Contact Us Search MySupermicro X8DTL-3F Products Motherboards Xeon Boards [ X8DTL-3F ] Key Features 1. Intel(R) Xeon(R) processor 5600/5500 series, with QPI up to 6.4 GT/s Links & Resources 2. Intel(R) 5500 (Tylersburg) Chipset 3. Up to 96GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 24GB Unbuffered DIMM Tested Memory List 4. Dual Intel(R) 82574L Gigabit Ethernet Controller Motherboard Manual Tested HDD / SSD List Update Your BIOS 5. Broadcom 1068E 8-Port SAS Controller RAID 0, 1, 10 RAID 5 optional IPMI Firmware 6. 6x SATA2 (3 Gbps) Ports via ICH10R Controller ATX 12"x10" SAS Xeon Tylersburg ServerBoard Download the Latest Drivers and Utilities 7. 2 (x8) PCI-E 2.0 (1 in x16 slot), 1 (x4) PCI-E 2.0 (in x8 slot), 1 (x4) PCI-E (in x8 slot), 2x PCI 33MHz slots Download Driver CD 8. Integrated Matrox G200eW Graphics 9. Integrated IPMI 2.0 with Dedicated LAN Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options. MBD-X8DTL3F -O X8DTL-3F (Standard Retail Pack) MBD-X8DTL3F -B X8DTL-3F (Bulk Pack) Chassis ( Optimized for X8DTL-3F ) 1U Chassis CSE-512F-600B CSE-811L-600B CSE-811TQ-600B 2U Chassis CSE-825TQ-560LPB CSE-826A-R1200LPB CSE-826E1-R800LPB CSE-826E2-R800LP CSE-826TQ-R800LPB 3U Chassis CSE-833T-550B CSE-833T-650B CSE-833T-R760B CSE-835TQ-R800B CSE-835TQ-R920B CSE-836A-R1200B CSE-836E1-R800B CSE-836E2-R800B CSE-836TQ-R800B CSE-933E1-R760B CSE-933E2-R760B CSE-933T-R760B CSE-936A-R1200B CSE-936A-R900B CSE-936E1-R900 Tower / 4U Rackmount CSE-745TQ-920B Important Chassis Notes To support the new generation Intel(R) Xeon(R) processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. Physical Stats Form Factor ATX Dimensions 12" x 10" (30.5cm x 25.4cm) Processor/Cache CPU Dual 1366-pin LGA Sockets Supports up to two Intel(R) 64-bit Xeon(R) processor(s) of the same type below: Intel(R) Xeon(R)Processor 5600 Series (Westmere) Intel(R) Xeon(R)Processor 5500 Series (Nehalem-EP) QPI up to 6.4 GT/s System Memory Memory Capacity 6x 240-pin DIMM slots Supports up to 96 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB , 8GB** , 16GB** Memory Voltage 1.5 V / 1.35 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel(R) x4 and x8 Single Device Data Correction (SDDC) Expansion Slots PCI-Express 2 (x8) PCI-E 2.0 (1 in x16 slot) 1 (x4) PCI-E 2.0 (in x8 slot) 1 (x4) PCI-E (in x8 slot) PCI 2x 33MHz PCI slots System BIOS BIOS Type 32Mb SPI Flash EEPROM with AMI(R) BIOS BIOS Features Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support On-Board Devices Chipset Intel(R) 5500 (Tylersburg) chipset ICH10R + IOH-24D SAS Broadcom SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support SATA Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) Management Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor(R) III Power Configurations ACPI / ACPM Power Management PC Health Monitoring IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 4-Phase-switching voltage regulator FAN Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control (4-pin fan only) * Winbond(R) WPCM450 BMC Network Controllers 2x Intel(R) 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Graphics Matrox G200eW Super I/O Winbond(R) 83627DHG-P chip Temperature Monitoring for CPU and chassis environment Thermal Control for 6x fan connectors PECI SAS 8 SAS / SATA ports Chassis intrusion detection Chassis intrusion header Serial ATA Six Serial ATA ports Six SATA hard drives supported Other Features LAN 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port USB 2x USB rear ports 1x USB on-board 2x USB internal headers Total 5 USB 2.0 Compliant VGA 1x VGA Port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Port / Header 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (Option) Input / Output Operating Environment Environmental Spec. Operating Temperature: 10 to 35 C (50 to 95F) Non-operating Temperature: -40 to 70 C (-40 to 158 F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) OS Compatibility * Please see our OS Compatibility Chart Parts List (Retail Pack) Part Number Qty Description X8DTL-3F MBD-X8DTL-3F -O 1 X8DTL-3F Motherboard I/O Cable 1 CBL-0044L 8 57.5CM SATA FLAT S-S PBF I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) Manual MNL-1076-QRG 1 X8DTL-3/I(F)/X8DTL-3/I-II QUICK REFERENCE GUIDE Note: Items in a Standard Retail Package may differ from items in a Standard Bulk Package. ** Please check 'Tested Memory List' for compatibility Terms & Conditions | Privacy | Investor Relations | Jobs | Site Map SuperServer(R) | Motherboard | Chassis | Rack Cabinet | SuperBlade(R) | Embedded | Networking | Storage | Accessories | AMD Solution | Power Supplies Copyright (c) 2019 Super Micro Computer, Inc. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.