CO AE MPL C- IA Q1 NT 01 ,* CO *HA M LO PL G IA EN NT F RE E & *R oH S Features Applications Low leakage current: 1 nA Communication lines Bidirectional configuration Portable electronics ESD protection 30 kV max. Low capacitance: 3 pF typ. Replaces 0805 MLV devices RoHS compliant* and halogen free** AEC-Q101 compliant product*** CDSOD323-T24C-DSLQ - TVS Diode Series General Information Portable communications and telecom equipment manufacturers are challenging the semiconductor industry to develop increasingly smaller electronic components for highspeed communication rates. BIDIRECTIONAL 1 Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications in SOD323 package size format. Bourns(R) Chip Diodes conform to JEDEC The Bourns(R) device will assist compliance with IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements. 2 Absolute Maximum Ratings (@ TA = 25 C Unless Otherwise Noted) Parameter Symbol Peak Pulse Current (tp = 8/20 s) CDSOD323-T24C-DSLQ Unit IPPM 6 A TJ -55 to +150 C TSTG -55 to +150 C ESD 30 kV Symbol CDSOD323-T24C-DSLQ Unit Min. Breakdown Voltage @ 1 mA VBR 26.7 V Working Peak Voltage Vwm 24.0 V Maximum Clamping Voltage @ IP = 1 A VC 43.0 V Typical Clamping Voltage @ 8/20 s @ IPP VC 56.0 V @ 6 A V Maximum Leakage Current @ VWM ID 1 nA Typical Capacitance @ 0 V, 1 MHz CJ 3 pF Operating Temperature Storage Temperature ESD Protection (per IEC 61000-4-2) Contact Discharge Electrical & Thermal Characteristics (@ TA = 25 C Unless Otherwise Noted) Parameter * ** WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Bourns considers a product to be "halogen free" if (a) the Bromine (Br ) content is 900 ppm or less; (b) the Chlorine ( Cl ) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine ( Cl ) content is 1500 ppm or less. *** Q suffix for automotive and other applications requiring appropriate AEC-Q101 compliance for electronic limiters. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSOD323-T24C-DSLQ - TVS Diode Series Performance Graphs Typical Peak Pulse Power vs. Pulse Time Pulse Waveform 120 1,000 350 W, 8/20 s Waveform 100 10 0.1 IPP - Peak Pulse Current (% of IPP) PPP - Peak Pulse Current (W) 10,000 Test Waveform Parameters tt = 8 s td = 20 s tt 100 80 et 60 40 td = t|IPP/2 20 0 1 10 100 1,000 10,000 0 5 10 td - Pulse Duration (s) Block Diagram 15 20 25 30 t - Time (s) How to Order BIDIRECTIONAL 1 CD SOD323 - T 24 C - DSL Q Common Code Chip Diode Package * SOD323 = SOD-323 Package Model T = Transient Voltage Suppressor Working Peak Reverse Voltage 24 = 24 VRWM (Volts) 2 C = Bidirectional Diode -DSL = Low Leakage Current Q = AEC-Q101 Compliant Moisture Sensitivity Level ................................................................1 ............................................................. 3B Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSOD323-T24C-DSLQ - TVS Diode Series Product Dimensions Recommended Footprint This is a molded JEDEC SOD-323 package with lead free 100 % Sn plating on the terminations. It weighs approximately 30 mg and W C L S L A E Dimensions (Nominal) B F D H L 0.80 (0.031) S 1.40 (0.055) W 0.50 (0.020) J DIMENSIONS: MM (INCHES) Dimensions A 1.60 - 1.90 (0.063 - 0.075) B 1.15 - 1.45 (0.045 - 0.057) C 2.39 - 2.70 (0.094 - 0.106) D 0.92 - 1.14 (0.036 - 0.045) E 0.25 - 0.40 (0.010 - 0.016) F 0.08 - 0.20 (0.003 - 0.008) H 0 - 0.13 (0.000 - 0.005) J 0.30 - 0.45 (0.012 - 0.018) DIMENSIONS: Typical Part Marking Each device has device marking outlined below. CDSOD323-T24C-DSLQ ............................................................. 4D (Underline denotes AEC-Q101 compliancy) MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSOD323-T24C-DSLQ - TVS Diode Series Packaging Information The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Direction of Feed Item Symbol SOD-323 Carrier Width A 1.55 0.10 (0.061 0.004) Carrier Length B 2.90 0.10 (0.114 0.004) Carrier Depth C 1.35 0.10 (0.053 0.004) Sprocket Hole d 1.55 0.05 (0.061 0.002) Reel Outside Diameter D 178 (7.008) Reel Inner Diameter D1 80.0 ... Min. (3.150) Feed Hole Diameter D2 13.0 0.20 (0.512 0.008) Sprocket Hole Position E 1.75 0.10 (0.069 0.004) Punch Hole Position F 3.50 0.05 (0.138 0.002) Punch Hole Pitch P 4.00 0.10 (0.157 0.004) Sprocket Hole Pitch P0 4.00 0.10 (0.157 0.004) Embossment Center P1 2.00 0.05 (0.079 0.002) Overall Tape Thickness T 0.20 0.10 (0.008 0.004) Tape Width W 8.00 0.20 (0.315 0.008) Reel Width W1 13.5 . Max. (0.531) -- 3,000 Quantity per Reel MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A. Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 520 390 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV 11/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and P[ZHSPH[LZJVSSLJ[P]LS)V\YUZ Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL