6-17
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
6
5mm
LED CBI
®
Circuit Board Indicator
For Backlighting
550-xx10
8.76
[.345]
.508
[.020]
12.57
[.495]
1.2
[.048]
6.22
[.245]
6.10
[.240]
3.68
[.145]
2.54
[.100]
CATHODE
Red Cathode for
Red/Green Bi-Color
Yellow Cathode for
Yellow/Green Bi-Color
2.54
[.100]
0.9
[.035]
3.05
[.120]
RECOMMENDED
P.C. BOARD LAYOUT
PART NO. COLOR
HIGH EFFICIENCY, TINTED,
NON DIFFUSED
550-1510 Green
550-1610 Yellow
550-1710 Red
BI-COLOR
550-3010 Red/Green
550-3110 Yellow/Green
Features
• Extended housing and narrow viewing angle LEDs reduce
light bleed
• Multiple CBIs form horizontal LED arrays on 6.35mm
(0.250”) center-lines.
• Optional stabilizing pin available - Contact Dialight for details
• High Contrast, UL 94 V-0 rated, black housing
• Oxygen index: 32%
• Polymer content: PBT, 0.275 g
• Housing stand-offs facilitate PCB cleaning
• Solderability per MIL-STD-202F, method 208F
• LEDs are safe for direct viewing per IEC 825-1, EN-60825-1
Tolerance note: As noted, otherwise:
• LED Protrusion: ±0.04 mm [±0.016]
• CBI Housing: ±0.02mm[±0.008]
Dimensions in mm [inches]
Peak I
V
V
F
Test Viewing LED
Part Number Color Wavelength nm mcd Volts Current (mA) Angle 2
ΘΘ½
Data sheet Page #
550-1510 Green 565 110 2.2 20 30° 5HN-9420 6-50
550-1610 Yellow 585 110 2.2 20 30° 5HN-9421 6-50
550-1710 Red 650 110 2.1 20 30° 5HN-9419 6-50
550-3010 Red/Green 660/565 90/40 1.8/2.1 20 60° 521-9651 6-46
550-3110 Yellow/Green 585/565 8.7/8.7 2.1/2.1 20 50° 521-9724 6-46
Typical Operating Characteristics (TA=25°C)
See LED data sheet for additional information
To order any of the 550-xx10 part numbers with
Reverse Polarity (Cathode Left), please add -010
to the part numbers shown above.
Standard Polarity shown in drawing: Cathode right
550 x x 1 0 0 1 0
Reverse Polarity Option
1) Cathode Left
–010 Ordering Code Suffix required
ONLY for Reverse Polarity Option
LED Type
PART NUMBER ORDERING CODE
Series
– –
See page 6-55 and 6-56 for Reference Only LED Drive Circuit Examples. See page 6-57 for Pin Out
6-46
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
5mm Discrete LED
Bi-Color
Non-Tinted, Diffused
521-9651, -9724
5.00
[.197]
8.64[.340]
22.1 [.87]
MIN.
0.51
[.020]
CATHODE
GREEN,
RED/GREEN
BI-COLOR
521-9651
CATHODE
YELLOW,
YELLOW/GREEN
BI-COLOR
521-9724
1.00
[.04]
5.59
[.220]
2.54
[.100]
1.50
[.059]
MAX
PART NO. LED COLOR
521-9651 Red/Green
521-9724 Yellow/Green
Red/Green Yellow/Green
ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9651 -9724
Power Dissipation (mW) 100/100 60/100
Forward Current (mA) 40/30 20/30
Derating (mA/°C)
From 50°C
.5/.4 .25/.40
Peak Current (mA) 200/120 80/120
Pulse width = 100 µs
Operating Temperature (°C) -55/+100 -55/+100
Storage Temperature (°C) -55/+100 -55/+100
Soldering Temperature 260°C, 5 seconds, 1.6 mm from case
Red/Green Yellow/Green
OPERATING CHARACTERISTICS (TA=25°C) -9651 -9724
Luminous Intensity (mcd) Min. 29/12.6 2.5/2.5
IF=20mA Typical 90/40 8.7/8.7
Peak Wavelength (nm) Typical 660/565 585/565
λ Peak
Viewing Angle (2Θ ½) Typical 60° 50°
Forward Voltage (V) Typical 1.8/2.1 2.1/2.1
IF=20mA Max. 2.4/2.8 2.8/2.8
Dimensions in mm [inches]
MOUNTING CLIP: 515-0005
located on page 6-48
Θ
is the off axis angle at which the luminous intensity is half the axial luminous intensity
Solder Adherence per MIL-STD-202E, Method 208C
6-50
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
5mm
High Efficiency
Tinted, Non-Diffused
5HN-xxxx
TYPE COLOR
*5HN-9419 Red
*5HN-9420 Green
*5HN-9421 Yellow
Red Green Yellow
ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9419 -9420 -9421
Power Dissipation (mW) 75 75 75
Derating (mW/°C)
From 50°
1.5 1.5 1.5
Forward Current (mA) 25 25 25
Peak Current (mA) 60 60 60
Pulse Width = 1 µs
Operating Temperature (°C) -55/+100 -55/+100 -55/+100
Storage Temperature (°C) -55/+100 -55/+100 -55/+100
Soldering Temperature 260°C, 5 seconds, 1.6 mm from case
Red Green Yellow
OPERATING CHARACTERISTICS (TA=25°C) -9419 -9420 -9421
Luminous Intensity (mcd) Min. 56 56 56
IF=20mA Typical 110 110 110
Peak Wavelength (nm) Typical 650 565 565
λ Peak
Viewing Angle (2Θ ½) 30° 30° 30°
Forward Voltage (V)l Typical 2.1 2.2 2.2
IF=20mA Max 2.55 2.55 2.55
Reverse Voltage (V), IR=100µA Min. 5 5 5
* NOT A VALID PART
NUMBER. THIS SHEET IS FOR
REFERENCE ONLY.
Θ
is the off axis angle at which the luminous intensity is half the axial luminous intensity
Solder Adherence per MIL-STD-202E, Method 208C
