Digital Multimeters Tektronix DMM4020 Data Sheet Available Functions and Features Volts, Ohms, and Amps Measurements Diode and Continuity Testing Frequency Measurements 2x4 Ohms 4-wire Measurement Technique Dedicated DC Leakage Current Measurements Six Dedicated Buttons for Fast Access to Instrument Setups Limit Compare Mode for Pass/Fail Testing Connectivity Front 2x4 Measurement Inputs DMM4020 Features & Benefits Key Performance Specifications 5.5 Digit Resolution Basic VDC Accuracy of up to 0.015% (1 yr.) 200 mV to 1000 V Voltage Range, with up to 10 V Resolution 200 A to 10 A Current Range, with up to 1 nA Resolution 200 to 100 M Ohm Range, with up to 1 m Resolution CAT I 1000 V, CAT II 600 V RS-232 on Rear Panel for Quick PC Connectivity Includes USB to RS-232 Interface Adapter Cable Includes National Instrument's LabVIEW SignalExpressTM TE Limited Edition for Connecting Your Bench 3-year Warranty Data Sheet Measurements with the Push of a Button As the circuits in embedded system designs become more sophisticated, you must measure a multitude of different parameters to validate your design. The Tektronix DMM4020 5.5 digit bench multimeter offers a broad range of functions in one easy-to-use instrument. Typical multimeter measurements - volts, ohms, and amps - are made with a basic VDC accuracy of up to 0.015%, ensuring you have the performance you need for your design. You can also use the DMM4020 to measure frequency, and to perform continuity and diode tests. This allows you to replace your counter, continuity tester, and DMM with one versatile instrument, saving bench space and cost. Measure Nanoampere Signals Measuring standby current in today's energy-efficient designs requires looking at very low currents, often in the microamp or nanoamp range. Using a traditional multimeter for this measurement can lead to inaccurate results since they typically employ the shunt resistance technique for measuring current. The DMM4020 offers an improved method for measuring low currents. By using a current-to-voltage op amp technique, the DMM4020 can make current measurements with 1 nA of resolution and with minimal loading affect on the circuit under test, giving results that reflect real-world operation of the device. Designed to Make Your Work Easier The DMM4020 multimeter is designed with the ease-of-use and familiar operation you expect from Tektronix. Intuitive Operation Dedicated front-panel buttons provide fast access to frequently used functions and parameters, reducing setup time. You no longer need to search through software menus to find the function you need. 2 www.tektronix.com Limit compare mode on the DMM4020. Setup Buttons for Your Common Measurements With six setup buttons on the front panel, you can save the settings for your most common measurements. Simply set up the meter for a measurement, then press shift followed by a setup button to save the measurement settings. Now each time you perform that measurement, you simply press the appropriate setup key. Dual Display With the unique dual display, you can measure two different parameters of the same signal from one test connection. Limit Compare The limit compare mode provides pass/fail indicators to quickly show if a test passes or fails to help eliminate mistakes, especially for results that are close to the limit. Simple and Accurate 4-wire Measurements Patented split terminal jacks for the 2x4 ohms function allow you to perform 4-wire measurements using only two leads instead of four. Special test lead accessories are available to enable you to establish the connection. You get excellent resolution and accuracy plus the convenience and ease of using a single pair of leads. Easy Connectivity to Your PC The RS-232 port on the back panel can be used to connect to your PC. A USB to RS-232 interface adapter cable is included standard with the DMM4020 for connecting to your PC's USB port. Digital Multimeters -- Tektronix DMM4020 Signal Express acquiring data from Tektronix DMM4020 and DPO3052. Connect Your Bench for Intelligent Debug Easily capture, save, and analyze measurement results from your multimeter with the special Tektronix Edition of National Instrument's LabVIEW SignalExpressTM software. Every DMM4020 multimeter ships with a free copy of the Limited Edition version of SignalExpress for basic instrument control, data logging, and analysis. The optional Professional Edition offers over 200 built-in functions that provide additional signal processing, advanced analysis, sweeping, limit testing, and user-defined step capabilities. SignalExpress supports the range of Tektronix bench instruments*1, enabling you to connect your entire test bench. You can then access the Signal Express used to export DMM4020 data into Excel. feature-rich tools packed into each instrument from one intuitive software interface. This allows you to automate complex measurements requiring multiple instruments, log data for an extended period of time, time-correlate data from multiple instruments, and easily capture and analyze your results, all from your PC. Only Tektronix offers a connected test bench of intelligent instruments to simplify and speed debug of your complex design. Performance You Can Count On In addition to industry-leading service and support, every DMM4020 multimeter comes backed with a three-year standard warranty. *1 NI LabVIEW Signal Express supports the following Tektronix instruments: MSO/DPO4000/3000/2000 Series oscilloscopes, TDS3000C/2000B/1000B Series oscilloscopes, AFG3000 Series arbitrary/function generators, DMM4050/4040/4020 Series digital multimeters. www.tektronix.com 3 Data Sheet Characteristics General Specifications Triggering Voltage Characteristic Description 100V Setting 120V Setting 220V Setting 240V Setting Frequency Power Consumption 90 V to 110 V 108 V to 132 V 198 V to 242 V 216 V to 264 V 47 Hz to 440 Hz 15 VA peak (10 W average) mm in. Height Width Depth 88 217 297 3.46 8.56 11.7 Weight kg lb. Net 2.1 4.6 Electrical Characteristic Description Input Protection Overrange 1000 V all ranges 10% on the largest ranges of all functions except continuity and diode test Remote Interfaces Display Vacuum Fluorescent Display, segment RS-232C (RS-232 to USB Adapter cable included) Warranty Environment Description Temperature Operating 0 C to 50 C Storage -40 C to 70 C Warm Up 1/2 hour to full uncertainty specifications Relative Humidity (noncondensing) Operating Uncontrolled (<10 C) <90% (10 C to 28 C) <75% (28 C to 40 C) <45% (40 C to 50 C) Storage <95% (-40 C to 70 C) Altitude 2,000 meters Operating 12,000 meters Storage Vibration Complies with MIL-PRF-28800F Class 3 Safety Complies with IEC 61010-1:2001, ANSI/ISA 61010-1 (S82.02.01):2004, UL 61010-1:2004, CAN/CSA C22.2 No. 61010.1:2004, CAT I 1000V / CAT II 600 V EMC Designed to comply with IEC 61326-1:1997+A1:1998+A2:2000 www.tektronix.com 400 ms <2 ms <1 ms TTL Levels 5 V max Min/max, relative, hold, compare, and dB functions Dimension 4 Description Trigger Delay External Trigger Delay External Trigger Jitter Trigger Input Trigger Output Math Functions Dimensions Characteristic Characteristic Three years Digital Multimeters -- Tektronix DMM4020 Electrical Specifications DC Voltage Specifications Specifications are valid for 51/2 digit mode and after at least a half-hour warm-up. Characteristic Description Maximum Input Common Mode Rejection Normal Mode Rejection A/D Nonlinearity Input Bias Current Settling Considerations 1000 V on any range 120 dB at 50 or 60 Hz 0.1% (1 k unbalance) 80 dB at Slow Rate 15 ppm of range <30 pA at 25 C Measurement settling times are affected by source impedance, cable dielectric characteristics, and input signal changes Input Characteristics Range 200 mV 2V 20 V 200 V 1000 V Resolution Input Impedance Full Scale (51/2 Digits) Slow Medium Fast 199.999 mV 1.99999 V 19.9999 V 199.999 V 1000.00 V 1V 10 V 100 V 1 mV 10 mV 10 V 100 V 1000 V 10 mV 100 mV 10 V 100 V 1000 V 10 mV 100 mV >10 G*2 >10 G*2 10 M 1% 10 M 1% 10 M 1% *2 At some dual-display measurements, the input impedance of 200 mV and 2 V ranges may be changed to 10 M. Accuracy Range Uncertainty*3 90 days 200 mV 2V 20 V 200 V 1000 V 1 year 23 C 5 C 23 C 5 C 0.01 0.01 0.01 0.01 0.01 0.015 0.015 0.015 0.015 0.015 + + + + + 0.003 0.002 0.003 0.002 0.002 + + + + + 0.004 0.003 0.004 0.003 0.003 Temperature Coefficient/C Outside 18 - 28 C 0.0015 + 0.0005 0.001 + 0.0005 0.0020 + 0.0005 0.0015 + 0.0005 0.0015 + 0.0005 *3 Uncertainty given as (% of reading + % of range). www.tektronix.com 5 Data Sheet AC Voltage Specifications AC Voltage specifications are for AC sinewave signals >5% of range. For inputs from 1% to 5% of range and <50 kHz, add an additional error of 0.1% of range, and for 50 kHz to 100 kHz, add 0.13% of range. Characteristic Description Maximum Input Measurement Method 750 VRMS or 1000 V peak or 8 x 107 Volts-Hertz product AC-coupled true RMS. Measures the AC component of input with up to 1000 VDC bias on any range 20 Hz - 100 kHz 60 dB at 50 Hz or 60 Hz (1 k unbalance) AC Filter Bandwidth Common Mode Rejection Maximum Crest Factor Additional Crest Factor Errors (<100 Hz) 3:1 at Full Scale Crest Factor 1-2, 0.05% of full scale Crest Factor 2-3, 0.2% of full scale Only applies for non-sinusoid signals Input Characteristics Range 200 mV 2V 20 V 200 V 750 V Input Impedance Resolution Full Scale (51/2 Digits) Slow Medium Fast 199.999 mV 1.99999 V 19.9999 V 199.999 V 750.00 V 1 V 10 V 100 V 1 mV 10 mV 10 V 100 V 1000 V 10 mV 100 mV 10 V 100 V 1000 V 10 mV 100 mV 1 M 2% shunted by <100 pf Accuracy Range 200 mV 2V 20 V 200 V 750 V *3 Uncertainty given as (% of reading + % of range). 6 www.tektronix.com Frequency 20 Hz - 45 Hz 45 Hz - 20 kHz 20 kHz - 50 kHz 50 kHz - 100 kHz 20 Hz - 45 Hz 45 Hz - 20 kHz 20 kHz - 50 kHz 50 kHz - 100 kHz 20 Hz - 45 Hz 45 Hz - 20 kHz 20 kHz - 50 kHz 50 kHz - 100 kHz 20 Hz - 45 Hz 45 Hz - 20 kHz 20 kHz - 50 kHz 50 kHz - 100 kHz 20 Hz - 45 Hz 45 Hz - 20 kHz 20 kHz - 50 kHz 50 kHz - 100 kHz Uncertainty*3 90 days 1 year 23 C 5 C 23 C 5 C 0.8 + 0.05 0.15 + 0.05 0.3 + 0.05 0.8 + 0.05 0.8 + 0.05 0.15 + 0.05 0.3 + 0.05 0.8 + 0.05 0.8 + 0.05 0.15 + 0.05 0.3 + 0.05 0.8 + 0.05 0.8 + 0.05 0.15 + 0.05 0.3 + 0.05 0.8 + 0.05 0.8 + 0.05 0.15 + 0.05 0.3 + 0.05 0.8 + 0.05 0.9 + 0.05 0.2 + 0.05 0.35 + 0.05 0.9 + 0.05 0.9 + 0.05 0.2 + 0.05 0.35 + 0.05 0.9 + 0.05 0.9 + 0.05 0.2 + 0.05 0.35 + 0.05 0.9 + 0.05 0.9 + 0.05 0.2 + 0.05 0.35 + 0.05 0.9 + 0.05 0.9 + 0.05 0.2 + 0.05 0.35 + 0.05 0.9 + 0.05 Temperature Coefficient/C Outside 18 - 28 C 0.01 + 0.005 0.01 + 0.005 0.01 + 0.005 0.05 + 0.01 0.01 + 0.005 0.01 + 0.005 0.01 + 0.005 0.05 + 0.01 0.01 + 0.005 0.01 + 0.005 0.01 + 0.005 0.05 + 0.01 0.01 + 0.005 0.01 + 0.005 0.01 + 0.005 0.05 + 0.01 0.01 + 0.005 0.01 + 0.005 0.01 + 0.005 0.05 + 0.01 Digital Multimeters -- Tektronix DMM4020 Resistance Specifications are for 4-wire resistance function, or 2-wire resistance with REL. If REL is not used, add 0.2 for 2-wire resistance plus lead resistance. Characteristic Description Measurement Method Max Lead Resistance (4-wire ohms) Input Protection Current source referenced to LO input 10% of range per lead for 200 , 2 k ranges. 1 k per lead on all other ranges. 1000 V on all ranges Input Characteristics Range 200 2 k 20 k 200 k 2 M 20 M 100 M Resolution Full Scale (51/2 Digits) Slow Medium Fast Current Source 199.999 1.99999 k 19.9999 k 199.999 k 1.99999 M 19.9999 M 100.000 M 0.001 0.01 0.1 1 10 100 1 k 0.01 0.1 1 10 100 1 k 10 k 0.01 0.1 1 10 100 1 k 10 k 0.8 mA 0.8 mA 0.08 mA 0.008 mA 0.9 A 0.16 A 0.16 A || 10 M Accuracy Range 200 2 k 20 k 200 k 2 M 20 M 100 M Uncertainty*3 90 days 1 year 23 C 5 C 23 C 5 C 0.02 + 0.004 0.015 + 0.002 0.015 + 0.002 0.015 + 0.002 0.03 + 0.003 0.2 + 0.003 1.5 + 0.004 0.03 0.02 0.02 0.02 0.04 0.25 1.75 + + + + + + + 0.004 0.003 0.003 0.003 0.004 0.003 0.004 Temperature Coefficient/C Outside 18 - 28 C 0.003 + 0.0006 0.003 + 0.0005 0.003 + 0.0005 0.003 + 0.0005 0.004 + 0.0005 0.01 + 0.0005 0.2 + 0.0005 *3 Uncertainty given as (% of reading + % of range). www.tektronix.com 7 Data Sheet DC Current Characteristic Description Input Protection Tool-accessible 11 A / 1000 V and 440 mA / 1000 V fuses 0.01 for 2 A and 10 A ranges 1 for 20 mA and 200 mA Burden voltage <5 mV for 200 A and 2 mA range Shunt Resistance Input Characteristics Range 200 A 2 mA 20 mA 200 mA 2A 10 A Resolution Burden Voltage Full Scale (51/2 Digits) Slow Medium Fast 199.999 A 1999.99 A 19.9999 mA 19.9999 mA 1.99999 A 10.0000 A 0.001 A 0.01 A 0.1 A 1 A 10 A 100 A 0.01 A 0.1 A 1 A 10 A 100 A 1 mA 0.01 A 0.1 A 1 A 10 A 100 A 1 mA <5 mV <5 mV <0.05 V <0.5 V <0.1 V <0.5 V Accuracy Range 200 A 2 mA 20 mA 200 mA 2A 10 A *3 Uncertainty given as (% of reading + % of range). 8 www.tektronix.com Uncertainty*3 90 days 1 year 23 C 5 C 23 C 5 C 0.02 + 0.005 0.015 + 0.005 0.03 + 0.02 0.02 + 0.005 0.05 + 0.02 0.18 + 0.01 0.03 + 0.005 0.02 + 0.005 0.04 + 0.02 0.03 + 0.008 0.08 + 0.02 0.2 + 0.01 Temperature Coefficient/C Outside 18 - 28 C 0.003 0.002 0.005 0.005 0.008 0.008 + + + + + + 0.001 0.001 0.001 0.001 0.001 0.001 Digital Multimeters -- Tektronix DMM4020 AC Current The following AC current specifications are for sinusoidal signals with amplitudes greater than 5% of range. For inputs from 1% to 5% of range, add an additional error of 0.1% of range. Characteristic Description Input Protection Tool-accessible 11 A / 1000 V and 440 mA / 1000 V fuses AC-coupled true RMS 0.01 for 2 A and 10 A ranges 1 for 20 mA and 200 mA 20 Hz - 100 kHz 3:1 at Full Scale Crest Factor 1-2, 0.05% of full scale Crest Factor 2-3, 0.2% of full scale Only applies to non-sinusoid signals Measurement Method Shunt Resistance AC Filter Bandwidth Maximum Crest Factor Additional Crest Factor Errors (<100 Hz) Input Characteristics Range 20 mA 200 mA 2A 10 A Resolution Burden Voltage Full Scale (51/2 Digits) Slow Medium Fast 19.9999 mA 199.999 mA 1.99999 A 10.0000 A 0.1 A 1 A 10 A 100 A 1 A 10 A 100 A 1 mA 1 A 10 A 100 A 1 mA <0.05 V <0.5 V <0.1 V <0.5 V Accuracy Range 20 mA 200 mA 2A 10 A Frequency 20 Hz - 45 Hz 45 Hz - 2 kHz 20 Hz - 45 Hz 45 Hz - 2 kHz 20 Hz - 45 Hz 45 Hz - 2 kHz 20 Hz - 45 Hz 45 Hz - 2 kHz Uncertainty*3 90 days 1 year 23 C 5 C 23 C 5 C 1 + 0.05 0.25 + 0.05 0.8 + 0.05 0.25 + 0.05 1 + 0.05 0.25 + 0.05 1 + 0.1 1 + 0.1 1.25 + 0.06 0.3 + 0.06 1 + 0.06 0.3 + 0.06 1.25 + 0.06 0.3 + 0.06 1.25 + 0.12 0.5 + 0.12 Temperature Coefficient/C Outside 18 - 28 C 0.015 + 0.005 0.015 + 0.005 0.015 + 0.005 0.015 + 0.005 0.015 + 0.005 0.015 + 0.005 0.015 + 0.005 0.015 + 0.005 *3 Uncertainty given as (% of reading + % of range). www.tektronix.com 9 Data Sheet Frequency Characteristic Description Gate Time 131 ms Measurement Method AC-coupled input using the AC voltage measurement function Settling Considerations When measuring frequency after a DC offset voltage change, errors may occur. For the most accurate measurement, wait up to 1 second to allow input-blocking RC time constant to settle Measurement Considerations To minimize measurement errors, shield inputs from external noise when measuring low-voltage, low-frequency signals Input Characteristics Range Frequency 20 Hz - 2 kHz 2 kHz - 20 kHz 20 kHz - 200 kHz 200 kHz - 1 MHz 100 mV to 750 V*4, 5 Uncertainty 90 days 1 year 23 C 5 C 23 C 5 C 0.01 + 0.002 0.01 + 0.002 0.01 + 0.002 0.01 + 0.004 0.01 + 0.003 0.01 + 0.003 0.01 + 0.003 0.01 + 0.006 Temperature Coefficient/C Outside 18 - 28 C *4 Input >100 mV. *5 Limited to 8 x 107 V Hz. Continuity Diode Test Characteristic Description Characteristic Description Continuity Threshold Test Current Response Time Rate Maximum Reading Resolution 20 1 mA 100 S/s with audible tone Fast 199.99 0.01 Response Time Rate Maximum Reading Resolution 100 S/s with audible tone Fast 1.9999 V 0.1 mV 10 www.tektronix.com 0.002 + 0.001 0.002 + 0.001 0.002 + 0.001 0.002 + 0.002 Digital Multimeters -- Tektronix DMM4020 Ordering Information Models Model Description DMM4020 5.5 Digit Multimeter Service Options*6 Option Description Opt. CA1 Provides a single calibration event or coverage for the designated calibration interval, whichever comes first Calibration Service 3 Years Calibration Service 5 Years Calibration Data Report Repair Service 5 Years (including warranty) Opt. Opt. Opt. Opt. C3 C5 D1 R5 DMM4020 Includes: Meter, TL710 test leads, line cord, spare line fuse, statement of cal practices, Warranty statement, Safety and Installation Guide, Connectivity Installation Manual, CD-ROM with user manual (English, French, Italian, German, Spanish, Simplified Chinese, Traditional Chinese, Korean, Russian, Japanese), RS-232 to USB Adapter Cable, National Instruments LabVIEW SignalExpressTM Tektronix Edition, Limited Edition Software. *6 Test Leads and accessories are not covered by the DMM warranty and Service Offerings. Refer to the datasheet of each Test Lead and accessory model for its unique warranty and calibration terms. Please specify power plug when ordering. Accessory Description Calibration Manual TL710 TL705 TL725 AC4000 HCTEK4321 Y8846S Y8846D 013-0369-xx SIGEXPTE 077-0365-xx Premium Test Leads (196-3250-xx) 2x4 Wire Ohm 1000 V Precision Test Lead 2x4 Wire Ohm SMD Test Tweezers Soft Transit Case Hard Carrying Case Single Rackmount Kit Dual Rackmount Kit Calibration Fixture 4-terminal short NI LabVIEW SignalExpress Tektronix Edition Software - Full Version Instrument Options Power Plug Options Option Description Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. North America Universal Euro United Kingdom Australia Switzerland Japan China India No power cord Euro and UK power cords A0 A1 A2 A3 A5 A6 A10 A11 A99 E1 Recommended Accessories and Software Product(s) are manufactured in ISO registered facilities. Product(s) complies with IEEE Standard 488.1-1987 and RS-232C. www.tektronix.com 11 Data Sheet Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria +41 52 675 3777 Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 07 81 60166 Brazil +55 (11) 3759-7627 Canada 1 (800) 661-5625 Central East Europe, Ukraine, and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France +33 (0) 1 69 86 81 81 Germany +49 (221) 94 77 400 Hong Kong (852) 2585-6688 India (91) 80-42922600 Italy +39 (02) 25086 1 Japan 81 (3) 6714-3010 Luxembourg +44 (0) 1344 392400 Mexico, Central/South America & Caribbean 52 (55) 54247900 Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 090 02 021797 Norway 800 16098 People's Republic of China 86 (10) 6235 1230 Poland +41 52 675 3777 Portugal 80 08 12370 Republic of Korea 82 (2) 6917-5000 Russia & CIS +7 (495) 7484900 South Africa +27 11 206 8360 Spain (+34) 901 988 054 Sweden 020 08 80371 Switzerland +41 52 675 3777 Taiwan 886 (2) 2722-9622 United Kingdom & Ireland +44 (0) 1344 392400 USA 1 (800) 426-2200 For other areas contact Tektronix, Inc at: 1 (503) 627-7111 Updated 5 August 2009 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com Copyright (c) Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 08 Sep 2009 www.tektronix.com 3MW-24431-0