WHEN IT COMES TO STATIC PROTECTION,
WE HAVE YOU COVERED.
Static electricity, a natural phenomenon, is the primary cause of a myriad of problems
affecting industry, business and personal life. These problems can be as simple as the
shock from walking across a carpet; as costly as the destruction of sensitive electronic
components or jamming of machinery and as dangerous as the ignition of combustible
vapors, powders, or dust.
Although there are many methods of dealing with static, most of them have serious
shortcomings, such as limited effectiveness, high cost or short life. ACL Staticide Inc., an
ISO 9001:2000 certified company, provides a cost effective and timely solution for static
related problems. ACL manufactures and markets static control products in addition to
computer cleaning products that can be used in a broad range of industries including
numerous office applications.
The fact is, ACL pioneered the formulation of the first topical anti-static solution:
Staticide. Staticide remains the most effective and widely accepted anti-stat solution on
the market today. Through the years, ACL has developed more innovative products to
help eliminate static problems. Use any or all of these products to insure static control
and safety in today’s changing environments.
3
Table of Contents
Staticide Topical Anti-Stat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 4
Staticide Clean Room
Anti-Static Wipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 5
ACL Dualmat Static Dissipative Work Surface . . . . . . . . . . . . . . . . . . . . .page 6
ACL Mat & Table Top Cleaner and Wipes
Hand Care Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 7
Staticide Static Dissipative Floor Finish Systems
Staticide Restorer Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 8 – 9
Staticide Floor Preparation Products . . . . . . . . . . . . . . . . . . . . . . . . . . .page 10
Staticide ESD Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 11
ACL Static Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 12 – 15
Staticide Cleaning Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16 – 17
Staticide Anti-Static Trash Can/Liners . . . . . . . . . . . . . . . . . . . . . . . . . .page 18
96190PRIP BODY 8/10/06 8:06 AM Page 3
4
STATICIDE®TOPICAL ANTI STATS
PROVEN EFFECTIVE IN INDUSTRIAL, COMMERCIAL & INSTITUTIONAL FACILITIES
Staticide, an inexpensive, easy-to-use topical anti static solution, is a highly effective method for long-
term static control. Our family of solutions are widely used in a broad range if industries, as well as in the office
environment. Available in customized formulations to meet specific customer’s needs, Staticide is easily applied on
sensitive electronic equipment, walls, ceilings, floors, carpets, fixtures, work surfaces, tools and equipment, conveyor
belts, clothing and other materials.
3000 – STATICIDE CONCENTRATE
CLOSEST THING YET TO “STATIC CONTROL INSURANCE.”
Staticide is the key ingredient in many ACL anti static solutions. Diluted and mixed with water or various
solvents*, it eliminates a host of static control problems – especially in the electronics, medical, textile and plastics
industries. Staticide Concentrate is available to save freight, handling and storage costs while offering greater flexibility
in dilution.
Staticide Concentrate can be mixed in the following concentrate to solvent*ratios to obtain these Staticide formulations:
• Heavy Duty Staticide – 1 to 39 (1 part Staticide to 39 parts solvent)
• General Purpose Staticide – 1 to 99 (1 part Staticide to 99 parts solvent)
Available in your choice of:
*
Product #3000Q - quart bottle
Product #3000G - gallon bottle
Product # 3000D - 50 gallon drum
Product #3000 MC-Staticide is available for film processing applications.
READY-TO-USE DILUTIONS
STATICIDE FAMILY FEATURES:
• Can be applied by spraying, wiping, dipping or by transfer roller coating, gravure coating or flexographic printing
• Meets MIL-B-81705 and NFPA-56A electrostatic decay criteria when tested in accordance with Federal Test Standard 101B,
Method 4046
• Proven effective in relative humidity below 15%
• Non-staining, completely biodegradable and safe to use
HEAVY DUTY STATICIDE FOR POROUS SURFACES
IDEAL FOR ELIMINATING STATIC PROBLEMS SUCH AS:
• Static electricity discharge on carpeting and fabrics
• Jamming or slipping of materials during printing, packaging or converting
• Ignition of combustible vapors, dust or solvents, causing fire or explosion
One gallon covers approximately 2000 to 2500 square feet and will last from weeks to months,
depending on the application.
Available in your choice of:
Product #2005 – quart bottle/12 quarts per case
Product #2002 – gallon bottle/4 gallons per case
Product #2002-5 – 5 gallon pail
Product # 2002-2 – 50 gallon drum
GENERAL PURPOSE STATICIDE FOR NON-POROUS SURFACES
SOLVES STATIC PROBLEMS SUCH AS:
• The attraction of dirt, dust and bacteria to all environmental surfaces, plastic products and product packaging
• Charge generation on surfaces of tote boxes and carriers used to process and store electronic components
• Damage or destruction of sensitive electronic equipment, components and sub-assemblies during their manufacture,
shipping or receiving
• Data processing “glitches”…memory loss, data errors, paper jams
One gallon covers approximately 2000 to 2500 square feet depending on the application.
Available in your choice of:
Product #2003 – quart bottle/12 quarts per case
Product #2001 – gallon bottle/4 gallons per case
Product #2001-5 – 5 gallon pail
Product # 2001-2 – 50 gallon drum
Staticide Concentrate can be diluted with...
Tap water Benzene Dioxane
Deionized water Freon Carbon Tetrachloride
Isopropyl Alcohol Acetone Perchloroethylene
3000
2005/2002
2003/2001
#1IN STATIC
CONTROL
PERFORMANCE
96190PRIP BODY 8/10/06 8:09 AM Page 4
5
STATICIDE TOPICAL ANTI-STAT FOR CLEANROOMS
5001 – STATICIDE CLEANROOM
SPECIALLY FORMULATED SOLUTION TO CONTROL ELECTROSTATIC DISCHARGE IN CLEANROOMS.
Staticide CleanRoom is a long-lasting and economical formula that is sodium and
chloride free while eliminating static electricity on floors, chairs, CRT screens, work
surfaces, glass, plastics and other electronically problematic materials.
• Filtered to less than 0.5 microns
• Bacteriostatic
• Non-toxic and non-corrosive
• No powdering/out-gasing
• Sodium and chloride free
• Suitable for industrial clean rooms class 100 and above
• Bottle is non-outgassing and anti-static
• Ink will not chip or flake
5001
SW-12
IW-50
SW-12 – STATICIDE WIPES & TOWELETTES
KEEP EQUIPMENT CLEAN & STATIC FREE!
• Ideal for use on hard surfaces such as plastic, non-painted metal and glass
• Long-lasting, non toxic and biodegradeable
• Helps prevent dust buildup
• One-step cleaning & static control
• Safe for all electronic equipment
• Helps prevent system interruptions and static discharge shocks
• Bacteriostatic
24 individually foil wrapped wipes per box / 12 boxes per case / 5” X 8”
IW-50 – INDUSTRIAL SIZE WIPES
FOR LARGER CLEANING APPLICATIONS!
Identical solution as SW-12, but this wipe is better suited for larger cleaning and static
control applications. Ideal for use in industrial, electronic, automotive, plastics and
technical environments.
50 individually foil wrapped wipes per dispenser/6 dispensers per case / 8” X 11”
SWC 80 – ANTI-STATIC STATICIDE CANISTER WIPES
ANTI-STATIC WIPES IN A BULK PACKAGE!
Ideal for use on keyboards and plastic surfaces. Protects sensitive equipment from costly
static problems. For use on all materials that are not adversely affected by water or
alcohol. Prevents dust attraction and is easy to use.
135 wipes per canister / 6 canisters per case / 6” X 6”
ANTI-STATIC WIPES
SWC 80
96190PRIP BODY 8/10/06 8:11 AM Page 5
6
STATIC DISSIPATIVE WORK SURFACE MATERIAL
DUALMAT™
ROHS COMPLIANT: PERFECT FOR LEAD FREE ENVIRONMENTS!
Dualmat is a heavy duty ESD safe material for tables and workbenches that suits environments where static control and contamination
are concerns. This two-ply industrial-grade elastomer is chemically crossed linked to conform to strict ESD and lead-free requirements. It
is permanently dissipative and will not lose its electrical properties. It is as durable as rigid laminates and as comfortable and appealing
as softer rubber or vinyl mats.
• Reversible laminate has two different electrical resistances (Back side is conductive,
colored side is dissipative). Black side of mat can be used for fiber optics. Colored
side is ideal for electronic manufacturing
• Meets industry standards for electrical and environmental: ESDA and RoHS compliant.
• Rapid and safe drain allows static to decay in .05 seconds
• Low out gassing and VOC makes it ideal for cleanrooms and other controlled areas.
• .080 inch (2mm) thickness will lay flat and will not curl
• Durable surface can withstand soldering iron contact and will not buckle from the
heat of equipment
• Embossed surface leaves no glare and adds gripping power so parts don’t slip
• Color is UV protected so they will not fade
• Clean with 6001 Mat & Tabletop Cleaner
ELECTRICAL PROPERTIES @12% RELATIVE HUMIDITY FOR COLORED SURFACE:
Resistance between two points (RTT): 2.1 x 107ohms @10 volts per ANSI/ESDA S4.1
1.3 x 107ohms @100 volts per ANSI/ESDA S4.1
Resistance between point to ground (RTG): 6.1 x 107ohms @10 volts per ANSI/ESDA S4.1
5.3 x 107ohms @100 volts per ANSI/ESDA S4.1
Volume Resistivity: 4.6 x 107ohms - cm
Rolls: Light Blue Royal Blue Dark Gray Green
24” x 40’ 8085BR2440 8285RBR2440 8385DGYR2440 8185GR2440
30” x 40’ 8085BR3040 8285RBR3040 8385DGYR3040 8185GR3040
Mats: Light Blue Royal Blue Dark Gray Green
24” x 36” 8085BM2436 8285RBM2436 8385DGYM2436 8185GM2436
24” x 48” 8085BM2448 8285RBM2448 8385DGYM2448 8185GM2448
24” x 60” 8085BM2460 8285RBM2460 8385DGYM2460 8185GM2460
30” x 60” 8085BM3060 8285RBM3060 8385DGYM3060 8185GM3060
24” x 72” 8085BM2472 8285RBM2472 8385DGYM2472 8185GM2472
30” x 72” 8085BM3072 8285RBM3072 8385DGYM3072 8185GM3072
Available in your choice of: Royal Blue, Light Blue, Dark Gray and Green
• Available in precut mats in varying widths and 40’ rolls.
• Custom sizes available
• Precut green mats are screened with the phrase: Lead Free Work Environment.
• Precut mats have two 10mm snaps installed
• Grounding hardware is separate
96190PRIP BODY 8/10/06 8:11 AM Page 6
7
ACL MAT & TABLE TOP CLEANER & WIPES
6001 – MAT & TABLE TOP CLEANER
TRULY AN IDEAL CLEANER THAT CAN BE APPLIED ON JUST ABOUT ANY SURFACE!
This non-abrasive cleaner is ideal for general use on work stations, table tops and anti static mats.
Leaves no film, is non-streaking and non-flammable. It effectively removes flux residues, oily finger
marks, grease, nicotine, dirt, grime and inorganic contaminants without degreasing the surface’s
anti-static properties.
• Removes surface dirt on table tops, chair mats or anti-static mats
• Eliminates unsightly film or other residue that may build up on static-sensitive areas
• Maintains original surface resistivity of anti-static mats and workbenches
• Contains no alkali or ammonia
• Designed for cleaning any production area in assembling, testing or handling sensitive
electronic components
Available in your choice of:
Product #6001 – quart bottle/12 quarts per case
Product #6002 – gallon bottle/4 gallons per case
MTT20 – MAT & TABLE TOP CLEANER WIPES
THE PERFORMANCE OF 6001 MAT & TABLE TOP CLEANER IN THE CONVENIENCE OF A WIPE!
Using the formula of our 6001 Mat & Tabletop Cleaner, each Mat & Table Top Cleaner Wipe is an
anti-static, non-abrasive wipe for general use on work stations, table tops and anti-static mats.
• Convenient and easy to use
• 20 wipes per canister
6001
MTT20
7001
7608/7602
NEW!
7001 – STATICIDE HI TECH HAND LOTION
ESD SAFE! USE WITH WRIST STRAPS.
Replenish the vital moisture on skin that is important to wrist strap performance. This static
dissipative hand lotion is equipped to prevent and handle static discharge, especially in the
electronics industry. Hi Tech Hand Lotion helps keep the skin moistened without risk of
contamination. Hi Tech Hand Lotion also complies with DOD 1686A and DOD HDBK 263.
Available in:
Product #7001 – 8oz bottle/24 bottles per case
Product #7002 – gallon bottle/4 gallons per case
7602 – HAND SAN PLUS
DON’T JUST PROTECT YOUR HANDS, SHIELD THEM!
Hand-San Plus is a new unique skin protectant that shields and protects your hands. When
applied, this non-toxic and biodegradable liquid creates a natural, non-slippery barrier against
germs, grease, resin, and more. It does not contain silicone so it will not contaminate. Its
protective qualities eliminate the need for gloves in a wide variety of environments such as
electronics, automotive, health and safety and anywhere where hands need to be defended.
Available in:
Product #7602 – 2oz bottle / 12 per case
Product #7608 – 8oz bottle / 24 bottles per case
HAND CARE PRODUCTS
96190PRIP BODY 8/10/06 8:13 AM Page 7
8
STATICIDE STATIC DISSIPATIVE FLOOR FINISH SYSTEMS
ACL’s family of ESD Floor Finishes has a solution to your company's individual flooring needs. Each finish meets ESDA/ANSI 20.20 standard for
static control and has a static decay time of less than 2 seconds when tested per EIA 541. All finishes are non-toxic, biodegradable, have low
V.O.C. and are RoHS compliant. Our finishes do not require buffing and provide superior performance when compared to other brands.
4600 – STATICIDE ULTRA
HIGH QUALITY, HIGH PERFORMANCE, DECREASES STRIPPING CYCLES!
No other ESD floor finish can match Staticide Ultra for electrical properties, physical
longevity and gloss! Staticide Ultra utilizes the latest technology in static dissipative
polymers that act on a molecular level. This enhances its static control ability,
effectiveness, and maximizes the stripping cycles.
• Long life saves money
• Provides superior abrasion performance
• Has an extended stripping cycle that can last for up to 24 months
• Is easily maintained and repaired with no buffing
• Dries faster and with higher gloss intensity than other ESD finishes
• UL listed for slip resistance
Coverage: 1500-2000 sq. ft. per gallon (approx)
Surface Resistivity: 108– 109ohms / square average
Substrate: vinyl, linoleum and ceramic tile
Strip Cycle: 12 – 24 months
Solids: 20% ± 5%
4600-1 (1 gallon bottle)
4600-5 (5 gallon pail)
4600-2 (54 gallon drum)
4000 – STATICIDE ACRYLIC
LOW COST + HIGH PERFORMANCE = VALUE
Staticide Acrylic is a high-solids, low cost method of
protecting your sensitive manufacturing areas from the
dangers of static build-up. Easy to apply; perfect for
production areas, warehousing, shipping, laboratories
and electronic repair facilities.
• Competitively priced
• Easily maintained and repaired with no buffing
• Contains low volatile organic compounds (V.O.C.s)
• UL listed for slip resistance
Coverage: 1500-2000 sq. ft. per gallon (approx)
Surface Resistivity: 108– 109ohms / square average
Substrate: vinyl, linoleum and ceramic tile
Strip Cycle: 6 - 12 months
Solids: 20% ± 5%
40001 (1 gallon bottle)
40005 (5 gallon pail)
40002 (54 gallon drum)
4600
4000
4200 – STATICIDE ZERO V.O.C.
SPECIALLY FORMULATED FOR ENVIRONMENTALLY SENSITIVE AREAS!
Beautify and control static without contaminating the air! Staticide Zero
V.O.C. is zinc free and emits no harmful vapors during application. This
is an ideal ESD floor finish for environments where contamination must
be minimized.
• No buffing required
• No volatile organic compounds (V.O.C.s)
• No zinc
Coverage: 1500-2000 sq. ft. per gallon (approx)
Substrate: vinyl, linoleum and ceramic tile
Surface Resistivity: 108– 109ohms / square average
Strip Cycle: 6 - 12 months
Solids: 20% ± 5%
4200-1 (1 gallon bottle)
4200-5 (5 gallon pail)
4200-2 (54 gallon drum)
4200
96190PRIP BODY 8/10/06 8:14 AM Page 8
9
STATICIDE STATIC DISSIPATIVE FLOOR FINISH SYSTEMS
4100 – STATICIDE RESTORER CLEANER
RESTORES GLOSS, EXTENDS STRIPPING CYCLES!
You invest substantial time and labor to strip and refinish your floors. Now let Staticide Restorer
renew the gloss and prolong the time before you have to start the process over again. A special
conductive ingredient in the formula will help clean the floor but also break down electrical
discharge, lower resistivity, and return your floors to safe specifications.
• Removes black heel marks
• No harmful chemicals like ammonia, phosphates or alkali.
• Non Abrasive
• Low odor
• Biodegradable
Coverage: 1000-1500 sq. ft. per gallon (approx)
Use: For heavy duty cleaning of ACL static dissipative floor finishes and dissipative tile
Surface Resistivity: 107– 109ohms / square average @ 100 volts
Dilution ratio: 1:10 (1 part cleaner to 10 parts water)
Solids: 25%
4100-1 (1 gallon bottle)
4100-5 (5 gallon pail)
4100-2 (54 gallon drum)
4100
STATICIDE RESTORER CLEANER
4800 – STATICIDE ULTRA II
SPECIALLY FORMULATED FOR UNIQUE INDUSTRIAL SURFACES
Advanced acrylic polymer allows superior adhesion and static control for out-of-warranty ESD
floors and other special surfaces. Does not yellow or flake and is tough to scuff. This long life
floor finish will revitalize the shine and electrical properties of old ESD Tile.
• Long life
• Will adhere to ESD Tile
• Enhanced abrasion performance
• Easily maintained and repaired with no buffing
Coverage: 1500-2000 sq. ft. per gallon (approx)
Substrate: concrete, epoxy, ESD epoxy and dissipative tile
Surface Resistivity: 108– 109ohms / square average
Strip Cycle: 12 - 18 months
Solids: 21% ± 5%
4800-1 (1 gallon bottle)
4800-5 (5 gallon pail)
4800-2(54 gallon drum)
4800
96190PRIP BODY 8/10/06 8:15 AM Page 9
10
4010 – STATICIDE ANTI-STATIC FLOOR STRIPPER
Removes multiple coats of wax and synthetic floor finishes. Will not damage or dull flooring when used according
to manufacturer’s recommendations. Non-ammoniated, biodegradable, no harsh odors, non-streaking and low
foaming. Effective in hard or soft water. Staticide Anti-Static Floor Stripper removes embedded dirt providing a
completely clean and finish-ready surface by emulsifying dirt and residual particles of old wax or coating.
• No ammonia or phosphates
• Low VOC formula
• Zero tribogeneration
• Non-Toxic
• Biodegradable
Coverage: 5000 sq. ft. per gallon (approx)
Dilution ratio: 1: 4 (1 part stripper to 4 parts water)
4010-1 (1 gallon bottle)
4010-5 (5 gallon pail)
4010-2 (54 gallon drum)
STATICIDE FLOOR PREPARATION PRODUCTS
4010
ACL 10R – PRIMER
USE IN PREPARATION OF STATICIDE DIAMOND PAINT
ACL 10R Primer is a clear, penetrating, ready-to-use non-toxic primer that provides long-lasting protection against
damage associated with water penetration for a variety of horizontal and vertical surfaces, especially concrete. Should be
used with non-sealed concrete floors only.
• Outstanding water repellency
• Non-yellowing, will assure color stability
• Resists dirt, acid rain and other air pollutants
• Environmentally safe and 100% vapor permeable
• Is easy to apply and clean
ACL 10R-1 (1 gallon bottle)
ACL 10R-5 (5 gallon pail)
ACL 10R-2 (54 gallon drum)
4020 –STATICIDE NEUTRAL CLEANER
KEEP ESD PAINTED FLOORS CLEAN!
A highly concentrated anti-static cleaner for use in all facilities. Leaves no film, low foam level,
constant detergency, non-streaking, safe for septic and sewage systems. Contains no phosphates
or alkalis and will not degrade production environment anti-static properties. This non-abrasive
cleaner is perfect product to use to clean ESD paint.
• Non Abrasive
• No Containments
• Neutral pH
• Neutral charge
• Use on Concrete, ESD Tile and Painted Floors
*Dilution ratio- 1:128 (1 part cleaner to 128 parts water)
Coverage: 10,000 sq. ft. per diluted gallon (approx)
4020-1 (1 gallon bottle)
4020-5 (5 gallon pail)
4020-2 (54 gallon drum)
4020
96190PRIP BODY 8/10/06 8:16 AM Page 10
11
STATICIDE ESD COATINGS
448-7-250 – STATIC DISSIPATIVE PERMANENT COATING
STOP STATIC PERMANENTLY!
This colorless paint can be applied to a variety of plastic surfaces to guard against
static electricity. The unique formula allows static to dissipate across a surface
even down to zero humidity. Safe to use in a variety of environments including
clean rooms.
• Can be applied via roll coat, foam brush, or spray
• Can be applied to workstations, test equipment, computers and keyboards
• Instant permanent static protection (107– 109) even down to zero humidity
• Meets Federal Standard 209E and ISO standard 14644-1 for zero particulation in clean rooms
However, product should be applied outside of clean room
• < 4% VOC
• Colorless
• meets the ESD Association’s S11.11 test standards for electrostatic dissipation
Coverage: Approximately 425 sq. ft. per quart @ .10 (1 mil wet)
Substrate: Most plastics, glass, metals, wood, paper, laminates and many other surfaces
Surface Resistivity: 107– 109ohms / square average
448-7-250ACLQ (1 quart bottle))
448-7-250ACL (1 gallon bottle)
448-7-250
4700 SS – STATICIDE DIAMOND POLYURETHANE
STATIC DISSIPATIVE FLOOR COATING (ESD PAINT)
This high performance water based polyurethane coating dissipates static
discharge on concrete and other unfinished hard floor surfaces. Test patch
recommended.
• Outperforms leading ESD paints
• Provides 100% static control, even at low levels of humidity.
• Withstands alcohol, oils gasoline and most common electronic chemicals
• Formulated with low V.O.C.s – less than 1.04 lbs/gallon (125 g/liter)
• Resists yellowing, color fading and is biodegradable
• Stocked in standard dark gray color only, available in custom colors (call for pricing)
Coverage: 250-300 sq. ft. per gallon (approx.)
Substrate: concrete
Surface Resistivity: 105– 108ohms / square average
4700-SS1 (1 gallon bottle)
4700-SS5 (5 gallon pail)
4700 SS
NEW!
96190PRIP BODY 8/10/06 8:17 AM Page 11
12
ACL STATIC DETECTION METERS
All meters are warranted one year from date of purchase on parts and labor • Calibration is recommended every 12 months.
Please contact ACL Inc. for complete specifications on individual meters.
ACL 300B – PRECISION ELECTROSTATIC LOCATOR METER
MEASURES STATIC CHARGES INSTANTLY FROM 0 – 30,000 VOLTS, RELIABLY AND
ECONOMICALLY IN A POCKET SIZE METER!
• Most widely used electrostatic locator
• Designed for close and repetitive readings
• Uses standard 9 volt battery with battery test feature
• Low drift, Repeatability ± 1%
• Unique “Quick Zero” function which instantly re-zeroes the instrument and provides ground
compensation for the user
Weight: 5.5 ounces
Size: 4 3/8" x 2 2/8" x 1 5/16”
Accuracy: ± 10%
ACL 350 – DIGITAL STATIC LOCATOR
• Non-contact meter that indicates electrostatic field voltage and polarity on charged surfaces
• Equipped with a Power On/Hold button and zero button
• Automatic shut off after 90 seconds
• Easy to read 3 -1/2 digit LCD display automatically updates three times per second
• Can measure voltages in many applications (packaging materials, production aids and raw materials)
• Range 0 – 80,000 volts
Weight: 5 ounces
Size: 4.2" x 2.4" x .9”
Accuracy: ± 10%
ACL 400 – IONIZED ENVIRONMENT ELECTROSTATIC LOCATOR
Measures static charges instantly from 0 – 30,000 volts in an ionized environment. The wide range
and ease of accurate repetitive measurements make this pocket sized meter ideally suited for ESD
control applications in today’s ionized manufacturing environment.
• Stable operation – records output for continuous monitoring over several hours
• Chopper Stabilized – not affected by ionizers
Weight: 6 ounces
Size: 4 3/8" x 2 5/8" x 1 5/16”
Accuracy: Better than ± 10%
ACL 300B
ACL 350
ACL 400
ACL 600 – STATI-CHECK METER
Detect how much charge a person is carrying and have it discharged instantly. The unit
can be wall mounted outside the ESD protected area to avoid charged persons from
unknowingly entering or it can be used by operators to periodically check themselves
within a protected area. The meter must be grounded to produce an accurate
measurement and to discharge. Touch to test, and watch the liquid crystal display
indicate between 0-19,990 volts of static charge + or – polarity.
Weight: 2 pounds
Size: 14 1/2” x 9” x 3 1/3”
Accuracy: Better than ± 5%
ACL 600
96190PRIP BODY 8/10/06 8:19 AM Page 12
13
ACL STATIC SURFACE RESISTIVITY AND RESISTANCE METERS
ACL 390 – RESISTANCE METER
The ACL 390 meter gives the advantages of an expensive and cumbersome Megohmmeter at
an economical price and a compact convenient size. Measures resistance to ground (RTG) and
surface resistivity with a test range of 103– 1012 ohms. Use the built in electrodes or the optional
weight kit to comply with industry standards. Meter automatically generates a 10v or
100v test voltage with results shown in multi-colored LED display. Includes ground cord and case.
ACL 391 Accessory Kit – External probes will meet industry standards for testing resistance
point to point (RTT) and volume resistance. Includes carrying case (with foam lining) two 5lb
probes, and test leads.
• Measures resistance to ground (RTG)
• Measures resistance point to point (RTT)
• Test range of 103– 1012 ohms
• Automatically generates a 10v or 100v test voltage
• Test results shown in multi-colored LED display
• Size
• +/- Accuracy: 10%
• Includes ground cord and case
•Optional Weight Kit (ACL 391) includes carrying case (with foam lining) two 5lb probes, and test leads
• Testing with ACL 391 weight kit allows compliance to industry standards
ACL 800 – DIGITAL MEGOHMMETER
MEASURES TEMPERATURE, HUMIDITY & RESISTIVITY
The Megohmmeter is an easy to operate, compact lightweight, portable meter designed to
measure temperature, humidity and electrical resistance/resistivity. Using both internal
and external test probes, the meter will measure resistivity, resistance between two points,
and resistance to ground according to ESDA/ANSI Standards, - S4.1, S7.1, S11.11, and
European Standard CECC-EN 1000/15.
• Measures resistivity: 103- 1012 ohms/square
• Measures resistance: 103- 1012 ohms
• Measures relative humidity 10% to 90% RH
• Measures temperature: 32°F to 100°F (0°C – 37.7°C – optional)
• 10v/100v test voltage range
• High accuracy – all ranges
• Rechargeable battery capability
• Tests mats, floor finishes, paints, wrist straps, smocks, foot wear, bags and containers
Weight: 14 pounds
Accuracy: 103- 108Ohms per square = ± 5%
109- 1012 Ohms per square = ± 9%
Size: 15” x 12” x 4”
ACL 800
ACL 390
ACL 385 – SURFACE RESISITIVITY METER
The first “Wide Range” hand held surface resistivity meter. This compact meter measures both surface resistivity
and resistance to ground with a test range from 10 to 10 Ohms per square.
• CE approved
• Simple repeatable measurements of conductive, static dissipative and insulative surfaces by the ASTM standard D-257
method of parallel bar sensing
Weight: 6 ounces
Size: 5” x 3” x 1”
Accuracy: ± 5%
ACL 385
NEW!
96190PRIP BODY 8/10/06 8:20 AM Page 13
14
ACL COMBINATION WRIST STRAP AND HEEL GROUNDER TESTERS
ACL 780 – ECOMONY COMBO TESTER FOR WRIST STRAPS AND HEEL GROUNDERS
GET THE PERFORMANCE OF A STATE OF THE ART TESTER FOR A COST-EFFECTIVE PRICE
Monitor employees before entering a protected area with one simple test. This straightforward pass and fail unit will test wrist straps and heel
grounders simultaneously and consequently eliminate the need for changing feet or flipping
switches. With speed, ease and clarity colored LED show test results. No computer is necessary
for pass / fail testing so you don’t pay for features you don’t need!
• Automatic calibration
• Measures from 100 kilohms to 100 megohms with an option to 1000 megohms
• Conforms to ANSI / ESDA 20.20 standard and European standards
• Adjustable resistivity limits
• NIST certificate included
• AC or DC powered
• LED, low battery and buzzer displays
• Utilizes same footplate and stand as ACL 750 below
Model ACL 780 includes Tester, Footplate, 9 volt battery, & power adapter
Model ACL 781 includes Tester, Footplate, 9 volt battery, power adapter & stand.
ACL 750 – COMBO TESTER FOR WRIST STRAPS AND HEEL GROUNDERS
INCLUDING SOFTWARE
SO SIMPLE, YET SO SOPHISTICATED. SOFTWARE PROVIDES DOCUMENTATION FOR ISO 9000
Easy-to-use meter measures electrical resistance of wrist straps and heel grounders simultaneously and individually. The ACL 750 can do what
pass/fail testers cannot: Give actual resistance readings and store data. When the software is used, test results are stored on a computer which
allows you to monitor and analyze test information and help manage your company’s static control program. Results can be stored from each test
for up to one year in your computer. Create reports to help guide your internal policies and improve your company’s productivity. Reporting will
direct your attention to problem work areas, employees who routinely fail, trends over time, and so much more.
METER FEATURES:
• Test both wrist straps and heel grounders simultaneously and individually at a safe 19 volts
• Accommodates both U.S. standard and dual wire (constant monitor) wrist straps
• Reads actual resistance of wrist straps and heel grounders from 500 kilohms up to 100 meg ohms, with an
option up to 1000 meg ohms. Conforms to US ANSI/ESD S20.20 standard and to European CE standard
• Alarm points may be programmed to any value for any employee or default limits (ESDA recommended limits
can automatically be used)
• Allow employee access by keyboard, mouse, barcode, mag stripe or proximity card
• Allows for new employees to be added easily the first time they use the tester
SPECIFICATIONS:
Power Supply 9 volt battery or 12 volt DC adapter
Test Voltage: 19volts DC ± (open circuit)
Resistance range: Wrist Strap- Low: 500k, 750k
High: 2M, 5M, 10M, 25M, 35M, 50M, 75M,100M
Heel/Toe/Shoe- Low: 500k, 750k ohms
High: 2M, 5M, 10M, 25M, 35M, 75M, 100M
(1000M optional) Internally selectable
Features: Dual path foot plate, toggle switch selector, RS-232 computer interface, NIST/CECC limits, micro-processor controlled.
Made in U.S.A. High accuracy.
Environment: 32° - 100°F: 0% - 85% RH
Display: Red and green LEDs, high dB buzzer, computer monitor (optional)
ACL 780
ACL 750
Shown with ACL 755
Barcode Reader
96190PRIP BODY 8/10/06 8:21 AM Page 14
15
ACL COMBINATION WRIST STRAP AND HEEL GROUNDER TESTERS
ACL 750 – SOFTWARE FEATURES:
• Generates reports for e-mailing and printing: Monthly Test Results, Entire Log,
Daily Log, Employee Failure Exception, ESD Certification Expiration,
Employee Attendance, Employee Vacation
• Automatically generates and e-mails reports to one or more recipients
• Accepts up to 30,000 employees
• Can limit reports to specific workgroups
• Can easily import report files into spreadsheet or data base software
• Can import companies employee list/data from MS Access and Excel
• Can be password protected by supervisor
• Allows for employee information to be password protected
• Can be upgraded to allow electronically locked doors to open or warning alarms to
sound when user wrist straps and heel grounders are in tolerance
• Is able to prevent unauthorized entry without the proper ID card
• Is compatible with Microsoft Win3.1, 95, 98, ME, WinNT, Windows 2000 operating
systems and Windows XP Professional
• Can connect multiple test stations to LAN network
• Accepts and displays international dates and times
• Limits access to employees with expired certification
Model ACL 750 includes tester, footplate, stand, 9 volt battery, power adapter & software
96190PRIP BODY 8/10/06 8:22 AM Page 15
16
STATICIDE CLEANING WIPES
LF-50 – HEAVY DUTY LINT FREE WIPES
EXCELLENT ABSORPTION WITH UNBELIEVABLE STRENGTH!
Ideal for the application of Heavy Duty & General Purpose Staticide as well as 6001 Mat & TableTop Cleaner. These low-lint
polyester material wipes do not contain dyes or binders. Highly absorbent with soft strength, this low particle count wipe
holds liquid without breaking down, eliminating lint contamination.
50 wipes per bag / 12 bags per case / 12” X 13”
CCW 135 – CLEAN & CLEAR WIPES
THE ULTIMATE LENS AND SCREEN WIPE
This pre-moistened wipe is ideal for cleaning most types of glass and plastic lenses. Used on
goggles, cameras, lenses and magnifiers. It will also help fight fog build-up. 135 wipes per canister.
135 wipes per canister / 12 canisters per case / 6” x 7.5”
TWC 135 – DISINFECTING TELEPHONE CLEANING WIPES
EPA REGISTERED
An effective way to clean and disinfect hard non-porous surfaces. Cleans and disinfects telephones,
dictating equipment, earphones and other telecommunications equipment. Available in a pop-up canister.
135 wipes per canister / 12 canisters per case / 6” x 7.5”
TW-12 – STATICIDE TELEPHONE CLEANING WIPES
Antiseptic telephone wipes are perfect for cleaning all non porous surfaces of the
telephone. Bacteriostatic properties instantly sanitize surfaces, helping to prevent
the spread of germs and bacteria. Ideal for home, office or travel.
24 individually foil wrapped wipes per box / 12 boxes per case / 5” X 8”
IR-12 – ACL HAND INK REMOVER WIPES
CLEAN & MOISTURIZE HANDS SIMULTANEOUSLY!
• Removes ink, toner, stains and smudges from hands without soap and water.
• Quick and convenient clean-up
• Contains lanolin so it leaves skin soft and smooth
• No greasy residue
24 individually foil wrapped wipes per box / 12 boxes per case / 5” X 8”
CCW 135
TWC 135
TW-12
IR-12
96190PRIP BODY 8/10/06 8:23 AM Page 16
17
STATICIDE CLEANING & MAINTENANCE PRODUCTS
FOR COMPUTERS & OFFICE EQUIPMENT & INDUSTRIAL APPLICATIONS
ADDITIONAL CLEANING PRODUCTS
by STATICIDE
#8007 – Economy Head Cleaning Kit for 3 1/2” Disk Drive
#8010 – Label Remover Kit
#8012 – Computer Mouse Cleaning Kit
#8015/ #8015-4 PK – Fax Machine Cleaning Sheet
#8016 – Laser Printer Cleaning Kit
#8018 – Keyboard Cleaning Kit
#8022/#8023 – Laser Printer Cleaning Paper
#8025 – Inkjet Cartridge Cleaning Kit
#8042 – Computer Monitor Cleaning Kit
#8046 – Anti-Static Wide Head Swab
#8048 – Anti-Static Narrow Head Swab
#8058 – CD Rom Lens Cleaner
#8062 – CD Scratch Repair Kit
8000 – ANTISTATIC EQUIPMENT CLEANING WIPES
TOUGH ON STAINS & EASILY ACCESSIBLE!
Keep your equipment looking new with pre-moistened lint-free wipes in a handy pop-up dispenser. Easily removes dust,
dirt, grimy oils & ribbon ink from external housings of all metal and plastic equipment. Also ideal for use on work stations,
file cabinets, computer covers, white boards, parts and tools. Do not use on glass or fine woods.
40 wipes per pop-up pouch pack with unique reclosable top / 12 pouch packs per case / 7” X 7”
8020 – PREMOISTENED 5” SWABS
Convenient and easy to use for cleaning keyboard keys, tape heads, electronic parts
and all office and production equipment.
24 individually foil wrapped swabs per bag/12 bags per case
8008 – STATIC NEUTRALIZING LINT FREE CLOTH
PERFECT FOR CLEANING COMPUTER HOUSING AND INDUSTRIAL SURFACES!
A specially treated dry cloth made of a soft, lint-free polyester material that picks
up dust and neutralizes a static charge on all surfaces.
3 individually bagged cloths per pack / 24 packs per case / 11” x 13”
8040 – ANTI-GLARE SCREEN CLEANER
Cleans any glass including anti-glare screens. No abrasives,
perfect for computer screens and TV screens.
With finger tip sprayer / 4 oz bottle / 12 bottles per case
8044 – LINT FREE WIPES
Strong and absorbent, these wipes can be used on any
surface. Ideal applicator for 8040 screen cleaner.
75 wipes per bag / 12 bags per case / 6” x 6”
8066 – NOTEBOOK/LAPTOP SCREEN
CLEANING WIPES
Removes fingerprints, ink marks, nicotine, and other soils safely
from the screen and housing of all Notebook/Laptop computers
and plasma screens.
60 wipes per dispenser / 12 dispensers per case
8072 – ANTI-STATIC FOAM
CLEANER FOR GLASS & PLASTIC
Specially formulated for general external cleaning of
glass and plastic materials. Leaves no film while
keeping equipment clean and static free.
15 oz. can / 12 cans per case
8000
8020
8008 8040
8066
8072
96190PRIP BODY 8/10/06 8:26 AM Page 17
18
STATICIDE ESD WORKSTATION PRODUCTS
5076 – ANTI-STATIC TRASH CAN LINER
Ideal for static sensitive areas where electrostatic contamination is a problem.
• Size: 24” x 34” (50 bags per case)
• Black or pink tinted antistatic polyethylene 1.5 ml
• Surface resistivity: <10 Ohms/sq. ASTM-D-257
• Static decay rate: 5 KV-O Volts < 2 seconds*
* per Mil-B-81705B Type II-Fed. Test Method 101C Method 4046
5075 – STATICIDE ESD STATIC DISSIPPATIVE WASTEBASKET
This static dissipative high-impact, non-black container is a high-density polyethylene that does not
contain carbon, dyes, or additives making it ideal for all applications demanding cleanliness. The trash
barrel will not tribogenerate and will not dissipate static electricity.
The wastebasket is ideal for cleanrooms, manufacturing, inspection, quality control and research
industries.
The container may be used alone or with our new product #5076 Anti-Static Trash Can Liner.
• Size: 16” diameter x 22” high (11 gallons)
• No carbon or dyes
• Linear high density polyethylene
• Will not tribogenerate
• High impact resistance
• Will not outgas
• Convenient for office or laboratory
• Permanently dissipative
• Safe to use in solvent areas
• Cleanroom and environmentally safe
5075
2200 – ANTI-STATIC STARTER KIT
THIS COMPACT KIT CONTAINS A SOLUTION FOR ALL YOUR STATIC PROBLEMS.
Keep this handy near your workstation for easy accessibility for ESD control needs.
CONTENTS:
1 – 4 oz. General Purpose Staticide - for use on non-porous surfaces
1 – 4 oz. Heavy Duty Staticide - for use on porous surfaces such as carpets and fabrics
1 – 2 oz. Mat and Table Top Cleaner - cleans and restores ESD mats and workstations
1 – 1 oz. ESD Hand Lotion - non-acidic improves wrist strap performance
5 – Anti-Static Swabs (large) - conductive handle, for use on sensitive electronics
5 – Anti-Static Swabs (small) - conductive handle, for use on sensitive electronics
1 – Pre-moistened Disposable Cleaning Swab - for use on keyboards and other small areas
6 – Pre-moistened Telephone Cleaning Wipes - cleans and disinfects telephones, earphones
6 – Pre-moistened Ink Remover Wipes - removes ink and grease from hands
6 – Pre-moistened Staticide Anti-static wipes - removes static from CRT screens
5 – Lint Free Wipes - for use with anti-static cleaning solutions
MSDS available on all products from our website or by request.
www.aclstaticide.com • info@aclstaticide.com • 800-782-8420
2200
96190PRIP BODY 8/10/06 8:27 AM Page 18
ISO 9001:2000 CERTIFICATION PROGRAM
ACL Inc. achieved ISO certification (Certificate #A3656) in February of 1995. The stringent
requirements of the International Standards Organization has provided ACL Inc. both an
internal and external means of assessing its quality standards. ACL is continually striving to
be responsive to ever-changing static control problems around the world.
QUALITY POLICY
It is the policy of ACL Staticide to achieve the highest standards of product quality and
customer service. In order to achieve this, the company has implemented a corporate
wide quality system in accordance with ISO 9001:2000. The quality system communicates
expectations, establishes controls and fosters a culture committed to excellence in
everything we do with a focus on continual improvement. Through management
leadership, internal communication, competence, awareness and training, we are
committed to meeting the objectives of the company to achieve the highest
standard of product quality and service.
ACL’S MISSION
ACL’s goal is to be the best supplier of quality products and services in our industry.
We are committed to excellence and product innovation in each market we serve.
Prompt and thorough response to our customers’ needs is ACL’s hallmark.
Quality is every ACL employee’s responsibility.
World Headquarters:
1960 East Devon Avenue
Elk Grove Village, IL 60007 USA
847.981.9212
800.782.8420
fax: 847.981.9278
e-mail: info@aclstaticide.com
http://www.aclstaticide.com
Volume XI
