MCC TIP29,A,B,C(NPN) TIP30,A,B,C(PNP) omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components Features * * Mounting Torgue: 5 in-lbs Maximum Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) x Marking: Type Number * * * Rth(jc) is 4.167OC/W, Rth(ja) is 62.5OC/W Epoxy meets UL 94 V-0 flammability rating Moisure Sensitivity Level 1 1.0 Amp Complementary Silicon Power Transistors Maximum Ratings Symbol Rating Collector-Emitter Voltage V CBO Collector-Base Voltage V EB IC Emitter-Base Voltage Collector Current- Continuous Peak (1) Base Current-Continuous Total power dissipation @TC=25OC Derate above 25OC Junction Temperature Storage Temperature IB PD TJ , TSTG Rating 40 60 80 100 5.0 1.0 3.0 0.4 30 0.24 -55 to +150 -55 to +150 TIP29, TIP30 TIP29A, TIP30A TIP29B, TIP30B TIP29C, TIP30C V CEO Unit TO-220 V V A A W W/OC O C O C S F Q T A U 1 2 O Electrical Characteristics @ 25 C Unless Otherwise Specified Symbol Parameter Min Max C B Units 3 H OFF CHARACTERISTICS V CEO(SUS) IEBO ICES ICEO Collector-Emitter Sustaining Voltage(note 2) (IC=30mAdc, IB =0) TIP29, TIP30 TIP29A, TIP30A TIP29B, TIP30B TIP29C, TIP30C Emitter-Base Cutoff Current (VEB =5.0Vdc, IC=0) Collector Cutoff Current (V CE=40V, V EB=0) TIP29, TIP30 (V CE=60V, V EB=0) TIP29A, TIP30A (V CE=80V, V EB=0) TIP29B, TIP30B (V CE=100V, VEB =0) TIP29C, TIP30C Collector Cutoff Current (VCE=30Vdc, IB =0) TIP29, TIP29A, TIP30, TIP30A (V CE=60Vdc, IB =0) TIP29B, TIP29C, TIP30B, TIP30C K 40 60 80 100 --- --------1.0 Vdc J D mAdc R G N --------- 200 200 200 200 --- 0.3 --- 0.3 hFE(1) PIN 1. PIN 2. PIN 3. uAdc mAdc ON CHARACTERISTICS(2) DC Current Gain (IC=0.2Adc, V CE=4.0Vdc) 40 -----(IC=1.0Adc, V CE=4.0Vdc) 15 75 V CE(sat) Collector-Emitter Saturation Voltage (IC=1.0Adc, IB =125mAdc) --0.7 Vdc V BE(ON) Base-Emitter On Voltage Vdc (IC=1.0Adc,V CE=4.0Adc) --1.3 (note 3) fT Current-Gain-Bandwidth Product 3.0 --MHZ (IC=200mAdc, V CE=10Vdc, f=1.0MHZ) hfe Small-Signal Current Gain 20 ----(IC=0.2Adc, VCE=10Vdc, f=1.0KHz ) Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. 2. Pulse Test: Pulse Width=300us, Duty Cycle <2.0% 3. f T =| hfe | x f test Revision: C VV LL DIM A B C DIMENSIONS INCHES MM MIN MAX MIN MAX .560 .625 14.22 15.88 .380 .420 9.65 10.67 .140 .190 3.56 4.82 D F G H J K L N .020 .139 .190 --.012 .500 .045 .190 .045 .161 .110 .250 .025 .580 .060 .210 0.51 3.53 2.29 --0.30 12.70 1.14 4.83 1.14 4.09 2.79 6.35 0.64 14.73 1.52 5.33 Q R S T U V .100 .080 .045 .230 ----.045 .135 .115 .055 .270 .050 ----- 2.54 2.04 1.14 5.84 ----1.15 3.43 2.92 1.39 6.86 1.27 ----- www.mccsemi.com 1 of 3 BASE COLLECTOR EMITTER NOTE 2012/07/13 MCC TIP29,A,B,C(NPN) TIP30,A,B,C(PNP) Micro Commercial Components 3.0 2.0 500 100 70 50 TJ = 150C VCE = 2.0 V 25C -55C 30 10 7.0 5.0 0.03 1.0 0.7 0.5 tf @ VCC = 30 V 0.3 0.2 tf @ VCC = 10 V 0.1 0.07 0.05 0.5 0.07 0.1 1.0 0.2 0.3 IC, COLLECTOR CURRENT (AMP) 2.0 3.0 0.03 0.03 10 0.1 0.07 0.05 0.03 0.02 0.03 IC, COLLECTOR CURRENT (AMPS) t, TIME (s) 0.3 IC/IB = 10 TJ = 25C tr @ VCC = 30 V tr @ VCC = 10 V td @ VEB(off) = 2.0 V 0.05 0.07 0.1 0.3 0.5 0.7 1.0 IC, COLLECTOR CURRENT (AMP) 3.0 0.3 0.5 0.7 1.0 2.0 3.0 TJ = 150C 3.0 1 ms dc 0.1 SECOND BREAKDOWN LIMITED THERMALLY LIMITED @ TC = 25C BONDING WIRE LIMITED TIP29, 30 CURVES APPLY BELOW TIP29A, 30A RATED VCEO TIP29B, 30B TIP29C, 30C 0.1 10 1.0 4.0 20 40 VCE, COLLECTOR-EMITTER VOLTAGE, (VOLTS) 5 ms 100 Figure 4. Active Region Safe Operating Area Figure 3. Turn-On Time Revision: C 0.2 Figure 2. Turn-Off Time 2.0 0.7 0.5 0.05 0.07 0.1 IC, COLLECTOR CURRENT (AMP) Figure 1. DC Current Gain 1.0 IB1 = IB2 IC/IB = 10 ts = ts - 1/8 tf TJ = 25C ts t, TIME (s) hFE, DC CURRENT GAIN 300 www.mccsemi.com 2 of 3 2012/07/13 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-BP Bulk;1Kpcs/Box ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 3 of 3 2012/07/13