Features
Superminiature, heavy power.
Low coil power consumption.
Switching current up to 2×10A.
PC board mounting.
Suitable for household appliance, electrical equipment, automation system, and automobile industry application.
Orderi ng Inform a t i on
4117 C S 10 12VDC 1.0
1 2 3 4 5 6
1 Part number：4117
2 Conta ct arrang ement：A:1A；B:1B；C:1C；U:IU；W:1W
3 Enclosure：S: Sealed type；Z: Dust cover
O: open type
4 Contact Current：10:10A；20:20A
5 Coil rated Voltage(V)：DC:3,5,6,9,12,18,24
6 Coil power consumption：1.0:1.0W；1.2:1.2W
Contact Data
Contac t Arrangement 1ASPSTNO1CSPDT(B-M)1USPSTNODM1WSPDTNC-NO
Contact Material AgSnO2
Contact Rating (resistive) 1A1C: 10A/120VAC,28VDC 20A/14VDC ;
1U: 2×10A/120VAC,28VDC 2×20A/14VDC ;
1W: 2×10A/120VAC,28VDC 2×20A/14VDC
Max. Switching Power 1C: 280W 1200VA 1W: 2280W 21200VA
Max. Switching Voltage 75VDC 380VAC Max. Switching Current:20A
Contact Resistance or Voltage drop አ50m Item 3.12 of IEC255-7
Electrical 105 Item 3.30 of IEC255-7
Operation
life Mechanical 107 Item 3.31 of IEC255-7
Coil Par ameter
Coil voltage
VDC
Dash
Numbers
Rated Max.
Coil
resistance
±10%
Pickup
voltage
VDC(max)
(75%of rated
voltage )
release voltage
VDC(min)
(10% of rated
voltage)
Coil power
consumption
W
Operate
Time
ms
Release
Time
ms
003-1000 3 3.9 9 2.25 0.3
005-1000 5 6.5 25 3.75 0.5
006-1000 6 7.8 36 4.50 0.6
009-1000 9 11.7 85 6.75 0.9
012-1000 12 15.6 145 9.00 1.2
018-1000 18 23.4 324 13.5 1.8
024-1000 24 31.2 576 18.0 2.4
1.0 10 5
012-1200 12 15.6 120 9.00 1.2 1.2 10 5
CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
115
4117
Open Type>>>>>Dust Covered >>
13.2×14×18 18×16.4×20
www.dblectro.com
Operation co ndi ti on
Insulation Resistance 100M
min (at 500VDC) Item 7 of IEC255-5
Dielectric Strength
Between contacts
Between contact and coil 50Hz 750V
50Hz 1500V Item 6 of IEC255-5
Item 6 of IEC255-5
Shock resistance 100m/s2 11ms IEC68-2-27 Test Ea
Vibration resistance 10~40Hz double amplitude 1.27mm IEC68-2-6 Test Fc
Terminals strength 10N IEC68-2-21 Test Ua1
Solderability 2352 30.5s IEC68-2-20 Test Ta method 1
Ambient Te mper ature -40~85
Relative Humidity 85% (at 40)IEC68-2-3Test Ca
Mass 9g(Open type) 12g
Qualification inspection:
Perform the qualification test as specified in the table of IEC255-19-1 and minimum sa mpl e siz e 24.
Dimensions (Unit: mm)
Reference Data
NOTES 1).Dimensions are in millimeter.
2).Inch equivalents are given for general information only.
4117
Dimensions
Wiring diagram
(Bottom views)
Mounting (Bottomz views)
mm >àçÇá
0.3 0.012
0.4 0.016
0.5 0.020
0.6 0.024
0.8 0.031
1.0 0.039
1.3 0.051
2.1 0.083
3.3 0.130
3.4 0.134
3.81 0.150
4.6 0.181
5.08 0.200
8.89 0.350
10.16 0.400
13.2 0.520
14 0.511
16.4 0.646
18 0.709
20 0.787
www.dblectro.com
