0.450.45
0.45 0.4
0.25 0.25
0.4
0.4
Feeding direction
φ1.5
1.62
8.0±0.2
3.5±0.05
1.12
2.0±0.05
4.0±0.1
1.75±0.1
+0.1
0
φ13
11.4±1
φ60 0
+1
φ180 0
-3
Directivity (Typ.)
0 50 10050100
0
30
60
90
30
60
90
Green, Red
Absolute Maximum Ratings (Ta=25°C) Dimensions (Unit:mm)
0 50 10050100
RedGreen 0
30
60
90
30
60
90
(Unit:mm)
YX
Y’X’
The recommended thickness of the screen mask
for soldering is between 80 and 130µm. The hole
size of the screen mask should be same as the
recommended land pattern or smaller.
Packaging Specifications (Unit:mm)
Recommended Pad Layout
Tape Specifications:1 <5,000pcs/reel>
SMLP36 Series (under development) PICOLEDTM -RGB
Reel Specifications
Tri-Color Top View
0604 <1.5 1.0 t=0.2mm> High Brightness Type
Electrical Optical Characteristics (Ta=25°C)
Part No.
Forward
voltage
VF
Light wavelength
Reverse
current
IR
Brightness
IV
IF
(mA)
Typ.
(V)
Typ.
(mcd)
Typ.
(nm)
λD∗3
Min.
(mcd)
IF
(mA)
IF
(mA)
Max.
(µA)
Resin Color
Peak
forward
current
IFP
(mA)∗2
Part No.
Power
dissipation
PD
(mW)
Forward
current
IF
(mA)∗1
Reverse
voltage
VR
(V)
Operating
temperature
Topr
(°C)
Storage
temperature
Tstg
(°C)
Emitting
color
VR
(V)
Dominant
Blue
Green
Red
SMLP36 64 20 100 5 -30 to +85 -40 to +100
3.0
(3.2)
3.1
(3.3)
1.9
(2.2)
5
(20) 100 5
470
527
624
5
9.0
(28)
36
(110)
14
(56)
18
(50)
71
(200)
28
(100)
5
(20)
SMLP36 Milkey
White
1:The above absolute maximum ratings are valid for the case of lighting a single color. When lighting two colors at
the same time, each of the figures in the absolute maximum ratings should be reduced down to 50% of it. When
lighting three colors, it will be reduced down to 30% of it. (DC drive)
2:Conditions of IFP : Pulse width 1ms Duty 1/120
3:Measurement tolerance : ±2nm
Tolerance:±0.2
Tolerance:±0.2
Green
Red
Green
Red
Emitting Color
Material
Package Size(mm)
Blue Green Red
SMLP36RGB1W
1510(0604) 1.5×1.0(t=0.2)
Part No. InGaN on SiC AlGalnP on GaAs
RELATIVE LUMINOUS INTENSITY (%)
Angular Displacement (deg)
Angular Displacement (deg)
RELATIVE LUMINOUS INTENSITY (%)
In preparation
In preparation
Tolerance:±0.1
0.6
0.08
1.0
R
BG
1.5
1.42
0.9
0.4
0.92
0.4
R
BG
Cathode
Anode
0.2+0.05
-0.02
Target Spec.
4.0±0.05
1.12±0.05
0.20±0.08
3°MAX
0.28±0.05
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
Appendix1-Rev2.0
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co.jp
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix
