P3 @ @@ @|@ @|@ 1 ELECTRICAL SPECIFICATIONS: 1.0 TURNS RATIO P6-P8-P3) 1 J6-J3) (P2-P7-P1> + (J2-Ji> 2.0 INDUCTANCE P6-P3)=J6-J3) (Pe-P1) 3.0 LEAKAGE INDUCTANCE P6-P3 (WITH J6 AND J3 SHORT) P2-P1 <WITH J2 AND J1 SHORT) 4.0 INTERWINDING CAPACITANCE (P6,P3> TO (J6,J3) (Pe,P1) TO (J2,JD 3.0 DC RESISTANCE (J6-J30=(J2-J1D P6-P8)=(P8-P3) <P2-P7)=(P7-P1) 6.0 DIELECTRIC WITHSTAND <P6,P3>) TO (J6,J3) cP2,PL) TO <J2,JD : 10T +e + NOTES 1cT 11+ 3% 1.0 PINS WITHOUT ELECTRICAL 3% CONNECTION ARE OMITTED, | 98uUH MIN, @ 0.01V , 10KHz 2.0 Ref. MG06 18uH MIN. @ 0.01V, 10KHz + 0,.3uH MAX. @ 1MHz 0,08uH MAX, @ IMHz i 8pf MAX @ 1IMHz 6pf MAX, @ 1MHz 0.7 ohms Max, ' 0.3 ohms Max. + 0.3 ohms Max, 1500VAC | 500VAC Bel Stewart Connector MlagJack Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING, OF BEL STEWART CONNECTOR. SHEET 1 OF 3 DRAWING NO. SI-40065|" 12*WITH A FORWARD CURRENT OF 20 mA (TYP) THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT 050 [1.27] | z {.635 [16.13]) MAX| 1 t 050 [1.27] (7) B _ Leet SLD 080 [2.03] 530 [1346--| 9 S_ 9.035 +.003 [0.89 +0.08] (8) | | 3 rr Maguack -$]B.006] (sional) Php--9--P--9- a PART NUMBER pd PIN #f S cnRY Yan ee = 9.062 +.003 rote 8 57 +0.08] (2) op -p- i Bel Stewart 8 [-6[.006 SHIELD) & p= -450 [11.43] 1e te N = An | = J WY tf 128 [3.25] GRNGRN (POSTS) -~~=. (2) 2 y 125 [3.18] 7 tae va = 9.040 +.003 [1.02 0.08] (4) G.006 8 ; (.708 [17.98]] x, %.006 |(LEDS) ~ (148 [3.75] ) 5 036 [0.91] 100 [2.54] (2) HIGHEST FONT 2 _ 086 = [9.80] N PIN JIN rh i P.C.B, RECOMMENDED HOLE LAYOUT | fp 2 SEEN FROM COMPONENT SIDE = s. =| = a = ALL CENTERLINE DIMENSIONS ARE BASIC. 23 = 5 q cE LED ys eS t 5 _e GREEN/ |B Io YELLOW [Mf | ! | a _| (gest pant | | .040 [1.02 q 450 [11.43] Hest AO 495 [10.79] [1.02] NOTES: 1. CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V-0 CONTACT/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN GRN CONTACT PLATING: SELECTIVE GOLD, 50 MICRO-INCHES MIN. IN CONTACT AREA. 2. PIN NOT ELECTRICALLY CONNECTED MAYBE OMITTED. YEL SEE ELECTRICAL DRAWING FOR OMITTED PINS. 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. TYP. LED POLARITY 4, ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] [ED SPECIFICATION 5. WAVE SOLDER COMPATIBLE PREHEAT 125'C/90SECS. STANDARD LED | WAVELENGTH | FORWARD V (MAX) | * (TYP) GREEN 565 nm 25V| 22V YELLOW 590 nm 25VvV| 21V Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com OF BEL STEWART CONNECTOR, THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. SHEET DRAWING NO. 2 OF 3 SI-40065]" 06= .656 woo \ 554 [14.07] SUGGESTED PANEL OPENING L000 [0.00] (TOP OF PCB TO BOTTOM OF OPENING) 010 [0.25] MAX. RADIUS(4) POINT OF CONTACT WITH PANEL > 080 [2.03] ES _ re 275 [6.98] MAX. 1. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE THE USER THE ABILITY TO HAVE REASONABLE JACK / PANEL CLEARANCES YET MAINTAIN RELIABLE GROUNDING CAPABILITY. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] Bel Stewart Connector MagJack 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT) SHEET DRAWING NO. S|40065 O 5 OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 3 OF 3