FUJITSU SEMICONDUCTOR Ds04-23118-1E m@ DESCRIPTION The F5CE-D2 series of SAW bandpass filters apply to the frequency rang it possible to provide high stopband attenuation and excellent pass Mode SAW) technology as design method. Moreover, these filters contributes to reduce weight and size of mobile communicati The F5CE-D2 series of SAW filters are suitable for inters frequency range 700 to 1000 MHz. Standard devices a ISM900. O MHz. These filters make 6 to using unique DMS (Double small 3.0 mmsq. package. This mobile communication systems in the MPS/CDMA/TDMA, GSM, PDC800 and m@ FEATURES * Excellent stopband attenuation + Low insertion loss and low passband rippl * Ultra compact and light package ( * External matching circuits are not * Surface mount package (SM * Standard devices are avai (AMPS/CDMA/TDMA, G& m@ PACKAGEF5CE Series (D2 type) m@ PIN ASSIGNMENT (BOTTOM VIEW) 6 5 4 @ PIN DESCRIPTION Pin no. Pin name Description 1 GND Ground Pin 2 IN Input Pin 3 GND Ground Pin 4 GND Ground Pin 5 OUT Output Pin 6 GND Ground Pin m@ ABSOLUTE MAXIMUM RATINGS Rating Parameter Symbol - Unit Min. Max. Operating temperature Ta 30 +85 C Storage temperature Tstg 40 +100 C Input power Pin - +15 dBm Input DC voltage DC 5 +5 Vv WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, power, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.F5CE Series (D2 type) m@ RECOMMENDED OPERATING CONDITION Value Parameter Symbol - Unit Min. Max. Operating temperature Ta 30 +85 C WARNING: Recommended operating conditions are normal operating ranges for the piezoelectric device. All the devices electrical characteristics are warranted when operated within these ranges. Always use piezoelectric devices within the recommended operating conditions. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representative beforehand. @ STANDARD FREQUENCIES System Cernig) (MHz) symbol Part number Remarks TX 950.0 20 30 FAR-F5CE-950M00-D230 PDC800 Rx 820.0 20 31 FAR-F5CE-820M00-D231 AMPS TX 836.5 25 32 FAR-F5CE-836M50-D232 /CDMA /TDMA Rx 881.5 25 33 FAR-F5CE-881M50-D233 TX 902.5 25 34 FAR-F5CE-902M50-D234 GSM/NMT Rx 947.5 25 35 FAR-F5CE-947M50-D235 ISM900 _ 915.0 7 38 FAR-F5CE-915M00-D238F5CE Series (D2 type) m@ ELECTRICAL CHARACTERISTICS 1. PDC800 (Tx) Part number: FAR-F5CE-950M00-D230 (Ta = 30 to +85C) Parameter Symbol Conditions Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 940 to 960 MHz 2.6 3.0 dB Inband ripple _ 940 to 960 MHz _ 0.7 1.2 dB DC to 680 MHz 50 66 dB 680 to 696 MHz 50 69 dB Absolute 810 to 830 MHz 50 66 dB attenuation 1015 to 1106 MHz 35 42 | oB 1106 to 1700 MHz 50 59 dB 1700 to 2000 MHz 40 59 dB Inband VSWR 940 to 960 MHz 1.8 2.0 2. PDC800 (Rx) Part number: FAR-F5CE-820M00-D231 (Ta = 30 to +85C) Parameter Symbol Conditions Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 810 to 830 MHz 2.5 3.0 dB Inband ripple _ 810 to 830 MHz _ 0.7 1.2 dB DC to 760 MHz 50 65 dB 855 to 875 MHz 28 30 dB a eee in 875 to 920 MHz 35 | 38 | | dB 920 to 1200 MHz 45 60 dB 1200 to 2000 MHz 40 47 dB Inband VSWR 810 to 830 MHz 1.7 2.0 3. AMPS/CDMA/TDMA (Tx) Part number: FAR-F5CE-836M50-D232 F5CE Series (D2 type) (Ta = 30 to +85C) Parameter Symbol Conditions Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 824 to 849 MHz 2.7 3.5 dB Inband ripple _ 824 to 849 MHz _ 0.9 1.6 dB DC to 800 MHz 50 66 dB Absolute 869 to 1049 MHz 28 33 dB attenuation 1049 to 1200 MHz 50 60 | dB 1200 to 2000 MHz 45 50 dB Inband VSWR 824 to 849 MHz 1.8 2.0 4. AMPS/CDMA/TDMA (Rx) Part number: FAR-F5CE-881M50-D233 (Ta = 30 to +85C) Parameter Symbol Conditions Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 869 to 894 MHz 2.7 3.5 dB Inband ripple _ 869 to 894 MHz _ 0.9 1.6 dB DC to 779 MHz 50 63 dB 779 to 849 MHz 45 50 dB ae on = 914 to 970 MHz 238 | 33 | | aB 970 to 1049 MHz 50 60 dB 1049 to 2000 MHz 40 50 dB Inband VSWR 869 to 894 MHz 1.7 2.0 F5CE Series (D2 type) 5. GSM/NMT (Tx) Part number: FAR-F5CE-902M50-D234 (Ta = 30 to +85C) Parameter Symbol Conditions Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 890 to 915 MHz 2.8 3.3 dB Inband ripple _ 890 to 915 MHz _ 0.8 1.4 dB DC to 845 MHz 50 60 dB 845 to 870 MHz 45 50 dB Absolute 925 to 935 MHz 5 18 dB attenuation 935 to 980 MHz 28 33 | oB 980 to 1200 MHz 50 60 dB 1200 to 3000 MHz 30 40 dB Inband VSWR 890 to 915 MHz 1.7 2.1 6. GSM/NMT (Rx) Part number: FAR-F5CE-947M50-D235 (Ta = 30 to +85C) Parameter Symbol Conditions Value Unit Remarks Min. | Typ. | Max. Insertion loss IL 935 to 960 MHz 2.7 3.3 dB Inband ripple _ 935 to 960 MHz _ 0.7 1.4 dB DC to 871 MHz 50 66 dB 890 to 915 MHz 30 40 dB a eee in 980 to 1025 MHz 25 | 34 | | GB 1025 to 2000 MHz 45 48 dB 2000 to 3000 MHz 30 33 dB Inband VSWR 935 to 960 MHz 1.9 2.1 7. ISM900 (7 MHz Bandwidth) Part number: FAR-F5CE-915M00-D238 F5CE Series (D2 type) (Ta = 30 to +85C) Value Parameter Symbol Conditions - Unit Remarks Min. | Typ. | Max. Insertion loss IL 911.5 to 918.5 MHz 3.2 3.5 dB Inband ripple _ 911.5 to 918.5 MHz _ 0.3 1.0 dB _ DC to 600 MHz 50 66 _ dB _ 600 to 840 MHz 40 35 _ dB Absolute 869 to 894 MHz 35 | 40 | | aB attenuation _ 970 to 1500 MHz 40 45 _ dB _ 1500 to 3000 MHz 25 28 _ dB Inband VSWR _ 911.5 to 918.5 MHz _ 1.8 2.0 _F5CE Series (D2 type) @ TYPICAL CHARACTERISTICS (STANDARD VERSION) 1. PDC800 (Tx) Part number: FAR-F5CE-950M00-D230 CH1 $21 MAG 10 dB/ 4 REF OdB 1:-2.568 dB .940 000 000 G 2:-2.342 dB 0.9600 G :-68.839 dB 0.8100G :-89.73 dB 1.0150G CENTER 0.950 000 000 GHz CH1 S SWR 1_/ REF1 21.2585 .940 000 000 G C2 2: 1.4082 Dot 0.9600 G 3: 58.55 0.8100 G 4: 15.631 Hid 1.0150G CENTER 0.950 000 000 GHz SPAN 0.300 000 000 GHz SPAN 0.300 000 000 GHz CH1 C2 Dot H1d CH1 C2 Dot H1d $11 1UFS 41: 52.076 Q -11.529Q 14.686 pF 0.940 000 000 GHz 2: 66.398 Q -11.027 9 0.9600 GHz 3: 2.0508 Q ~~ S -57.342.2 ~, 0.8100 GHz __ 4:12.441 ~~ 84.324 0 1.0150 GHz CENTER 0.950 000 000 GHz 3 SPAN 0.300 000 000 GHz $22 1UFS 1:51.6992 112090 15.105pF 0.940 000 000 GHz 2: 64.738 Q -8.7813 0.9600 GHz 3:237110 SY 56.83 2 ., 0.8100 GHz _ 4: 18.398 2 ~~ 84.547 O 1.0150 GHz CENTER 0.950 000 000 GHz 3 SPAN 0.300 000 000 GHz2. PDC800 (Rx) Part number: FAR-F5CE-820M00-D231 F5CE Series (D2 type) 10dB/ REF OdB 1:-2.451 dB .810 000 000 GHz 2:-2109 dB Ce 0.8300 GHz Dot :-63.906 dB 0.7600 GHz :-31.312 dB 1.0150 GHz 5 : -39.558 dB 1.0150 G CH1 S21 logMAG H1d CENTER 0.820 000 000 GHz SPAN 0.300 000 000 GHz CH1 S11. SWR 1 / REF1 1: 1.1981 810 000 000 G C2 2: 1.3628 Dot 0.8300 G 3: 28.125 0.7600 GHz, 4: 21.387 Hid 0.8550 GHz 5: 21.387 0 GHz > CENTER 0.820 000 000 GHz SPAN 0.300 000 000 GHz CH1 C2 Dot H1d CH1 C2 Dot H1d Si1 1UFS 41:4199 0.4043 2 79.439 pF 0.810 000 000 GHz 2:67.109Q -5.3945 O 0.8300 GHz 3: 3.49220 Lee che -49.041 Q ~ x -~ 4 >> N0.7800 GHz \M: 17.785 Q S~_ -127.420 (oN 0.8550 GHz : 15.2772 100.98 Q 0.8750 GHz 3h CENTER 0.820 000 000 GHz SPAN 0.300 000 000 GHz $22 1UFS 1:37.752Q2 -4.1523Q 47.32 pF 0.810 000 000 GHz 2: 65.793 Q 4.418 0.8300 GHz 3: 3.6797 \ 43.031 2 ~s'8 0.7600 GHz 4: 18.2190 ~~ -120.1 Q 0.8550 GHz 5: 15.129 Q 93.582 Q 0.8750 GHz 3 CENTER 0.820 000 000 GHz SPAN 0.300 000 000 GHz10 F5CE Series (D2 type) 3. AMPS/CDMA/TDMA (Tx) Pa rt number: FAR-F5CE-836M50-D232 Cor Dot H1d CH1 Cor Dot H1d CH1 S21 MAG 10 dB/_ 1REF 0 dB :-2.643 dB 824.000 000 MHz 2:-2.7135 dB 849 MHz :-60.88 dB 800 MHz : 34.243 dB MHz CENTER 835.000 000 MHz SPAN 300.000 000 MHz S11. SWR 1 / REF1 21.2555 824.000 000 M 2: 1.7589 849 M : 33.646 800 MHz : 34.335 869 MHz > CENTER 835.000 000 MHz SPAN 300. 000 000 GHz CH1 S11 1UFS Cor Dot H1d CENTER 835.000 000 MHz CH1 S22 1UFS 1: 40.059 Q Cor Dot H1d CENTER 835.000 000 MHz 1:39.861 0.0938 Q 2.375 Q 18.108 pF 824.00 000 MHz 2: 84.996 Q -12.77 Q 849 MHz 3: 2.01562 29.858 800 MHz _ 4: 18.081 -140.37 2 869 MHz SPAN 300.000 000 MHz 458.73 pF 824.000 000 MHz 2: 84.5472 -10.078 Q 849 MHz 3:2.1123.Q -88.005 Q 800 MHz __ | 4:12.7732 ~~~ 134.220 869 MHz SPAN 300.000 000 MHz4. AMPS/CDMA/TDMA (Rx) Part number: FAR-F5CE-881M50-D233 F5CE Series (D2 type) CH1 S$ MAG 10dB/ 1REFOdB :-2.6219 dB 869.000 000 M :-2.7063 d 894M Cor Dof : 62.398 d 849 M :-33.178 d 914M H1d CENTER 880.000 000 MHz SPAN 300.000 000 MHz CH1 S$ SWR 1 / REF1 : 1.0512 869.000 000 M 2: 1.8203 Cor 894M Dot : 26.584 849 M : 31.784 914M H1d CENTER 880.000 000 MHz SPAN 300. 000 000 GHz CH1 S11 1UFS Cor Dot H1d 1: 48.748 Q 1.71092 107.05 pF 869.00 000 MHz 2: 89.652 Q -9.0273 Q 894 MHz 3: 2.2881 -23.078 Q 849 MHz _ +4: 16.703 Q -149.05 Q 914 MHz CENTER 880.000 000 MHz CH1 S22 1UFS Cor Dot H1d 1: 48.572 O SPAN 300.000 000 MHz -660.16m2 277.43 pF 869.000 000 MHz 2: 88.297 Q ~7.6133 Q 894 MHz 3: 2.3965 2 -21.153 S849 MHz 14: 14.922 ~~ 139.78 Q 914 MHz CENTER 880.000 000 MHz SPAN 300.000 000 MHz 1412 F5CE Series (D2 type) 5. GSM/NMT (Tx) Part number: FAR-F5CE-902M50-D234 CH1 S21 MAG 10 dB/ 4 REF OdB 1:-2.705 dB "890 000 000 G 2:-2512 d 0.9150 G :-60.125 d 0.8690 G : 32.472 d 0.9350 G :-63.11 d 0.9800 G CENTER 0.900 000 000 GHz SPAN 0.300 000 000 GHz CH1 S11. SWR 1 / REF14 1: 1.1118 890 000 000 G C2 2: 1.5029 Dot 0.9150G 3: 25.029 0.8690 G 4: 32.898 Hid 0.9350 GHz 5: 15.535 0 GHz CENTER 0.900 000 000 GHz SPAN 0.300 000 000 GHz CH1 C2 Dot H1d CH1 C2 Dot H1d 1: 54.355 O S11 1UFS -3.28132 54.499 pF 0.890 000 000 GHz 2: 73.234 0 -8.75 0 0.9150 GHz 3:2377 NV -21.645 ~\ 0.8690 GHz 4: 16.1410 ~ 154.23 0.9850 GHz 5: 9.9835 O -71.762 0 CENTER 0.900 000 000 GHz SPAN 0.300 000 000 GHz $22 1UFS 1:5416Q2 -238670 74.925 pF 0.890 000 000 GHz 2: 72.748 Q -8.6719 Q 0.9150 GHz 3: 2.3945 Q *\"-20.338 Q ~s 0.8690 GHz 4: 14.7810 ~-143.07 Q 0.9350 GHz 5: 9.7883 Q 88.281 0,9800 GHz qf CENTER 0.900 000 000 GHz SPAN 0.300 000 000 GHz6. GSM/NMT (Rx) Part number: FAR-F5CE-947M50-D235 F5CE Series (D2 type) CH1 S21 MAG 10 dB/ 4 REF OdB :-2.838 dB 0.935 000 000 G 2:-2811 d ce 0.9600 G : 43.265 d Dot 0.9150G :-81.174d 0.9800 G 5: 62.902 d Hid ~ 4.0250 G CENTER 0.950 000 000 GHz SPAN 0.300 000 000 GHz CH1 S11 SWR 1 / REF1 21.2585 .935 000 000 G C2 2:1.8212 Dot 0.9600 G 3: 16.035 0.9150G : 33.99 Hid 0.9800 G 5: 16.709 1. G CENTER 0.950 000 000 GHz SPAN 0.300 000 000 GHz $11 1UFS 1:48.096Q -11.426Q 14.898 pF 0.935 000 000 GHz 2: 87.0122 -15.473 Q 0.9600 GHz 3: 3.31542 o\ -11.9772 . 0.9150 GHz _ 4:12.32 Q -135.31 2 0.9800 GHz 5: 8.1797 Q 65.523 1.0250 GHz WJ CENTER 0.950 000 000 GHz SPAN 0.300 000 000 GHz $22 1UFS 14:46922Q -11.1992 15.199 pF 0.935 000 000 GHz 2 : 86.348 .Q -15.438 Q 0.9600 GHz 3:3.269 Q \ -11.102 Q ~s 0.9150 GHz 4:12.32 Q ~~ 433.48 0.9800 GHz 5 : 8.2369 Q -63.543 Q . 0.0250 GHz 4 CENTER 0.950 000 000 GHz SPAN 0.300 000 000 GHz 1314 F5CE Series (D2 type) 7. ISM900 (7 MHz Bandwidth) Part number: FAR-F5CE-915M00-D238 CH1 C2 Dot H1d CH1 C2 Dot H1d $21 MAG 10 dB/ REF 0 dB 1:-3.133 dB 912 500 000 G 2:-3.011 d 0.9205 G CENTER 0.915 000 000 GHz SPAN 0.300 000 000 GHz Ss SWR 1_/_ REF14 11.2879 912 500 000 G 2: 1.6094 0.9205 G CENTER 0.915 000 000 GHz SPAN 0.300 000 000 GHz CH1 S11 1UFS 1:50.824Q 12.7562 2.2248 pF 7 0.912 500 000 GHz \ 2:77.8442 112 ce 0.9205 GHz Dot H1d CENTER 0.915 000 000 GHz SPAN 0.300 000 000 GHz CH1 S22 1UFS 1:50.184Q 13.977Q 2.4877 pF 0.912 500 000 GHz 2: 74.648 QO 11.520 ce 0.9205 GHz Dot H1d CENTER 0.915 000 000 GHz SPAN 0.300 000 000 GHzF5CE Series (D2 type) @ MEASURING CIRCUIT o__] 2 5 -_____0 1 to 6: Pin numbers m@ PART NUMBER DESIGNATION [Designation example] FAR-F5CE-OOOMOO-p200-0 (1) (2) (3) (1) Frequency designation : Specify the nominal frequency in six alphanumeric characters. Enter M (for MHz) at the decimal point. Refer to standard frequencies. [Example] 836.5 MHz => 836M50 (2) Serial number : Specify a characters from 01 to 99. Refer to standard frequencies. (3) Packing (Reeled tape) : W :1kpcs/reel V :3k pcs/reel U :5kpcs/reel @ MARKING LOGO PART SYMBOL DATE CODE 15F5CE Series (D2 type) lm PACKAGE DIMENSION 3.0 3.0 4-R 0.3 | 0.75 | bd | 0.75 | 1.2 MAX Dimensions in mm * : Two types of package are available. 16 One of them may be supplied without these cut outs.m@ PACKING: Reel type 1. Reel Dimensions F5CE Series (D2 type) 12.4 + 38 2.0+0.5 Po _ 13.0 0.2 r , Type | Volume _ iI WwW 1k pcs S| & J S| a Vv 3k pcs 621.0 +0.8 U 5k pcs 18.4 MAX Dimensions in mm 2. Packing Style Reel side Pulling side #1PIN Pulling side 173. Tape Dimensions F5CE Series (D2 type) 4.0 +0.1 2.0 +0.05 wee 4 S vot g : Lo S ae ae \.f | | } Le oleteiete fi : | | \ Ir - 01.5 15 Dimensions in mmFUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-8588, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 http://www. fujitsu.co.jp/ North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, USA Tel: (408) 922-9000 Fax: (408) 922-9179 Customer Response Center Mon. - Fri.: 7am -5 pm (PST) Tel: (800) 866-8608 Fax: (408) 922-9179 http.//www. fujitsumicro.com/ Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 D-63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 http://www. fujitsu-ede.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220 http//www.fmap.com.sg/ F9806 FUJITSU LIMITED Printed in Japan F5CE Series (D2 type) All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. 19