Einprebolzen Gewindehulse/Einprebolzen Nietmutter H cross-section A.-A press-fit bolt threaded sleeve/press-fit bolt riveted nut l=3.7/5.6/6.0/6.3/9.0 or #4-40 M3 oder/ or #4-40 l=7,5/8,5/9,0 E J M3 oder/ A M3 oder/ Schnitt A-A or #4-40 A min. 8,5 - max.9,5 * 6,4 l 9 (5.9) Nietmutter mit Klemmteil Abstandshulse clamping thread standoff 7,5 M3 3,2 5,5 (min.2,5) l F L G A 3,2 min. 3,0 min. 4,5 0,6 9 D 3,9 Schichtaufbau im metallisierten Loch fur Einpressbolzen siehe Zeichnung 114109 metal plating of plated-through hole for press-fit bolt see drawing 114109 B * C Polzahl / Terminal Length : Type : Zubehor / Logo : 25.0 8.0 12.5 11.0 6.3 19.3 10.8 0.8 15 39.1 24.7 33.3 8.0 12.5 11.0 6.3 27.5 10.8 0.8 25 53.0 38.5 47.0 8.0 12.5 11.0 6.3 41.3 10.8 0.8 37 69.3 54.9 63.5 8.0 12.5 11.0 6.3 57.7 10.8 0.8 50 67.0 52.5 61.1 10.8 15.4 11.0 6.3 55.3 13.6 0.8 A B C D E F 0.3 -0.2 0.2 -0.2 0.3 0.2 3.2 mm Class : 207=0.8m (30 in) Au CONTACT, TIN/LEAD TERMINAL ERNI Refer to table on page 2 Special : Refer to table on page 2 G H 0.3 -0.3 J 0.2 L 0.1 Missing information and dimensions according to DIN 41652 Sonstige Angaben siehe Fertigungsunterlagen / Information: Accessory : Sonderausfuhrung / 16.4 Fehlende Masse und Angaben siehe DIN 41652 / 5 Anforderungsstufe / Aufdruck / Pressfit, Pressfit zone EE 2.5 mm Terminal Type : 30.8 Polzahl/ No. of contacts Refer to table on page 2 No. of contacts : Anschlulange / Bauart / Refer to table on page 2 Part No. : Anschluart / / for PCB-thickness of 1,6 mm Additional indications please see the production documentation Tolerances 2:1 Scale All Dimensions in mm Consider protection memo from DIN 34 Ident-Nr. / bei LP-Dicke von 1,6 mm 9 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. e Index 05.09.2000 Date Subject to modification without prior notice. Drawing will not be updated. Designation TMC-S 9 bis 50-EE25-7.5 TMC-S 9 to 50-EE25-7.5 Elektroapparate GmbH D-73099 ADELBERG M:00021091.SZN 054886 TMCS I Ordering Information D-Sub Connector Pressfit Vertical Female Assembly Height 9 mm Number of Pins 9 15 25 37 50 104282 104283 104480 104128 Accessory Termination Side: Pressfit bolt M3 064461 104280 104281 Accessory Termination Side: Pressfit bolt #4-40 104125 104126 104127 Accessory Mating Side: Threaded sleeve M3 114075 114076 114077 Accessory Mating Side: Threaded sleeve #4-40 114080 114081 Accessory Termination Side: Pressfit bolt 114078 114079 Accessory Termination Side: Pressfit bolt 114082 114083 114084 063689 063690 114094 114098 114099 Accessory Termination Side: Rivet nut M3 104989 114091 Accessory Termination Side: Rivet nut #4-40 114095 114096 114097 www.erni.com