SFH610A-1 - Vishay [Semiconductors]

Document Number: 83666 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 2.0, 10-Dec-08 607

Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

SFH610A, SFH6106

Vishay Semiconductors

DESCRIPTION

The SFH610A (DIP) and SFH6106 (SMD) feature a high

current transfer ratio, low coupling capacitance and high

isolation voltage. These couplers have a GaAs infrared diode

emitter, which is optically coupled to a silicon planar

phototransistor detector, and is incorporated in a plastic

DIP-4 or SMD package.

The coupling devices are designed for signal transmission

between two electrically separated circuits.

The couplers are end-stackable with 2.54 mm spacing.

Creepage and clearance distances of > 8.0 mm are achieved

with option 6. This version complies with IEC 60950

(DIN VDE 0805) for reinforced insulation up to an operation

voltage of 400 VRMS or DC. Specifications subject to change.

FEATURES

• Good CTR linearity depending on forward

current

• Isolation test voltage, 5300 VRMS

• High collector emitter voltage, VCEO = 70 V

• Low saturation voltage

• Fast switching times

• Low CTR degradation

• Temperature stable

• Low coupling capacitance

• End stackable, 0.100" (2.54 mm) spacing

• High common mode interference immunity

• Lead (Pb)-free component

• Component in accordance to RoHS 2002/95/EC and

WEEE 2002/96/EC

AGENCY APPROVALS

• UL1577, file no. E52744 system code H or J, double

protection

• DIN EN 60747-5-5 (VDE 0884) available with option 1

• CSA 93751

• BSI IEC 60950; IEC 60065

Note

For additional information on the available options refer to option information.

FH610A

i179056

SFH6106

ORDER INFORMATION

PART REMARKS

SFH610A-1 CTR 40 % to 80 %, DIP-4

SFH610A-2 CTR 63 % to 125 %, DIP-4

SFH610A-3 CTR 100 % to 200 %, DIP-4

SFH610A-4 CTR 160 % to 320 %, DIP-4

SFH610A-5 CTR 250 % to 500 %, DIP-4

SFH6106-1 CTR 40 % to 80 %, SMD-4

SFH6106-2 CTR 63 % to 125 %, SMD-4

SFH6106-3 CTR 100 % to 200 %, SMD-4

SFH6106-4 CTR 160 % to 320 %, SMD-4

SFH6106-5T CTR 250 % to 500 %, SMD-4, tape and reel

SFH610A-1X006 CTR 40 % to 80 %, DIP-4 400 mil

SFH610A-1X018T CTR 40 % to 80 %, SMD-4 400 mil, wide leadspread

SFH610A-2X006 CTR 63 % to 125 %, DIP-4 400 mil

SFH610A-3X006 CTR 100 % to 200 %, DIP-4 400 mil

SFH610A-3X007 CTR 100 % to 200 %, SMD-4

SFH610A-4X006 CTR 160 % to 320 %, DIP-4 400 mil

www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83666

608 Rev. 2.0, 10-Dec-08

SFH610A, SFH6106

Vishay Semiconductors Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

Notes

(1) Tamb = 25 °C, unless otherwise specified.

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not

implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum

ratings for extended periods of the time can adversely affect reliability.

(2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through

hole devices (DIP).

ABSOLUTE MAXIMUM RATINGS (1)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

Reverse voltage VR6V

DC forward current IF60 mA

Surge forward current t ≤ 10 µs IFSM 2.5 A

Power dissipation Pdiss 100 mW

OUTPUT

Collector emitter voltage VCE 70 V

Emitter collector voltage VEC 7V

Collector current IC50 mA

tp ≤ 1.0 ms IC100 mA

Power dissipation Pdiss 150 mW

COUPLER

Isolation test voltage

between emitter and detector VISO 5300 VRMS

Creepage distance ≥ 7mm

Clearance distance ≥ 7mm

Insulation thickness between

emitter and detector ≥ 0.4 mm

Comparative tracking index per DIN

IEC112/VDE 0303 part 1 ≥ 175

Isolation resistance VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω

VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω

Storage temperature range Tstg - 55 to + 150 °C

Ambient temperature range Tamb - 55 to + 100 °C

Soldering temperature (2) max. 10 s, dip soldering distance

to seating plane ≥ 1.5 mm Tsld 260 °C

ELECTRICAL CHARACTERISTICS

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

INPUT

Forward voltage IF = 60 mA VF1.25 1.65 V

Reverse current VR = 6 V IR0.01 10 µA

Capacitance VR = 0 V, f = 1 MHz CO13 pF

Thermal resistance Rthja 750 K/W

OUTPUT

Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE 5.2 pF

Thermal resistance Rthja 500 K/W

Collector emitter leakage current VCE = 10 V

SFH610A-1 ICEO 250nA

SFH6106-1 ICEO 250nA

SFH610A-2 ICEO 250nA

SFH6106-2 ICEO 250nA

SFH610A-3 ICEO 5 100 nA

SFH6106-3 ICEO 5 100 nA

SFH610A-4 ICEO 5 100 nA

SFH6106-4 ICEO 5 100 nA

SFH610A-5 ICEO 5 100 nA

SFH6106-5T ICEO 5 100 nA

Document Number: 83666 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 2.0, 10-Dec-08 609

SFH610A, SFH6106

Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

Vishay Semiconductors

Note

Tamb = 25 °C, unless otherwise specified.

Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements.

COUPLER

Collector emitter saturation

voltage IF = 10 mA, IC = 2.5 mA VCEsat 0.25 0.4 V

Coupling capacitance f = 1 MHz CC0.4 pF

CURRENT TRANSFER RATIO

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

IC/IF

IF = 10 mA, VCE = 5.0 V

SFH610A-1 CTR 40 80 %

SFH6106-1 CTR 40 80 %

SFH610A-2 CTR 63 125 %

SFH6106-2 CTR 63 125 %

SFH610A-3 CTR 100 200 %

SFH6106-3 CTR 100 200 %

SFH610A-4 CTR 160 320 %

SFH6106-4 CTR 160 320 %

SFH610A-5 CTR 250 500 %

SFH6106-5T CTR 250 500 %

IF = 1 mA, VCE = 5 V

SFH610A-1 CTR 13 30 %

SFH6106-1 CTR 13 30 %

SFH610A-2 CTR 22 45 %

SFH6106-2 CTR 22 45 %

SFH610A-3 CTR 34 70 %

SFH6106-3 CTR 34 70 %

SFH610A-4 CTR 56 90 %

SFH6106-4 CTR 56 90 %

SWITCHING CHARACTERISTICS

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

NON-SATURATED

Current VCC = 5 V, RL = 75 ΩIF10 mA

Rise time VCC = 5 V, RL = 75 Ωtr2µs

Fall time VCC = 5 V, RL = 75 Ωtf2µs

Turn-on time VCC = 5 V, RL = 75 Ωton 3µs

Turn-off time VCC = 5 V, RL = 75 Ωtoff 2.3 µs

Cut-off frequency VCC = 5 V FCO 250 kHz

SATURATED

Current

SFH610A-1 IF20 mA

SFH6106-1

SFH610A-2 IF10 mA

SFH6106-2

SFH610A-3 IF10 mA

SFH6106-3

SFH610A-4 IF5mA

SFH6106-4

ELECTRICAL CHARACTERISTICS

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83666

610 Rev. 2.0, 10-Dec-08

SFH610A, SFH6106

Vishay Semiconductors Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

Note

All values presented are typical values.

SATURATED

Rise time

SFH610A-1 tr2µs

SFH6106-1

SFH610A-2 tr3µs

SFH6106-2

SFH610A-3 tr3µs

SFH6106-3

SFH610A-4 tr4µs

SFH6106-4

Fall time

SFH610A-1 tf11 µs

SFH6106-1

SFH610A-2 tf14 µs

SFH6106-2

SFH610A-3 tf14 µs

SFH6106-3

SFH610A-4 tf15 µs

SFH6106-4

Turn-on time

SFH610A-1 ton 3µs

SFH6106-1

SFH610A-2 ton 4.2 µs

SFH6106-2

SFH610A-3 ton 4.2 µs

SFH6106-3

SFH610A-4 ton 6µs

SFH6106-4

Turn-off time

SFH610A-1 toff 18 µs

SFH6106-1

SFH610A-2 toff 23 µs

SFH6106-2

SFH610A-3 toff 23 µs

SFH6106-3

SFH610A-4 toff 25 µs

SFH6106-4

SWITCHING CHARACTERISTICS

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

Document Number: 83666 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 2.0, 10-Dec-08 611

SFH610A, SFH6106

Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

Vishay Semiconductors

Note

As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the

safety ratings shall be ensured by means of protective circuits.

TYPICAL CHARACTERISTICS

Tamb = 25 °C, unless otherwise specified

Fig. 1 - Linear Operation (without Saturation)

Fig. 2 - Current Transfer Ratio (CTR) vs. Temperature

Fig. 3 - Switching Operation (with Saturation)

Fig. 4 - Output Characteristics (Typ.) Collector Current vs.

Collector Emitter Voltage

SAFETY AND INSULATION RATINGS

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Climatic classification

(according to IEC 68 part 1) 55/100/21

Comparative tracking index CTI 175 399

VIOTM 10000 V

VIORM 890 V

PSO 400 mW

ISI 275 mA

TSI 175 °C

Creepage distance standard DIP-4 7 mm

Clearance distance standard DIP-4 7 mm

Creepage distance 400 mil DIP-4 8 mm

Clearance distance 400 mil DIP-4 8 mm

Insulation thickness,

reinforced rated per IEC 60950 2.10.5.1 0.4 mm

isfh610a_01

R = 75 Ω

VCC =5V

47 Ω

103

102

101

- 25 7525050

TA (°C)

isfh610a_03

IF = 10 mA, VCC = 5.0 V

isfh610a_02

1. 0 k Ω

VCC =5V

47 Ω

015105V

isfh610a_04

= 14 mA

= 12 mA

= 10 mA

= 6 mA

= 8 mA

= 4 mA

= 2 mAI

= 1 mA

www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83666

612 Rev. 2.0, 10-Dec-08

SFH610A, SFH6106

Vishay Semiconductors Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

Fig. 5 - Diode Forward Voltage vs. Forward Current

Fig. 6 - Transistor Capacitance (Typ.) vs. Collector Emitter Voltage

Fig. 7 - Permissible Pulse Handling Capability Forward Current vs.

Pulse Width

Fig. 8 - Permissible Power Dissipation vs. Temperature

Fig. 9 - Permissible Diode Forward Current vs.

Ambient Temperature

1.2

1.1

1.0

0.9

-1

5 mA5510

isfh610a_05

VF = f (IF)

25 °C

50 °C

75 °C

10-2 10-1 100101102

isfh610a_06

f = 1.0 MHz

CCE

101

102

103

104

10-5 10-4 10-3 10-2 10-1 100101

isfh610a_07

D =

D = 0

0.005

0.01

0.02 Pulse cycle

D = parameter

0.05

0.1

0.2

0.5

120

0 50 1007525 °C

isfh610a_08

Ptot = f (TA)

100

150

200

0 50 1007525 °C

tot

isfh610a_09

Transistor

Diode

Document Number: 83666 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 2.0, 10-Dec-08 613

SFH610A, SFH6106

Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

Vishay Semiconductors

PACKAGE DIMENSIONS in inches (millimeters)

0.029 (0.74)

0.095 (2.41)

0.048(1.22) 0.012 (0.30)

0.110 (2.79)

Pin 1 identification

0.296 (7.52)

i178027-1

0.255 (6.48)

0.268(6.81)

0.179 (4.55)

0.190 (4.83)

0.030 (0.76)

0.045 (1.14)

4°

typ .

0.105 (2.67)

0.130 (3.30)

0.150 (3.81)

0.020 (0.51)

0.035 (0.89)

10 °

3° to 9°

0.052 (1.32)

0.008(0.20)

0.033 (0.84)

0.130 (3.30)

0.250 (6.35)

0.230 (5.84)

IS OM ethod A

0.312 (7.92)

i17802 9-2

0.255 (6.48)

0.268(6.81)

0.179 (4.55)

0.190 (4.83)

0.030 (0.76)

0.045 (1.14)

4° typ.

0.052 (1.32)

10 °

Lead coplanarity

0.004 (0.102) max. (’K’)

SMD

ISO methodA

0.100 (2.54) R 0.010 (0.25)

0.070 (1.78)

0.030 (0.76)

0.315 (8.00) mi n. 0.060 (1.52)

0.435 (11.05)

0.048(1.22) 0.105 (2.67)

0.095 (2.41)

0.033 (0.84)

0.029 (0.74)

0.150 (3.81)

0.130 (3.30)

0.0098(0.249)

0.004 (0.102)

0.012 (0.30)

0.008(0.20)

0.296 (7.52)

0.395 (10.03)

0.375 (9.52)

PIN 1 IDENTIFICATION

0.312 (7.92)

www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83666

614 Rev. 2.0, 10-Dec-08

SFH610A, SFH6106

Vishay Semiconductors Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

0.014 (0.35)

0.010 (0.25)

0.400 (10.16)

0.430 (10.92)

0.307 (7.8)

0.291 (7.4)

0.407 (10.36)

0.391 (9.96)

Option 6

0.315 (8.0)

min.

0.300 (7.62)

typ.

0.180 (4.6)

0.160 (4.1)

0.331 (8.4)

min.

0.406 (10.3)

max.

0.028 (0.7)

Option 7

18487

0.300 (7.62)

typ.

0.150 (3.81)

0.130 (3.30)

0.472 (12.00)

max.

0.365 (9.27)

min.

0.020 (0.50)

0.000 (0.00)

Option 8

Document Number: 83666 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com

Rev. 2.0, 10-Dec-08 615

SFH610A, SFH6106

Optocoupler, Phototransistor Output,

High Reliability, 5300 VRMS

Vishay Semiconductors

OZONE DEPLETING SUBSTANCES POLICY STATEMENT

It is the policy of Vishay Semiconductor GmbH to

1. Meet all present and future national and international statutory requirements.

2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with

respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.

It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone

depleting substances (ODSs).

The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use

within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.

Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in

the following documents.

1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.

2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency

(EPA) in the USA.

3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.

Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do

not contain such substances.

We reserve the right to make changes to improve technical design

and may do so without further notice.

Parameters can vary in different applications. All operating parameters must be validated for each customer application by the

customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall

indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any

claim of personal damage, injury or death associated with such unintended or unauthorized use.

Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.