623253B02756G - AAVID THERMALLOY

05/2016

AWB7223

1.930 -1.995 GHz

Small-Cell Power Amplier Module

Data Sheet - Rev 2.1

M52 Package

14 Pin 7 mm x 7 mm x 1.3 mm

Surface Mount Module

Figure 1: Block Diagram

PRODUCT DESCRIPTION

The AWB7223 is a fully matched, Multi-Chip-Module

(MCM) designed for picocell, femtocell, and customer

premises equipment (CPE) applications. Its high

linearity and efciency meet the extremely demanding

needs of small cell infrastructure architectures.

Designed for WCDMA, HSDPA, and LTE air interfaces

operating in the 1.930 GHz to 1.995 GHz band, the

AWB7223 delivers up to +27 dBm of WCDMA (64

DPCH) power with an ACPR better than -50 dBc. It

FEATURES

• InGaP HBT Technology

• -51 dBc ACPR @ 65 MHz, +27 dBm

• 30.5 dB Gain

• High Efciency

• Low Transistor Junction Temperature

• Matched for a 50 Ω System

• Low Prole Miniature Surface Mount Package;

RoHS Compliant

• Multi-Carrier Capability

APPLICATIONS

• WCDMA, HSDPA and LTE Air Interfaces

• Picocell, Femtocell, Home Nodes

• Customer Premises Equipment (CPE)

• Data Cards and Terminals

operates from a convenient +4.5 V supply and provides

30.5 dB of gain. The device is manufactured using an

advanced InGaP HBT MMIC technology offering

state-of-the-art reliability, temperature stability, and

ruggedness. The self-contained 7 mm x 7 mm x 1.3

mm surface mount package incorporates RF matching

networks optimized for output power, efciency, and

linearity in a 50 Ω system.

RF Input

Vcc 1

RF Output

VREF

Bias

Network

Matching

Network

Matching

Network

Bias

Network

Vcc 2

Matching

Network

Matching

Network

Power

Detector

VDET

2Data Sheet - Rev 2.1

05/2016

AWB7223

Figure 2: Pinout (X-ray Top View)

Table 1: Pin Description

PIN NAME DESCRIPTION

1VREF Reference Voltage

2GND Ground

3GND Ground

4 VCC1 Supply Voltage

5RFIN RF Input

6GND Ground

DET

Detector Output

8GND Ground

9GND Ground

10 GND Ground

11 VCC2 Supply Voltage

12 RFOUT RF Output

13 GND Ground

14 GND Ground

GND

RFOU

RFIN

GND

VCC1

GND

VREF

VDET

VCC2

GND

3Data Sheet - Rev 2.1

05/2016

AWB7223

ELECTRICAL CHARACTERISTICS

Table 2: Absolute Minimum and Maximum Ratings

Table 3: Operating Ranges

PARAMETERMINTYPMAXUNIT COMMENTS

Operating Frequency (f) 1930 - 1995 MHz

Supply Voltage (V

)+3.6+4.5+4.65 V

Reference Voltage (V

REF

)+2.80

+2.85

+2.90

+0.5 VPA "on"

PA "shut down"

RF Output Power (P

OUT

)

(1)

-+27 -dBm

Case Te mperature (T

)

(2)

-40-+85°C

Functional operation is not implied under these conditions. Exceeding any

one or a combination of the Absolute Maximum Rating Conditions may cause

permanent damage to the device. Exposure to absolute ratings for extended

periods of time may adversely affect reliability.

PARAMETER MIN MAX UNIT

Supply Voltage (VCC)0+5 V

Reference Voltage (VREF)0+3.5 V

RF Output Power (POUT)-+30 dBm,

modulated

RF Input Power (PIN)-+10 dBm, CW

ESD Rating

Human Body Model (1)

Charged Device Model (2)

Class 1C

Class IV

MSL Rating (3) 4-

Junction Temperature (TJ)-+150 °C

Storage Temperature (TSTG) -40 +150 °C

Notes:

(1) JEDEC JS-001-2010.

(2) JEDEC JESD22-C101D.

(3) 260 °C peak reow.

The device may be operated safely over these conditions; however, parametric performance is guaranteed only

over the conditions dened in the electrical specications.

Notes:

(1) Typ RF Output Power is used during production test.

(2) Case Temperature references the board temperature at the ground paddle on the backside of the package.

4Data Sheet - Rev 2.1

05/2016

AWB7223

Table 4: Electrical Specications

(TC = +25 °C, VCC = +4.5 V, VREF = +2.85 V, 50 Ω system)

Notes:

(1) ACPR and Efciency measured at 1960 MHz.

(2) POUT = +27 dBm.

(3) TM1 WCDMA 64 DPCH.

(4) Use only VCC2 (pin 11) current when calculating device junction temperature.

PARAMETER MIN TYP MAX UNIT COMMENTS

Gain (2) 27 30.5 34 dB 1930 - 1995 MHz

ACPR (1), (2), (3)

@ 5 MHz

@ 10 MHz

-51

-63

-47

-60 dBc

Power-Added Efciency (1), (2), (3) 12 15.5 - %

Thermal Resistance (RJC) (4) - 12 - °C/W Junction to Case

Supply Current (1), (2), (3) - 720 930 mA total through VCC pins

Quiescent Current (Icq) 196 227 290 mA

Reference Current 10 13 18 mA through VREF pin

Leakage Current - 3 10 µAVCC = +5 V, VREF = 0 V

Harmonics

2fO

3fO, 4fO

-50

-54

-45

-50 dBc

Input Return Loss 15 20 - dB

Output Return Loss 15 20 - dB

P1dB -+35 -dBm CW tone

Spurious Output Level

(all spurious outputs) - - -60 dBc

POUT ≤ +27 dBm

In-band load VSWR < 5:1

Out-of-band load VSWR < 10:1

Applies over all voltage and

temperature operating ranges

Load mismatch stress with no

permanent degradation or failure 8:1 - - VSWR

VCC = +4.5 V, POUT = +27 dBm

Applies over full operating

temperature range

5Data Sheet - Rev 2.1

05/2016

AWB7223

APPLICATION INFORMATION

To ensure proper performance, refer to all related

Application Notes on the ANADIGICS web site:

http://www.anadigics.com

Shutdown Mode

The power amplier may be placed in a shutdown

mode by applying logic low levels (see Operating

Ranges table) to the VREF voltage.

Figure 3: Application Circuit Schematic

0.1uF100uF

GND

at slug

RF Input

GND

VCC2

VREF

GND

RFIN

VCC1

RF Output

1000pF

4.7KΩ

RFOUT

GND

VDET

GND

VCC2

10uF

0.1uF

VREF

VCC1

10uF 1000pF0.1uF100uF

DETOUT

0.1uF 100KΩ

AWB7223

TVS

Diode

TVS

Diode

Notes:

1. 10uF and 100uF capacitors are optional.

2. Applications that have large supply voltage transients may benefit from the use of TVS

diodes. For such applications, recommended TVS diodes are SM05T1G or SMJ5.0A.

GND

1000pF

GND

100uF

6Data Sheet - Rev 2.1

05/2016

AWB7223

Figure 4: PCB Footprint

7Data Sheet - Rev 2.1

05/2016

AWB7223

PACKAGE OUTLINE

Figure 5: M52 Package Outline - 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module

Figure 6: Branding Specication

B7223R

Pin 1 Identifier

Part Number

Date

Code

Y= Year WW= Work Week

Marking Code

ANADIGICS logo

Lot Number

Country Code

8Data Sheet - Rev 2.1

05/2016

AWB7223

COMPONENT PACKAGING

Figure 7: Tape & Reel Packaging

Table 5: Tape & Reel Dimensions

PIN 1

PACKAGE TYPE TAPE WIDTHPOCKET PITCHREEL

CAPACITY MAX REEL DIA

7 mm x 7 mm x 1.3 mm 16 mm 12 mm 2500 13"

WARNING

ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product

in any such application without written consent is prohibited.

IMPORTANT NOTICE

ANADIGICS, Inc.

141 Mount Bethel Road

Warren, New Jersey 07059, U.S.A.

Tel: +1 (908) 668-5000

Fax: +1 (908) 668-5132

URL: http://www.anadigics.com

ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.

The product specications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to

change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed

to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers

to verify that the information they are using is current before placing orders.

Data Sheet - Rev 2.1

05/2016

AWB7223

ORDERING INFORMATION

ORDER NUMBER TEMPERATURE

RANGE

PACKAGE

DESCRIPTION COMPONENT PACKAGING

AWB7223RM52P7 -40 °C to +85 °C

RoHS-compliant 14 Pin

20 pin, 4 x 4 x 0.80 mm

Surface Mount Module

Bags

AWB7223RM52P8 -40 °C to +85 °C

RoHS-compliant 14 Pin

20 pin, 4 x 4 x 0.80 mm

Surface Mount Module

Tape and Reel, 2500 pieces per Reel

AWB7223RM52P9 -40 °C to +85 °C

RoHS-compliant 14 Pin

20 pin, 4 x 4 x 0.80 mm

Surface Mount Module

Partial Reel