JackRapid Termination Tool TM Reduces installation time Introducing the new JackRapid, * Easy-to-use tool seats and cuts all jack termination tool - the industry's * Increases productivity - install jacks most innovative and time-saving termination tool. This patented tool seats and terminates all wires simultaneously, with one squeeze of the ergonomic handle. Get accurate terminations and clean, consistent cuts every time. wires at once 8 times faster Accurate, clean and consistent cuts and terminations * Consistent terminations every time - no more wasted jacks * Built-in bed helps hold jack in place Eliminates user fatigue * Ergonomic handle * Convenient, built-in stripper Future proof * Replaceable blade heads for use with multiple vendor jack types Wall-friendly * Unique design easily accommodates close-to-wall installations Ordering Information Technical Data Item Model Name Description 3093687 JR-LEV-1 JR-LEV-1, JackRapid Termination Tool (for Leviton 41106, 41108, 5G108) 3093756 JR-LEV-1-H JR-LEV-1-H, JackRapid replacement blade head (for Leviton 41106, 41108, 5G108) 3093808 JR-SYS-UNI-1 JR-SYS-UNI-1, JackRapid Termination Tool (for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300) 3093813 JR-SYS-UNI-1-H JR-SYS-UNI-1-H, JackRapid replacement blade head (for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300) 3093693 JR-LEV-2 JR-LEV-2, JackRapid Termination Tool (for Leviton 61110, 5G110, 6110G) 3093763 JR-LEV-2-H JR-LEV-2-H, JackRapid replacement blade head (for Leviton 61110, 5G110, 6110G) 3093700 JR-SYS-2 JR-SYS-2, JackRapid Termination Tool (for Systimax MGS400, MGS500, MFP420, MFP520) 3093824 JR-SYS-2-H JR-SYS-2-H, JackRapid replacement blade head (for Systimax MGS400, MGS500, MFP420, MFP520) 3093721 JR-ORT-2 JR-ORT-2, JackRapid Termination Tool (for Ortronics TJ5E00, TJ600, TJ610) 3093774 JR-ORT-2-H JR-ORT-2-H, JackRapid replacement blade head (for Ortronics TJ5E00, TJ600, TJ610) 3057463 JR-ERGOHANDLE JackRapid Ergonomic Handle See how to terminate jacks 8 times faster Get accurate terminations and clean, consistent cuts every time with the JackRapid Termination Tool. 1. Strip cable jacket with a standard cable stripper or 2. Determine wiring scheme. Dress all 4 pairs (8 wires). first with IDC slots facing blades of JackRapid. the built-in cable stripper. 4. Ensure jack is completely and 3. Insert jack in JackRapid front 5. Pull trigger completely and securely inserted in jack holder remove excess wire prior to bed with IDC slots facing the releasing trigger. 6. Wires will be seated and cut for a solid termination. blades. Distributed by: All-Spec Industries 5228 US Hwy 421 N Wilmington, NC 28401 7. Release handle and remove jack from JackRapid tool. Visually verify proper termination. sales@all-spec.com www.all-spec.com PH: 800-537-0351 FX: 800-379-9903 N E T W O R K S U P E R V I S I O N Fluke Corporation P.O. Box 777, Everett, WA USA 98206-0777 Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details, go to www.flukenetworks.com/contact. (c)2007 Fluke Corporation. All rights reserved. Printed in U.S.A. 11/2007 2447816 D-ENG-N Rev E