Applications:
Base Transceiver Stations, Tower Mounted Amplifier, Repeater
Major Characteristics
■Matched amplifier with low noise and high gain
■Off-the-shelf component, tape & reel packaged
■SMT compatible outline shape (Leadless Chip Carrier)
■Small footprint (9 mm by 11 mm)
Key Benefits
■Reduced handset transmit power
■Fully characterized component for reduced development effort
■Shorter design-to-market cycles
■Applied cost saving in production, quality and sourcing
Technical Data1)
DCS PCS
UMTS
min. typ. max. min. typ. max. min. typ. max.
Frequency Range MHz 1710 1790 1850 1910 1920 1980
Gain dB 12,7 13,7 12,2 13,2 12,2 13,0
Gain Ripple dB ±0,2 ±0,2 ±0,2
Noise figure dB 0,55 0,7 0,55 0,7 0,55 0,7
OIP 3 dBm 26 29 26 29 28 31
Isolation dB 16 16 16
S11 dB -7 -10 -7 -10 -7 -10
S22 dB -14 -20 -14 -20 -14 -20
Pout (1dB comp. Point) dBm
16,2 16,3 16,5
Operating Voltage V 4,2 5 4,2 5 4,2 5
Current Consumption
mA 34 37 40 34 37 40 34 37 40
Environmental Specifications
■Operating temperature -40˚C...+85˚C
■Storage temperature -40˚C...+85˚C
■Max. peak temperature during reflow +235˚C
■Max. storage duration on air before reflow2) 1 year3)
1) Z0 = 50 Ohm at input and output, Pin = -10 dBm, Vdd = 4,2 V, 25˚C
2) storage in dry nitrogen atmosphere is recommended before reflow
3) approved by tests according to JEDEC 113-A standard, Level 2
LNA for Mobile
Communication Infrastructure
LNA A 1012
Copyright © 2001, Tyco Electronics AMP GmbH, Electronic Modules · Printed in Germany · TEC.EM005-0501.1-E