1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL
• Rated voltage: 275 VAC 50/60 Hz
• Capacitance range: 0.001 – 0.6 µF
• Lead spacing: 10.2 – 25.4 mm
• Capacitancetolerance:M=±20%(forC≤0.1µF),
K=±10%(forC>0.1µF)
• Climatic category: 40/110/56, IEC 60068–1
• Tape and reel in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof−40°C to +110°C
• 100% screening factory test at 2,150 VDC
Overview
The PME271M is constructed of multilayer metallized paper
encapsulated and impregnated in self-extinguishing material
meeting the requirements of UL 94 V–0.
Applications
Typical applications include worldwide use in
electromagnetic interference suppression in all X2 and
across-the-line applications.
Customer Part Number
PME271 M(B) 610(0) M R30
Series RatedVoltage(VAC) LeadSpacing(mm) CapacitanceCode(pF) Capacitance
Tolerance Packaging
X2, Metallized Paper M = 275 Blank = Standard
A = 10.2
B = 15.2
D = 22.5
The last three digits
representsignicant
gures.Therstdigit
speciesthetotal
number of digits.
M = ±20%
(forC≤0.1µF)
K = ±10%
(forC>0.1µF)
See Ordering
Options Table
KEMET Internal Part Number
P276 QE104 M275 A
Capacitor Class Series Lead Spacing
(mm) Size Code Capacitance
Code(pF)
Capacitance
Tolerance
Rated Voltage
(VAC) Packaging
P = Paper X2, Metallized
Paper
H = 10.2
Q = 15.2
C = 20.3
S = 22.5
E = 25.4
See Dimension
Table
First two digits
represent
signicant
gures.Third
digitspecies
number of
zeros.
M = ±20%
(forC≤0.1µF)
K = ±10%
(forC>0.1µF)
275 = 275 See Ordering
Options Table
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors
PME271M, Class X2, 275 VAC
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Benets cont.
• The highest possible safety regarding active and passive
ammability
• Excellent self-healing properties ensure long life even when
subjected to frequent over voltages
• Good resistance to ionization due to impregnated dielectric
• High dV/dt capability
• The impregnated paper ensures excellent stability and
outstanding reliability properties, especially in applications
with continuous operation
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
10.2
Standard Lead and Packaging Options
Bulk(Bag)–ShortLeads 6+0/−1 CR06
Bulk(Bag)–MaximumLengthLeads
30+5/−0
A
R30
Tape&Reel(StandardReel) H
0
= 18.5 ±0.5 LR19T0
Other Lead and Packaging Options
Tape&Reel(StandardReel) H
0
= 18.5 ±0.5 PR19T1
Native 10.2
formed to 7.5 Ammo Pack H0= 16.5 ±0.5 LAF3 R30XA
15.2
Standard Lead and Packaging Options
Bulk(Bag)–ShortLeads
6+0/−1
C
R06
Bulk(Bag)–MaximumLengthLeads
30+5/−0
A
R30
Tape&Reel(StandardReel) H
0
= 18.5 ±0.5 LR19T0
Other Lead and Packaging Options
Tape&Reel(StandardReel) H
0
= 18.5 ±0.5 PR19T1
20.3
Standard Lead and Packaging Options
Bulk(Tray)–ShortLeads
6+0/−1
C
R06
Bulk(Bag)–MaximumLengthLeads
30+5/−0
A
R30
Tape&Reel(StandardReel) H
0
= 18.5 ±0.5 LR19T0
Other Lead and Packaging Options
Tape&Reel(LargeReel) H
0
= 18.5 ±0.5 PR19T1
22.5
Standard Lead and Packaging Options
Bulk(Bag)–ShortLeads
6+0/−1
C
R06
Bulk(Bag)–MaximumLengthLeads
30+5/−0
A
R30
Tape&Reel(StandardReel) H
0
= 18.5 ±0.5 LR19T0
Other Lead and Packaging Options
Tape&Reel(LargeReel) H
0
= 18.5 ±0.5 PR19T1
25.4
Standard Lead and Packaging Options
Bulk(Tray)–ShortLeads
6+0/−1
C
R06
Bulk(Bag)–MaximumLengthLeads
30+5/−0
A
R30
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Dimensions – Millimeters
L B
FRONT VIEW SIDE VIEW
H
LL
p
d
Size Code p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
HE
10.2
±0.4
Maximum
7.5
Maximum
13.5
Maximum
0.6
±0.05
HH
10.2
±0.4
Maximum
8.2
Maximum
Maximum
0.6
±0.05
HL
10.2
±0.4
Maximum
10.5
Maximum
Maximum
0.6
±0.05
QE
15.2
±0.4
Maximum
10.5
Maximum
Maximum
0.8
±0.05
QL
15.2
±0.4
Maximum
12.5
Maximum
Maximum
0.8
±0.05
QP
15.2
±0.4
Maximum
13.5
Maximum
Maximum
0.8
±0.05
QS
15.2
±0.4
Maximum
14.3
Maximum
Maximum
0.8
±0.05
CE
20.3
±0.4
Maximum
14.0
Maximum
Maximum
0.8
±0.05
CJ
20.3
±0.4
Maximum
15.0
Maximum
Maximum
0.8
±0.05
CP
20.3
±0.4
Maximum
16.5
Maximum
Maximum
0.8
±0.05
SJ
22.5
±0.4
Maximum
17.0
Maximum
Maximum
0.8
±0.05
SP
22.5
±0.4
Maximum
19.0
Maximum
Maximum
0.8
±0.05
SU
22.5
±0.4
Maximum
22.0
Maximum
Maximum
0.8
±0.05
EG
25.4
±0.4
Maximum
17.3
Maximum
Maximum
1.0
±0.05
EJ
25.4
±0.4
Maximum
19.0
Maximum
Maximum
1.0
±0.05
EL
25.4
±0.4
Maximum
22.0
Maximum
Maximum
1.0
±0.05
Note: See Ordering Options Table for lead length (LL) options.
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Performance Characteristics
Rated Voltage 275 VAC 50/60 Hz
Capacitance Range 0.001 – 0.6 µF
Capacitance Tolerance ±20%, ±10%, ±5% on request
Temperature Range −40°C to +110°C
Climatic Category 40/110/56
Approvals ENEC, UL, cUL
Dissipation Factor Maximum Values at +23°C
1 kHz 1.3%
Test Voltage Between Terminals
The 100% screening factory test is carried out at 2,150 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test. It is not permitted to repeat this test as there is a
risk to damage the capacitor. KEMET is not liable in such case
for any failures.
Insulation Resistance
Minimum Values Between Terminals
C≤0.33µF ≥12,000MΩ
C > 0.33 µF ≥4,000MΩ•µF
In DC Applications Recommendedvoltage≤630VDC
Environmental Test Data
Test IEC Publication Procedure
Endurance EN/IEC 60384–14
1.25 x V
R
VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2
Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles
Active Flammability IEC 60384–14 VR+20surgepulsesat2.5kV(pulseevery5seconds)
Passive Flammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needle-ametest
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, 56 days
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Approvals
Mark Specication File Number
EN/IEC 60384–14 SE/0140–16D
UL 60384–14
CAN/CSA–E60384–14–09 E73869
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant and halogen-free.
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Maximum Dimensions in
mm Lead
Spacing
(p)
fo
(MHz)
dV/dt
(V/µs)
KEMET Internal
Part Number
Customer
Part Number
B H L
0.001 3.9 7.5 13.5 10.2 53 1,200 P276HE102M275(1) PME271M410M(1)
0.0015 3.9 7.5 13.5 10.2 44 1,200 P276HE152M275(1) PME271M415M(1)
0.0022 3.9 7.5 13.5 10.2 37 1,200 P276HE222M275(1) PME271M422M(1)
0.0033 4.1 8.2 13.5 10.2 30 1,200 P276HH332M275(1) PME271M433M(1)
0.0047 5.1 10.5 13.5 10.2 24 1,200 P276HL472M275(1) PME271M447M(1)
0.0068 5.1 10.5 13.5 10.2 21 1,200 P276HL682M275(1) PME271MA4680M(1)
0.0068 5.2 10.5 18.5 15.2 19 1,200 P276QE682M275(1) PME271M468M(1)
0.010 5.2 10.5 18.5 15.2 16 1,200 P276QE103M275(1) PME271M510M(1)
0.015 5.2 10.5 18.5 15.2 13 1,200 P276QE153M275(1) PME271M515M(1)
0.022 612.5 18.5 15.2 10 1,200 P276QL223M275(1) PME271M522M(1)
0.033 612.5 18.5 15.2 8.4 1,200 P276QL333M275(1) PME271M533M(1)
0.047 612.5 18.5 15.2 71,200 P276QL473M275(1) PME271M547M(1)
0.068 7.8 13.5 18.5 15.2 5.6 1,200 P276QP683M275(1) PME271M568M(1)
0.1 8.5 14.3 18.5 15.2 4.3 1,200 P276QS104M275(1) PME271MB6100M(1)
0.1 7.6 14 24 20.3 4.1 600 P276CE104M275(1) PME271M610M(1)
0.15 915 24 20.3 3.4 600 P276CJ154K275(1) PME271M615K(1)
0.22 11.3 16.5 24 20.3 2.7 600 P276CP224K275(1) PME271M622K(1)
0.1 817 27 22.5 3.9 600 P276SJ104M275(1) PME271MD6100M(1)
0.15 817 27 22.5 3.3 600 P276SJ154K275(1) PME271MD6150K(1)
0.22 10 19 27 22.5 2.6 600 P276SP224K275(1) PME271MD6220K(1)
0.27 12 22 27 22.5 2.3 400 P276SU274K275(1) PME271MD6270K(1)
0.33 12 22 27 22.5 2.1 400 P276SU334K275(1) PME271MD6330K(1)
0.27 10.5 17.3 30.5 25.4 2.4 400 P276EG274K275(1) PME271M627K(1)
0.33 12.1 19 30.5 25.4 2.1 400 P276EJ334K275(1) PME271M633K(1)
0.47 15.3 22 30.5 25.4 1.8 400 P276EL474K275(1) PME271M647K(1)
0.6 15.3 22 30.5 25.4 1.6 400 P276EL604K275(1) PME271M660K(1)
Capacitance
Value (µF) B (mm) H (mm) L (mm) Lead Spacing
(p) fo (MHz) dV/dt
(V/µs)
KEMET Internal
Part Number
Customer
Part Number
(1) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Soldering Process
TheimplementationoftheRoHSdirectivehasresultedintheselectionofSnAgCu(SAC)alloysorSnCualloysasprimarysolder.
This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C).
Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15
mm),andgreatcarehastobetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbeused.Please
consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid
guideline for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessofthe
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-holepartsafterthecuringofsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum)withthe
soldering duration not to exceed more than 3
seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering Time (seconds)
Soldering Iron Bit Temperature (°C)
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/second
ca 3.5°C/second typical
ca 5°C/second
Cooling
2 +3 seconds maximum
115 °C max
T
preheat
∆T < 150°C
100 °C
Preheating
Typical
First wave
Second wave
260°C
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Soldering Process cont.
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤10mm
Capacitor
Pitch
= 15 mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 130°C 270°C 270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Paper 130°C 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material Maximum temperature
measured inside the element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene Sulphide 160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering,andgreatcaremustbetakensothatthepartsarenotoverheated.
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Construction
Detailed Cross Section
Self-Extinguishing
Resin
Self-Extinguishing
Resin
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Metallized Impregnated Paper
(First Layer)
Margin
Margin
Metallized Impregnated Paper
(Second Layer)
Metal
Spraying
Material
Impregnated
Paper
Metallization
Single Design — Multilayer Impregnated Paper Dielectric
1 Section
Winding Scheme
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Marking
BACKFRONT
TOP
Capacitance Safety Class
Voltage
Approval
Mark
Series
IEC Climatic
Category Manufacturing
Date Code
Approval
Mark
Self
Healing
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard Reel
360 mm
Large Reel
500 mm
Ammo
Formed
10.2
3.9
7.5
13.5
2,000
1,000
700
1,400
800
4.1
8.2
13.5
2,000
1,000
600
780
5.1
10.5
13.5
1,600
800
600
1,200
630
15.2
5.5
12.5
18
1,000
500
600
6.5
12.5
18
600
400
400
7.5
14.5
18
600
400
400
8.5
16
18
400
250
400
5.2
10.5
18.5
1,000
500
600
5.5
11
18.5
1,000
500
500
6
12.5
18.5
600
400
400
7.3
13
18.5
600
400
400
800
7.8
13.5
18.5
600
400
400
8.5
14.3
18.5
500
300
350
20.3
7.6
14
24
1,500
250
250
500
8.4
14
24
1,200
200
250
500
9
15
24
1,500
200
250
11.3
16.5
24
1,000
150
180
400
22.5
8
17
27
1,200
200
10
19
27
1,000
150
200
12
22
27
800
100
180
350
25.4
10.6
16.1
30.5
1,000
150
10.5
17.3
30.5
1,000
100
12.1
19
30.5
800
100
15.3
22
30.5
600
75
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC
60286–2
Lead Spacing +0.6/−0.1 FFormed 7.5 10.2 15.2 20.3 22.5 F
Carrier Tape Width ±0.5 W18.0 18.0 18.0 18.0 18.0 18+1/−0.5
Hold-Down Tape Width Minimum W
0
5.0 5.0 5.0 5.0 5.0
Position of Sprocket Hole ±0.5 W
1
9.0 9.0 9.0 9.0 9.0 9+0.75/−0.5
Distance Between Tapes Maximum W
2
3.0 3.0 3.0 3.0 3.0 3.0
Sprocket Hole Diameter ±0.2 D
0
4.0 4.0 4.0 4.0 4.0 4.0
Feed Hole Lead Spacing ±0.3 P
0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance Lead – Feed Hole ±0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation Tape – Plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral Deviation Maximum ∆h 2.0 2.0 2.0 2.0 2.0 2.0
Total Thickness ±0.2 t0.7 0.7 0.7 0.7 0.9 Maximum 0.9 Maximum
Sprocket Hole/Cap Body Nominal H
0
(2) 18+2/−0 18+2/−0 18+2/−0 18+2/−0 18.5 ±0.5 18+2/−0
Sprocket Hole/Top of Cap Body Maximum H
1
(3) 43 43 43 58 58 58 Maximum
(1) Maximum cumulative feed hole error, 1 mm per 20 parts
(2) 16.5 mm available on request
(3) Depending on case size
(4) 15 mm available on request
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 – 7.5 mm
H1
H0
H0
P0P1D0
W2W0W1
H1
P0
W2
W0
D0
W
t
W1
H1
H0
P0D0
W2
W1
W0
D0
P1
∆p∆p∆p
∆p∆p
∆p
∆h∆h
W
∆h∆h
t
∆h∆h
FF
F = 7.5
W
W
P1
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H W T
R4x, R4x+R, R7x, RSB
360 340 59
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
330
330
50
Reel Speci cations
Series Dimensions (mm)
D H W
R4x, R4x+R, R7x, RSB 355
500
30
25 55(Max)
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46(Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2010
A
January
1
2011
B
February
2
2012
C
March
3
2013
D
April
4
2014
E
May
5
2015
F
June
6
2016
H
July
7
2017
J
August
8
2018
K
September
9
2019
L
October
O
2020
M
November
N
2021
N
December
D
2022
P
2023
R
2024
S
2025
T
2026
U
2027
V
2028
W
2029
X
2030
A
D
W
H
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3011_PME271M_X2_275 • 6/3/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Class X2
Metallized Impregnated Paper EMI Suppression Capacitors – PME271M, Class X2, 275 VAC
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.