pole, 8-12 FLA AC or DC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Temperature Rise Above Ambient Features * Single-pole relay used extensively in HVAC applications. * Multi-positional mounting without affecting operation. * Convenient 0.250" (6.35 mm) quick connect terminals. Arrangements: 1 Form X (SPST-NO-DM), 1 Form Y (SPST-NC-DB), 1 Form Z (SPDT-DM-DB) & 1 Form Z (SPDT-DM-DB) jumpered to wire as 1 Form C (SPDT). Materials: Silver Alloy and Fine Silver. Maximum Ratings: Silver Alloy (Power) Contacts All Forms: 12 FLA, 60 LRA @ 125VAC; 18A @ 125VAC, resistive; 8 FLA, 48 LRA @ 240/277VAC; 18A @ 240/277VAC, resistive. 1 Form X only: 25A @ 240/277VAC, resistive. Fine Silver (Pilot) Contacts All Forms: 3A, 277VAC; 125VA @ 125VAC; 250VA @ 250VAC; 277VA @ 277VAC; Expected Life: 1 million ops., mechanical. 250,000 ops., at rated resistive load. 100,000 ops., at rated inductive load. Coil Temperature Rise (C) Contact Data @ 25C 140 120 100 80 60 40 20 0 80 100 120 % Of Nominal Coil Voltage 130 Operate Data @ 25C Must Operate Voltage: Approximately 85% of AC nominal coil voltage. Approximately 75% of DC nominal coil voltage. Environmental Data Temperature Range: Storage and Operating: -40C - +65C. Initial Dielectric Strength Initial Breakdown Voltage: 1,554 VAC between live parts and exposed non-current carrying metal parts. Coil Data @ 25C Mechanical Data Voltage: 12 & 24 VDC; 6-277 VAC, 50/60 Hz. Max. Sealed Power: 4 VA (AC coils.); 3 W (DC coils). Nominal Inrush Power: 5 VA (AC coils.); 3 W (DC coils). Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Termination: 0.250" (6.35 mm) quick connects, standard. Consult factory for availability of optional 0.187" (4.75 mm) quick connects. Weight: 2.88 oz. (82 g) approximately Dimensions are shown for 814 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 9400 -0 3 Q 1 999 1. Series: 9400 = 1- pole, 8-12 FLA relay 2.Mounting Bracket: 1 = Standard I Bracket with mounting holes on 2.625" (66.67mm) centers 4 = Standard T Bracket with mounting holes on 1.563" (39.70mm) centers 0 = Special I Bracket with mounting holes on 2.156" (54.76mm) centers 3. Pole Configuration: 1 = 1 Form X (SPST-NO-DM) 2 = 1 Form Y (SPST-NC-DB) 3 = 1 Form Z (SPDT-DM/DB) 4 = 1 Form Z (SPDT-DM/DB) jumpered to wire as 1 Form C. 4. Coil Voltage (50/60 Hz.): B = 12VDC Y = 6VAC C = 24VDC Q = 24VAC P = 100VAC T = 120VAC S = 200VAC U = 208/240VAC V = 277VAC QS = 24VAC, low VA 5. Contact Type: 1 = Silver alloy power contacts 2 = Fine silver pilot contacts 6. Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID Standard part numbers listed below are more likely to be available from stock. 9400-03Q1999 9400-03T1999 9400-03U1999 9400-04Q1999 9400-04T1999 9400-04U1999 Outline Dimensions 1.500 MAX. (38.1) 9400 Series .190 DIA (4.826) 1.842 (46.79) Standard I Bracket (Code 1) 1.265 MAX. (32.13) .625 1.265 (15.9) (32.13) 2.625 (66.68) 3.00 (76.2) 1.842 (46.79) .922 (23.42) .150 DIA (3.81) .150 DIA (3.81) Standard T Bracket (Code 4) 1.813 1.563 (46.05) (39.7) 1.265 (32.13) 1.842 (46.79) Special I Bracket (Code 0) .500 1.265 (12.7) (32.13) 2.156 (54.76) .375 (9.52) 2.67 (67.8) Contact Configurations 1 Form X Dimensions are shown for reference purposes only. 1 Form Y 1 Form Z Jumpered 1 Form X Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 815 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 9100 series Power Relay 1- and 2-pole, 3-12 FLA AC or DC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Temperature Rise Above Ambient * Single- or double-pole relay used extensively in HVAC applications. * Multi-positional mounting without affecting operation. * Convenient 0.250" (6.35 mm) quick connect terminals. Contact Data @ 25C Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC), 1 Form C (SPDT), 2 Form A (DPST-NO), 2 Form B (DPST-NC), 2 Form C (DPDT) or 1 Form A + 1 Form B (SPST-NO+SPST-NC). Materials: Silver, Fine Silver and Gold Alloy. Maximum Ratings: Silver (Power) Contacts All Forms: 3/4 HP @ 125/250VAC; 12 FLA, 60 LRA, 15A resistive @ 125VAC; 6 FLA, 35 LRA, 15A resistive @ 250/277VAC; 3 FLA, 18 LRA, 12.5A resistive @ 480VAC; 3 FLA, 14 LRA @ 600VAC; Form A only: 25A @ 277VAC, resistive. Fine Silver and Gold Alloy (Pilot) Contacts All Forms: 1/10 HP @ 125/250VAC; 3A @ 277VAC; 125VA @ 125VAC. Expected Life: 1 million ops., mechanical. 250,000 ops., at rated resistive loads. 100,000 ops., at rated inductive loads. 100 Coil Temperature Rise (C) Features 90 80 70 60 50 40 30 20 10 0 80 100 120 % Of Nominal Coil Voltage 130 Operate Data @ 25C Must Operate Voltage: Approximately 85% of AC nominal coil voltage. Approximately 75% of DC nominal coil voltage. Environmental Data Temperature Range: Storage and Operating: -40C - +65C. Initial Dielectric Strength Initial Breakdown Voltage: 2,200 VAC @ 60 Hz. between live parts and exposed non-current carrying metal parts. Coil Data @ 25C Mechanical Data Voltage: 12 & 24 VDC; 24-277 VAC, 50/60 Hz. Max. Sealed Power: 9.5 VA (AC coils.); 5.75 W (DC coils). Nominal Inrush Power: 21.5 VA (AC coils.); 5.75 W (DC coils). Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Termination: 0.250" (6.35 mm) quick connects. Dual terminals on the coil are standard. Weight: 6.08 oz. (173 g) approximately Dimensions are shown for 816 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 9100 -2 3 3 Q 999 1. Series: 9100 = 1- or 2-pole, 3-12 FLA relay 2. Pole Configuration: 1 = Two-pole 3 = Single-pole (1,2,3 omitted) 4 = Single-pole (4,5,6 omitted) 3. Contact Configuration - Poles 4, 5, 6: 1 = 1 Form A (SPST-NO), Silver Contacts. 2 = 1 Form B (SPST-NC), Silver Contacts. 3 = 1 Form C (SPDT), Silver Contacts 4 = 1 Form A (SPST-NO), Fine Silver Contacts. 5 = 1 Form B (SPST-NC), Fine Silver Contacts. 6 = 1 Form C (SPDT), Fine Silver Contacts 7 = 1 Form A (SPST-NO), Gold Alloy Contacts. 8 = 1 Form B (SPST-NC), Gold Alloy Contacts. 9 = 1 Form C (SPDT), Gold Alloy Contacts 0 = 4, 5, 6 Omitted 4. Contact Configuration - Poles 1, 2, 3: 1 = 1 Form A (SPST-NO), Silver Contacts. 2 = 1 Form B (SPST-NC), Silver Contacts. 3 = 1 Form C (SPDT), Silver Contacts 4 = 1 Form A (SPST-NO), Fine Silver Contacts. 5 = 1 Form B (SPST-NC), Fine Silver Contacts. 6 = 1 Form C (SPDT), Fine Silver Contacts 5. Coil Voltage (50/60 Hz.): B = 12VDC Q = 24VAC C = 24VDC P = 100VAC 6. Customer ID Suffix: 999 = Standard Model 7 = 1 Form A (SPST-NO), Gold Alloy Contacts. 8 = 1 Form B (SPST-NC), Gold Alloy Contacts. 9 = 1 Form C (SPDT), Gold Alloy Contacts T = 120VAC S = 200VAC U = 208/240VAC N = 240VAC V = 277VAC QS = 24VAC, low VA 000-998 = Factory assigned customer ID Standard part numbers listed below are more likely to be available from stock. 9100-233Q999 9100-233T999 9100-233U999 Outline Dimensions 2.01 (51.05) .095 (2.41) 1.81 (45.97) .15 (3.81) .22 (5.59) .550 (13.97) .495 (12.57) 1.830 (46.48) .145 (3.68) .203 DIA (5.16) .16 (4.06) 1.64 (41.66) Dimensions are shown for reference purposes only. .195 (4.95) .710 (19.03) Dimensions are in inches over (millimeters) unless otherwise specified. 2.365 (60.1) Specifications and availability subject to change. 2.110 (53.6) www.tycoelectronics.com Technical support: Refer to inside back cover. 817 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 38 series Potential Motor Starting Relay 1-pole, 35A, Normally Closed AC Coil File E83865 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25C * Single-pole, normally closed relay used extensively in HVAC applications. * Variety of mounting positions and brackets. * Convenient 0.250" (6.35 mm) quick connect terminals. * Custom-built to meet customer requirements. Voltage: 130, 170, 214, 256, 336, 395, 420 and 495 VAC, 60 Hz. Nominal Sealed Power: 5 VA). Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Data @ 25C Arrangements: Normally-Closed. Materials: Silver cadmium oxide. Maximum Rating: 35A inductive @ 277VAC, 0.5 power factor (Break only.) Expected Life: 750,000 ops, mechanical. 250,000 ops., breaking rated load. Initial Dielectric Strength Initial Breakdown Voltage: 1,554 VAC @ 60 Hz. between live parts and exposed non-current carrying metal parts. Mechanical Data Termination: 0.250" (6.35 mm) quick connects (single or dual, model dependent). Terminals #4 & #6 are dummies for customer convenience. Mounting Position: Each model is calibrated for its specified mounting position. Pick-up voltage may vary if relay is mounted in positions other than specified. Weight: 5.76 oz. (163.8 g) approximately Ordering Information Typical Part No. B 38 -A 144 C 3 000 1. Series: 38 = 1-pole, normally-closed, potential motor starting relay 2. Wiring and Terminal Type (number of QCs at given base locations): A = 2 @ loc. 1, 2 @ loc. 2, 4 @ loc. 3, 2 @ loc. 5 and 2 @ loc. 6. D = 2 @ loc. 1, 2 @ loc. 2, 4 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. M = 2 @ loc. 1, 2 @ loc. 2, 2 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. R = 1 @ loc. 1, 2 @ loc. 2, 0 @ loc. 3, 1 @ loc. 5 and 0 @ loc. 6. S = 1 @ loc. 1, 2 @ loc. 2, 0 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. T = 2 @ loc. 1, 2 @ loc. 2, 0 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. Y = 1 @ loc. 1, 2 @ loc. 2, 4 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. 3. Coil Rating and Calibration: 000-999 = See table on following page for details. 4. Mounting Bracket Style: C, D, F or J = See drawings below for details. C #8-32 UNC-2B THD. 1.59 (40.39) F D #8-32 UNC-2B THD. 1.00 (25.4) J .500 (12.7) 1.563 (39.7) 5. Mounting Position: 1, 2, 3, 4, 5 & 6 = See drawings below for details. NOTE: Devices calibrated in specified mounting position only. 1 2 3 4 5 6 6. Customer ID Suffix: 000-999 = Factory assigned customer ID Standard part numbers listed below are more likely to be available from stock. Custom parts only. Dimensions are shown for 818 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Coil Rating & Calibration Table Select proper continuous coil voltage from top of appropriate column, select pick - up (PU) and drop-out (DO) voltages and insert relay calibration (RC) number in part number. COIL #1 130 V 60 Hz 117 V 50 Hz* RES.@ 1480+10% 24C RC# PU DO 1 8 15 22 29 36 43 50 57 111-125 20-50 64 121-134 20-50 71 130-143 20-55 78 139-153 20-55 85 149-163 20-55 92 99 106 113 120 127 134 141 80-110 20-55 148 62-76 20-45 156 163 170 178 185 COIL #2 COIL #3 COIL #4 170 V 60 Hz 256 V 60 Hz 336 V 60 Hz 151 V 50 Hz* 228 V 50 Hz* 299 V 50 Hz* RES.@ 2040+10% RES.@ 5100+10% RES.@ 6800+10% 24C 24C 24C RC# PU DO RC# PU DO RC# PU DO 2 159-172 20-77 3 240-269 45-95 4 243-271 55-125 9 10 259-288 45-95 11 261-290 55-125 16 17 278-306 45-115 18 280-309 55-125 23 24 296-325 45-115 25 299-327 55-125 30 31 315-343 45-115 32 317-345 55-125 37 38 323-352 45-115 39 326-354 55-125 44 45 333-363 45-115 46 335-364 55-125 51 52 285-305 MAX. 77 53 340-370 55-125 58 111-124 30-65 59 240-269 35-77 60 171-184 40-90 65 120-134 30-65 66 123-134 25-77 67 168-182 MAX. 90 72 130-144 30-65 73 74 180-195 40-90 79 140-153 30-65 80 136-150 45-90 81 219-253 40-115 86 149-163 30-65 87 150-163 45-90 88 152-166 55-115 93 159-172 30-65 94 159-172 45-90 95 162-175 55-115 100 168-182 30-65 101 168-182 45-95 102 171-184 55-115 107 178-192 30-75 108 178-192 45-95 109 180-193 55-115 114 139-153 MAX. 55 115 185-213 45-95 116 188-214 55-115 121 122 203-231 45-95 123 205-234 55-115 128 129 221-250 45-95 130 224-252 55-125 135 136 140-152 33-77 137 186-215 40-90 142 143 285-305 45-115 144 162-175 40-90 149 150 159-172 35-77 151 162-175 70-100 157 158 150-162 MAX. 77 159 243-271 40-90 164 165 136-150 MAX. 50 166 205-234 40-90 171 172 166-182 35-77 173 180-195 MAX.105 179 180 181 224-252 40-90 186 187 188 280-309 55-100 194 205-234 40-90 198 152-166 40-90 COIL #5 COIL #6 395 V 60 Hz 420 V 60 Hz 338 V 50 Hz* 378 V 50 Hz* 12700+10% RES.@ 9600+10% RES.@ 24C 24C RC# PU DO RC# PU DO 5 245-275 60-140 6 242-272 75-150 12 262-290 60-140 13 262-290 75-150 19 280-310 60-140 20 280-310 75-160 26 305-335 60-140 27 300-328 75-160 33 187-208 60-130 34 318-347 75-160 40 326-354 60-140 41 328-356 75-150 47 335-365 60-140 48 337-366 75-160 54 340-370 60-140 55 340-370 75-160 61 180-195 40-105 62 300-328 75-121 68 215-225 MAX.120 69 300-328 MAX.125 75 334-363 50-110 76 212-232 MAX.121 82 298-326 50-110 83 195-224 60-121 89 189-205 60-130 90 204-233 60-121 96 162-175 50-100 97 260-290 60-121 103 180-195 50-100 104 242-272 60-121 110 180-195 60-130 111 180-195 60-121 117 190-215 60-130 118 190-215 60-121 124 208-239 60-130 125 204-233 75-150 131 223-254 60-140 132 223-252 75-150 138 245-275 MAX.120 139 195-224 75-150 145 208-239 MAX.120 146 320-340 60-121 152 260-275 MAX.120 153 295-315 MAX.195 160 260-275 60-140 161 218-243 60-121 167 215-225 60-130 168 205-234 40-90 174 239-270 50-110 175 223-252 60-121 182 208-239 50-110 183 295-315 MAX.125 189 224-252 60-121 190 280-310 60-121 195 190-215 40-105 192 180-195 40-105 200 279-308 50-110 COIL #7 COIL #8 495 V 60 Hz 214 V 60 Hz 452 V 50 Hz* 193 V 50 Hz* RES.@ 15200+10% RES.@ 2840+10% 24C 24C RC# PU DO RC# PU DO 7 239-268 75-170 193 158-171 25-57 14 258-287 75-170 196 120-134 25-56 21 277-305 75-170 197 129-142 25-57 28 295-324 75-170 35 314-342 75-180 42 323-352 75-180 49 332-361 75-180 56 258-287 60-135 63 70 323-352 MAX.135 77 277-305 75-150 84 295-324 60-135 91 325-345 MAX.135 98 105 112 239-268 60-135 119 325-345 75-170 126 277-305 60-135 133 140 147 154 162 169 176 184 191 Outline Dimensions 1.59 (40.4) .156 (3.96) .250 (6.35) 1.82 (46.2) 2.065 (52.45) 1.82 (46.2) 2.03 (51.6) *For 50 Hz, add 300 to RC# - i.e. for 151 V 50 Hz, RC# 58 changes to 358. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 819 Catalog 1308242 Issued 3-03 P&B P25 series Definite Purpose Magnetic Contactor 25 Ampere Full Load 30 Ampere Resistive AC & DC Coils .. TUV Rheinland P25 with DC coil P25 with AC coil AC and DC coils. For controlling motors, power supplies, heating elements and lighting. Dust cover available. Auxiliary switch available. Contact Data @ 25C Arrangements: Up to 3 Form X (3PST-NO-DM). Ratings: See contact rating table. Material: Silver-cadmium oxide. Expected Life: 500,000 operations at full load. AC coil: 2 million operations, mechanical. DC coil: 5 million operations, mechanical. Minimum Contact Load: 3A @ 120VAC. Motor Rating in Amps, 3O3P or 1O2P Full Load Locked Rotor @ 600V @ 240V @ 480V @ 600V P25 25A Type 1O2P 3O3P 150A 125A 100A Motor Rating in Horsepower @ 120V @ 240V 1.5HP 3HP 3HP 7.5HP Nominal VDC Resistance (Ohms 10% @ 25C) Must Operate* Volts 12 24 34 133 AC Voltage Rating 60 Hz. 50 Hz. 24 120 240 24 120 208/240 24 110 208/220 Maximum Operating Volts 9 18 Nominal Nominal Coil Current (ma) @ Nominal Voltage 15 30 353 180 Must Operate 60 Hz. 50 Hz. 20.4 102 177 20.4 94 177 Consult factory for other voltages. *Must operate is 75% of nominal voltage for any mounting position, applicable for vertical or horizontal mounting, but not for upside-down mounting. **Units requiring less power can be provided for some applications. Consult factory for details. Note: Coil suppression is recommended for all DC coil units, particularly 120 and 240VDC coils. Main Contact Ratings @ +25C, 60 Hz. Type Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features * * * * File E22575 File LR15734 No. R 97069 Resistive Rating (Electric Heat) @ 600V 30A Operate Data @ 25C @ 440-600V Must-Operate Voltage: See coil data tables. -- 10HP Notes: Models utilizing box lug terminals are restricted to the following ratings: 25 FLA, 150 LRA @ 250VAC; 30A @ 277VAC Resistive; Horsepower ratings shown in the table are valid up to 240VAC. Tungsten Lamp Rating: 30A, 277VAC. Electric Discharge Lamp Rating: 30A, 277VAC. Heavy Duty Pilot Ratings @ 120V through 600V: 720VA max. (Box lug nut units limited to 277VAC.) Auxiliary Snap-Action Switch Arrangements: Up to 2 Form C (DPDT). Rating: 10 amps at 120VAC, 60 Hz. @ 25C. Material: Silver. Environmental Data Temperature Range: AC: --55C to +65C DC: --55C to +55C Contact sales representative for higher temperature ratings. Initial Dielectric Strength Initial Breakdown Voltage: 2,200V rms. minimum between all elements and between all elements and ground. Coil Data @ 25C Voltage: From 6 to 240VDC and 24 to 600VAC, 50/60 Hz. Power: DC, 4-8W; AC, 40VA inrush; 10VA, sealed. Duty Cycle: Continuous. Insulation Class: Class A, standard. Class B available. Initial Insulation Resistance: 100 megohms, minimum. Dimensions are shown for 820 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Mounting: No. 10 screws on 2.125" (53.98mm) centers or universal mounting bracket. Termination: Contacts: 8-32 screw for No. 16 to No. 8 wire, dual .250" (6.35mm) quick connect, box lug or captive pressure plate. Coil: Combination 8-32 screw and .250" (6.35mm) or .187" (4.75mm) quick connect, combination captive pressure plate and .250" (6.35mm) quick connect, or .250" (6.35mm) quick connect. Aux. Switch: .250" (6.35mm) quick connect, .187" (4.75mm) quick connect. Weight: 14 oz. (397g). Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B P25 P 42 A 1 4 P 1 -240 1. Type: P25 Definite Purpose Contactor 2. Auxiliary Switch: P = No Aux Switch C = 1 Form C (SPDT), silver contacts F = 2 Form C (DPDT), silver contacts Double pole contact forms require two switches. 3. Main Contact Arrangement: 42 = 3 Form X (3PST-NO-DM) 43 = 2 Form X (DPST-NO-DM) & 1 Form Y (SPST-NC-DB) Other contact arrangements are available. 4. Coil Control Input: A = Alternating Current, 50/60 Hz. D = Direct Current 5. Mounting and Installed Accessories: 1 = Without Mounting Plate* 2 = With Mounting Plate * Order separately any mounting hardware which is to be bulk packed. 6. Main Contact Terminals: 2 = 8-32 Screw Terminals 3 = Dual .250" (6.35mm) Quick Connect 5 = 8-32 Screw with Captive Pressure Plate 7. Auxiliary Contact Terminals: P = No Auxiliary Switch D = .250" (6.35mm) Quick Connect 8. Coil Terminals: 1 = Combination 8-32 Screw Terminal and .250" (6.35mm) Quick Connect 6-32 Screw Terminal available on DC Coils only. 9. Coil Voltage: 24, 120 or 240VAC 12 or 24VDC See Coil Data table. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. P25P42A12P1-120 P25P42A12P1-240 P25P42A22P1-120 P25P42A22P1-240 P25P42D22P1-12 P25P42D22P1-24 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 821 Catalog 1308242 Issued 3-03 P&B Outline Dimensions P25 With DC Coil 1.875 (47.63) 2.00 (50.8) 2.90 MAX. (73.7) W/SINGLE SWITCH 2.50 MAX. (63.5) 2.125 .01 (53.98 .25) 3.35 MAX. (85.1) W/DOUBLE SWITCH 3.35 MAX. (85.1) W/DOUBLE SWITCH .218 .01 (5.54 .25) (1.00) (25.4) .21 (5.3) .062 (1.57) .250 (6.35) 1.625 3.250 (41.28) (82.55) 3.75 (95.3) .5 DIA. (12.7) 3.125 (79.38) 1.062 (26.97) 3.400 MAX. (86.36) W/SINGLE SWITCH 3.400 MAX. (86.36) W/SINGLE SWITCH 2.125 (53.98) #10-32 TYP. 2 PLACES .142 (3.61) 3.575 MAX. (90.81) W/CONTACT DUST COVER 3.25 MAX. (82.6) W/CONTACT DUST COVER .69 .015 (17.5 .38) 1.61 MAX. (40.9) 3.325 MAX. (84.48) W/O CONTACT DUST COVER 2.750 MAX. (69.85) W/O SWITCHES 2.750 MAX. (69.85) W/O SWITCHES 3.0 MAX. (76.2) W/O CONTACT DUST COVER 2.50 (63.5) 4.050 MAX. (102.87) W/DOUBLE SWITCH .218 .01 (5.54 .25) 2.125 .01 (53.98 .25) 2.05 MAX. (52.1) 2.50 MAX. (63.5) 2.90 MAX. (73.7) W/SINGLE SWITCH 4.050 MAX. (102.87) W/DOUBLE SWITCH Mounting Plate Footprint 2.05 MAX. (52.1) P25 With AC Coil .69 .015 (17.5 .38) .88 .015 (22.4 .38) .90 .015 (22.9 .38) Contact Terminal Options Code 2 #8-32 UNF-2A X .375" (9.525mm) Binder Terminal Screw 15S334 Code 3 Duak .250" (6.35mm) Quick Connect 26A902 Code 4 Box Lug Connector 26A866 Code 5 #8-32 UNF-2A X .500" (12.7mm) Screw With Captive Pressure Plate 15S354 Replacement Parts and Accessories Contact Replacement Kit - 9P25X1 Contact replacement kit includes 3 contact pressure springs, 3 movable contact assemblies and 6 stationary contact assemblies. Contact replacement kits are for use only on those models with form X contact arrangements. Mounting Plate Kit - 9P25X2 Mounting plate kit includes one mounting plate (37B918) and two mounting screws (15J011). Auxiliary Switch Kit for P25 AC Coil Units - 9P25X3 This auxiliary switch kit includes one plastic actuator and one auxiliary switch assembly. It contains no screw. One assembly screw must be removed from the P25 contactor and used to mount the auxiliary switch. Auxiliary Switch Kit for P25 DC Coil Units - 9P25X4 This auxiliary switch kit includes one plastic actuator, one auxiliary switch assembly and one thread cutting screw. Dimensions are shown for 822 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B P30/P40 series Definite Purpose Magnetic Contactor 30/40 Ampere Full Load 40/50 Ampere Resistive AC & DC Coils File E22575 File LR15734 DC Coil Coil Data * AC and DC coils. * Available with auxiliary switch. * Variety of main contact terminals. * For control of motors, power supplies, heating elements and lighting. Contact Data @ 25C Arrangements: Up to 4 Form X (4PST-NO-DM) Ratings: See contact rating table. Material: Silver-cadmium oxide. Expected Life: 200,000 operations at full load. AC coil: 2 million operations, mechanical. DC coil: 10 million operations, mechanical. Minimum Contact Data: 3A @ 120VAC. P40 Motor Rating in Amps, 3O3P or 1O2P Full Load Locked Rotor @ 600V @ 240V @480V @ 600V 30A 180A 150A 120A 40A 240A 200A 160A Resistive Rating @ 600V 40A Tungsten Rating @277V 40A 50A 50A P30 Electrical Discharge Lamp Control: 40A @ 240V (Delta), 40A @ 600V (Wye). P40 Electrical Discharge Lamp Control: 50A @ 600V (Wye). Motor Rating in Horsepower @ 120V @ 240V Type P30 P40 1O2P 3O3P 1O2P 3O3P 1.5HP 3HP 2HP 5HP 3HP 7.5HP 5HP 10HP Nominal VDC Resistance (Ohms 10% @ 25 C) 12 24 48 120 Must Operate* Volts 20.8 84 334 2,110 AC Voltage Rating 24 120 240 277 Main Contact Ratings P30 P30 No. R 97070 P40 No. R 97071 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. AC Coil Features Type .. TUV Rheinland Maximum Operating Volts Nominal Coil Current (ma) @ Nominal Voltage 15 30 57 144 577 286 144 57 9 18 36 90 Nominal 50/60 Hz. 24 110/120 208/240 277 Must Operate* 50/60 Hz. 20.4 94 177 236 *Applicable for vertical mounting, but not for upside-down mounting. Note: Coil suppression is recommended for all DC coil units, particulary 120 and 240VDC coils. Operate Data Must-Operate Voltage: See coil data tables. @ 440-600V -- 7.5HP -- 15HP Environmental Data Temperature Range: -55C to +65C. Auxiliary Snap-Action Switch Arrangements: Up to 2 Form C (DPDT). Rating: 10 amps at 120-250VAC @ 25C. Material: Silver. Mechanical Data Initial Dielectric Strength Initial Breakdown Voltage: 2,200V rms minimum between all elements and between all elements to ground. Coil Data @ 25C Voltage: From 12 to 120VDC, and 24 to 277VAC, 50/60 Hz. Power: DC, 7.5 W; AC, 92VA, In rush; 12 VA Sealed. Duty Cycle: Continuous. Insulation Class: Class A, standard, Class B available. Initial Insulation Resistance: 100 megohms, minimum. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mounting: Universal mounting bracket. See outline drawings. Termination: Contacts: Binder screw, box lug, captive pressure plate, combination screw and dual .250" (6.35mm) quick connect, or combination box lug and dual .250" (6.35mm) quick connect. See Main Contact Terminal Options photo. Coil: Combination 8-32 screw and .250" (6.35mm) quick connect. Aux. Switch: .250" (6.35mm) quick connect, .187" (4.75mm) quick connect. Weight: 3 Pole Models: 25 oz. (709g) approximately. 4 Pole Models: 28 oz. (794g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 823 Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B P30 P 42 A 1 4 P 1 -240 1. Type: P30 = Definite Purpose Contactor, 30 amp. P40 = Definite Purpose Contactor, 40 amp. 2. Auxiliary Switch: P = No Aux. Switch C = 1 Form C (SPDT) F = 2 Form C (DPDT) 3. Main Contact Arrangement: 42 = 3 Form X (3PST-NO-DM) 43 = 2 Form X (DPST-NO-DM) & 1 Form Y (SPST-NC-DB) 45 = 1 Form X (SPST-NO-DB) & 2 Form Y (DPST-NC-DB) 4. Coil Control Input: A = Alternating Current, 50/60 Hz. 47 = 4 Form X (4PST-NO-DM) 48 = 2 Form X (DPST-NO-DM) & 2 Form Y (DPST-NC-DB) 49 = 4 Form Y (4PST-NC-DB) Other contact arrangements are available. D = Direct Current 5. Mounting and Installed Accessories: 1 = Standard Mounting 6. Main Contact Terminals: 2 = Screw Terminals 3 = Screw Terminals & Dual .250" (6.35mm) Quick Connect 4 = Box Lug 5 = Captive Pressure Plate 6 = Box Lug & Dual .250" (6.35mm) Quick Connect 7. Auxiliary Contact Terminals: P = No Auxiliary Switch C = .187" (4.75mm) Quick Connect D = .250" (6.35mm) Quick Connect 8. Coil Terminals: 1 = Combination 8-32* Screw Terminal and .250" (6.35mm) Quick Connect 9. Coil Voltage: 24, 120, 240 or 277VAC 12, 24 or 120VDC Our authorized distritburos are more likely to maintain the following items in stock for immediate delivery. P30P42A12P1-120 P30P42D12P1-24 P30P47A12P1-120 P30P47D12P1-24 Dimensions are shown for 824 reference purposes only. P40C42A12D1-120 P40P42A12P1-24 P40P42A12P1-120 P40P42A12P1-240 P40P42D12P1-24 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions 3 Pole Models DC Coil AC Coil 3.25 MAX. (82.55) W/SWITCH 2.650 MAX. (67.31) W/O SWITCH 3.420 MAX. (86.87) .21 TYP. (5.3) 3.975 MAX. (100.97) 2.550 (64.77) .25 TYP. (6.4) 3.250 .010 (82.55 .25) 3.800 MAX. (96.52) 3.550 MAX. (90.17) 3.550 MAX. (90.17) 3.125 .010 (79.38 .25) .5 DIA. (12.7) 1.500 .020 (38.10 .51) 2.00 (50.8) 4 Pole Models DC Coil AC Coil 3.600 MAX. (91.44) W/SWITCH 3.350 MAX. (85.09) W/O SWITCH 3.975 MAX. (100.97) 3.420 MAX. (86.87) 3.550 MAX. (90.17) 3.800 MAX. (96.52) .21 TYP. (5.3) 3.125 .010 (79.38 .25) 3.550 MAX. (90.17) 2.550 (64.77) .25 TYP. (8.4) 3.250 .010 (82.55 .25) .5 DIA. (12.7) 1.500 .020 (38.10 .51) 2.00 (50.8) Contact Terminal Options Code 2 Code 3 #10-32 UNF-2A X .375" (9.525mm) Binder Terminal Screw 15S365 accepts the following wire size: Solid, Single -- 8 AWG Dual .250" (6.35mm) Quick Connect 26A945 #10-32 UNF-2A X .375" (9.525mm) Binder Terminal Screw 15S365 accepts the following wire size: Solid, Single -- 8 AWG Code 4 Box Lug (Keyed) 24C540 with 15S361 & 15S364 Screws Accepts the following wire sizes: Solid, Single --14-4 AWG Code 5 #10-32 UNF-2A X .500" (12.7mm) Screw with Captive Pressure Plate 15S362 Accepts the following wire sizes: Solid, Single --22-8 AWG Solid, Double --22-14 AWG Stranded, Single --22-8 AWG Stranded, Double --22-16 AWG Code 6 Dual .250" (6.35mm) Quick Connect 26A945 Box Lug 9P30X3 Accepts the following wire sizes: Solid, Single --14-4 AWG Main Contact Ordering and Replacement Information Contact Replacement Kits Contact replacement kits for 3 pole models include 3 contact pressure springs, 3 movable contact assemblies and 6 stationary contact assemblies. Kits for 4 pole models include 4 contact pressure springs, 4 movable contact assemblies and 8 stationary contact assemblies. Contact replacement kits are for use only on those models with form X contact arrangements. Kits for P30 contactors: 3 Form X models - Kit No. 9P30X1 4 Form X models - Kit No. 9P30X2 To Replace Contacts: 1. Remove screws holding dust cover in place, and remove cover. 2. Compress and remove contact pressure springs. 3. Lift movable contacts and remove. 4. Remove screws holding stationary contact in place, and remove contacts. 5. Reverse the above procedure to install new stationary and movable contacts. Caution: Do not overtighten the screws, as it is possible to strip the threads. Kits for P40 contactors: 3 Form X models - Kit No. 9P40X1 4 Form X models - Kit No. 9P40X2 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 825 Catalog 1308242 Issued 3-03 P&B P31/P41 series Definite Purpose Magnetic Contactor 16 to 40 Amp Full Load 20 to 50 Amp Resistive P31 File E25575 File LR15734 P41 .. TUV Rheinland P31 No. R 9071107 P41 No. R 9071106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25C * 3 phase and single phase switching. * Integral dual QC terminals. * Class "B" coil insulation. * Variety of main terminals. * Applications include HVAC industrial control. * Direct activated DC coils. Voltage: 12 and 24V DC. See Coil Data table. Power: 8W. Duty Cycle: Continuous. Insulation: Class B. Initial Insulation Resistance: 100 megohms minimum. Coil Data @ +25C Contact Data @ 25C Main Contacts: Arrangements: 3 Form X (3PST-NO-DM) and 4 Form X (4PST-NO-DM). Ratings: See Main Contact Ratings Table. Material: Silver-cadmium oxide. Initial Breakdown Voltage: 2,200V rms minimum between all elements and between all elements to ground. Expected Life: 200,000 operations at motor load. 500,000 operations, mechanical. Minimum Contact Data: 3A @ 120VAC. Code Nominal Voltage DC Resistance in Ohms 10% Must Operate Voltage Nominal Coil Current (mA) DFO DHO 12DC 24DC 21 84 9 18 571 286 *Applicable for vertical or horizontal mounting, but not for upside-down mounting. Note: Coil suppression is recommended for all units. Operate Data @ 25C Must-Operate Voltage: See Coil Data Table. Initial Dielectric Strength Initial Breakdown Voltage: 2,200V rms minimum between all elements and between all elements and ground. Environmental Data Main Contact Ratings @ 25C, 60 Hz. AC (Per Pole) Mechanical Data P31C P31E P41B P41C @ 240VAC LRA FLA @ 480VAC LRA FLA 150 240 120 150 125 200 100 125 25 40 20 25 25 40 20 25 LRA 100 160 80 100 @ 600VAC FLA 25 40 20 25 Temperature Range: -55C to +65C. Mounting: Universal mounting bracket. See Outline Drawings. Termination: Contacts: Dual .250" (6.35mm) quick connect with or without binder head screw or box lug. Coil: Dual .250" (6.35mm) quick connect. Weight: 18 oz. (510g) approximately. RES 35 50 25 35 Ordering Information Typical Part No. 1. Type: P31 = 3 Pole B P41 C 47 D HO 1 03 P41 = 4 Pole 2. Contact Rating C = 25 Amp E = 40 Amp (40A rating only offered on P31) 3. Contact Arrangement: 42 = 3 Form X (3PST-NO-DM) 47 = 4 Form X (4PST-NO-DM) P41 only 4. Coil Input: D = Direct Current (Direct Operated) 5. Coil Voltage: FO = 12VDC, with coil cover HO = 24VDC, with coil cover 6. Coil Terminal Location And Marking (See Terminal Location and Marking Diagram): 1 = Dual .250" (6.35mm) quick connect 7. Contact Terminals (See Contact Terminal Options Diagram): 03 = Dual .250" (6.35mm) quick connect turned up per Figure 03 (25 amps, Max.) 05 = #10-32 binder head screw with dual .250" (6.35mm) quick connect per Figure 05 08 = Aluminum box lug (for #4-#14 copper wire) with dual .250" (6.35mm) quick connect per Figure 08 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Dimensions are shown for 826 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions P31 2.415 MAX. (61.34) .105 .005 R. (2.67 .13) 10 PLACES Top View 2.870 MAX. (72.90) 1.000 .010 (25.40 .25) .062 .005 (1.57 .13) .250 .005 (6.35 .13) COIL TERMINALS 3.125 .010 (79.38 .25) L3 3.250 .010 (82.55 .25) L2 T3 3.800 MAX. (96.52) T2 LOAD SIDE L1 T1 2.725 MAX. (69.22) LINE SIDE .210 .010 (5.33 .25) .210 .010 (5.33 .25) 1.500 .010 (38.10 .25) 2.000 .010 (50.80 .25) 2.550 MAX. (64.77) P41 Top View 2.630 MAX. (66.80) 2.730 MAX. (69.34) .250 .005 (6.35 .13) 1.000 .010 (25.40 .25) 3.125 .010 (79.38 .25) L4 3.250 .010 (82.55 .25) L3 T4 3.800 MAX. (96.52) L2 T3 LOAD SIDE L1 2.725 MAX. (69.22) T2 COIL TERMINALS T1 .105 .005 R. (2.67 .13) 10 PLACES LINE SIDE .210 .010 (5.33 .25) .210 .010 (5.33 .25) 1.500 .010 (38.10 .25) 2.000 .010 (50.80 .25) 2.550 MAX. (64.77) Contact Terminal Options Figure 02 #10-32 UNF-2B Tapped Hole Figure 03 .250" (6.35mm) Quick Connect Turned Up Figure 06 Figure 07 #10-32 UNF-2A X .375" (9.525mm) Screw With #12 Binder Head #10-32 UNF-2A X .500" (12.7mm) Screw With Captive Pressure Plate Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Figure 05 #10-32 UNF-2A X .375" (9.525mm) Binder Head Screw Figure 08 Box Lug Connector Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 827 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED PRELIMINARY DATA Model 2000 series Definite Purpose Contactor 1- or 2-pole, 25-30 FLA AC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25C * Next-generation contactor is smaller and lighter than previous models. * Enclosed case affords contact and coil protection while working in conjunction with plastic mounting base to reduce operational noise level and electrically isolate unit. * Snap-together assembly and reduced part count help to hold down cost. * Design permits direct access to holes in mounting base. Voltage: 24, 100, 120, 200, 208-240 and 277 VAC, 50/60 Hz. Nominal Power: 6 VA (60 Hz.); 8 VA (50 Hz.). Nominal Inrush Power: 25 VA (60 Hz.); 30 VA (50 Hz.). Coil Temperature Rise: 65C Max. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Data @ 25C Operate Data @ 25C Arrangements: 1 Form X (SPST-NO-DM) with or without shunt and 2 Form X (DPST-NO-DM). Maximum Ratings: See Contact Ratings Table. Minimum Ratings: 96VA. Material: Silver Cadmium Oxide. Expected Life (application dependent): 200,000 ops., at rated load. 500,000 ops., mechanical. Must Operate Voltage: 85% of nominal coil voltage or less. Must Release Voltage: 10% of nominal coil voltage or more. Initial Operate Time: 20 ms, typical. Initial Release Time: 10 ms, typical. Max. Bounce Time: 0-10 ms, typical. Contact Ratings Model 25 Amp Contactor 30 Amp Contactor Maximum Voltage VAC Full Load Amps Locked Rotor Amps Resistive Load Amps 277 277 25 30 150 150 30 40 Environmental Data Temperature Range: Storage and Operating: -40C - +65C. Flammability: UL 94-HB housing. Initial Dielectric Strength Mechanical Data Initial Breakdown Voltage: Between Contacts and Coil: 1,600 VAC Between Poles: 1,600 VAC Between Open Contacts: 1,600 VAC Contact Termination: Type: #10-32 Screw with quad 0.250" (6.35 mm) quick connects. Wire Size: 16-8 AWG (Must use ring terminal for 8 AWG wire.) Tightening Torque: 22 in.-lbs. Coil Termination: Dual 0.250" (6.35 mm) quick connects. Weight: 4.93 oz. (140 g) approximately Dimensions are shown for 828 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 2000 - 20 Q 6 999 1. Series: 2000 = 1- or 2-pole, 25-30FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3. Pole Configuration: 10 = 1 Form X (SPST-NO-DM) 15 = 1 Form X (SPST-NO-DM) with Shunt 20 = 2 Form X (DPST-NO-DM) 4. Coil Voltage (50/60 Hz.): Q = 24VAC T = 120VAC P = 100VAC S = 200VAC U = 208/240VAC V = 277VAC 5. Contact Ratings (Inductive): 1 = 25 FLA on 1-pole models 2 = 30 FLA on 1-pole models 5 = 25 FLA on 2-pole models 6 = 30 FLA on 2-pole models 6. Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. 2000-15Q1999 2000-15Q2999 2000-20Q5999 2000-20Q6999 2000-15T1999 2000-15T2999 2000-20T5999 2000-20T6999 2000-15U1999 2000-15U2999 2000-20U5999 2000-20U6999 Outline Dimensions 2.125 (53.975) 2.125 (53.975) 1.625 (41.275) 1.625 (41.275) 3.000 (76.2) 1.625 (41.275) 0.215 DIA (5.461) 4 PLACES 1.625 (41.275) 0.215 DIA (5.461) 4 PLACES Model 2000-20 (two pole) Model 2000-10 (one pole) Model 2000-15 (one pole with shunt) 2.125 (53.975) 3.000 (76.2) 2.125 (53.975) Termination Options STANDARD #10-32 Combination Philliips, Slotted & 5/16 Hex Head #12 Washer SPECIAL #10-32 Sems Screw with Pressure Plate ORDERING NOTE: "Standard" terminals need not be specified in the "Ordering Information" chart above. "Special" terminals are offered on a special order basis. Special order items may be subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 829 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 96 - 3100 series Definite Purpose Contactor 1- or 2-pole, 20-40 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * Robust 1- and 2-pole contactors. * Shunt available on 1-pole models. * Convenient mounting plate. Temperature Range: Storage and Operating: -40C - +65C. Flammability: UL 94-HB housing. Mechanical Data Contact Data @ 25C Contact Termination: 20, 25, 30 FLA Models Type: #10-32 Screw with quad 0.250" (6.35 mm) quick connects. Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.) Tightening Torque: 25 in.-lbs. 40 FLA Models Type: Box Lug with dual 0.250" (6.35 mm) quick connects. Wire Size: 14-4 Cu/Al AWG Tightening Torque: 40 in.-lbs. Coil Termination: Dual 0.250" (6.35 mm) quick connects. Arc Cover: Optional on 20-30 FLA models, standard on 40 FLA models. Weight: One Pole Types: 8 oz. (227 g) approximately. Two Pole Types: 9.6 oz. (273 g) approximately Arrangements: 1 Form X (SPST-NO-DM) with or without shunt and 2 Form X (DPST-NO-DM). Maximum Ratings: See Contact Ratings Table. Material: Silver Cadmium Oxide. Coil Data @ 25C Voltage: 24 - 277 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Ratings Full Load Amps Number of Poles 20 2 25 1 25 2 30 1 30 2 40 1 40 2 Line Voltage 240/277 480 600 240/277 480 600 240/277 480 600 240/277 480 600 240/277 480 600 240/277 480 600 240/277 480 600 Locked Rotor Amps 120 100 80 150 50 40 150 125 100 150 75 50 150 125 100 240 200 160 240 200 160 Resistive Amps Rating 30 30 30 30 30 30 35 35 35 40 40 40 40 40 40 50 50 50 50 50 50 Maximum Horsepower Voltage Single Phase 120 2 240 3 120 240 1 2 120 240 2 3 120 240 1 2 120 240 2 3 120 240 2 3 120 240 2 3 Coil Data Nominal Coil Voltage Maximum Pickup Volts Drop-Out Volts Range Nominal Inrush VA @ 50 Hz Nominal Inrush VA @ 60 Hz Nominal Sealed VA @ 50 Hz Nominal Sealed VA @ 60 Hz Nominal DC Resistance - Ohms Dimensions are shown for 830 reference purposes only. 24 18 6 - 15 22.5 20 7 5.25 16.5 1-Pole Models 120 88 20 - 70 22.5 20 7 5.25 420 Dimensions are in inches over (millimeters) unless otherwise specified. 208/240 177 40 - 140 22.5 20 7 5.25 1850 277 221 50 - 165 22.5 20 7 5.25 2650 24 18 6 - 15 37 35 8 7 11 Specifications and availability subject to change. 2-Pole Models 120 88 20 - 70 37 35 8 7 250 208/240 177 40 - 140 37 35 8 7 1000 277 221 50 - 165 37 35 8 7 1600 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 20 Q 6 999 1. Series: 3100 = 1- or 2-pole, 20-40 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 10 = 1 Form X (SPST-NO-DM) 15 = 1 Form X (SPST-NO-DM) with Shunt 20 = 2 Form X (DPST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC T = 120VAC U = 208/240VAC P = 100VAC S = 200VAC V = 277VAC 5.Contact Ratings (Inductive): 1 = 25 FLA on 1-pole models 3 = 20 FLA on 2-pole models 2 = 30 FLA on 1-pole models 5 = 26 FLA on 2-pole models 14 = 35 FLA on 1-pole models 6 = 30 FLA on 2-pole models 19 - 40 FLA on 1-pole models 18 = 40 FLA on 2-pole models 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. 3100-15Q2999 3100-15T2999 3100-15U2999 3100-20Q18999CL 3100-20T18999CL 3100-20U18999CL 3100-20Q6999 3100-20T6999 3100-20U6999 Outline Dimensions Termination Options 2.10 Max. (53.3) 1-Pole .253 (6.43) 3.30 (83.8) 2.445 (62.1) 1.625 (41.3) 2.00 (50.8) .215 TYP (5.46) Standard on 20, 25, 30, 35 FLA #10-32 Combination Phillips, Slotted & 5/16 Hex Head #12 Washer Special on 20, 25, 30, 35 FLA #10-32 Sems Screw with Pressure Plate Standard on 40 FLA Lug accepts 14-4 Cu/Al AWG 2.541 (64.5) 2.10 Max. (53.3) 2-Pole 3.30 (83.8) 2.445 (62.1) 1.625 .875 (41.28) (22.2) 2.313 (57.75) 1.625 .875 (41.28) (22.2) 2.313 (57.75) 1.625 (41.3) 2.00 (50.8) .215 TYP (5.46) 2.610 (66.3) ORDERING NOTE: "Standard" terminals need not be specified in the "Ordering Information" chart above. "Special" terminals are offered on a special order basis. Special order items may be subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 831 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 98 - 3100 series Definite Purpose Contactor 3-pole, 20-40 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * 3-pole contactors. * Industry-standard mounting plate. * Optional interlock/auxiliary switches available. * Manual test button is standard. * Coil dust cover helps keep dust and dirt away from magnet and coil area. * Double E magnet system provides optimal performance. Temperature Range: Storage and Operating: -40C - +65C. Flammability: UL 94-HB housing. Mechanical Data Contact Termination: 20, 25, 30 FLA Models Type: #10-32 Screw with quad 0.250" (6.35 mm) quick connects. Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.) Tightening Torque: 25 in.-lbs. 40 FLA Models Type: Box Lug with dual 0.250" (6.35 mm) quick connects. Wire Size: 14-4 Cu/Al AWG Tightening Torque: 40 in.-lbs. Coil Termination: Dual 0.250" (6.35 mm) quick connects, standard. A 0.250" quick connect and a #6-32 screw, optional. Arc Cover: Optional on 20-30 FLA models, standard on 40 FLA models. Weight: 16 oz. (455 g) approximately Contact Data @ 25C Arrangements: 3 Form X (3PST-NO-DM). Maximum Ratings: See Contact Ratings Table. Material: Silver Cadmium Oxide. Coil Data @ 25C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Ratings Full Load Amps Number of Poles 20 3 25 Line Voltage 240/277 480 600 Locked Rotor Amps 120 100 80 Resistive Amps Rating 30 30 30 3 240/277 480 600 150 125 100 35 35 35 30 3 240/277 480 600 180 150 120 40 40 40 40 3 240/277 480 600 240 200 160 50 50 50 Nominal Coil Voltage Maximum Pickup Volts Drop-Out Volts Range Nominal Inrush VA @ 50 Hz Nominal Inrush VA @ 60 Hz Nominal Sealed VA @ 50 Hz Nominal Sealed VA @ 60 Hz Nominal DC Resistance - Ohms 24 18 6 -15 60 53 6.0 5 7 Voltage 110/120 200/240 480/600 110/120 200/208 240/277 480 600 110/120 200/208 240/277 480 600 110/120 200/208 240/277 480 600 Maximum Horsepower Single Phase 1.5 3 2 5 2 5 3 7.5 - Three Phase 7.5 7.5 7.5 10 15 20 10 10 15 20 10 10 20 25 Coil Data Dimensions are shown for 832 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 120 88 20 - 70 60 53 6.0 5 180 208/240 177 40 - 140 60 53 6.0 5 720 Specifications and availability subject to change. 277 220 65 - 185 60 53 6.0 5 950 480 384 150 - 270 65 53 6.0 5 3100 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 30 Q 9 999 1. Series: 3100 = 3-pole, 20-40 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 7 = 20 FLA 8 = 25 FLA 9 = 30 FLA 10 = 40 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. 3100-30Q9999CY 3100-30T9999CY 3100-30U9999CY 3100-30Q10999CG 3100-30T10999CG 3100-30U10999CG Termination Options Outline Dimensions 2.97 1.78 (75.44) 1.19 (45.21) (30.23) 3.00 (76.2) 2.00 (50.8) .250 TYP. (6.35) .253 (6.43) 3.25 (82.55) .203 TYP. (5.156) .455 DIA. (11.56) 2.39 (86.1) 2.0 MAX. (50.8) 3.75 (95.25) .125 .203 TYP. (3.175) (5.156) 2.375 TYP. (60.325) Shown with Optional Auxiliary Switches Standard on Special on 20, 25, 30, 35 FLA 20, 25, 30, 35 FLA #10-32 Combination #10-32 Sems Phillips, Slotted & Screw 5/16 Hex Head with Pressure #12 Washer Plate Standard on 40 FLA Lug accepts 14-4 Cu/Al AWG ORDERING NOTE: "Standard" terminals need not be specified in the "Ordering Information" chart above. "Special" terminals are offered on a special order basis. Special order items may be subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Auxiliary Switches Various interlock / auxiliary switches are available for the Model 98 contactor. All auxiliary switches for the Model 98 are snap-on design, no tools required. Equipped with 0.250" (6.35) Quick Connect Terminals Factory Modifications Contact Config. NO NC Single unit interlock 1 0 configurations listed. 0 1 Maximum of two. 1 1 (One on each side.) 2 0 0 2 See footnote (1) for ratings. 2 2 SPDT Circuit 1 1 (Either one or two 2 2 switches per side.) 2 2 See footnote (2) for ratings. 4 4 SPDT Dry Circuit 1 1 0.1 amp max. 2 2 Gold Flashed Contacts 4 4 Description ONE SPDT SWITCH PER SIDE TWO SPDT SWITCHES PER SIDE 1 N/O / 1 N/C Field Added Kits Kit Catalog Number of Number Kits Required 98220-303 1 98220-331 1 98220-332 1 98220-303 2 98220-331 2 98220-332 2 98220-337 1 98220-338 1 98220-337 2 98220-338 2 98220-341 1 98220-340 1 98220-340 2 Equipped with #6-32 Screw Terminals & Saddle Clamps Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC and two circuit NO/NC: 120V 240V 480V 600V Amperes - Break 3.0 1.5 0.75 0.6 Amperes - Make 30 15 7.5 6 Amperes - Continuous 10 10 10 10 (2) Contact Rating SPDT (337): 10A, 1/3 HP, 125 or 250 VAC 1/2A, 125 VDC; 1/4A, 250 VDC: 4A 120 VAC on Lamp Load Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Factory Modifications Contact Config. NO NC Single unit interlock 1 0 configurations listed. 0 1 Maximum of two. 1 1 (One on each side.) 2 0 0 2 See footnote (1) for ratings. 2 2 Description Specifications and availability subject to change. Field Added Kits Kit Catalog Number of Number Kits Required 98220-303 1 98220-331 1 98220-332 1 98220-303 2 98220-331 2 98220-332 2 www.tycoelectronics.com Technical support: Refer to inside back cover. 833 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 93 - 3100 series Definite Purpose Contactor 3-pole, 50-60 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * 3-pole contactors. * Convenient "universal" mounting plate. * Optional interlock/auxiliary switches available. Temperature Range: Storage and Operating: -40C - +65C. Flammability: UL 94-HB housing. Mechanical Data Contact Termination: Type: Box Lug with dual 0.250" (6.35 mm) quick connects. Wire Size: 14-2 Cu/Al AWG Tightening Torque: 50 in.-lbs. Coil Termination: Dual 0.250" (6.35 mm) quick connects, standard. A 0.250" quick connect and a #6-32 screw, optional. Arc Cover: Standard. Weight: 32 oz. (910 g) approximately Contact Data @ 25C Arrangements: 3 Form X (3PST-NO-DM). Maximum Ratings: See Contact Ratings Table. Material: Silver Cadmium Oxide. Coil Data @ 25C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Ratings Full Load Amps Number of Poles Line Voltage Locked Rotor Amps Resistive Amps Rating 50 3 240 480 600 300 250 200 65 65 65 60 3 240 480 600 360 300 240 75 75 75 Voltage Maximum Horsepower Single Phase Three Phase 110/120 200/208 240/277 480 600 110/120 200/208 240/277 480 600 3 7.5 10 5 7.5 10 - 15 15 25 25 25 25 30 30 Coil Data Nominal Coil Voltage Maximum Pickup Volts Drop-Out Volts Range Nominal Inrush VA @ 50 Hz Nominal Inrush VA @ 60 Hz Nominal Sealed VA @ 50 Hz Nominal Sealed VA @ 60 Hz Nominal DC Resistance - Ohms Dimensions are shown for 834 reference purposes only. 24 182 6 -15 140 132 20 14 2.4 Dimensions are in inches over (millimeters) unless otherwise specified. 120 93 20 - 70 140 132 20 14 45 208/240 177 40 - 135 140 132 20 14 180 Specifications and availability subject to change. 277 235 50-180 140 132 20 14 280 480 374 120 - 286 140 132 20 14 852 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 30 Q 16 999 1. Series: 3100 = 3-pole, 50-60 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 16 = 50 FLA 17 = 60 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. None at present. Termination Outline Dimensions 3.563 (90.5) 3.10 (78.7) 2.75 (69.9) .218 TYP. (5.537) .438 (11.12) 2.032 (51.61) .250 (6.35) .253 (6.43) 3.25 (82.55) 3.75 (95.25) 2.65 (67.3) 3.19 (81.03) 1.468 (37.29) 2.242 (56.95) Standard on 50-60 FLA Lug accepts 14-2 Cu/Al AWG .250 (6.35) Shown with Optional Auxiliary Switch Auxiliary Switches Various interlock / auxiliary switches are available for the Model 93 contactor. Equipped with 0.250" (6.35) Quick Connect Terminals Factory Modifications Contact Config. NO NC Single unit interlock 1 0 configurations listed. 0 1 Maximum of two. Must 1 1 be same polarity. 2 0 See footnote (1) for ratings. 0 2 2 2 SPDT Circuit 1 1 See footnote (2) for ratings. 2 2 SPDT Dry Circuit, 0.1 amp max. 1 1 Gold Flashed Contacts 2 2 Description NORMALLY OPEN -303 STYLE NORMALLY OPEN & CLOSED -332 STYLE NORMALLY CLOSED -331 STYLE SPDT -337 & -341 STYLE Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34300-342 1 configurations listed. 0 1 34300-343 1 Maximum of two. Must 1 1 34300-344 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC 1/2A, 125 VDC; 1/4A, 250 VDC: 120V 240V 480V 600V Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A W/ #6-32 SCREW & SADDLE CLAMP -344 STYLE Dimensions are shown for reference purposes only. Field Added Kits Kit Catalog Number of Number Kits Required 34300-303 1 34300-331 1 34300-332 1 34300-303 2 34300-331 2 34300-332 2 34300-337 1 34300-337 2 34300-341 1 34300-340 1 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 835 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 93 - 3100 series Definite Purpose Contactor 4-pole, 25-40 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * 4-pole contactors. * Convenient "universal" mounting plate. * Optional interlock/auxiliary switches available. Temperature Range: Storage and Operating: -40C - +65C. Flammability: UL 94-HB housing. Mechanical Data Contact Termination: 25, 30 FLA Models Type: #10-32 Screw with quad 0.250" (6.35 mm) quick connects. Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.) Tightening Torque: 25 in.-lbs. 40 FLA Models Type: Box Lug with dual 0.250" (6.35 mm) quick connects. Wire Size: 14-4 Cu/Al AWG Tightening Torque: 40 in.-lbs. Coil Termination: Dual 0.250" (6.35 mm) quick connects, standard. A 0.250" quick connect and a #6-32 screw, optional. Arc Cover: Optional on 25-30 FLA models, standard on 40 FLA models. Weight: 24 oz. (683 g) approximately Contact Data @ 25C Arrangements: 4 Form X (4PST-NO-DM). Maximum Ratings: See Contact Ratings Table. Material: Silver Cadmium Oxide. Coil Data @ 25C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Ratings Full Load Amps Number of Poles Line Voltage Locked Rotor Amps Resistive Amps Rating 25 3 240/277 480 600 150 125 100 35 35 35 30 3 240/277 480 600 180 150 120 40 40 40 40 3 240/277 480 600 240 200 160 50 50 50 Nominal Coil Voltage Maximum Pickup Volts Drop-Out Volts Range Nominal Inrush VA @ 50 Hz Nominal Inrush VA @ 60 Hz Nominal Sealed VA @ 50 Hz Nominal Sealed VA @ 60 Hz Nominal DC Resistance - Ohms 24 19.2 6 -15 68 60 14 9 5 Voltage Maximum Horsepower Single Phase Three Phase 110/120 200/208 240/277 480 110/120 200/208 240/277 480 110/120 200/208 240/277 480 2 5 2 5 3 7.5 - 7.5 10 15 10 10 15 10 10 20 Coil Data Dimensions are shown for 836 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 120 93 20 - 70 68 60 14 9 148 208/240 177 40 - 140 68 60 14 9.5 520 Specifications and availability subject to change. 277 220 50-185 58 52 11 9.5 750 480 384 150 - 270 48 52 11 9 2700 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 40 Q 9 999 1. Series: 3100 = 4-pole, 25-40 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 40 = 4 Form X (4PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 8 = 25 FLA 9 = 30 FLA 10 = 40 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. None at present. Termination Options Outline Dimensions 3.055 (77.6) .250 (6.35) 2.00 (50.8) .250 (6.35) .253 (6.43) 3.25 (82.55) 3.125 (79.38) 3.75 (95.25) 2.493 (63.3) 2.633 (66.9) .203 TYP (5.156) .203 TYP (5.156) Standard on 25, 30 FLA #10-32 Combination Phillips, Slotted & 5/16 Hex Head #12 Washer Special on 25, 30 FLA #10-32 Sems Screw with Pressure Plate Standard on 40 FLA Lug accepts 14-4 Cu/Al AWG ORDERING NOTE: "Standard" terminals need not be specified in the "Ordering Information" chart above. "Special" terminals are offered on a special order basis. Special order items may be subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Shown with Optional Auxiliary Switch Auxiliary Switches Various interlock / auxiliary switches are available for the Model 93 contactor. Equipped with 0.250" (6.35) Quick Connect Terminals Factory Modifications Contact Config. NO NC Single unit interlock 1 0 configurations listed. 0 1 Maximum of two. Must 1 1 be same polarity. 2 0 See footnote (1) for ratings. 0 2 2 2 SPDT Circuit 1 1 See footnote (2) for ratings. 2 2 SPDT Dry Circuit, 0.1 amp max. 1 1 Gold Flashed Contacts 2 2 Description NORMALLY OPEN -303 STYLE NORMALLY OPEN & CLOSED -332 STYLE NORMALLY CLOSED -331 STYLE SPDT -337 & -341 STYLE Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34220-342N 1 configurations listed. 0 1 34220-343N 1 Maximum of two. Must 1 1 34220-344N 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC 1/2A, 125 VDC; 1/4A, 250 VDC: 120V 240V 480V 600V Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A W/ #6-32 SCREW & SADDLE CLAMP -344 STYLE Dimensions are shown for reference purposes only. Field Added Kits Kit Catalog Number of Number Kits Required 34220-303N 1 34220-331N 1 34220-332N 1 34220-303N 2 34220-331N 2 34220-332N 2 34220-337N 1 34220-337N 2 34220-341N 1 34220-340N 1 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 837 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 96 - 3186 series Definite Purpose Contactor 3-pole, 75-90 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * 3-pole contactors. * Convenient "universal" mounting plate. * Optional interlock/auxiliary switches available. Temperature Range: Storage and Operating: -40C - +65C. Flammability: UL 94-HB housing. Mechanical Data Contact Termination: Type: Box Lug with dual 0.250" (6.35 mm) quick connects. Wire Size: 14-1/0 Cu/Al AWG Tightening Torque: 50 in.-lbs. Coil Termination: 0.250" quick connect and a #6-32 screw. Arc Cover: Standard. Weight: 64 oz. (1820 g) approximately Contact Data @ 25C Arrangements: 3 Form X (3PST-NO-DM). Maximum Ratings: See Contact Ratings Table. Material: Silver Cadmium Oxide. Coil Data @ 25C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Ratings Full Load Amps Number of Poles Line Voltage Locked Rotor Amps Resistive Amps Rating 75 3 240 480 600 450 375 399 93 93 93 90 3 240 480 600 540 450 360 120 120 120 Voltage Maximum Horsepower Single Phase Three Phase 110/120 200/208 240/277 480 600 110/120 200/208 240/277 480 600 5 10 15 7.5 15 20 - 20 25 40 25 25 30 50 50 Coil Data Nominal Coil Voltage Maximum Pickup Volts Drop-Out Volts Range Nominal Inrush VA @ 50 Hz Nominal Inrush VA @ 60 Hz Nominal Sealed VA @ 50 Hz Nominal Sealed VA @ 60 Hz Nominal DC Resistance - Ohms Dimensions are shown for 838 reference purposes only. 24 18 6 -15 285 240 42 27 .63 Dimensions are in inches over (millimeters) unless otherwise specified. 120 88 20 - 70 285 240 42 27 15.6 208/240 177 40 - 110 285 240 42 27 63.5 Specifications and availability subject to change. 277 220 65-185 285 240 42 27 84 480 384 150 - 270 285 240 42 27 255 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3186 - 30 Q 90 999 1. Series: 3186 = 3-pole, 75-90 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 75 = 75 FLA 90 = 90 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. None at present. Outline Dimensions 4.062 (103.2) Termination 2.875 (73.02) 2.50 (63.5) 4.187 (106.3) 3.75 (95.25) .406 (10.31) 3.75 (95.25) 5.00 (127.01) Standard on 75-90 FLA Lug accepts 14-1/0 Cu/Al AWG 4.625 (117.5) .188 (4.78) 2.25 (57.15) 2.50 (63.5) 2.875 (73.02) .203 (5.16) Shown with Optional Auxiliary Switch Auxiliary Switches Various interlock / auxiliary switches are available for the Model 96 contactor. Equipped with 0.250" (6.35) Quick Connect Terminals Factory Modifications Contact Config. NO NC Single unit interlock 1 0 configurations listed. 0 1 Maximum of two. Must 1 1 be same polarity. 2 0 See footnote (1) for ratings. 0 2 2 2 SPDT Circuit 1 1 See footnote (2) for ratings. 2 2 SPDT Dry Circuit, 0.1 amp max. 1 1 Gold Flashed Contacts 2 2 Description NORMALLY OPEN -303 STYLE NORMALLY OPEN & CLOSED -332 STYLE NORMALLY CLOSED -331 STYLE SPDT -337 & -341 STYLE Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34300-342 1 configurations listed. 0 1 34300-343 1 Maximum of two. Must 1 1 34300-344 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC 1/2A, 125 VDC; 1/4A, 250 VDC: 120V 240V 480V 600V Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A W/ #6-32 SCREW & SADDLE CLAMP -344 STYLE Dimensions are shown for reference purposes only. Field Added Kits Kit Catalog Number of Number Kits Required 34300-303 1 34300-331 1 34300-332 1 34300-303 2 34300-331 2 34300-332 2 34300-337 1 34300-337 2 34300-341 1 34300-340 1 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 839 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model A - 3100 series Definite Purpose Contactor 3-pole, 120 FLA AC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * 3-pole contactors. * Convenient "universal" mounting plate. * Optional interlock/auxiliary switches available. Temperature Range: Storage and Operating: -40C - +65C. Flammability: UL 94-HB housing. Mechanical Data Contact Termination: Type: Box Lug with dual 0.250" (6.35 mm) quick connects. Wire Size: 2 - 4-0 Cu/Al AWG Tightening Torque: 100 in.-lbs. Coil Termination: 0.250" quick connect and a #6-32 screw. Arc Cover: Standard. Weight: 128 oz. (3640 g) approximately Contact Data @ 25C Arrangements: 3 Form X (3PST-NO-DM). Maximum Ratings: See Contact Ratings Table. Material: Silver Cadmium Oxide. Coil Data @ 25C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130C). Duty Cycle: Continuous. Contact Ratings Full Load Amps Number of Poles Line Voltage Locked Rotor Amps Resistive Amps Rating Voltage Maximum Horsepower Single Phase Three Phase 120 3 240 480 600 720 600 480 150 150 150 110/120 200/208 240 480 600 10 20 25 - 30 40 75 75 Coil Data Nominal Coil Voltage Maximum Pickup Volts Drop-Out Volts Range Nominal Inrush VA @ 50 Hz Nominal Inrush VA @ 60 Hz Nominal Sealed VA @ 50 Hz Nominal Sealed VA @ 60 Hz Nominal DC Resistance - Ohms Dimensions are shown for 840 reference purposes only. 24 20.4 6 -15.6 470 400 43 40 .264 Dimensions are in inches over (millimeters) unless otherwise specified. 120 93 20 - 70 600 510 50 48 4.73 208/240 176 40 - 135 600 510 50 48 18.6 Specifications and availability subject to change. 277 235 65-180 600 510 50 40 30.25 480 374 150 - 270 - 510 - 48 78 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 30 Q 120 999 1. Series: 3100 = 3-pole, 120 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 120 = 120 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. 3100Y30Q120999CJ 3100Y30T120999CJ 3100Y30U120999CJ Termination Outline Dimensions 5.00 (127.0) 4.625 (117.48) 2.50 (63.5) CLEARANCE FOR #10 SCREW .563 (14.3) 4.437 (112.7) 6.375 (161.92) 6.00 (152.4) 4.625 (117.47) 5.10 (129.54) .265 (6.73) 2.5 (63.5) 2.875 (73.025) Shown with Optional Auxiliary Switch 3.25 (82.55) Standard on 120 FLA Lug accepts 14-0 Cu/Al AWG .187 (4.75) .203 DIA. (5.16) Auxiliary Switches Various interlock / auxiliary switches are available for the Model A contactor. Equipped with 0.250" (6.35) Quick Connect Terminals Factory Modifications Contact Config. NO NC Single unit interlock 1 0 configurations listed. 0 1 Maximum of two. Must 1 1 be same polarity. 2 0 See footnote (1) for ratings. 0 2 2 2 SPDT Circuit 1 1 See footnote (2) for ratings. 2 2 SPDT Dry Circuit, 0.1 amp max. 1 1 Gold Flashed Contacts 2 2 Description NORMALLY OPEN -303 STYLE NORMALLY OPEN & CLOSED -332 STYLE NORMALLY CLOSED -331 STYLE SPDT -337 & -341 STYLE Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34300-342 1 configurations listed. 0 1 34300-343 1 Maximum of two. Must 1 1 34300-344 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC 1/2A, 125 VDC; 1/4A, 250 VDC: 120V 240V 480V 600V Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A W/ #6-32 SCREW & SADDLE CLAMP -344 STYLE Dimensions are shown for reference purposes only. Field Added Kits Kit Catalog Number of Number Kits Required 34300-303 1 34300-331 1 34300-332 1 34300-303 2 34300-331 2 34300-332 2 34300-337 1 34300-337 2 34300-341 1 34300-340 1 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 841 Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Engineering Notes Dimensions are shown for 842 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 LATCHING, IMPULSE, ROTARY & SPECIAL APPLICATION RELAYS Alphanumeric Index Series Type Page 136 ....................... Traffic Light (Flash Transfer) Relay ........ 916 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 GP ........................ Control Relay ......................................... 917 KBP ...................... Mechanical Latching Relay ................... 910 KUL ...................... Magnetic Latching Relay ....................... 908 MDR ..................... Rotary Relay (High Shock Resistance) .. 914 ML ........................ Magnetic Latching Control Relay .......... 917 TR ......................... Timing Control Relay ............................. 917 PE (latching) ......... Magnetic Latching Relay ....................... 902 PCKWK ................. Magnetic Latching Relay ....................... 904 RT (latching) ......... Magnetic Latching Relay ....................... 906 S89R/S90R ........... Impulse Relay ....................................... 912 NOTE: In addition to the products listed in this section of the databook, we offer latching versions of some of our Low-signal Board Relays other relayPC series. Following is a list301-338 of these products: 3 Low Signal Relays FP2 ........................................................................... 323 FX2 ........................................................................... 329 Mid-Range PC Board Relays ....... 19-21 IM ............................................................................. 321 V23026 (P1) .............................................................. 314 V23079 (P2) .............................................................. 325 4 Power PC Board Relays ................ 22-35 Mid-range PC Board Relays 5 0409 ......................................................................... 488 RP 3 SL .................................................................... 486 V23148 (U/UB) ......................................................... 428 Relays with Many of the products in our line of high36-79 performance Forcibly-Guided Contacts.............. 6 relays and contactors (see overview in section 14 of this databook) are also offered as latching devices. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Plug-in/Panel Mount General Purpose Relays................ 80-88 7 Power Relays & Definite Purpose Contactors...................... 89-131 8 Latching, Impulse, Rotary & Special Application Relays ... 901-920 9 Automotive Relays ...................... 141-148 10 Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Specifications and availability subject to change. www.tycoelectronics.com Technical support: 901 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK PE Latching series 5 Amp, Miniature, Single Coil Printed Circuit Board Relay File E38891 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Mechanical Data Features * * * * * * * 1 Form C (SPDT). Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Flux-tight plastic case. Weight: 0.18 oz. (5 g) approximately. 5 amp rated current. 10mm height. Flux-tight for wave soldering. Supplied in tubes. DIP configuration. 4kV coil-to-contact insulation. Contact Life Contact Data Arrangement: 1 Form C (SPDT). Material: Silver-nickel 90/10. Expected Mechanical Life: 5 million operations. Ratings: 5 amp 250VAC resistive 100,000 operations. Initial Dielectric Strength Between Open Contacts: 1,000VAC. Between Coil and Contacts: 4,000VAC. Creepage/Clearance Coil-Contact: >3.2/4mm. Coil Data @ 20C Nominal Coil Power: 360mW. Nominal Voltage VDC DC Resistance in Ohms 10% Pull-in Voltage VDC 03 05 06 12 24 25 69 100 400 1,600 2.25 3.75 4.5 9.0 18.0 Reset Voltage VDC Nominal Coil Current (mA) 2.25 3.75 0.6 1.2 2.4 Max. DC Load Breaking Capacity 120.0 72.0 60.0 30.0 15.0 Operate Data Minimum Energization Time: 20 ms, at nom. voltage. (Consult factory on information on reduced pulse duration at higher voltages.) Maximum Energization Time: 1 min. at 10% duty cycle. Maximum Reset Voltage: 120% of nominal voltage at -40C. Switching Rate: 360 ops./hr. max. at rated load. Coil Operating Range Coil Operation Version Coil Terminals Pull-In Polarity Reset Polarity Note: Contact position not A.. A1 + - defined at C.. A2 - + delivery. A1 - + A2 + - Environmental Data Temperature Range: Operating: -40C to +70C. Shock (Destructive): >100g. Dimensions are shown for 902 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B SCHRACK PE 0 1 4 A06 1. Basic Series: PE = Miniature printed circuit board relay. 2. Enclosure*: 0 = Flux-tight. 3. Contact Arrangement: 1 = 1 Form C (SPDT) 4. Contact Material: 4 = Silver-nickel 90/10 5. Coil Type & Voltage (see Coil Data table and Coil Operation table for details): A03 = 3VDC, positive voltage applied to Terminal A1 results in pull-in. C03 = 3VDC, positive voltage applied to Terminal A2 results in pull-in. A05 = 5VDC, positive voltage applied to Terminal A1 results in pull-in. C05 = 5VDC, positive voltage applied to Terminal A2 results in pull-in. A06 = 6VDC, positive voltage applied to Terminal A1 results in pull-in. C06 = 6VDC, positive voltage applied to Terminal A2 results in pull-in. A12 = 12VDC, positive voltage applied to Terminal A1 results in pull-in. C12 = 12VDC, positive voltage applied to Terminal A2 results in pull-in. A24 = 24VDC, positive voltage applied to Terminal A1 results in pull-in. C24 = 24VDC, positive voltage applied to Terminal A2 results in pull-in. * Sealed version available on request. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .787 (20.0) .394 (10.0) 12 A2 .394 (10.0) 14 .055 (1.4) 11 A1 .149 (3.8) PC Board Layout (Bottom View) .051 + 0.004 -0 1.3 + 0.1 -0 ( .30 (7.62) ) .047 (1.2) .30 (7.62) .70 (17.78) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 903 Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCKWK series Latching, Slim 16Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * Efficient, latching operation. * Slim outline to save board space. * 1 Form A contact arrangement. PCKWK Rated Coil SET Coil Voltage Resistance (VDC) (ohms) 10% 12 RESET Coil SET Coil RESET Coil Resistance Voltage Range Voltage Range (ohms) 10% (VDC) (VDC) 80 180 6.0 - 9.0 2.0 - 7.0 Contact Data @ 20C Arrangements: 1 Form A (SPST-NO). Material: Ag Alloy. Max. Switching Rate: 300 ops./ min. (no load). 20 ops./ min. (rated load). Expected Mechanical Life: 5 million ops (no load). Expected Electrical Life: 100,000 ops (16A @ 250VAC). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data @ 20C SET Time: 10 ms max. (including bounce) at rated voltage. 8 ms max. (including bounce) at 130% rated voltage. RESET Time: 10 ms max. at rated voltage. 8 ms max. at 130% rated voltage. The pulse to either the set or reset coil of the PCKWK relay should be no less than 30 milliseconds duration, and no more than 1 second duration. Contact Ratings Observe coil polarity. Ratings: 16A @ 277VAC resistive. Max. Switched Voltage: AC: 277V. Max. Switched Current: 16A. Max. Switched Power: 4,432VA. Do not apply voltage to both SET and RESET coils simultaneously. External magnetic fields may affect the operation of the relay. Initial Dielectric Strength Between Open Contacts: 1,000VAC, 50/60 Hz. (1 min.); 1,200VAC, 50/60 Hz. (1 sec.). Between Contacts and Coil: 4,000VAC, 50/60 Hz. (1 min.); 4,800VAC, 50/60 Hz. (1 sec.). Surge Voltage Between Coil and Contacts: 10,000V (1.2/50s). Initial Insulation Resistance Environmental Data Temperature Range: Operating: -30C to +70C. Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude for 2 hr. Operational: 10 to 55Hz., 1.5mm double amplitude for 5 min. Shock, Mechanical: 980m/s2. Operational (when SET): 98m/s2. Operational (when RESET): 980m/s2. Operating Humidity: 20 to 65% RH. (Non-condensing). Between Mutually Insulated Conductors: 1,000Mohm @ 500VDC. Coil Data Voltage: 12VDC (Consult factory for other coil voltage). Nominal Power: 1.8W (SET). 800mW (RESET). Max. Coil Power: 130% of nominal at 20C. Dimensions are shown for 904 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: Printed circuit terminals. Enclosure: Vented (Flux-tight) plastic cover. Weight: 0.49 oz (14g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information Typical Part Number B OEG PCKWK -1 12 D 2 M ,000 1. Basic Series: PCKW = 16A double coil relay 2. Termination: 1 = 1 pole 3. Coil Voltage: 12= 12VDC Consult factory for other voltages. 4. Coil Input: D = Standard 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: M = 1 Form A (SPST-NO) 7. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .457 (11.60) .957 (24.30) + RESET COIL + SET COIL - 1.05 (26.7) .039 (1.0) .138 (3.5) .039 (1.0) .039 (1.0) .039 (1.0) .012 (.3) .102 (2.60) .043 (1.10) .171 (4.35) .677 (17.20) .171 (4.35) .677 (17.20) .295 (7.50) .026 (0.65).027 (0.70) 5 - .059 DIA (1.50) Dimensions are shown for reference purposes only. .027 (0.70) .026 (0.65) .295 (7.50) .181 (4.60) .043 (1.10) PC Board Layout (Bottom View) .059 (1.50) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. .059 (1.50) .033 (0.85) www.tycoelectronics.com Technical support: 905 Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RT series (Latching) 16 Amp Miniature Printed Circuit Board Relay File E38891 NR 6106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20C * * * * * * * Voltage: 5 to 24VDC*, 1 coil. 3 to 24VDC*, 2 coil. Nominal Power @ 25C: 400mW, 1 coil. 600mW, 2 coil. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 20C, 500VDC and 50% rel. humidity. Coil Construction: UL Class F (155C). Latching relay with 1 or 2 coils. SPDT (16A) and DPDT (8A) contact arrangements. Flux tight enclosure. Meets VDE 10mm spacing, 5kV dielectric, coil to contacts. Conforms to UL 508, 1873 and 353. UL Class F (155C) coil construction Schrack brand * Other coil voltages upon request. 1 Coil Data Contact Data Arrangements: 1 Form C (SPDT) Wiring Diagram Code 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 5 million operations, 1 pole. 2 million operations, 2 pole. Designed to meet UL/CSA/VDE ratings with relay properly vented. Remove vent nib after soldering and cleaning. UL/CSA ratings @ 70C: Code NO/NC Load Type Operations 3 16A/8A @ 240VAC 8A @ 28VDC 1/2 HP @ 120VAC* 1HP @ 240VAC* 48 LRA, 8 FLA @ 240VAC B300 GP Resistive Motor Motor Motor Pilot Duty 6K 30K 6K 6K 30K 6K 5 8A @ 240VAC 8A @ 28VDC 1/2 HP @ 240VAC 1/4 HP @ 120VAC B300 Resistive Resistive/GP Motor Motor Pilot Duty 30K 30K 6K 6K 6K * Form A only VDE Ratings @ 70C: Code NO/NC Load Type Operations 3 16A@ 250VAC 8A @ 250VAC Resistive Resistive 10K 30K 5 8A @ 250VAC 8A @ 250VAC Resistive Resistive 30K 100K Nominal Voltage VDC DC Resistance in Ohms 10% Set Voltage VDC Reset Voltage VDC Nominal Coil Current (mA) 05 06 12 24 62 90 360 1,440 3.5--6.0 4.2--7.2 8.4--14.4 16.8--28.8 2.75--6.0 3.30--7.2 6.60--14.4 13.20--28.8 80.0 66.7 33.3 16.7 Nominal Voltage VDC DC Resistance in Ohms 10% Set Voltage VDC Reset Voltage VDC Nominal Coil Current (mA) 05 06 12 24 42 55 240 886 3.5--7.5 4.2--9.0 8.4--18.0 16.8--36.0 2.75--4.5 3.30--9.0 6.60--18.0 13.20--36.0 120.0 108.0 50.0 27.0 2 Coil Data Operate Data @ 20C Must Operate Voltage: See coil data. Operate Time (Excluding Bounce): 5 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 4 ms, typ., at nom. voltage. Max. Switching Rate: 360 ops. at rated load. Environmental Data Temperature Range: Storage: -40C to +105C. Operating: -40C to +70C at rated current. Vibration: 30 - 500 Hz: N/C opens at >3g and changes from reset to set at >5g; Shock: N/C opens at >6g and changes from reset to set at >15g.; Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Creepage/Clearance, Coil to Contact: 10/10mm. Termination: Printed circuit terminals. Enclosures: RT 3, 4: Flux-tight, top vented, plastic case. Weight: 0.46 oz. (13g) approximately. Dimensions are shown for 906 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information (Latching Model) Typical Part Number B RT 3 2 4 A05 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram code 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10. 5. Coil Voltage: 1 Coil A05 A06 A12 A24 2 Coil F05 F06 F12 F24 Voltage = 5VDC = 6VDC = 12VDC = 24VDC Note: All latching model RT part numbers are Schrack brand, are orange in color and have UL Class F (155C) coil construction. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Wiring Diagrams (Bottom View) Outline Dimensions .50 (12.7) .62 (15.7) 1 Pole 16A 6X .031 X .020 (.80 X .52) 12 22 14 24 11 21 11 21 14 24 12 22 1.14 (29) * .17 (4.3) 2X .020 X .020 (.52 X .52) *2 Coil version only 2 Pole 8A A1 A3*A2 22 A3*A2 * 2 Coil Version Only Code 5 Code 3 1 Coil Coil Terminals 2 Coils A1 A2 Operate + - Reset - + A1 - A3 A2 + - + Contact position not defined at delivery. PC Board Layout (Bottom View) 1 Pole 16A 2 Pole 8A 5mm Breaking Capacity 1 Pole .051 DIA. (1.30) 2 Pole 50 50 Contact Current .788 (20.0) 10 Contact Current A .394 (10.0) B 5 2 1 0.5 10 5 2 1 A B 0.5 * .051 DIA. (1.30) .296 (7.52) .148 * (3.76 * 2 Coil Version Only 0.1 10 50 100 DC Voltage A: 16A Version. B: 12A Version. Code 3 & 5 Dimensions are shown for reference purposes only. 20 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 200 300 0.1 10 20 50 100 DC Voltage 200 300 A: 1 Contact. B: 2 Contacts in series. www.tycoelectronics.com Technical support: 907 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KUL series 10 Amp Magnetic Latching Relay File E22575 File 15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features * Single or dual-wound DC coils or single-wound AC coils. * Contact arrangements to 3PDT. * Reset occurs by reversing polarity in a single coil relay or by energizing the reset winding in dual coil relays. * Uses same sockets as other KU relays. * Well suited for applications such as alarm systems, machine tools, battery chargers and process controls. Nominal Voltage DC Resistance in Ohms 10% 12 24 48 120 472 1,800 12 24 48 90 350 1400 Must Operate Voltage 0.5 W Resistor Single Coil DC Coils 9.0 18.0 36.0 ___ ___ ___ Dual Coil* Contact Data @ 25C 9.0 18.0 36.0 ___ ___ ___ Single Coil with Diodes** Arrangements: DC Single Coil: 1 Form C (SPDT), 2 Form C (DPDT) and 3 Form C (3PDT). DC Dual Coil: 1 Form C (SPDT) and 2 Form C (DPDT). AC Single Coil: 1 Form C (SPDT), 2 Form C (DPDT) and 3 Form C (3PDT). Materials: Siver-cadmium oxide. Expected Life: Mechanical: 10 million operations. Electrical: 100,000 operations minimum at rated load. Contact Ratings Contact Code Arrangement Ratings 5 1,2,3 poles 10A @ 28VDC or 240VAC, 80% PF; 1/4 HP @ 120VAC, 1/3 HP @ 240VAC AC Coils 50/60 Hz. 24 120 240 176 3,700 17,900 20.4 102.0 204.0 680 15,000 68,000 Dual Coil 24 120 Latch Reset 100 2525 250 7800 20.4 102.0 ___ ___ * Dual coil available only with 1 or 2 Form C contacts. On standard dual coil relays, the latch and unlatch voltage must be the same. For unlike voltages, please contact your sales representative. ** Diodes and resistors included inside relay with 1 and 2 Form C contacts. For 3 Form C relays, the customer must furnish and wire diodes and resistors externally. 15% for AC coils. Operate Data @ 25C Must Operate Voltage: DC Coils: 75% of nominal voltage. AC Coils: 85% of nominal voltage. Operate Time : 25 milliseconds maximum at nominal voltage. Release or Reset Time: 25 milliseconds maximum at nominal voltage. Initial Dielectric Strength Between Open Contacts: 500V rms. Between Adjacent Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms. Environmenal Data Coil Data @ 25C Duty Cycle: Continuous. (Latch and reset not to be energized simultaneously). Initial Insulation Resistance: 100 megohms, minimum. Initial Breakdown Voltage: 1500V rms, 60 Hz. between all elements. Temperature Range: Storage: -45C to +105C. Operating: Single Coil AC & DC: -45C to +70C. Dual Coil DC: -45C to +50C. Mechanical Data Note: On single coil AC models one terminal is common. Latch/Reset function is accomplished by input in series with a diode to provide the correct polarity to the coil. To perform either function, the terminal not being used (Latch or Reset) must be open or isolated with no other path to common or ground. Dimensions are shown for 908 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Termination:.187" (4.75mm) quick connect/solder terminals. Sockets are available. Enclosure: Clear plastic polycarbonate heat and shock resistant case. Weight: 3.4 oz. (96g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 Ordering Information P&B Typical Part No. B KUL -11 D 1 1 D -12 1. Basic Series: KUL magnetic latching relay 2. Contact Arrangement: 5 = 1 Form C (SPDT) 11 = 2 Form C (DPDT) 3. Coil Input: A = AC D = DC 4. Mounting: 1 = Plain case 5 = Bracket mount case 14 = 3 Form C (3PDT) 5. Terminal & Contact Materials: 5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide, 10 amps. 6. Number of Coils: S = Single coil D = Dual coil (1 & 2 pole models only) 7. Coil Voltages: Single coil--24-240VAC 12-48VDC Dual coil--12-48VDC, 24 or 120VAC (to 2 Form C) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. KUL-11A15S-120 KUL-11D15D-12 KUL-11D15D-24 KUL-11D15S-12 Outline Dimensions KUL-11D15S-24 Wiring Diagrams (Bottom Views) Single Coil Type S 7 2 5 8 3 6 1.406 MAX. (35.71) 9 A AC Coil 1 Form C 1 Form C A + B LATCH RESET 9 A B COMMON RESET 7 + LATCH A - Note 2 3 6 1 4 7 9 7 A B A + + - 8 9 RESET B + LATCH 2 Form C 1 4 LATCH RESET 2 5 7 + - 2 Form C 2.125 MAX. (53.96) 2.156 MAX. (54.76) 1 Form C 2 5 7 1.378 MAX. (35.0) AC or DC Dual Coil 2 5 B 1.531 MAX. (38.89) 2.156 MAX. (54.76) Dual Coil Type D DC Single Coil 2 Form C RESET 1 4 8 3 6 1 4 9 7 B A LATCH - COMMON 5 RESET KUL-5A15S-120 KUL-11A15S-24 8 + 3 6 9 B + LATCH Note 2 Polarity for DC only. See KU series drawings for bracket mount case. 3 Form C Terminal Dimensions .187" (4.75mm) Standard .078 (1.98) 2 5 3 6 1 4 2 5 3 6 7 8 9 7 8 9 B A A .125 (3.18) 3 Form C 1 4 + LATCH RESET + - B LATCH Note 3 RESET .187 .0 02 (4.75 .05) Note 1 Contact positions shown in diagrams is with the "RESET" input having been energized last. .250 (6.35) HEADER .281 REF. (7.14) .020 THICKNESS (.51) Dimensions are shown for reference purposes only. Note 2 Do not connect any low impedance loads from terminal B to A. Note 3 Dimensions are in inches over (millimeters) unless otherwise specified. Resistor and diodes connected by customer. See Coil Data Chart on KUL Series engineering data page for resistor value. Recommended using 1N4007 diode. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 909 Catalog 1308242 Issued 3-03 P&B KBP series 10 Amp Dual Coil Latching Relay File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data * Dual coil latching relay accepts a momentary impulse to one coil to latch and a second impulse to the other coil to release. * Enclosed in a clear polycarbonate dust cover. * AC or DC coils. * Contacts up to 5PDT. * Mounts in 11 or 20-pin octal-type plugs. Nominal Voltage DC Coils (to 5 pole) 12 24 48 110 220 Nominal Voltage Resistance in Ohms 10% @ 25C Nominal Current Milliamperes 52.0 230 850 4560 230 104 56.5 24 Use 110 volt relay with 5000 Ohms, 5 watt resistor in series. Resistance in Ohms 15% @ 25C Nominal Current Milliamperes Up to 4 Pole Relays Contact Data @ +25C Arrangements: From 2 Form C (DPDT) to 5 Form C (5PDT), (3PDT each coil). Ratings: 10 amps @ 120VAC. Materials: 10 amp models: Silver-cadmium oxide. Expected Life: 500,000 operations, mechanical; 50,000 operations minimum at rated loads. AC Coils 24 120 240 24 120 42 1030 4100 For 5 Pole Relays 210 44 22 27 700 325 68 Operate Data @ +25C Must-Operate Voltage: DC: 75% of nominal voltage. AC: 85% of nominal voltage. Operate Time: 25 milliseconds excluding bounce. Initial Dielectric Strength Between Open Contacts: 500V rms. Between Adjacent Contacts: 1,000V rms. Between Contacts and Coil: 1,000V rms. Environmental Data Temperature Range: Storage: 105C. Operating: -45C to +85C. Coil Data @ +25C Nominal Power: DC Coils: 2.7W. AC Coils: 5.3VA to 4 pole; 7.8VA to 5 pole. Maximum Power: DC coils - 4.0W. Duty Cycle: Intermittent. Initial Insulation Resistance: 100 megohms. Dimensions are shown for 910 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: See terminals table on next page. Enclosures: Plastic dust cover standard. Hermetically sealed metal case available on special order. Weight: 10.8 oz. (306g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information B Typical Part Number 1. Type: KBP = Enclosed, dual coil latching relay. KBP -11 A G -24 KB = Open, dual coil latching relay. 2. Contact Arrangement: 11 = 2 Form C (DPDT) 17 = 4 Form C (4PDT) 20 = 5 Form C (5PDT) 3. Coil Input: A = AC D = DC 4. Contact Rating: G = 10 amps @ 120VAC, 80% PF. 5. Coil Voltage: 12, 24, 48, 110VDC 24, 120, 240VAC Specify the same latch and release coil voltage for standard KBP relays. Unlike coils available on special order. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. KB-17AG-120 KB-17DG-12 KBP-11DG-110 KBP-20AG-120 KBP-11AG-120 KBP-11DG-24 Outline Dimensions 27E928 Socket Dust Cover KB-Open Style 2.205 MAX. (36.01) 1.781 MAX. TYP. (45.24) 2 HOLES .157 DIA. REF. (3.99) 1.187 REF. TYP. (30.15) 3.56 MAX. (90.4) .005 (0.127) .010 (0.254) 1.496 REF. (38.00) 1.265 (32.13) .875 REF. TYP. (22.23) .44 .03 (11.2 .8) .56 .03 (14.2 .8) 1.812 .015 (46.02 0.38) 1.375 (34.92) .91 REF. (23.1) .165 (4.19) 2.406 MAX. (61.11) 1.25 .03 (31.8 .8) .250 (6.35) .500 (12.7) .031 REF. (0.79) .156" DIA. (4) MTG. HOLES (2 HOLES EACH FOR END OR BOTTOM MOUNTING.) .25 (6.35) 3.22 (81.79) 1.609 (40.87) Wiring Diagrams (Bottom Views) 9 11 4 5 6 7 7 8 9 10 3 2 3 8 5 6 4 1 1 11 16 18 2 7 15 17 20 19 Latch Reset KBP11 9 11 13 10 1214 3 8 5 6 4 1 13 10 1214 2 16 18 15 17 20 19 Reset Latch KBP17 Reset Latch KBP20 Note: Shown with reset coil energized last. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 911 Catalog 1308242 Issued 3-03 P&B S89R/S90R series Bistable, Impulse Relay 15 and 20 Amp Industrial Rating Continuous Coil Rating File E22575 File LR15734 S89R Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. S90R Insulation: Class B (130C). Initial Breakdown Voltage: 1,500V rms, 60 Hz. Must-Operate Voltage: DC Coils: 75% of nominal voltage @ +25C. AC Coils: 85% of nominal voltage @ +25C. Features * Low cost, bistable impulse relay. * Operates on 75ms min. pulse. * Used in garage door controls, motor reversing and lighting controls. * S89R available with plastic cover and octal plug-in base. Coil Data Contact Data @ 25C Nominal Voltage Ratings: S89R: 15 amps, 1/2 HP, 125/250VAC; 5 amps, 125VAC, tungsten filament lamp load; 1/2 amp, 125VDC; 1/4 amp, 250VDC. Expected Life: 100,000 operations, mechanical; 50,000 operations at rated loads. Ratings: S90R: Load Minimum Life 20A, 120VAC or 7.5A, 277VAC, Tungsten. 15A, 125VAC or 7A, 277VAC, Fluorescent. 20A, 277VAC, 75-80% PF. 1 HP, 125VAC, 50/60 Hz. 2 HP, 250VAC, 50/60 Hz. 12 FLA, 60 LRA, 120VAC. 8 FLA, 48 LRA, 240VAC. Pilot Duty, 360VA, 125/250VAC. 10,000 Cycles 10,000 Cycles 50,000 Cycles 50,000 Cycles 50,000 Cycles 50,000 Cycles 50,000 Cycles 50,000 Cycles Resistance DC Ohms 15% @ +25C Nominal Current mA 8.7 260 1084 375 75 38 24VAC 120VAC 240VAC 6VDC 12VDC 24VDC 5.8 22.5 92 1035 533 260 Environmental Data Temperature Range: -10C to +60C. Coil Data @ 25C Nominal Power: DC Coils: 6.33 Watts @ +25C. AC Coils: 9VA @ +25C. Mechanical Data Weight: 7.75 oz. (241g) approximately. Ordering Information Typical Part No. B S89R 5 A B D 1 -24 1. Basic Series: S89R = 15A S90R = 20A 2.Contact Arrangement: 5 = SPDT 11 = DPDT 17 = 4PDT 3.Coil Input: A = AC D = DC 4.Coil Terminal Style: A = .187" (4.75mm) Quick connect/solder. B = .250" (6.35mm) Quick connect/solder. 5.Switch Terminal Style: C = .187" (4.75mm) Quick connect.* D = .250" (6.35mm) Quick connect. P = Dust cover with octal plug-in base. (S89R only.) P = Dust cover with octal plug-in base.* * S89R only. 6.Switch Terminal Configuration: 1 = Style 1 (See outline drawings.) 7. Coil Voltage: 24, 120, 240VAC 6, 12, 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. S89R5ABD1-24 S89R5ABD1-120 S89R5DBD1-12 Dimensions are shown for 912 reference purposes only. S89R11AAC1-24 S89R11AAC1-120 S89R11ABD1-24 S89R11ABD1-120 S89R11APP1-120 S89R11DAC1-12 Dimensions are in inches over (millimeters) unless otherwise specified. S89R11DAC1-24 S89R11DBD1-12 S89R11DBD1-24 S90R5ABD1-120 S90R11ABD1-24 S90R11ABD1-120 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Open Relays Enclosed Relays S89 Series 2.42 MAX. (61.5) 1.86 MAX. (47.2) 3.050 MAX. (77.47) 1.844 .015 (46.84 .381) .203 (5.16) 1.00 (24.5) MOUNTING PLATE 2.00 MAX. (50.8) Wiring Diagram 3.588 MAX. (91.14) 2.70 MAX. (68.6) INSULATORS USED ON S90R SERIES .56 (14.2) INPUT 1.781 MAX. (45.24) .078 (1.98) .562 (14.3) 2.406 MAX. (61.11) TAPPED #8-32 THREAD TYP. (2) PLACES 2.42 MAX. (61.5) 1.98 MAX. (50.3) 1.000 (25.40) 1.326 .0 06 (33.68 .152) Switch Terminal Configuration Switch Terminal Style Style 1 C = .187" (4.75mm) Quick-connect D = .250" (6.35mm) Quick-connect COM. .187" (4.75mm) Quick Connect .250" (6.35mm) Quick Connect S89R S89R S90R .055 D. (1.40) .250 (6.35) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. C D .188 (4.78) .066 D. (1.68) .250 (6.35) .312 (7.92) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 913 Catalog 1308242 Issued 3-03 P&B MDR series 10 Amp Rotary Relay For Demanding Shock & Vibration Applications Small 4PDT Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Medium 24PDT Features Operate Data @ 25C * AC and DC coils, latching and non-latching. * 4PDT through 24PDT contact arrangements. * Contacts will not chatter when relays are subjected to high-impact shock blows of 2000 ft.-lbs. Type Small AC Non-Latching Small DC Non-Latching Small AC Latching Small DC Latching Medium AC Non-Latching Medium DC Non-Latching Medium AC Latching Medium DC Latching Contact Data Arrangements: 4 Form C (4PDT) through 24 Form C (24PDT). Contact Ratings Single Contacts Two Contacts in Series 10A, 115VAC 3A, 28VDC 0.8A, 125VDC 3A, 440VAC 15A, 115VAC 1.5A, 125VDC The above AC contact ratings are based on contact loads having a 50% power factor. The DC contact ratings are based on resistive loads. Typ. Operate Time (ms) Typ. Release Time (ms) 5 to 12 5 to 18 15 to 30 5 to 15 6 to 12 N/A 10 to 16 N/A 6 to 12 6 to 20 65 to 90 10 to 30 8 to 14 N/A 30 to 80 N/A Latching Two-Position Types: Except for the latching feature, MDR latching relays utilize the same general construction as non-latching types. They have two sets of coils and provide a latching two-position operation. M L K 1 Contacts Shown With Coil 1-2 De-Energized and Coil 3-4 Energized. J A B Coil H G C Contact Section 3 Coil D E F 2 4 Coils Must be Energized Alternately, Not Simultaneously Environmental Data Temperature Range: Standard models: 0C to +65C. Special order models: 0C to +90C. FIXED CONTACT Mechanical Data Termination: #5-40 screw terminals supplied. Weight (Approx.): Small - 4 & 8PDT: 32 oz. (0.914 kg); 12PDT: 33 oz. (0.943 kg). Medium - 16PDT: 72 oz. (2.04 kg); 24PDT: 74 oz. (2.10 kg). Ordering Information and Coil Characteristics - No models in this series are maintained in stock. Type Small Non Latching Medium Non Latching Small Latching Medium Latching Part Number Contacts MDR-131-1 MDR-131-2 MDR-135-1 MDR-137-8 MDR-134-1 MDR-134-2 MDR-136-1 MDR-138-8 MDR-163-1 MDR-163-2 MDR-170-1 MDR-170-2 MDR-172-1 MDR-173-1 MDR-141-1 MDR-141-2 MDR-167-1 MDR-67-2 MDR-4091 MDR-67-3 MDR-5060 MDR-4076 MDR-4092 MDR-5035 MDR-5061 MDR-6064 MDR-7020 MDR-66-4 MDR-7036 4PDT 4PDT 4PDT 4PDT 8PDT 8PDT 8PDT 8PDT 12PDT 12PDT 16PDT 16PDT 16PDT 16PDT 24PDT 24PDT 24PDT 4PDT 4PDT 4PDT 4PDT 8PDT 8PDT 8PDT 8PDT 12PDT 12PDT 16PDT 16PDT Coil Voltage (60 Hz. for AC) 115VAC 440VAC 28VDC 125VDC 115VAC 440VAC 28VDC 125VDC 115VAC 440VAC 115VAC 440VAC 28VDC 125VDC 115VAC 440VAC 28VDC 115VAC 440VAC 28VDC 125VDC 115VAC 440VAC 28VDC 125VDC 115VAC 28VDC 115VAC 125VDC Coil Current (Amps) 0.215 0.045 0.362 0.082 0.215 0.045 0.362 0.082 0.230 0.055 0.620 0.160 0.667 0.125 0.620 0.160 0.667 0.150 0.020 0.778 0.164 0.150 0.020 0.778 0.164 0.380 0.316 0.380 0.083 DC Coil Resistance (Ohms) 66 1,256 76 1,520 66 1,256 76 1,520 62 940 8.4 107 42 1,024 8.4 107 42 210 4,500 36 760 210 4,500 36 760 24 88.6 24 1,500 Coil Power* (Watts) 6.5 5.1 10.0 10.3 6.5 5.1 10.0 10.3 6.9 6.3 17.0 17.0 18.7 16.0 17.0 17.0 18.7 5.5 3.0 21.8 20.6 5.5 3.0 21.8 20.6 12.0 8.8 12.0 10.4 Breakdown (Volts RMS) 1,230 1,880 1,308 2,375 1,230 1,880 1,308 2,375 1,230 1,880 1,230 1,880 1,308 2,375 1,230 1,880 1,308 1,230 1,880 1,308 2,375 1,230 1,880 1,308 2,375 1,230 1,308 1,230 2,375 * Actual Wattmeter readings Dimensions are shown for 914 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Tolerances: Decimals .010 ( .25) Unless Otherwise Specified Small Models .196 .005 DIA. (4.98 .13) 4 HOLES Overall Height 4PDT 3.13" (79.5mm) Max. 8PDT 3.53" (89.7mm) Max. 12PDT 3.88" (98.6mm) Max. 3 2 J H G 1 F K L E Coil and Contact Terminal Screws #5-40 Supplied M D 2.125 (53.98) 2.625 (66.68) A 1 C B 2 COIL 2.125 (53.98) 2.625 (66.68) Medium Models .281 .005 DIA. (7.14 .13) 4 HOLES 6 5 Overall Height 12PDT 4.63" (117.6mm) Max. 16PDT 5.00" (127.0mm) Max. 24PDT 5.75" (146.1mm) Max. 4 3 G H E F D J L C K M A 2 1 3.250 (82.55) Coil and Contact Terminal Screws #5-40 Supplied 4.190 (106.43) B 1 3.250 (82.55) 4.190 (106.43) Dimensions are shown for reference purposes only. 2 COIL Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 915 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 136 series DPDT, 20 Amp Traffic Control (flash transfer) Relay CALTRANS approved NEMA approved Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25C * The Type 136 is a small power relay that will switch a 20 amp tungsten load at 120VAC. * Mechanical life in excess of 5 million operations is obtained by the use of a wide friction-free knife-edge frame design and armature assembly. * The dust cover enclosure is fitted with an 8-position Jones plug. * All ratings are at 25C ambient. Nominal Voltage: 120VAC. Resistance (10%): 390 ohms. Nominal Power: 10VA. Duty Cycle: Continuous. Temperature Rise: 45C. Operate Data @ 25C Contact Data @ 25C Must Operate Voltage: 85% of nominal voltage. Materials: Silver-palladium, .375 (9.52) diameter. Rating: 20 amps, tungsten @ 120VAC. Expected Life: 5 million operations, mechanical; 250,000 operations at rated load. Mechanical Data Mounting: Socket mount. Termination: 8-position Jones Plug compatible with CINCH 2400 series socket. Enclosure: Clear polycarbonate dust cover. Weight: 11 oz. (312g) approximately. Initial Dielectric Strength Between All Points: 1,500VAC. Ordering Information Part Number 136-62T3A1 Description Traffic Control (Flash Transfer Function) Relay (120VAC coil; contacts rated 20A tungsten @ 120VAC) Our authorized distributors are likely to maintain the above-listed part number in stock for immediate delivery. Wiring Diagram Outline Dimensions .460 (11.68) 1.00 (25.4) .500 (12.7) .550 (13.97) 2.80 (71.12) 2.375 (60.32) .420 (10.66) .250 (6.35) .062 (1.57) Terminal Detail 1.75 (44.45) Dimensions are shown for 916 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT GP/ML/TR series 10 Amp Control Relay Non-latching, Latching & Timing Versions File E15631 SERIES GP SERIES TR File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. GP/ML/TR Design Features Features Among the advances AGASTAT control relays offer over existing designs is a unique contact operating mechanism. An articulated arm assembly amplifies the movement of the solenoid core, allowing the use of a short stroke coil to produce an extremely wide contact gap. The long support arms used in conventional relays are eliminated. Both current capacity and shock/vibration tolerance are greatly increased, as well as life expectancy. * Occupies very small panel space * May be mounted singly, in continuous rows or in groups. * Available with screw terminal molded socket. * 4 SPDT contacts. * Magnetic blowout device option increases DC current carrying ability approximately ten times for both N.O. and N.C. contacts. In both AC and DC operation, the addition of the device will normally double the contact life, due to reduced arcing. Design/Construction AGASTAT control relays are operated by a moving core electromagnet whose main gap is at the center of the coil. A shoe is fitted to the core which overlaps the yoke and further increases the magnetic attraction. The coil itself is in the form of an elongated cylinder, which provides a low mean turn length and also assists heat dissipation. Since the maximum travel of the electromagnet does not provide optimum contacts movement, an ingenious amplifying device has been designed. This consists of a W-shaped mechanism, shown in figure 1. When the center of the W is moved vertically the lower extremities move closer to each other as can be seen in the illustration. The center of the W mechanism is connected to the moving core of the electromagnet and the two lower points are connected to the moving contacts. Two of these mechanisms are placed side-by-side to actuate the four contacts sets of the relay. The outer arms of the W mechanisms are leaf springs, manufactured from a flat piece of non-ferrous metal. These outer arms act as return springs for their corresponding contacts. This provides each contact with its own separate return spring, making the contacts independent. The mechanical amplification of the motion of the electromagnet permits a greater distance between the contacts, while the high efficiency of the electromagnet provides a nominal contact force in excess of 100 grams on the normally open contacts. All the contacts are positioned well away from the cover and are well ventilated and separated from each other by insulating walls. The absence of metal-to-metal friction, the symmetrical design of the contact arrangement and the lack of heavy impacts provides a mechanical life of 100,000,000 operations. For use in AC circuits, the relay is supplied with a built-in rectification circuit, thus retaining the high DC efficiency of the electromagnet. The current peak on energizing is also eliminated and consequently the relay can operate with a resistance in series (e.g. for high voltages or for dropout by shorting the coil). The use of the rectification circuit offers still other advantages. The same model can operated at frequencies ranging from 40 to 400 cycles. Operation of the relay is crisp; even with a low AC voltage, there is a complete absence of hum and vibration. The plastic dust cover has two windows through which the iron yoke protrudes to facilitate cooling and also to allow direct mounting arrangement of the relay irrespective of the terminals. GP/ML Contact Data @ 25C Arrangements: 4 Form C (4PDT) Material: Siver plated. Ratings: See chart. Expected Life: Mechanical: 100 million operations. Electrical: See chart and graph. Contact Ratings and Expected Life Voltage 540 VAC 380 VAC 380 VAC 380 VAC 220 VAC 220 VAC 220 VAC 220 VAC 220 VAC 220 VAC 220 VAC 220 VAC 220 VAC 120 VDC 48 VDC Current (Amps) 3 15 10 3 x 3.3 20 15 10 3x6 5 5 2.5 2 1.25 1.5 10 Power Factor or Time Constant COS O = 0.5 Resistive Resistive COS O = 0.8 Resistive COS O = 0.5 Resistive COS O = 0.8 Resistive COS O = 0.25 Resistive Resistive Resistive Resistive Number of Electrical Operations 15,000 10,000 200,000 200,000 20,000 20,000 400,000 200,000 1,500,000 3,000,000 2,000,000 15,000,000 30,000,000 20,000,000 1,000,000 Remarks 2 contacts in series 2 contacts in parallel 3hp motor 2 contacts in parallel 2 contacts in parallel 3hp motor Filament lamps with blow-out device Load Life Curve Figure 1 - Illustration of Amplification This diagram illustrates amplification obtained by the articulated operating mechanism. NOTE: Seismic & radiation tested EGP, EML and ETR models are available. Consult factory for detailed information. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 917 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Initial Dielectric Strength Operate Data @ 20C Between non-connected terminals: 2,000V rms, 60 Hz. Between non-connected terminals & relay yoke: 2,000V rms, 60 Hz. Operate Time at Rated Voltage: Between energizing and opening of normally closed contacts, less than 18 milliseconds on AC and less than 15 milliseconds on DC. Release Time: Between energizing and closing of normally open contacts, less than 35 milliseconds on AC and less than 30 milliseconds on DC. Between de-energizing and opening of normally open contacts, less than 70 milliseconds on AC and less than 8 milliseconds on DC. Between de-energizing and closing of normally closed contacts, less than 85 milliseconds on AC and less than 25 milliseconds on DC. Initial Insulation Resistance Between non-connected terminals: 109 ohms at 500VDC. Between non-connected terminals & relay yoke: 109 ohms at 500VDC. Coil Data Voltage: 24, 120 & 220VAC, 60 Hz. Add series resistor for 380-440VDC; 12, 24, 48, 125 & 250VDC. Environmenal Data Duty Cycle: Continuous. Nominal Coil Power: 6VA for AC coils; 6W for DC coils. There is no surge current during operation. Coil Operating Voltage DC AC, 50/60Hz Nominal Coil Voltage 12 24 48 125 250 24 120 220 Minimum Pick-up Voltage at 20C 9 18 36 94 187 19 92 175 Minimum Pick-up Voltage at 40C 9.5 19 38 100 200 20 102 188 Maximum voltage for continuous use 13.5 27 53 143 275 27 137 245 For 380VAC - Use 6800 ohms 4 watt resistor in series with 220VAC relay. For 440VAC - Use 8200 ohms 6 watt resistor in series with 220VAC relay. Drop-out voltage is between 10% and 40% of the nomninal voltages for both DC and AC (For example: in a 120 VAC unit, drop-out will occur between 12 and 48 volts.) DC relays will function with unfiltered DC from a full-wave bridge rectifier. Operating Temperature Range: 0C to +60C. Vibration: Single axis fragility curve data are available on request at frequencies from 5 Hz. to 33 Hz. Shock: The relay, when kept energized by means of one of its own contact sets, will withstand 40g shock load when operating on DC, and 150g shock load on AC. Mechanical Data Mounting Terminals: 16 flat base pins. Screw terminal sockets are available. Wire Connection: The 16 flat pins are arranged in four symmetrical rows of four pins; the pitch in both directions being .394". Connection may be made to the relay by soldering. Sockets are available with screw terminals. The internal wiring of the relay is also symmetrical as shown in the adjacent figure, allowing the relay to be inserted into the socket in either of two positions. Terminals B2 and B3 are provided as extra connections for special applications. Weight: 10.9 oz. (308g) approximately. Ordering Information Typical Part No. 1. Basic Series: GP = Non-latching Control Relay 2. Coil Voltage: A = 12VDC B = 24VDC C = 48VDC D = 125VDC F = 250VDC GP I N ML = Magnetic Latching Control Relay G = 24VAC, 60 Hz. I = 120VAC, 60 Hz. J = 220VAC, 60 Hz. 3. Options: N = Magnetic Blow-out Device Q = Light to indicate coil energization (GP only. 120VAC, 125VDC, 220VAC and 250VDC voltages only.) R = Internal diode to suppress coil de-energization transient. (GP only. When used on DC unit, relay release time increases to same value as AC unit). Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. GPD GPDN Outline Dimensions Dimensions are shown for 918 reference purposes only. Wiring Diagrams (Bottom Views) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT TR series 10 Amp Control Relay - Timing Version TR Features Load Life Curve * 8 timing ranges. * 4 SPDT contacts. * Magnetic blowout device option increases DC current carrying ability approximately ten times for both N.O. and N.C. contacts. In both AC and DC operation, the addition of the device will normally double the contact life, due to reduced arcing. TR Design/Construction Couples an advanced electromechanical design with a field-proven solidstate timing network, an adaptation of the circuit used in the AGASTAT premium grade SSC Timer. This unique circuit also eliminates the need for supplementary temperature-compensation components, affording unusual stability over a realistically broad operating temperature range. It also provides transient protection and protection against premature switching of the output contacts due to power interruption during timing. Timing Specifications Operating Mode: On-Delay (Delay on energization). Timing Adjustment: Internal fized or internal potentiometer. Timing Ranges: .15 to 3 sec. 4 to 120 sec. .55 to 15 sec. 10 to 300 sec. 1 to 30 sec. 1 to 30 min. 2 to 60 sec. 2 to 60 min. Accuracy: Repeat: 2% as fixed temerature and voltage. Overall: 5% over combined rated extremes of temerature and voltage. Reset Time: 75ms. Initial Insulation Resistance Between non-connected terminals: 109 ohms at 500VDC. Between non-connected terminals & relay yoke: 109 ohms at 500VDC. Coil Data Voltage: 120VAC, 50-60 Hz.; 24 & 125VDC. Contact Data @ 25C Transient Protection Arrangements: 4 Form C (4PDT) Nominal Rating: 10A @ 120VAC. Contact Pressure: Between movable and normally closed contacts: 30 g, typical. Between movable and normally open contacts: 100 g, typical. Expected Life: Mechanical: 100 million operations. Electrical: See load/life graph. 1,500 volt transient of less than 100 microseconds, or 1,000 volts or less. Environmenal Data Operating Temperature Range: 0C to +50C. Mechanical Data Initial Dielectric Strength Mounting Terminals: 16 flat base pins. Screw terminal sockets are available. Weight: 11 oz. (311g) approximately. Between terminals and case and between mutually-isolated contacts: 2,000VAC. Wiring Diagram (Bottom View) Ordering Information Typical Part No. TR 1 4 B 1 A N 1. Basic Series: TR = Timing control relay 2. Operation: 1 = On-delay 3. Output: 4 = 4PDT (4 form C) 4. Operating Voltage: B = 24VDC D = 215VDC I = 120VAC, 50/60 Hz. 5. Timing Adjustment: 1 = Internal fixed. 3 = Internal potentiometer. 6. Timing Range: A = .15 to 3 sec. C = 1 to 30 sec. E = 4 to 120 sec. I = 2 to 60 min. B = .55 to 15 sec. D = 2 to 60 sec. G = 10 to 300 sec. N = 1 to 30 min. 7. Options: N = Magnetic blow-out device. Outline Dimensions Same as GP/MR. See previous page. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. None at present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 919 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Accessories for GP/ML/TR series control relays Front connected sockets Cat. No. CR0001 With captive clamp terminals Cat. No. CR0002 With (#6) binding head screws Cat. No. CR0095 With (#6) screw terminals Cat. No. CR0067 With (#6) screw terminals Hold down (locking) springs Cat. No. CR0069 For socket: CR0067 Cat. No. CR0070 For socket: CR0095 Cat. No. CR0111 For sockets: CR0001& CR0002 Heavy-duty hold down (locking) straps *Cat. No. CR0133 For socket: CR0001 & CR0002 *Cat. No. CR0155 For socket: CR0095 * Catalog number includes strap, strap plate and necessary brackets. Magnetic blowout device Extracting handle Cat. No. CR0190 Reduces arcing on the relay contacts when they make or break contact, either upon energizing or de-energizing, resulting in less contact degradation. Extends the life of the contact. Dimensions are shown for 920 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Cat. No. CR0179 Used to remove GP, ML and TR units from mounting bases. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AUTOMOTIVE RELAYS Alphanumeric Index Series Type Page T72M ................................... Single 20A Relay .......................................... 1005 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays . 301-336 3 Mid-Range PC Board Relays ....... 19-21 4 V23086 ............................. Single or Dual 20A Relay .......................... 1002 V2R ....................................... 20A Motor Reversing Module ................ 1012 VF4 ....................................... 40A Relay ........................................................ 1017 VF7 ....................................... 70A Relay ........................................................ 1021 VFM ...................................... 20A Relay ........................................................ 1014 VKP ....................................... 40A Relay ........................................................ 1007 VTF ........................................ Flasher Module .............................................. 1024 Automotive Relay Question Tree This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual partPower number toPC be specified. course, the user must assume BoardOfRelays ................ 22-35 ultimate responsibility for determining the suitability of a relay for a particular application. Contact Switch Rating? Relays with Forcibly-Guided Contacts.............. 36-79 20 amps* 40 amps* P.C. Board Plug-in / Flange P.C. Board T72M V23086 V2R VFM VKP VF4 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 7 P.C. Board Plug-in / Flange Power Relays & Definite Purpose Contactors...................... 89-131 VF4 VF7 VF7 8 Latching, Impulse & Rotary Relays ............................... 149-154 9 Automotive Relays ..................1001-1026 10 Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Plug-in / Flange * Typical loads at 14VDC, resistive, for comparison purposes. See catalog pages for a given series for detailed rating specifications. NOTE: The "automotive" relays described in this section are DC coil relays designed to switch 14VDC loads in automobiles. They may also be suitable for non-automotive applications such as electric wheelchairs and other battery powered equipment. They are not UL recognized. 6 70 amps* Plug-in/Panel Mount Mounting Type? Mounting Type? General Purpose Relays............ 701-749 Mounting Type? 5 Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1001 Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS V23086 series 20 Amp Micro K (Single & Dual) PC Board Relay for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * * * * * * * Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 3 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.) 30A, 16VDC switching rating. 40A inrush at 16VDC. 20A continuous contact rating @ 85C. Immersion cleanable plastic case with knock-off nib for ventilation. 60% less volume than other comparable power relays. 1 Form A and 1 Form C arrangements in single and dual relay packages. Choice of AgNi 0.15 or AgSnO contacts. Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23C Ambient, 20-50% RH, 29.5 1.0" Hg.) unless otherwise noted. Contact Data 1 Form A (SPST-NO) and 1 Form C (SPDT) in single relay and dual relay configurations. Material: AgNi 0.15 - Recommended for inductive loads. AgSnO - Recommended for high inrush, lamp and capacitive loads and applications prone to contact material transfer. Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Load Current (@ 14VDC Load Voltage): Arrangements: Load Max. Continuous Current Max. Break Current Max. Make Current AgSnO AgNi 0.15 Environmental Data Temperature Range: Storage: -40C to +155C. Operating: -40C to +105C . Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Mechanical Data Form A (NO) NO Form C NC 30A 30A 30A 30A 25A 25A 100A 40A 100A 40A 15A 10A Termination: Printed circuit terminals. Enclosure: Immersion cleanable, sealed plastic cover. Weight: Sealed: 4 gm (0.14 oz.) approximately. Max. Switching Power: 35-320 watts DC (voltage dependent). Min. Recommended Current: 0.5 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 10 amp contact load. 250 millivolts, maximum, for normally closed contacts @ 5 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 20 amps, 14VDC, resistive load on normally open contact. Abnormal Operation Overload Current: 50A, 5 sec.(2) 87.5A, 0.5 sec. 150A, 0.1 sec. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23C. Drop Test: Capable of meeting specifications after a 1.0 meter drop onto concrete in final enclosure. Flammability: UL94-HB or better (meets FMVSS 302). Initial Dielectric Strength Between Contacts and Coil: 500V rms. Notes Coil Data (1) Allowable overdrive is rated at ambient temperature of 23C and 105C as stated with no load current flowing through the relay contacts and minimum coil resistance with power applied for 30 sec. max. (20% max. duty cycle.) (2) Current and times are compatible with circuit protection by a typical 25A fuse. Relay will make, carry and break the specified current. Voltage: 12 VDC. Resistance: See Coil Data table. Nom. Power: 0.55 watts @ 23C coil temp. and rated coil voltage. Thermal Resistance: 50C per actual coil watt in still air with no contact load current. Coil Data (@ 23C Coil Temperature) Coil Designator 001 Dimensions are shown for 1002 reference purposes only. Rated Coil Voltage (VDC) 12 Coil Resistance 10% (Ohms) 254 Dimensions are in inches over (millimeters) unless otherwise specified. Must-Operate Voltage (VDC) 6.9 Allowable (1) Overdrive (VDC) Must-Release Voltage (VDC) 1.5 Specifications and availability subject to change. @ 23C @ 105C 27.2 16.5 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Operating Voltage Range 35 Coil Voltage (VDC) 30 25 V max. Does not take into account the temperature rise due to the contact current. 20 V op = Operation Voltage 15 E = Pre-Generation V op (E = 13.5V) 10 V op (E = 0V) 5 V rel. 0 -40 0 -20 20 60 40 80 100 120 Ambient Temperature (C) Ordering Information Part Number Contact Arrangement Enclosure Contact Materials V23086-C1001-A303 V23086-C1001-A402 V23086-C1001-A403 V23086-C2001-A303 V23086-C2001-A403 1 Form C 1 Form A 1 Form C Dual Form C Dual Form C Sealed, Plastic Cover Sealed, Plastic Cover Sealed, Plastic Cover Sealed, Plastic Cover Sealed, Plastic Cover AgNi 0.15 AgSnO AgSnO AgNi 0.15 AgSnO Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. V23086-C1001-A303 V23086-C1001-A403 Outline Dimensions - Single Relay Wiring Diagrams - Single Relay (Bottom Views) 1 Form A Knock-off-nib The Knock-off-nib may be removed after soldering and washing (for ventilation) 1 Form C 4 3 5 1 5 .037 .008 (0.95 0.2) .228 .004 (5.8 0.1) .472 .004 (12 0.1) .098 .008 (2.5 0.2) .508 .008 (12.9 0.2) Dimensions are shown for reference purposes only. Suggested PC Board Layout - Single Relay (Bottom View) .315 .004 (8 0.1) Assembly and positioning aid .301 .004 (7.65 0.1) .390 .004 (9.9 0.1) .110 . 008* Terminals tinned (2.8 0.2) 1 2 2 .024 .008 (0.6 0.2) 4 .087 (2.2) .276 .004 (7 0.1) .118 .002 (3 0.05) .016 .004 (0.4 0.1) o .067 .002 *excluding solder (1.7 0.05) Dimensions are in inches over (millimeters) unless otherwise specified. 3 5 4 1 2 o .071 .002 (1.8 0.05) .053 (1.35) .283 .008 (7.2 0.2) .024 .004 (0.6 0.1) .020 .008 (0.5 0.2) o .043 .002 (1.1 0.05) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1003 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions - Dual Relay Knock-off-nibs The knock-off-nibs may be removed after soldering and washing (for ventilation) .024 .008 (0.6 0.2) .925 .008 (23.5 0.2) .098 .008 (2.5 0.2) .037 .008 (0.95 0.2) .508 .008 (12.9 0.2) .301 .004 (7.65 0.1) .390 .004 (9.9 0.1) .016 .004 (0.4 0.1) *Excluding solder 6 x o .047 .002 (1.2 0.05) .315 .004 (8 0.1) .276 .004 (7 0.1) .087 (2.2) .024 .004 (0.6 0.1) .118 .002 (3 0.05) 1 2 1 5 4 4 3 .020 + .002 (0.5 + 0.05) 3 5 4x .020 .008 (0.5 0.2) .053 (1.35) 2 Terminals tinned .110 .008* (2.8 0.2) .118 .002 (3 0.05) .087 (2.2) .020 .008 (0.5 0.2) .276 .004 (7 0.1) .315 .004 (8 0.1) .283 .008 (7.2 0.2) .024 .004 (0.6 0.1) .756 .012 (19.2 0.3) Wiring Diagrams - Dual Relay (Bottom Views) 1 Form A Suggested PC Board Mtg. Holes - Dual Relay (Bottom View) 1 Form C See bottom view of relay (above) for hole-to-hole spacing 3 4 (1.7 0.05) 5 4 1 2 3 1 o .067 .002 (1.1 0.05) 1 4 2 o .043 .002 (1.8 0.05) 5 5 1 2 o .071 .002 1 2 5 5 1 4 3 2 5 3 2 4 o .067 .002 (1.7 0.05) 4 o .043 .002 (1.1 0.05) Dimensions are shown for 1004 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS T72M series 20 Amp Miniature PC Board Relay for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * * * * * * * Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 5 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.) 20A, 16VDC switching rating. 60A inrush at 16VDC. 15A continuous contact rating @ 105C. Immersion cleanable plastic case with knock-off nib for ventilation. Low profile package has a seated height of only .67`' (17mm). 1 Form C arrangement. Choice of AgNi 0.15 or AgSnO contacts. Conditions Environmental Data All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23C Ambient, 20-50% RH, 29.5 1.0" Hg.) unless otherwise noted. Temperature Range: Storage: -40C to +155C. Operating: -40C to +105C (4). Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Contact Data Arrangements: 1 Form C (SPDT). Material: AgNi 0.15 - Recommended for inductive loads. AgSnO - Recommended for high inrush, lamp and capacitive loads and applications prone to contact material transfer. Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Switching Voltage: 75VDC(1). Max. Load Current (@ 14VDC Load Voltage): Load Form C Max. Continuous Current Max. Break Current (1) Max. Make Current (2) AgNi 0.15 AgSnO NO NC 20A 20A 10A 20A 60A 80A 12A 15A Max. Switching Power: 35-320 watts DC (voltage dependent) (1). Min. Recommended Current: 0.5 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 10 amp contact load. 250 millivolts, maximum, for normally closed contacts @ 5 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 20 amps, 14VDC, resistive load on normally open contact. Mechanical Data Termination: Printed circuit terminals. Enclosure: Immersion cleanable, sealed plastic cover. Weight: Sealed: 12 gm (0.4 oz.) approximately. Audible Sound: 95dBA @ 10 cm, 14VDC coil voltage. 77dBA @ 1 M, 14VDC coil voltage. Abnormal Operation Overload Current: 40A, 36 sec.(5) 80A, 10 sec. 150A, 2.5 sec. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23C. Drop Test: Capable of meeting specifications after a 1.0 meter drop onto concrete in final enclosure. Flammability: UL94-HB or better (meets FMVSS 302). Initial Dielectric Strength Notes Between Contacts and Coil: 500V rms. (1) See Figure 1. (2) Inrush current for lamp load. (3) Allowable overdrive is rated at ambient temperature of 23C and 105C as stated with a 10A load current flowing through the relay contacts and minimum coil resistance with power applied for 30 sec. max. (20% max. duty cycle.) For continuous duty information, see Figure 2. (Ambient Termerature vs. Coil Voltage for Continuous Duty.) (4) See Figure 2. (5) Current and times are compatible with circuit protection by a typical 20A circuit breaker. Relay will make, carry and break the specified current. Coil Data Voltage: 12 and 24VDC. Resistance: See Coil Data table. Nom. Power: 0.80 watts @ 23C coil temp. and rated coil voltage. Thermal Resistance: 50C per actual coil watt in still air with no contact load current. Coil Data (@23C Coil Temperature) Coil Designator Rated Coil Voltage (VDC) Coil Resistance 10% (Ohms) Coil Inductance (H) (Ref.) Must-Operate Voltage (VDC) Must-Release Voltage (VDC) 12 24 12 24 180 720 0.9 3.2 6.3 12.6 1.2 2.4 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Allowable (3) Overdrive (VDC) @ 23C @ 105C 24.6 49.3 14.3 28.7 www.tycoelectronics.com Technical support: Refer to inside back cover. 1005 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load 75 40 W Switching Voltage (VDC) 60 20 25 0W 0W 10 0W Safe breaking, arc extinguished (normally open contact) for resistive loads. 32 0W 50 40 30 20 10 0.5 1 7 2 3 4 5 Switching Current (Amps) 10 12 20 Maximum Allowable Ambient Temperature (C) Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Duty Assumptions: 140 120 1. Thermal resistance = 50C per watt 2. Still air 3. Nominal coil resistance 4. Maximum mean coil temperature = 155C 5. Coil temperature rise due to load = 8C @ 10 amps = 20C @ 15 amps = 35.5C @ 20 amps 6. Curves are based on 800mW at 23C 7. When full lifetime is at high ambient and high load current, subtract 25C from maximum allowable ambient temperature. 100 80 60 40 20 0 80 90 100 110 120 130 140 150 160 170 180 190 0 Amp Contact Load 10 Amp Contact Load 15 Amp Contact Load 20 Amp Contact Load 200 Applied Coil Voltage (% of Rated Nominal) Ordering Information Part Number Contact Arrangement Enclosure Contact Materials T72M5D121-* T72M5D155-* 1 Form C 1 Form C Sealed, Plastic Cover Sealed, Plastic Cover AgNi 0. AgSnO *Standard Coil Voltages: 12 = 12VDC 24 = 24VDC (Consult factory for availability). Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) Tolerance (unless otherwise noted): 3 decimal: .010 (.254); 2 decimal: .015 (.381). Code 5 1 Form C .89 MAX. (22.5) .67 MAX. (17.0) .03 MAX. (.76) .65 MAX. (16.5) 4 PLACES .020 x .045 MAX. (.51 x 1.14) 5 4 .10 MIN. (2.5) SOLDER .140 .020 (3.5 .51) 1 3 2 Suggested PC Board Layout (Bottom View) .040 DIA. (1.02) .052 DIA. TYP. (1.3) .480 (12.2) .079 (2.0) .472 (12.0) .081 (2.06) .236 (6.0) Dimensions are shown for 1006 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VKP series Compact, 40 Amp, Open or Sealed PC Board Relay For Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * 40A continuous contact rating @ 85C. * 1 Form A and 1 Form C arrangements. * PC board terminals. * Available as open frame or sealed relay. * Choice of AgNi 0.15 or AgSnO contacts. Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time:5 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 3 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage). Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23C Ambient, 20-50% RH, 29.5 1.0" Hg.) unless otherwise noted. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: AgNi 0.15 - Recommended for inductive loads. AgSnO - Recommended for high inrush, lamp and capacitive loads and applications prone to contact material transfer. Max. Switching Rate:20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Switching Voltage: 75VDC (1). Max. Load Current (@ 14VDC Load Voltage): Load Max. Continuous Open Frame Current Sealed Cover Max. Break Current (1) Max. Make Current (2) AgNi 0.15 AgSnO Form A (NO) NO Form C NC 45A 45A 60A 45A 45A 60A 30A 30A 30A 100A 180A 100A 180A 30A 30A Max. Switching Power: 50-500 watts DC (voltage dependent) (1). Min. Recommended Current: 1 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 40 amp contact load. 250 millivolts, maximum, for normally closed contacts @ 20 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 40 amps, 14VDC, resistive load on normally open contact. Environmental Data Temperature Range: Storage: -40C to +155C. Operating: -40C to +125C (4). Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Mechanical Data Termination: Printed circuit terminals. Enclosure: Sealed relay is suitable for immersion cleaning of PCB assembly or conformal coating. Relay may be vented after cleaning by cutting the vent projection from the corner of the relay after processing using a razor knife or equivalent. Weight: 20g (0.7 oz.) approximately. Abnormal Operation Overload Current: Consult factory. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23C. Drop Test: Capable of meeting specifications after a 1.0 meter drop onto concrete in final enclosure. Flammability: UL94-HB or better, internal parts (meets FMVSS 302). Notes Initial Dielectric Strength Between Contacts and Coil: 500V rms. Coil Data Voltage: 12 and 24VDC. Resistance: See Coil Data table. Nom. Power: 1.6 watts @ 23C coil temp. and rated coil voltage. Thermal Resistance: 45C per actual coil watt in still air with no contact load current. (1) See Figure 1. (2) Inrush current for lamp load. (3) Allowable overdrive is rated at ambient temperature for 23C or 85C as stated with no load current flowing through the relay contacts and minimum coil resistance. Also see Figure 2 for maximum ambient temperature versus applied coil voltage. (4) See Figure 2. (5) Current and times are compatible with circuit protection by a typical automotive circuit breaker. Relay will make, carry and break the specified current. Coil Data (@ 23C Coil Temperature) Coil Designator Rated Coil Voltage (VDC) Coil Resistance 10% (Ohms) Coil Inductance (H) (Ref.) Must-Operate Voltage (VDC) Must-Release Voltage (VDC) F H 12 24 90 362 0.6 2.3 6.8 13.9 1.2 2.4 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Allowable (3) Overdrive (VDC) @ 23C @ 85C 19.6 39.3 14.3 28.6 www.tycoelectronics.com Technical support: Refer to inside back cover. 1007 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load Safe breaking, arc extinguished (normally open contact) for resistive loads. 40 30 50 0W Switchng Voltage (VDC) 75 60 50 20 50 20 W 0W 12 10 0.5 1 2 4 3 5 7 10 20 30 40 Switching Current (Amps) Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Duty 130 Assumptions: 1. 2. 3. 4. 5. Maximum Allowable Ambient Temperature (C) 120 110 100 90 0 Amp Contact Load 8 Amp Contact Load 80 16 Amp Contact Load 70 24 Amp Contact Load 6. 7. 8. 60 32 Amp Contact Load 50 9. 10. 40 40 Amp Contact Load Thermal resistance = 40C per watt. Still air. Nominal coil resistance. Maximum mean coil temperature = 180C. Coil temperature rise due to load. = 3.5C @ 8 amps. = 10C @ 16 amps. = 20C @ 24 amps. = 36C @ 32 amps. = 55C @ 40 amps. Thermal resistance and power dissipation based on coil resistance at 180C. Curves are based on 1.6 watts at 23C. When full lifetime is at high ambient and high load current, subtract 25C from maximum allowable ambient temperature. Data is for open relays. Subtract 10C from the maximum allowable ambient temperature for sealed version. 30 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Part Number VKP-11 * 42 VKP-15 * 42 VKP-11 * 52 VKP-15 * 52 VKP-31 *42 VKP-35 * 42 VKP-31 * 52 VKP-35 * 52 *Standard Coil Voltages: Contact Arrangement Contact Material Enclosure Termination Footprint 1 Form A 1 Form C 1 Form A 1 Form C 1 Form A 1 Form C 1 Form A 1 Form C AgNi 0.15 AgNi 0.15 AgSnO AgSnO AgNi 0.15 AgNi 0.15 AgSnO AgSnO Open Open Open Open Immersion Cleanable Case Immersion Cleanable Case Immersion Cleanable Case Immersion Cleanable Case U.S.A. U.S.A. U.S.A. U.S.A. U.S.A. U.S.A. U.S.A. U.S.A. F = 12VDC H = 24VDC (Consult factory for availability) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Note: See page 1011 for Wiring Diagrams, Suggested PC Board Layouts and Outline Dimensions. Dimensions are shown for 1008 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS New Relay for Flashing Lamp Applications VKP series Features Coil Data * 30A flashing lamp rating up to 85C. * Long life for flashing lamp load applications. * 1 Form A and 1 Form C arrangements. * Available as open frame or sealed relay. * Choice of standard or high current model. Voltage: 12 and 24VDC. Resistance: See Coil Data table. Nom. Power: 1.6 watts @ 23C coil temp. and rated coil voltage. Thermal Resistance: 45C per actual coil watt in stil air with no contact load current. PC Board Relay Operate Data Conditions All parametric, environmental and life tests are performed accourding to EIA Standard RS-407-A at standard test conditions (23C Ambient, 20-50% RH, 29.5 1.0" Hg.) unless otherwise noted. Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time:5 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 3 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage). Contact Data Environmental Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: PdCu/AgNi 0.15. Max. Switching Rate: 20 operations per second with no contact load. 90 operations per minute for rated life at rated load. 270 operations per minute for passenger car lamp outage indication. Max. Switching Voltage: 28VDC. Max. Load Current (@ 14VDC Load Voltage): Temperature Range: Storage: Open Types: -40C to +155C. Sealed Types: -40C to +125C. Operating: -40C to125C(4). Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Standard Current Types Load Form A (NO) NO NC Open Frame Sealed Cover 15A 12A 15A 12A 5A 5A Open Frame Sealed Cover Max. Make Current(3) Max. Break Current 120A 20A 4A 4A 120A 20A 4A 4A 30A 10A Steady-State Flashing(1) Alternate Flashing(2) Form C Mechancial Data Termination: Printed circuit terminals. (U.S.A. footprint style only) Enclosure: Sealed relay is suitable for immersion cleaning of PCB assembly or conformal coating. Relay may be vented cutting the vent projection from the corner of the relay after processing using razor knife or equivalent. Weight: 20g (0.7 oz.) approximately. High Current Types Load Steady-State Flashing Open Frame Sealed Cover Alternate Open Frame Flashing Sealed Cover Max. Make Current(3) Max. Break Current Abnormal Operation Form A (NO) NO Form C NC 30A 25A 30A 25A 10A 10A - 8A 8A 8A 8A 240A 30A 240A 30A 60A 20A Overload Current: Consult factory. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23C. Drop Test: Capable of meeting specifications after a 1.0 meter drop onto concrete in final enclosure. Flammability: UL94-HB or better (meets FMVSS 302). Notes (1) Continuous On-Off cycling of a single set of lamps at 60 to 90 cycles per minute and approximately a 50% duty cycle. (2) Continuous cycling between two sets of lamps with one set switched by the N.O. contacts and the other by the N.C. contacts, at 60 to 90 cycles per minute and aproximately a 50% duty cycle. (3) Inrush current for lamp load. (4) Allowable overdrive is rated at ambient temperature for 23C or 85C as stated with no load current flowing through the relay contacts and minimum coil resistance. Also see Figure 2 for maximum ambient temperature versus applied coil voltage. (5) Current and times are compatible with circuit protection by a typical automotive circuit breaker. Relay will make, carry and break the specified current. Min Recommended Current: 1 amp @ 12VDC. Initial Voltage Drop: 100 millivolts, maximum, for normally open contacts @ 10A contact load. 200 millivolts, maximum, for normally closed contacts @ 10A contact load. Expected Life: Mechanical Life: 10 million operations. Electrical Life: (See application information.) Electrical Isolation Dielectric Strength (coil to contacts): 500 Vrms. Coil Data (@ 23C Coil Temperature) Coil Designator Rated Coil Voltage (VDC) Coil Resistance 10% (Ohms) Coil Inductance (H) (Ref.) Must-Operate Voltage (VDC) Must-Release Voltage (VDC) F H 12 24 90 362 0.6 2.3 6.8 13.9 1.2 2.4 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Allowable (4) Overdrive (VDC) @ 23C @ 85C 19.6 39.3 14.3 28.6 www.tycoelectronics.com Technical support: Refer to inside back cover. 1009 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Application Information Electrical Life Test Information Load Polarity: VKP series relays for flashing lamp applications are constructed with Palladium-Copper movable contacts and fine grain silver stationary contacts. This causes the relay to be sensitive to the polarity of the load voltage. This type of VKP relay must be mechanized in the circuit such that the more positive connection is made to the movable contact (identified as terminal 4 in the wiring diagrams). Failure to do so will nullify the benefit of the Palladium Copper and will result in contact welding. Standard Current Relays: 3 bulb T/S (turn signal) system, combined turn signal and hazard warning with normal trailering (test requirements): 3 bulb 1.8 million operations 4 bulb 130 K operations 6 bulb 194 K operations 8 bulb 248 K operations TOTAL 2.3 million operations This application represent about the limit of the performance capability of the "standard current" types and is generally the limit of the industry requirement for passenger car applications. Typical Applications: VKP series relays for flashing lamp applications are typically used for turn signal, hazard warning, emergency vehicle, and security system applications. They may also be used for high in-rush current capacitive loads such as audio amplifiers. Use on inductive loads or loads with high continuous load currents should be avoided. The relay should also not be used for applications which do not have a significant make current as high contact voltage drop may result. Standard Current Relays: VKP series relays for flashing lamp applications which are indicated as "standard current" units are generally suitable for passenger car and light truck applications for turn signal, hazard warning, or combination flashers (with or without normal trailering requirements) for 2 or 3 bulb turn signal systems. They are also generally suitable for security system applications for lamp flashing and for most audio amplifier applications. High Current Relays: VKP series relays for flashing lamp applications which are designated as "high current" have larger contacts, a larger shunt connecting the movable contacts to the output terminals, and other performance enhancing characteristics to provide longer life and provide higher current carrying capacity. This type relay should be used for truck applications which have greater load current and in applications such as emergency vehicle lighting and service vehicle hazard warning lights which have very high cycle life requirements . The high current versions are also recommended for most alternating flasher applications, as this version has much improved performance of the normally closed contact. However, optimum life can be obtained for alternating applications by using two normally open relays and powering the coils alternately. Note: Bulb as used here is a 27 watt turn signal bulb, trade #1156. Testing includes operations at -40C, 23C, and 85C. High Current Relays: 3 bulb T/S system, combined turn signal and hazard warning with special trailering (test requirements): 3 bulb 2.1 million operations 6 bulb 194 K operations 7 bulb 259 K operations 14 bulb 497 K operations TOTAL 3.0 million operations This application represent about the limit of the performance capability of the "high current" types. It should be noted that the low current operations have very little affect on the total product life where as the 14 bulb (33 ampere) operations are extremely destructive. Units test on 14 bulb (only) loads can be expected to fail at less than 1 million operations. Note: Bulb as used here is a 27 watt turn signal bulb, trade #1156. Testing includes operations at -40C, 23C, and 85C. Design Considerations: It should be noted that although the VKP series relays are capable of handling relatively high currents, when applying the product under high current and high ambient temperature conditions, providing adequate conductor volume is critical, as is the solder connection, particularly with respect to the normally open contact terminal. It may be necessary to use high temperature solder, a plated through hole PCB, or a copper lead frame type construction under these conditions to prevent failure of the solder joint. Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Flashing at 50% Duty Cycle (Steady Current, Open Style) Consult factory. Ordering Information Part Number VKP-11 * 32 VKP-11 * 62 VKP-15 * 62 VKP-31 * 32 VKP-31 * 62 VKP-35 * 62 *Standard Coil Voltages: Contact Arrangement Contact Material Enclosure Load Ratings 1 Form A 1 Form A 1 Form C 1 Form A 1 Form A 1 Form C PdCu/AgNi 0.15 PdCu/AgNi 0.15 PdCu/AgNi 0.15 PdCu/AgNi 0.15 PdCu/AgNi 0.15 PdCu/AgNi 0.15 Open Open Open Immersion Cleanable Case Immersion Cleanable Case Immersion Cleanable Case Standard Current High Current High Current Standard Current High Current High Current F = 12VDC H = 24VDC (Consult factory for availability) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Dimensions are shown for 1010 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions Open Model Sealed Model .866 MAX. (22.0) 1.04 MAX. (26.5) .911 MAX. (23.1) X .748 MAX. (19.0) .715 MAX. (18.2) .878 MAX. (22.3) .150 MAX. (3.8) .150 MAX. (3.81) EXCLUDING SOLDER Wiring Diagrams (Bottom Views) Open Models Sealed Models 1 Form A 5 1 4 1 Form C 3 5 4 2 1 Form A 1 4 4 2 1 Form C 3 5 4 5 1 2 4 4 1 4 4 2 4 Suggested PC Board Layouts (Bottom Views) Open Model Sealed Model Hole Size Hole Size .083 .055 DIA. (1.4) (2.1) 2 PLACES .055 DIA. .083 (1.4) (2.1) 2 PLACES .062 (1.6) 3 3 .043 (1.1) 2 PLACES 5 4 1 2 .043 (1.1) 2 PLACES .086 (2.2) 4 4 5 .19 MAX. (4.8) .148 (3.75) .289 MAX. (7.3) 3 4 1 2 4 .161 (4.08) .211 (5.35) .148 (3.75) 3 .467 (11.87) Center-To-Center .586 (14.88) .211 (5.35) .213 (5.4) .086 (2.2) 2 PLACES .062 (1.6) 2 PLACES Center-To-Center .134 (3.4) .147 (3.73) .147 .467 (3.73) (11.87) .092 (2.33) 4 .161 (4.08) .483 (12.28) Dimensions are shown for reference purposes only. 4 4 .086 (2.2) 2 PLACES .062 (1.6) 2 PLACES 1 2 5 Dimensions are in inches over (millimeters) unless otherwise specified. 5 1 2 4 4 .483 (12.28) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1011 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS V2R series 20 Amp DC Motor Reversing PC Board Relay for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * * * * * * * Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 5 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.) 20A, 16VDC switching rating. 75A inrush at 16VDC. 20A continuous contact rating @ 85C. Operation to 105C ambient. Immersion cleanable plastic case with knock-off nib for ventilation. Low profile package has a seated height of only .67" (17 mm). H-Bridge motor reversing arrangement. Environmental Data Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23C Ambient, 20-50% RH, 29.5 1.0" Hg.) unless otherwise noted. Contact Data Arrangements: 2 x 1 Form C (H-Bridge). Material: AgNi 0.15 (consult factory for other contact materials). Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Switching Voltage: 24VDC. Max. Load Current 23C (@ 14VDC Load Voltage): Continuous Carry: 20 Amperes Intermittent Carry: 40 Amperes for 30 seconds. Make: 75 Amperes Break: 40 Amperes Max. Switching Power: 320 watts DC (voltage dependent) (1) Min. Recommended Current: 0.5 amp @ 12VDC. Initial Voltage Drop: 400 millivolts, maximum (measured between load terminals) @ 10 amp contact load. Nominal Circuit Resistance: 6 milliohms load terminal to load terminal @ 10 amp (this value is provided for circuit design purposes only and is not a specified parameter). Expected Life: Mechanical: 10 million operations. Electrical: 20A, 14VDC, 1mH > 100K operations. 40A, 14VDC, 0.5mH > 10K operations. Initial Insulation Resistance @ 500VDC Temperature Range: Storage: -40C to +155C. Operating: -40C to +105C.(2) Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Mechanical Data Termination: Printed circuit terminals. Enclosure: Immersion cleanable, sealed plastic cover. Weight: Sealed: 25 gm (0.9 oz.) approximately. Audible Sound: 95dBA @ 10 cm, 14VDC coil voltage. 77dBA @ 1 M, 14VDC coil voltage. Abnormal Operation Overload Current: 40A, 36 sec.(3) 80A, 10 sec. 150A, 2.5 sec. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23C. Drop Test: Capable of meeting specifications after a 1.0 meter drop onto concrete in final enclosure. Flammability: UL94V-0 (meets FMVSS 302). Notes Between Contacts and Coil: 10 megaohms. Between Open Contacts: 10 megaohms. Coil Data Voltage: 12VDC. Resistance: See Coil Data table. Nom. Power: See Coil Data table. Thermal Resistance: 55C per actual coil watt in still air with no contact load current. (1) See Figure 1. (2) See Figure 2. (3) Current and times are compatable with circuit protection by a typical 20A circuit breaker. Relay will make, carry and break the specified current. (4) Allowable overdrive is rated at ambient temperature of 23C and 105C, as stated, with a 10A load current flowing throuth the relay contacts and minimum coil resistance with power applied for 30 sec. max. (20% max. duty cycle). For continuous duty information, see Figure 2 (AmbientTemperature vs. Coil Voltage for Continuous Duty.) Coil Data (@ 23C Coil Temperature) Relay Part Number Rated Coil Voltage (VDC) Coil Resistance 10% (Ohms) Coil Inductance (H) (Ref.) Must-Operate Voltage (VDC) Must-Release Voltage (VDC) Nominal Power (Watts) V2R-1001 12 150 0.7 6.0 0.9 0.93 Dimensions are shown for 1012 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Allowable (4) Overdrive (VDC) @ 23C @ 105C 24V 16V www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load At present, these data are still to be determined. Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Duty Assumptions: Maximum Allowable Ambient Temperature (C) 130 1. 2. 3. 4. 5. Thermal resistance = 55C per watt Still air Nominal coil resistance (150) Maximum mean coil temperature = 180C Coil temperature rise due to load = 3C @ 4 amps = 9C @ 8 amps = 19C @ 12 amps = 31C @ 16 amps = 51C @ 20 amps 6. Thermal resistance and power dissipation based on coil resistance at 180C 7. Curves are based on 0.96 watts at 23C 8. When full lifetime is at high ambient and high load current, subtract 25C from maximum allowable ambient temperature. 120 110 0 Amp Contact Load 4 Amp Contact Load 100 8 Amp Contact Load 90 12 Amp Contact Load 80 16 Amp Contact Load 70 60 20 Amp Contact Load 50 40 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Typical Application Schematic Ordering Information Part Number Coil Resistance V2R-1001 150 +12VDC +12VDC COIL A +12VDC COIL B MOTOR Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) Tolerance (unless otherwise noted): 3 decimal: .010 (.254); 2 decimal: .015 (.381). 2 x 1 Form C (H-Bridge) 2 .650 MAX. (16.5) 1.46 MAX. (37.1) .140 (3.6) .480 (12.2) 8 .052 DIA. TYP. (1.3) .480 (12.2) .079 (2.0) .079 (2.0) .079 (2.0) Dimensions are shown for reference purposes only. 4 Suggested PC Board Layout .236 (6.0) .472 (12.0) .632 (16.1) 7 5 .236 (6.0) .079 (2.0) 6 1 .67 MAX. (17.0) .030 MAX. (0.8) 3 Dimensions are in inches over (millimeters) unless otherwise specified. .632 (16.1) Specifications and availability subject to change. .236 (6.0) www.tycoelectronics.com Technical support: Refer to inside back cover. 1013 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VFM series 20 Amp Relay With Quick Connect Terminals for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * 20A continuous contact rating @ 85C. * 1 Form A and 1 Form C arrangements. * Plug-in terminals. * Plastic enclosure. Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 4 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage). Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23C Ambient, 20-50% RH, 29.5 1.0" Hg.) unless otherwise noted. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: AgNi 0.15 and AgSnO (consult factory for other contact materials). Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Switching Voltage: 75VDC(1). Max. Load Current (@ 14VDC Load Voltage): Load Form A (NO) Max. Continuous Current Max. Make Current Max. Break Current(1) 20A 120A (2) 30A 20A 120A (2) 30A Temperature Range: Storage: -40C to +155C. Operating: -40C to + 125(4). Shock: 10g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Mechanical Data Form C NO Environmental Data NC 10A 40A 15A Max. Switching Power: 35-250 watts DC (voltage dependent(1). Min. Recommended Current: 1.0 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 15 amp contact load. 250 millivolts, maximum, for normally closed contacts @ 10 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 20 amps, 14VDC, resistive load on normally open contact. Termination: Quick connect. Enclosure: Plastic dust cover. Weight: With QC terminals: 20g (0.7 oz.) approximately. Abnormal Operation Overload Current: 40A, 36 sec.(5) 80A, 10 sec. 200A, 2.5 sec. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23C. Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter) drop onto concrete in final enclosure. Flammability: UL94-HB or better (meets FMVSS 302). Initial Dielectric Strength Between Contacts and Coil: 500V rms. Notes Coil Data Voltage: 12VDC. Resistance: See Coil Data table. Nom. Power: (@ 23C coil temp. and rated coil voltage.): 1.6W, unsuppressed. 1.81W, with 680 ohm resistor. Thermal Resistance: 50C per actual coil watt in still air with no contact load current. (1) See Figure 1. (2) Inrush current for lamp load. (3) Allowable overdrive is rated at ambient temperature for 23C or 85C as stated with no load current flowing through the relay contacts and minimum coil resistance. Also see Figure 2 for maximum ambient temperature versus applied coil voltage. (4) See Figure 2. (5) Current and times are compatible with circuit protection by a typical 20A automotive circuit breaker. Relay will make, carry and break the specified current. Coil Data (@ 23C Coil Temperature) Coil Designator (VDC) Rated Coil Voltage (VDC) Coil Resistance 10% (Ohms) Coil Inductance (H) (Ref.) Must-Operate Voltage (VDC) Must-Release Voltage (VDC) F 12 90 0.5 7.2 1.2 Dimensions are shown for 1014 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Allowable (3) Overdrive @ 23C @ 85C 20.4 14.9 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load Safe breaking, arc extinguished (normally open contact) for resistive loads. 75 Switching Voltage (VDC) 60 50 40 20 0W 10 30 0W 25 0W 20 40 W 10 0.5 1 10 12 7 2 3 4 5 Switching Current (Amps) 20 Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Load Maximum Allowable Ambient Temperature (C) 130 Assumptions: 1. 2. 3. 4. 5. Thermal resistance = 50C per watt Still air Nominal coil resistance Maximum mean coil temperature = 180C Coil temperature rise due to load = 1C @ 4 amps = 4.5C @ 8 amps = 9.5C @ 12 amps = 18C @ 16 amps = 26.5C @ 20 amps 6. Thermal resistance and power dissipation based on coil resistance at 180C 7. Curves are based on 1.5 watts at 23C 8. When full lifetime is at high ambient and high load current, subtract 25C from maximum allowable ambient temperature. 120 110 100 90 80 0 Amp Contact Load 4 Amp Contact Load 8 Amp Contact Load 12 Amp Contact Load 70 60 16 Amp Contact Load 50 20 Amp Contact Load 40 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Part Number Contact Arrangement Terminals Contact Material VFM-11F21 VFM-11F41 VFM-15F21 VFM-15F41 1 Form A 1 Form A 1 Form C 1 Form C Quick connect Quick connect Quick connect Quick connect AgNi 0.15 AgSnO AgNi 0.15 AgSnO *Standard Coil Voltages: F = 12VDC Optional Coil Suppression Add suffix -S01 for 680 ohm resistor in parallel with 12VDC coil. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present.. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1015 Catalog 1308242 Issued 3-03 Outline Dimensions TYCO ELECTRONICS Wiring Diagrams (Bottom Views) .906 MAX. (23.0) .610 MAX. (15.5) 1 Form C 1 Form A 2 5 2 3 5 3 4 1.024 MAX. (26.00) RESISTOR IF USED RESISTOR IF USED 1 1 .453 MAX. (11.5) .187 (4.8) .236 (6.0) .250 (6.3) .315 (8.0) 2 .354 (9.0) 3 5 4 1 .451 (11.45) Connector Connectors For Use With VFM Relays PC Board Socket VCFM-1000 Wire Harness Style, Bracket Mount Socket (Order Terminals Separately) VCFM-1002 .829 .0 08 (21.06 0.2) .619 .0 08 (15.72 0.2) 1.101 .015 (27.97 0.38) .250 (6.3) FEMALE Q.C. TERMINALS .380 REF. (9.65) .234 .016 (5.94 0.4) .060 REF. (1.52) .571 .0 08 (14.5 0.2) .031 .0 04 (0.8 0.1) .236 (6.0) .309 (7.86) .080 (2.03) .619 (15.71) .715 (18.15) .107 R. (2.72) 2x .177 (4.50) .315 (8.00) 1.420 .015 (36.07 0.38) .814 .015 (20.68 0.38) .188 (4.8) FEMALE Q.C. TERMINALS .470 (11.94) .235 (5.97) 5x o .092 (2.34) .714 .015 (18.12 0.38) Connector/Terminal Usage Chart - Boldface items are stocked. Connector Terminal P/N VCFM-1000 VCFM-1002 None 26A1349A 26A1349B 26A1492A 26A1492B Dimensions are shown for 1016 reference purposes only. Required Crimp Terminals (Order Separately) Alternate P/N Wire AWG Qty. Required Form A Form C None N/A N/A N/A AMP 60249-1 12-16 2 2 AMP 42281-1 14-18 G&H K26313 15-20 2 3 G&H K26312 14-16 Dimensions are in inches over (millimeters) unless otherwise specified. Use in Cavities Form A Form C N/A N/A 3&5 3&5 1&2 1, 2 & 4 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VF4 series 40 Amp Relay With PC Board or Quick Connect Terminals for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * 40A continuous contact rating @ 85C. * 1 Form A and 1 Form C arrangements. * Plug-in or PC board terminals. * Optional mounting bracket. * Various enclosure options. Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 7 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.) Environmental Data Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23C Ambient, 20-50% RH, 29.5 1.0" Hg.) unless otherwise noted. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: AgNi 0.15 (consult factory for other contact materials). Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Switching Voltage: 75VDC(1). Max. Load Current (@ 14VDC Load Voltage): Load Max. Continuous Current Max. Make Current (2) Max. Break Current (1) Form A (NO) NO Form C NC 60A 120A 60A 60A 120A 60A 40A 45A 40A Max. Switching Power: 50-500 watts DC (voltage dependent) (1). Min. Recommended Current: 1 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 40 amp contact load. 250 millivolts, maximum, for normally closed contacts @ 30 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 40 amps, 14VDC, resistive load on normally open contact. Initial Dielectric Strength Temperature Range: Storage: -40C to +155C. Operating: -40C to +125C (4). Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5 g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10 g's constant. Mechanical Data Termination: 0.250" quick connect and printed circuit terminals. Enclosures: Dust Cover: Protects relay from dust. For use in passenger compartment or enclosures. Shrouded Dust Cover: Protects relay and relay connector (order separately) from dust and splash. Weatherproof Cover: Mates with a connector (order separately) to seal relay from salt spray etc. Recommended for under hood application. Cover Retention: Dust cover will withstand a 33.7 pound (150 Newton) force (axially applied) without detachment. Ultrasonic cover: 50 pound (220 Newton). Weight: 31g (1.1 oz.) approximately (dust cover model). Abnormal Operation Overload Current: Consult factory. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23C. Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter) drop onto concrete. Flammability: UL94V-0 external; UL94-HB or better, internal parts (meets FMVSS 302). Notes Between Contacts and Coil: 500V rms. Coil Data Voltage: 6, 12 and 24VDC. Resistance: See Coil Data table. Nom. Power: (@ 23C coil temp. and rated coil voltage.): 1.6W, unsuppressed. 1.81W, with 680 ohm resistor. Thermal Resistance: 50C per actual coil watt in still air with no contact load current. (1) See Figure 1. (2) Inrush current for lamp load. (3) Allowable overdrive is rated at ambient temperature for 23C or 85C as stated with no load current flowing through the relay contacts and minimum coil resistance. Also see Figure 2 for maximum ambient temperature versus applied coil voltage. (4) See Figure 2. (5) Current and times are compatible with circuit protection by a typical automotive circuit breaker. Relay will make, carry and break the specified current. Coil Data Coil Designator Rated Coil Voltage (VDC) Coil Resistance 10% (Ohms) Coil Inductance (H) (Ref.) Must-Operate Voltage (VDC) Must-Release Voltage (VDC) D F H 6 12 24 22.5 90 360 0.2 0.8 2.7 3.6 7.2 14.4 0.6 1.2 2.4 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Allowable (3) Overdrive (VDC) @ 23C @ 85C 10.1 20.2 40.5 7.9 15.7 31.5 www.tycoelectronics.com Technical support: Refer to inside back cover. 1017 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load 75 Safe breaking, arc extinguished (normally open contact) for resistive loads. Switching Voltage (VDC) 60 50 40 30 50 0W 20 20 0W 10 0W 10 0.5 1 2 3 5 4 7 10 20 30 40 Switching Current (Amps) Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Duty 130 Assumptions: 1. Thermal resistance = 50C per watt 2. Still air 3. Nominal coil resistance 4. Maximum mean coil temperature = 180C 5. Coil temperature rise due to load = 2C @ 8 amps = 5C @ 16 amps = 11C @ 24 amps = 20C @ 32 amps = 32C @ 40 amps 6. Thermal resistance and power dissipation based on coil resistance at 180C 7. Curves are based on 1.6 watts at 23C 8. When full lifetime is at high ambient and high load current, subtract 25C from maximum allowable ambient temperature. Maximum Allowable Ambient Temperature ( C) 120 110 100 90 80 70 0 Amp Contact Load 8 Amp Contact Load 16 Amp Contact Load 60 24 Amp Contact Load 50 32 Amp Contact Load 40 40 Amp Contact Load 30 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Part Number VF4-11 * VF4-11 * VF4-15 * VF4-15 * VF4-25 * VF435 * VF4-41 * VF4-45 * VF4-45 * VF4-51 * VF4-55 * VF4-61 * VF4-65 * VF4-81 * VF4-85 * 11 13 11 13 11 11 11 11 21 11 11 11 11 11 11 *Standard Coil Voltages: Contact Arrangement Contact Material Enclosure Terminals 1 Form A 1 Form A 1 Form C 1 Form C 1 Form C 1 Form C 1 Form A 1 Form C 1 Form C 1 Form A 1 Form C 1 Form A 1 Form C 1 Form A 1 Form C AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgSnO AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 AgNi0.15 Dust cover Dust cover Dust cover Dust cover Shrouded dust cover Weatherproof cover Dust cover with bracket Dust cover with bracket Dust cover with bracket Shrouded dust cover with bracket Shrouded dust cover with bracket Weatherproof cover with bracket Weatherproof cover with bracket Dust cover with molded bracket Dust cover with molded bracket Quick connect Printed circuit Quick connect Printed circuit Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect Quick connect D = 6VDC (Consult factory for availability). F = 12VDC H = 24VDC (Consult factory for availability). Optional Coil Suppression Add suffix -S07 for 180 ohm resistor in parallel with 6VDC coil. Add suffix -S01 for 680 ohm resistor in parallel with 12VDC coil. Add suffix -S08 for 2,700 ohm resistor in parallel with 24VDC coil. Epoxy Sealed Construction Add suffix -C01 for epoxy sealed unit. Add suffix -C05 for epoxy sealed unit with resistor. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. VF4-15F11 VF4-15F13 VF4-45F11 VF4-15H11 VF4-15H13 VF4-65F11-S01 Dimensions are shown for 1018 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions Dust Cover With Quick Connect Terminals Plastic Bracket Cover With Quick Connect Terminals VF4-1_ _ (Without Bracket) & VF4-4_ _ (With Bracket) VF4-8_ _ _ _ 1.10 MAX. (28.0) .59 (15.0) .236 (6.0) .638 (16.2) o .209 (5.3) .866 .020 (22.0 0.5) .197 (5.0) .170 .008 (4.32 0.2) .236 .015 (6.0 0.4) .079 .008 (2.0 0.2) 1.10 MAX. (28.0) 1.10 MAX. (28.0) 1.004 MAX. (25.5) .622 .024 (15.8 0.61) o.213 .004 (5.4 0.1) 1.004 MAX. (25.5) .453 MAX. (11.5) .250 (6.3) .453 MAX. (11.5) .250 (6.3) 1.10 MAX. (28.0) .315 (8.0) .032 .001 (0.81 0.03) .250 (6.3) .122 (3.1) 86 30 Printed Circuit Board Terminals 87A .661 (16.8) Clinchable Power 87 85 .098 (2.50) .331 (8.4) .705 (17.9) TERMINALS #30, 87, & 87a Single Pin .126 (3.2) .098 (2.50) TIN PLATED Shrouded Dust Cover With Quick Connect Terminals Weatherproof Cover With Quick Connect Terminals VF4-2_ _ (Without Bracket) & VF4-5_ _(With Bracket) VF4-3_ _ (Without Bracket) & VF4-6_ _(With Bracket) .355 (9.0) .653 .066 (16.6 0.15) .732 (18.6) .354 (9.0) .26 (6.6) .886 (22.5) .728 .010 (18.5 0.25) .252 (6.4) 1.516 MAX. (38.0) .453 MAX. (11.5) 1.77 .019 (45.0 0.5) .285 (7.25) .165 .006 (4.20 0.15) .453 MAX. (11.5) .167 (4.25) .16 MAX. (4.1) .482 (12.25) .250 TYP. (6.3) .245 (6.3) 1.26 MAX. (32.0) .984 MAX. (25.0) 1.42 MAX. (36.1) .157 (4.0) .295 .018 (7.5 0.45) .775 .006 (19.7 0.15) .453 .006 (11.50 0.15) 1.42 MAX. (36.1) .276 REF. (7.0) 1.26 MAX. (32.0) .331 (8.4) 30 87A 86 85 .331 (8.4) 87 .705 (17.9) 87 86 .315 (8.0) .177 (4.5) 30 85 87a .705 (17.9) .472 .015 (12.0 0.38) .661 (16.8) .66 (16.8) .354 (8.0) Suggested PC Board Layouts (Bottom Views) VF4-XXX13 Wiring Diagrams (Bottom Views) 1 Form A 1 Form C 86 86 87 30 85 1019 87a Dimensions are shown for reference purposes only. 30 RESISTOR IF USED 85 .331 (8.4) VF4-XXX12 .102 (2.6) .661 (16.8) .315 (8.0) 87 RESISTOR IF USED Dimensions are in inches over (millimeters) unless otherwise specified. .055 (1.4) .705 (17.9) .331 (8.4) Specifications and availability subject to change. .331 (8.4) .071 .102 (1.8) (2.6) .661 (16.8) .055 (1.4) .803 (20.4) .055 (1.4) .197 (5.0) .098 (2.5) .315 (8.0) .331 (8.4) www.tycoelectronics.com Technical support: Refer to inside back cover. 1019 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Connectors Connectors For Use With Quick Connect Terminal VF4-1_ _ _ _ , VF4-4_ _ _ _ And VF4-8_ _ _ _ Relays Wiring Harness Style Connector (order terminals separately) PC Board Socket VCF4-1000 .274 (7.0) .111 (2.8) .040 (1.0) VCF4-1001 .295 (7.5) .256 (6.5) .083 (2.1) .512 (13.0) .571 (14.5) .805 (20.4) 1.043 (26.5) .945 (24.0) .092 (2.3) 5 HOLES .665 (16.9) .945 (24.0) .090 (2.3) .083 (2.1) 2 LOCATING PINS .705 (17.9) .143 (3.6) .315 .331 (8.0) (8.4) 1.043 (26.5) .905 (23.0) Wiring Harness Style, Bracket Mount Socket (order terminals separately) (Mount individually or can be interlocked) Connector For Use With VF4-2_ _ _ _ or VF4-5_ _ _ _ Relays With Shrouded Dust Cover (order terminals separately) VCF4-1002 VCF4-1003 .36 (9.1) 1.09 (27.6) 2 .315 (8.0) 1.20 (30.5) 1.31 (33.3) 24A111 terminal retainer supplied with connector 4 1.00 (25.4) 3 .331 .661 (8.4) (16.8) 1 .48 (12.2) 1.57 (39.9) 1.11 (28.1) 1.42 (36.1) 5 .218 (5.5) .331 (8.4) .705 (17.9) Connector For Use With VF4-3_ _ _ _ or VF4-6_ _ _ _ Relays With Weatherproof Cover Connectors to mate with the weatherproof cover relays are available from Delphi Packard (1-800-PACKARD). (Typical Delphi Packard part number: 12065685). Connector/Terminal Usage Chart - Our authorized distributors are more likely to stock boldface items. Required Crimp Terminals (Order Separately) Connector Terminal P/N Alternate P/N Wire AWG VCF4-1000 None 26A1349A 26A1349B 26A1348A 26A1348B 26A1348C None AMP 60249-1 AMP 42281-1 Packard 12015864 Packard 12015865 Packard 12084588 N/A 12-16 14-18 18-20 14-16 10-12 VCF4-1001 VCF4-1002 VCF4-1003 Dimensions are shown for 1020 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Qty. Required Form A 0 Form C 0 4 5 4 5 Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VF7series 70 Amp Relay With PC Board or Quick Connect Terminals for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data * 70A continuous contact rating @ 85C. * 1 Form A arrangements. * Plug-in or PC board terminals. * Optional mounting bracket. Must Operate and Must Release Voltage: See Coil Data table. Initial Operate Time: 7 milliseconds, typical, with rated coil voltage applied. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage). Conditions Environmental Data All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23C Ambient, 2050% RH, 29.5 1.0" Hg.) unless otherwise noted. Temperature Range: Storage: -40C to +155C. Operating: -40C to +125C (4). Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Contact Data Arrangements: 1 Form A (SPST-NO). Material: AgNi 0.15 (consult factory for other contact materials). Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Switching Voltage: 75VDC(1). Max. Load Current (@ 14VDC Load Voltage): Max. Continuous Current: 70A. Max. Make Current: 120A(2). Max. Break Current (1): 70A. Max. Switching Power: 60-800 watts DC (voltage dependent) (1). Min. Recommended Current: 1 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, max., @ 70 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 70 amps, 14VDC, resistive load. Initial Dielectric Strength Between Contacts and Coil: 500V rms. Mechanical Data Termination: 0.250" and 0.375" quick connect and printed circuit terminals. Enclosures: Plastic dust cover. Cover Retention: Cover will withstand a 33.7 pound (150 Newton) force (axially applied) without detachment. Weight: 31g (1.1 oz.) approximately. Abnormal Operation Overload Current: 140A, 60 sec.(5) 245A, 2 sec. 420A, 0.15 sec. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23C. Drop Test: Capable of meeting specifications after a 1.0 meter drop onto concrete, (Sealed model only.) Flammability: UL94-HB or better (meets FMVSS 302). Notes Coil Data Voltage: 12 and 24VDC. Resistance: See Coil Data table. Nom. Power: (@ 23C coil temp. and rated coil voltage): 2.0W, unsuppressed. 2.21W, with 680 ohm resistor. Thermal Resistance: 50C per actual coil watt in still air with no contact load current. (1) See Figure 1. (2) Inrush current for lamp load. (3) Allowable overdrive is rated at ambient temperature for 23C or 85C as stated with no load current flowing through the relay contacts and minimum coil resistance. Also see Figure 2 for maximum ambient temperature versus applied coil voltage. (4) See Figure 2. (5) Current and times are compatible with circuit protection by a typical 70A automotive fuse. Relay will make, carry and break the specified current. Coil Data (@ 23C Coil Temperature) Coil Designator Rated Coil Voltage (VDC) Coil Resistance 10% (Ohms) Coil Inductance (H) (Ref) Must-Operate Voltage (VDC) Must-Release Voltage (VDC) F H 12 24 72 288 0.5 2.0 7.2 14.4 1.2 2.4 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Allowable (3) Overdrive (VDC) @ 23C @ 85C 18.1 14.1 36.2 28.2 www.tycoelectronics.com Technical support: Refer to inside back cover. 1021 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load Safe breaking, arc extinguished (normally open contact) for resistive loads. 100 0W 0W 80 50 0W 0W 20 10 Switching Voltage (VDC) 200 50 40 30 20 10 0.5 1 3 4 5 7 1012 2 Switching Current (Amps) 20 50 70 Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Duty 130 Assumptions: 1. 2. 3. 4. 5. Maximum Allowable Ambient Temperature (C) 120 110 100 90 80 70 60 50 0 Amp Contact Load 14 Amp Contact Load 28 Amp Contact Load 42 Amp Contact Load 56 Amp Contact Load 40 30 20 Thermal resistance = 50C per watt Still air Nominal coil resistance Maximum mean coil temperature = 180C Coil temperature rise due to load = 2C @ 14 amps = 4C @ 28 amps = 7C @ 42 amps = 12C @ 56 amps = 22C @ 70 amps 6. Thermal resistance and power dissipation based on coil resistance at 180C 7. Curves are based on 2.0 watts at 23C 8. When full lifetime is at high ambient and high load current, subtract 25C from maximum allowable ambient temperature. 70 Amp Contact Load 10 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Part Number Contact Arrangement Enclosure Terminals VF7-11 * 11 VF7-11 * 12 VF7-41 * 11 1 Form A 1 Form A 1 Form A Dust cover Dust cover Dust cover with bracket Quick connect Printed circuit (clinch) Quick connect *Standard Coil Voltages: F = 12VDC H = 24VDC (Consult factory for availability) Optional Coil Suppression Add suffix -S01 for 680 ohm resistor in parallel with 12VDC coil. Add suffix -S08 for 2700 ohm resistor in parallel with 24VDC coil. Epoxy Sealed Construction Add suffix -C01 for epoxy sealed unit. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. VF7-11F11 VF7-11F12 VF7-41F11 Dimensions are shown for 1022 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions Dust Cover With Quick Connect Terminals 1.04 MAX. (26.5) .59 (15.0) .165 MAX. (4.2) Printed Circuit Board Terminals .236 (6.0) .630 (16.0) 1.04 MAX. (26.5) 1.04 MAX. (26.5) 1.04 MAX. (26.5) .992 MAX. (25.2) .209 DIA. (5.3) .118 (3.0) .992 MAX. (25.2) .453 MAX. (11.5) .059 (1.5) TIN PLATED .150 (3.8) 2 PLACES .032 (0.8) .375 (9.5) .709 MAX. (18.0) 30 .250 (6.3) 2 PLACES .047 (1.2) .375 (9.5) 85 86 .118 (3.0) 87 30 85 .705 .331 (17.9) (8.4) 86 87 .661 (16.8) .118 (3.0) Wiring Diagram (Bottom View) Suggested PC Board Layout (Bottom View) 1 Form A .150 (3.8) 86 .150 (3.8) RESISTOR IF USED 87 30 .706 (17.9) .331 (8.4) .076 (1.93) 2 PLACES .086 (2.18) 6 PLACES 85 .335 (8.5) .150 (3.8) .669 (17.0) .150 (3.8) Connector Wiring Harness Style Connector For Use With Quick Connect VF7 Relays (order terminals separately) VCF7-1000 1.240 (31.50) 1.275 (32.38) 1.057 (26.85) Connector/Terminal Usage Chart - Our authorized distributors are more likely to stock boldface items. Required Crimp Terminals (Order Separately) Connector Terminal P/N Alternate P/N Wire AWG Qty. Required VCF7-1000 26A 1350A 26A 1350B 26A 1349B AMP 280756-4 AMP 280755-4 AMP 42281-1 10-12 6-10 14-18 2 (Contacts) 2 (Contacts) and 2 (Coil) Note: For information on crimping tools, please consult local representative or factory. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1023 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VTF series Flasher Modules for Automotive Applications Safety Standards: U.S.A.: SAE J 590 (turn signal) SAE J 945 (hazard warning) SAE J 2068 (turn signal/hazard warning) FMVSS 108 (all) European: Designed to meet ECO guideline 76/756 requirements. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data * Combination turn signal and hazard warning signal flasher.(1) * Meets all applicable U.S.A. safety standards. * Stable electronic timing. * VKP relay with PdCu contact for output. * Fits ISO 7588 socket. * Wide operating voltage and temperature range. Operating Ambient Temperature Range: -40C to +85C. Storage Ambient Temperature Range: -40C to +125C. Shock: 20g, 10 millisecond, half sine wave pulse. Vibration: 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Conditions All parametric, environmental and life tests are performed according to EIA Standard RS407-A at standard test conditions (23C Ambient, 20-50% RH, 29.5 1.0" Hg.) unless otherwise noted. Mechanical Data Contact Load Requirements @ 12.8VDC Turn Signal Mode Hazard Mode Loads 5 Lamp System 5 Lamp System Rated Loads 5x27W + 1x3.5W + 1x1.3W 10x27W + 2x3.5W + 2x1.3W Termination: 0.250"(6.35mm) quick connect. Enclosures: Dust Cover: Protects relay from dust. Cover Retention: 50 pound (220 Newton) minimum. Weight: 1.3 oz. (37g) approximately. Abnormal Operation Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter) drop onto concrete in final enclosure. Flammability: UL94-HB or better (meets FMVSS 302). Flash Rate and Duty Cycle Data Turn Signal Mode Hazard Mode Normal Signal Normal Signal FPM Duty Cycle FPM Duty Cycle 70-110 35-55% 70-110 35-55% Operate Data Notes Nominal Voltage: 12VDC system. Operating Voltage Range: 9 - 16VDC. Device Voltage Drop: Less than 0.400 VDC at rated turn signal load. Less than 0.450 VDC at rated hazard signal load. Inital Turn-on Time: Less than or equal to 50 msec. Start Time: Less than 1.0 sec per FMVSS 108. Sound Pressure Level : Min. 72 dbA at 1.0 meters.(2) (1) Three lamp combination flashers with three terminals do not meet U.S. Federal motor vehicle safety requirements when lamp outage occurs during hazard mode operation. For more information consult factory. (2) The actual sound pressure is highly dependent on mounting method used. Ordering Information Meets the Safety Standard of: Flasher Type Part Number U.S.A. Turn VTF-11F31 VTF-14F11 X X X Turn Signal Mode Max. Number of Lamps Lamp Outage Sensing Turn/Hazard Warning 5 Lamp System Hazard No X X 10 X Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Dimensions are shown for 1024 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Wiring Diagram (Bottom View) Figure 1 - Electrical Contact Life vs. Load Power 300 _ L a m p L o a d ( Wa tt s ) VTF-14F11 250 * 200 BATTERY 150 + * TO LAMP LOAD L + 100 50 0 1.0 1.5 2.0 2.5 Number of Cycles (Millions) 3.0 Connectors Outline Dimensions Wiring Harness Style Connector (order terminals separately) 1.398 MAX. (35.5) VCF4-1001 .090 (2.3) .945 (24.0) 1.12 MAX. 28.5 .331 .006 (8.4 .15) 3X TABS TO ISO STANDARD 8092 DIN 46244 .25 (6.3) X .032 (0.8) 1.043 (26.5) 1.12 MAX. 28.5 .453 MAX. (11.5) .905 (23.0) L CL OF TERMINALS .33 .006 (8.35 .15) .66 .006 (16.80 .15) Sockets Wiring Harness Style, Bracket Mount Socket (order terminals separately) PC Board Socket VCF4-1000 .111 (2.8) VCF4-1002 .274 (7.0) .295 (7.5) .040 (1.0) .256 (6.5) .083 (2.1) (13.0) 1.043 (26.5) .571 (14.5) .805 (20.4) .083 (2.1) 2 LOCATING PINS .48 (12.2) .092 (2.3) 5 HOLES .665 (16.9) .512 .945 (24.0) .315 (8.0) .143 (3.6) .705 (17.9) .331 (8.4) .218 (5.5) .36 (9.1) 1.00 (25.4) 1.57 (39.9) 24A111 terminal retainer supplied with connector 1.09 (27.7) 1.31 (33.3) Connector/Terminal Usage Chart - Our authorized distributors are more likely to stock boldface items. Connector VCF4-1000 VCF4-1001 VCF4-1002 Dimensions are shown for reference purposes only. Terminal P/N None 26A1349A 26A1349B 26A1348A 26A1348B 26A1348C Required Crimp Terminals (Order Separately) Alternate P/N Wire AWG Qty. Required None N/A 0 AMP 60249-1 12-16 3 AMP 42281-1 14-18 Packard 12015864 18-20 Packard 12015865 14-16 3 Packard 12084588 10-12 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1025 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Engineering Notes Dimensions are shown for 1026 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SOLID STATE RELAYS & MODULES Alphanumeric Index Series Type Page 2IO .................... Mtg. Board for Standard I/O Modules .... 1114 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays . 301-336 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Relays with Forcibly-Guided Contacts.............. 36-79 6 Plug-in/Panel Mount General Purpose Relays............ 701-749 7 Power Relays & Definite Purpose Contactors...................... 89-131 8 Latching, Impulse & Rotary Relays ............................... 149-154 9 Automotive Relays................ 1001-1025 10 Solid State Relays & Input/Output Modules ............ 1101-1126 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 2IOM ................. Mtg. Board for Slim Line I/O Modules .. 1122 IAC .................... Standard AC Input Modules ................... 1110 IACM ................. Slim Line AC Input Modules .................. 1118 IDC .................... Standard DC Input Modules ................... 1110 IDCM ................. Slim Line DC Input Modules .................. 1118 OAC ................... Standard AC Output Module .................. 1110 OACM ............... Slim Line AC Output Module ................. 1118 ODC .................. Standard DC Output Module .................. 1110 ODCM ............... Slim Line DC Output Module ................. 1118 SSR ................... Solid State Relay, Paired SCR Output .... 1104 SSRD ................. Dual Solid State Relay ............................ 1106 SSRQ ................. Quad Solid State Relay ........................... 1108 SSRT ................. Solid State Relay, Triac Output .............. 1102 Additional solid state relays are included in our CII high performance relay product line. For an overview of the CII product line, see section 14 of this databook. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1101 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B SSRT series "Hockey Puck" Solid State Relay With Snubberless Triac Output File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data * Standard "hockey puck" package. * Enhanced noise immunity (designed to meet level 3 requirements of European EMC Directive). * LED indicator. * Floating terminal design. * Low cost snubberless triac outputs. * 10A & 25A rms versions. * AC & DC input versions. * 4000V rms isolation. Form: 1 Form A (SPST-NO). Duty: Continuous. Isolation: 4000V rms minimum, input - output. Capacitance: 8.0 pf typical (input to output). Temperature Range: Storage: -40C to +100C Operating Temperature: -20C to + 80C Case Material: Plastic, UL rated 94V-0. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSRT -240 D 10 1. Basic Series: SSRT = "hockey puck" triac output solid state relay 2. Line Voltage: 240 = 24 - 280 VAC 3. Input Type & Voltage: A = 90 - 280 VAC linear D = 3 - 32 VDC constant current 4. Maximum Switching Rating: 10 = .1 - 10A rms, mounted to heatsink 25 = .1 - 25A rms, mounted to heatsink Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRT-240A10 SSRT-240A25 SSRT-240D10 SSRT-240D25 Input Specifications Parameter AC Input/AC Output DC Input/AC Output 90 - 280VAC 3 - 32VDC Must Operate Voltage VIN(OP) (Max.) 90VAC 3VDC Must Release Voltage V IN(REL) (Min.) 10VAC 1VDC Input Current (Max.) 8.5mA 14mA Control Voltage Range VIN Dimensions are shown for 1102 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Output Specification (@ 25C, unless otherwise specified) Conditions Load Voltage Range V L V rms Repetitive Blocking Voltage (Min.) V peak Load Current Range I L* Resistive Single Cycle Surge Current (Min.) Leakage Current (Off-State) (Max.) On-State Voltage Drop (Max.) SSRT-240A10 & SSRT-240D10 Units SSRT-240A25 & SSRT-240D25 24 - 280 + Parameter - 600 A rms .1 - 10 A peak 100 f = 60 Hz. VL = Nom. (120 or 240 V rms) mA rms I L = Max. V peak .1 - 25 250 .1 1.5 1.3 500 V/s Static dv/dt (Off-State) (Min.) Thermal Resistance, Junction to Case (R j-c) (Max.) C/W Turn-On Time (Max.) f = 60 Hz. 2.2 1.7 ms 8.3 for DC input types, 20 for AC input types 8.3 for DC input types, 30 for AC input types Turn-Off Time (Max.) f = 60 Hz. ms I2 t Rating Load Power Factor Rating t = 8.3 ms A 2 Sec. 41 240 0.5 - 1.0 I L = Max. *See Derating Curves Electrical Characteristics (Thermal Derating Curves) 25A Units 10A Units Heatsink Recommendations * We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module's base temperature at less than 85C under worst case ambient temperature and load conditions. * The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation. * An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module mounting surfaces and spread to a uniform depth of .002" to eliminate all air pockets. * The module should be mounted to the heatsink using two#10 screws. Operating Diagrams -4 CONSTANT CURRENT DC INPUT +3 1 ZERO VOLTAGE CIRCUIT OUTPUT + AC INPUT 3 2 EQUIVALENT CIRCUIT ONLY 1 4 EQUIVALENT CIRCUIT ONLY ZERO VOLTAGE CIRCUIT OUTPUT 2 Outline Dimensions 1.850 (47.0) 1.700 (43.18) LED INDICATOR .870 (22.1) .875 (22.23) 1.100 .470 (27.94) (11.9) 1.750 (44.45) 1.000 (25.4) 2.250 (57.15) Dimensions are shown for reference purposes only. .785 (19.94) Dimensions are in inches over (millimeters) unless otherwise specified. .250 (6.35) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1103 Catalog 1308242 Issued 3-03 P&B SSR series "Hockey Puck" Solid State Relay With Paired SCR Output File E81606 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data * Standard "hockey puck" package. * Enhanced noise immunity (designed to meet level 3 requirements of European EMC Directive). * LED indicator. * Inverse parallel SCR output. * 25, 50, & 125A rms versions. * 120/240VAC & 480VAC output types. * Zero voltage and random voltage turn-on versions. * AC & DC input versions. * 4,000V rms optical isolation. * Floating terminal design. Form: 1 Form A (SPST-NO). Duty: Continuous. Isolation: 4,000V rms minimum. Capacitance: 8 pf typical (input to output). Temperature Range: Storage: -40C to +100C Operating: -20C to +80C Case Material: Plastic, UL rated 94V-0. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSR -240 25 D 1. Basic Series: SSR = "hockey puck" inverse parallel SCR output solid state relay 2. Line Voltage: 240 = 24 - 240VAC 3. Input Type & Voltage: 480 = 48 - 660VAC A = 90 - 280VAC D = 3 - 32VDC 4. Maximum Switching Rating/Output: 25 = .1 - 25A rms, mounted to heatsink 50 = .1 - 50A rms, mounted to heatsink 125 = .1 - 125A rms, mounted to heatsink 5. Options: Leave Blank = Zero voltage turn-on R = Random voltage turn-on (phase controllable) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSR-240A25 SSR-240A50 SSR-240D25 SSR-240D25R SSR-240D50 SSR-480D125 Input Specifications DC Input AC Input Parameter Zero V Turn-on Units Zero and Random V Turn-on Units 90 - 280VAC 3 - 32VDC Must Operate Voltage VIN(OP) (Min.) 90VAC 3VDC Must Release Voltage V IN(REL) (Min.) 10VAC Input Current (Max.) 15mA Control Voltage Range V IN Dimensions are shown for 1104 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 1VDC 15mA Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Output Specifications (@ 25 C, unless otherwise specified) Parameter Nom. Line Voltage Conditions Units 120/240V Model 25A Models 50A Models 125A Models 24 - 280 480V Model V rms V rms 120/240 Model V peak 600 Load Current Range I L* 480V Model 120/240 & 480V Models V peak A rms .05 - 25 1200 .1 - 50 .1 - 125 Single Cycle Surge Current (Min.) 120/240 & 480V Models A peak 250 750 1,700 Load Voltage Range VL Repetitive Blocking Voltage (Min.) Leakage Current (Off-State) (Max.) Resistive 120/240V Model f = 60 Hz. VL = 240V rms 48 - 660 .1 mA rms 480V Model f = 60 Hz. VL = 480V rms .25 On-State Voltage Drop (Max.) 120/240 & 480V Models I L = Max. 1.35 Static dv/dt (Off-State) (Min.) 120/240 & 480V Models V/s Thermal Resistance, Junction to Case (R J-C) (Max.) 120/240 & 480V Models C/W 500 0.4 .15 0.25 ms 8.3 for Zero Voltage Turn-On DC input types, 20 for Zero Voltage Turn-On AC input types, 0.02 for Random Voltage Turn-On Models f = 60 Hz. ms 8.3 for DC input types, 30 for AC input types t = 8.3 ms A 2 Sec. Turn-On Time (Max.) 120/240 & 480V Models Turn-Off Time (Max.) 120/240 & 480V Models I 2 T Rating 120/240 & 480V Models Load Power Factor Rating 120/240 & 480V Models I L= Max. f = 60 Hz. 937 2,458 12,000 0.5 - 1.0 *See Derating Curves Electrical Characteristics (Thermal Derating Curves) 50A Units 25A Units 125A Units Heatsink Recommendations * We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module's base temperature at less than 85C under worst case ambient temperature and load conditions. * The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation. * An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module mounting surfaces and spread to a uniform depth of .002" to eliminate all air pockets. * The module should be mounted to the heatsink using two #10 screws. Operating Diagrams Outline Dimensions 1.850 (47.0) 1 -4 CONSTANT CURRENT DC INPUT +3 ZERO VOLTAGE CIRCUIT OUTPUT 1 ZERO VOLTAGE CIRCUIT OUTPUT Random Turn-on Units have a Random Turn-on circuit instead of Zero Voltage Circuit Dimensions are shown for reference purposes only. 1.100 .470 (27.94) (11.9) 1.750 (44.45) 1.000 (25.4) 2 EQUIVALENT CIRCUIT ONLY .870 (22.1) .875 (22.23) 4 3 LED INDICATOR 2 EQUIVALENT CIRCUIT ONLY AC INPUT 1.700 (43.18) Dimensions are in inches over (millimeters) unless otherwise specified. 2.250 (57.15) Specifications and availability subject to change. .785 (19.94) .250 (6.35) www.tycoelectronics.com Technical support: Refer to inside back cover. 1105 Catalog 1308242 Issued 3-03 P&B SSRD series Dual AC Output "Hockey Puck" Solid State Relay With Paired SCR Outputs File E81606 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data * Two independent AC output solid state relays in one standard package. * Enhanced noise immunity (designed to meet level 3 requirements of European EMC Directive). * Inverse parallel SCR outputs. * 25A rms & 40A rms versions available. * 4-15 VDC input control. * Zero voltage and random voltage turn-on versions. * 4000V rms optical isolation. * Quick connect style terminals. Form: 2 Form A (2 SPST-NO). Duty: Continuous. Isolation: 4000V rms input-to-output; 2500V rms input or output to ground. Capacitance: 8.0 pf typical (input to output). Temperature Range: Storage: -40C to +100C Operating: -40C to + 80C Case Material: Plastic, UL rated 94V-0. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSRD -240 D 25 1. Basic Series: SSRD = Dual output SSR - 2 SPST - NO 2. Line Voltage: 240 = 24-280 VAC 3. Input Type & Voltage: D = 4-15 VDC 4. Maximum Switching Rating/Output: 25 = .1-25A rms @ 25C, mounted to heatsink 40 = .1-40A rms @ 25C, mounted to heatsink 5. Options: Blank = Zero voltage turn-on (both outputs) R = Random voltage turn-on (both outputs) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRD-240D25 SSRD-240D40 Input Specifications Parameter Units Zero V Turn-on and Random V Turn-on Units Control Voltage Range VIN VDC 4-15 Must Operate Voltage VIN(OP) (Min.) VDC 3.75 Must Release Voltage V IN(REL) (Min.) VDC 1 Input Current (Max.) mA DC 34 Input Current (Min. for On-State) mA DC 7.5 Ohms 500 Input Resistance Dimensions are shown for 1106 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Output Specifications (@ 25 C, unless otherwise specified) Parameter Conditions Load Voltage Range V L Units f = 47 - 63 Hz. V rms Peak Voltage (Min.) t = 1 Min. V peak Load Current Range I L* Resistive A rms 25A Models 40A Models 24-280 550 0.1-25 0.1-40 Single Cycle Surge Current (Max.) A peak 500 780 One Second Surge Current (Max.) A peak 150 234 Leakage Current (Off-State) (Max.) V L = 280V rms mA rms I L = Max. V peak On-State Voltage Drop (Max.) Static dv/dt (Off-State) (Min.) 0.1 1.4 Thermal Resistance, Junction to Baseplate (R J-B ) (Max.) C/W Both Sections On Turn-On Time (Max.) 0.6 0.6 8.33 for Zero Voltage Turn-On Models <0.1 for Random Voltage Turn-On Models ms f = 60 Hz. 1.3 500 V/s Turn-Off Time (Max.) f = 60 Hz. ms I 2 t Rating t = 8.3 ms A 2 Sec. 8.33 Load Power Factor Rating I L = Max. 1,041 2,435 0.5 - 1.0 *See Derating Curves Electrical Characteristics (Thermal Derating Curves) 40A Units 25A Units 80.0 40.0 30.0 0.7C/W 1.0C/W 1.5C/W 2.0C/W 20.0 10.0 60.0 50.0 40.0 0.5C/W 30.0 1.0C/W 1.5C/W 2.0C/W 20.0 10.0 20 25 30 35 40 45 50 55 60 65 70 75 80 Ambient Temperature (C) Ambient Temperature (C) Operating Diagram Heatsink Recommendations + A1 ZERO VOLTAGE CIRCUIT Output A - + A2 B1 ZERO VOLTAGE CIRCUIT Control B VDC Input 70.0 0.0 0.0 20 25 30 35 40 45 50 55 60 65 70 75 80 Control A VDC Input Max. Load Current (Amps) Both Outputs ON Max. Load Current (Amps) Both Outputs ON 50.0 Output B - B2 Random Turn-on Units have a Random Turn-on circuit instead of Zero Voltage Circuit * We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module's base temperature at less than 85C under worst case ambient temperature and load conditions. * The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation. * An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module mounting surfaces and spread to a uniform depth of .002" to eliminate all air pockets. * The module should be mounted to the heatsink using two #10 screws. Outline Dimensions 2.250 (57.15) 3 X .100 (2.54) 1.88 (47.75) - + INPUT A + - 4 X .250 (6.35) 1.15 (29.21) Dimensions are shown for reference purposes only. AMP P/N: 103976-3 or 640440-4 Methode P/N: 1300-004-422 1.18 (30.0) 1.01 1.750 (25.65) (44.45) INPUT B 4 X .025 (0.64) Input Terminal Connectors are available from several different manufacturers. .37 (9.4) Tolerance: .035 (0.88) Consult your local distributor for these or equivalent connectors. .89 (22.6) 1.26 (32.0) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1107 Catalog 1308242 Issued 3-03 P&B SSRQ series Quad AC Output "Hockey Puck" Solid State Relay With Triac Outputs File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data * Four independent AC output solid state relays in one standard package. * 20A rms triac outputs. * 4-15 VDC input control. * Zero voltage and random voltage turn-on versions. * 2500V rms optical isolation. * Quick connect style terminals. Form: 4 Form A (4 SPST-NO). Duty: Continuous. Isolation: 2500V rms input-to-output-to-ground. Capacitance: 10.0 pf maximum (input to output). Temperature Range: Storage: -40C to +125C Operating: -40C to + 80C Case Material: Plastic, UL rated 94V-0. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSRQ -240 D 20 1. Basic Series: SSRQ = Quad output SSR - 4 SPST - NO 2. Line Voltage: 240 = 24 - 280 VAC 3. Input Type & Voltage: D = 4 - 15VDC, zero voltage turn-on types. R = 4 - 15VDC, random voltage turn-on types. 4. Maximum Switching Rating/Output: 20 = .05 - 20A rms, mounted to heatsink. NOTE: 60A max. per package. 5. Options: Blank = Zero voltage turn-on (all sections) Requires "D" input type above. R = Random voltage turn-on (all sections) Requires "R" input type above. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRQ-240D20 Input Specifications Conditions Units Zero V or Random V Turn-on Units Control Voltage Range V IN @ 25C VDC 4-15 Must Operate Voltage VIN(OP) (Min.) Must Release Voltage V IN(REL)(Min.) @ 25C @ 25C VDC VDC 4 1 Input Current (Typ.) @ 25C mA DC 12 Input Impedance (Nom.) @ 25C ohms 330 Parameter Dimensions are shown for 1108 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Output Specifications (@ 25 C, unless otherwise specified) Parameter Conditions Units Load Voltage Range V L V rms Repetitive Blocking Voltage (Min.) V peak + A rms .15-20 A peak 250 Load Current Range I L* Resistive Single Cycle Surge Current (Min.) Leakage Current (Off-State) (Max.) mA rms 10 I L = Max. V peak 1.6 200 Static dv/dt (Off-State) (Min.) J-C) - 600 f = 60 Hz. VL = 280Vrms On-State Voltage Drop (Max.) Thermal Resistance, Junction to Case (R Turn-On Time (Max.) 24-280 (Max.) V L = 280Vrms V/s All Sections On f = 60 Hz. C/W ms Turn-Off Time (Max.) 2 I t Rating 1.2 8.3 for Zero Voltage Turn-On Models 0.1 for Random Voltage Turn-On Models 8.3 f = 60 Hz. ms t = 8.3 ms A2 Sec. Load Power Factor Rating 260 0.5 - 1.0 I L = Max. *See Thermal Derating Curves. Note: While each output section is rated for a maximum of 20A, the maximum output per package is 60A. Electrical Characteristics (Thermal Derating Curves) How To Use These Curves Example #1: 75 /W 80 0. 60 5 C/ 1 90 W C/W 40 2C /W 20 105 3C/W 0 Given: IL = Four 7.5A loads @ 60C Find: Minimum heatsink required Solution: From Thermal Dissipation Graph 4 x 7.5A = 30A 4 sections ON Heatsink = 2C/W minimum Max. Allowable Base Temperature (C) 5C 0.2 Power Dissipation (Watts) Knowing maximum load current and maximum ambient temperature, use derating curves to determine required heat sink and maximum allowable base plate temperature. On left hand power dissipation curve, locate the point corresponding to maximum load current. Extend a line to the right from that point to the intersection of vertical line on right hand chart corresponding to maximum ambient temperature. From heat sink curve, read directly or extrapolate required heat sink size. Extend the line farther to the right and read on the right hand scale the maximum allowable base plate temperature. Example #2: Given: SSRQ24020 Find: Maximum rating mounting to 1.0C/W HS @ 60C All sections ON Solution: From Thermal Dissipation Graph Rating mounted to 1.0C/W HS @ 60C = 36A total 9A for 4 Sections ON = 36A total 12A for 3 Sections ON = 36A total 15 30 45 60 0 20 40 60 80 Loads Current (A rms) Ambient Temp. (C) Operating Diagram Heatsink Recommendations B1 A1 ZERO VOLTAGE CIRCUIT ZERO VOLTAGE CIRCUIT OUTPUT B OUTPUT A B2 A2 -(B) -(D) D1 ZERO VOLTAGE CIRCUIT OUTPUT D D2 -(A) + COMMON -(C) C1 ZERO VOLTAGE CIRCUIT OUTPUT C EQUIVALENT CIRCUIT ONLY Random Turn-On Units Have A Random Turn-On Circuit Instead Of A Zero Voltage Circuit C2 * We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module's base temperature at less than 85C under worst case ambient temperature and load conditions. * The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation. * An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module mounting surfaces and spread to a uniform depth of .002" to eliminate all air pockets. * The module should be mounted to the heatsink using two #10 screws. Outline Dimensions MTNG HOLE / SLOT 2 PLCS. .170 (4.3) DIA. A1 A1 1.87 (47.5) 2.3 (58.4) A2 C1 Input Terminals mate with the following connectors or equivalent: 1.125 (28.57) C2 - DC SEC. C AMP P/N: 103976-4 + DC COMM Consult your local distributor for connectors. DC SEC. A - DC SEC. B - - DC SEC. D B1 B2 D1 1.75 (44.45) Dimensions are shown for reference purposes only. D2 .025 (.635) SQ. PINS ON .100 (2.54) CENTERS .250 (6.35) Q.C. TERMS 8 PLACES .375 (9.5) Dimensions are in inches over (millimeters) unless otherwise specified. .85 (21.6) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1109 Catalog 1308242 Issued 3-03 P&B IAC/OAC IDC/ODC Input/Output Modules File E81606 & E29244 File LR38595M77 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data (all I/O modules) * Industry standard package and pin-out. * Color coded by function. * 4,000V rms optical isolation. * High immunity to false operation. * Series compatible. * Output modules can be controlled from sinking or sourcing logic. * Compatible with 2IO series mounting boards. Switch Form: 1 Form A (SPST-NO) Duty: Continuous. Isolation: 4,000V rms, 60 Hz. Capacitance: 8 pF Typical (input to output). Operating Temperature: -30C to +80C. Storage Temperature: -40C to +85C. Potting Compound Flammability: UL94V-0. Approximate Weight: 1.38 oz. (35g). Ordering Information Typical Part Number B OAC -5 H 1. Basic Series: IAC = AC input module - yellow case IDC = DC input module - white case OAC = AC output module - black case ODC = DC output module - red case 2. Input or Logic Voltage: 5 = 5VDC 15 = 15VDC 24 = 24VDC 3. Options: Blank = IAC Type IDC Type OAC Type ODC Type -- -- -- -- 120VAC/VDC input (90-140VAC/VDC) * * 3.3-32VDC input * * 3A, 24-280VAC, zero voltage turn-on output 3A, 3-60VDC output 240VAC/VDC input (180-280VAC/VDC) * * 3A, 24-280VAC, zero voltage turn-on output 1A, 3-250VDC output 10-60VDC input * * A = IAC Type OAC Type ODC Type IDC Type -- -- -- -- E = IAC Type -- 18-36VAC/VDC input * * F = IDC Type -- 4-32VDC input & fast turn-on & turn-off times * * H = OAC Type -- 5A, 24-280VAC, zero voltage turn-on output R = OAC Type -- 5A, 12-280VAC, random voltage turn-on output * * Is not polarity sensitive. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. IAC-5 IAC-5A IAC-5E IAC-15 IAC-24 IDC-5 IDC-24 OAC-5 OAC-5A OAC-5H OAC-15 OAC-24 Dimensions are shown for 1110 reference purposes only. OAC-24A ODC-5 ODC-5A ODC-15 ODC-15A ODC-24 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B IAC AC Input Modules Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Max. Input Current Input Resistance Conditions @VIN=Max. Units VAC/VDC VAC/VDC VAC/VDC mA Ohms IAC-5 IAC-15 IAC-24 Min. Typ. 90 120 IAC-5A IAC-15A IAC-24A Min. Typ. Max. 180 240 280 180 20 6 75K IAC-5E IAC-15E IAC-24E Min. Typ. Max. 18 24 36 18 3 18 2K Normally Open(SINKING) IAC-15 IAC-15A IAC-15E Min. Typ. Max. 30 50 10 .2 12 15 18 18 20 30 Normally Open (SINKING) IAC-24 IAC-24A IAC-24E Min. Typ. Max. 30 50 10 .2 20 24 30 18 20 30 Normally Open(SINKING) OAC-5 OAC-5A OAC-5H OAC-5R Min. Typ. Max. 3 5 8 3 1 20 220 OAC-15 OAC-15A OAC-15H OAC-15R Min. Typ. Max. 9 15 18 9 1 16 1000 OAC-24 OAC-24A OAC-24H OAC-24R Min. Typ. Max. 18 24 32 18 1 13 2000 OAC-5H IAC-15H OAC-24H OAC-5R OAC-15R OAC-24R Max. 140 90 20 6 28K Output Specifications (@ +25C unless otherwise specified) Parameter Maximum Output Voltage Maximum Output Current Maximum Output Leakage Current Maximum Output Voltage Drop Logic Supply Voltage VCC Logic Supply Current Turn-On Time (Nominal) Turn-Off Time (Nominal) Output Type (Open Collector) Conditions VOUT=Max. ISINK=50mA VCC=Max. ISINK=25mA ISINK=25mA Units VDC mADC ADC VDC VDC mADC ms ms IAC-5 IAC-5A IAC-5E Min. Typ. 3 5 Max. 30 50 10 .2 6 18 20 30 OAC AC Output Modules Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Maximum Input Current Input Resistance RIN Conditions @VIN=Nominal Units VDC VDC VDC mADC Ohms PIN-3 must be positive with respect to PIN-4 for correct operation. Output Specifications (47 to 63 Hz.,@ +25C unless otherwise specified) Parameter Load Voltage VL Repetitive Blocking Voltage Load Current IL* Ouput Current Derating Single Cycle surge Current Leakage Current (Off-State) @ 60 Hz. On-State Voltage Drop Static dv.dt (Off-State) Turn-On Time Turn-Off Time Output Type (Form) H/P/ Rating @ 240VAC Dimensions are shown for reference purposes only. Conditions VL=120VAC VL=240VAC IL=Max. @f=60 Hz. Units V rms V peak A rms mA/C A peak mA rms mA rms V peak V/s ms ms Dimensions are in inches over (millimeters) unless otherwise specified. OAC-5 OAC-5A OAC-15 OAC-15A OAC-24 OAC-24A Min. Typ. Max. 24 120/240 280 600 .05 3 58mA/C 40C - 80C 100 1 2 1.6 200 8.3 8.3 Normally Open 1A 1/4HP Specifications and availability subject to change. Min. Typ. 24 120/240 .05 Max. 280 600 5 66mA/C 30C - 80C 250 1 2 1.6 200 8.3 8.3 Normally Open 1A 1/2HP Min. Typ. 24 120/240 .05 Max. 280 600 5 66mA/C 30C - 80C 250 1 2 1.6 200 .1 8.3 Normally Open 1A 1/2HP www.tycoelectronics.com Technical support: Refer to inside back cover. 1111 Catalog 1308242 Issued 3-03 P&B IDC DC Input Modules Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Maximum Input Current Input Resistance Conditions Units VDC VDC VDC mA Ohms @ VIN=Max. IDC-5 IDC-15 IDC-24 Min. Typ. 3.3 24 Max. 32 3.3 2 34 1K IDC-5A IDC-15A IDC-24A Min. Typ. Max. 10 60 10 3 34 2K IDC-5F IDC-15F IDC-24F Min. Typ. Max. 4 32 4 1 68 500 Output Specifications (@ +25C unless otherwise specified) Parameter Maximum Output Voltage Maximum Output Current Maximum Output Leakage Current Maximum Output Voltage Drop Logic Supply Voltage VCC Logic Supply Current Turn-On Time (Nominal) Turn-Off Time (Nominal) Output Type (Open Collector) Conditions VOUT=Max. ISINK=50mA VCC=Max. ISINK=25mA ISINK=25mA Units VDC mADC ADC VDC VDC mADC ms ms IDC-5 IDC-5A IDC-15 IDC-15A IDC-24 IDC-24A IDC-5F IDC-15F IDC-24F Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max 30 30 30 30 30 30 50 50 50 50 50 50 10 10 10 10 10 10 .2 .2 .2 .2 .2 .2 3 5 6 12 15 18 20 24 30 3 5 6 12 15 18 20 24 30 18 18 18 18 18 18 1* 1* 1* .05 .05 .05 1* 1* 1* .10 .10 .10 Normally Open Normally Open Normally Open Normally Open Normally Open Normally Open (SINKING) (SINKING) (SINKING) (SINKING) (SINKING) (SINKING) * Nominal Turn-On and Turn-Off times for IDC5A, IDC15A & IDC24A are 5 ms. ODC DC Output Modules Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Maximum Input Current Input Resistance RIN Conditions @ VIN=Nominal Units VDC VDC VDC mADC Ohms ODC-5 ODC-5A Min. Typ. Max. 3 5 8 3 1 18 250 ODC-15 ODC-15A Min. Typ. Max. 9 15 18 9 1 16 1000 ODC-24 ODC-24A Min. Typ. Max. 18 24 32 18 1 13 2000 PIN-3 must be positive with respect to PIN-4 for correct operation. Output Specifications (@ +25C unless otherwise specified) Parameter Load Voltage VL Load Current IL Maximum Surge Current for 1 Second Maximum Leakage Current (Off-State) Maximum On-State Voltage Drop MaximumTurn-On Time MaximumTurn-Off Time Conditions VL=MAX IL=MAX Units VDC ADC ADC ADC VDC ms ms Min. 3 .01 ODC-5 ODC-24 ODC-15 Typ. Max. 60 3 5 500 1.5 .1 .75 Min. 3 .01 ODC-5A ODC-24A ODC-15A Typ. Max. 250 1 5 2000 1.5 .1 .75 At 40C, derate by 50mA/Cto 80C. PIN-1 must be positive with respect to PIN-2 for correct operation. Dimensions are shown for 1112 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B OAC Operating Diagram IAC Operating Diagram 1 1 INPUT ZERO OR RANDOM VOLTAGE CIRCUIT OUTPUT 2 +VCC 3 OUTPUT 4 COMMON 5 2 R IN + INPUT - SCHMIDT TRIGGER 3 4 EQUIVALENT CIRCUIT ONLY EQUIVALENT CIRCUIT ONLY ODC Operating Diagram IDC Operating Diagram + + + 1 INPUT 1 OUTPUT 2 - 2 AMPLIFIER + +VCC 3 OUTPUT 4 COMMON 5 + 3 INPUT - 4 SCHMIDT TRIGGER + RC EQUIVALENT CIRCUIT ONLY EQUIVALENT CIRCUIT ONLY Outline Dimensions 1.25 (38.10) 0.6 (15.2) .30 (7.62) .270 (6.85 ) 0.1 (2.54) 1 0.3 (7.62) 1.0 (25.4) 2 0.7 (17.8) 1.2 (30.5) 1.4 (35.6) 1.6 (40.6) 3 CAPTIVE #4-40 PHILLIPS HEAD HOLD DOWN SCREW 5 4 1.7 (43.18) 1.0 (25.4) .042 DIA.TYP. (1.067 ) Note: Pin 5 is not present on Output Modules. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1113 Catalog 1308242 Issued 3-03 P&B 2IO series Mounting Boards for Input/Output Modules * LED status indicators, plug-in fuses & pull-up resistors * Card edge logic connections (2IO8, 2IO16 & 2IO24) * Screw terminal logic connections (2IO4A, 2IO4B, 2IO4C, 2IO16A, 2IO16B & 2IO16C) * Screw terminals for field wiring * UL recognized/CSA certified for 125V max. with 5A fuses; 250V max. with #22 solid copper jumper wire instead of fuses File E61482 File LR15734-93 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Ordering Information - Boldface items listed below are more likely to be maintained in stock by authorized distributors. Part Number Number of I/O Channels Number of Module Positions Field Terminals: Screw Terminals Logic Terminals: Screw Terminals Logic Terminals: 26-pin card edge connector Logic Terminals: 50-pin card edge connector Designed for neg. true logic; one logic voltage Designed for neg. or pos. true logic; mult. logic voltages Designed for neg. true logic; mult. logic voltages 2IO4A 4 4 X X X X 2IO16B 16 16 X X 2IO16C 16 16 X X 2IO24 24 24 X X X X X X 26-pin card edge connector 50-pin card edge connector 5 amp fuse 1 amp fuse** Thomas & Betts 622-2615* Thomas & Betts 622-5015* Littelfuse 251-005* Littelfuse 251-001* 9 8 7 6 5 4 3 2 1 * Or equivalent ** Used on 2IO24 only. SIGNAL BARRIER BLOCK 2IO4B Schematic Designed to operate with either neg. or pos. true logic (active low or high) systems & different logic voltages. (output modules only - input modules must be used in negative logic systems only.) FIELD INPUT/OUTPUT SIDE IS IDENTICAL TO 2104A 4.00 (101.6) 0.25 (6.35) X X X 2IO16A 16 16 X X Mating Connectors and Fuses PULL-UP RESISTOR 3.3k 1 2 3 4 5 6 7 8 9 2IO16 16 16 X X FUSE 5 AMP LED STATUS INDICATOR 2IO8 8 8 X X POWER BARRIER BLOCK 9 TERMINAL 2 PLACES 3.00 (76.20) 2IO4C 4 4 X X X 2IO4A, 2IO4B & 2IO4C Outline Dimensions 3.50 (88.90) 2IO4B 4 4 X X 3 4 5 4.50 (114.3) PULL-UP RESISTOR 3.3k TYPICAL 2.20 MAX. TO TOP (55.8) OF MODULES 0.75 (19.05) RIVETED STANDOFF THRU HOLE .150 DIA. (3.81) 4 PLACES LOGIC GND. 1 2 3 4 5 6 7 LED BARRIER STRIP 8 9 2IO4A Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. FIELD INPUT/OUTPUT SPARE 1 2 3 4 5 6 8 7 9 BARRIER STRIP LOGIC INPUT/OUTPUT 2IO4C Schematic Designed to operate with neg. true logic (active low) systems & different logic voltages. FUSE 5 AMP TYP. FIELD INPUT/OUTPUT SIDE IS IDENTICAL TO 2104A 1 2 3 4 5 3 4 5 PULL-UP RESISTOR 3.3k TYPICAL PULL-UP RESISTOR 3.3k TYPICAL LED LED LOGIC GND. 1 2 3 4 5 6 8 9 7 BARRIER STRIP + LOGIC + LOGIC 1 2 3 4 5 6 7 8 9 BARRIER STRIP LOGIC INPUT/OUTPUT LOGIC INPUT/OUTPUT Dimensions are shown for 1114 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 2IO8 Outline Dimensions BARRIER STRIP 2 TERMINAL LOGIC SUPPLY INPUT + 1.40 (35.56) KEY SLOT 2.60 (66.04) BARRIER STRIP 16 TERMINAL 16 15 14 13 12 1110 9 8 7 6 5 4 3 2 1 PIN 49/25 FUSE 5 AMP 3.00 (76.20) 0.39 (7.62) 0 0.45 (11.43) 1 2 3 4 6 PULL-UP RESISTOR 3.3k 7 7.5 (190.5) 8.00 (203.2) 0.40 (10.16) 5 3.50 (88.90) 0.25 (6.35) 2.20 MAX TO TOP (55.8) OF MODULES 0.75 (19.05) RIVETED STANDOFF THRU HOLE .150 DIA. 4 PLACES (3.81) LED STATUS INDICATOR 2IO8 Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. FIELD INPUT/OUTPUT BARRIER STRIP LOGIC INPUT/OUTPUT + EDGE CONN. BOT. LOGIC GND. ALL EVEN PINS TOP 25 +LOGIC 49 47 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 3 4 5 PULL-UP RESISTOR 3.3k TYPICAL 21 19 17 15 13 11 9 1 45 43 41 39 37 35 33 25 1 FUSE 5 AMP TYP. 1 50 OR 26 PIN PIN CONN. CONN. LED USER INSTALLABLE JUMPER 2 (PLCS) 2IO16 Outline Dimensions BARRIER STRIP 2 TERMINAL LOGIC SUPPLY INPUT - + 3.50 (88.90) 2.60 (66.04) KEY SLOT 13 11 1 0.45 (11.43) LED STATUS INDICATOR BARRIER STRIP 16 TERMINAL 2 PLACES 14.05 (356.87) 0.25 (6.35) 3231302928272625242322 2120191817 16151413121110 9 8 7 6 5 4 3 2 1 0.40 (10.16) 0 1 2 3 4 5 6 7 8 9 10 EDGE CARD IS ARRANGED TO ACCOMMODATE 50 CONTACT 0.1" (3mm) CENTER CARD EDGE CONNECTOR 11 12 13 14 15 PULL-UP RESISTOR 3.3k 1.40 (35.56) FUSE 5 AMP 1.60 (40.64) 0.25 (6.35) 0.75 (19.05) 2.20 MAX. TO TOP (55.8) OF MODULES 6.25 (158.75) 7.30 (185.42) NYLON STANDOFF RIVETED STANDOFF THRU HOLE 150 DIA. 4 PLACES (3.81) 2IO16 Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. FIELD INPUT/OUTPUT BARRIER STRIPS + LOGIC INPUT/OUTPUT EDGE CONN. BOT. LOGIC ALL GND. EVEN PINS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 FUSE 5 AMP TYP. 1 2 3 4 5 TOP + LOGIC 1 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 PULL-UP RESISTOR 3.3k TYPICAL LED Dimensions are shown for reference purposes only. USER INSTALLABLE JUMPER (2 PLACES) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1115 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 2IO16A, 2IO16B & 2IO16C Outline Dimensions BARRIER STRIP 16 TERMINAL 4 PLACES 0.25 (6.35) POWER 14.05 (356.87) 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 3.50 (88.90) LED STATUS INDICATOR +- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1.40 (35.56) 1.60 (40.64) FUSE 5 AMP PULL-UP RESISTOR 3.3k 0.25 (6.35) SIGNAL BARRIER STRIP 2 TERMINAL LOGIC SUPPLY INPUT 0.75 (19.05) 7.30 (185.42) 2.20 MAX. TO TOP (55.8) OF MODULES 6.25 (158.75) NYLON STANDOFF RIVETED STANDOFF THRU HOLE 150 DIA. (3.81) 4 PLACES 2IO16A Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. FIELD INPUT/OUTPUT BARRIER STRIP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 FUSE 5 AMP TYP. 1 2 3 4 5 PULL-UP RESISTOR 3.3k TYPICAL LED BARRIER STRIP + LOGIC LOGIC GND. + - 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 LOGIC INPUT/OUTPUT 2IO16B Schematic Designed to operate with either neg. or pos. true logic (active low or high) systems & different logic voltages. (Note above applies to output modules only. Input modules must be use in negative logic systems only.) FIELD INPUT/OUTPUT SIDE IS IDENTICAL TO 21016A 3 4 5 PULL-UP RESISTOR 3.3k TYPICAL LED BARRIER STRIP + LOGIC LOGIC GND. + - 1 2 Dimensions are shown for 1116 reference purposes only. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 2728 29 30 31 32 LOGIC INPUT/OUTPUT Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 2IO16C Schematic Designed to operate with neg. true logic (active low) systems & different logic voltages. FIELD INPUT/OUTPUT SIDE IS IDENTICAL TO 21016A 3 4 5 PULL-UP RESISTOR 3.3k TYPICAL LED BARRIER STRIP + LOGIC LOGIC GND. + - 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 LOGIC INPUT/OUTPUT 2IO24 Outline Dimensions 18.75 (476.25) BARRIER STRIP 16 TERMINAL 3 PLACES 5.50 (139.70) 16.50 (419.10) 11.00 (279.40) 1.13 (28.58) 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 4.50 (114.30) FUSE 5 AMP 4.00 (101.60) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 26 28 1 0 - + CUSTOMER FUSE OPTION BARRIER STRIP 1 MAP 2 TERMINAL 2 1.00 LOGIC SUPPLY INPUT (25.4) 2 PLACES 1 KEY SLOT 0.40 (10.16) PULL-UP RESISTOR 3.3k 2.60 (66.04) 0.25 (6.35) 8.06 (204.72) 0.75 (19.05) 2.20 MAX. TO TOP (55.8) OF MODULES Notes 2 1 EDGE CARD IS ARRANGED TO ACCOMMODATE 50 CONTACT, 0.1" (3mm) CENTER, CARD EDGE CONNECTOR + LOGIC AVAILABLE AT PIN 49 BY RELOCATING FUSE LED STATUS INDICATOR RIVETED STANDOFF THRU HOLE 150 DIA. 8 PLACES (3.81) 2IO24 Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER STRIPS LOGIC INPUT/OUTPUT FUSE 1 AMP + EDGE CONN. BOT. LOGIC ALL GND. EVEN PINS TOP + LOGIC FIELD INPUT/OUTPUT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 FUSE 5 AMP TYP. 1 2 3 4 5 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 USER INSTALLABLE JUMPER OR FUSE Dimensions are shown for reference purposes only. PULL-UP RESISTOR 3.3k TYPICAL Dimensions are in inches over (millimeters) unless otherwise specified. LED STATUS INDICATOR Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1117 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B IACM/OACM IDCM/ODCM Slim Line Input/Output Modules File E81606 & E29244 File LR38595M77 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data (all I/O modules) * Slim line .4" (10.16mm) thick package. * Foot print same as .6" (15.24mm) thick package. * 4,000V rms optical isolation. * Color coded by function. * High immunity to false operation. * Series compatible. * Output modules can be controlled from sinking or sourcing logic. * Compatible with 2IOM series mounting boards. Switch Form: 1 Form A (SPST-NO) Duty: Continuous. Capacitance: 8 pF Typical (input to output). Operating Temperature: -30C to +80C. Storage Temperature: -40C to +85C. Potting Compound Flammability: UL94V-0. Solderability: 260C for 5 seconds, maximum. Approximate Weight: .87 oz. (22.1g). Ordering Information Typical Part Number B OACM -5 H 1. Basic Series: IACM = Slim line AC input module -- yellow case IDCM = Slim line DC input module -- white case OACM = Slim line AC output module -- black case ODCM = Slim line DC output module -- red case 2. Input or Logic Voltage: 5 = 5VDC 15 = 15VDC 24 = 24VDC U = OACM & ODCM Types 3-15VDC input voltage 3. Options: Blank = IACM Type -- IDCM Type -- OACM Type -- ODCM Type -- 120VAC/VDC input (90-140VAC/VDC) * *<None> 3.3-32VDC input * * 3A, 24-280VAC, zero voltage turn-on output 3A, 3-60VDC output A = IACM Type -- IDCM Type -- OACM Type -- ODCM Type -- 240VAC/VDC input (180-280VAC/VDC) * * 10-60VDC input * * 3A, 24-280VAC 1A, 5-250VDC output E = IACM Type -- 18-36VAC/VDC input * * F = IDCM Type -- 4-32VDC input & fast turn-on & turn-off times * * H = OACM Type -- 5A, 24-280VAC, zero voltage turn-on output * * Is not polarity sensitive. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. IACM-5 IACM-5A IDCM-5 OACM-5 OACM-5H OACM-U OACM-UH ODCM-5 Dimensions are shown for 1118 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B IACM AC Input Modules Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Max. Input Current Input Resistance RIN Conditions @ VIN=Max. Units VAC/VDC VAC/VDC VAC/VDC mA Ohms IACM-5 IACM-15 IACM-24 Min. Typ. Max. 90 120 140 90 20 6 28K IACM-5A IACM-15A IACM-24A Min. Typ. Max. 180 240 280 180 20 6 75K IACM-5E IACM-15E IACM-24E Min. Typ. Max. 18 24 36 18 3 18 2K IACM-5 IACM-5A IACM-5E Min. Typ. Max. 30 50 10 .2 3 5 6 18 20 30 Normally Open IACM-15 IACM-15A IACM-15E Min. Typ. Max. 30 50 10 .2 12 15 18 18 20 30 Normally Open IACM-24 IACM-24A IACM-24E Min. Typ. Max. 30 50 10 .2 20 24 30 18 20 30 Normally Open Output Specifications (@ +25C unless otherwise specified) Parameter Maximum Output Voltage Maximum Output Current ISINK Maximum Output Leakage Current Maximum Output Voltage Drop Logic Supply Voltage VCC Maximum Logic Supply Current Turn-On Time (Nominal) Turn-Off Time (Nominal) Output Type (Open Collector) Conditions VOUT=Max. ISINK=50mA VCC=Max. ISINK=25mA ISINK=25mA Units VDC mADC ADC VDC VDC mADC ms ms (Sinking) (Sinking) (Sinking) OACM AC Output Modules Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Input Current Input Resistance RIN Conditions @VIN=Nominal Units VDC VDC VDC mADC Ohms OACM-5 OACM-5H OACM-5R Min. Typ. Max. 3 5 8 3 1 20 220 OACM-15 OACM-15H OACM-15R Min. Typ. Max. 9 15 18 9 1 16 1000 OACM-24 OACM-24H OACM-24R Min. Typ. Max 18 24 32 18 1 13 2000 OACM-U OACM-UH OACM-UH .Min. Typ. Max. 3 5 15 3 1 44 360 PIN-3 must be positive with respect to PIN-4 for correct operation. Output Specifications (47 to 63 Hz.,@ +25C unless otherwise specified) Parameter Load Voltage VL Repetitive Blocking Voltage Load Current IL* Output Current Derating Single Cycle Surge Current Leakage Current (Off-State) On-State Voltage Drop Static dv.dt (Off-State) Turn-On Time Turn-Off Time H/P/ Rating Dimensions are shown for reference purposes only. Conditions VL=120VAC VL=240VAC IL=Max. @ f=60 Hz. @ 240VAC Units V rms V peak A rms mA/C A peak mA rms mA rms V peak V/s ms ms HP Dimensions are in inches over (millimeters) unless otherwise specified. OACM-5 OACM-15 OACM-24 OACM-U Min. Typ. Max. 24 120/240 280 600 .05 3 58mA/C 40C - 80C 100 1 2 1.6 200 8.3 8.3 1/4 OACM-5H IAC-15H OAC-24H OACM-UH Min. Typ. Max. 24 120/240 280 600 .05 5 66mA/C 30C - 80C 250 1 2 1.6 200 8.3 8.3 1/2 Specifications and availability subject to change. OACM-5R OACM-15R OACM-24R OACM-UR Min. Typ. Max. 24 120/240 280 600 .05 5 66mA/C 30C - 80C 250 1 2 1.6 200 .1 8.3 1/2 www.tycoelectronics.com Technical support: Refer to inside back cover. 1119 Catalog 1308242 Issued 3-03 P&B IDCM DC Input Modules Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Maximum Input Current Input Resistance RIN Conditions @VIN=Max. Units VDC VDC VDC mA Ohms IDCM-5 IDCM-15 IDCM-24 Min. Typ. Max. 3.3 24 32 3.3 2 34 1000 IDCM-5A IDCM-15A IDCM-24A Min. Typ. Max. 10 60 10 3 34 2000 IDCM-5F IDCM-15F IDCM-24F Min. Typ. Max. 4 32 4 1 68 500 Output Specifications (@ +25C unless otherwise specified) Parameter Maximum Output Voltage Maximum Output Current Maximum Output Leakage Current Maximum Output Voltage Drop Logic Supply Voltage VCC Logic Supply Current Turn-On Time (Nominal) Turn-Off Time (Nominal) Output Type (Open Collector) Conditions VOUT=Max. ISINK=50mA VCC=Max. ISINK=25mA ISINK=25mA Units VDC mADC ADC VDC VDC mADC ms ms IDCM-5 IDCM-15 IDCM-24 IDCM-24 IDCM-5A IDCM-15A IDCM-24A IDCM-5F IDCM-15F IDCM-24F Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max 30 30 30 30 30 30 50 50 50 50 50 50 10 10 10 10 10 10 .2 .2 .2 .2 .2 .2 3 5 6 12 15 18 20 24 30 3 5 6 12 15 18 20 24 30 18 18 18 18 18 18 1* 1* 1* .05 .05 .05 1* 1* 1* .10 .10 .10 Normally Open Normally Open Normally Open Normally Open Normally Open Normally Open (SINKING) (SINKING) (SINKING) (SINKING) (SINKING) (SINKING) * Nominal Turn-On and Turn-Off times for IDCM5A, IDCM15A & IDCM24A are 5 ms. ODCM DC Output Modules Input Specifications Parameter Control Voltage Range VIN Must Operate Voltage VIN(OP) Must Release Voltage VIN(REL) Maximum Input Current Input Resistance RIN Conditions @VIN=Nominal Units VDC VDC VDC mADC Ohms ODCM-5 ODCM-5A Min. Typ. Max. 3 5 8 3 1 18 250 ODCM-15 ODCM-15A Min. Typ. Max. 9 15 18 9 1 16 1000 ODCM-24 ODCM-24A Min. Typ. Max. 18 24 32 18 1 13 2000 ODCM-U ODCM-UA Min. Typ. Max. 3 5 15 3 1 44 360 PIN-3 must be positive with respect to PIN-4 for correct operation. Output Specifications (@ +25C unless otherwise specified) Parameter Load Voltage VL Load Current IL* Maximum Surge Current for 1 Second Maximum Leakage Current (Off-State) Maximum On-State Voltage Drop MaximumTurn-On Time MaximumTurn-Off Time Conditions VL=MAX IL=MAX Units VDC ADC ADC ADC VDC ms ms Min. 3 .01 ODCM-5 ODCM-15 ODCM-24 ODCM-U Typ. Max. 60 3 5 500 1.5 .1 .75 ODCM-5A ODCM-15A ODCM-24A ODCM-UA Min. Typ. Max. 3 250 .01 1 5 2000 1.5 .1 .75 * Above 40C, derate by 50mA/C to 80C. PIN-1 must be positive with respect to PIN-2 for correct operation. Dimensions are shown for 1120 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 IACM Operating Diagram P&B OACM Operating Diagram 1 1 INPUT ZERO OR RANDOM VOLTAGE CIRCUIT OUTPUT 2 +VCC 3 OUTPUT 4 COMMON 5 2 R IN + INPUT - SCHMIDT TRIGGER 3 4 EQUIVALENT CIRCUIT ONLY EQUIVALENT CIRCUIT ONLY ODCM Operating Diagram IDCM Operating Diagram + + + 1 INPUT 1 OUTPUT - 2 2 AMPLIFIER + +VCC + 3 INPUT - 4 3 OUTPUT 4 COMMON 5 SCHMIDT TRIGGER + EQUIVALENT CIRCUIT ONLY RC EQUIVALENT CIRCUIT ONLY Outline Dimensions .270 (6.85 ) 1.00 (25.4) 0.4 (10.16) .10 (2.54) 0.3 (7.62) 1 0.7 (17.8) 2 1.2 (30.5) 1.4 (35.6) 1.6 (40.6) 5 4 3 1.7 (43.18) .042 DIA.TYP. (1.067 ) Note: Pin 5 is not present on Output Modules. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1121 Catalog 1308242 Issued 3-03 P&B 2IOM series Space Saving Mounting Boards for Slim Line Input/Output Modules * LED status indicators, plug-in fuses & pull-up resistors * Card edge, straight header, right-angle header and screw terminal logic connections * Screw terminals for field wiring * UL recognized/CSA certified for 125V max. with 5A fuses; 250V max. with #22 solid copper jumper wire instead of fuses File E61482 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Ordering Information - Boldface items listed below are more likely to be maintained in stock by authorized distributors. 2IOM4A 4 4 X X Part Number Number of I/O Channels Number of Module Positions Field Terminals: Screw Terminals Logic Terminals: Screw Terminals Logic Terminals: 50-pin card edge connector Logic Terminals: 50-pin straight header Logic Terminals: 50-pin right angle header Will accept 50-pin dual row header Designed for neg. true logic; one logic voltage 2IOM16 16 16 X 2IOM16A 16 16 X X 2IOM16E 16 16 X 2IOM24 24 24 X 2IOM24D 24 24 X 2IOM32D 32 32 X X X X X X X X X X X X X X X X Mating Connectors and Fuses Thomas & Betts 622-5015 1 Thomas & Betts 609-5030 1 Littelfuse 251-005 1 Littelfuse 251-007 1 Littelfuse 251-001 1 50-pin card edge connector 50-pin header connector 5 amp fuse 7 amp fuse 3 1 amp fuse 2 Notes: 1. Or equivalent. 2. Used only on 24 and 32 position models. 3. Used only on 2IOM4A and 2IOM16A. 2IOM4A Outline Dimensions 2IOM4A Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. 3.25 (82.55) .250 (6.35) 1 FIELD INPUT/OUTPUT SPARE 9 BARRIER STRIP 9 TERMINAL 2 PLACES 3.25 (82.55) PULL-UP RESISTORS 3.3K BARRIER STRIP 1 2 FUSE 7-AMP 4 PLACES 1 2 3 4 5 6 7 8 9 FUSE 7 AMP TYPICAL 1 2 3 4 5 2.75 (69.85) 0 LED STATUS INDICATOR .250 (6.35) 3 PULL-UP RESISTOR 3.3k TYPICAL LED 1 9 .250 (6.35) 1.9 MAX. TO TOP (48.3) OF MODULE BARRIER STRIP 1 2 3 LOGIC GND. 4 5 6 7 8 9 + LOGIC LOGIC INPUT/OUTPUT RIVETED STANDOFF THRU HOLE 4 PLACES .150 DIA. (3.81) Dimensions are shown for 1122 reference purposes only. 2.75 (69.85) 0.75 (19.05) Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 2IOM16 & 2IOM16E Outline Dimensions 10.00 (254.0) BARRIER STRIP BARRIER STRIP 2 TERMINAL LOGIC SUPPLY INPUT 16 TERMINAL 2 PLACES 1 16 17 49 +- .400 (10.16) .450 (11.43) EDGE CARD IS ARRANGED TO ACCOMODATE 2.60 50 CONTACT (66.04) KEY 0.1" (3mm) CENTER, SLOT CARD EDGE CONNECTOR 3.50 (88.90) .200 (5.08) 32 .250 (6.35) FUSE 5 AMP 1.55 (39.37) 2IOM16E With Right-Angle Header 1.45 (36.83) 0 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PULL-UP RESISTORS 3.3K .200 (5.08) LED STATUS INDICATOR WILL ACCEPT 50 PIN DUAL ROW HEADER RIVETED STANDOFF THRU HOLE 4 PLACES .150 DIA. (3.81) .750 (19.05) .250 (6.35) 1.9 MAX. TO TOP (48.3) OF MODULES 4.23 (107.32) 5.13 (130.18) 2IOM16 & 2IOM16E Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER STRIPS FIELD INPUT/OUTPUT - 1 + LOGIC INPUT/OUTPUT EDGE CONN. BOT. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 FUSE 5 AMP TYPICAL 1 2 3 4 5 LOGIC ALL GND. EVEN PINS TOP + LOGIC 2 1 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 + LOGIC LED PULL-UP RESISTOR 3.3k TYPICAL USER INSTALLABLE JUMPER (2 PLACES) 2IOM16A Outline Dimensions .250 (6.35) .250 (6.35) 9.50 (241.30) 4.68 (118.75) 1 16 BARRIER STRIP 16 TERMINAL 4 PLACES 17 .250 (6.35) 32 1.13 (28.58) FUSE 7 AMP 16 PLACES 2.75 3.25 (82.55) (69.85) 0 + - 1 2 3 4 5 6 7 1 8 16 9 10 11 12 13 14 17 PULL-UP RESISTOR 3.3K 15 LED STATUS INDICATOR 32 9.00 (228.60) BARRIER STRIP 2 TERMINAL LOGIC SUPPLY INPUT .750 (19.05) RIVETED STANDOFF THRU HOLE 4 PLACES .150 DIA. (3.81) 1.9 MAX. TO TOP (48.3) OF MODULES 9.00 (228.6) 2IOM16A Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER STRIP FIELD INPUT/OUTPUT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 2 3 4 5 LED FUSE 7 AMP TYPICAL PULL-UP RESISTOR 3.3k TYPICAL BARRIER STRIP - 1 2 LOGIC + LOGIC GND. + Dimensions are shown for reference purposes only. 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 LOGIC INPUT/OUTPUT Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1123 Catalog 1308242 Issued 3-03 P&B 2IOM24 & 2IOM24D Outline Dimensions 8.00 (203.20) .400 (10.16) BARRIER STRIP 2 TERMINAL LOGIC SUPPLY INPUT 1 +- 12 .250 (6.35) .250 (6.35) 24 13 2IOM24D With Straight Header 5.50 (139.70) FUSE 1 AMP FUSE 5 AMP 24 PLACES LED STATUS INDICATOR 49 EDGE CARD IS ARRANGED TO ACCOMODATE 50 CONTACT 0.1" (3mm) CENTER, 2.60 CARD EDGE CONNECTOR (66.04) 6.00 KEY SLOT (152.40) PULL-UP RESISTORS 3.3K 1 2 3 4 5 6 7 8 9 10 23 22 0 21 20 19 18 17 6 15 14 13 12 BARRIER STRIP 12 TERMINAL 4 PLACES 48 37 36 11 25 .250 (6.35) WILL ACCEPT 50 PIN DUAL ROW HEADER .750 (19.05) RIVETED STANDOFF THRU HOLE 4 PLACES .150 DIA. (3.81) .250 (6.35) 1.9 MAX. TO TOP (48.3) OF MODULES 7.50 (190.50) 2IOM24 & 2IOM24D Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. FUSE 1 AMP OPTIONAL FUSE 1 AMP + - 1 2 1 2 3 4 5 49 3 4 0 5 6 1 7 8 2 9 10 11 12 3 4 13 14 15 16 17 18 19 20 21 22 23 24 5 6 7 8 9 10 11 BARRIER STRIP FOR FIELD WIRING OF MODULE INPUT/OUTPUT FUSE 5 AMP MODULE LOCATION 47 45 43 41 39 37 35 33 31 29 27 25 LED ALL EVEN PINS 2-50 PULL-UP RESISTOR NETWORK 3.3k 23 21 19 17 15 13 11 9 7 5 3 1 50-PIN CONNECTOR 5 4 3 2 1 MODULE LOCATION 23 22 21 20 19 18 48 47 46 45 44 43 42 41 40 39 38 37 Dimensions are shown for 1124 reference purposes only. 17 16 15 36 35 34 33 32 31 14 3029 28 13 12 27 26 25 Dimensions are in inches over (millimeters) unless otherwise specified. BARRIER STRIP FOR FIELD WIRING OF MODULE INPUT/OUTPUT Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 2IOM32D Outline Dimensions .250 .250 (6.35) (6.35) 10.20 (261.62 .400 (10.16) BARRIER STRIP 2 TERMINAL LOGIC SUPPLY INPUT 1 16 17 32 + - FUSE 1 AMP. 2IOM32D With Straight Header EDGE CARD IS ARRANGED TO ACCOMODATE 50 CONTACT 0.1" (3mm) CENTER, CARD EDGE CONNECTOR FUSE 5 AMP 32 PLACES 49 3.30 (83.82) 2.60 (66.04) 6.20 (157.48) 0 1 2 3 4 5 6 7 31 30 29 28 27 26 25 24 8 9 10 11 12 13 14 15 5.7 (144.78) 23 22 21 20 19 18 17 16 LED STATUS INDICATOR 1 PULL-UP RESISTORS 3.3K 64 49 48 33 5.50 (139.7) BARRIER STRIP 16 TERMINAL 4 PLACES .250 (6.35) .250 (6.35) 1.9 MAX. TO T (48.3) OF MODU RIVETED STANDOFF THRU HOLE 6 PLACES .150 DIA. (3.81) 9.70 (246.38) .750 (19.05) 2IOM32D Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER STRIP FIELD INPUT/OUTPUT - + FUSE 1 AMP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 45 46 43 49 48 44 50 47 41 36 42 35 40 38 39 37 LOGIC INPUT/OUTPUT FUSE 5 AMP 1 2 3 4 5 LED INDICATOR PULL-UP RESISTOR 3.3k LOGIC GROUND 14 12 13 11 16 9 15 10 4 1 7 3 2 8 5 6 17 19 21 22 23 25 26 28 30 31 32 34 5 4 3 2 1 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 FIELD INPUT/OUTPUT Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 1125 Catalog 1308242 Issued 3-03 P&B Engineering Notes Dimensions are shown for 1126 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 TIME DELAY RELAYS & MODULES Alphanumeric Index Series Type Page AGASTAT Timer Accessories ............................................. 1206 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays . 301-336 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Forcibly-Guided Contacts.............. 36-79 Plug-in/Panel Mount Relays 6 AGASTAT Timer Terms and Definitions ............................. 1204 AGASTAT Timer Timing Modes ......................................... 1205 2100 ..................... Miniature Electropneumatic Timer ...... 1254 7000 ..................... Electropneumatic Timer ...................... 1248 3RP15 ................... Programmable Time Delay Relay ........ 1207 48K ....................... Programmable Time Delay Relay ........ 1210 CB ........................ Discrete Function Time Delay Relay ... 1228 CD ........................ Discrete Function Time Delay Relay ... 1222 CG ........................ Discrete Function Time Delay Relay ... 1220 CH ........................ Discrete Function Time Delay Relay ... 1226 CK ......................... Discrete Function Time Delay Relay ... 1224 CL ......................... Discrete Function Time Delay Relay ... 1231 CN1 ...................... Discrete Function Time Delay Relay ... 1219 CNM5 ................... Programmable Time Delay Relay ........ 1215 CNS ...................... Programmable Time Delay Relay ........ 1213 CNT ...................... Programmable Time Delay Relay ........ 1211 CR ........................ Discrete Function Time Delay Relay ... 1230 CU ........................ Discrete Function Time Delay Relay ... 1231 MD0 ..................... Discrete Function Time Delay Relay ... 1233 P&B Time Delay Relay Terms & Definitions ...................... 1202 P&B Time Delay Relay External Resistor Guide ................. 1203 SCB ...................... Discrete Function Time Delay Relay ... 1235 SCE ...................... Discrete Function Time Delay Relay ... 1239 SCF ....................... Programmable Time Delay Relay ........ 1218 SRC ...................... Discrete Function Time Delay Relay ... 1237 SSC ...................... Discrete Function Time Delay Relay ... 1234 SSF ....................... Programmable Time Delay Relay ........ 1217 SST ....................... Discrete Function Time Delay Relay ... 1238 NOTE: In addition to the products listed in this section of the databook, time delay relays are also described in other sections are available with printed circuit board terminals. Relays with Following is a list: MT* .......................................................................... 742 Plug-in/Panel Mount *Relay, socket and module combination. General Purpose Relays............ 701-749 7 Latching, Impulse, Rotary & Special Application Relays TR ............................................................................. 917 Power Relays & Definite 8 Purpose Contactors...................... 89-131 Time delay relays are also included in our line of high performance relays (see overview in section 14 of this databook). Latching, Impulse & Rotary Relays ............................... 149-154 9 Automotive Relays ...................... 141-148 10 Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Modules .................................... 1201-1256 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 STA ....................... Discrete Function Time Delay Relay ... 1236 VTM-1 ................... Discrete Function Timing Module ....... 1240 VTM1 .................... Discrete Function Timing Module ....... 1241 VTM2 .................... Discrete Function Timing Module ....... 1244 VTM3 .................... Discrete Function Timing Module ....... 1245 VTM4 .................... Discrete Function Timing Module ....... 1246 VTM7 .................... Discrete Function Timing Module ....... 1247 VTMA1 ................. Discrete Function Timing Module ....... 1242 VTMR1 ................. Discrete Function Timing Module ....... 1243 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1201 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B P&B Solid State Time Delay Terms and Definitions A wide selection of various types of solid state time delay controls are presented by Potter & Brumfield to meet the demands of commerce and industry. Typical applications for P&B time delay relays include data processing operations, machine tool, safety device control and alarm circuit actuating. These diverse applications require a wide variety of time delays such as: fixed time delay on "operate" or "release" which is factory set and cannot be adjusted; resistor-adjustable time delay on "operate" which is adjustable with an external resistor; knob-adjustable time delay on "operate" which has a calibrated knob built into the assembly for ease of adjusting the time period. Each of the series of solid state time delays presented here varies in its degree of accuracy, variety available and cost to meet the requirements of every application. Timing Variations - Any difference between the actual time delay of a particular device and the nominal value specified for that device. These variations are due to: (1) Manufacturing tolerances (component selections and tolerances, adjustments, etc.). (2) Input voltage variation. Includes DC or rms voltage variations, plus instantaneous voltage variations at time the control voltage is applied (AC only). (3) Temperature (ambient plus self heating). (4) Input cycling conditions: a. duration of "off" time b. duration of "on" time after actual time out The terms used to define and specify time delay relay performance must reflect one or more of these time variation factors with sufficient clarity that both the manufacturer and the user may arrive at essentially the same evaluation of device performance. To this end, the following terms and definitions are used. Specified Delay Time - The advertised (or print specified) time of the delay function. Actual Time, Standard Conditions (ATSC) - The actual delay time of a given device operated at 25C and nominal input voltage, with sufficient "off" time of input voltage to permit full "short term" recovery of the timing interval. For purposes of establishing a reference ATSC it is recommended that the device be cycled @ 25C, nominal voltage, with input pulses of 1.3X specified delay time, with 1 sec. off times. The resulting average of a group of consecutive time delay readings (excluding the 1st, which had an unknown off time) may be used to determine ATSC. Five cycles should be considered adequate for this determination. The off time required for full "short term" recovery of the timing interval will vary to some extent, depending on relay type, timing circuit impedance (normally related to length of timing period), whether capacitor shorting contacts are used, whether the previous timing cycle was completed or interrupted during time out, and, if completed, the degree to which the input control "on" time extended beyond actual time out. In practice, off times used may vary from a minimum approaching the release time of the output (50 to 200 ms typical, depending on the particular design) to a second or more, with as much as 15% difference in the resulting delay times. The greatest rate of change occurs as off times become increasingly short, while the rate of change becomes relatively negligible as increasingly long off times approach 1 second. However, for very long off times (measured in hours), and additional change in the first subsequent operation delay time may be experienced. Dimensions are shown for 1202 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. This additional change may be as much as 1-4% (depending again on time delay type and design) and is usually obtained with off periods from 1-24 hours or more. Repeatability - The percent variance of time within a group of consecutive timing cycles, starting with the second operation, when the timing device is operated under constant conditions (constant on-off times, input voltage and temperature). The average of a series of five consecutive operations, at any given set of conditions within specifications, will serve as the reference for determining the variation of individual readings within the group from the average. The maximum variation under such conditions should not exceed the repeatability value specified. For convenience, repeatability under standard conditions could be determined from the test used to measure ATSC (see below, left). Tolerance - The variation between the specified delay time and the ATSC value, given in percent of the former. Delta-Time - The percent timing change (from the ATSC value) for any variation of voltage and/or temperature within specified limits. Tests for this parameter would be essentially the same as described for ATSC, except that any constant combination of specified voltage and temperature extremes may be used. Recycle Time - The length of time the control voltage must be interrupted, immediately following a timing interval, to produce a subsequent delay of at least 95% of the reference delay under constant conditions of input voltage and ambient temperature. The reference delay may be the ATSC value determined under standard conditions (nominal voltage and 25C); however, any constant voltage-temperature combination within specifications may be used (must be the same voltage-temperature combination as used for recycle checks). Note: If control voltage is interrupted prior to completion of a timing period, or at a time other than immediately following time out, the recycle time value (off time) may produce a subsequently shorter timing period, depending upon the particular design and when the interruption occurs within the internal RC charging cycle. Correspondingly, this subsequent time delay may be from 85% to 95% of the reference actual delay as defined above. Timing Cycle Interrupt "Transfer" - A momentary transfer (pickup and dropout) of the switching relay contacts which may occur if the timing cycle is interrupted. This phenomenon is inherent in CU series time delays; and, depending on when the timing interval is interrupted, the transfer duration may vary from zero to the release time value for that device. Release Time - The time required, after time out, for the output switch to return to its normal, de-energized state when the control voltage is removed. This will vary to some extent with the duration of "on" time after actual time out and with temperature and voltage; the shortest release time being obtained when control voltage is removed immediately following completion of a timing period under conditions of minimum temperature and input voltage. Transient Protection is provided so that the time delay will not be damaged by a transient input. Polarity Protection is provided internally to protect the time delay of DC units from reversal of input voltage. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B External Resistor Selection Guide for P&B Time Delay Relays For CL, CK & CU Series For CD Series The "minimum" time setting on an external resistor adjustable model in any of these series is obtained by shorting together the external resistor terminals of the relay. The "maximum" time setting (within tolerance limits) is obtained by using the resistance value listed across from the maximum time for that unit in the tables below. Timing values between the minimum and maximum limits are linear with resistance within 10%. It is recommended that a 1/4 watt, mimimum, resistor be used. External timing resistor should have less than 500 PPM temperature coefficient. The "minimum" time setting on an external resistor adjustable model in the CD series is obtained by shorting together the external resistor terminals of the relay. The "maximum" time setting (within tolerance limits) is pre-set at the factory, and no external resistor is necessary. Approximate resistance values required to obtain times between the minimum and maximum limits can be determined using the table and graph below. It is recommended that a 1/4 watt, mimimum, resistor be used. External timing resistor should have less than 500 PPM temperature coefficient. The external resistor value R0 required to obtain any time T0 can be calculated using the following formula: CD Resistor Values (AC & DC Models) R0 = R1 T0 TS T1 R1 R0 = = = = = ( T0 - TS T1 - TS ) Factory-set Time Delay. No Resistor (seconds) Desired Time Short Time (see relay type) Long Time (see relay type) Extrernal Resistor Value required to obtain T1 External Resistor Value required to obtain T0 Example: Given a CUH-41-30060, find an external resistor value that will give a 30 second delay. Known: T1 TS R1 R0 = = = = 60 seconds 1 second 1 meg 1 x 106 (29) 59 Approximate Resistance* to Reduce Delay by 1/2 Short Circuit Time Delay (seconds) 1.0 33K ohms 0.1 5.0 200K ohms 0.1 10.0 400K ohms 0.1 * Resistor values shown correspond to a 1.0 multiplying factor. Use the graph below to determine other resistor values required to obtain time periods between the limits stated in the chart. CD Timing Resistor Curve R0 = 492K CL & CU Delay On Operate Resistor Values Time (Sec.) Approximate Resistance CU CL AC DC 1.0 10.0 0.1 10.0 Short 200K Short 160K 1.0 30.0 0.3 30.0 Short 600K Short 500K 1.0 60.0 0.6 60.0 Short 1.2 Meg Short 1.0 Meg 1.0 120.0 1.2 120.0 Short 2.4 Meg Short 2.0 Meg Percent of Maximum Time 100 Note: The actual time obtained will normally be within 5% of the desired time. This is due to construction tolerance. 90 80 70 60 50 40 30 20 10 0 0.01 0.1 1.0 10.0 100 Resistor Multiplying Factor To obtain CD series time delay relays having a linear resistance with time, please consult the factory. CK Delay On Operate Resistor Values Time Approximate Resistance (Sec.) AC DC 0.1 10.0 Short 750K Short 750K 1.8 180.0 Short 1.0 Meg Short 910K CK Delay On Release Resistor Values Time Approximate Resistance (Sec.) AC & DC 0.1 10.0 Short 820K 0.6 60.0 Short 910K Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1203 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT AGASTAT Solid State Time Delay Terms and Definitions Accuracy, absolute (or calibration accuracy) - the deviation of a selected time delay from the actual delay, measured with reference to a time standard, under standard conditions. Load rating - the maximum current, voltage, and frequency (if AC) of the loadcircuit energy that may be switched by a TDR, for normal life expectancy. Accuracy, "attainable" - the "worst case" deviation in time delay, from a selected value, including all factors that contribute to its "error budget," including long-term drift, temperature drift, resolution, calibration accuracy, line-voltage and line-frequency effects, etc. Mode - see operating mode. Accuracy, overall - the maximum deviation from the average of 100 consecutive time delays at any given time setting throughout the operating temperature, voltage, and frequency ranges. Accuracy, repeat - the maximum deviation from the average of 100 consecutive time delays at any given time setting and any fixed combination of temperature and operating voltage. Breakdown, circuit-to-case - the voltage insulation between any part of a TDR's circuitry and the frame or any other conductive part in the structure, including the case. breakdown, control-to-load - the voltage insulation between control and load circuits. Calibration linearity - in the mechanical calibration of a TDR delay-setting scale, the largest deviation of the actual delay-vs-rotation curve from a straight line drawn from minimum to maximum delay. Counting TDR - a TDR in which a stable source generates precisely timed voltage pulses, and a digital counter registers a different voltage pattern or code on its output terminals for each pulse counted. The counter is connected to a digital decoder, preset to recognize a given code, which then operates the load-switching device. Current drain - the current drawn by the delay and switching circuits in the TDR, not including the current drawn by the load. delay - an interval of time generated before some planned event is caused to occur. Delay adjustability - the capability of setting the duration of a time delay generated by a TDR; the Delay range and resolution - taken together, describe the adjustability. Delay adjustment - means of setting the duration of a time delay: pointerknob-and scale, thumbwheel switch, external or internal potentiometer, etc. delay range - the span of time within which a TDR can generate time delays. Dielectric withstand - the ability of insulating materials and spacings to withstand specified overvoltages for a specified time without flashover or puncture. Electromechanical relay (EMR) - a controlled switch operated by causing sufficient current to flow through an electromagnetic coil; the resultant magnetic field, when strong enough, overcomes a spring force and closes and/ or opens the switch contacts. Interface - in a TDR, one of the following: the nature of the means of adjusting time delay; of indicating status of delay and load; of powering control and load circuits, or of switching control and load circuits. Isolation, control-to-load - the degree to which interaction has been prevented between control and load circuits in a TDR usually expressed as the effective impedance between them. Load gates - solid state circuits that perform logic "switching functions." Noise - any unwanted signal impinging on a circuit or its environment. Operate time - the longest interval between energization of an output relay and the completion of contact transfer under any combination of operating temperature and voltage. Operating life - a measure of the number of operations a TDR can be expected to perform within specifications; for TDRs with electromechanical (EMR) loadswitching means, there are two ratings - mechanical and electrical operations at full rated load. Operating mode - the relationship between control signal input, generation of delay or count, and transfer of load-switching contacts. operating voltage range - the range of voltages over which a TDR will perform to specification. May be applied to either delay generating circuits, loadswitching circuits or both. Peak current - the maximum short-duration load-circuit rating of the loadswitching circuit; also called "in-rush" or "surge" current. R-C timer - an electronic time-delay relay in which the charging of a capacitor (C) through a resistor (R) generated the delay and an electronic circuit establishes a threshold, or critical value, for the capacitor voltage; when this value is reached, a load-switching device is operated. Release time - the longest time interval between de-energization of an output relay and the complete transfer of its contacts under any combination of operating temperature and voltage. Resettability - the precision with which a delay adjustment, once changed, can be reset. Reset time - the shortest allowable interval between complete or interrupted timing cycles without risk of delay error or malfunction. Resolution - the precision with which delay adjustment may be set; it depends on the type of adjustment means; for example, in a switch-settable design, the smallest change that can be made by moving one unit in the least-significant decade in a selector switch array. solid-state relay (SSR) - a relay in which a semiconductor device (e.g., an SCR or TRIAC), switches the load. Stability, long-term - the measure of the effect of time along on the delay generated by a TDR under specific operating conditions - e.g., the difference in the repeat accuracy between that measured when the TDR is new, and that measured one year later. Stability, temperature - the effect of ambient temperature on the delay of a TDR, expressed in terms of the percent deviation in a preset delay per degree of temperature change from some nominal value. TDR - time-delay relay. Time-delay relay (TDR) - a device that upon energization or operation of a control circuit, generates a delay, at the end of which some planned event (e.g., load switching, or secondary control function) is caused to occur. Leakage current - the current conducted by a solid state switching device in an "off" state. Timing diagram or timing ladder - a graphic representation of two or more sequences of events, all drawn to the same horizontal time scale, so that any point in one sequence occurs at the same time as any point directly above or below it in another sequence. LED readout - a numerical display made up of light-emitting diodes (solid state devices that glow when current is passed through them). Timing range - the range of time intervals over which a particular TDR will generate delays. linearity - the regularity of calibration of a delay scale - i.e., the uniformity of the spacing equal delay increments. In a TDR with externally controlled delay, the constancy of the delay-to-resistance ration. Transfer - the switching of a relay's contacts from one state to the other, but in the past tense commonly used to denote the position of the contacts in the relay's energized or "transferred" state as opposed to its de-energized or "normal" state. Line-frequency sensitivity - the deviation in delay, at any setting within specifications, per hertz or percent of line-frequency change from the nominal value, measured at specified line voltage and ambient temperature. Line-voltage sensitivity - the deviation in delay, at any setting within specification, per volt or percent of line-voltage change from the nominal value, measured at specified line voltage and ambient temperature. Load-dependent delay - the characteristic of certain TDR's in which there is a significant change, due to internal heating, of a preset delay interval, following a long "load-ON" period. Dimensions are shown for 1204 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Transient protection or transient suppression - the prevention of malfunction of a TDR due to power-line transients, or the means of doing so. Usually effective only over a stated range or up to a stated maximum transient amplitude and duration. Transient voltage tolerance - the largest momentary overvoltage peak that a TDR will withstand without damage or catastrophic malfunction. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT AGASTAT Time Delay Relay Timing Modes On-Delay: Time delay is initiated upon application of a control signal (i.e., operating voltage or on 11-pin model closure of the control switch). The output contacts energize at the end of the delay. Output contacts and the time delay circuit reset upon removal of the control signal regardless of state. ON / CLOSED OPERATING VOLTAGE/ CONTROL SWITCH OFF / OPEN On-Delay / Off-Delay: Time delay is initiated for delay 1 upon closure of the control switch, for delay 2 upon opening of the control switch. (Operating voltage is applied continuously.) Output contacts energize at the end of time delay 1, and de-energize at the end of time delay 2. If the control state is reversed during the time delay, the time delay circuit automatically resets to zero. Note: For the 48K series, time delays 1 and 2 are identical. ON OPERATING VOLTAGE ENERGIZED OUTPUT CONTACTS OFF DELAY CLOSED DE-ENER. CONTROL SWITCH OPEN Off-Delay: The output contacts energize when the control switch is closed. The time delay is initiated upon opening of the control switch (operating voltage is applied continuously). De-energization occurs at the end of the delay. Output contacts energize and the time delay circuit resets upon closure of the control switch. ENERGIZED OUTPUT CONTACTS DE-ENER. DELAY 1 DELAY 2 Repeat Cycle: Application of the operating voltage starts time delay 1. Upon expiration of this delay, the output contacts energize. Time delay 2 begins simultaneously. At the end of time delay 2, the output contacts de-energize, and a new cycle begins. The cycles continue until power is removed. To reset the timer, input voltage must be removed. The state of the output contacts may be reversed on the 11-pin 48K by closing the control switch. Note: For the 48K series, the time delays are identical. ON OPERATING VOLTAGE OFF CLOSED CONTROL SWITCH OPEN ENERGIZED OUTPUT CONTACTS DE-ENER. DELAY ON OPERATING VOLTAGE OFF Interval: Time delay is initiated upon application of a control signal (i.e., operating voltage or closure of the control switch on 11-pin models). The output contacts energize when the control signal is applied. At the end of the delay, the output contacts de-energize. Output contacts and the time delay circuit reset upon removal of the control signal regardless of state. ON / CLOSED OPERATING VOLTAGE/ CONTROL SWITCH OFF / OPEN ENERGIZED OUTPUT CONTACTS ENERGIZED OUTPUT CONTACTS DE-ENER. DELAY 1 DELAY 1 DELAY 2 DELAY 2 Accumulating On-Delay: Time delay is initiated upon closure of the control switch. (Operating voltage is applied continuously.) Energization of the output contacts occurs at the end of the delay. If the control switch is opened during the time delay, the time delay pauses, and the relay holds (remembers) the delay accumulated so far. The time delay resumes when the control switch is re-closed. After energization, reset by opening the control switch. Regardless of state, reset by removing the operating voltage. ON DELAY OPERATING VOLTAGE DE-ENER. OFF CLOSED On / Interval : Time delay 1 is initiated upon application of a control signal (i.e., operating voltage or closure of the control switch on 11-pin models). The output contacts energize at the end of time delay 1 and de-energize at the end of time delay 2. Output contacts and the time delay circuit reset upon removal of the control signal regardless of state. Note: For the 48K series, delay 2 is fixed at 0.5 seconds. CONTROL SWITCH OPEN ENERGIZED OUTPUT CONTACTS DE-ENER. DELAY ACCUMULATION ON / CLOSED OPERATING VOLTAGE/ CONTROL SWITCH OFF / OPEN ENERGIZED OUTPUT CONTACTS DE-ENER. DELAY 1 DELAY 2 One Shot (Latching Interval): Operating voltage must be applied continuously. Output contacts energize and time delay is initiated upon closure of the control switch. Once closed, state of control switch has no further influence until time delay has expired. Upon expiration of time delay, output contacts deenergize and timer is reset by opening the control switch. ON OPERATING VOLTAGE OFF CLOSED CONTROL SWITCH Note: When an external control switch is used, it must be closed before the unit is energized. If external control switch is open, the unit will not time out. OFF AT ANY TIME OPEN ENERGIZED OUTPUT CONTACTS DELAY DE-ENER. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1205 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Accessories for AGASTAT Solid State Time Delay Relays Sockets BDS08SS Socket * 8-pin octal socket * DIN rail or panel mount * Rated 10A @ 300VAC * #6-32 screws w/captive clamp plates * File E140494 * File LR29523M37 BDS11SS Socket * 11-pin octal-type socket * DIN rail or panel mount * Rated 10A @ 300VAC * #6-32 screws w/captive clamp plates * File E140494 * File LR29523M37 BCSF11SC Socket * Use with SCF series timer * 11-pin octal-type socket * DIN rail or panel mount * Rated 10A @ 380VAC * M3 screws w/captive clamp plates * File E140494 * File LR29523M37 BDT11SS Socket * 11-pin tab socket * DIN rail or panel mount * Rated 10A @ 300VAC * #6-32 screws w/captive clamp plates * File E140494 * File LR29523M37 External Potentiometer POT1MV External Potentiometer Time adjustment by extermal potentiometer or fixed resistor for series SCB, SCC,SSC, STA, VTM-1, VTM1, VTM2, VTM3, VTM4 & VTM7. (Potentiomter or resistor furnished by customer.) Minimum time is obtained with zero resistance. Longer time is obtained by adding resistance specified at right for each second, hour or cycle above the minimum. Alternatively, an external 1 megohm potiometer may be used. Dimensions are shown for 1206 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Time Range .1 to 3 sec. .1 to 10 sec. .5 to 15 sec. 1 to 30 sec. 2 to 60 sec. 4 to 120 sec. 6 to 180 sec. 10 to 300 sec. Ohms (10%) 333.3K/sec. 100.0K/sec. 66.7K/sec. 33.3K/sec. 16.7K/sec. 8.3K/sec. 5.6K/sec. 3.3K/sec. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 3RP1 series Multifunction Solid State DIN Mount Time Delay Relay * * * * * * * Available as SPDT or DPDT 15 time setting ranges .05s - 100hr programmable timing range Universal 24-240 VAC/VDC or fixed input types. 3A switching current rating Fits 35mm DIN track Single function, Delay-On available VDE Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Standards and Specifications Contact Data @ 25C * IEC 721-3-3 "Ambient conditions" * IEC 61812-1/DIN VDE 0435 Part 2021 "Solid State Relays, Time Relays" * IEC 1000 "electromagnetic compatibility" * IEC 947-5-1: DIN VDE 0660 Part 200 "Low-voltage control circuit devices" Arrangements: 1 Form C (SPDT). 2 Form C (DPDT) Material: Silver tin oxide. Rating: 3A @ 250VAC. Switching Frequency: 2,500 ops./hour. Electrical Life: 200,000 operations min. at rated load. Mechanical Life: 30 x 106 operations. Input Data @ 25C Timing Specifications Voltage: Universal Input Type: 24 - 240V, 50/60 Hz. AC or DC. Fixed Input Type: 24, 100-127, 200-240AC; 24VDC. Operating Range: AC: 85 to 110%. DC: 80 to 125%. Power Requirement: Universal Input Type: AC: 6VA. DC: 2W. Timing Ranges: 0.05 to 1 / 0.15 to 3 / 0.5 to 10 / 1.5 to 30 / 5 to 100 sec.; 0.05 to 1 / 0.15 to 3 / 0.5 to 10 / 1.5 to 30 / 5 to 100 min.; 0.05 to 1 / 0.15 to 3 / 0.5 to 10 / 1.5 to 30 / 5 to 100 hr. Timing Adjustment: Potentiometer adjustable within selected range. Tolerance: 5% of full scale value. Reset Time: 150 ms. Minimum On Period: 35 msec. Repeatability: 1%. Environmental Data Temperature Range: Storage: -40C to +80C. Operating: -25C to +60C. Protection Category: IP 20 according to EN 60529. Timing Modes Mechanical Data See the following page for a description of timing modes. Termination: Screw terminal. Enclosure: Plastic DIN case. Mounting: 35mm DIN track. Weight: (3RP1505) 5.29 oz. (150g) approximately. (3RP1525) 3.88 oz. (110g) approximately. Configuring * Changing the timer range and their functions will only be effective when they are carried out in a voltage-free state. * Trigger input B1 or B3 must only be started when the supply voltage is applied. * The same potential must be applied to A1 and B1, or A3 and B3. With the two-voltage design, only one voltage range must be connected. * The triggering of the load paralleled to the start input is not permissible when using AC (see adjacent diagrams). L1 L1 S1 S1 A1 K2 A2 N B1 K1 A1 K2 S1 B1 K1 N Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Input Voltage DC AC 3RP1505 Multifunction 24 24 24 24-240 24, 100-127 24, 200-240 24, 100-127 24-240 Input Type Contact Arrang. Wiring Diagram Functions Part Number Fixed Fixed Fixed Universal SPDT SPDT DPDT DPDT 1 to 8 1 to 8 9 to 24 9 to 24 1 to 8 1 to 8 9 to 24 9 to 24 3RP15 05-1AQ30 3RP15 05-1AP30 3RP15 05-1BQ30 3RP15 05-1BW30 Fixed Fixed Fixed Fixed SPDT SPDT DPDT DPDT 1 1 9 9 1 1 9 9 3RP15 25-1AQ30 3RP15 25-1AP30 3RP15 25-1BQ30 3RP15 25-1BP30 3RP1525 Delay On 24 24 24 24 24, 100-127 24, 200-240 24, 100-127 24, 200-240 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1207 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions 3RP1505-1A, 3RP1525-1A 3RP1505-1B, 3RP1525-1B 3.39 (86.0) .19 (5.0) .31 (8.0) 2.36 (60.0) 2.99 (76.0) .31 (8.0) 2.36 (60.0) 1.18 (30.0) 4.33 (110.0) 3.54 (90.0) 3.23 (82.0) 3.39 (86.0) .19 (5.0) 3.23 (82.0) 4.33 (110.0) 2.44 (62.0) 4.02 (102.0) 2.44 (62.0) 4.72 (120.0) 4.72 (120.0) .59 (15.0) .59 (15.0) .23 (6.0) .886 (22.5) .23 (6.0) .886 (22.5) Wiring Diagram 1. On-Delay 2. Off-Delay With Auxiliary Voltage 3RP1505-1A 3RP1525-1A 3RP1505-1A 3RP1505-1A AC/DC 24V AC/DC 24V A1 A3 15 A2 16 18 A1 B1 A3 B3 15 5. Making-Pulse Contact 3RP1505-1A 3RP1525-1A A2 16 18 6. Breaking-Pulse Contact With Auxiliary Voltage AC/DC 24V A1 A3 15 A2 16 18 16 18 15 25 A2 16 18 26 28 13. Making-Pulse Contact 3RP1505-1B A1 B1 A3 B3 15 A2 16 18 Dimensions are shown for 1208 reference purposes only. A2 25 26 28 AC/DC 24V 16 18 25 A2 16 18 A2 26 28 Dimensions are in inches over (millimeters) unless otherwise specified. 26 28 16. Additive On-Delay With Auxiliary Voltage and Instantaneous Contact AC/DC 24V AC/DC 24V 25 16 18 25 3RP1505-1B AC100/127V AC200/240V AC100/127V AC200/240V A1 B1 A3 B3 15 A1 B1 A3 B3 15 26 28 15. Pulse Forming With Auxiliary Voltage AC/DC 24V AC100/127V AC200/240V 15 12. Flashing AC100/127V AC200/240V A1 B1 A3 B3 15 26 28 16 18 3RP1505-1B 3RP1505-1B A2 16 18 25 A1 A3 A2 AC/DC 24V 14. Breaking-Pulse Contact With Auxiliary Voltage AC/DC 24V 16 18 AC100/127V AC200/240V 3RP1505-1B AC100/127V AC200/240V A1 B1 A3 B3 15 3RP1505-1B AC100/127V AC200/240V A1 A3 8. Additive On-Delay With Auxiliary Voltage and Instantaneous Contact AC/DC 24V 11. On-and Off-Delay With Auxiliary Voltage AC/DC 24V AC/DC 24V 16 18 AC100/127V AC200/240V A2 3RP1505-1B AC100/127V AC200/240V A2 3RP1505-1A A1 B1A3 B3 15 10. Off-Delay With Auxiliary Voltage 3RP1505-1B 3RP1525-1B 15 AC/DC 24V A1 B1A3 B3 15 9. On-Delay 7. Pulse Forming With Auxiliary Voltage AC100/127V AC200/240V A2 A1 A3 16 18 3RP1505-1A AC100/127V AC200/240V AC100/127V AC200/240V AC/DC 24V AC100/127V AC200/240V A1 B1 A3 B3 15 3RP1505-1A AC/DC 24V 3RP1505-1A AC100/127V AC200/240V A2 4. Flashing AC/DC 24V AC100/127V AC200/240V AC100/127V AC200/240V 3. On and Off Delay With Auxiliary Voltage A1 B1 A3 B3 15 A2 16 18 25 26 28 Specifications and availability subject to change. A1 B1 A3 B3 15 21 A2 16 18 22 24 www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Wiring Diagrams (continued) 18. Off-Delay With Auxiliary Voltage and Instantaneous Contact 3RP1505-1B 19. On and Off Delay With Auxiliary Voltage and Instantaneous Contact 3RP1505-1B AC/DC 24V 3RP1505-1B 15 21 A2 16 18 22 24 A2 21. Making-Pulse Contact and Instantaneous Contact AC100/127V AC200/240V A1 B1 A3 B3 15 21 A2 22 24 16 18 22. Breaking-Pulse Contact With Auxiliary Voltage and Instantaneous Contact 3RP1505-1B A2 16 18 22 24 A2 21 21 22 24 A2 16 18 22 24 24. Star-Delta Function 3RP1505-1B AC/DC 24V AC/DC 24V A1 B1 A3 B3 15 15 15 AC100/127V AC200/240V AC100/127V AC200/240V AC100/127V AC200/240V A1 A3 A1 A3 3RP1505-1B AC/DC 24V AC/DC 24V 16 18 21 23. Pulse Forming With Auxiliary Voltage and Instantaneous Contact 3RP1505-1B AC100/127V AC200/240V AC/DC 24V AC100/127V AC200/240V A1 B1 A3 B3 15 A1 A3 3RP1505-1B AC/DC 24V AC/DC 24V AC100/127V AC200/240V AC100/127V AC200/240V 20. Flashing and Instantaneous Contact 16 18 A1 B1 A3 B3 15 21 16 18 A2 22 24 21 A1 A3 22 24 A2 17 27 Y18 17. On-Delay and Instantaneous Contact 28 Timing Function Descriptions and Settings 3RP1505-1A 3RP1505-1B 1. On Delay 5. Impulse On 9. On Delay 13. Impulse On 17. On Delay A./A2 A./A2 A./A2 A./A2 A./A2 15/18 15/16 15/18 15/16 15/18 15/16 t 15/18 15/16 t t 15/18 15/16 15/18 15/16 t 25/28 25/26 21. Impulse On A./A2 t t 25/28 25/26 21/24 21/22 21/24 21/22 2. Off Delay 6. Impulse Off 10. Off Delay 14. Impulse Off 18. Off Delay 22. Impulse Off A./A2 A./A2 A./A2 A./A2 A./A2 A./A2 > _ 35ms B./A2 15/18 15/16 > _ 35ms B./A2 15/18 15/16 > _ 35ms B./A2 15/18 15/16 t t > _ 35ms B./A2 15/18 15/16 t t t 25/28 25/26 21/24 21/22 21/24 21/22 7. Pulse Shaping 11. On/Off Delay 15. Pulse Shaping 19. On/Off Delay A./A2 A./A2 A./A2 A./A2 A./A2 A./A2 B./A2 15/18 15/16 B./A2 15/18 15/16 B./A2 15/18 15/16 B./A2 15/18 15/16 B./A2 15/18 15/16 B./A2 15/18 15/16 t t > _ 35ms t 25/28 25/26 t t > _ 35ms t t 25/28 25/26 8. Cumulative On Delay 12. Flasher 16. Cumulative On Delay 20. Flasher A./A2 t1 B./A2 15/18 15/16 A./A2 15/18 15/16 A./A2 t1 B./A2 15/18 15/16 t t Dimensions are shown for reference purposes only. t3 t t 25/28 25/26 t 22/24 21/22 Dimensions are in inches over (millimeters) unless otherwise specified. t3 t t Specifications and availability subject to change. t 24. Star/Delta A./A2 15/18 15/16 21/24 21/22 > _ 35ms 21/24 21/22 A./A2 15/18 15/16 t2 23. Pulse Shaping t 21/24 21/22 4. Flasher t2 > _ 35ms B./A2 15/18 15/16 t 25/28 25/26 3. On/Off Delay > _ 35ms B./A2 15/18 15/16 t A./A2 17/18 27/28 t 50ms www.tycoelectronics.com Technical support: 1209 Refer to inside back cover. Catalog 1308242 Issued 3-03 NOTE: This product is scheduled to soon be discontinued. Suggested alternatives are the P&B CNT, CNS and CNM5 series time delay relays. AGASTAT 48K series Programmable Time Delay Relay * * * * * * * Up to 8 user-programmable timing modes 0.1 sec. to 10 hr. programmable timing range Socket or panel mount (1/16 DIN enclosure) Universal (24-240VAC/24-125VDC) and fixed input types 10A output relay with DPDT contacts Two LED indicators on universal input types ANSI C37.90 transient protection on universal input types File E60363 File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Initial Dielectric Strength Modes are user selectable via rotary selector switch (shown above) or screwdriver adjustment on optional recessed knob equipped models that are available on a special order basis for tamper-resistant requirements. Modes offered on specific models are: 48K91U: On-Delay, Off-Delay, Interval, On/Interval, One Shot, Repeat Cycle, On-Delay/Off-Delay, Accumulating On. 48K90U: On-Delay, Interval, On/Interval, Repeat Cycle. 48K01A: On-Delay. Between Coil, Contacts and Case: 1,500VAC. Timing Specifications Timing Ranges: 0.1 to 1 / 1 to 10 / 10 to 100 sec.; 1 to 10 / 10 to 100 min.; 1 to 10 hr. Timing Adjustment: Potentiometer adjustment with linear reference calibrations. Recessed dial option is available on a special order basis for tamper-resistant requirements. Accuracy: Repeat Accuracy: 0.5% 0.02 sec. Overall Accuracy: 1% 0.02 sec. Reset Time: 25 ms. Relay Operate Time: 50 ms. Relay Release Time: 50 ms. Contact Data @ 25C Arrangements: 2 Form C (DPDT). Rating: 10A @ 30VDC or 120/240VAC, resistive. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Input Data @ 25C Voltage: 48K90U & 48K91U: 24 - 240VAC, 50/60 Hz. and 24-125VDC. 48K01A: 120VAC, 50/60 Hz. Power Requirement: 2W, max. Transient Protection: 48K90U & 48K91U: Meets ANSI C37.90 Transient Specification. 48K01A: 2,500V for 1ms. Environmental Data Temperature Range: Storage: -25C to +85C. Operating: -25C to +60C. Mechanical Data Termination: 8 or 11-pin octal style plug. Enclosure: Grey plastic 1/16 DIN case for socket or panel mounting. Indicating LEDs: 48K90U & 48K91U: Power On LED & Output Contacts LED (Typically flashes when timing, stays on when output relay is energized.) 48K01A: Output Contacts LED Sockets: Fits either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 5 oz. (142g) approximately. Ordering Information - Authorized distributors are likely to stock boldface part numbers listed below. Part Number Timing Modes Operating Voltage Termination Pins 48K01AS One - On-Delay 120VAC 50/60 Hz. 8 48K90US Four - On-Delay, Interval, On/Interval, Repeat Cycle Universal (24-240VAC, 50/60 Hz. or 24-125VDC) 8 48K91US Eight - On-Delay, Off-Delay, Interval, On/Interval, One Shot, Repeat Cycle, On-Delay/Off-Delay, Accumulating On Universal (24-240VAC, 50/60 Hz. or 24-125VDC) 11 Ordering Note: The part numbers listed above are standard products with knobs for adjustment of mode, range and timing. On a special order basis other models are available with recessed dials requiring a screwdriver for adjustment. On the special order versions, the "S" part number suffix is replaced by an "R" suffix. Consult factory for availability of special order models. Outline Dimensions Wiring Diagrams (Bottom Views) (pins numbered clockwise from keyway) 1.89 (48.0) Max. 48K91US (dotted line represents internal connection) 1.89 (48.0) Max. Dimensions are shown for 1210 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 48K90US 48K01AS www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CNT series Multifunction, Digital Time Delay Relay/Counter * * * * * * * 10 programmable timing modes + 2 counting modes 0.1 sec. to 9,990 hr. programmable timing range 1 to 99,900 counting range LCD digital display Universal (24-240VAC/VDC) and fixed input types 10A output relay with DPDT contacts Thumbwheel switches for programming File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing and Counting Modes Input Data @ 25C See the following page for a complete description of all programmable timing and counting modes. Voltage: Universal Input Type: 24 - 240V 15%, 50/60 Hz. AC or DC. Fixed Input Types: 120VAC 15%, 50/60 Hz and 12VDC. Power Requirement: Universal Input Type: 10VA @ 240VAC; 5VA @ 120VAC; 1VA @ 24VAC. 10W @ 240VDC; 5W @ 120VDC; 1W @ 24VDC. Fixed Input Types: 3VA @ 120VAC; 3W @ 12VDC. Transient Protection: Yes. Reverse Voltage Protection: Yes. Timing Specifications Timing Ranges: 0.1 to 99.9 / 1 to 999 sec.; 0.1 to 99.9 / 1 to 999 min.; 0.1 to 99.9 / 1 to 999 / 10 to 9,990 hr. Timing Adjustment: Digital adjustment via thumbwheel switches. Tolerance: 0.5% 0.05 sec. Delta Time (for AC units add 1 cycle 60 Hz.): 0.1% 0.05 sec. Repeatability (Including first cycle of operation.): 0.1% 0.05 sec. Reset Time (power interruption): 45 ms, typ.; 60 ms, max. Minimum Pulse Width, Control: 50 ms. Recycle Time: 45 ms, typ.; 60 ms, max. Counting Specifications Maximum Count: 1 to 999; 10 to 9,990 (/10); 100 to 99,900 (/100). Maximum Count Rate: 100 counts per second. Mimumum Pulse Width:Count (Control): 3 ms.; Reset: 3 ms. Available Counting Functions: Operate at preset count and release at preset count. Contact Data @ 25C Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Initial Dielectric Strength Between Open Contacts: 1,000V rms, 60 Hz. Between All Other Conductors: 1,500V rms, 60Hz. Input Voltages & Limits @ 25C Input Type Nominal Voltage Minimum Voltage Maximum Voltage Universal Fixed 24-240VAC/VDC 120VAC 12VDC 20.4VAC/VDC 102VAC 10.2VDC 276VAC/VDC 138VAC 13.8VDC Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. Environmental Data Temperature Range: Storage: -20C to +70C. Operating: -10C to +55C. Humidity: 85% relative humidity, non-condensing. Mechanical Data Termination: 11-pin octal style plug. Enclosure: Beige plastic 1/16 DIN case. Sockets: Fits either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 4.3 oz. (122g) approximately. External Control: CONTROL, RESET: Active on contact closure or solid state switch closure to RETURN, 0-1.0VDC maximum voltage level (see wiring diagrams for interface circuits. Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Accessories Universal Input Model Input Voltage 24-240VAC/VDC Part Number Part Number CNT-35-96 SSA-24C667 Part Number 12VDC 120VAC CNT-35-26 CNT-35-76 Outline Dimensions Wiring Diagrams (Bottom Views) 1.88 (47.8) (pins numbered clockwise from keyway) 2.83 (71.9) EXTERNAL CONTROL SWITCHES** CONTROL (COUNT) .32 (8.1) RETURN O NC 1 1 H + Fits 1.77 x 1.77 (45 x 45) Panel cutout Dimensions are shown for reference purposes only. 3.15 (80.0) .64 (16.3) Dimensions are in inches over (millimeters) unless otherwise specified. RETURN USE SAME FOR RESET 1.76 (44.7) 1 RESET CONTROL RESET N 1.88 (47.8) A Description Ratchet-fit clip slides onto CNT from behind to secure CNT in panel mount applications. SSA-24C668 Protective Cover Clear, flexible cover slips snugly over bezel of CNT to help protect against dust and moisture. Durable cover also helps prevent inadvertant changes of programming switch settings. Fixed Input Models Input Voltage Name Mounting Clip 1 11 INPUT* _ + 1 11 INPUT* _ * Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". ** Important: A dry circuit switch is recommended. A "dry circuit" switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1211 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Protective Cover & Mounting Clip Dimensions SSA-24C668 SSA-24C667 Protective Cover "A " Mounting Clip 1.99 (50.5) .40 (10.2) 2.283 1.970 (58.0) (50.0) 2.047 (52.0) 1.99 (50.5) .591 (15.0) 1.654 (42.0) 1.890 (48.0) Section "A-A" "A " Programming Switch Diagram With this setting, the relay would operate after a delay period of 214 seconds. Function Select: Timer Mode: Counter Mode: A = Delay On Operate B = Delay On Release C = Interval On D = Control-Off Interval On B = Divide by 10 E = Recycle F = Single Cycle G = Control On-Off Interval On H = Control On-Off Delay C = Divide by 100 A 2 1 4 S I = Pulse J = Cumulative Delay On Operate A & D-J = Normal Count Time/Counter Setting: 001 to 999 Time Base/Counter Mode Select: Time Base: .1S = 0.1 to 99.9 Sec. .1M = 0.1 to 99.9 Min. .1H = 0.1 to 99.9 Hrs. S = 1 to 999 Sec. M = 1 to 999 Min. H = 1 to 999 Hrs. Counter Mode: CO = Operate at Preset Count CR = Release at Preset Count 10H =10 to 9990 Hrs. Timer Function Descriptions A . Delay On Operate Output relay turned on at end of programmed time interval which is started by CONTROL input or power-on with CONTROL on. Relay turned off by RESET input until next cycle is started. With CONTROL on, turning RESET off restarts timing B. Delay On Release Output relay turned on with CONTROL input and remains on for programmed time interval following removal of CONTROL. During time interval after release of CONTROL, RESET turns relay off until cycle restarted with reapplication of CONTROL. With CONTROL on, relay is held off while RESET is activated. C. Interval On Output relay turned on for programmed time interval by CONTROL or poweron with CONTROL on. RESET turns relay off until next cycle is started, and does not restart timing when RESET is removed. D. Control-Off Interval On Output relay turned on for programmed time interval by turn-off of CONTROL. RESET turns relay off until next cycle is started, and does not restart timing when RESET is removed. E. Recycle Output relay turned on at end of programmed time interval which is started by momentary CONTROL input or power-on with CONTROL on. Relay stays on for equal time interval, then turns off and cycle is repeated on a freerunning basis until terminated by momentary RESET, turning relay off. With CONTROL on, turning RESET off restarts cycle. F. Single Cycle Output relay turned on at end of programmed time interval which is started by momentary CONTROL input or power-on with CONTROL on. Relay stays on for equal time interval, then turns off. RESET terminates timing and turns relay off. Turning RESET off does not restart timing. G. Control On-Off Interval On (Watch Dog Timer) Output relay turned on and programmed time interval started or restarted by change of CONTROL input. RESET turns relay off and stops timing. Turning RESET off does not restart timing. H. Control On-Off Delay Output relay turned on at end of programmed timing interval which is started or restarted by change of CONTROL input. If relay is on, turn-off of relay occurs at end of programmed time interval which is started or restarted by change of CONTROL input. RESET turns relay off and stops timing. Turning RESET off does not restart timing. I. Pulse Output relay turned on at end of programmed time interval, which is started by CONTROL input, for 0.5 second duration, and continues in pulsed mode at programmed time interval with fixed 0.5 second on-time. Turning CONTROL off turns relay off and stops timing. RESET turns relay off and inhibits operation. With CONTROL on, removal of RESET restarts timing. J. Cumulative Delay On Operate Output relay turned on at completion of total accumulate CONTROL input duration equal to programmed time. Turning CONTROL off before accumulation of programmed time results in measured time total being held until CONTROL is again turned on and total programmed time value is reached. RESET input resets time value to zero and turns relay off if energized. Turning RESET off restarts timing if CONTROL is on. Counter Function Descriptions CO - Operate at Preset Count - Normal Mode CR - Release at Preset Count - Normal Mode After initializing by momentary activation of RESET input, each on/off signal at COUNT (CONTROL) input increments displayed count in upcounting manner from initial 000 value until preset count, set by thumbwheel switches, is reached and output relay turns on. Additional inputs continue to increment displayed count. Continued counting past maximum count (999) results in a "wrap-around" effect to 000, followed by contrinued up-counting. Activation of RESET input turns relay off and resets count to zero. Initializing by momentary activation of RESET input turns relay on. Operation is similar to CO (Operate at Preset Count) except relay turns off at a preset count. CO or CR - Divide-by-10 Mode Operation is as described previously, except count is incremented for every 10 on/off input signals for a maximum presettable count of 9,990. CO or CR - Divide-by-100 Mode Operation is as described previously, except count is incremented for every 100 on/off input signals for a maximum presettable count of 99,900. Dimensions are shown for 1212 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CNS series Multifunction Time Delay Relay * * * * * * 8 programmable timing modes (4 on 8-pin models) 0.1 sec. to 100 min. programmable timing range Universal (24-240VAC/VDC) and fixed input types 10A output relay with DPDT contacts DIP switch selection of timing mode and range Knob and dial scale for setting actual delay time File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25C See the following page for a complete description of timing modes. Voltage: Universal Input Type: 24 - 240V 15%, 50/60 Hz. AC or DC. Fixed Input Type: 120VAC 15%, 50/60 Hz. Power Requirement: Universal Input Type: 10VA @ 240VAC; 5VA @ 120VAC; 1VA @ 24VAC. 10W @ 240VDC; 5W @ 120VDC; 1W @ 24VDC. Fixed Input Type: 3VA @ 120VAC. Transient Protection: Yes. Reverse Voltage Protection: Yes. Timing Specifications Timing Ranges: 0.1 to 1.0 / 1.0 to 10 / 10 to 100 sec.; 0.1 to 1.0 / 1.0 to 10 / 10 to 100 min. Timing Adjustment: Knob adjustable within selected range. Tolerance: -0, +20% of max. specified at high end of timing range; min. specified, or less, at low end. Delta Time (for AC units add 1 cycle 60 Hz.): 10%. Repeatability (Including first cycle of operation.): 2% (for AC units add 1 cycle 60 Hz.). Reset Time (power interruption): 45 ms, typ.; 60 ms, max. Minimum Pulse Width, Control: 50 ms. Recycle Time: 45 ms, typ.; 60 ms, max. Input Voltages and Limits @ 25C Input Type Nominal Voltage Minimum Voltage Maximum Voltage Universal Fixed 24-240VAC/VDC 120VAC 20.4VAC/VDC 102VAC 276VAC/VDC 138VAC Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. Contact Data @ 25C Environmental Data Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10 A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Temperature Range: Storage: -20C to +70C. Operating: -10C to +55C. Humidity: 85% relative humidity, non-condensing. Initial Dielectric Strength Between Open Contacts: 1,000V rms, 60 Hz. Between All Other Conductors: 1,500V rms, 60 Hz. Mechanical Data Termination: 8- or 11-pin octal style plug. Enclosure: Beige plastic 1/16 DIN case. Dial scale provided for knob adjustment reference. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 4.3 oz. (122g) approximately. Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Universal Input Models Input Voltage Accessory Timing Functions No. of Pins Wiring Dia. Part Number 24-240VAC/VDC 24-240VAC/VDC 4 8 8 11 1 2 CNS-35-92 CNS-35-96 Part Number Name Description SSA-24C667 Mounting Clip Ratchet-fit clip slides onto CNS from behind to secure CNS in panel mount applications. Fixed Input Models Input Voltage Timing Functions No. of Pins Wiring Dia. Part Number 120VAC 120VAC 4 8 8 11 1 2 CNS-35-72 CNS-35-76 Outline Dimensions Wiring Diagrams (Bottom Views) (pins numbered clockwise from keyway) 1.88 (47.8) .65 (16.5) .32 (8.1) 2.83 (71.9) \ 1 1.76 (44.7) 1.88 (47.8) + 8 INPUT* 1 - + 11 INPUT* - EXTERNAL CONTROL SWITCH** * Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". Fits 1.77 x 1.77 (45 x 45) Panel Cutout Dimensions are shown for reference purposes only. 3.15 (80.0) Dimensions are in inches over (millimeters) unless otherwise specified. .64 (16.3) ** Important: A dry circuit switch is recommended. A "dry circuit" switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. The dotted lines shown between pins on 11-pin diagram indicate internal connections. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1213 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Mounting Clip Dimensions SSA-24C667 Mouting Clip 2.283 1.970 (58.0) (50.0) 2.047 (52.0) .591 (15.0) 1.654 (42.0) 1.890 (48.0) Timing Range Switch Settings DIP Switch Layout DIP Switch Setting On Timing Range DIP Switch Setting 0.1 - 1.0 Second 1 2 3 4 Function Setting 5 6 5 6 7 5 6 7 Time Setting 5 6 7 0.1 - 1.0 Minute 5 6 7 5 6 7 5 6 7 1.0 - 10 Seconds 7 Timing Range 1.0 - 10 Minutes 10 - 100 Seconds 10 - 100 Minutes Note: The solid black blocks in the DIP switch diagrams indicate the switch positions. For example, all the switches are "off" in the diagram above. Timing Function Descriptions and Switch Settings 8 Or 11 Pin 11 Pin Only Delay on Operate Delay on Release 1 2 3 4 1 72 & 92 - Output relay is energized at the completion of the time interval which is initiated by the application of input voltage. 76 & 96 - Same as the above except, closing the control switch after time out will deenergize the relay and reset the timer. Opening the switch will initiate another time interval. Closing the control switch during timing will reset the time to zero and inhibit timing until opened again. 2 3 4 76 & 96 - Output relay is energized by the closing of the control switch with the input applied or the application of input voltage with the control switch already closed. The time interval will be initiated by the opening of the control switch with the relay de-energizing at the completion of the time interval. Closing the control switch after time out will energize the relay in preparation for another time interval. Closing the control switch during timing will reset the time to zero and inhibit timing until opened again. Inverted Delay on Release Interval On (Input Controlled) 1 1 2 3 4 72 & 92 - Output relay is energized by the application of input voltage. The time interval is initiated at the same time with the relay de-energizing at the completion of the time interval. 76 & 96 - Same as above. Closing the control switch will have no effect on timing or the state of the relay. 2 3 3 4 Interval On (Switch Controlled) Recycler (Initially Off) 1 2 72 & 92 - No Time Delay - Instantly On 76 & 96 - Output relay will energize with the application of the input voltage when the control switch is open. Control switch closing will de-energize the relay. A timing interval will be initiated with the opening of the control switch, at the completion of which the relay willenergize. With the control switch closed upon application of input voltage, the relay will wait until the control switch is opened to initiate a time interval after which the relay will energize. Closing of the control switch during timing will reset the time to zero and inhibit timing until opened again. 4 72 & 92 - Output relay will begin cycling at a 50% duty cycle with the application of input power. The initial state of the relay will be de-energized. 76 & 96 - Same as the above except, closing the control switch will de-energize the relay and inhibit timing until it is once again opened, at which time it will start from zero time. 1 2 3 4 76 & 96 - Output relay is energized by the application of input voltage with the control switch closed or the closing of the control switch with the input applied. Immediately upon either, timing is initiated with the relay de-energizing at the completion of the time interval. Closing the control switch after time out will reset the timer, energize the relay, and initiate another time interval. Closing the control switch during timing will have no effect on timing or the state of the relay. Interval Off Recycler (Initially On) 1 2 3 4 72 & 92 - Output relay will begin cycling at a 50% duty cycle with the application of input power. The initial state of the relay will be energized. 76 & 96 - Same as the above except, closing the control switch will energize the relay and inhibit timing until it is once again opened, at which time it will start from zero time. Dimensions are shown for 1214 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 1 2 3 4 76 & 96 - Output relay will initially be energized with the application of the input voltage when the control switch is open. Control switch closing will de-energize the relay and start a time interval. At the completion of the time interval, the relay will energize. With the control switch closed upon application of input voltage, a time interval will be initiated after which the relay will energize. Closing of the control switch during timing will have no effect on timing or the state of the relay. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CNM5 series Multifunction Time Delay Relay For Plug-In or Panel Mounting * * * * * * Five timing functions selectable via rotary switch 0.1 sec. to 9,990 hr. timing range Fixed input type (120VAC 15%) 10A output relay with DPDT contacts 1/16 DIN style enclosure with 11-pin plug-in base Thumbwheel switches for programming delay time File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Functions Initial Dielectric Strength See the following page for a complete description of timing functions. Between Output Poles: 1,500V rms, 60 Hz. Between Input and Output: 1,500V rms, 60Hz. Input Data @ 25C Timing Specifications Timing Ranges: 0.1 to 99.9 / 1 to 999 sec.; 0.1 to 99.9 / 1 to 999 min.; 0.1 to 99.9 / 1 to 999 / 10 to 9,990 hr. Timing Adjustment: Digital adjustment via thumbwheel switches. Tolerance: 0.05% 0.04 sec.* Repeatability (Including first cycle of operation.): < 0.05% 0.04 sec.* Reset Time (power interruption): 45 ms, typ.; 60 ms, max. Minimum Pulse Width, Control: 50 ms. * Timing is synchronized with input voltage frequency. Accuracy is dependent on input voltage frequency. Tolerance shows maximum variation from utility companies. Contact Data @ 25C Arrangement: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Voltage: 120VAC 15%, 60 Hz. Power Requirement: 3VA @ 120VAC. Transient Protection: 13 Joule MOV. Input Voltage & Limits Nominal Voltage Minimum Voltage Maximum Voltage 120VAC 102VAC 138VAC Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -10C to +55C. Humidity: 85% relative humidity, non-condensing. Mechanical Data Termination: 11-pin octal style plug. Enclosure: Black plastic 1/16 DIN (48mm x 48mm) case. Sockets: Fits either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 4.3 oz. (122g) approximate. Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Time Delay Relay Accessory Input Voltage Part Number 120VAC CNM5 Outline Dimensions Part Number Name Description SSA-24C667 Mounting Clip Ratchet-fit clip slides onto CNM5 from behind to secure CNM5 in panel mount applications. Mounting Clip Dimensions 1.88 (47.8) .32 (8.1) SSA-24C667 2.83 (71.9) Mounting Clip 1.88 (47.8) 1.76 (44.7) 3 1 2 S 3.15 (80.0) .560 (14.2) .64 (16.3) Fits 1.77 x 1.77 (45 x 45) panel cutout. Wiring Diagrams (Bottom Views) 2.283 1.970 (58.0) (50.0) 2.047 (52.0) .591 (15.0) 1.654 (42.0) 1.890 (48.0) (pins numbered clockwise from keyway) EXTERNAL CONTROL SWITCH** CONTROL 1 11 INPUT Optional Solid State Input Interface 1 11 INPUT **Important: A dry circuit switch is recommended. A "dry circuit" switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1215 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Timer Function Descriptions Repeat: Output relay is turned on at end of programmed time interval which is started by application of input power. Relay stays on for equal time interval, then turns off and cycle is repeated on a free-running basis with equal on and off times until terminated by removal of input power. LED is flashing when output relay is off and on continuously when the relay is on. Applying CONTROL input during timing will have no effect on timing or the state of the relay. LED to show time status. See functional explanation for details. One Shot: Output relay is turned on by applying CONTROL input with input voltage present or application of input voltage with the CONTROL input on. Immediately upon either, timing is initiated with the output relay turning off at the completion of the selected time interval. Applying CONTROL input after time out will reset the timer, turn on the output relay and initiate another time interval. LED is on continuously when output relay is off and flashes when the relay is on. Applying CONTROL input during timing will have no effect on timing or the state of the relay. REPEAT ONE SHOT OFF DELAY INTERVAL ON DELAY 3 1 2 TIME SET 000 TO 999 Off Delay: Output relay is turned on by applying CONTROL input with input voltage present or application of input voltage with the CONTROL input on. The time interval will be started by removing the CONTROL input with the output relay turning off at completion of the time interval. Reapplying the CONTROL during timing will reset the time to zero and inhibit timing until removed. LED is off when CONTROL input is on, flashing during timing and on continuously when the output relay is off. S TIME BASE Interval: Output relay is turned on for a programmed time interval by applying input voltage. LED flashes when output relay is on and is on continuously when the output relay is off. Applying CONTROL input will have no effect on timing or the state of the relay. Time Base: .1 S S .1 M M .1 H H 10 H = = = = = = = 1/10 Seconds Seconds 1/10 Minutes Minutes 1/10 Hours Hours 10 Hours Dimensions are shown for 1216 reference purposes only. Timing Range 0.1 to 99.9 Seconds Timing Range 1 to 999 Seconds Timing Range 0.1 to 99.9 Minutes Timing Range 1 to 999 Minutes Timing Range 0.1 to 99.9 Hours Timing Range 1 to 999 Hours Timing Range 10 to 9990 Hours Dimensions are in inches over (millimeters) unless otherwise specified. On Delay: Output relay is off for a programmed time interval which is started by applying input voltage. LED flashes when output relay is off and is on continuously when the output relay is on. Applying CONTROL input will have no effect on timing or the state of the relay. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SSF series Programmable Time Delay Relay * * * * * * * 4 user-programmable timing modes 0.1 sec. to 10 hr. programmable timing range Parameters set with recessed screwdriver dials Universal voltage (plug-in relay dependent) 10A DPDT replaceable output relay minimizes downtime Front screw terminals DIN-rail, panel or machine tool track mount File E15631 File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Initial Dielectric Strength Modes are user selectable via screwdriver adjustment of recessed 4position selector dial. Modes offered are: On-Delay, Off-Delay, Interval and Latching Interval. Between Coil/Control Switch and Contacts: 1,500VAC for one minute. Input Data @ 25C Timing Specifications Timing Ranges: 0.1 to 3 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10 hr. Timing Range Selection: Screwdriver select via recessed 8-position selector dial. Timing Adjustment: Recessed potentiometer adjustment with reference calibrations. Accuracy: Repeat Accuracy: 1% 0.01 sec. Overall Accuracy: 3% 0.01 sec. Reset Time: 30 ms. Relay Operate Time: On-Delay and Interval mode: 30 ms. Relay Release Time: Off-Delay, Interval and Latching Interval: 30 ms. (with factory-installed relay). Contact Data @ 25C Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC 345VA. Expected Mechanical Life: 10 million operations (with factory-installed relay). Expected Electrical Life: 500,000 operations, min., at rated resistive load( with factory-installed relay). Outline Dimensions 2.67 (68) 0.188 (5) WIDE SLOT FOR #8 OR M4 MACHINE SCREW 2.19 (56) 1.095 (28) 0.342 (9) DIN TRACK MOUNT 3.125 (79) HOLE PATTERN FOR SCREW MOUNT 2 3 1 4 5 6 3.81 (97) 7 8 Voltage: See Ordering Information section for details. Power Requirement: 2W, max. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 24, 48 VAC/VDC 1,000V 480V 120, 240VAC/VDC 3,000V 2500V* * Min. source impedance of 100 ohm@120/240VAC, 3000V <0.1 , sec. Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -30C to +65C. Mechanical Data Mounting/Termination: Panel, DIN-rail, Machine Tool mounting track mounting case with screw terminals. Weight: 5.5 oz. (156g) approximately. Ordering Information SSF | R | Series SSF R = UL Operating Mode 90 Universal Recognized Multiple modes Timer Component On-Delay Off-Delay Interval Latching Interval 9 10 0.343 (9) 6-32 CAPTIVE CLAMP SCREWS Wiring Diagram (Top View) 0.322 (8) 90 | A | Operating Voltage (+10%, -15%) A = 120VAC, 50/60 Hz. B = 240VAC, 50/60 Hz. E = 24VAC, 50/60 Hz. F = 48VAC, 50/60 Hz. N = 48VDC O =24VDC P = 125VDC X = No factoryinstalled relay. Voltage determined by customer-supplied relay. Only relays that operate on the above-listed voltages should be used. Timer operation using other relay voltages is not recommended. Authorized distributors are likely to stock the following: SSFR90A SSFR90X Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1217 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SCF series Programmable Time Delay Relay * * * * * * 4 user-programmable timing modes 0.1 sec. to 10 hr. programmable timing range Parameters set with recessed dials Narrow width saves panel space 10A DPDT output relay Socket can be DIN-rail or back panel mounted File E15631(relay) and E140494 (socket) File LR29186 (relay) and LR29513M7 (socket) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25C Modes are user selectable via screwdriver adjustment of recessed 4position selector dial. Modes offered are: On-Delay, Off-Delay, Interval and Latching Interval. Voltage: See Ordering Information section for details. Power Requirement: 2W, max. Timing Specifications Timing Ranges: 0.1 to 3 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10 hr. Timing Range Selection: Screwdriver select via recessed 8-position selector dial. Timing Adjustment: External knob potentiometer adjustment with reference calibrations. Accuracy: Repeat Accuracy: 1% 0.01 sec. Overall Accuracy: 3% 0.01 sec. Reset Time: 30 ms. Relay Operate Time: On-Delay and Interval mode: 55 ms. Relay Release Time: Off-Delay, Interval and Latching Interval: 40 ms. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12VDC 1,000V 240V* 24VAC/VDC 1,000V 240V* 48 VAC/VDC 1,000V 480V* 120 VAC, 125VDC 3,000V 2,500V* 240VAC/VDC 3,000V 2,500V* * Minimum source impedance of 100 ohm. Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -30C to +65C. Contact Data @ 25C Mechanical Data Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC; 345VA. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 500,000 operations, min., at rated resistive load. Mounting/Termination: 11-pin octal-type plug for use with mating socket. Mount relay in horizontal position (pins horizontal, knob down, LEDs up). Status Indication: Power On LED and Output Contacts LED. Weight: Relay: 3.5 oz. (156g) approx.; Socket: 1.7 oz. (48.3g) approx. Initial Dielectric Strength Between Terminals and Case: 1,000VAC plus twice the nominal voltage for one minute. Outline Dimensions M3 X 0.5 CAPTIVE CLAMP SCREWS .84 (21) CLEARANCE HOLE FOR M4 OR #8 MACHINE SCREW 3.29 (84) 1.38 (35) 1.645 (42) 0.372 (10) 1.42 (36) 0.71 (18) SCF TIMER .21 (5) .109 (3) DIA. ANTI-ROTATION PIN BETWEEN TERMS 10 & 2 Ordering Information RX 90 | | Series SCF | Operating Mode | Plug-In = Multiple Modes | 90 Programmable On-Delay | Off-Delay Timer | Interval | Latching Interval | SCF | Mounting RX = Without Socket RF = With Socket BCSF11SC SOCKET Wiring Diagram (Bottom View) 2 | | | | | | | | A | Output Rating A = 10 Amp B = 5 Amp Output A | | | | | | | | Operating Voltage (+10%, -15%) 2 = DPDT Relay A = 120VAC, 50/60 Hz. / 125VDC B = 240VAC, 50/60 Hz. E = 24VAC, 50/60 Hz. / 24VDC F = 48VAC, 50/60 Hz. / 24VDC Q = 12VDC Voltage Option B is only available with 5 Amp output option. Authorized distributors are likely to stock the following: None at present. Dimensions are shown for 1218 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CN1 series On Delay, Time Delay Relay For Plug-In or Panel Mounting * * * * * 0.1 sec. to 9,990 hr. timing range Fixed input type (120VAC 15%) 10A output relay with DPDT contacts 1/16 DIN style enclosure with 8-pin plug-in base Thumbwheel switches for programming delay time File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Function Initial Dielectric Strength On Delay - Output relay turns on at the end of a programmed time interval which is started by applying input voltage. LED flashes when output relay is off and is on continuously when the output relay is on. Removal of input voltage turns off output relay. Reapplying input voltage resets the unit. Between Output Poles: 1,500V rms, 60 Hz. Between Input and Output: 1,500V rms, 60Hz. INPUT VOLTAGE N.O. RELAY CONTACTS Input Data @ 25C ON OFF ON OFF TIME Voltage: 120VAC 15%, 60 Hz. Power Requirement: 3VA @ 120VAC. Transient Protection: 13 Joule MOV. Timing Specifications Input Voltage & Limits Timing Ranges: 0.1 to 99.9 / 1 to 999 sec.; 0.1 to 99.9 / 1 to 999 min.; 0.1 to 99.9 / 1 to 999 / 10 to 9,990 hr. Timing Adjustment: Digital adjustment via thumbwheel switches. Tolerance: 0.05% 0.04 sec.* Repeatability (Including first cycle of operation.): < .05% 0.04 sec.* Reset Time (power interruption): 45 ms, typ.; 60 ms, max. * Timing is synchronized with input voltage frequency. Accuracy is dependent on input voltage frequency. Tolerance shows maximum variation from utility companies. Nominal Voltage Minimum Voltage Maximum Voltage 120VAC 102VAC 138VAC Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -10C to +55C. Humidity: 85% relative humidity, non-condensing. Contact Data @ 25C Arrangement: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Mechanical Data Termination: 8-pin octal style plug. Enclosure: Black plastic 1/16 DIN (48mm x 48mm) case. Sockets: Fits either 27E122 or 27E891 (snap-on) screw terminal sockets. Weight: 4.3 oz. (122g) approximate. Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Time Delay Relay Accessory Input Voltage Part Number 120VAC CN1 Name Description SSA-24C667 Mounting Clip Ratchet-fit clip slides onto CN1 from behind to secure CN1 in panel mount applications. Mounting Clip Dimensions Outline Dimensions 1.88 (47.8) Part Number .32 (8.1) SSA-24C667 2.83 (71.9) Mounting Clip 1.88 (47.8) 1.76 (44.7) 3 1 2 S Fits 1.77 x 1.77 (45 x 45) panel cutout. 3.15 (80.0) 2.283 1.970 (58.0) (50.0) 2.047 (52.0) .591 (15.0) 1.654 (42.0) 1.890 (48.0) .64 (16.3) Wiring Diagram (Bottom View) (pins numbered clockwise from keyway) 1 .1 S S .1 M M .1 H H 10 H 8 INPUT Dimensions are shown for reference purposes only. Time Base Dimensions are in inches over (millimeters) unless otherwise specified. = = = = = = = 1/10 Seconds Seconds 1/10 Minutes Minutes 1/10 Hours Hours 10 Hours Timing Range 0.1 to 99.9 Seconds Timing Range 1 to 999 Seconds Timing Range 0.1 to 99.9 Minutes Timing Range 1 to 999 Minutes Timing Range 0.1 to 99.9 Hours Timing Range 1 to 999 Hours Timing Range 10 to 9990 Hours Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1219 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CG series CMOS IC Time Delay Relay * Repeatability to .05% * Choice of timing modes - Delay on operate - Delay on release - Interval on * Knob adjustable * 10A output relay with DPDT contacts * Various models time from 0.5 sec. to 100 min. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Contact Data @ 25C Timing Modes Delay on operate - Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. ON OFF N.O. RELAY CONTACTS ON OFF INPUT VOLTAGE Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. TIME Initial Dielectric Strength Delay on release - Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch. Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. CONTROL SWITCH Input Data @ 25C ON OFF N.O. RELAY ON CONTACTS OFF TIME Interval on - The relay energizes and timing begins when input voltage is applied. At the end of the time delay period the relay will de-energize. Reset is accomplished by removing, then reapplying, the input voltage. INPUT VOLTAGE ON OFF Voltage: 120VAC and 24VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Transient Protection: Yes. Reverse Voltage Protection: Yes. Input Voltages & Limits @25C Voltage Type Nominal Voltage Minimum Voltage Maximum Voltage AC DC 120 24 105 20 130 32 Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. N.O. RELAY ON CONTACTS OFF TIME Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -10C to +55C. Timing Specifications Timing Ranges: From 0.5 to 5.0 sec. through 10 to 100 min. Timing Adjustment: Knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types:-0, +10% of max. specified at high end of timing range; +0, -10% of min. specified at low end. Delta Time (for AC units add 1 cycle 60 Hz.): 2%, typ.; 5%, max. Repeatability (including first cycle of operation): AC: 0.1%, typ.; 0.5%, max.; but not less than 16 ms. DC: 0.05% typ.; 0.1% max.; but not less than 3 ms. Release Time: 30 ms, typ.; 45 ms, max. Recycle Time: AC: 40 ms, typ.; 60 ms, max. DC: 30 ms, typ.; 45 ms, max. Dimensions are shown for 1220 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: 8- or 11-pin octal style plug. Enclosure: Yellow plastic case. Knob adjustable types have dial scale for reference only. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 8 oz. (227g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Voltage 120VAC 24VDC Time Delay on Release Models Adjustment 0.5 to 5 Min. 1 to 10 Min. 5 to 50 Min. 10 to 100 Min. 5 to 50 Min. Wiring Dia. Knob 1 Knob 1 Part Number Voltage CGB-38-70005M CGB-38-70010M CGB-38-70050M CGB-38-70100M 120VAC CGD-38-30050M Time Adjustment Wiring Dia. Part Number Knob 2 CGB-38-78010M CGB-38-78050M 1 to 10 Min. 5 to 50 Min. Interval on Models Voltage Adjustment Wiring Dia. Part Number 120VAC 0.5 to 5 Sec. 1 to 10 Min. Time Knob 1 CGB-38-79005S CGB-38-79010M 24VDC 1 to 10 Min. Knob 1 CGD-38-39010M Outline Dimensions 2.406 MAX. (61.1) 2.937 MAX. (74.6) .56 (14.2) .60 (15.2) 1.781 MAX. (45.2) Fig.1 8 Pin + INPUT _ (DC POLARITY INDICATED) Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) EXT. CONT. SW* _ + INPUT (DC POLARITY INDICATED) Fig.2 11 Pin * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: a dry circuit switch is recommemded. A "dry circuit" switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1221 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CD series CMOS IC Time Delay Relay 1% Repeatability Operates from -40C to +55C Delay on operate or delay on release timing modes Fixed, knob or resistor adjustable types - Calibrated dial on knob adjustable types * 10A output relay with SPDT or DPDT contacts * Various models time from 0.1 to 180 sec. * * * * File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Initial Dielectric Strength Delay on operate - Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. ON OFF N.O. RELAY CONTACTS ON OFF INPUT VOLTAGE TIME Input Data @ 25C Delay on release - Input voltage must be applied continuously to operate the internal relay. When control Input is applied, the relay energizes. When control input is removed, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by reapplying control input. ON OFF N.O. RELAY ON CONTACTS OFF CONTROL INPUT TIME Voltage: 24 & 120VAC and 12 through 110VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Transient Protection: Yes. Reverse Voltage Protection: Yes. Input Voltages & Limits @ 25C Voltage Type Nominal Voltage Minimum Voltage Maximum Voltage AC 24 120 12 24 48 110 20 105 11 20 41 95 28 130 13 32 55 125 DC Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. Timing Specifications Timing Ranges: From 0.1 to 180 sec. Timing Adjustment: Fixed, external resistor and knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types: 5% of max. specified at high end of timing range; min. specified, or less, at low end; 10% full scale. Fixed Types: 5%. Res. Adj. Types: 5% at high end of timing range; min. specified, or less, at low end. Delta Time (for AC units add 1 cycle 60 Hz.): 5%. Repeatability (for AC units add 1 cycle 60 Hz.): 1%. Release Time: 45 ms, typ.; 60 ms, max. Recycle Time: 45 ms, typ.; 60 ms, max. Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Dimensions are shown for Temperature Range: Storage: -55C to +85C. Operating: -40C to +55C. Mechanical Data Contact Data @ 25C 1222 reference purposes only. Environmental Data Dimensions are in inches over (millimeters) unless otherwise specified. Termination: 8- or 11-pin octal style plug. Enclosure: Yellow plastic case. Knob adjustable types have dial scale calibrated in seconds 5%. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 8 oz. (227g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Voltage 120VAC Time Delay on Release Models Adjustment 0.1 to 1 Sec. 0.1 to 5 Sec. 0.1 to 10 Sec. 0.3 to 30 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. Wiring Dia. Knob Part Number Voltage CDB-38-70001 CDB-38-70002 CDB-38-70003 CDB-38-70006 CDB-38-70004 CDB-38-70005 1 120VAC Time Adjustment 0.1 to 1 Sec. 0.1 to 5 Sec. 0.1 to 10 Sec. 0.3 to 30 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. Wiring Dia. Knob 3 Part Number CDB-38-70016 CDB-38-70091 CDB-38-70014 CDB-38-70092 CDB-38-70012 CDB-38-70015 120VAC 1 Sec. Fixed CDA-38-70012 120VAC 1 Sec. Fixed 3 CDA-38-70025 180 Sec. Fixed 3 CDC-38-20026 Resistor CDF-38-70001 CDF-38-70002 CDF-38-70003 12VDC 120VAC 0.1 to 1 Sec. 0.1 to 5 Sec. 0.1 to 10 Sec. 24VDC Knob 3 Knob 1 CDD-38-30003 CDD-38-30004 CDD-38-30005 CDD-38-30014 CDD-38-30012 CDD-38-30008 24VDC 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. 48VDC 0.6 to 60 Sec. Knob 1 CDD-38-40002 Knob 1 110VDC 0.1 to 1 Sec. 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. 2 CDD-38-60004 CDD-38-60001 CDD-38-60002 CDD-38-60003 Outline Dimensions 2.406 MAX. (61.1) 2.937 MAX. (74.6) .56 (14.2) .60 (15.2) 1.781 MAX. (45.2) Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) CONTROL INPUT* _ EXTERNAL RESISTOR + _ INPUT (DC POLARITY INDICATED)** _ INPUT (DC POLARITY INDICATED)** _ SUPPLY INPUT (DC POLARITY INDICATED)** Fig. 1 8 Pin Fig. 2 11 Pin Fig. 3 11 Pin + + + * If control input is applied when supply input is applied, relay will immediately energize. A 50 millisecond minimum control pulse is required. ** Note Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". External Resistor Selection Chart See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1223 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CK series Mid-Priced CMOS IC Time Delay Relay * Choice of timing modes - Delay on operate - Delay on release - Delay on dropout (no input required during timing) - Interval on * Knob or resistor adjustable types * 10A output relay with DPDT contacts * Various models time from 0.1 to 180 sec. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Contact Data @ 25C Timing Modes Delay on operate - Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. ON OFF ON OFF INPUT VOLTAGE N.O. RELAY CONTACTS TIME Delay on release - Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch. ON OFF N.O. RELAY CONTACTS ON OFF CONTROL SWITCH TIME Delay on dropout - The relay operates immediately upon application of input voltage. Timing begins when input voltage is removed. When timing is complete, the relay will de-energize. Reset occurs when input voltage is reapplied. ON OFF ON OFF INPUT VOLTAGE N.O. RELAY CONTACTS TIME Interval on (with control switch) - Input voltage must be applied continuously to operate the internal relay. The relay energizes and timing begins when the external switch is closed. At the end of the time delay period the relay will de-energize. Reset is accomplished by opening and reclosing the control switch. ON OFF N.O. RELAY CONTACTS ON OFF TIME Input Data @ 25C Voltage: 24 & 120VAC and 12 & 24VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Initiate Time: Delay on dropout timers must have input voltage applied for a minimum of three seconds for dropout function to be guaranteed. Transient Protection: Yes. Reverse Voltage Protection: Yes. Input Voltages & Limits @ 25C Voltage Type Nominal Voltage Minimum Voltage Maximum Voltage AC 24 120 12 24 20 105 11 20 28 130 13 32 DC Environmental Data Timing Ranges: From 0.1 to 180 sec. Timing Adjustment: External resistor and knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types:-0, +20% of max. specified at high end of timing range; min. specified, or less, at low end. Fixed Types: 5%. Res. Adj. Types: 5% at high end of timing range; min. specified, or less, at low end. Delta Time (for AC units add 1 cycle 60 Hz.): 10%. Repeatability (for AC units add 1 cycle 60 Hz.): 2%. Release Time: 60 ms, typ.; 100 ms, max. Recycle Time: 60 ms, typ.; 100 ms, max. Dimensions are shown for Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. Timing Specifications 1224 reference purposes only. Initial Dielectric Strength Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. CONTROL SWITCH Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Dimensions are in inches over (millimeters) unless otherwise specified. Temperature Range: Storage: -55C to +85C. Operating: -10C to +55C. Mechanical Data Termination: 8- or 11-pin octal style plug. Enclosure: White plastic case. Knob adjustable types have dial scale for reference only. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 6 oz. (170g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Delay On Release Models Delay On Operate Models Voltage Time 24VAC 0.1 to 10 Sec. 120VAC 0.1 to 10 Sec. 0.6 to 60 Sec. 1.2 to 120 Sec. 1.8 to 180 Sec. Adjustment Wiring Dia. Part Number Knob 1 CKB-38-30010 Knob 1 CKB-38-70010 CKB-38-70060 CKB-38-70120 CKB-38-70180 120VAC 0.1 to 10 Sec. Resistor 2 CKF-38-70010 12VDC 0.1 to 10 Sec. Knob 1 CKD-38-20010 Voltage Time 120VAC 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. Adjustment Wiring Dia. Part Number Knob 3 CKB-38-78010 CKB-38-78060 CKB-38-78180 120VAC 24VDC 0.1 to 10 Sec. Resistor 4 CKF-38-78010 0.1 to 10 Sec. Resistor 4 CKH-38-38010 Adjustment Wiring Dia. Part Number Knob 1 CKB-38-37010 CKB-38-37060 Knob 1 CKB-38-77010 CKB-38-77060 CKB-38-77120 Adjustment Wiring Dia. Part Number Knob 3 CKB-38-79010 Delay On Dropout Models Voltage 24VAC 120VAC Time 0.1 to 10 Sec. 0.6 to 60 Sec. 0.1 to 10 Sec. 0.6 to 60 Sec. 1.2 to 120 Sec. Interval On Models Voltage Time 120VAC 0.1 to 10 Sec. Outline Dimensions 2.406 MAX. (61.1) 2.937 MAX. (74.6) .56 (14.2) .60 (15.2) 1.781 MAX. (45.2) Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) EXTERNAL RESISTOR EXTERNAL RESISTOR INPUT (DC POLARITY INDICATED)** Fig.1 8 Pin Fig. 2 11 Pin Fig. 3 11 Pin _ + INPUT (DC POLARITY INDICATED)** + + CONTINUOUS SUPPLY INPUT (DC POLARITY INDICATED)** _ + _ EXTERNAL CONTROL SWITCH* _ CONTINUOUS SUPPLY INPUT (DC POLARITY INDICATED)** Fig. 4 11 Pin EXTERNAL CONTROL SWITCH* * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A "dry circuit" switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". External Resistor Chart See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1225 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CH series Mid- To Low-Priced CMOS IC Time Delay Relay * Choice of timing modes - Delay on operate - Delay on release - Interval on * Fixed or knob adjustable types * 10A output relay with DPDT contacts * Various models time from 1 to 180 sec. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Contact Data @ 25C Timing Modes Delay on operate - Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. INPUT VOLTAGE ON OFF N.O. RELAY ON CONTACTS OFF Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. TIME Initial Dielectric Strength Delay on release - Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch. CONTROL SWITCH ON OFF N.O. RELAY ON CONTACTS OFF TIME Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. Input Data @ 25C Voltage: 24 through 240VAC and 24VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Transient Protection: Yes. Reverse Voltage Protection: Yes. Input Voltages & Limits @ 25C Interval on - The relay energizes and timing begins when input voltage is applied. At the end of the time delay period the relay will de-energize. Reset is accomplished by removing, then reapplying, the input voltage. INPUT VOLTAGE ON OFF N.O. RELAY ON CONTACTS OFF Voltage Type Nominal Voltage Minimum Voltage Maximum Voltage AC 24 120 240 24 20 105 210 20 28 130 260 32 DC Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. TIME Environmental Data Timing Specifications Timing Ranges: From 1 to 180 sec. Timing Adjustment: Fixed and knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types:-0, +20% of max. specified at high end of timing range; min. specified, or less, at low end. Fixed Types: 5%. Res. Adj. Types: 5% at high end of timing range; min. specified, or less, at low end. Delta Time (for AC units add 1 cycle 60 Hz.): 10%. Repeatability (for AC units add 1 cycle 60 Hz.): 2%. Release Time: 125 ms, typ.; 200 ms, max. Recycle Time: 125 ms, typ.; 200 ms, max. Dimensions are shown for 1226 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Temperature Range: Storage: -55C to +85C. Operating: -10C to +55C. Mechanical Data Termination: 8- or 11-pin octal style plug. Enclosure: White plastic case. Knob adjustable types have dial scale for reference only. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 6 oz. (170g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Voltage Time 24VAC 1 to 10 Sec. 1 to 180 Sec. Delay on Release Models Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number Knob 1 CHB-38-30001 CHB-38-30003 24VAC 1 to 10 Sec. Knob 3 CHB-38-30011 120VAC 1 to 10 Sec. 1 to 60 Sec. 1 to 180 Sec. Knob 3 CHB-38-70011 CHB-38-70012 CHB-38-70013 Knob 3 Adjustment Wiring Dia. Part Number 120VAC 1 to 10 Sec. 1 to 60 Sec. 1 to 180 Sec. Knob 1 CHB-38-70001 CHB-38-70002 CHB-38-70003 120VAC 10 Sec. Fixed 1 CHA-38-70001 240VAC 1 to 10 Sec. Knob 1 CHB-38-80001 24VDC 1 to 10 Sec. 1 to 60 Sec. 1 to 180 Sec. Knob 1 CHD-38-30001 CHD-38-30002 CHD-38-30003 24VDC 1 to 10 Sec. 1 to 180 Sec. CHD-38-30011 CHD-38-30013 Interval on Models Voltage Time 120VAC 1 to 10 Sec. 1 to 60 Sec. 1 to 180 Sec. Knob 1 CHB-38-70021 CHB-38-70022 CHB-38-70023 24VDC 1 to 10 Sec. Knob 1 CHD-38-30021 Outline Dimensions 2.406 MAX. (61.1) 2.937 MAX. (74.6) .56 (14.2) .60 (15.2) 1.781 MAX. (45.2) Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) EXTERNAL RESISTOR Fig. 2 11 Pin Fig. 1 8 Pin + INPUT (DC POLARITY INDICATED) _ + INPUT _ (DC POLARITY INDICATED) EXT SWITCH* + - AC INPUT Fig. 3 11 Pin * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A "dry circuit" switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1227 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CB series CMOS IC Time Delay Relay * Choice of timing modes - Delay on operate - Delay on release - Interval on with or without control switch * Knob adjustable * 10A output relay with SPDT or DPDT contacts * Various models time from 0.1 sec. to 100 min. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Contact Data @ 25C Timing Modes Delay on operate - Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. INPUT VOLTAGE ON OFF N.O. RELAY ON CONTACTS OFF TIME Delay on release - Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch. CONTROL SWITCH Initial Dielectric Strength Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. ON OFF N.O. RELAY ON CONTACTS OFF TIME Interval on (without control switch) - The relay energizes and timing begins when input voltage is applied. At the end of the time delay period the relay will de-energize. Reset is accomplished by removing, then reapplying, the input voltage. INPUT VOLTAGE Arrangements: 2 Form C (DPDT), except 8-pin delay on release model has 1 Form C (SPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. ON OFF Input Data @ 25C Voltage: 24 and 120VAC, and 12 and 24VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Transient Protection: Yes. Reverse Voltage Protection: Yes. Input Voltages & Limits @ 25C N.O. RELAY ON CONTACTS OFF TIME Interval on (with control switch) - Input voltage must be applied continuously to operate the internal relay. The relay energizes and timing begins when the external switch is closed. At the end of the time delay period the relay will de-energize. Reset is accomplished by opening and reclosing the control switch. CONTROL SWITCH Maximum Voltage AC 24 120 12 24 20 105 11 20 28 130 13 32 DC Environmental Data Timing Ranges: From 0.1 to 1.0 sec. through 10 to 100 min. Timing Adjustment: Knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types: -0, +30% of max. specified at high end of timing range; min. specified, or less, at low end. Fixed Types: 10%. Res. Adj. Types: 10% at high end of timing range; min. specified, or less, at low end. Delta Time (for AC units add 1 cycle 60 Hz.): 10%. Repeatability (for AC units add 1 cycle 60 Hz.): 2%. Release Time: 60 ms, typ.; 100 ms, max. Recycle Time: 60 ms, typ.; 100 ms, max. Dimensions are shown for Minimum Voltage TIME Timing Specifications 1228 reference purposes only. Nominal Voltage Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. ON OFF N.O. RELAY ON CONTACTS OFF Voltage Type Dimensions are in inches over (millimeters) unless otherwise specified. Temperature Range: Storage: -55C to +85C. Operating: -10C to +55C. Mechanical Data Termination: 8- or 11-pin octal style plug. Enclosure: White plastic case. Knob adjustable types have dial scale for reference only. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 6 oz. (170g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Voltage Time 24VAC 0.1 to 10 Sec. 1.8 to 180 Sec 120VAC 12VDC Wiring Dia. Part Number Voltage Time Knob 1 CB-1041B-30 CB-1042B-30 24VAC 0.1 to 10 Sec. 1.8 to 180 Sec 0.1 to 1 Sec. 0.1 to 5 Sec. 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. 1 to 10 Min. 10 to 100 Min. Knob 0.1 to 10 Sec. Knob 0.1 to 1 Sec. 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. 24VDC Delay on Release Models Adjustment CB-1001B-70 CB-1002B-70 CB-1003B-70 CB-1004B-70 CB-1005B-70 CB-1006B-70 CB-1007B-70 1 1 Knob CB-1047D-20 120VAC 24VDC 0.1 to 10 Sec. 1.8 to 180 Sec. Wiring Dia. Part Number Knob 3 CB-1045B-38 CB-1046B-38 3 5 3 3 CB-1021B-78 CB-1022B-78 CB-1023B-78 CB-1024B-78 Knob 3 CB-1038D-38 CB-1039D-38 Adjustment Wiring Dia. Part Number Knob 1 CB-1043B-39 Knob 1 1 1 CB-1011B-79 CB-1014B-79 CB-1018B-79 Knob 1 CB-1034D-39 CB-1036D-39 Knob Interval on Models CB-1026D-30 CB-1028D-30 CB-1029D-30 CB-1030D-30 1 0.1 to 10 Sec. 0.1 to 10 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. Adjustment Voltage Time 24VAC 0.1 to 10 Sec. 120VAC 0.1 to 5 Sec. 0.1 to 10 Sec. 1 to 10 Min. 24VDC 0.1 to 5 Sec. 1.8 to 180 Sec. Outline Dimensions 2.406 MAX. (61.1) 2.937 MAX. (74.6) .56 (14.2) .60 (15.2) 1.781 MAX. (45.2) Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) EXTERNAL CONTROL SWITCH* EXTERNAL CONTROL SWITCH* _ + _ + _ INPUT (DC POLARITY INDICATED)** CONTINUOUS SUPPLY INPUT (DC POLARITY INDICATED)** CONTINUOUS SUPPLY INPUT (DC POLARITY INDICATED)** Fig. 1 8 Pin Fig. 3 11 Pin Fig. 5 8 Pin + * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A "dry circuit" switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1229 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CR series Recycle Time Delay Relay * Individual ON and OFF time adjustment knobs * 10A output relay with DPDT contacts * Various models time from 0.1 to 180 sec. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Initial Dielectric Strength Recycle timing - First delay period begins when input voltage is applied. At the end of the first delay, or "off" period, the relay will operate and the second delay, or "on" period, begins. When the second delay period ends, the relay de-energizes. This recycling sequence will continue until input voltage is removed. When input voltage is removed, the relay will deenergize. Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. INPUT VOLTAGE ON OFF N.O. RELAY CONTACTS ON OFF 1 TIME TIME 2 Input Data @ 25C Voltage: 120VAC and 24VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Transient Protection: Yes. Reverse Voltage Protection: Yes. 1 TIME Input Voltages & Limits @ 25C Timing Specifications Timing Ranges: From 0.1 to 180 sec. Timing Adjustment: Knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): -0%, +20% of max. specified at high end of timing range; min. specified, or less, at low end. Delta Time (for AC units add 1 cycle 60 Hz.): 10%. Repeatability (for AC units add 1 cycle 60 Hz.): 2%. Release Time: 60ms, typ.; 100 ms, max. Voltage Type Nominal Voltage Minimum Voltage Maximum Voltage AC DC 120 24 105 20 130 32 Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. Environmental Data Temperature Range: Storage: -55C to +85C. Operating: -10C to +55C. Contact Data @ 25C Mechanical Data Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10 A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Termination: Octal plug. Enclosure: White plastic case with dial scales for reference only. Sockets: Fits either 27E122 or 27E891 (snap-on) 8-pin screw terminal sockets. Weight: 6 oz. (170g) approximately. Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Part Number Outline Dimensions 24VDC Time Part Number 1.8 to 180 Sec. CRD-48-30180 Wiring Diagram - Bottom View .875 (22.23) (pins numbered clockwise form keyway) .56 (14.22) 1.781 MAX. (45.2) .60 (15.2) 3.56 MAX. (90.42) Voltage DC Type CRB-48-70010 CRB-48-70030 CRB-48-70060 CRB-48-70180 AC Types Time 0.1 to 10 Sec. 120VAC 0.3 to 30 Sec. 0.6 to 60 Sec. 1.8 to 180 Sec. Voltage 1 1.25 (31.75) 8 + INPUT _ (DC POLARITY INDICATED) Fig.1 8 Pin ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". 2.406 MAX. (61.1) Dimensions are shown for 1230 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CL -CU series Compact Time Delay Relay * * * * * * Delay on operate timing mode Fixed, knob or resistor adjustable types 10A output relay with DPDT contacts Variety of mounting options Various models time from 0.1 to 120 sec. No timing cycle interrupt transfer (CL only) File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Contact Data @ 25C Delay on operate - Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. INPUT VOLTAGE ON OFF N.O. RELAY CONTACTS ON OFF TIME Initial Dielectric Strength Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. CL Timing Specifications Input Data @ 25C Timing Ranges: From 0.1 to 1.0 sec. through 1.2 to 120 sec. Timing Adjustment: Fixed, external resistor and knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types:-0, +20% of max. specified at high end of timing range; min. specified, or less, at low end. Fixed Types: 5%. Res. Adj. Types: 10% at high end of timing range; min. specified, or less, at low end. Repeatability (for AC units add 1 cycle 60 Hz.): 3%. Release Time: 100 ms, typ.; 150 ms, max. Recycle Time: 100 ms, typ.; 150 ms, max. Voltage: 24 & 120VAC and 12 & 24VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Transient Protection: Yes. Reverse Voltage Protection: Yes. Input Voltages & Limits @ 25C Voltage Type Nominal Voltage Minimum Voltage Maximum Voltage AC 24 120 12 24 20 105 11 20 28 130 13 32 DC CU Timing Specifications Timing Ranges: From 1.0 to 10 sec. through 1.0 to 120 sec. Timing Adjustment: Fixed, external resistor and knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types:-0, +20% of max. specified at high end of timing range; min. specified, or less, at low end. Fixed Types: 5%. Res. Adj. Types: 10% at high end of timing range; min. specified, or less, at low end. Repeatability (for AC units add 1 cycle 60 Hz.): 3%. Release Time: 150 ms, typ.; 225 ms, max. Recycle Time: 150 ms, typ.; 225 ms, max. Note: On CU types the switching contact may momentarily transfer if the timing interval is interrupted. CL types have no timing cycle interrupt transfer. Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. Environmental Data Temperature Range: Storage: -55C to +85C. Operating: -10C to +55C. Mechanical Data Termination: 0.187 in. (4.75mm) quick-connect. Enclosure: Yellow plastic case (see outline drawings for various options). Knob adjustable types have dial scale for reference only. Sockets: Solder, printed circuit and screw terminal sockets available. Weight: 3.5 oz. (99g) approximately. CL Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Voltage Time Adjustment Wiring Dia. Part Number Voltage Time 24VAC 0.1 to 10 Sec. Knob 1 CLB-51-30010 12VDC 0.1 to 10 Sec. 24VAC 0.1 to 10 Sec. Resistor 2 CLF-42-30010 12VDC 10 Sec. 1.2 to 120 Sec. Knob 1 CLB-51-70010 CLB-51-70030 CLB-51-70120 12VDC 120VAC 0.1 to 10 Sec. 0.3 to 30 Sec. 1.2 to 120 Sec. 24VDC 5 Sec. Fixed 1 CLA-41-70003 CLA-41-70030 24VDC 0.1 to 10 Sec. 0.3 to 30 Sec. 0.1 to 10 Sec. Resistor 2 120VAC 120VAC 3 Sec. 30 Sec. 0.1 to 10 Sec. 0.1 to 10 Sec. 1.2 to 120 Sec. Dimensions are shown for reference purposes only. CLF-41-70010 CLF-42-70010 CLF-41-70120 Dimensions are in inches over (millimeters) unless otherwise specified. Adjustment Wiring Dia. Part Number Knob 1 CLD-51-20010 CLC-41-20010 Fixed 1 Resistor 2 CLH-41-20120 Fixed 1 CLC-41-30005 Resistor 2 CLH-41-30010 CLH-41-30030 CLH-45-30010 41 style models (e.g. CLA-41-70010) have plain case. 42 style models (e.g. CLF-42-70010) have bracket mount case. 45 style models (e.g. CLH-45-30010) have bracket mount case with test button. 51 style models (e.g. CLB-51-30010) have plain case with knob. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1231 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CU Ordering Information - Authorized distributors are more likely to stock boldface items listed below. Voltage Time 24VAC 10 Sec. Adjustment Wiring Dia. Part Number Fixed 1 CUA-41-30010 Resistor 2 CUF-41-30010 CUF-42-30010 1 to 10 Sec. 1 to 10 Sec. 24VAC 1 to 10 Sec. 1 to 30 Sec. 1 to 60 Sec. 1 to 120 Sec. 120VAC Knob 1 Sec. 3 Sec. 3 Sec. 5 Sec. 10 Sec. 10 Sec. 30 Sec. 120 Sec. 120VAC CUB-51-70010 CUB-51-70030 CUB-51-70060 CUB-51-70120 1 Fixed Time 120VAC 1 to 10 Sec. 1 to 10 Sec. 1 to 30 Sec. 1 to 120 Sec. 1 to 120 Sec. Adjustment Wiring Dia. Part Number 2 CUF-41-70010 CUF-42-70010 CUF-41-70030 CUF-41-70120 CUF-42-70120 Resistor 1 to 10 Sec. 1 to 10 Sec. 1 to 120 Sec. 1 to 120 Sec. 24VDC CUA-41-70001 CUA-41-70003 CUA-42-70003 CUA-41-70005 CUA-41-70010 CUA-42-70010 CUA-42-70030 CUA-41-70120 1 Voltage Resistor 2 CUH-41-30010 CUH-42-30010 CUH-41-30120 CUH-42-30120 41 style models (e.g. CUA-41-70010) have plain case. 42 style models (e.g. CUA-42-70010) have bracket mount case. 51 style models (e.g. CUB-51-70010) have plain case with knob. Outline Dimensions 41 Style 51 Style 42 & 45 Style 1.406 MAX. (35.71) .07 (1.78) .312 TYP. (7.92) .375 (9.53) 1.531 MAX. (38.89) .645 TYP. (15.88) .625 MAX. (15.88) 1.906 MAX. (48.41) 1.906 MAX. (48.41) 2.500 (63.50) 2.156 MAX. (15.46) 2.90 MAX. (73.66) 6 7 8 9 A .75 .015 (19.05 .38) .06 (1.52) Terminal Dimensions 1.406 MAX. (35.71) .187" (4.74mm) Quick Connect/Solder .078 (1.98) B SEATED HEIGHT ABOVE CHASSIS MOUNTED IN SOCKET : (57.2mm) .125 (3.18) 5 .078 R TYP. (1.98) .187 .002 (4.75 .05) .250 (6.35) HEADER .281 REF. (7.14) THICKNESS 0.20 (.51) 4 3 2 .281 REF. (7.14) 1 .437 (11.10) 1.531 MAX. (38.89) .281 REF. (7.14) Wiring Diagrams - Bottom Views + INPUT (DC DC POLARITY INDICATED) ** 7 A 2 5 3 6 B 1 4 A 3 6 9 1 4 7 9 B + INPUT (DC POLARITY INDICATED) ** Fig. 1 Fig. 2 ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to "+" and low side to "-". External Resistor Selection Chart See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook. Dimensions are shown for 1232 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT MD0 series Subminiature, On-Delay Time Delay Relay * * * * * * On-delay timing mode Seven user-selectable timing ranges (0.1 sec. to 10 hr.) High accuracy and reliability Exceptional transient protection (ANSI C37.90) 5A DPDT or 4PDT output contacts Universal voltage File E60363 File LR51332 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C On-Delay. Voltage: Universal: 24-240VAC, 50/60 Hz. or 24-125VDC. Power Requirement: 2W, max. Transient Protection: Meets ANSI C37.90 Transient Specification. Environmental Data Temperature Range: Storage: -25C to +85C. Operating: -25C to +60C. Timing Specifications Timing Ranges: Instantaneous; 0.1 to 1 / 1 to 10 / 10 to 100 sec.; 1 to 10 / 10 to 100 min.; 1 to 10 hr. Timing Range Selection: Screwdriver select via recessed dial on side. Timing Adjustment: Screwdriver adjust via recessed dial with reference calibrations on top. Accuracy: Repeat Accuracy: 0.5% Overall Accuracy: 1% 0.02 sec. Reset Time: 25 ms. Contact Data @ 25C Mechanical Data Mounting/Termination: MD0 series time delay relays can be socket mounted horizontally or vertically and will operate within repeat accuracy of 0.5%. Sockets: Fits either 27E166 or 27E894 (snap-on) screw terminal sockets. Status Indication: Power On LED and Output Contacts LED. Weight: 4 oz. (96g) approximately. Arrangements: 2 Form C (DPDT) or 4 Form C (4PDT). Rating: 5A @ 30VDC or 240VAC, resistive. Expected Electrical Life: 100,000 operations, min., at rated resistive load. Outline Dimensions 3.00 (76.2) Ordering Information .85 (21.6) 2.75 (69.8) 1.05 (26.7) Part Number MD012AU MD014AU Contacts DPDT 4PDT Input Voltage Universal 24-240VAC, 50/60 Hz. or 24-125VDC Authorized distributors are likely to stock the following: MD014AU Wiring Diagrams (Bottom Views) Terminal Base Diagram NOTE: Only necessary terminals are present on DPDT models. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1233 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SSC series Specification Grade Discrete Plug-in Time Delay Relay * * * * * * On-Delay, Off-Delay and Interval timing modes 13 timing ranges from 0.1 sec. to 60 min. 10A DPDT output contacts Escellent repeatability of 1% or better. Exceptional immunity to transients and noise. Wide operating temperature range. File 3520 File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25C On-Delay, Off-Delay and Interval. Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12VDC 1,000V 240V* 24VAC/VDC 1,000V 240V* 48 VAC/VDC 1,000V 480V* 120 VAC/VDC 3,000V 2,500V* 240VAC 3,000V 2,500V* * Minimum source impedance of 100 ohm. Timing Specifications Timing Ranges: 6 to 180 cycles; 0.1 to 3 / 0.1 to 10 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10 hr. (All are +10%, -1% of maximum values). Timing Adjustment: Knob or fixed time (internal fixed resistor) - all models; customer supplied external potentiometer or resistor - On-Delay and Interval models only. Accuracy: Repeat Accuracy: 1% 0.004 sec. at any combination of operating temperature and voltage. Overall Accuracy: 5.25% throughout operating temperature and voltage ranges. Reset Time: 25 ms. (minimum deenergized interval for on-delay or off-delay models, or minimum required closure interval for interval models without affecting accuracy.) Relay Operate Time: Off-Delay mode only: 35 ms. Relay Release Time: On-Delay mode only: 20 ms. Contact Data @ 25C Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 500,000 operations, min., at rated resistive load. Initial Dielectric Strength Between Terminals and Case: 1,000VAC plus twice the nominal voltage for one minute. Outline Dimensions .70 (18) 1.97 (50) Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -30C to +65C. Mechanical Data Mounting/Termination: 8- or 11-pin octal type plug. 8-pin types fit either 27E122 or 27E891, while 11-pin types fit 27E123 or 27E892. Weight: 4 oz. (112g) approximately. Ordering Information SSC | Series SSC Discrete Industrial Timer Wiring Diagrams (Bottom Views) Insulated, shielded twoconductor cable similar to Belden 8719, 8720 or 8769 required for leads longer than 6 inches. Max. permissble length is 50 feet. Off-Delay On-Delay & Interval On-Delay & Interval Fixed or Knob Adjust Fixed or Knob Adjust External Potentiomer or Resistor Adjust Dimensions are shown for 2 | Output 2 = DPDT Relay Operating Mode 01 = On-Delay 02 = Off-Delay 03 = Interval 3.25 (83) 1.97 (50) 1234 reference purposes only. 01 | | | | | Dimensions are in inches over (millimeters) unless otherwise specified. A | | | | | | | | | | | | A | A | | | | | | | | | | | | Timing Range A =0 .1 to 3 sec. B = 0.5 to 15 sec. C = 1 to 30 sec. D = 2 to 60 sec. E = 4 to 120 sec. F = 6 to 180 sec. G = 10 to 300 sec. I = 2 to 60 min. K = 3 to 180 cycles L = 0.33 to 10 min. M = 0.5 to 15 min. N = 1 to 30 min. P = 0.1 to 10 min. Operating Voltage Timing Adjustment (+10%, -15%) A = Knob Adjust A = 120VAC, 50/60 Hz. B = External / 120VDC Potentiometer or B = 240VAC, 50/60 Hz. resistor (Operating E = 24VAC, 50/60 Hz. / modes 1 and 3 only). 24VDC F = Fixed Times - F = 48VAC, 50/60 Hz. / Specify time delay 48VDC in seconds per the Q = 12VDC (10%) following examples: F9.000 = 9 sec. F99.00 = 99 sec. F999.0 = 9999 sec. F1000 = 1000 sec. Authorized distributors are likely to stock the following: SSC12AAA SSC12ABA SSC12ACA SSC12ADA Specifications and availability subject to change. SSC12AGA SSC12ALA. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SCB/SCC series Specification Grade Discrete Plug-in Time Delay Relay * * * * * * On-Delay, Off-Delay and Interval timing modes 13 timing ranges from 0.1 sec. to 60 min. 10A DPDT output contacts Knob, fixed or external timing adjustment. Rated for pilot duty Premium components File 3520 File LR51332 (R) (R) File E60363 File E60363 (SCC only) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25C On-Delay, Off-Delay and Interval. Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms All except 12 & 24 3,000V 2,500 12 & 24 Consult Factory Timing Specifications Timing Ranges: 6 to 180 cycles; 0.1 to 3 / 0.1 to 10 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10 hr. (All are +5%, -0% of maximum values). Timing Adjustment: Knob or fixed time (internal fixed resistor) - all models; customer supplied external potentiometer or resistor - On-Delay and Interval models only. Accuracy: Repeat Accuracy: 0.5% 0.004 sec. Overall Accuracy: 2% max. Reset Time: 25 ms. Relay Operate Time: Off-Delay mode: 30 ms; Interval mode: 20 ms.. Relay Release Time: On-Delay mode only: 15 ms. Contact Data @ 25C Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC; 345VA. Same polarity. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 500,000 operations, min., at rated resistive load. Initial Dielectric Strength Between Terminals and Case: 1,000VAC plus twice the nominal voltage for one minute. Outline Dimensions .70 (18) 1.97 (50) 3.25 (83) 1.97 (50) Wiring Diagrams (Bottom Views) Insulated, shielded twoconductor cable similar to Belden 8719, 8720 or 8769 required for leads longer than 6 inches. Max. permissble length is 50 feet. Off-Delay On-Delay & Interval On-Delay & Interval Fixed or Knob Adjust Fixed or Knob Adjust External Potentiomer or Resistor Adjust Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Environmental Data Temperature Range: Storage: SCB and SCC: -40C to +85C. Operating: SCB: -30C to +65C; SCC: -30C to +50C. Mechanical Data Mounting/Termination: SCB: UL recognized. Optional 8- or 11-pin octal-type sockets may be ordered separately. SCC: 8- or 11-pin octal type sockets supplied with timer. (Must be used to qualify as "UL Listed" device.) Weight: SCB: 5.3 oz. (149g) approx.; SCC: 7.5 oz. (210g) approx. Ordering Information (All "X's" must be included to complete part number) SCB | RX 2XX A 01 | | | | | Operating Mode | | Series SCB Series SCC | 01 = On-Delay | | Discrete 02 = Off-Delay | | | Industrial 03 = Interval | | | Timer | | Output 2XX = DPDT | | Relay | | | Mounting Series SCB RX = 8- or 11-pin | socket (order | separately) | Mounting Series SCC LA = 8-pin socket p/n | BCSA08SC for operating mode 01 or 03 with knob adjust or fixed time. LC = 11-pin socket p/n BCSA11SC for operating mode 02; or 01 or 03 with external potentiometer or resistor. A | Timing Range A =0 .1 to 3 sec. B = 0.5 to 15 sec. C = 1 to 30 sec. D = 2 to 60 sec. E = 4 to 120 sec. F = 6 to 180 sec. G = 10 to 300 sec. I = 2 to 60 min. K = 3 to 180 cycles L = 0.33 to 10 min. M = 0.5 to 15 min. N = 1 to 30 min. P = 0.1 to 10 min. Operating Voltage (+10%, -15%) A = 120VAC, 50/60 Hz. / 120VDC B = 240VAC, 50/60 Hz. E = 24VAC, 50/60 Hz. / 24VDC F = 48VAC, 50/60 Hz. / 48VDC Q = 12VDC XA | | | | | | | | | | | | | Timing Adjustment XA = Knob Adjust XB = External Potentiometer or resistor (Operating modes 1 and 3 only). XF =Fixed Times - Specify time delay in seconds per the following examples: XF9.000 = 9 sec. XF99.00 = 99 sec. XF999.0 = 9999 sec. XF1000 = 1000 sec. Authorized distributors are likely to stock the following: None at present. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1235 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT STA series Specification Grade Discrete Plug-in Time Delay Relay With QC Terminals * On-Delay, Off-Delay, Interval and Accumulating On-Delay timing modes * 13 timing ranges from 0.1 sec. to 48 hr. * 10A DPDT output contacts * Knob, fixed or external timing adjustment. * QC plug-in terminals save space, two LEDs show status File 3520 File LR51332 (R) File E60363 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25C On-Delay, Off-Delay, Interval and Accumulating On-Delay. Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Timing Specifications Timing Ranges: 6 to 180 cycles; 0.1 to 3 / 0.5 to 15 / 1 to 30 / 2 to 60 / 4 to 120 / 6 to 180 / 10 to 300 sec.; 0.33 to 10 / 0.5 to 15 / 1 to 30 min.; 1 to 6 / 2 to 48 hr. (All are +5%, -0% of maximum values). Timing Adjustment: Knob or fixed time (internal fixed resistor) - all models; customer supplied external potentiometer or resistor - On-Delay and Interval models only. Accuracy: Repeat Accuracy: .5% 0.004 sec.. Overall Accuracy: 2% throughout operating temperature and voltage ranges. Reset Time: 30 ms. min. (between deenergization and reenergization without affecting accuracy.) Relay Operate Time: Off-Delay mode: 35 ms.; Interval mode: 20 ms. Relay Release Time: On-Delay and Accumulating On-Delay modes: 20 ms. Operating Voltage All except 12 & 24 12 & 24 <0.1 ms <1 ms 3,000V 2,500 Consult Factory Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -30C to +65C. Mechanical Data Mounting/Termination: Quick connect terminals fit either 27E121 or 27E893 (snap-on) socket (order separately). Status Indication: Power On LED and Output Contacts LED (optional). Weight: 4.2 oz. (119g) approximately. Contact Data @ 25C Ordering Information Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC; 345VA. Same polarity. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 500,000 operations, min., at rated resistive load. S STA RX 01 2X A | | | | | | Status | Series STA | Operating Mode | Discrete | 01 = On-Delay | Indication | LEDs Industrial | 02 = Off-Delay | SX == No | LEDs Timer 03 = Interval | 09 = Accumulating | | With Tab-type | On-Delay | | Terms. | | Output 2X = DPDT | | Relay | Mounting Series RX = 11-pin tab-type | header (order | socket | separately) | Initial Dielectric Strength Between Terminals and Case: 1,000VAC plus twice the nominal voltage for one minute. Outline Dimensions 1.500 MAX. (38) 1.390 MAX. (35) .660 MAX. (17) .281 REF. (7) 3.045 (77) (All "X's" must be included to complete part number) Insulated, shielded two-conductor cable similar to Belden 8719, 8720 or 8769 required for leads longer than 6 inches. Maximum permissble length is 50 feet. On-Delay & Interval On-Delay & Interval Fixed or Knob Adjust Fixed or Knob Adjust External Potentiomer or Resistor Adjust Dimensions are shown for 1236 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. XA | Timing Range | A =0 .1 to 3 sec. | B = 0.5 to 15 sec. | C = 1 to 30 sec. | D = 2 to 60 sec. E = 4 to 120 sec. | F = 6 to 180 sec. | G = 10 to 300 sec. | I = 2 to 60 min. | J = 1 to 6 hr. K = 3 to 180 cycles | L = 0.33 to 10 min. | M = 0.5 to 15 min. | N = 1 to 30 min. R = 2 to 48 hr. | Operating Voltage Timing Adjustment (+10%, -15%) XA = Knob Adjust A = 120VAC, 50/60 XB = External Hz. / 120VDC Potentiometer or E = 24VAC, 50/60 resistor (Operating Hz. / 24VDC modes 1 and 3 F = 48VAC, 50/60 only). Hz. / 48VDC XF =Fixed Times - Q = 12VDC Specify time delay in seconds per the following examples: XF9.000 = 9 sec. XF99.00 = 99 sec. XF999.0 = 9999 sec. XF1000 = 1000 sec. Wiring Diagrams (Bottom Views) Off-Delay & Accumulating On-Delay A | Authorized distributors are likely to stock the following: None at present. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SRC series Specification Grade Repeat Cycle Plug-in Time Delay Relay * * * * * * * Repeat Cycle timing mode Dual knobs for user adjustment of on and off times. 13 timing ranges from 0.1 sec. to 60 min. 10A DPDT output contacts Exceptional immunity to line transients and noise Premium components enhance reliability Superior reset time of 24 msec. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25C Repeat Cycle: Application of line voltage starts the pre-set OFF-time period Upon expiration of the period, the output relay is energized, its contacts transfer, and the pre-set ON-time period begins. At the end of this period the output relay is deenergized, and a new cycle begins. The OFF and ON cycles continue until power is removed. To reset the timer, input voltage must be removed for at least 25 ms. Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12VDC 1,000V 240V* 24VAC/VDC 1,000V 240V* 48 VAC/VDC 1,000V 480V* 120 VAC/VDC 3,000V 2,500V* 240VAC 3,000V 2,500V* * Minimum source impedance of 100 ohm. Timing Specifications Timing Ranges: OFF time and ON time ranges need not be the same. 6 to 180 cycles; 0.1 to 3 / 1 to 10 / 0.5 to 15 / 1 to 30 / 2 to 60 / 4 to 120 / 6 to 180 / 10 to 300 sec.; 0.33 to 10 / 0.5 to 15 / 1 to 30 / 2 to 60 min. (All are +10%, -1% of maximum values). Timing Adjustment: Two internal potentiometers with external knobs. Accuracy: Repeat Accuracy: 1% 0.004 sec.. Overall Accuracy: 2.25% max. Reset Time: 25 ms. max. (between deenergization and reenergization without affecting accuracy.) Relay Operate Time: 20 ms. Relay Release Time: 15 ms. Contact Data @ 25C Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 500,000 operations, min., at rated resistive load. Initial Dielectric Strength Between Terminals & Case and Mutually Isolated Contacts: 1,480VAC. Outline Dimensions 1.97 (50) .40 (10) 3.7 MAX. (94) 1.97 (50) Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -30C to +65C. Mechanical Data Mounting/Termination: Quick connect terminals fit either 27E121 or 27E893 (snap-on) socket (order separately). Weight: 5.3 oz. (149g) approximately. Ordering Information SRC | 7 2 A | | | Series SRC | Output | Repeat | 2 = DPDT | Cycle Relay | | Timer. | | | Operating Mode 7= Repeat Cycle | | | | | | | C | C | | | | | | | | | | A | Timing Range Timing Off-Time Adjustment A =0 .1 to 3 sec. A = Dual Knob B = 0.5 to 15 sec. Adjust C = 1 to 30 sec. D = 2 to 60 sec. E = 4 to 120 sec. F = 6 to 180 sec. G = 10 to 300 sec. I = 2 to 60 min. K = 3 to 180 cycles L = 0.33 to 10 min. Timing Range M = 0.5 to 15 min. On-Time N = 1 to 30 min. P = 0.1 to 10 sec. A =0 .1 to 3 sec. B = 0.5 to 15 sec. Operating Voltage C = 1 to 30 sec. (+10%, -15%) D = 2 to 60 sec. A = 120VAC, 50/60 E = 4 to 120 sec. Hz. / 120VDC F = 6 to 180 sec. B = 240VAC, 50/60 G = 10 to 300 sec. Hz. I = 2 to 60 min. E = 24VAC, 50/60 K = 3 to 180 cycles Hz. / 24VDC L = 0.33 to 10 min. F = 48VAC, 50/60 M = 0.5 to 15 min. Hz. / 48VDC N = 1 to 30 min. Q = 12VDC P = 0.1 to 10 sec. Wiring Diagram (Bottom View) Authorized distributors are likely to stock the following: None at present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1237 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SST series Industrial Grade Discrete Plug-in Time Delay Relay * * * * * * On-Delay, Off-Delay, Interval, One Shot & Repeat modes Time delays to 120 min. Fast setting with time calibrated knobs. Superior transient protection. Rugged construction with 8- or 11-pin plug. Flame retardant housing. File E15631 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Mechanical Data On-Delay, Off-Delay, Interval, One Shot (Latching Interval) or Repeat Cycle. Mounting/Termination: On-Delay, Interval and Repeat types have 8- pin octal plug that fits either 27E122 or 27E891 socket. Off-Delay and One Shot types have 11-pin octal-type plug that fits 27E123 or 27E892. Sockets must be orderd separately. Weight: 4 oz. (112g) approximately. Timing Specifications Timing Ranges: Nine ranges spanning 0.1 sec. to 120 min. Timing Adjustment: Knob adjust. Accuracy: Repeat Accuracy: 1%. Overall Accuracy: 5%. Reset Time: 50 ms., max., (25 ms typ.) for on-delay and interval; 300 ms, max., for off-delay and one shot; 500 ms, max., for repeat type. Relay Operate Time: 50 ms. Relay Release Time: 30 ms. Contact Data @ 25C Arrangements: 2 Form C (DPDT). Rating: 10A @ 120/240VAC, resistive; 1/3 HP @ 120/240VAC, 50/60 Hz. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 500,000 operations, min., at rated resistive load. Ordering Information SST1 - On Delay Types Time Range Part No. Input Time Range Part No. 120 VAC 0.1 - 10 sec. 0.6 - 60 sec. 1.8 - 180 sec. 3 - 300 sec. 18 sec. - 30 min. 36 sec. - 60 min. SST12AAA SST12ACA SST12ADA SST12AEA SST12AGA SST12AHA 120 VDC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. 18 sec. - 30 min. 36 sec. - 60 min. SST22AAA SST22ADA SST22AEA SST22AGA SST22AHA 24 VAC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. SST12EAA SST12EDA SST12EEA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST22EAA SST22EDA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST22OAA SST22ODA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. SST12OAA SST12ODA SST12OEA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST22QAA SST22QDA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. SST12QAA SST12QDA SST12QEA Initial Dielectric Strength Between Contacts, Line Inputs and Control Circuits: 1,500V RMS, minimum, at 60 Hz. Input Data @ 25C Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12 & 24 VAC/VDC 860V 208V* 120 VAC 2,580V 2,150V* * Minimum source impedance of 100 ohm. Environmental Data Temperature Range: Storage: -23C to +71C. Operating: -23C to +54C. Outline Dimensions 2.0 MAX. (50.8) SQUARE .812 MAX. (20.6) 3.20 MAX. (81.3) 4.60 MAX. (116.8) SST2 - Off Delay Types Input SST4 - One Shot* Types SST3 - Interval Types Input Time Range Part No. Input Time Range Part No. 120 VAC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. 36 sec. - 60 min. SST32AAA SST32ADA SST32AEA SST32AHA 120 VDC 24 VAC 0.1 - 10 sec. 1.8 - 180 sec. SST32EAA SST32EDA 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. 18 sec. - 30 min. 36 sec. - 60 min. SST42AAA SST42ADA SST42AEA SST42AGA SST42AHA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST32OAA SST32ODA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST42EAA SST42EDA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST32QAA SST32QDA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST42OAA SST42ODA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST42QAA SST42QDA SST7 - Repeat Cycle Types Input Time Range Part No. 120 VDC 0.1 - 10 sec. 1.8 - 180 sec. 3 - 300 sec. 18 sec. - 30 min. 36 sec. - 60 min. SST72AAA SST72ADA SST72AEA SST72AGA SST72AHA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST72EAA SST72EDA 24 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST72OAA SST72ODA 12 VDC 0.1 - 10 sec. 1.8 - 180 sec. SST72QAA SST72QDA Wiring Diagrams (Bottom Views) * Also known as Latching Interval Authorized distributors are likely to stock the following: None at present. Dimensions are shown for 1238 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SCE series Specification Grade Discrete Plug-in True Off-Delay Time Delay Relay * * * * * (R) True Off-Delay timing modes Six time delays from 0.1 sec. to 10 min. 10A SPDT or 5A DPDT output contacts. Excellent repeat accuracy - typically better than 1%. 8--pin octal plug. File E15631 File LR51332 CAUTION: If unit has not been energized for several months, apply operating voltage for 20 minutes prior to initial time delay. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Initial Dielectric Strength True Off-Delay - Upon application of operating voltage (min. 100ms), output relay contacts transfer. When operating voltage is removed, the time delay period is initiated. At the end of the delay period, output relay contacts release. If operating voltage is reapplied prior to expiration of the delay period, the delay will be cancelled and output relay contacts will remain transferred. Between Terminals and Case and relay contacts and active circuitry: 1,480VAC for one minute. Timing Specifications Input Data @ 25C Voltage: See Ordering Information section for details. Power Requirement: 750mw. Transient Protection: 1,000V plus twice rated voltage for 0.1 ms. Timing Ranges: 0.1 to 3 / 0.5 to 15 / 1 to 30 / 4 to 120 / 10 to 300 sec.; 0.33 to 10 min. Timing Adjustment: Knob adjustment - Internal potentiometer with external knob adjustment. Maximum time calibrated with +10%, -0% of values shown below at rated voltage, at 68F. Fixed time - internal fixed resistor. Accuracy: Repeat Accuracy: 1. Overall Accuracy: 5%. Reset Time: 30 ms. min. Relay Operate Time: 30 ms. Environmental Data Contact Data @ 25C Ordering Information Arrangements: 1 Form C (SPDT) and 2 Form C (DPDT). Rating: 1 Form C: 10A @ 120/240VAC, resistive; 1/3 HP @ 120VAC; 345VA @ 120VAC; 1/4 HP @ 240VAC; 275VA @ 240VAC. Same polarity. 2 Form C: 5A @ 28VDC or 120/240VAC, resistive; 1/6 HP @ 120/ 240VAC; 200VA @ 120/240VAC. Same polarity. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 200,000 operations, min., at rated resistive load. Outline Dimensions .60 (15) 1.97 (50) 3.25 (83) Temperature Range: Storage: -40C to +85C. Operating: -30C to +65C. Mechanical Data Mounting/Termination: 8-pin octal plug fits either 27E122 or 27E891 (snap-on) socket (order separately). Weight: 4 oz. (112g) approximately. SCE | R X 2 2 | | | | | | Series SCE Output Rating Output True | W = 10A (SPDT) | 1 = SPDT (W) Off-delay | X = 5A (DPDT) | 2 = DPDT (W) Timer | | Agency Recognition R = UL recognized Operating Mode 2 = True Off-Delay C | Timing Range A =0 .1 to 3 sec. B = 0.5 to 15 sec. C = 1 to 30 sec. E = 4 to 120 sec. G = 10 to 300 sec. L = 0.33 to 10 min. A | | | | | | | | | | | | | Operating Voltage (+10%, -15%) A = 120VAC, 50/60 Hz. / 125VDC E = 24VAC, 50/60 Hz. / 24VDC Timing Adjustment F = 48VAC, 50/60 A = Knob Adjust Hz. / 48VDC F = Fixed Times - Specify time delay in seconds per the following examples: XF9.000 = 9 sec. XF99.00 = 99 sec. XF999.0 = 9999 sec. XF1000 = 1000 sec. 1.97 (50) Wiring Diagrams (Bottom Views) Fixed Time Or Knob Adjust A | | | | | | | | | Fixed Time Or Knob Adjust Authorized distributors are likely to stock the following: None at present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1239 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM-1 series Specification Grade, On-Delay Timing Module * * * * * * On-delay timing mode Timing from 1 to 1000 sec. 1A solid state SPST-NO output 0.25" (6.35) quick connect terminals Universal voltage: 24 to 240VAC/VDC Rated to 10 million operations File E60363 File LR51332 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C On-Delay - VTM-1 in-line timing module is wired in series with the load circuit. Time delay is initiated when power is applied to the series network. Connecting a resistor across the center terminals provides tamper-proof setting of time delay from 1-1000 sec. Operating Voltage: Universal: 24-240VAC/VDC (19-288VAC/VDC). Current: 2mA (max.) required to operate timer regardless of output state. Power Requirement: 3W, max. Transient Protection: MOV across input 2,000V for 11s on line side of load. Timing Specifications Timing Ranges: 1 to 1,000 sec. Timing Adjustment: Time delay is set by connecting an appropriately rated resistor or potentiometer between the center two terminals. As supplied, the unit provides a nominal 1 second delay. Add 10k ohm of resistance for every additional second of delay required. For example: 5 seconds = 40k ohms; 10 seconds = 90k ohms. Accuracy: Repeat Accuracy: 2% Reset Time: 100 ms, max., in the timing or time-out condition. Output Switch Data Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -30C to +65C. Mechanical Data Screw mount in horizontal or vertical position through built-in mounting ears. Termination: 0.250 in (6.35) quick connect terminals for input line, load output and timing resistor connection. Weight: 3 oz. (84g) approximately. Mounting: Arrangement: 1 Form A (SPST-NO). Rating: 5A, inductive, at nominal operating voltage. Inrush: Not to exceed 10A for one cycle. Max. Leakage Current: 4mA rms. Expected Electrical Life: 10,000,000 operations at rated load. Initial Dielectric Strength Between Active Terminals and Outside of Case: 1,480VAC for one min. Outline Dimensions Ordering Information Part Number VTM-1 Mode On-Delay Input Voltage 24-240VAC or VDC Authorized distributors are likely to stock the following: VTM-1 Wiring Diagram Notes: 1. Do not operate timer without connecting load in series with line voltage. 2. For a time delay of 1 second, connect a jumper across the center two terminals. Dimensions are shown for 1240 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM1 series On-Delay Timing Module * * * * * On-delay timing mode Reliable solid state timing circuitry. Excellent transient protection. Compact design. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C On-Delay. Voltage: 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Power Requirement: 3W, max. Timing Specifications Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12, 24 VAC/VDC 860V* 208V* 120 VAC/VDC 2,580V 2,150V* Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 0.5 to 10 / 3 to 60 min. Timing Adjustment: External resistor or potentiometer. An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: Treq - Tmin x 1,000,000 ohms max - Tmin Accuracy: Repeat Accuracy: 1% Overall Accuracy: 2% at R = 1 megohm. Reset Time: 100 ms, max., before time-out; 10 ms, max., after time-out. Rt = (T * Min. source impedance of 100 ohm. ) Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -40C to +65C. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Expected Electrical Life: 10,000,000 operations at rated load. Mechanical Data Initial Dielectric Strength Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 3 oz. (84g) approximately. Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information 2.00 (50.8) VTM1 | 1.25 (31.8) .885 (22.5) Series VTM1 On-Delay Timing Module 2.00 (50.8) .170 DIA (4.32) ACCEPTS #8 SCREW A | Input Voltage A = 120VAC/VDC E = 24VAC/VDC Q = 12VAC/VDC CD | Time Range CD = 0.5 - 10 sec. DD = 3 - 60 sec. FD = 0.5 - 10 sec. GD = 3 - 60 sec. .250 (6.35) X .032 (.813) QUICK CONNECTS Wiring Diagram LOAD INPUT VOLTAGE An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: Rt = Dimensions are shown for reference purposes only. ( Treq - Tmin Tmax - Tmin ) Authorized distributors are likely to stock the following: VTM1ECD VTM1EDD x 1,000,000 ohms Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1241 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTMA1 series On-Delay Timing Module With Internal Potentiometer * * * * * * On-delay timing mode Discrete voltage or universal type. Internal potentiometer for timing adjustment. Reliable solid state timing circuitry. Excellent transient protection. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C On-Delay. Voltage: 10% 120VAC/VDC (unfiltered DC must be full-wave rectified) or 24 to 240 VAC/VDC. Power Requirement: 250mW during timing; 3W, max. after time out. Timing Specifications Timing Ranges: VMTA1ULA only: 24 to 480 sec. All others: 0.5 to 10 / 3 to 60 /15 to 300 sec.; 3 to 60 min. Timing Adjustment: Internal potentiometer. Accuracy: Repeat Accuracy: 5% Overall Accuracy: Max. Time: -0%, +10%. Min. Time: -30%, +10%. Reset Time: 250 ms, max., before time-out; 10 ms, max., after time-out. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 24 VAC/VDC 860V* 208V* 120/240 VAC/VDC 2,580V 2,150V* * Min. source impedance of 100 ohms. Current Drain: 2mA, Max. Output Switch Data Environmental Data Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Expected Electrical Life: 10,000,000 operations at rated load. Temperature Range: Storage: -40C to +85C. Operating: -40C to +65C. Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions amd Wiring Diagram 2.00 .388 (50.8) (9.85) .427 (10.8) Ordering Information 1.25 (31.8) .885 (22.5) Part Number VTMA1ACA VTMA1ADA VTMA1ACA Time Range 0.5 to 10 sec. 3 to 60 sec. 24 to 480 sec. Input Voltage 120VAC or VDC 24-240VAC or VDC TIME DELAY ADJUSTMENT 2.00 (50.8) INPUT VOLTAGE L1 .170 DIA (4.32) ACCEPTS #8 SCREW LOAD .250 (6.35) X .032 (.813) QUICK CONNECTS L2 Authorized distributors are likely to stock the following: None at present. Dimensions are shown for 1242 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTMR1 series On-Delay Timing Module With Internal Potentiometer, Relay Output * * * * * * On-delay timing mode 8A SPDT relay output. Internal potentiometer for timing adjustment. Reliable solid state timing circuitry. Excellent transient protection. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C On-Delay. Voltage: 10% 120VAC/VDC. Power Requirement: 3.5VA, max. Timing Specifications Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 120 VAC/VDC 2,580V 2,150V* Timing Ranges: 15 to 300 sec. Timing Adjustment: Internal potentiometer. Accuracy: Repeat Accuracy: 5% max. (0.25% typ.) Overall Accuracy: Max. Time: -0%, +10%. Min. Time: -30%, +10%. Reset Time: 250 ms, max. * Min. source impedance of 100 ohms. Current Drain: 30mA, Max. Output Contact Data Environmental Data Arrangement: 1 Form C (SPDT). Rating: 8A, resistive, at nominal operating voltage. Expected Mechanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations. Temperature Range: Storage: -40C to +70C. Operating: -40C to +70C. Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions and Wiring Diagram .278 (7.06) .763 (19.4) 2.00 (50.8) Ordering Information OUTPUT RELAY Part Number VTMR1AEA Time Range 15 to 300 sec. Input Voltage 120VAC OUTPUT RELAY .286 TIME (7.26) DELAY ADJUST 2.00 (50.8) .170 DIA (4.32) ACCEPTS #8 SCREW INPUT VOLTAGE .250 (6.35) X .032 (.813) QUICK CONNECTS .885 (22.5) 1.25 (31.8) Authorized distributors are likely to stock the following: None at present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1243 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM2 series Off-Delay Timing Module * * * * * Off-delay timing mode Reliable solid state timing circuitry. Excellent transient protection. Compact design. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C Off-Delay. Voltage:(10%): 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Power Requirement: 4W, with rated load. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12, 24 VAC/VDC 860V* 208V* 120 VAC/VDC 2,580V 2,150V* Timing Specifications Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 3 to 60 min. Timing Adjustment: External resistor or potentiometer. An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: Treq - Tmin x 1,000,000 ohms max - Tmin Accuracy: Repeat Accuracy: 1% Overall Accuracy: 2% at R = 1 megohm. Reset Time: 50 ms, max. Rt = (T ) * Min. source impedance of 100 ohms. Current Drain: Less than 5mA. Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -40C to +65C. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Expected Electrical Life: 10,000,000 operations at rated load. Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information VTM2 | 1.25 (31.8) 2.00 (50.8) .885 (22.5) Series VTM2 Off-Delay Timing Module 2.00 (50.8) .170 DIA (4.32) ACCEPTS #8 SCREW A | Input Voltage A = 120VAC/VDC E = 24VAC/VDC Q = 12VAC/VDC CD | Time Range CD = 0.5 - 10 sec. DD = 3 - 60 sec. GD = 3 - 60 min. .250 (6.35) X .032 (.813) QUICK CONNECTS Wiring Diagram POLARITY SHOWN FOR DC MODELS LOAD 1 7 START SWITCH 6 5 Rt 2 INPUT VOLTAGE 3 Dimensions are shown for 1244 reference purposes only. 4 An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: Rt = ( Treq - Tmin Tmax - Tmin ) Authorized distributors are likely to stock the following: None at present. x 1,000,000 ohms Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM3 series Interval Timing Module * * * * * Interval timing mode Reliable solid state timing circuitry. Excellent transient protection. Compact design. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C Interval. Voltage:(10%): 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Power Requirement: 4W, with rated load. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12, 24 VAC/VDC 860V* 208V* 120 VAC/VDC 2,580V 2,150V* Timing Specifications Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 3 to 60 min. Timing Adjustment: External resistor or potentiometer. An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: Treq - Tmin x 1,000,000 ohms max - Tmin Accuracy: Repeat Accuracy: 1% Overall Accuracy: 2% at R = 1 megohm. Reset Time: 50 ms, max. Rt = (T ) * Min. source impedance of 100 ohms. Current Drain: Less than 5mA. Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -40C to +65C. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Expected Electrical Life: 100,000,000 operations at rated load. Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information VTM3 | 1.25 (31.8) 2.00 (50.8) .885 (22.5) Series VTM3 Interval Timing Module 2.00 (50.8) .170 DIA (4.32) ACCEPTS #8 SCREW A | Input Voltage A = 120VAC/VDC E = 24VAC/VDC Q = 12VAC/VDC CD | Time Range CD = 0.5 - 10 sec. DD = 3 - 60 sec. GD = 3 - 60 min. .250 (6.35) X .032 (.813) QUICK CONNECTS Wiring Diagram POLARITY SHOWN FOR DC MODELS LOAD 1 5 2 4 Rt INPUT VOLTAGE An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: 3 Rt = Dimensions are shown for reference purposes only. ( Treq - Tmin Tmax - Tmin ) Authorized distributors are likely to stock the following: None at present. x 1,000,000 ohms Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1245 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM4 series One Shot (Latching Interval) Timing Module * * * * * One shot (latching interval) timing mode Reliable solid state timing circuitry. Excellent transient protection. Compact design. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C One Shot (Latching Interval). Voltage:(10%): 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Power Requirement: 4W, with rated load. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12, 24 VAC/VDC 860V* 208V* 120 VAC/VDC 2,580V 2,150V* Timing Specifications Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 0.5 to 10 / 3 to 60 min. Timing Adjustment: External resistor or potentiometer. An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: Treq - Tmin x 1,000,000 ohms max - Tmin Accuracy: Repeat Accuracy: 1% Overall Accuracy: 2% at R = 1 megohm. Reset Time: 50 ms, max. (T Rt = ) * Min. source impedance of 100 ohms. Current Drain: Less than 5mA. Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -40C to +65C. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Expected Electrical Life: 100,000,000 operations at rated load. Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information 1.25 (31.8) 2.00 (50.8) .885 (22.5) 2.00 (50.8) .170 DIA (4.32) ACCEPTS #8 SCREW VTM4 | Series VTM4 One Shot (Latching Interval) Timing Module A | Input Voltage A = 120VAC/VDC E = 24VAC/VDC Q = 12VAC/VDC CD | Time Range CD = 0.5 - 10 sec. DD = 3 - 60 sec. FD = 0.5 - 10 min. GD = 3 - 60 min. .250 (6.35) X .032 (.813) QUICK CONNECTS Wiring Diagram POLARITY SHOWN FOR DC MODELS LOAD 1 7 2 INPUT VOLTAGE 3 Dimensions are shown for 1246 reference purposes only. START SWITCH 6 5 4 An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following R t formula: Rt = ( Treq - Tmin Tmax - Tmin ) Authorized distributors are likely to stock the following: None at present. x 1,000,000 ohms Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM7 series Repeat Cycle Timing Module * * * * * * Repeat cycle timing mode Independently adjustable On and Off times. Reliable solid state timing circuitry. Excellent transient protection. Compact design. Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25C Repeat Cycle. Voltage:(10%): 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Power Requirement: 4W, with rated load. Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. Operating Voltage <0.1 ms <1 ms 12, 24 VAC/VDC 860V* 208V* 120 VAC/VDC 2,580V 2,150V* Timing Specifications Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 3 to 60 min. Timing Adjustment: External resistor or potentiometer. An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: Treq - Tmin x 1,000,000 ohms max - Tmin Accuracy: Repeat Accuracy: 1% Overall Accuracy: 2% at R = 1 megohm. Reset Time: 500 ms. Rt = (T ) * Min. source impedance of 100 ohms. Current Drain: Less than 5mA. Environmental Data Temperature Range: Storage: -40C to +85C. Operating: -40C to +65C. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Expected Electrical Life: 100,000,000 operations at rated load. Initial Dielectric Strength Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information 1.25 (31.8) 2.00 (50.8) VTM7 | .885 (22.5) Series VTM7 Repat Cycle Timing Module 2.00 (50.8) .170 DIA (4.32) ACCEPTS #8 SCREW A | Input Voltage A = 120VAC/VDC E = 24VAC/VDC Q = 12VAC/VDC CD | Time Range CD = 0.5 - 10 sec. DD = 3 - 60 sec. GD = 3 - 60 min. .250 (6.35) X .032 (.813) QUICK CONNECTS Wiring Diagram POLARITY SHOWN FOR DC MODELS LOAD 1 7 Rt OFF 6 5 Rt 2 INPUT VOLTAGE 4 ON An external resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual resistance needed to obtain the required time delay, use the following formula: Authorized distributors are likely to stock the following: None at present. 3 Rt = Dimensions are shown for reference purposes only. ( Treq - Tmin Tmax - Tmin ) x 1,000,000 ohms Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1247 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT 7000 series Industrial Electropneumatic Timing Relay File E15631 File LR29186 Series 7000 Timing Relays are also manufactured to MIL-SPEC requirements, conforming to requirements of MIL-C-2212F (SHIPS) with the exception of MILS-901. Consult factory for ordering information. Note:7032 types and certain models with accessories are not agency approved. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Design Features On-delay model 7012 (delay on pickup) * Available in on-delay, true off-delay, and on/off-delay. * Timing from 0.1 seconds to 60 minutes, fully calibrated in linear increments. * Oversize time-calibrated adjustment knobs, serrated with high-resolution markings visible from all angles makes the timer easy to set timers. * Inherent transient immunity. * Standard voltages from 6-550VAC and 12-550VDC (special voltages available.) * Available in 2-pole or 4-pole models. * Numerous enclosure options: explosion proof, dust tight, watertight, hermetically-sealed, NEMA 1. * Auxiliary timed and instantaneous switches can be added for greater switching flexibility. * Many mounting options: Surface mount, Panel mount, Octal plug-in mounting. * Options: quick-connect terminals, dial stops, and transient protection module. * Easy-to-reach screw terminals, all on the face of the unit, clearly identified. * Modular assembly - timing head, coil assembly and switchblock are all individual modules, with switches field-replaceable. Applying continuous voltage to the coil (L1-L2) starts a time delay lasting for the preset time. During this period the normally closed contacts (3-5 and 4-6) remain closed. At the end of the delay period the normally closed contacts break and the normally open contacts (1-5 and 2-6) make. The contacts remain in this transferred position until the coil is deenergized, at which time the switch instantaneously returns to its original position. De-energizing the coil, either during or after the delay period, will recycle the unit within 50 msec. It will then provide a full delay period upon re-energization, regardless of how often the coil voltage is interrupted before the unit has been permitted to "time-out" to its full delay setting. Design & Construction There are three main components of Series 7000 Timing Relays: Calibrated Timing Head uses no needle valve, recirculates air under controlled pressure through a variable orifice to provide linearly adjustable timing. Patented design provides instant recycling, easy adjustment and long service life under severe operating conditions. Precision-Wound Potted Coil module supplies the initial motive force with minimum current drain. Total sealing without external leads eliminates moisture problems, gives maximum insulation value. Snap-Action Switch Assembly - custom-designed over-center mechanism provides greater contact pressure up to transfer time for positive, no flutter action. Standard switches are DPDT arrangement, with flexible beryllium copper blades and silver-cadmium oxide contacts. Special "timing-duty" design assures positive wiping action, sustained contact pressure and greater heat dissipation during long delay periods. Each of these subassemblies forms a self-contained module which is then assembled at the factory with the other two to afford a wide choice of operating types, coil voltages, and timing ranges. The squared design with front terminals and rear mounting permits the grouping of Series 7000 units side-by-side in minimum panel space. Auxiliary switches may be added in the base of the unit, without affecting the overall width or depth. Off-delay model 7022 (delay on dropout) Applying voltage to the coil (for at least 50 msec) will instantaneously transfer the switch, breaking the normally closed contacts (1-5 and 2-6), and making the normally open contacts (3-5 and 4-6). Contacts remain in this transferred position as long as the coil is energized. The time delay begins immediately upon de-energization. At the end of the delay period the switch returns to its normal position. Re-energizing the coil during the delay period will immediately return the timing mechanism to a point where it will provide a full delay period upon subsequent deenergization. The switch remains in the transferred position. Operation Two basic operating types are available. "On-Delay" models provide a delay period on energization, at the end of which the switch transfers the load from one set of contacts to another. Deenergizing the unit during the delay period immediately recycles the unit, readying it for another full delay period on re-energization. In "Off-Delay" models the switch transfers the load immediately upon energization, and the delay period does not begin until the unit is deenergized. At the end of the delay period the switch returns to its original position. Re-energizing the unit during the delay period immediately resets the timing, readying it for another full delay period on de-energization. No power is required during the timing period. In addition to these basic operating types, "Double-Head" models offer sequential delays on pull-in and drop-out in one unit. With the addition of auxiliary switches the basic models provide two-step timing, pulse actuation for interlock circuits, or added circuit capacity. NOTE: Seismic & radiation tested E7000 models are available. Consult factory for detailed information. Dimensions are shown for 1248 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. To increase the versatility of the basic timer models, auxiliary switches may be added to either on-delay or off-delay types. They switch additional circuits, provide two-step timing action, or furnish electrical interlock for sustained coil energization from a momentary impulse, depending on the type selected and its adjustment. Because of their simple attachment and adjustment features, they can be installed at the factory or in the field, by any competent mechanic. All auxiliary switches are SPDT with UL listings of 10A @ 125, 250, or 480 VAC. A maximum of one Code T or two Code L auxiliary switches may be added to each relay. The L or LL switch is available with on-delay relays only. The T switch is available with both the on-delay and off-delay relays. Auxiliary Switch Options for On-Delay Instant Transfer (Auxiliary Switch Code L, maximum of 2 per relay.) 1. Energizing coil begins time delay and transfers auxiliary switch. 2. Main switch transfers after total preset delay. 3. De-energizing coil resets both switches instantly. Auxiliary switch is nonadjustable. Two-Step Timing (Auxiliary Switch Code T, maximum of 1 per relay.) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Auxiliary switch options To increase the versatility of the basic timer models, auxiliary switches may be added to either on-delay or off-delay types. They switch additional circuits, provide two-step timing action, or furnish electrical interlock for sustained coil energization from a momentary impulse, depending on the type selected and its adjustment. Because of their simple attachment and adjustment features, they can be installed at the factory or in the field, by any competent mechanic. All auxiliary switches are SPDT with UL listings of 10A @ 125, 250, or 480 VAC. A maximum of one Code T or two Code L auxiliary switches may be added to each relay. The L or LL switch is available with on-delay relays only. The T switch is available with both the on-delay and off-delay relays. Auxiliary Switch Options for On-Delay Instant Transfer (Auxiliary Switch Code L, maximum of 2 per relay.) 1. Energizing coil begins time delay and transfers auxiliary switch. 2. Main switch transfers after total preset delay. 3. De-energizing coil resets both switches instantly. Auxiliary switch is nonadjustable. Two-Step Timing (Auxiliary Switch Code T, maximum of 1 per relay.) 1. Energizing coil begins time delay. 2. After first delay auxiliary switch transfers. 3. Main switch transfers after total preset delay. 4. De-energizing coil resets both switches instantly. First delay is independently adjustable, up to 30% of overall delay. (Recommended maximum 100 seconds.) Auxiliary Switch Options for Off-Delay In these models the same auxiliary switch provides either two-step timing or instant transfer action, depending on the adjustment of the actuator. Two-Step Timing (Auxiliary Switch Code T, maximum of 1 per relay.) 1. Energizing coil transfers main and auxiliary switches instantly. 2. De-energizing coil begins time delay. 3. After first delay auxiliary switch transfers. 4. Main switch transfers after total preset delay. First delay is independently adjustable, up to 30% of overall delay. (Recommended maximum 100 seconds.) Instant Transfer (Auxiliary Switch Code L, maximum of 1 per relay.) 1. Energizing coil transfers main and auxiliary switches instantly. 2. De-energizing coil resets auxiliary switch and begins time delay. 3. Main switch transfers after total preset delay. Auxiliary switch is factory adjusted to give instant transfer operation, but may be easily adjusted in the field to provide two-step timing. On-delay, off-delay model 7032 (double head) The Double Head model provides delayed switch transfer on energization of its coil, followed by delayed resetting upon coil deenergization. Each delay period is independently adjustable. In new circuit designs or the improvement of existing controls now using two or more conventional timers, the Double Head unit offers distinct advantages. Its compact design saves precious panel space, while the simplified wiring reduces costly interconnection. On-delay, off-delay model 7032 (double head) With the addition of an extra switch block at the bottom of the basic unit, this version of the Series 7000 offers four pole switch capacity with simultaneous timing or two-step timing. The two-step operation is achieved by factory adjustment to your specifications. For two-step operation, a maximum timing ratio between upper and lower switches of 3:2 is recommended. Once adjusted at the factory, this ratio remains constant regardless of changes in dial settings. (Ex: If upper switch transfer is set on dial at 60 sec., minimum time on lower switch should be 40 sec.) This Series 7000 unit offers many of the performance features found in basic models - voltage ranges, timing and switch capacities are virtually identical. Four pole models add approximately 1-1/4" to the maximum height of the basic model, approximately 1/8" to the depth. They are designed for vertical operation only. Surge/transient protection option Features * Protect electronic control circuits from voltage transients generated by the timer coil. * Fast response to the rapidly rising back E.M.F. * High performance clamping voltage characteristics. * UL recognized, (except varistor and coil together). * Timer NOT polarity sensitive. The Surge/Transient Protection Option protects electronic control circuits from transients and surges which are generated when the timer coil is activated. Built with a minimum of moving parts, the unit provides a fast response to rapidly rising voltage transients. The accurate, precision-made device is not polarity sensitive and permits the user to initiate, delay, sequence and program equipment actions over a wide range of applications under the most severe operating conditions. It consists of a specially modified coil case, varistor, varistor cover, terminal extensions and cup washers so that normal terminations can be used. The varistor will not affect the operating characteristics of the 7000 Timer. The varistor has bilateral and symmetrical voltage and current characteristics and therefore can be used in place of the back-to-back zener diodes. This characteristic also means that the coil will not be polarity sensitive. Transient Suppressor Option "V" Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1249 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Timing Specifications (All values shown are at nominal voltage and 25C unless otherwise specified). Operating Modes: Model 7012/7014: On-delay (delay on pick-up). Model 7022/7024: Off-delay (delay on drop-out). Model 7032: On-delay, off-delay (double head). Timing Adjustment: Timing is set by simply turning the calibrated dial to the desired time value. In the zone of approximately 25 separating the high and low end of timing ranges A,D,E, and K, instantaneous operation (no time delay) will occur. All other ranges produce an infinite time delay when the dial is set in this zone. Models 7014 and 7032 are available with letter-calibrated dials only. The upper end of the time ranges in these models may be twice the values shown. Linear Timing Ranges: Models 7012, Models 7014, Code 7022, 7024 7032 A .1 to 1 Sec. .2 to 2 Sec. B .5 to 5 Sec. .7 to 7 Sec. C 1.5 to 15 Sec 2 to 20 Sec. D 5 to 50 Sec. 10 to 100 Sec. E 20 to 200 Sec. 30 to 300 Sec. F 1 to 10 Min. 1.5 to 15 Min. H 3 to 30 Min. 3 to 30 Min. I 6 to 60 Min. Not Avail. J 3 to 120 Cyc. Not Avail. K 1 to 300 Sec. Not Avail. Repeat Accuracy: For delays of 200 seconds or less: 7012*, 7022, 7024: +5% 7014*: +10% 7032: +15% For delays greater than 200 seconds: 7012*, 7022, 7014*, 7024: +10% 7032: +15% * The first time delay afforded by Model 7012 with H (3 to 30 min.) and I (6 to 60 min.) time ranges or Model 7014 with H time range will be approx. 15% longer than subsequent delays due to coil temperature rise. Reset Time: 50 msec. (except model 7032) Relay Release Time: 50 msec. for on-delay models (7012/7014) Relay Operate Time: 50 msec. for off-delay models (7022/7024) Operating Voltage Coil Data (for DPDT) Coil Part # Code Letter Rated Voltage 7000 A B C D E F G H I J K 120 240 480 550 24 AC 12 6 208 L 7010 DC M N O P Q R S T U V W Y Z X 28 48 24 125 12 60 250 550 16 32 96 6 220 Operating* Voltage Range @ 60Hz 102-132 204-264 408-528 468-605 20.5-26.5 110 220 Operating Voltage Range @50Hz 93.5-121 187-242 127 240 108-140 204-264 Rated Voltage 10.2-13.2 5.1-6.6 178-229 Dual Voltage Coil (Combines A&B) Special AC Coils (L1, L2, etc.) 22.4-30.8 38.4-52.8 19.2-26.4 100-137.5 9.6-13.2 48-66 200-275 440-605 12.8-17.6 25.8-35.2 76.8-105.6 4.8-6.6 176-242 Special DC Coils (X1, X2, etc.) *Four pole Models: Operational voltage range 90% to 110% for AC units; 85% to 110% for DC units. Minimum operating voltages are based on vertically mounted 7012 units. 7012 horizontally mounted or 7022 vertically or horizontally mounted units will operate satisfactorily at minimum voltages approximately 5% lower than those listed. AC units drop out at approximately 50% of rated voltage. DC units drop out at approximately 10% of rated voltage. All units may be operated on intermittent duty cycles at voltages 10% above the listed maximums (intermittent duty - maximum 50% duty cycle and 30 minutes "on" time.) Surge/Transient Protection Option Characteristics (DC Timers Only) Coil Voltage Max Excess Max De-energization Nominal (DC) Energy Capacity (Joule) Transient Voltage 12 V 24 V 28 V 32 V 48 V 60 V 96 V 110 V 125 V 220 V 250 V 0.4 J 1.8 J 1.8 J 2.5 J 3.57 J 6J 10 J 10 J 10 J 17 J 17 J 48 V 93 V 93 V 135 V 145 V 250 V 340 V 340 V 340 V 366 V 366 V Surge Life Applied 100,000 times continuously with the interval of 10 seconds at room temperature. Below 68 VAC: 12A; Above 68 VAC: 35A Temperature Range Operating: -22F to +167F (-30C to + 75C) Storage: -40F to +167F (-40C to +75C) Output/Life Contact Ratings: Contact Capacity in Amps (Resistive Load) Contact Min. 100,000 Min. 1,000,000 Voltage Operations Operations 30 VDC 15.0 7.0 110 VDC 1.0 0.5 120 V 60Hz 20.0 15.0 240 V 60Hz 20.0 15.0 480 V 60Hz 12.0 10.0 10 Amps Resistive, 240 VAC 1/4 Horsepower, 120 VAC/240VAC (per pole) 15 Amps 30 VDC (per pole) 5 Amps, General Purpose, 600VAC (per pole) Dielectric: Withstands 1500 volts RMS 60Hz between terminals and ground. 1,000 volts RMS 60 Hz between non-connected terminals. For dielectric specification on hermetically sealed models consult factory. Insulation Resistance: 500 Megohms with 500VDC applied. Temperature Range: Operating: -20F to +165F (-29C to 74C) Storage: -67F to +165F (-55C to 74C) Temperature Variation: Using a fixed time delay which was set and measured when the ambient temperature was 77F (25C), the maximum observed shift in the average of three consecutive time delays was -20% at -20F (-29C) and +20% at 165F (74C). Mounting/Terminals: Normal mounting of the basic unit is in a vertical position, from the back of the panel. A front mounting bracket is also supplied with each basic unit, for installation from the front of the panel. All units are calibrated for vertical operation. Basic models (7012, 7022) may also be horizontally mounted, and will be adjusted accordingly when Accessory Y1 is specified in your order. Standard screw terminals (8-32 truss head screws supplied) are located on the front of the unit, with permanent schematic markings. Barrier isolation is designed to accommodate spade or ring tongue terminals, with spacing to meet all industrial control specifications. The basic Series 7000 may also be panel mounted with the addition of a panelmount kit that includes all necessary hardware and faceplate. This offers the convenience of "out-front" adjustment, with large calibrated dial skirt knob. The faceplate and knob blend with advanced equipment and console designs, while the body of the unit and its wiring are protected behind the panel. Other mounting options include plug-in styles and special configurations to meet unusual installation requirements. Contact factory for details. Power Consumption: Approximately 8 watts power at rated voltage . Approximate Weights: Models 7012, 7022 . . . . . . . 2 lbs. 4 ozs. 7014, 7024 . . . . . . . 2 lbs. 10 ozs. 7032 . . . . . . . . . . . . 3 lbs. 5 ozs. Weight may vary slightly with coil voltage. See next column for more coil data. Dimensions are shown for 1250 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Outline Dimensions (Dimensions in inches). Models 7012, 7022 Panel mount Option "X" Dimensions are shown for reference purposes only. Model 7032 Models 7014, 7024 Surge/Transient Protection Option Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1251 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Ordering Information Typical Part No. 70 1 2 A D GZ 1. Basic Series: 70 = 7000 series electropneumatic timing relay 2. Operation: 1 = On-delay 2 = Off-delay 3 = On-delay, off-delay (double head) 3. Contact Arrangement: 2 = 2PDT (2 form C) **4 = 4PDT (4 form C) 4. Coil Voltage: AC Coils A = 120VAC, 60 Hz.; 110VAC, 50Hz. B = 240VAC, 60 Hz.; 220VAC, 50Hz. C = 480VAC, 60 Hz. D = 550VAC, 60 Hz. E = 24VAC, 60 Hz. F = 127VAC, 50 Hz. G = 240VAC, 50Hz. H = 12VAC, 60 Hz. K = Dual voltage (combines A & B) L = Special AC coils (L1, L2, etc.) 5. Timing Range: Models 7012, 7022 & 7024 A = .15 to 3 sec. B = .5 to 5 sec. C = 1.5 to 15 sec. D = 5 to 50 sec. E = 20 to 200 sec. F = 1 to 10 min. H = 3 to 30 min. I = 6 to 60 min. J = 3 to 120 cyc. K = 1 to 300 sec. DC Coils M = 28VDC N = 48VDC O = 24VDC P = 125VDC Q = 12VDC R = 60VDC S = 250VDC T = 550VDC U = 16VDC V = 32VDC W = 96VDC Y = 6VDC Z = 220VDC X = Special DC coils (X1, X2, etc.) Models 7014 & 7032 For model 7032 specify separate time range code for each head. Example: AB. Any two ranges may be selected. A = .2 to 2 sec. B = .7 to 7 sec. C = 2 to 20 sec. D = 10 to 100 sec. E = 30 to 300 sec. F = 1.5 to 15 min. H = 3 to 30 min. 6. Options: A1 = Single quick-connect terminals (note 4). A2 = Double quick-connect terminals (note 4). B = Plug-in connectors (note 4). GZ = Enclosure with bottom knockouts (note 1). H2 = Hermetically sealed enclosure, 8 pin solder (notes 1 & 4). H3 = Hermetically sealed enclosure, 8 pin octal (notes 1 & 4). H4 = Hermetically sealed enclosure, 8 screw terminal block (notes 1 & 4). *H6 = Hermetically sealed enclosure, 11 pin solder (notes 1 & 4). *H7 = Hermetically sealed enclosure, 11 pin octal (notes 1 & 4). *H8 = Hermetically sealed enclosure, 11 screw terminal block (notes 1 & 4). l1 = Tamper-proof Cap, opaque black (Cannot be combined with Option X). l2 = Tamper-proof Cap, transparent (Cannot be combined with Option X). K = Explosion-proof Enclosure (note 1). L = Auxiliary Switch, instant transfer. 7012 only (notes 2 & 6). LL = Two Aux. Switches, instant transfer. On Model 7014 Factory Installed Only. (notes 2 & 6) M = Dust-tight Gasketing (notes 4 & 5). P = Octal Plug Adapter. Can be combined only with options l1,l2. M, S, X, or Y1. (note 4). S = Dial Stops. T = Auxiliary Switch, two-step timing (notes 2 & 6). V = Transient/Surge Protection (for DC coil voltage only). W = Watertight Enclosure (note 1). X = Panelmount includes hardware and adjustment for horizontal operation (note 4) Y1 = Horizontal calibration, for horizontal operation without panelmounting (note 4). Y2 = Horizontal calibration, with Compensating Spring for vertical operation (note 4). Notes: 1. Cannot be combined with B, P or X Options 2. Cannot be combined with B, P or Y2 Options 3. Cannot be combined with GZ, H, l1, l2, K, W or Y1 Options 4. Not Avail. on 4-Pole Models 5. Not Available with L, T or LL options. 6. Not Available on hermetically sealed units. * Sized to accommodate one L or T Auxiliary Switch ** Not available on On-Delay, Off-Delay (Double Head) model. Available with letter calibrated dials only. Upper end of time range may be twice the value shown 120 cycles = 2 sec. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. 7012AA 7012AB 7012AC 7012AD 7012AE 7012AF 7012AH 7012AK 7012ACL Dimensions are shown for 1252 reference purposes only. 7012BC 7012NC 7012PA 7012PB 7012PC 7012PD 7012PF 7012PJ 7012PK 7012PKX 7012PJX 7022AA 7022AB 7022AC 7022AD 7022AE 7022AF 7022AH Dimensions are in inches over (millimeters) unless otherwise specified. 7022AI 7022AJ 7022AKT 7022BC 7022BK 7022PA 7022PB 7022PC 7022PK Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Ordering options - can only be orderd as factory installed options (Dimensions, where shown, are in inches.) A1 - Single Quick-Connect Terminals A2 - Double Quick-Connect Terminals B - Plug-In Connectors Use with Accessory "C" or "D" below. GZ - Total Enclosure H - Hermetically Sealed Enclosure I - Tamper-Proof Cover With knockouts for bottom connection. 3.16" W x 3.84" D x 7.63"H K - Explosion proof Enclosure L - Auxiliary Switch LL - Auxiliary Switch (Meets requirements for Class I, Groups C&D locations). 7.50"W x 6.00" D x 10.38" H M - Dustight P - Octal Plug Adapter S - Dial Stops Gasket Gasket V - Transient/Surge Protection T - Auxiliary Switch W - Watertight Enclosure (NEMA-4) 4.75" W x 4.44" D x 9.75" H Transient Protection X - Panelmount Kit Mounting hardware included. Accessories (Not available for 7032 models) Plug-In Receptacle (Accessory D) Plug-In Receptacle (Accessory C) Screw Terminals Catalog No. 700137. For use with "B" Option Quick Connect Terminals Catalog No. 700141. For use with "B" Option. Ordering options can only be ordered as factory installed options. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1253 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT 2100 series Miniature Electropneumatic Timing Relay Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Design Features * High Repeat Accuracy over voltage and temperature extremes * Hermetically sealed units are designed for high shock and vibration applications * Instant recycling - easy linear adjustment * Exclusive Dial Head adjustment - no needle valves * Delay ranges from milliseconds to 3 minutes * DPDT contacts Design & Construction Sealed patented timing head circulates air under controlled pressure through a variable orifice to provide adjustable timing. Circular-path Dial Head principle replaces traditional needle valve. Snap-action switch assembly provides sustained contact pressure during timing cycles. Specially designed over center mechanism assures flutterfree load transfer after extended delay periods. Precision-wound solenoid assembly supplies the basic motive force when the control circuit is closed. These assemblies are mounted in a rigid self-supporting framework within a steel enclosure. This rugged construction assures permanent alignment of all operating members, the key to this unit's long trouble-free operation. Operation Series 2112 (On-Delay) - Applying rated voltage to the solenoid coil starts the preset time delay. At the end of the delay period the NC contacts break and the NO contacts make. Contacts remain in this position until the coil is deenergized, when the switch instantaneously returns to its original position. De-energizing the coil, either during or after the delay period, will immediately (within 25 msec.) recycle the unit. It will then provide another full delay period on re-energization. Series 2122 (Off-Delay) - Applying rated voltage to the coil for at least 75 msec. (for accurate timing) will instantaneously transfer the switch, breaking the NC contacts and making the NO contacts. Contacts remain in this position as long as the coil is energized. The preset time delay period begins as soon as the coil is de-energized, at the end of which the switch returns to its original position. No power is required during the timing period. Reenergizing the coil, either during or after the delay period, will immediately start a new cycle with full delay period. Repeat Accuracy: NORMAL VERTICAL POSITION +5% at 25C; +7% at 85C; +8% at -55C. The average time between -55C and 85C will be within +20% of the average @ 25C with a proportionally reduced effect at lesser extremes. In extremely short delay settings an additional 8 msec. variation may result on AC models due to "half cycle" alternating current effect. Setting Tolerance: Factory time setting, when specified, subject to additional +5% tolerance. Position Sensitivity: HORIZONTAL POSITION: Approximately 5% increase from the initial time in the vertical position. INVERTED POSITION: Approximately 10% increase from the initial time in the vertical position. Reset Time: 2112 Series: 25 msec.; 2122 Series: 75 msec. Relay Release Time: 25 msec. (2112 Series) Relay Operate Time: 75 msec. (2122 Series) Operating Voltage: Coil Data Nominal Resistance Operating Ohms Code Voltage 10% M N P R Y 12VDC 28VDC 48VDC 110VDC 125VDC Code 30 131 500 3200 3380 S S T U Nominal Operating Voltage Resistance Ohms 10% 120V 60 Hz 190 (2112 Series) 120V 60Hz 285 (2122 Series) 240V 60Hz 765 115V 400Hz 2600 Transients: Insensitive to transients of +1500 VAC for 10 milliseconds Dielectric: 1000V RMS @ 60Hz between non-connected terminals. Contact Rating (DPDT Contacts): 30V DC 110V DC 120V 60Hz 120V 400Hz 240V 60Hz Inductive (Amps) 2 .75 3 2 1.5 Resistive (Amps) 10 1 10 10 5 Based on 100,000 operations electrical, 1,000,000 mechanical. Inductive and capacitive load should not have inrush currents that exceed five times normal operating load. Ambient Temperature Range: -55C to +85C Weight: Maximum, any unit - 17 ozs. Mounting/Terminals: Chassis mounting tabs, octal plugs and external (-4) or internal (-5) adjustment. Panel mounting back plate, internal adjustment, and solder hook terminals (-9). Operation (Listed values at nom. voltage, 25C unless noted). Operating Mode: 2112: On-delay (delay on pull-in); 2122: Off-delay (delay on drop-out) Timing Adjustment: All standard models offer easy linear adjustment over one of nine timing ranges listed below. For applications requiring frequent readjustment, the external knob model with calibrated dial is recommended. For tamper-proof installation or where readjustment is infrequent, the internal key model may be preferred. This model requires removal of the cover plate for timing adjustment. Hermetically sealed models provide a slotted adjusting screw under the cap nut on the top cover. Timing Ranges: Code Range Code Range A B C D E F .03 to .1 sec. .1 to .3 sec. .15 to 1.0 sec. .375 to 3.0 sec. .75 to 10.0 sec. 1.0 to 30.0 sec. G H J K L 2.0 to 60.0 sec. 5.0 to 120.0 sec. 5.0 to 180.0 sec. 1.5 to 30.0 cycles 3.0 to 120.0 cycles Dimensions are shown for 1254 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. --4 --5 --9 These are minimum standards; where more severe environmental conditions must be met, please consult the factory. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Outline Dimensions for Industrial Models (Dimensions in inches. Multiply by 25.4 to obtain millimeters.) Ordering Information for Industrial Models Typical Part No. 21 1 2 D 4 N B 1. Basic Series: 21 = 2100 Miniature electropneumatic timing relay 2. Operation: 1 = On-delay 2 = Off-delay 3. Contact Arrangement: 2 = DPDT (2 form C) 4. Operating Voltage: A = AC D = DC 5. Physical Characteristics: Code Enclosure Adjustment Connector Mounting 4= Unsealed External Knob Octal Plug Chassis Mount 5= Unsealed Internal Key Octal Plug Chassis Mount 9= Unsealed Internal Key Solder Hook Panel Mount Plate 6. Coil Voltage: M = 12VDC N = 28VDC P = 48VDC R = 110VDC Y = 125VDC S = 120VAC, 50/60 Hz. T = 240VAC, 60 Hz. 7. Timing Range: A = .03 to .1 sec. C = .15 to 1.0 sec. E = .75 to 10.0 sec. H = 5.0 to 120.0 sec. K = 1.5 to 30.0 cycles B = .1 to .3 sec. D = .375 to 3.0 sec. F = 1.0 to 30.0 sec. J = 5.0 to 180.0 sec. L = 3.0 to 120.0 cycles Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. None at present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1255 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Specifications for MIL-Spec and Hermetically Sealed Models Dielectric: In accordance with specification MIL-R6106E (ASG). Also withstands 1,000 Volts RMS at 60 Hz between non-connected terminals. Agastat timing relays perform to military specifications in Patriot missiles. Other: Agastat Miniature Timing Relays also conform to applicable Mil-Spec. requirements covering: Moisture Ozone Humidity Sunshine Sand/Dust Acoustic Noise Salt Spray Prolonged Storage Outline Dimensions for MIL-Spec and Hermetically Sealed Models (In inches. Multiply by 25.4 for millimeters). 8 pin solder hook or MS/AN Connector 8 pin solder hook or MS/AN Connector Panel Mount --9 Panel Mount --H1, --H3 Octal Plug (with internal adjustment or external adjustment knob Octal Plug (with internal adjustment or external adjustment knob Chassis Mount --H2 Chassis Mount --4, --5 Ordering Information for MIL-Spec and Hermetically Sealed Models Typical Part No. 21 1 2 D H1 N B 1. Basic Series: 21 = 2100 Miniature electropneumatic timing relay 2. Operation: 1 = On-delay 2 = Off-delay 3. Contact Arrangement: 2 = DPDT (2 form C) 4. Operating Voltage: A = AC D = DC 5. Physical Characteristics: Code Enclosure Adjustment Connector Mounting H1 = Hermetically Sealed External Screw Solder Hook Panel Mount Plate H2 = Hermetically Sealed External Screw Octal Plug Chassis Mount H3 = Hermetically Sealed External Screw "AN" Connector Panel Mount Plate 4= Unsealed External Knob Octal Plug Chassis Mount 5= Unsealed Internal Key Octal Plug Chassis Mount 9= Unsealed Internal Key Solder Hook Panel Mount Plate 6. Coil Voltage: M = 12VDC N = 28VDC P = 48VDC R = 110VDC Y = 125VDC S = 120VAC, 50/60 Hz. T = 240VAC, 60 Hz. U = 115VAC, 400 Hz. 7. Timing Range: A = .03 to .1 sec. C = .15 to 1.0 sec. E = .75 to 10.0 sec. H = 5.0 to 120.0 sec. K = 1.5 to 30.0 cycles B = .1 to .3 sec. D = .375 to 3.0 sec. F = 1.0 to 30.0 sec. J = 5.0 to 180.0 sec. L = 3.0 to 120.0 cycles Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. None at present. Dimensions are shown for 1256 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 SENSORS, MONITORS & PROTECTIVE RELAYS Alphanumeric Index Series Type Page CS ......................... Voltage Sensor .................................... 1302 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays . 301-336 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Relays with Forcibly-Guided Contacts.............. 36-79 6 Plug-in/Panel Mount General Purpose Relays............ 701-749 7 Power Relays & Definite Purpose Contactors...................... 89-131 8 Latching, Impulse & Rotary Relays ............................... 149-154 9 Automotive Relays ...................... 141-148 10 Solid State Relays & Input/Output Modules ................ 195-207 11 Time Delay Relays & Modules ....................................1201-1256 12 Sensors, Monitors & Protective Relays .................... 1301-1314 13 High Performance Relays and Contactors (overview) ....... 233-234 14 PMA/PMB ............ Three Phase Power Quality Monitor ... 1305 SDAS-01 ............... Current Monitor .................................. 1307 VCA ...................... Single Phase Undervoltage Relay ....... 1303 VMA ..................... Single Phase Undervoltage Relay ....... 1304 WD25 ................... Paralleling (Synch Check) Relay .......... 1308 WD2759 ............... Over/Undervoltage Relay .................... 1308 WD32 ................... Reverse Power Relay .......................... 1308 WD47 ................... Phase Sequence Relay ....................... 1308 WD5051 ............... 1 or 3-Phase Overcurrent Relay .......... 1308 WD81OU .............. Over/Underfrequency Relay ................ 1308 Steel-Cased Protective Relays Our KILOVAC steel-cased protective relays (listed below) are not described in this technical databook, as they do not represent the most cost effective solution for many new design requirements. Most customers find our plastic-cased KILOVAC WD... series products are more appropriate for many new industrial applications. However,we still offer our steelcased protective relays. For details on KILOVAC steel-cased protective relays consult your Tyco Electronics sales engineer or visit our website at www.tycoelectronics.com. NOTE: KILOVAC protective relays were previously sold under the WILMAR brand name. 1000 ................................... Loss of Phase, Undervoltage Relay 1800 ........................................................ Paralleling (volt) Relay 20-000 ............................................. Frequency, 56-66 Hz Relay 20-050-19 ........................................... Voltage/Frequency Relay 25-000 ........................................... Over/Underfrequency Relay 250 ..................................................... Over/Undervoltage Relay 700 ......................................................................... 1 & 3 Phase 700 .......................... 1 & 3 Phase, Adjustable Time Delay Relay 900 ........................................................ Phase Sequence Relay D100X .................................... Close Differential, 1 Phase Relay D101X .................................. Series Close Differential, 3 Phase WC1 & WCT1 ............. Overcurrent, Time Delay, 1 Phase Relay WC1G ........................... Power Factor & Ground Fault Detector WC3 & WCT3 ............. Overcurrent, Time Delay, 3 Phase Relay WCB ....................................................... Current Balance Relay WCD .................................................. Current Differential Relay WGD ............................ Power Factor & Ground Fault Detector WOF & WUF .............. Overfrequency & Underfrequency Relay WOUF ............ Over/Underfrequency, Time Delay Option Relay WOUV .................................... DC Over/Undervoltage DC Relay WOUVT .......................... Over/Undervoltage, Time Delay Relay WUV/WOV .................................... Under- & Overvoltage Relay WUV/WOV ........................ DC Under- & Overvoltage DC Relay WUVT/WOVT ..... Under- & Overvoltage with Time Delay Relay WSYN ........................... Voltage Frequency, Phase Angle Relay Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1301 Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CS series Solid State Hybrid Voltage Sensor * Close differential * Choice of two types - Fixed pick-up and knob adjustable drop-out - Knob adjustable pick-up and drop-out * Internal 2 Form C (DPDT) output relay Fixed Pick-up and Adjustable Drop-out Adjustable Pick-up and Drop-out File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Sensing Modes Engineering Data The CS can be used as an over or undervoltage sensor, depending upon whether the load is connected to the normally closed (NC) or normally open (NO) contacts of the sensor's output relay. Power Requirement: Typically less than 3VA or 3W. Duty Cycle: Continuous. Repeatability: 1%, max. Response Time: 10-25 ms, typ. Internal Relay Contact Arrangement: 2 Form C (DPDT). Internal Relay Contact Rating: 10A @ 28VDC , res., or 120VAC, 80% p.f. Reverse Polarity Protection: On DC types. Temperature Range: -10C to +55C. Temperature Coefficient: 0.2%/C, max. Enclosure: Plastic dust cover. Mounting: 8-pin octal style plug. Fits either 27E122 or 27E891 (snap-on) screw terminal sockets. Weight: 8 oz. (227g) approximately. Overvoltage sensor - The NC contacts are used. The relay remains deenergized until an overvoltage is sensed. Undervoltage sensor - The NO contacts are used. The relay remains energized until the voltage decreases to the preset level, where the sensor de-energizes the relay. Adjustable Voltage Sensor Operation Note 1 - As voltage increases, the relay will pick-up at its selected point and remain energized while voltage is maintained at that level or higher. VOLTAGE RELAY ENERGIZED Note 2 - As voltage decreases, after pick-up, the relay will drop-out at its selected point. HYSTERISIS 2 VOLTS RELAY DE-ENERGIZED NOTE 1 Ordering Information - Distributors are more likely to stock boldface items. Note 3 - Minimum hysterisis, the voltage differential between pick-up and drop-out, is typically 2% of pick-up. .560 (14.22) 2.406 MAX. (61.11) Dimensions are shown for Pick-Up (Volts) Drop-Out Range (Volts) Maximum Voltage CSJ-38-71010 CSL-38-31010 105 22 90-103 16-21 140VAC (50/60 Hz.) 32VDC Adjustable Pick-Up and Adjustable Drop-Out Part Number CSJ-38-70010 CSL-38-30010 CSL-38-40010 CSL-38-60010 Pick-Up Range Drop-Out Range* (Volts) (Volts) 92-140 20-30 40-58 92-140 90-138 18-28 38-56 90-138 Maximum Voltage 150VAC (50/60 Hz.) 32VDC 60VDC 150VDC Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) Outline Dimensions 1302 reference purposes only. Part Number * Actual maximum drop-out voltage is the selected pick-up voltage less the hysterisis voltage. NOTE 2 .600 MAX. (15.24) 2.937 MAX. (76.60) Fixed Pick-Up and Adjustable Drop-Out 1.781 MAX. (42.24) .875 (22.23) 1.187 (30.15) Dimensions are in inches over (millimeters) unless otherwise specified. AC INPUT Specifications and availability subject to change. + DC INPUT www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VCA series Single Phase Undervoltage Relay * Automatic reset minimizes equipment downtime. * Fixed pickup point prevents low voltage start-up. * Adjustable dropout point protects against undervoltage operation. * Delayed dropout prevents nuisance tripping. * Compact, inexpensive design saves space, reduces cost. * Solid state circuitry for enhanced accuracy and long life. * LED indicates normal voltage condition. File E60363 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Function Input Data Single phase undervoltage relay. Voltage: 120VAC, 240VAC. Power Requirement: 4W, max. Transient Protection: 120VAC ............... 30 joules 240VDC ............... 30 joules 120VAC ............... 10 joules 120VDC ............... 10 joules Sensing Specifications Voltage Set-Point Adjustment: Internal potentiometer (screwdriver adjustable) with linear calibrated dial. Response Time: Depending on severity of undervoltage: 0.1 - 1 sec. Accuracy: Repeat Accuracy: 0.2% Overall Accuracy: 1%. Environmental Data Output Data Arrangement: 1 Form C (SPDT). Rating: 7A @ 250VAC; 1/6 HP @ 250VAC; 300VA @ 120/240VAC; 3A @ 30VDC. Expected Mechcanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations at rated resistive load. Between Terminals and Case: 1,480V. Between Relay Contacts and Active Circuitry: 1,480V. Outline Dimensions and Wiring Diagram .278 (7.06) .763 (19.4) Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Status Indication: LED indicates normal voltage condition. Weight: 3.2 oz. (90.7g) approximately. Initial Dielectric Strength 2.00 (50.8) Temperature Range: Storage: -40C to +85C. Operating: -23C to +55C. Ordering Information OUTPUT RELAY Part Number VCAA VCAB Operating Voltage 120VAC 240VAC OUTPUT RELAY .286 (7.26) 2.00 (50.8) UNDER VOLTAGE ADJUST .170 DIA (4.32) ACCEPTS #8 SCREW Dimensions are shown for reference purposes only. INPUT VOLTAGE .250 (6.35) X .032 (.813) QUICK CONNECTS .885 (22.5) 1.25 (31.8) Dimensions are in inches over (millimeters) unless otherwise specified. Authorized distributors are likely to stock the following: None at present. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1303 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VMA series Single Phase, Plug-in Undervoltage Relay * Automatic reset minimizes equipment downtime. * Fixed pickup point prevents low voltage start-up. * Adjustable dropout point protects against undervoltage operation. * Locking potentiometer maintains selected set point. * Delayed dropout prevents nuisance tripping. * Plug-in mounting for easier installation. * Built-in protection against polarity reversal. * LED indicates normal voltage condition. File E60363 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Function Input Data Single phase undervoltage relay. Voltage: See ordering information. Power Requirement: 4W, max. Transient Protection: 24VAC ................. 1.5 joules 24VDC ................. 1.5 joules 48VDC ................. 10 joules 120VAC ............... 10 joules 125VDC ............... 10 joules 240VDC ............... 20 joules Reverse Polarity Protection: On DC models. Duty Cycle: Continuous. Sensing Specifications Voltage Set-Point Adjustment: Locking potentiometer with calibrated dial. Response Time: Standard 0.5 sec. delay on dropout. Accuracy: Repeat Accuracy: 0.5% under fixed conditions. Overall Accuracy: 1%. Temperature Coefficient: 0.02%/C (Max.). Environmental Data Output Data Arrangement: 2 Form C (DPDT). Rating: 7A @ 250VAC; 1/6 HP @ 250VAC; 300VA @ 120/240VAC; 3A @ 30VDC. Expected Mechcanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations at rated resistive load. Temperature Range: Storage: -30C to +60C. Operating: -10C to +55C. Mechanical Data Between Terminals and Case: 1,480V. Between Relay Contacts and Active Circuitry: 1,480V. Mounting: Octal plug. Fits 27E122 or 27E891 (snap-on) screw terminal socket. Order socket separately. Enclosure: Nylon cover protects against particles. Status Indication: LED indicates normal voltage condition. Weight: 6 oz. (168g) approximately. Outline Dimensions Ordering Information Initial Dielectric Strength Part Number VMAXEA VMAXAA VMAXBA VMAXOA VMAXEA VMAXEA Nominal Voltage 24VAC 120VAC 240VAC 24VDC 48VDC 125VDC Pick-Up (V) 21 104 209 21 42 109 Drop-Out Range (V) 15 to 20 78 to 99 156 to 199 15 to 20 31 to 40 81 to 103 Wiring Diagram (Bottom View) Authorized distributors are likely to stock the following: None at present. Dimensions are shown for 1304 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT PMA/PMB series Three Phase Power Quality Monitor PMA PMB Function Three phase power quality monitor. * Monitors deviation from nominal system voltage, phase imbalance, phase sequence and phase loss. * Locking potentiometer prevents tampering (PMA only). * Start-up delay permits staggered restarting (PMB only). * Four LEDs show nature of temporary/sustained faults. * 3-wire wye or delta connections for simple installation. * Calibrated nominal voltage potentiometer assures precise monitoring. * Superior transient immunity per ANSI C37.40. * Not fooled by back EMF. * 8 user-selectable thresholds - 4 undervoltage and 4 phase imbalance - match protection to load. * Manual or automatic reset for application flexibility. * Suitable for commonly used grounded or ungrounded three-phase systems. Monitoring Specifications Threshold Accuracy: 0.2% of the average of 10 consecutive measurements of the threshold point at any fixed temperature within the operating temperature range. 2% of the average of 10 consecutive measurements of the threshold point over the operating temperature range. Response Time: Phase loss and phase reversal: 2 line cycles +5 ms. Undervoltage and phase imbalance: See Figures 1 and 2 on the following page. File E60363 File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Outline Dimensions Input Data 110 to 120VAC; 208 to 240VAC; 380 to 440VAC; 440 to 480VAC; 550 to 600VAC.. Maximum Voltage: 132VAC for the 110 to 120VAC model; 264VAC for the 208 to 240VAC model; 484VAC for the 380 to 440VAC model; 528VAC for the 440 to 480VAC model; 650VAC for the 550 to 600VAC model. Frequency: 50/60 Hz. Power Requirement: 750mW. Transient Noise Immunity: ICS 2-230, ANSI C37.40. 2.18 (55) Nominal Voltage: 4.48 (114) 5.31 4.94 (135) (125) 1.78 (45) .89 (23) .32 (8) 3.35 (85) 3.85 (98) 1.67 (42) 3.35 (85) CAPTIVE CLAMP SCREW #8 HEAD #6-32 BODY Output Data .22 (6) .37 (9) .89 (23) .28 (7) Arrangement: 1 Form A (SPST-NO) + 1 Form B (SPST-NC). Rating: 8A @ 250VAC, resistive; 3A @ 30VDC, resistive; 1/4 HP @ 125/250VAC; 275VAC pilot duty. Expected Mechcanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations at rated resistive load. Adapter Plate .58 (15) 3.68 (93) 3.12 (79) Initial Dielectric Strength Between Input Terminals and Case or Active Circuitry: 2,200V. Between Relay Contacts and Active Circuitry: 1,500V. .218 (6) DIA. TYP. Environmental Data Temperature Range: Storage: -40C to +75C. Operating: -10C to +60C. Mechanical Data Mounting: Can be mounted on a flat surface with two screws or snapped on/off a furnished adapter plate which has been pre-mounted on a flat surface. Can also be mounted on a 300-volt machine tool relay channel using the adapter plate. Direct mounting (no adapter plate used) on a symmetrical DIN track is also possible. Termination: Screw terminals. Connections: 3 wire wye or delta. Vibration: Chatterless operation 5 to 60 Hz., 0.030 in.(0.762 mm) amplitude, 1 minute sweep. Status Indication: "Contacts Transferred" LED plus four additional LEDs to designate the specific fault that released the relay. Weight: 24 oz. (625g) approximately. .04 (1) 1.09 (27) .36 (9) 2.18 (55) Ordering Information PMA | LB | Series PMA = Power Quality Monitor with Locking Potentiometer Nominal Operating Voltage LA = 110 to 120VAC, 50/60 Hz. LB = 208 to 240VAC, 50/60 Hz. LG = 380 to 440VAC, 50/60 Hz. LC = 440 to 480VAC, 50/60 Hz. LD = 550 to 600VAC, 50/60 Hz. PMB = Power Quality Monitor with Start-Up Delay S | | | | | | L | Phase Imbalance Threshold L = Low (2-4%) H = High (5-10%) Status Indicators S = "Contacts Transferred" and four fault status indicators Authorized distributors are likely to stock the following: None at present. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1305 Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Operation Monitor Operation: When the input voltage parameters are normal, the "Contacts Transferred" LED will be on and relay is energized. Once the unit has responded to a fault by releasing the output relay and simultaneously extinguishing the "Contacts Transferred" LED, the nature of the fault that caused the release will be identified by one of the four fault status indicators. In the automatic reset mode, the status indicator will extinguish and the "Contacts Transferred" LED will re-light once all faults are corrected and restart delay period has expired. In the manual reset mode, the fault indicator will flash when all faults have been corrected, thus indicating that the unit is ready for manual reset. When manually reset, the flashing fault status indicator will extinguish and the "Contacts Transferred" LED will relight. Series PMA has a fixed start-up delay of approximately 375 milliseconds. Series PMB has a start-up delay, adjustable from 0 to 5 minutes, which permits staggered restarting of motors, etc., affected by a common power outage. If the unit is wired for manual reset, the external reset switch must also be opened. The output relay will remain in the transferred state until one of the fault conditions occur. (See Figures 1 and 2) Phase Loss Condition: If the voltage of any phase drops below 68% of the nominal voltage setting for more than two line cycles, the output relay will release. If back EMF accompanies the loss of a phase, the unit will sense the loss as a phase imbalance and the relay will drop out. Figure 1 Phase Reversal Condition: If any two phases become reversed for more than two line cycles, the output relay will release. Undervoltage Condition: By strapping, the user can select one of four undervoltage thresholds: 10%, 14%, 17% or 20% below the nominal voltage, which is entered by means of a calibrated potentiometer located on the front panel. When the average voltage drops below the selected threshold, a time delay shown in Fig. 1 is initiated. The unit then continues to monitor the severity of the fault and modifies the time delay accordingly. If the undervoltage condition persists, the time delay will expire and the output relay will release. Phase Imbalance Condition: The unit continuously averages the three phase voltages and recognizes individual deviations from the average. By strapping, the user can select one of four imbalance thresholds: Either 2.0%, 3.0%, 3.5%, 4.0%, or 5.0%, 7.0%, 8.5%, 10.0% depending on model. When any phase voltage deviates more than the selected percentage from the three phase average, a time delay as shown in Fig. 2 is initiated. The unit then continues to monitor the severity of the fault and modifies the time delay accordingly. If the phase imbalance condition persists, the time delay will expire and the output relay will release. Figure 2 Strapping Diagrams Typical Connection Diagram Undervoltage Threshold 6 7 10.0% TRANSFORMER (REQUIRED FOR LINE VOLTAGE >240VAC) STOP L2 10 9 10 9 10 17.0% OL's (IF USED) START 9 14.0% CONTROL VOLTAGE UP TO 240VAC L1 8 20.0% M L3 Low Phase Imbalance Threshold M 1 2 3 FORM A N.O. CONTACTS 7 8 6 U1 U2 UNDERVOLTAGE RESPONSE CURVES 11 12 4 FORM B N.C. CONTACTS 9 I1 I2 PHASE IMBALANCE RESPONSE CURVES 13 5 MAN. RESET 10 COMMON Model PMAL*SL or PMBL*SL 6 7 8 2.0% 3.0% 3.5% 4.0% 14 15 High Phase Imbalance Threshold OA VOLTAGE M OB VOLTAGE OC VOLTAGE LOAD Model PMAL*SH or PMBL*SH 6 7 8 5.0% 7.0% 8.5% 10.0% Dimensions are shown for 1306 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B SDAS-01 series 1.5 To 15 Amp AC Current Sensor * Zero insertion loss * Inductive coupling to power line * Choice of modes - Adjustable overcurrent sensor - Adjustable undercurrent sensor * Solid state sensing circuit * 1 Form C (SPDT) or 2 Form C (DPDT) internal relay Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Sensing Modes Figure 1 - Typical Overcurrent Time Delay Curves Overcurrent sensor - Detects a current in excess of the value determined by the potentiometer setting. A built-in time delay, 200 ms, minimum, allows for normal starting and surge currents. Actual time delay is dependent upon potentiometer setting and magnitude of overcurrent. Any overcurrent lasting longer than this causes the internal relay of the SDAS01 to energize. The relay will remain energized until sensor control voltage is removed, even if the overcurrent ceases to exist. Time In Seconds 10 Undercurrent sensor - Reacts to a complete loss of sense current, or any current of less than the potentiometer setting. Upon application of sensor control voltage, there is a nominal 350ms delay during which time power line current must begin. This delay gives line components time to turn on. If, at the end of the delay, sense current should decrease to less than the potentiometer setting of the SDAS-01 and remain there for approximately 350 ms, the internal relay of the SDAS-01 will energize. It will remain energized until either sense control current again exceeds the potentiometer setting, or until sensor control voltage is removed. 15 Amps 9 Amps 3 Amps 1.0 1.5 Amps 0.1 x1 Engineering Data Control Voltage: 24VAC 50/60 Hz./DC 10%. Sense-Current Range: 1.5 to 15 amps AC. Internal Relay Contact Data: 1 Form C (SPDT) type (code X1): 5A @ 28VDC or 2.5A @ 120VAC, res. 2 Form C (DPDT) type (code Y2): 2A @ 28VDC or 1A @ 120VAC, res. Set Point Variation: 25% over operating temperature range. Time Delay: Overcurrent sensor: 200 ms, min., after beginning of overcurrent. Actual delay is dependent upon potentiometer setting and magnitude of overcurrent (see Figure 1). Undercurrent sensor: 350 ms, typ.; 200 ms, min., from beginning of undercurrent after control voltage is applied. Power Requirement: 1.7W or 1.7VA @ 24VAC. Temperature Range: Storage: -40C to +85C. Operating: -25C to +70C. Enclosure: Plastic dust cover. Mounting: Socket. For sockets see KUP 3 pole sockets. Weight: 3.17 oz. (90g) approximately. x10 x100 Sense Current Greater Than Poteniometer x1000 Ordering Information - Distributors are more likely to stock boldface items. Undercurrent Sensors Part Number Contacts Mounting SDAS-01-7Y2S1024 SDAS-01-7X1S1024 DPDT, 2A DC/1A AC SPDT, 5A DC/2.5A AC Socket Socket Part Number Contacts Mounting SDAS-01-8Y2S1024 DPDT, 2A DC/1A AC Socket Overcurrent Sensors Outline Dimensions Wiring Diagrams - Bottom Views .291 MIN. (7.39) .125 (3.18) 1 Form C 2 .187 .002 (4.75 .005) INPUT VOLTS AC or DC 5 3 9 .515 MAX. (13.08) 2.718 MAX. (70.64) .281 (7.14) .078 (1.98) .020 TYP. (0.51) 6 1.531 MAX. (38.89) 1 4 2 5 7 8 A Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. 2 Form C 3 6 9 1.406 MAX. (35.71) 2 1 INPUT VOLTS AC or DC 5 3 B Specifications and availability subject to change. 7 9 4 6 www.tycoelectronics.com Technical support: 1307 Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD series DIN Rail or Screw Mounted Protective Relays * * * * * * WD25 Paralleling (Synch Check) Relays WD2759 Over/undervoltage Relays WD32 Reverse Power Relays WD47 Phase Sequence Relays WD5051 Single- or Three-Phase Overcurrent Relays WD81OU Over/Underfrequency Relays File E58048 DIN EN50022-35 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Overview Outline Dimensions The WD series offers several different models of protective relays in a common package that is suitable for either DIN rail or screw mounting. These flexible, multifunction devices offer user selectable voltages, sense currents and frequencies. Adjustable time delays are standard. This allows a single part number to be suitable for multiple applications, thereby reducing inventory costs. 16 X M3.5 1.38 (35.0) 2.87 (73.0) Specifications common to all models Power Consumption: 2.5VA, maximum. Contact Ratings: 5 amps, resistive, at 120VAC. 5 amps, resistive, at 30VDC. Isolation from Control to Sense Inputs: 2,500VAC. Mechanical Life: 10 million operations. Shock: 10g. Vibration: 0.062 (1.57) double amplitude at 10-55 Hz. Terminals: M3.5 screws. Maximum Wire Size: 2 x 24 AWG (2.5mm2) solid to DIN 46288 or 2 x 16 AWG (1.5mm2) stranded w/end sleeves. Operating Temperature Range: -40C to +60C. Enclosure: Plastic case (not sealed). Mounting Options: Snap mounts on standard DIN rail (DIN-EN 50022-35) or panel mounts with M4, M5, #8 or #10 screws. Weight: 14.4 oz. (400g) approximately. 4.41 (112.0) 0.35 (9.0) 2.95 (75.0) Installation and Maintenance Information Installation: To mount the WD series protective relay on a DIN rail, hook the top edge of the cutout on the base of the case over one edge of the DIN rail, then press the opposite side of the cutout containing the release clip over the opposite side of the DIN rail. To remove or reposition the relay, lever the release clip and move the relay as required. WD series relays should be installed in a dry location where the ambient temperature will be within the operating temperature range. Maintenance: WD series protective relays are solid state devices that require no maintenance. They are not designed to be serviced by the user. Consult KILOVAC customer service at 805-220-2023 if repairs should be necessary. Dimensions are shown for 1308 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. M5 M4 2.36 (60.0) 2.36 (60.0) 1.97 (50.0) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD25 Paralleling Relays * Function 25 * ANSI/IEEE C37.90-1978 WD25 Operation WD25 Calibration WD25 paralleling relays are used to ensure that two circuits are synchronized. When voltage, phase relationship and frequency are within the selected synchronizing limits, the output relay will energize. The WD25 paralleling relay allows for a generator to be brought online without damage or system disturbance. WD25 series with a "dead bus" feature will energize for a synchronized condition or an "on line" generator, "dead bus" condition. This "dead bus" feature allows the generator to energize a dead bus. The "double dead bus" feature permits paralleling of two buses when: (a) both the line voltages are equal and in phase, or (b) when either bus is "hot" and the other bus is "dead." The calibration marks on the faceplate are provided only as guides. Proper calibration requires using an accurate voltmeter. Use the following procedure to calibrate the WD25: 1. Remove the cover. 2. Adjust the SYNC VOLTAGE control fully counterclockwise (CCW). Apply nominal voltage to the LINE B (bus) sensing terminals. 3. Apply the maximum desired synchronization voltage to the LINE A (generator) terminals. This voltage should be in phase with LINE B (bus) voltage and have the same frequency. 4. Slowly adjust the SYNC VOLTAGE control clockwise (CW) until the relay energizes. WD25 Specifications Nominal Operating Range: 120, 208, 277 or 480 VAC, selectable. Maximum Sensing Range: 575VAC. Nominal Frequency Range: 40-400. Contact Form: 2 form C (DPDT). Sense Voltage: Voltage (nominal) 120 208 277 480 Synch Voltage (% of nom.) 6 - 30% ( 4- 20 electrical degree) Dead Bus Voltage (% of nom.) 10 - 70% (Dead Bus) Control Voltage: Model WD25 Input Voltage (VDC) Input Voltage (VAC) -0X1 18 to 54 - -0X2 13.5 to 32 - WD25 Controls -0X3 100 to 200 100 to 140 Ordering Information Typical Part Number B WD 25 -00 2 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 25 = Paralleling Relay. WD25 Connections 3. Dead Bus: 00 = Double Dead Bus 01 = Single Dead Bus 02 = Generator to Generator 4. Control Voltage: 1 = 18 to 54VDC 2 = 13.5 to 32 VDC 3 = 100-200VDC or 100-140VAC. Our authorized distributor is more likely to stock these items. WD25-001 WD25-013 WD25 Typical Hookup NOTE: For single dead bus option, connect the generator to 1 & 2 and the bus to 4 & 5. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1309 Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD2759 Over/Undervoltage Relays * Function 27/59 * ANSI/IEEE C37.90-1978 WD2759 Operation WD2759 Calibration WD2759 AC voltage sensing relays provide voltage monitoring and protection in AC systems from 50 to 400 Hz. Sensing voltages, number of phases, over and undervoltage setpoint, and time delays are user configured. WD2759 voltage relays operate when the externally adjustable trip point is reached. An external time delay control is provided with an adjustment of .5 to 10 seconds. This time delay may be used to prevent false tripping when there are slight variations in the voltage supply. On overvoltage (OV) the output relay energizes when the input signal exceeds the trip point. On undervoltage (UV) the output relay de-energizes when the input signal goes below the trip point. A green LED indicates power to the relay. Red LED lights indicate the state of the undervoltage and overvoltage trips. The calibration marks on the faceplate have a maximum error of 10% and are provided only as guides. Proper calibration requires using an accurate voltmeter in parallel with the input signal. Use the following procedure to calibrate your relay. WD2759 Specifications Nominal Operating Range: 120, 208, 277 or 480 VAC, selectable. Maximum Sensing Range: 700VAC. Nominal Frequency Range: 50-400 Hz. Contact Form: 1 form C (SPDT) for undervoltage and 1 form C (SPDT) for overvoltage. Time Delay Adjustment: 0.5 to 10 sec. Sense Voltage: Voltage (nominal) 120 208 277 480 UV Adjustment Range 72-120 125-208 166-277 288-480 OV Adjustment Range 120-168 208-291 277-388 480-672 Control Voltage: Model WD2759 Input Voltage (VDC) Input Voltage (VAC) -001 18 to 54 - -002 13.5 to 32 - -003 100 to 200 100 to 140 Ordering Information Typical Part Number B OVER VOLTAGE 1. Remove cover. 2. Adjust the TRIP SET control fully clockwise (CW) and the TIME DELAY control fully counterclockwise (CCW). 3. Apply the desired trip voltage to the relay. 4. Slowly adjust the TRIP SET control CCW until the relay trips. 5. Remove the applied voltage (do not change the voltage level) and set the TIME DELAY control to the desired time delay. 6. Apply the trip voltage to the relay and measure the time to trip. 7. Adjust the TIME DELAY and repeat steps 4 and 5 until you have the desired time delay. UNDER VOLTAGE 1. Remove cover. 2. Adjust the TRIP SET control fully CCW and the TIME DELAY control fully CCW. 3. Decrease the applied sensing voltage from the nominal value until the desired tripping voltage is reached. 4. Slowly adjust the TRIP SET control CW until the relay trips. 5. Set the TIME DELAY control to the desired time delay and apply nominal voltage to the relay. 6. Step down the applied voltage from nominal to a level jest below the trip level set in Step 3 and measure the time delay. 7. Adjust the TIME DELAY and repeat steps 4 and 5 until the desired time delay is achieved. WD2759 Controls WD 2759 -002 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 2759 = Over/Undervoltage Relay. 3. Control Voltage: 001 = 18 to 54VDC 002 = 13.5 to 32 VDC 003 = 100-200VDC or 100-140VAC. Our authorized distributor is more likely to stock these items. WD2759-003. WD2759 Connections WD2759 Typical Hookup Dimensions are shown for 1310 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD32 Reverse Power Relays * Function 32 WD32 Operation WD32 Calibration WD32 reverse power relays are used to monitor the direction of power from AC generators. This is accomplished by measuring I cos q. If current from the generator is reversed and exceeds the adjustable setting, the relay will trip. A 0.5 to 20 second time delay is provided. A correct setting of the trip point and time delay will prevent motorizing the generator and prevent tripping during transients that occur while synchronizing. A POWER LED indicates the condition of the power supply and a REVERSE POWER TRIP LED indicates the output status of the relay. The calibration marks on the faceplate have a maximum error of 10% and are provided only as guides. Proper calibration requires using an accurate Current Meter in series with the input current. Use the following procedure to calibrate your relay. REVERSE POWER 1. Remove cover. 2. Adjust the TRIP SET control fully clockwise (CW) and the TIME DELAY control fully counterclockwise (CCW). 3. Apply the desired trip current to the relay. NOTE: for the Reverse Power (WD32-00X) a resistive load must be used and for the Reverse KVAR (WD32-01X) an inductive load must be used. 4. Slowly adjust the TRIP SET control CCW until the relay trips. 5. Remove the applied Current and set the TIME DELAY control to the desired time delay. 6. Re-apply the Current (10% more than the trip current) to the relay and measure the time to trip. 7. Adjust the TIME DELAY and repeat steps 4 and 5 until you have the desired time delay. WD32 Specifications Nominal Operating Range: 120 to 480 VAC, 1 or 3 phase. Maximum Sensing Range: 575VAC. Nominal Sensing Current: 5A. Nominal Frequency Range: WD32-00X: 40-400 Hz.; WD32-01X: 60 Hz. Contact Form: 2 form C (DPDT). Time Delay Adjustment: 0.5 to 20 sec. Sense Current: Reverse Power Trip: 0.2 to 1.0A (4-20% of nominal sense current). Control Voltage: Model WD32 Input Voltage (VDC) Input Voltage (VAC) WD32 Controls -001 18 to 54 - -002 13.5 to 32 - -003 100 to 200 100 to 140 Ordering Information Typical Part Number B WD 32 -00 2 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 32 = Reverse Power Relay. 3. Load: 00 = Resistive (power) 01 = Inductive (Kvar, 60 Hz.) WD32 Connections 4. Control Voltage: 1 = 18 to 54VDC 2 = 13.5 to 32 VDC 3 = 100-200VDC or 100-140VAC. Our authorized distributor is more likely to stock these items. WD32-003 WD32-011 WD32 Typical Hookup Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1311 Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD47 Phase Sequence Relays * Function 47 * ANSI/IEEE C37.90-1978 WD47 Operation WD47 Calibration WD47 phase sequence relays are designed to monitor the correct phase rotation and loss of phase of three phase ac systems from 50 to 400 Hz. An incorrect phase sequence or loss of any phase will cause the WD47 to pickup. When the phase sequence is corrected or the lost phase is restored the contacts dropout. Red LED's light to indicate a fault condition. A green LED indicates power to the relay. The WD47 is often used to detect reverse phase rotation or loss of phase to generators, busses, motors, and transformers. The WD47 has no adjustments and no calibration is necessary. Proper operation may be verified as follows: 1. Apply a nominal, three-phase input with the correct phase sequence. The output relay should dropout and the green LED should light. 2. Apply a nominal, three-phase input with an incorrect phase sequence. The output relay should pickup and the red LED should light. 3. Apply only one or two phases with the correct phase sequence. The output relay should pickup and the red LED should light. WD47 Specifications Nominal Operating Range: 120 to 480 VAC. Maximum Sensing Range: 575VAC. Nominal Frequency Range: 40-400 Hz. Contact Form: 2 form C (DPDT). Control Voltage: Model WD47 Input Voltage (VDC) Input Voltage (VAC) -001 18 to 54 - WD47 Controls -002 13.5 to 32 - -003 100 to 200 100 to 140 Ordering Information Typical Part Number B WD 47 -002 1. Basic Series: WD = DIN mount Protective Relay. WD47 Connections 2. Type: 47= Phase Sequence Relay. 3. Control Voltage: 001 = 18 to 54VDC 002 = 13.5 to 32 VDC 003 = 100-200VDC or 100-140VAC. Our authorized distributor is more likely to stock these items. WD47-001 WD47 Typical Hookup Dimensions are shown for 1312 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD5051 1O and 3O Overcurrent Relays * Function 5051 WD5051 Operation WD5051 Calibration WD5051 AC current sensing relays provide current monitoring and protection in AC systems from 50 to 400 Hz. Nominal Sensing Current, Instantaneous Over Current setpoint, Time Over Current setpoint, and Time Over Current time delay are user configured. WD5051 current relays operate when the externally adjustable trip point is reached. An external time over current time delay control is provided with an adjustment of .5 to 20 seconds. This time delay may be used to prevent false tripping when there are slight variations in the sensed current. With control power applied, the Instantaneous Over Current (IOC) contacts pick-up when the input signal exceeds the IOC trip setpoint. Similarly, with control power applied, the Time Over Current (TOC) contacts pick-up after the preset time delay when the Sense Current rises above the TOC trip setpoint. The IOC contacts may also be configured to function as an under current relay. A green LED indicates power to the relay. Red LED lights indicate the state of the IOC and TOC trips. The calibration marks on the faceplate are provided only as guides. Proper calibration requires using an accurate ammeter in series with the current source. Use the following procedure to calibrate your relay: OVERCURRENT 1. Remover the cover. 2. Adjust the TRIP SET control fully clockwise (CW) and the TIME DELAY control (TOC only) fully counterclockwise (CCW). 3. Apply the desired trip current to the relay. 4. Slowly adjust the TRIP SET control CCW until the relay trips. 5. Remove the applied current (do not change the current level). Set the TIME DELAY (TOC only) control to the desired time delay. WD5051 Controls WD5051 Specifications Sense Current Full Scale: 1, 3, 6 or 8A, selectable. Maximum Sensing Current: 10A continuous; 30A for 10 sec.; 60A for 2.5 sec.; 100A for 0.9 sec.. Nominal Frequency Range: 50-400 Hz. Contact Form: 1 form C (SPDT) for IOC and 1 form C (SPDT) for TOC. TOC Time Delay Adjustment: 0.5 to 20 sec. IOC Operate Time (max.): 0.2 sec. Sense Current: Current (nominal) 1 3 6 8 IOC 0.2 to 1.2 0.6 to 3.6 1.2 to 7.2 1.6 to 9.6 TOC 0.2 to 1.2 0.6 to 3.6 1.2 to 7.2 1.6 to 9.6 WD5051 Connections Control Voltage: Model WD5051 Input Voltage (VDC) Input Voltage (VAC) -001 18 to 54 - -002 13.5 to 32 - -003 100 to 200 100 to 140 WD5051 Single Phase Model Ordering Information Typical Part Number B WD 5051 -002 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 5051 = Single Phase Overcurrent Relay. 5051-3 = Three Phase Overcurrent Relay. 3. Control Voltage: 001 = 18 to 54VDC 002 = 13.5 to 32 VDC 003 = 100-200VDC 0r 100-140VAC. WD5051-3 Three Phase Model Our authorized distributors are more likely to stock these items. WD5051-001 WD5051-003 WD5051-3-001 WD5051 Typical Hookup WD5051-3 Three Phase Model WD5051 Single Phase Model Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1313 Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD81OU Over/Underfrequency Relays * Function 81 OU * ANSI/IEEE C37.90-1978 WD81OU Operation WD81OU Calibration WD81OU frequency relays are used to provide frequency monitoring and protection to generators, buses, power supplies, and other equipment. The relay operates at voltages from 120 to 480 Vac and at nominal frequencies of 50, 60, and 400 Hz. External controls include nominal frequency selection, under frequency (UF) trip set, over frequency (OF) trip set, UF time delay, and OF time delay. A green LED indicates power to the relay. Red LED's indicate the status of the UF and OF trips. The calibration marks on the faceplate are provided only as guides. Proper calibration requires using an accurate frequency meter in parallel with the input signal. WD81OU Specifications Nominal Operating Frequency: 50, 60 or 400 Hz., selectable. Maximum Frequency @ 400Hz. Nominal: 1000 Hz. Nominal Sensing Voltage: 20-480VAC. Maximum Sensing Voltage: 575VAC. Contact Form: 1 form C (SPDT) for underfrequency and 1 form C (SPDT) for overfrequency. Time Delay Adjustment: 0.5 to 10 sec. Sense Frequency: Frequency (nominal) 50 60 400 UF Adjustment Range 40-50 48-60 360-400 OF Adjustment Range 50-60 60-72 400-480 Control Voltage: Model WD81OU Input Voltage (VDC) Input Voltage (VAC) -001 18 to 54 - -002 13.5 to 32 - -003 100 to 200 100 to 140 WD81OU Controls Ordering Information Typical Part Number B UNDER FREQUENCY 1. Remove the cover. 2. Set the SENSE FREQUENCY to the nominal system frequency. Adjust the Under Frequency TRIP SET fully clockwise (CW) and the TIME DELAY control fully counterclockwise (CCW). 3. Apply the desired trip frequency to the relay. 4. Slowly adjust the TRIP SET control CCW until the relay trips. 5. Set the TIME DELAY control to the desired time delay and apply nominal frequency to the relay. 6. Step down the applied frequency from nominal to just below the trip level set in Step 4 and measure the time delay. 7. Adjust the TIME DELAY and repeat steps 5 and 6 until the desired time delay is set. OVER FREQUENCY 1. Remove the cover. 2. Set the SENSE FREQUENCY to the nominal system frequency. Adjust the OF TRIP SET and TIME DELAY controls fully counterclockwise (CCW). 3. Apply the desired trip frequency to the relay. 4. Slowly adjust the TRIP SET control clockwise (CW) until the relay trips. 5. Set the TIME DELAY control to the desired time delay and apply nominal frequency to the relay. 6. Step down the applied frequency from nominal to just below the trip level set in Step 4 and measure the time delay. 7. Adjust the TIME DELAY and repeat steps 5 and 6 until the desired time delay is set. WD 81OU -002 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 81OU = Over/Underfrequency Relay. 3. Control Voltage: 001 = 18 to 54VDC 002 = 13.5 to 32 VDC 003 = 100-200VDC or 100-140VAC. Our authorized distributors are more likely to stock these items. None at present. WD81OU Connections WD81OU Typical Hookup Dimensions are shown for 1314 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 HIGH PERFORMANCE RELAY PRODUCTS Alphanumeric Index Series Type Page 0.100 Grid Relays ............................................................... 1403 Circuit Breakers ........................ 101-124 1 Transformers.............................. 201-212 2 Low-signal PC Board Relays . 301-336 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 1/5 Size Relays ................................................................... 1404 AC Contactors .................................................................... 1407 AC/DC Contactors .............................................................. 1408 AC and DC High Voltage Contactors .................................. 1409 DC Automatic Dropout Contactors .................................... 1409 DC Contactors .................................................................... 1407 DC Reverse Current Contactors......................................... 1408 Full Size Relays .................................................................. 1404 Half Size Relays .................................................................. 1404 High-Frequency Relays ...................................................... 1403 High Voltage DC Contactors .............................................. 1410 High Voltage Relays to 9kV ................................................ 1410 High Voltage Relays to 70kV .............................................. 1411 Monitors ............................................................................. 1408 Over/Under Frequency Relays ........................................... 1412 Over/Under Voltage Relays ................................................ 1412 Paralleling Relay ................................................................. 1412 Phase Sequence Relay ....................................................... 1412 Plug-In Contactors .............................................................. 1408 Power Distribution Systems .............................................. 1409 Protective Relays ............................................................... 1412 NOTE: This section of the databook provides only a brief overview Relays with of our CII, HARTMAN and KILOVAC high performance relay products. For more detailed Forcibly-Guided Contacts.............. specifications on these products, visit 36-79 our website at www.tycoelectronics.com. 6 Plug-in/Panel Mount General Purpose Relays............ 701-749 7 Power Relays & Definite Purpose Contactors...................... 89-131 8 Latching, Impulse & Rotary Relays ............................... 149-154 9 Automotive Relays................ 1001-1025 10 Solid State Relays & Input/Output Modules ......... 1101-1125 11 Time Delay Relays & Counters ........................................ 208-232 12 Sensors & Monitors ................... 233-234 13 High Performance Relays and Contactors (overview) ... 1401-1412 14 Sensors .................................................................... 1405, 1408 Single Phase Overcurrent Relay......................................... 1412 Solenoids ............................................................................ 1406 Solid State Relays .............................................................. 1405 Space Contactors ............................................................... 1409 T0-5 Relays ......................................................................... 1402 Three Phase Overcurrent Relay ......................................... 1412 Timers ................................................................................ 1405 Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 1401 Refer to inside back cover. Catalog 1308242 Issued 3-03 CII High Performance Signal Level Relays P/N Series HM HMD HS HSD MA 1MA MAD 1MAD MADD 1MADD MAT 1MAT MAV MAVD MAVDD MS 1MS MSD 1MSD MSDD 1MSDD MST 1MST MSV MSVD MSVDD PRMA PR1MA PRMAD PR1MAD PRMADD PR1MADD PRMAT PR1MAT PRMS PR1MS PRMSD PR1MSD PRMSDD PR1MSDD PRMST PR1MST Contact Form Contact Rating 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 2 Form C 2 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 2 Form C 2 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Coil Voltage 5 to 30 Vdc 5 to 30 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 30 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 30 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 48 Vdc 5 to 40 Vdc 5 to 48 Vdc 5 to 40 Vdc 5 to 48 Vdc 5 to 40 Vdc 5 to 48 Vdc 5 to 40 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 30 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 48 Vdc 5 to 40 Vdc 5 to 48 Vdc 5 to 40 Vdc 5 to 48 Vdc 5 to 40 Vdc 5 to 48 Vdc 5 to 40 Vdc Temperature Rating -55 to +85C -55 to +85C -55 to +85C -55 to +85C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C Vibration 10 G's 10 G's 10 G's 10 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 380 G's 380 G's 380 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 380 G's 380 G's 380 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's Shock Mil-Spec 30 G's 30 G's 30 G's 30 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 150 G's 150 G's 150 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 150 G's 150 G's 150 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's Commercial Commercial Commercial Commercial M39016/9 M39016/7 M39016/15 M39016/23 M39016/20 M39016/24 M28776/1 M28776/5 M39016/9 Design M39016/15 Design M39016/20 Design M39016/11 M39016/10 M39016/16 M39016/25 M39016/21 M39016/26 M28776/3 M28776/4 M39016/11 Design M39016/16 Design M39016/21 Design COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* RF Performance (GHz) Spreader Pads Long Life Version Transistor Version Standard Version Diode Version Standard Version Sensitive Coil Sensitive Version Standard Coil * Hermetically Sealed * Standard or Sensitive Coils * Optional Diodes/Transistors Dual Diode Version T0-5 Relays Features/Options 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 * Commercial-Off-The-Shelf Dimensions are shown for 1402 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 CII Contact Form Contact Rating 2 Form C HC 2 Form C HCD 2 Form C HCS 2 Form C HCSD 2 Form C SHC 2 Form C SHCD 2 Form C SHCS 2 Form C SHCSD 2 Form C MGA 2 Form C MGAD 2 Form C MGADD 2 Form C MGAT 2 Form C SMGA 2 Form C SMGAD 2 Form C SMGADD 2 Form C MGS 2 Form C MGSD 2 Form C MGSDD 2 Form C MGST 2 Form C SMGS 2 Form C SMGSD 2 Form C SMGSDD 2 Form C PRMGA 2 Form C PRMGAD PRMGADD 2 Form C 2 Form C PRMGAT 2 Form C PRMGS 2 Form C PRMGSD PRMGSDD 2 Form C 2 Form C PRMGST * Commercial-Off-The-Shelf Coil Voltage Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 26.5 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 26.5 Vdc Temperature Rating Vibration Shock -55 to +85C -55 to +85C -55 to +85C -55 to +85C -55 to +85C -55 to +85C -55 to +85C -55 to +85C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C 10 G's 10 G's 10 G's 10 G's 10 G's 10 G's 10 G's 10 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's 75 G's Commercial Mil-Spec Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial M39016/17 M39016/18 M39016/19 M28776/6 M39016/17 Design M39016/18 Design M39016/19 Design M39016/41 M39016/42 M39016/43 M28776/7 M39016/41 Design M39016/42 Design M39016/43 Design COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* COTS Version* 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 P/N Series MW3 MW3S MW4 MW4S MW6 MW6S MW3HP MW3HPS MW4HP MW4HPS MW6 MW6HPS Contact Form Contact Rating 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Up to 1A Coil Voltage 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc Temperature Rating Vibration Shock -55 to +85C -55 to +85C -55 to +85C -55 to +85C -55 to +85C -55 to +85C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C 10 G's 10 G's 10 G's 10 G's 10 G's 10 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 30 G's 100 G's 100 G's 100 G's 100 G's 100 G's 100 G's Mil-Spec Grid Package T0-5 Package Ground Pins Sensitive Coil Sensitive Grid Package Standard T0-5 Package Standard Coil High Frequency Relays * Hermetically Sealed * Standard or Sensitive Coils * Standard or High Performance Versions * Excellent RF Performance RF Performance (GHz) Mounting Pads Surface Mount Version Features/Options RF Performance (GHz) P/N Series Diode Version Sensitive Version Sensitive Coil Surface Mount Version Standard Coil * Hermetically Sealed * Standard or Sensitive Coils * Optional Diodes/MOSFETs MOSFET Version MOSFET Version .100 Grid Relays Dual Diode Version High Performance Signal Level Relays Features/Options Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial 3 3 4 4 6 6 3 3 4 4 6 6 RF Performance Excellence - MW series high frequency relays are designed to provide excellent insertion loss repeatability over the frequency range from DC to 6 GHz. Exceptional isolation performance makes the MW series relays the logical choices for high performance RF applications. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back 1403 Catalog 1308242 Issued 3-03 CII 100 G's 100 G's 150 G's 100 G's 100 G's Coaxial Cables Version 2 Pole Version Contact Form Contact Rating 1 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 4 Form C 2 Form C 1 or 2 Form C 4 Form C 6 Form C Up to 10A Up to 2A Up to 4A Up to 5A Up to 2A Up to 4A Up to 5A Up to 2A Up to 2A Up to 2A Up to 2A Up to 2A Up to 2A Up to 2A Coil Voltage Temperature Rating Vibration Shock 6 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 26.5 Vdc 5 to 48 Vdc 5 to 48 Vdc 5 to 26.5 Vdc 6 to 26.5 Vdc 5 to 36 Vdc 5 to 48 Vdc 5 to 48 Vdc 6 to 26.5 Vdc 6 to 26.5 Vdc 6 to 26.5 Vdc -65 to +125C -55 to +85C -55 to +85C -55 to +85C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +85C -65 to +125C -65 to +125C 20 G's 10 G's 10 G's 10 G's 30 G's 30 G's 30 G's 30 G's 20 G's 30 G's 30 G's 20 G's 20 G's 20 G's 100 G's 30 G's 30 G's 30 G's 100 G's 100 G's 100 G's 100 G's 100 G's 100 G's 100 G's 100 G's 100 G's 100 G's Excellent RF Switching Long Life Version Optional Dual Diode Optional Diode Low Profile Features/Options 1 Pole Version * Hermetically Sealed * Optional Terminals * Optional Mounting Styles C HFC HFC4A HFC5A HFW HFW4A HFW5A HMB HMS LR LS RFK SR SS Mil-Spec M39016/13, 37, 38 M39016/14, 53, 54 M39016/31, 35, 36 Commercial Commercial Mil-Spec Excellent RF Switching Shock 30 G's 30 G's 30 G's 30 G's 30 G's Excellent RF Switching Vibration -65 to +125C -65 to +125C -65 to +125C -40 to +125C -40 to +125C Half Size Relays P/N Series Standard Coil Temperature Rating Coaxial Cables 5 to 36 Vdc 6 to 36 Vdc 6 to 26.5 Vdc 5 to 36 Vdc 6 to 36 Vdc Coaxial Cables Coil Voltage Long Life Version Up to 2A Up to 2A Up to 2A Up to 2A Up to 2A Sensitive Coil 2 Form C 4 Form C 4 Form C 2 Form C 4 Form C Optional Diode Contact Form Contact Rating Bifilar Coil 3SBC 3SBH 3SBM 3SCC 3SDH 2 Pole Standard Standard Coil P/N Series 4 Pole Grid Latching Design 4 Pole Grid * Hermetically Sealed * Optional Terminals * Optional Mounting Styles Grid Version 1/5 Size Relays Latching Design High Performance Subminiature Relays Features/Options M39016 Design Commercial Commercial Commercial M39016/6 M39016/6 Design M39016/6 Design M39016/22 M39016/44 M39016 Design Commercial Commercial M39016/40 M39016 Design 02 07 3SAM 3SDM FW FW5A RD4 RD6 RFB SF SF5A Contact Form Contact Rating 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 4 Form C 6 Form C 1 or 2 Form C 2 Form C 2 Form C Dimensions are shown for 1404 reference purposes only. Coil Voltage Up to 2A 6 to 26.5 Vdc Up to 10A 6-120 Vdc, 115 Vac Up to 2A 6 to 24 Vdc Up to 2A 6 to 24 Vdc Up to 3A 6.3 to 110 Vdc Up to 5A 6.3 to 110 Vdc Up to 2A 6 to 26.5 Vdc Up to 2A 6 to 26.5 Vdc Up to 2A 6 to 26.5 Vdc Up to 2A 1.8 to 40 Vdc Up to 5A 1.8 to 40 Vdc Vibration Shock -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +125C -65 to +85C -65 to +125C -65 to +125C 20 G's 30 G's 30 G's 30 G's 20 G's 20 G's 20 G's 20 G's 20 G's 15 G's 15 G's 100 G's 100 G's 150 G's 150 G's 100 G's 100 G's 100 G's 100 G's 100 G's 100 G's 100 G's Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Mil-Spec Multi-pole Configurations Optional Diode Latching Design ** 07 relay is also qualified to MS 27245 & MS27247 Temperature Rating Bifilar Coil Standard Full Size P/N Series 10 Amp Full Size Tall Full Size Standard Coil * Hermetically Sealed * Optional Terminals * Optional Mounting Styles Special Wiring Available Full Size Relays Features/Options M5757/8 M5757/23** M39016/32 M39016 Design M5757/10 M5757/10 Design M5757/7 M5757/1 M5757 Design M5757/13 Design M5757/13 Design www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 CII High Reliability Space Relays Products Services Features CII Hi-Rel products from Tyco Electronics are extensively tested to assure that your reliability standards and requirements are met or exceeded. Our services include: Half Size Non-Latching 1, 2, 4, 6 Form C configurations, low level to 10 amps switching Half Size Latching 2 and 4 Form C configurations, low level to 2 amps switching * High shock ratings * High vibration ratings * Latching versions * Class 100 cleanroom * Welded assemblies * Precision cleaning Applications * Small particle inspection 1/5 Size Non-Latching 2 and 4 Form C configurations, low level to 2 amps switching * Particle impact noise detection 1/5 Size Latching * High shock testing * Space satellites (telecommunications) * Weather tracking * Surveillance * Infrared observation instrumentation * Missile systems * Torpedo guidance circuits * Serialized test data 4 Form C, low level to 2 amps switching * Test profiles can be T0-5/.100 Grid tailored to individual 2 Form C, round and square outlines, low level to 1 amp switching customer requirements. * High vibration testing * X-ray testing * Qualification testing High Performance Solid State Relays JPS10 Series Ve rs CO ion T Av S ail ab le PS12-1Y Ve rs CO ion T Av S ail ab le JDS9-1Y Ve rs CO ion T Av S ail ab le DS13 Series Ve rs CO ion T Av S ail ab le Ve rs CO ion T Av S ail ab le DS11 Series DESC 88062 Qualified DESC 90091 Qualified M28750/9 Qualified M28750/10 Qualified DESC 86031Qualified 60 Vdc Output Voltage 60 Vdc Output Voltage 250 Vrms Output Voltage 250 Vrms Output Voltage 250 Vrms Output Voltage 2 Adc Output Current 2 Adc Output Current 2 Arms Output Current 25 Arms Output Current 10 Arms Output Current * Hermetically sealed DIP package * Thick film hybrid construction * Optically isolated * Low on-resistance (MOSFET output) * Optional switch status, short circuit protection, trip status * Hermetically sealed DIP package * Thick film hybrid construction * Optically isolated * Low on-resistance (MOSFET output) * Optional switch status, short circuit protection, trip status * Hermetically sealed DIP package * Thick film hybrid construction * Optically isolated * Zero voltage turn-on * High transient immunity * 3.8-32 Vdc current regulated input * Rugged encapsulated module * Optically isolated * Zero voltage turn-on * High transient immunity * 3.8-32 Vdc current regulated input * Rugged encapsulated module * Optically isolated * Zero voltage turn-on * High transient immunity * 3.8-32 Vdc current regulated input High Performance Timers and Sensors Timers - Relay Output Sensors PR NE OD W UC T Timers - Solid State Output High Performance DC Solid State Relay / Power Controller 1800/1900 Series 1600/1700 Series 1300/1350 Series Delay on operate, adjustable or fixed time delay, optional mounting styles Delay on operate, adjustable or fixed, AC or DC input, optional mounting styles Voltage sensors, DC and AC input, optional mounting styles 4800 Series 4600/4700 Series 1400 Series Interval timers, fixed time delay, optional mounting styles Interval timers, adjustable or fixed, AC or DC input, optional mounting styles Phase sensors, 60 or 400 Hz, optional mounting styles 6001/6155 Series 5600/5700 Series 7000 Series Delay on operate, fixed time delay, 14 pin metal DIP, thick film hybrid, meets Mil-R-83726/13 Delay on release, adjustable or fixed, optional mounting styles Frequency sensors, 50 to 440 Hz, digital logic design, optional mounting styles 2400 Series Delay on operate, miniature package, fixed, optional mounting styles Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. PC2.5D10-2B 60 Vdc Output Voltage 2.5 Adc Output Current Built-in Circuit Protection * Combines isolated load switching and circuit protection capabilities * Fast acting, bounce free switching * Carries full rated current (2.5A) without heat sinking to 90C * Low output on-resistance and voltage drop * Meets surge requirement of MIL-STD-1275 & MIL-STD-740A * Nuclear tolerance tested * Hermetically sealed package * Thick film hybrid construction www.tycoelectronics.com Technical support: Refer to inside back cover. 1405 Catalog 1308242 Issued 3-03 CII High Performance DC Tubular Solenoids - Series 3000 Pull-Type Solenoid Push-Type Solenoid Switch-Type Solenoid Custom configurations available Custom configurations available Custom configurations available DC tubular pull-type solenoids are designed to provide up to 90 lbs of DC tubular push-type solenoids force with a maximum stroke of .500 inches. provide up to 50 lbs of force with a maximum stroke of .562 inches. Actual usable force will depend on the stroke and power level. Actual usable force will depend on the stroke and power level. Coils are available from 6 to 115 Vdc with a continuous duty power level of 2.2 to 54 watts and an intermittent duty power level of 12 to 585 watts. Coils are available from 6 to 115 Vdc with a continuous duty power level of 3 to 36 watts and an intermittent duty power level of 9 to 240 watts. DC tubular switch-type solenoids provide up to 120 lbs of force with a maximum stroke of 1 inch. Actual usable force will depend on the stroke and power level. Coils are available from 12 to 115 Vdc. Two coils are utilized, one energized at pull-in for extra force and a holding coil for continuous operation. Intermittent duty power level of 112 to 700 watts and a continuous power level of 3 to 14 watts. High Performance Custom Solenoids - Series 7000 Tyco Electronics can provide customized solenoids with many of the following features : Solenoid Styles Connector Styles Mounting Styles Plunger Styles High Temperature 400Hz AC Commercial AC Airframe Heavy Duty Two Coil Designs Pressure Sealed Flexible Leads Connector Assemblies Right Angle AN Connectors Square Flange AN Connectors Quick-Connects Screw, Solder & Stud Terminals Round Flanges Square Flanges Threaded Flanges Shaped Flanges Internal Threads External Threads Clevice Plungers Extension Plungers Captive Plungers Dimensions are shown for 1406 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 HARTMAN High Performance AC Contactors FEATURES: Side Stable Contactors Latching Contactors Center Off Contactors * High reliability * Meets requirements of Mil-R-6106 * Hermetic or gasket seal available * Repairable * Easily tailored to customer requirements P/N Current Rating Description DH-7YC 25 Amps 4PST N.O., 115/208 VAC, 400 Hz B-347A 25 Amps 3PDT, Double Break, 115/220 VAC, 400 Hz DH-14B-3 25 Amps 3PDT, 115/200 VAC, 400 Hz B-252 30 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz B-140C 30 Amps 3PDT, Center Off, 120 VAC, 60 Hz N-415A-1 30 Amps 3PDT, Double Break, 115/200 VAC, 400 Hz SA106E 30 Amps 3PDT, 115 VAC, 400/60 Hz DH-7ZAB 50 Amps 3PDT, 115/200 VAC, 400 Hz D-7GRZ 50 Amps 3PDT, 115/200 VAC, 400 Hz NN-301 50 Amps SPDT w/Time Delay on Pickup, 115 VAC, 400 Hz D-7GR 50 Amps 3PDT, 115/200 VAC, 400 Hz N-421A 50 Amps 3PST N.C., 115/200 VAC, 400 Hz D-18F 50 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz DR-18E-5 50 Amps 2SPST, Center Off, 115/208 VAC, 400 Hz B-227 60 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz B-138S 60 Amps 3PST N.O., 115/200 VAC, 300-600 Hz DH-7BC 60 Amps 3PDT, 115/208 VAC, 400 Hz BR-329BC 60 Amps 2PST N.O., 115 VAC, 60 Hz SA120B 60 Amps 3PDT, Side Stable, 115/200 VAC, 400 Hz NH-505 90 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz D-25BD 100 Amps 3PDT, 115/200 VAC, 400 Hz P/N Current Rating D-31TFA 100 Amps B-233R 120 Amps BH-201B 120 Amps D-100A 120 Amps B-435K-3 140 Amps B-233T 160 Amps B-451 175 Amps B-312D-1 175 Amps B-499 35/200A BR-301AY 200 Amps B-393P 200 Amps B-345LS 225 Amps B-394 250 Amps BH-124AA 250 Amps BH-360A 250 Amps B-430-1 275 Amps B-429A-1 300 Amps B-874L 335 Amps B-429CA 350 Amps B-479A-1 350 Amps B-484 500 Amps Description 3PDT, Center Off, 115/208 VAC, 400 Hz 3PDT, 115/200 VAC, 400 Hz 3PST N.O., 115/200 VAC, 400 Hz 3PST N.O., 115/200 VAC, 400 Hz 3PDT, Center Off, 115/200 VAC, 400 Hz 3PDT, 115/200 VAC, 400 Hz 3PST, Magnetic Latch, 115/200 VAC, 400 Hz 3PST N.O., 120/208 VAC, 50/60 Hz 3PDT, Double Break, 115 VAC, 400 Hz/28 VDC 3PST N.O., 115/200 VAC, 400 Hz 3PDT, Center Off, 120/208 VAC, 50/60/400 Hz 3PDT, Center Off, 115/200 VAC, 400 Hz 3PDT, 115/200 VAC, 400 Hz 3PDT, Center Off, 115/200 VAC, 400 Hz 3PDT, 115/200 VAC, 400 Hz 3PST, Magnetic Latch, 115/200 VAC, 400 Hz 3PST N.O., 115/200 VAC, 400 Hz 3PST, 200 VAC, 400 Hz 3PST N.O., 120/208 VAC, 400 Hz 3PST, Magnetic Latch, 120/208 VAC, 400 Hz 3PST, Magnetic Latch, 115/200 VAC, 400 Hz High Performance DC Contactors FEATURES: Side Stable Contactors Latching Contactors Center Off Contactors * High reliability * Meets requirements of Mil-R-6106 * Hermetic or gasket seal available * Repairable * Easily tailored to customer requirements P/N Current Rating Description A-837D 15/3A Latching Armature Relay, 28 VDC C-28 25 Amps 2PST N.O., Latching, 40 VDC D-7TD 50 Amps 2SPST 1 N.O. 1 N.C., 28 VDC D-7AC 50 Amps 2SPST 1 N.O. 1 N.C., 28 VDC DH-7KC-1 50 Amps 4PST 2 N.O. 1 N.C., 28 VDC N-208 50 Amps SPDT, Double Break, Magnetic Latch, 28 VDC NN-233C 60 Amps SPDT, Double Break, 28 VDC SD167A 100 Amps SPST, Side Stable, 28 VDC D-32AB 100 Amps 2SPST, Center Off, Double Break, 28 VDC N-417E 100 Amps SPDT, Double Break, 28 VDC A-885Y 100 Amps SPDT N.O. & N.C., 28 VDC NN-307 100 Amps SPST, Double Break, 28 VDC SDH128 100 Amps SPDT, Side Stable, 28 VDC NN-449B 100 Amps SPDT, Double Break, 28 VDC DH-16CH 131 Amps SPST, Latching, 31 VDC A-1077F 200 Amps SPST N.O., 28 VDC Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. P/N Current Rating A-871F 200 Amps A-1077B 230 Amps AH-965H 300 Amps A-1019 300 Amps A-876M 300 Amps K-300 300 Amps SD130A 400 Amps A-400B 400 Amps K-400 400 Amps A-981S 400 Amps AH-703F 400 Amps A-922F 600 Amps A-712T 600 Amps A-931F 600 Amps A-792ST 1000 Amps A-882 1600 Amps Specifications and availability subject to change. Description SPDT N.O. & N.C., 28 VDC SPDT, 28 VDC SPDT N.O. & N.C., 28 VDC 2PDT, Center Off, 28 VDC SPDT N.C., 28 VDC SPST N.O., 28 VDC SPST N.O., Double Break, 28 VDC SPST N.O., 28 VDC SPST N.O., 28 VDC SPDT, 28 VDC SPST N.O., 28 VDC 2PST N.O., 28 VDC SPST N.O., 28 VDC SPST N.O., 28 VDC SPST N.O., 28 VDC SPST N.O., 28 VDC www.tycoelectronics.com Technical support: Refer to inside back cover. 1407 Catalog 1308242 Issued 3-03 HARTMAN High Performance AC/DC Contactors FEATURES: Side Stable Contactors * High reliability * Meets requirements of Mil-R-6106 * Hermetic or gasket seal available * Lightweight construction * Easily tailored to customer requirements P/N Current Rating Description C-8B 15 Amps 2PDT N.C., 28 VDC, 60 or 400 Hz DH-7PF 50 Amps 4PST 2N.O. 2N.C., 28 VDC or 115 VAC, 400 Hz NN-233A 50 Amps SPDT, Double Break, 28 VDC or 115 VAC, 400 Hz P/N Current Rating Description D-14D 50 Amps 2SPST 1N.O. 1N.C., 28 VDC or 115 VAC, 400 Hz BH-316A 50 Amps 3PST, 28 VDC or 115 VAC, 400 Hz C-21Y 60 Amps SPST N.O., Dbl. Break, 28 VDC or 115 VAC, 400 Hz DC Reverse Current Contactors FEATURES: Specialty Contactors * High reliability * Meets requirements of Mil-R-6106 * Gasket sealed * Repairable * Easily tailored to customer requirements P/N Current Rating Description A-718AAP 100 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-700AQ-4 200 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-700ZF 300 Amps SPST N.O., 28 VDC, Cutout Reverse Current P/N Current Rating Description A-701D 400 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-702AAP 600 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-791M 1000 Amps SPST N.O., 28 VDC, Cutout Reverse Current Sensors & Monitors FEATURES: Voltage & Current Sensors Phase Rotation Sensors Ground Power Monitors Frequency Sensors * High reliability * Meets requirements of Mil-R-6106 * Hermetic or gasket seal available * Lightweight construction units available * Epoxy encapsulated units available P/N Current Rating Description AVR-869C SPDT, 28 VDC, 3 Sequence Relay E-312P 5 Amps SPDT, 28 VDC, 400 Hz, Overvoltage Sensor E-381 5 Amps SPDT, 130 VAC, 400 Hz, Undervoltage Sensor E-308AA 7.5 Amps SPDT, 120 VDC, 60 Hz, 3 Undervoltage Sensor E-329E 10 Amps 3PDT, 115 VAC, Drop Out Time Delay E-308AH 10 Amps 3PDT, 115 VAC, Drop Out Time Delay E-312A-1 10 Amps 2PDT, 440 VAC, 400 Hz, 3 Voltage Sensor E-348 0.25 Amp SPST N.O., 28 VDC, Overload Relay E-308 3 Amps SPDT, 28 VDC, Adjustment Pick-Up Voltage AVR-834 3 Amps SPDT, 28 VDC, DC Voltage Sensor E-311P 10 Amps 2PDT, 28 VDC, Drop Out Time Delay QR-50AF 0.25 Amp SPST, 115 VAC, Encapsulated Current Indicator QR-50DA 0.25 Amp SPST, 115 VAC, Encapsulated Current Indicator E-387 1 Amp SPDT, 115 VAC, 400 Hz, Current Sensor E-145AK-4 5 Amps SPST, 115 VAC, 3 Current Sensor BE-500G-1 50 Amps 3PST N.O., 120 VAC, Overload Current Sensor Q-50B 0.25 Amps SPDT, 28 VDC, Encapsulated Current Indicator P/N Current Rating Description Q-50AC 0.3 Amp SPDT, 28 VDC, Encapsulated Current Indicator CH-27 0.75 Amp 2PDT, 28 VDC, Current Sensor CH-26 1 Amp SPST, 28 VDC, Current Sensor A-848KK 75 Amps 2PST, 28 VDC, Automatic Drop Out A-772XTB 200 Amps SPST N.O., 28 VDC, Delayed Drop Out A-701P-1 400 Amps SPST N.O., 28 VDC, Remote Reset A-701P-3 500 Amps SPST N.O., 28 VDC, Remote Reset A-792CA 600 Amps 2PST N.O., 28 VDC, Automatic Drop Out E-326 1 Amp 115 VAC, 400 Hz, 3 Rotation Sensor E-326A 1 Amp 115 VAC, 60 Hz, 3 Rotation Sensor E-341 2 Amps SPDT, 208 VAC, 400 Hz, 3 Rotation Sensor E-326E 5 Amps SPDT, 460 VAC, 60 Hz, 3 Rotation Sensor E-145Z 25 Amps 2PST, 120/208 VAC, 400 Hz, Phase Loss Relay E-145Y 60 Amps 2PST, 120/208 VAC, 400 Hz, Phase Loss Relay E-327AD 1 Amp 2PST, 115 VAC, Ground Power Monitor E-384 3 Amps SPDT, 28 VDC, Under Frequency Sensor Plug-In Contactors FEATURES: Side Stable Contactors Latching Contactors Center Off Contactors P/N Current Rating BP-353 50 Amps DP-25BD 100 Amps DP-31C 100 Amps Dimensions are shown for 1408 reference purposes only. * Fast installation/removal time * Improved maintenance safety * High reliability * Meets requirements of Mil-R-6106 * Lightweight construction Description 3PST N.O., 115/200 VAC, 400 Hz 3PDT, 115/200 VAC, 400 Hz 3PDT, Center Off, 115/200 VAC, 400 Hz Dimensions are in inches over (millimeters) unless otherwise specified. P/N Current Rating Description BPE-494 175 Amps 3PST N.O., ELCU, 115/200 VAC, 400 Hz BP-494 275 Amps 3PST N.O., 115/200 VAC, 400 Hz BP-493-1 385 Amps 3PST, Magnetic Latch, 115/200 VAC, 400 Hz Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 HARTMAN DC Automatic Dropout Contactors FEATURES: DC Automatic Drop Out * High reliability * Meets requirements of Mil-R-6106 * Hermetic or gasket seal available Time Delay Relays Phase Imbalance Sensors Automatic Drop Out Contactors P/N E-55 B-178 Current Rating Description 2 Amps 4PDT, 28 VDC, Time Delay 60 Amps 3PST, 120/208 VAC, 400 Hz, Phase Sensor P/N A-757D Current Rating Description 600 Amps SPST, 28 VDC, Automatic Dropout @ 180 Amps AC & DC High Voltage Contactors High Voltage FEATURES: * High reliability * Meets requirements of Mil-R-6106 * Hermetic or gasket seal available * Lightweight construction units available * Repairable AC Contactors DC Contactors Center Off Contactors Latching Contactors P/N Current Rating Description CR-21A 5 Amps 3PST N.O., 440 VAC, 60 Hz or 380 VAC, 50 Hz B-329P 20 Amps 3PST N.O., Dbl. Break, 260/450 VAC, 400 Hz BR-393E 20 Amps 3PDT, Center Off, Dbl. Break, 380 VAC, 50 Hz 50 Amps 3PST N.O., 200 VAC, 400 Hz B-138DL 3PDT, Center Off, 200 VAC, 400 Hz B-140AA 60 Amps 3PDT, 200 VAC, 400 Hz B-138XAH 60 Amps 3PST N.O., 380 VAC, 50 Hz B-312CS 100 Amps B-125N 150 Amps 3PST N.O., 208 VAC, 400 Hz 160 Amps 3PST, Magnetic Latch, 230 VAC, 400 Hz B-493E P/N Current Rating Description B-459 250 Amps 3PDT, Center Off, 208 VAC, 400 Hz B-460 250 Amps 6PST, 208 VAC, 400 Hz B-461 250 Amps 3PDT, Center Off, 120/208 VAC, 400 Hz 3PST N.O., 208 VAC, 400 Hz BH-125TH 250 Amps B-124GL 250 Amps 3PDT, Center Off, Dbl. Break, 208 VAC, 400 Hz SPST N.O., 270 VDC AV-875 60 Amps SPST N.O., 110 VDC A-751D-1 150 Amps A-754JD 150 Amps SPST N.O., 120 VDC SPST N.O., 340 VDC A-751YC 650 Amps Space Contactors Space Relays FEATURES: * High reliability * Meets requirements of Mil-R-6106 * Hermetically sealed * Lightweight construction * High shock, vibration, and acceleration levels DC Latching Contactors P/N Current Rating Description N-409D 50 Amps 2PDT, Double Break, Magnetic Latch, 28 VDC P/N Current Rating Description N-208H 50 Amps SPDT, Double Break, Magnetic Latch, 40 VDC Power Distribution Systems Power Distribution Panels FEATURES: * Primary and secondary power distribution - Main power contactors - Secondary power contactors/relays - Current and voltage sensing - Logic/control signals Modular Units Standard Panels Modular Units * Contactors/circuit breaker plug-in units * Power management capabilities * Value added * Space saving/weight saving designs * Custom designs for specific applications Standard Panels * Utilizes plug-in line replaceable modules installed on a panel mounting system, or back-plane. LRMs may be contactors, circuit breakers, sensing units, ELCUs, etc. * Designed as a fault-free zone with no moving parts. Intended as a permanent installation on mother vehicle. FEATURES: * Weight savings over standard discrete components * Value added * Ease of maintenance * Reduced OEM labor * Utilizes actuator and contact assemblies from discrete contactors, bussed together and packaged in one or more enclosures with external power and control connections. * Optional current/voltage sensing, fuses, circuit breakers, power monitors, etc. FEATURES: * Lightest power distribution approach * Value added * Ease of maintenance * Reduced OEM labor These are just some of the HARTMAN products capabilities from Tyco Electronics: - Voltage, Current & Power Sensing - Over & Reverse Current - Over & Under Voltage - Over & Under Frequency - Ground Fault & Detection - Time Delay Dimensions are shown for reference purposes only. - Phase Sequence, Unbalance & Failure - Impedance Relays - Ripple Detection - Positive, Negative & Zero Sequence Voltage - Signal Amplification Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. - Turbine Starting - Trip-Free, Electrical & Mechanical Interlocking - Electrical & Magnetic Latching - Polarization - Power Switching www.tycoelectronics.com Technical support: Refer to inside back cover. 1409 Catalog 1308242 Issued 3-03 KILOVAC High Voltage DC Relays & Contactors 28 Vdc 3.0 kV Aerospace Power Relays Hi-Rel Satellite Relays Power Controllers P/N Series Carry Current AL50 AL90 AL150 AL350 AL500 50 amps 90 amps 150 amps 350 amps 500 amps High Voltage Reed Relay Power Switching* RF Ratings Contact Form Yes Yes Yes Yes Yes No No No No No SPST-NO SPST-NO SPST-NO SPST-NO SPST-NO 270 Vdc P/N Series Carry Current S02DNA 2 amps Power Switching* RF Ratings Contact Form Carry Only No SPST-NO 3.5 kV Vacuum Relays Gas Filled Relays Aerospace Power Relays Hi-Rel Satellite Relays Power Controllers P/N Series P/N Series Carry Current AP5A AP5B AP5C AP5P AP5R AP10A AP10B AP10P AP11A AP44P AP50X AP90X AP150X AP265X AP265P AP350X PD5A PD5B PD10A PD10B PD10P PD90X PD150X 5 amps 5 amps 5 amps 5 amps 5 amps 10 amps 10 amps 10 amps 10 amps 15 amps 50 amps 90 amps 150 amps 265 amps 265 amps 500 amps 5 amps 5 amps 10 amps 10 amps 10 amps 90 amps 150 amps Power Switching* RF Ratings Contact Form Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Special Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No No No No No No No No No No No No No No No SPST-NO SPST-NC SPDT SPST-Latch SPDT-Latch SPST-NO SPST-NC SPST-Latch SPST-NO SPST-Latch SPST-NO SPST-NO SPST-NO SPST-NO SPST-NO SPST-NO SPST-NO SPST-NC SPST-NO SPST-NC SPST-Latch SPST-NO SPST-NO HC-5 HC-3 HC-1 Carry Current 8 amps 15 amps 25 amps Power Switching* RF Ratings Contact Form Make Only Yes Carry Only No Yes Yes SPDT SPDT SPDT 5.0 kV High Voltage Reed Relays Vacuum Relays P/N Series Carry Current S06FNA K41A K41B K41C K41P K41R K40P 6 amps 30 amps 30 amps 30 amps 25 amps 25 amps 35 amps Power Switching* RF Ratings Contact Form Carry Only Yes Yes Yes Carry Only Carry Only Carry Only Yes Yes Yes Yes Yes Yes Yes SPST-NO SPST-NO SPST-NC SPDT SPST-Latch SPDT-Latch SPST-Latch 7.5 kV Medical Relays Gas Filled Relays 12-1800 Vdc Electric Vehicle Relays Specialty DC Power Relays and Contactors Integrated Sensing P/N Series Carry Current EV4 EV200 EV250A EV250B EV500 4 amps 200 amps 400 amps 400 amps 600 amps Power Switching* RF Ratings Contact Form Make Only Yes Yes Yes Yes No No No No No SPST-NO SPST-NO SPST-NO SPST-NC SPST-NO P/N Series Carry Current KM-13 KM-17 10 amps 10 amps Power Switching* RF Ratings Contact Form Make Only Make Only No No DPDT DPDT 9 kV High Voltage Reed Relay 2.0 kV High Voltage Reed Relay Vacuum Relay P/N Series Carry Current S06CBA K45C 6 amps 15 amps Dimensions are shown for 1410 reference purposes only. P/N Series Carry Current S06HBA 6 amps Power Switching* RF Ratings Contact Form Carry Only Yes SPST-NO Power Switching* RF Ratings Contact Form Carry Only Carry Only Yes Yes SPST-NO SPDT Dimensions are in inches over (millimeters) unless otherwise specified. * Consult Factory for Power Switching Level Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC High Voltage DC Relays & Contactors 8 kV 20 kV High Voltage Reed Relays Vacuum Relays Gas Filled Relays P/N Series Carry Current S06JNB HC-6 H-18 K47A K47B HC-4 HC-2 K44P 6 amps 8 amps 10 amps 12 amps 12 amps 15 amps 25 amps 50 amps Vacuum Relay Power Switching* RF Ratings Contact Form Carry Only Make Only Yes Yes Yes Yes No Yes Yes No Yes Yes Yes No No Yes SPST-NC SPDT SPDT SPST-NO SPST-NC SPDT SPDT SPST-Latch 10 kV High Voltage Reed Relays Vacuum Relays P/N Series Carry Current S05LTA S05LTB K81A K81B K81C K43A K43B K43C K43R K43P 5 amps 5 amps 10 amps 10 amps 10 amps 25 amps 25 amps 25 amps 24 amps 24 amps Power Switching* RF Ratings Contact Form Yes Yes Special Special Special Special Special Special Carry Only Carry Only No No No No No Yes Yes Yes Yes Yes SPST-NO SPST-NC SPST-NO SPST-NC SPDT SPST-NO SPST-NC SPDT SPDT-Latch SPST-Latch 12 kV H-14 H-16 Carry Current 30 amps 30 amps Power Switching* RF Ratings Contact Form Carry Only Carry Only Yes Yes DPDT DPDT High Voltage Reed Relays Vacuum Relays Gas Filled Relays Carry Current S05MTA KC-15 KC-16 KC-14 KC-18 H-8 KC-12 H-26 KC-8 KC-2 KC-11 5 amps 12 amps 12 amps 15 amps 15 amps 15 amps 30 amps 30 amps 30 amps 50 amps 50 amps 30 amps Power Switching* RF Ratings Contact Form Special Yes DPDT 25 kV Vacuum Relays Gas Filled Relays P/N Series KC-38 K62A K62B K62C H-17 KC-28 KC-32 KC-30 KC-22 KC-20 Carry Current 15 amps 18 amps 18 amps 18 amps 30 amps 30 amps 45 amps 55 amps 65 amps 110 amps Power Switching* RF Ratings Contact Form Make Only Special Special Special Special Make Only Special Carry Only Special Carry Only No No No No Yes No No Yes No Yes SPST-NC SPST-NO SPST-NC SPDT SPDT SPST-NO SPST-NC SPST-NC SPST-NO SPST-NO 30 kV Vacuum Relays P/N Series H-23 H-24 Carry Current 30 amps 30 amps Power Switching* RF Ratings Contact Form Carry Only Carry Only Yes Yes SPST-NC SPST-NO P/N Series K61A K61B K61C K60C Carry Current 10 amps 10 amps 10 amps 10 amps Power Switching* RF Ratings Contact Form Make Only Make Only Make Only Make Only No No No No SPST-NO SPST-NC SPDT SPDT 50 kV Vacuum Relays Gas Filled Relays Power Switching* RF Ratings Contact Form Carry Only Make Only Make Only Yes Yes Yes Yes Carry Only Yes Carry Only Carry Only No No No No No No Yes Yes Yes Yes Yes SPST-NO SPDT SPDT SPDT SPDT SPDT SPDT 4PDT SPDT SPDT SPDT * Consult Factory for Power Switching Level Dimensions are shown for reference purposes only. Carry Current Gas Filled Relays 15 kV P/N Series H-19 35 kV Vacuum Relays P/N Series P/N Series Dimensions are in inches over (millimeters) unless otherwise specified. P/N Series K64C H-25 Carry Current 10 amps 30 amps Power Switching* RF Ratings Contact Form Make Only Special No No SPDT SPDT 70 kV Gas Filled Relays P/N Series K70A K70B K70C Carry Current 10 amps 10 amps 10 amps Specifications and availability subject to change. Power Switching* RF Ratings Contact Form Make Only Make Only Make Only No No No SPST-NO SPST-NC SPDT www.tycoelectronics.com Technical support: Refer to inside back cover. 1411 Catalog 1308242 Issued 3-03 KILOVAC Protective Relays We offer a broad range of protective relays for use in portable generators, automatic transfer switches, irrigation pumps, industrial facilities, utilities, refineries, oil field, urban rapid transit systems, aircraft, ships and submarines. Some models are qualified by the military for use in ground support equipment, aircraft and Navy ships' high shock applications. These are managed in the DOD supply system under NSN classes 5945 and 6110. KILOVAC protective relays were previously marketed under the WILMAR brand. Following is a just a partial listing of our protective relay offering: Voltage Sensitive WUV/WOV Series ........................Undervoltage & Overvoltage WUVT/WOVT Series ....................Undervoltage & Overvoltage with Time Delay WUV/WOV DC Series ................Undervoltage & Overvoltage DC WOUV DC Series ........................Over/Undervoltage DC WOUVT Series ............................Over/Undervoltage, Time Delay 250 Series ....................................Over/Undervoltage D100X Series................................Close Differential, 1 Phase D101X Series................................Series Close Differential, 3 Phase WD2759 Series ............................AC Over/Undervoltage Sensing Relay, DIN Rail Mounting Reverse Power 700 Series ....................................1 & 3 Phase 700 Series ....................................1 & 3 Phase, Adjustable Time Delay WD32 Series ................................Reverse Power Relay, DIN Rail Mounting Phase Failure 1000 Series ..................................Loss of Phase, Undervoltage Phase Sequence 900 Series ....................................Phase Sequence WD47 Series ................................ Phase Sequence Relay, DIN Rail Mounting Current Balance WCB Series ................................Current Balance Current Sensitive WC1 & WCT1 Series ..................Overcurrent, Time Delay, 1 Phase WC3 & WCT3 Series ..................Overcurrent, Time Delay, 3 Phase WD5051-3 Series ........................AC Over Current Sensing Relay, DIN Rail Mounting Current Differential WCD Series ..................................Current Differential Paralleling 1800 Series ..................................Paralleling (volt) WSYN Series ..............................Voltage Frequency, Phase Angle WD25 Series ................................Paralleling Relay, DIN Rail Mounting Frequency Sensitive WOF & WUF Series ....................Overfrequency & Underfrequency WOUF Series ..............................Over/Underfrequency, Time Delay Option 25-000 Series ..............................Over/Underfrequency 20-000 Series ..............................Frequency, 56-66 Hz 20-050-19 Series ..........................Voltage/Frequency WD81OU Series ..........................Over/Under Frequency Relay, DIN Rail Mounting Ground Fault WGD Series..................................Power Factor & Ground Fault Detector WC1G Series ................................Power Factor & Ground Fault Detector NOTE WD.. Series protective relays are described in section 13 of this databook. For details on other models, please visit our website at www.tycoelectronics.com. Dimensions are shown for 1412 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2250 Brasil - Sao Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada - Markham Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-240-9396 Fax: +57-1-660-0206 Mexico - Mexico City Phone: +52-55-5-729-0425 Fax: +52-55-5-398-1430 For Latin/South American Countries not shown Phone: +57-1-240-9396 Fax: +57-1-660-0206 United States - Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Asia/ Pacific Australia - Sydney Phone: +61-2-9840-8200 Fax: +61-2-9899-5649 Product Information Center: (Technical Support) Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 India - Bangalore Phone: +91-80-841-0200 Fax: +91-80-841-0210 Indonesia - Jakarta Phone: +6221-526-7852 Fax: +6221-526-7856 Japan - Kawasaki, Kanagawa Phone: +81-44-844-8079 Fax: +81-44-844-8733 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Raychem Products Phone: +81-44-900-5102 Fax: +81-44-5025-5027 Korea - Seoul Phone: +82-2-3274-0535 Fax: +82-2-3274-0524/0531 Malaysia - Selangor Phone: +60-3-7053055 Fax: +60-3-7053066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines - Makati City Phone: +632-867-8641 Fax: +632-867-8661 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: Fax: +86-21-6485-0602 +86-21-6485-0728 Shunde Phone: Fax: +86-765-775-1368 +86-765-775-2823 Singapore - Singapore Phone: +65-4820-311 Fax: +65-4821-012 Raychem Products Phone: +65-4866-151 Fax: +65-6545-514 Taiwan - Taipei Phone: +886-2-2664-9977 Fax: +886-2-2664-9900 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Vietnam - Ho Chi Minh City Phone: +84-8-8232-546/7 Fax: +84-8-8221-443 Europe/ Middle East/Africa Austria - Vienna Phone: +43-190-560-0 Fax: +43-190-560-1333 Belgium - Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-352 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Germany - Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Czech Republic - Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Germany - Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Denmark - Viby J Phone: +45-70-15-52-00 Fax: +45-86-29-51-33 Germany HTS Division - Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Egypt - Cairo Phone: +20-2-417-76-47 Fax: +20-2-419-23-34 Estonia - Tallinn Phone: +372-65-05-474 Fax: +372-65-05-470 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France - Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 France Tyco Electronics Export - St Ouen L'Aumone Phone: +33-1-3440-7200 Fax: +33-1-3440-7220 or +33-1-3440-7230 1308242-35M-GIC-CAD-3-03 Printed in the U.S.A. Great Britain - Stanmore Middlesex Phone: +44-181-954-2356 Fax: +44-181-954-6234 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-141 810 8967...69 Fax: +44-141 810 8971 Great Britain - Dorcan, Swindon Raychem Products Phone: +44-1793-528171 Fax: +44-1793-572516 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Lithuania - Vilnius Phone: +370-5-21-31-402 Fax: +370-5-21-31-403 Netherlands - 's-Hertogenbosch Phone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway - Nesbru Phone: +47-66-77-88-99 Fax: +47-66-77-88-55 Poland - Warsaw Phone: +48-22-5490-888 Fax: +48-22-5490-880 Romania - Bucharest Phone: +40-1-311-3479+3596 Fax: +40-1-312-0574 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey - Istanbul Phone: +90-212-281-8181...3 +90-212-282-5130/5430 Fax: +90-212-281-8184 Ukraine - Kiev Phone: +38-044-238-6908 Fax: +38-044-568-5740 Russia - Moscow Phone: +7-095-926-55-06...09 Fax: +7-095-926-55-05 Russia - St. Petersburg Phone: +7-812-325-30-83 Fax: +7-812-325-32-88 Greece - Athens Phone: +30-1-9370-396/397 Fax: +30-1-9370-655 Scotland - Dundee Madison Cable Products Phone: +44-1382-508080 Fax: +44-1382-505060 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Slovakia - Banska Bystrica Phone: +421-48-415-20-11/12 Fax: +421-48-415-20-13 Ireland - Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 Israel - Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 South Africa - Port Elizabeth Phone: +27-41-405-4500 Fax: +27-41-486-1314 Tyco Electronics Corporation www.tycoelectronics.com Relays, Contactors, Timers, Transformers and Circuit Breakers For General Purpose Applications TYCO ELECTRONICS CORPORATION WWW.TYCOELECTRONICS.COM Catalog 1308242 Revised 3-03 AGASTAT AXICOM KILOVAC OEG P&B PRODUCTS UNLIMITED SCHRACK Catalog 1308242 Revised 3-03 Relays, Contactors, Timers, Transformers and Circuit Breakers For General Purpose Applications