© 2018 Littelfuse Commercial Vehicle Products
Rev: 120618
littelfuse.com 1 of 2
Product Datasheet
CONTINUOUS DUTY SOLENOIDS
6-32V DC • 65-200A • Uncoated or PVC-Coated
Specifications Overview
Voltage Ratings: 6, 12, 24, or 36V DC
Max Continuous Current: 65, 85, or 200A
Circuitry: Single Pole Single Throw (SPST)
Contact Form: Normally Open
Contact Terminals: Copper or Silver
Operating Temp: -40° to +85°C
Battery Terminals: 5/16 - 24 (35 in-lbs / 4.0 Nm)
Coil Studs: 10-32 (15 in-lbs / 1.7 Nm)
Mechanical Specifications
• SPST Normally open contacts.
• Plated steel housing. Hexnuts and washers included.
• Large (power circuit) battery studs; copper
5/16” -24 thread.
• Small (control circuit) coil studs; steel 10-32 thread.
• Bracket mounting holes 5/16 X 19/32” (7.9 X 15.1mm) on 2
13/64” centers (56.0mm).
• Available with PVC coated exterior or Potted Coil interiors
for harsh environments or vibration resistance.
• Caution: Never unscrew the inner hexnuts on the studs.
These keep the stud and inner wiring in place.
Ordering Information
See chart on page 2
Description
Minimizes arcing and contact oxidation, maintains high
performance. Universal use with part numbers available to
handle loads up to 200A.
PVC Coated option available for a more environmentally-
sealed product. Coated solenoids withstand moisture and
dust to IP66.
Where vehicle vibration is a problem, we recommend the
24213-01 in which the internal windings are potted for added
protection of coil leads and studs.
Web Resources
Download 2D prints and technical resources at:
littelfuse.com/solenoids
32
14
2
1 3
BAT +
2
1 3
BAT +
2
13
Diagram 1 Diagram 2 Diagram 3 Diagram 4
Electrical Schematic
Datasheet Replaces Hotfeed Number D-500
© 2018 Littelfuse Commercial Vehicle Products
Rev: 120618
littelfuse.com 2 of 2
Product Datasheet
Visit Littelfuse.com for the most up-to-date product information. Littelfuse products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive
applications) not expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in
applicable Littelfuse product documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable
Littelfuse product documentation.
PART NUMBERS
VOLTAGE
AMPS
INSULATED /
GROUNDED
CIRCUITRY
FORM /
CONTACTS
CONTACT
MATERIAL
PVC
COATED
UL LISTED
POTTED COIL
IMAGE
DIAGRAM
NOTES
BULK BOXED RETAIL
24080 24080-BX –
36
85 Insulated SPST NO Copper A 1
24080-01 – – 65 Insulated SPST NO Copper • A 1 Intermittent rating: 125A Make, 65A Break
10 sec on, 30 min off - UL Requirement
24200 24200-BX –110 Insulated SPST NO Copper ARefer to
2D Print Momentary switch, latching solenoid
24008 24008-BX –
24
120 Insulated SPST NO Copper ASpecial spring for stronger contact
return force
24008-03 – – 120 Insulated SPST NO Copper AComponents shipped unassembled
24063 24063-BX –85 Insulated SPST NO Silver A 1
24063-08 24063-08-BX –85 Insulated SPST NO Copper • • B 1
24214 24214-BX –200 Insulated SPST NO Silver A 1
24107 24107-BX –85 Insulated SPST NO Copper C 2
24124 24124-BX –85 Grounded SPST NO Copper C 4
24524-10D – – 100 Insulated SPST NO Copper Refer to
2D Print
Refer to
2D Print
24037 24037-BX –
12
750 Grounded SPST NO Copper C 4
24044 24044-BX –750 Grounded SPST NO Copper D 4
24047 24047-BX –750 Insulated SPST NO Copper A 1
24059 24059-BX 24059-BP 85 Insulated SPST NO Copper A 1
24059-08 24059-08-BX
24059-08-BP
65 Insulated SPST NO Copper • A 1 Intermittent rating: 750A Make, 100A Break
10 sec on, 30 min off - UL Requirement
24106-07 – – 85 Grounded SPST NO Copper C 4 P/N, Date Code, Voltage ink stamped
on surface
24115 24115-BX –85 Insulated SPST NO Copper C 3
24117 24117-BX –Insulated SPST NO Copper • B 1
24117-01 24117-01-BX 24117-01-BP Insulated SPST NO Copper • B 1
24213 24213-BX –200 Insulated SPST NO Silver A 1
24213-01 – – 200 Insulated SPST NO Silver • B 1 IP66
24213-03 – – 200 Insulated SPST NO Silver • B 1 Black PVC Coating • IP66
24106 24106-BX –85 Grounded SPST NO Copper C 4
24082 24082-BX –85 Grounded SPST NO Copper D 4 Curved Bracket
24097 24097-BX – 6 85 Grounded SPST NO Copper A 1
A B C D
Ordering Information
CONTINUOUS DUTY SOLENOIDS
