2012-08-17 Reflective Interrupter Reflexlichtschranke Version 1.0 (not for new design) SFH 9202 Features: Besondere Merkmale: * IR-GaAs-emitter in combination with a silicon NPN phototransistor * Optimal operating distance 1 mm to 5 mm * Daylight cut-off filter * Low saturation voltage * Emitter and detector electrically isolated * Preconditioning acc. to JEDEC Level 4 * Replacement: SFH 9206 * IR-GaAs-Lumineszenzdiode in Kombination mit einem Si-NPN-Fototransistor * Optimaler Arbeitsabstand 1 mm bis 5 mm * Tageslichtsperrfilter * Geringe Sattigungsspannung * Sender und Empfanger galvanisch getrennt * Vorbehandlung nach JEDEC Level 4 * Ersatz: SFH 9206 Applications * * * * Anwendungen Position reporting End position switch Speed monitoring and regulating Motion transmitter * * * * Positionsmelder Endabschaltung Drehzahluberwachung und -regelung Bewegungssensor Ordering Information Bestellinformation Type: Collector-emitter current Ordering Code Typ: Kollektor-Emitterstrom Bestellnummer Kodak neutral white testcard with 90% reflection; IF = 10 mA, VCE = 5 V, d = 1 mm IPCE [A] SFH 9202 63 ... 800 Q65110A2712 SFH 9202-2/3 63 ... 200 Q65110A2705 SFH 9202-3/4 100 ... 320 Q65110A2710 SFH 9202-4/5 160 ... 500 Q65110A2709 SFH 9202-5/6 250 ... 800 Q65110A2711 2012-08-17 1 Version 1.0 (not for new design) SFH 9202 Maximum Ratings (TA = 25 C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Emitter Sender Reverse voltage Sperrspannung VR 5 V Forward current Durchlassstrom IF 50 mA Total power dissipation Verlustleistung Ptot 80 mW Thermal resistance junction - ambient 1) page 14 Warmewiderstand Sperrschicht - Umgebung RthJA 270 K/W Collector-emitter voltage Kollektor-Emitter-Spannung VCE 16 V Collector-emitter voltage Kollektor-Emitter-Spannung (t 1 min) VCE 30 V Emitter-collector voltage Emitter-Kollektor-Spannung VEC 7 V Collector current Kollektorstrom IC 10 mA Total power dissipation Verlustleistung Ptot 100 mW Thermal resistance junction - ambient 1) page 14 Warmewiderstand Sperrschicht - Umgebung RthJA 270 K/W 1) Seite 14 Detector Empfanger 1) Seite 14 Interrupter Lichtschranke Operating and storage temperature range Betriebs- und Lagertemperatur 2012-08-17 Top; Tstg 2 -40 ... 100 C Version 1.0 (not for new design) SFH 9202 Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Ambient temperature range Umgebungstemperatur TA -40 ... 100 Total power dissipation Verlustleistung Ptot 150 Electrostatic discharge Elektrostatische Entladung VESD C mW 2 kV Characteristics (TA = 25 C) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Emitter Sender 950 nm Emission wavelength Zentrale Emissionswellenlange peak Forward voltage Durchlassspannung (IF = 50 mA) VF 1.25 ( 1.65) V Reverse current Sperrstrom (VR = 5 V) IR 0.01 ( 1) A Capacitance Kapazitat (VR = 0 V, f = 1 MHz) C0 25 pF Capacitance Kapazitat (VCE = 0 V, f = 1 MHz, E = 0) CCE 4 pF Dark current Dunkelstrom (VCE = 20 V) ICE0 5 ( 50) nA Photocurrent (outside light density) Fotostrom (Fremdlichtempfindlichkeit) (VCE = 5 V, EV = 1000 lx) IPCE 1 mA Detector Empfanger 2012-08-17 3 Version 1.0 (not for new design) SFH 9202 Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Interrupter Lichtschranke Collector-emitter current Kollektor-Emitterstrom (Kodak neutral white testcard with 90% reflection; IF = 10 mA, VCE = 5 V, d = 1 mm) (min) (max) Collector-emitter saturation voltage Kollektor-Emitter Sattigungsspannung (Kodak neutral white testcard with 90% reflection; IF = 10 mA, IC = 20 A, d = 1 mm) IPCE IPCE VCEsat 63 800 A A 150 (< 600) mV Switching Times Schaltzeiten Turn-on time 2) page 14 Einschaltzeit 2) Seite 14 (VCC = 5 V, IC = 100 A, RL = 1 k) ton 40 s Rise time 2) page 14 Anstiegzeit 2) Seite 14 (VCC = 5 V, IC = 100 A, RL = 1 k) tr 30 s Turn-off time 2) page 14 Ausschaltzeit 2) Seite 14 (VCC = 5 V, IC = 100 A, RL = 1 k) toff 45 s Fall time 2) page 14 Abfallzeit 2) Seite 14 (VCC = 5 V, IC = 100 A, RL = 1 k) tf 40 s 2012-08-17 4 Version 1.0 (not for new design) SFH 9202 Mechanical test setup Mechanischer Testaufbau d Reflector with 90% reflexion (Kodak neutral white test card) OHM02257 Test Circuit for Switching and Response Time Testschaltkreis fur Schalt- und Reaktionszeit F RL C VCC Output OHM02258 2012-08-17 5 Version 1.0 (not for new design) SFH 9202 Permissible Power Dissipation Verlustleistung Ptot = f(T A) Collector Current Kollektorstrom IC / ICmax = f(d), TA = 25C C OHO02255 100 OHL00945 160 mW C max % Total power dissipation Ptot 80 120 Detector 100 60 Emitter 80 40 60 40 20 Kodak neutral white test card 20 Mirror 0 0 0 1 2 3 4 mm 5 d 0 20 40 60 TA Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f(TA) Switching Characteristics Schaltverhalten t = f(RL), T A = 25 C, IF = 10 mA OHO01367 10 3 t IF s 80 C 100 t on t off OHL00986 120 mA 100 80 10 2 60 40 20 10 1 0 10 2012-08-17 0 10 1 k RL 10 2 0 20 40 60 80 C 100 TA 6 Version 1.0 (not for new design) SFH 9202 Dark Current Dunkelstrom ICEO = f(T A), VCE = 20 V, E = 0 Transistor Capacitance Transistor Kapazitat CCE = f(VCE), f = 1 MHz, E = 0, TA = 25C OHF04051 8 pF C CE 7 6 5 4 3 2 1 0 -3 10 10 -2 10 -1 10 0 10 1 V 10 2 VCE Forward Voltage Durchlassspannung VF = f(T) Collector Current Kollektorstrom IC = f(I F), d = 1 mm, 90% reflection, TA = 25C OHO01324 300 C A OHO02256 1.30 VF V 1.25 200 F = 20 mA 10 mA 1.20 5 mA 1.15 100 1.10 VCE = 5 V 1.05 0 2012-08-17 0 4 8 12 1 -40 16 mA 20 F 7 -20 0 20 40 60 C T 100 Version 1.0 (not for new design) SFH 9202 Photocurrent Fotostrom IC = f(VCE), d = 1 mm, 90% reflection, TA = 25C Spectral data of emitter and detector Spektraldaten von Sender und Empfanger Irel, Srel = f(), TA = 25C OHO00786 100 rel S rel % OHO01326 0.6 F = 25 mA C mA 0.5 80 F = 20 mA 0.4 60 F = 15 mA 0.3 Detector 40 F = 10 mA 0.2 20 F = 5 mA 0.1 Emitter 0 700 800 900 0 0.1 1000 nm 1100 10 0 10 1 V VCE Permissible Pulse Handling Capability Zulassige Pulsbelastbarkeit IF = f(tp), TA = 85 C, duty cycle D = parameter Permissible Pulse Handling Capability Zulassige Pulsbelastbarkeit IF = f(tp), TA = 25 C, duty cycle D = parameter IF OHF02623 104 mA t D = TP tP IF IF 0.2 t D = TP T D= 103 OHF02622 104 mA IF T D= 103 0.005 0.01 0.02 0.05 0.1 tP 0.005 0.01 0.02 0.05 0.1 0.2 102 0.5 102 0.5 1 1 101 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 101 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2012-08-17 8 Version 1.0 (not for new design) SFH 9202 Package Outline Mazeichnung 6.2 (0.244) (0.4 (0.016) typ.) 1 2 3 6 5 (0.05 (0.002) typ.) B 2.1 (0.083) 1.7 (0.067) 0...0.1 (0...0.004) 3.8 (0.150) 2.54 (0.100) Raster (spacing) (1.2 (0.047) typ.) 0.5 (0.020) 0.3 (0.012) Sender/Emitter 4.2 (0.165) 1.27 (0.050) Raster (spacing) A (0.1 (0.004) typ.) 5.8 (0.228) 3.4 (0.134) 3.0 (0.118) (5) 0.15 (0.006) 0.13 (0.005) 0.2 M A 4 Chip Positionen 0.1 M B Empfanger/Receiver GPLY0504 Dimensions in mm (inch). / Mae in mm (inch). 2012-08-17 9 Version 1.0 (not for new design) SFH 9202 Pinning Anschlussbelegung Pin Description Anschluss Beschreibung 1 Anode 2 - 3 Emitter 4 Collector 5 - 6 Cathode 2012-08-17 10 Version 1.0 (not for new design) SFH 9202 0.6 (0.024) 1.2 (0.047) 1.27 (0.050) 1.27 (0.050) Recommended Solder Pad Empfohlenes Lotpaddesign Padgeometrie fur verbesserte Warmeableitung Paddesign for improved Heat dissipation 3.9 (0.154) Cu-Flache >5 mm 2 Cu-area >5 mm 2 Lotstopplack Solder resist OHPY0030 JEDEC Level 4 2012-08-17 11 Version 1.0 (not for new design) SFH 9202 JEDEC Level 4 Reflow Soldering Profile Reflow-Lotprofil OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Profile Feature Profil-Charakteristik Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up rate to preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2012-08-17 C 12 s Version 1.0 (not for new design) SFH 9202 Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2012-08-17 13 Version 1.0 (not for new design) SFH 9202 Glossary Glossar 1) Thermal resistance: Mounting on PC-board with > 5 mm 2 pad size 1) Warmewiderstand: Montage auf PC-Board mit > 5 mm 2 Padgroe 2) IC as a function of the forward current of the emitting diode, the degree of reflection and the distance between reflector and component (d) 2) IC eingestellt uber den Durchlassstrom der Sendediode, den Reflexionsgrad und den Abstand des Reflektors vom Bauteil (d) 2012-08-17 14 Version 1.0 (not for new design) SFH 9202 Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2012-08-17 15