APE8800A-15TY5P-HF - Advanced Power Electronics Corp. USA

Advanced Power

Electronics Corp.

300mA LOW DROPOUT LINEAR REGULATOR WITH SHUTDOWN

FEATURES DESCRIPTIOON

Low Dropout Voltage of 250mV at 300mA

Guaranteed 300mA Output Current

Very Low Quiescent Current at 30µA

±2% Output Voltage Accuracy

Needs Only 1µF Capacitor for Stability

Thermal Shutdown Protection

Current Limit Protection

Active Low Shutdown Control

Low-ESR Ceramic Capacitor for Output Stability.

Tiny Package: SOT-23-5L & TSOT-23-5L

RoHS Compliant & Halogen Free

APPLICATION

DSC

Wireless Devices

LCD Modules

Battery Power Systems

Card Readers

PDA

ORDERING / PACKAGE INFORMATION

Data and specifications subject to change without notice

20110615F

APE8800A

TYPICAL APPLICATIO

The APE8800A is a low dropout, positive linear

regulator with very low quiescent current. The APE8800A

can supply 300mA output current with low dropout voltage

at about 250mV. The BP pin with a 10nF bypass capacitor

can help reduce the output noise level. The shutdown

function can provide remote control for the external signal to

decide the on/off state of APE8800A. With a logic high level

at SHDN pin, the device is in the on state, and vice versa.

The APE8800A regulator is able to operate with output

capacitors as small as 1µF for stability. Other than the

current limit protection, APE8800A also offers the on chip

thermal shutdown feature providing protection against

overload or any condition when the ambient temperature

exceeds the maximum junction temperature.

The APE8800A offers high precision output voltage of

+2%. It is available in fixed output voltages including 1.2V,

1.5V, 1.8V, 2.5V, 2.8V, 3.0V, 3.1V, 3.3V, 3.6V, 4.5V and

5.0V. The APE8800A is housed in low-profile, space-saving

SOT-23-5L & TSOT-23-5L package.

Note：To prevent oscillation, it is recommended to use minimum 1µF X7R or X5R dielectric capacitors if

ceramics are used as input/output capacitors.

Figure 1. Typical Application Circuit of APE8800A

(Top View)

SOT-23-5L (Y5)

TSOT-23-5L (TY5)

VIN

GND

SHDN BP

VOUT

APE8800A - X X X -HF

Packag e TypeOutput Voltage

Y5 : SOT-23-5L

TY5 : T SO T- 2 3-5L

P: Pb Free with Commercial

Standard (RoHS Compliant)

12 : 1.2V

15 : 1.5V

18 : 1.8V

25 : 2.5V

28 : 2.8V

30 : 3.0V

31 : 3.1V

33 : 3.3V

36 : 3.6V

45 : 4.5V

50 : 5.0V

Halogen Free

Advanced Power

Electronics Corp. APE8800

ABSOLUTE MAXIMUM RATINGS

Input Voltage (VIN) ----------------------------------------

Power Dissipation -----------------------------------------

0.4W

Storage Temperature Range (Tstg) --------------------

-65°C To 150°C

Maximum Junction Temperature (TJ) ----------------- 150°C

Lead Temperature (Soldering, 10sec, TLEAD) ------

260°C

Thermal Resistance Junction to Ambient (Rthja) 250oC/W

Note：Stresses beyond those listed under “Absolute Maximum Ratings" may cause permanent damage to the device.

RECOMMENDED OPERATING CONDITIONS

Input Voltage (VIN) ----------------------------------------

2.8 to 5.5V

Operating Junction Temperature Range (TJ) ------

-40 to 125oC

Ambient Temperature (TA) -----------------------------

-40 to 85oC

ELECTRICAL SPECIFICATIONS

( VIN=VOUT+1V or VIN=2.8V whichever is greater, SHDN pin connected to VIN , CIN=1µF, COUT=1µF, TA=25 ºC,

unless otherwise specified)

Parameter SYM TEST CONDITION MIN TYP MAX UNITS

Output Voltage Accuracy ∆VOUT IO=1mA -2 - 2 %

Current Limit ILIMIT RLoad=1Ω300 - - mA

Quiescent Current IQ

IO= 0mA - 30 55 µA

Standby Current ISTBY

VIN=2.8 ~ 5V, Output Off - - 1.5 µA

1.2V ≦ VOUT ≦ 2.0V - 1100 -

2.0V < VOUT ≦ 2.8V - 350 -

2.8V < VOUT ≦ 4.5V - 250 -

Line Regulation ∆VLINE IO=1mA, VIN=VOUT +1V or 5V - 1 5 mV

Load Regulation (Note 2) ∆VLOAD IO=0mA to 300mA - 6 20 mV

VIN=VOUT+1V

COUT=1uF, fRIPPLE = 120Hz

Output Noise ∆nC

BP=10nF, f=1KHz, VIN=5V - 0.4 - uV/√Hz

Temperature Coefficient TC IOUT = 1mA, VIN = 5V - 50 - ppm/ oC

Thermal Shutdown Temperature TSD - 160 - oC

Thermal Shutdown Hysteresis ∆TSD - 25 - oC

Shutdown Pin Current ISHDN - - 0.1 µA

Noise Bypass Terminal Voltage VREF - 1.2 - V

Shutdown Pin Voltage (ON) VSHDN (ON) 1.4 - - V

Shutdown Pin Voltage (OFF) VSHDN (OFF) - - 0.4 V

Shutdown Exit Delay Time ∆TC

BP=10nF, COUT=1uF, IO=30mA - 300 - µs

Note 1：The dropout voltage is defined as VIN-VOUT, which is measured when VOUT drop about 100mV.

Note 2：Regulation is measured at a constant junction temperature by using 40ms current pulse and load regulation in the load range from

0mA to 300mA.

60 -

Dropout Voltage (Note 1) VDROP mV

dBPSRR Ripple Rejection -

IO=300mA

Advanced Power

Electronics Corp.

PIN DESCRIPTIONS

PIN SYMBOL

Power is supplied to this device from this pin which is required an input filter capacitor. In general, the input

capacitor in the range of 1µF to 10µF is sufficient.

The output supplies power to loads. The output capacitor is required to prevent output voltage from oscillation.

The APE8800A is stable with an output capacitor 1µF or greater. The larger output capacitor will be required for

application with larger load transients. The large output capacitor could reduce output noise, improve stability,

and PSRR.

GND

SHDN

VOUT

APE8800A

BLOCK DIAGRAM

VIN

Chip Enable (Active High)

PIN DESCRIPTION

Common ground pin

Reference Noise Bypass , the Bypass Capacitor > 1nF

Figure 2. Block Diagram of APE8800A

Advanced Power

Electronics Corp.

APPLICATION INFORMATI

Output & Input Capacitor

Protection Features

Thermal Consideration

Shutdown Operation

APE8800A

The APE8800A is a low dropout linear regulator that could provide 300mA output current at

dropout voltage about 250mV. Current limit and on chip thermal shutdown features provide

protection against any combination of overload or ambient temperature that could exceed maximum

junction temperature

The APE8800A regulator is designed to be stable with a wide range of output capacitors. The

ESR of the output capacitor affects stability. Larger value of the output capacitor decreases the

peak deviations and improves transient response for larger current changes.

The capacitor types (aluminum, ceramic, and tantalum) have different characterizations such

as temperature and voltage coefficients. All ceramic capacitors are manufactured with a variety of

dielectrics, each with different behavior across temperature and applications. Common dielectrics

used are X5R, X7R and Y5V. It is recommended to use 1uF to 10uF X5R or X7R dielectric ceramic

capacitors with 30mΩ to 50mΩ ESR range between device outputs and ground for stability. The

APE8800A is designed to be stable with low ESR ceramic capacitors and higher values of

capacitors and ESR could improve output stability. The ESR of output capacitor is very important

because it generates a zero to provide phase lead for loop stability.

There are no requirements for the ESR on the input capacitor, but its voltage and temperature

coefficient have to be considered for device application environment.

In order to prevent overloading or thermal condition from damaging the device, APE8800A has

internal thermal and current limiting functions designed to protect the device. It will rapidly shut off

PMOS pass element during overloading or over temperature condition.

The power handling capability of the device will be limited by maximum operation junction

temperature. The power dissipated by the device will be estimated by PD = IOUT x (VIN-VOUT). The

power dissipation should be lower than the maximum power dissipation listed in “Absolute Maximum

Ratings” section.

The APE8800A is shutdown by pulling the SHDN input low, and turned on by driving the SHDN

high. If this function is not used, the SHDN input should be tied to VIN to keep the regulator on at all

times (the SHDN must not be left floating).

Advanced Power

Electronics Corp. APE8800A

TYPICAL PERFORMANCE CHARACTERISTICS

Quiescent Current vs. Input Voltage Current Limit vs. Input Voltage

Current Limit vs. Temperature Quiescent Current vs. Temperature

Dropout Voltage vs. Temperature Output Voltage vs. Temperature

Advanced Power

Electronics Corp. APE8800A

TYPICAL PERFORMANCE CHARACTERISTICS

(VIN=5V, IOUT=150mA, CIN=1uF, COUT=1uF )

(VIN=4~5V IOUT=10mA CIN=1uF COUT=1uF ) (VIN=5V IOUT=1mA CIN=1uF COUT=1uF )

Shutdown Function Load Transient Response

Line Transient Response Shutdown Exit Delay Time

Advanced Power

Electronics Corp. APE8800A

MARKING INFORMATION

SOT-23-5L / TSOT-23-5L

F&SSS

Part Number : F& (see Identification code)

Date Code : SSS

Output Voltage Identification Code Output Voltage Identification Code

1.2V Fa 3.1V Fx

1.5V Fc 3.3V Fh

1.8V Fb 3.6V Fw

2.5V Fd 4.5V FM

2.8V Fe 5.0V Fv

3.0V Ff