Product Brief Sense2Go2 development kit 24 GHz sensor development kit utilizing Infineon XMC4200 32-bit ARM(R) Cortex(R)-M4 MCU series This development kit allows the user to implement and test several sensing applications at the 24 GHz ISM band such as Doppler based movement detection, Doppler based direction of movement detection, Doppler based speed estimation and distance measurements of targets. The kit consists of the BGT24MTR11 transceiver MMIC and a XMC4200 32-bit ARM(R) Cortex(R)-M4 for signal processing and communication via USB. The CPU is already preprogrammed using Infineon's DAVETM development tool. The module also comes bundled with a stand-alone firmware for movement detection without the aid of a PC, so this platform is a good starting point for your own applications. It samples up to 2 IF channels of the transceiver chipset and communicates via USB interface to a connected PC. A provided PC application GUI (Windows XP/Vista/7/8) can be used to display and analyze acquired data in time and frequency domain. Applications Indoor/outdoor smart lighting Intruder alarm Motion detectors Intelligent door openers Sense2Go2 development kit - main components Micro-USB Pin header X2 Pin header X1 TVS diode User LED1 @ P1.5 User LED2 @ P1.15 BGT24MTR11 24 GHz radar IC Baseband amplifiers Cortex(R) debug connector Crystal * Usage of the Doppler FW and SW requires agreeing to Infineon's user's agreement and licensing terms. www.infineon.com Capability to detect motion, speed and direction of movement (approa ching or retreating) Very small form-factor (4 cm x 3.5 cm) 24 GHz ISM band module that can be used as a development kit size or mounted as a daughter board in a system. BGT24MTR11 - 24 GHz highly integrated RF MMIC XMC4200 ARM(R) Cortex(R)-M4 - 32-bit industrial microcontroller Debug over cortex 10 pin debug connector Low power mode Integrated patch antenna Contents of the kit includes Reverse current protection diode Voltage regulator Features User's Manual SW GUI to operate kit Doppler FW and SW * Schematic and Bill-of-Materials of Module Micro USB-to-USB Cable (3") Product Brief Sense2Go2 development kit 24 GHz sensor development kit utilizing Infineon XMC4200 32-bit ARM(R) Cortex(R)-M4 MCU series Sense2Go2 block diagram To PC Stand-by LED +5 V Micro USB Microcontroller +3.3 V SPI +3.3 V Freq counter DIVOUT 23 kHz I/O VCO modulation FFT, DSP LED2 Temp. sensor LED1 DAC Vt,coarse IF1Q Amp1 RFOUT PA Buffer MPA LO buffer 90 BGT24MTR11 Tx antenna Wilkinson IF1Q LNA PPF IF1I Amp2 Power sensor 16 Vt,fine Filter ADC ADC 3 SPI 65536 DIVOUT 1.5 GHz Control outputs XMC4200 External DC input (maximum +5 V) Power supply Trigger RF1 0 Amp1 Rx antenna IF1I Details www.infineon.com/sense2go2 www.infineon.com/xmc www.infineon.com/dave Product summary Type Description Ordering code (OPN) BGT24MTR11 24 GHz radar chip with 1 transmitter and 1 receiver in PG-VQFN-32-9 package BGT24MTR11E6327XUMA1 Sense2Go2 Development kit DEMO SENSE2GO2 XMC4200-Q48K256 AB 80 MHz ARM(R) Cortex(R)-M4 with high resolution PWM unit, 256 kB flash, 40 kB RAM, rich analog-mixed signal, timer/PWM and communication peripherals in PG-VQFN-48 XMC4200Q48K256ABXUMA1 BAS3010A-03W Medium power schottky diode for high efficiency DC/DC conversion, fast switching, protection and clamping applications BAS3010A03WE6327HTSA1 ESD8V0L2B-03L Low capacitance TVS diode ESD / transient protection of high-speed data lines in a small form factor of 1.0 x 0.6 x 0.4 mm ESD8V0L2B03LE6327XTMA1 Published by Infineon Technologies AG 85579 Neubiberg, Germany (c) 2016 Infineon Technologies AG. All Rights Reserved. Please note! THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE. WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED APPLICATION. WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR THE INFORMATION GIVEN HEREIN AT ANY TIME. Order Number: B142-I0102-V4-7600-EU-EC-P Date: 03 / 2016 Additional information For further information on technologies, our products, the application of our products, delivery terms and conditions and/or prices please contact your nearest Infineon Technologies office (www.infineon.com). Warnings Due to technical requirements, our products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by us in a written document signed by authorized representatives of Infineon Technologies, our products may not be used in any life endangering applications, including but not limited to medical, nuclear, military, life critical or any other applications where a failure of the product or any consequences of the use thereof can result in personal injury.