ACST-200 CURRENT SENSE TRANSFORMER FEATURES * Dielectric Strength 3000 Vrms (4 kV version upon request) * Split bobbin for 5.5 mm creepage and clearance (8 mm version upon request) * Low profile (less than 16 mm height) * Epoxy sealed version available * UL approved Class B insulation system OUTPUT VOLTAGE GENERAL DATA Dielectric Strength 3000 Vrms (at sea level for 1 min.) between primary and secondary 3 Ambient Temperature Operating Output Voltage [V] 2,5 Storage 2 1,5 1 0,5 0 0 5 10 15 20 25 30 Input Current [A] -40C (-40F) to 70C (158F) -40C (-40F) to 105C (221F) Vibration 0.062" (1.5 mm) DA at 10-55 Hz Shock 10 g Bobbin Nylon 66 Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270C (518F) Max. Solder Time 5 seconds Weight 13 grams Packing unit in pcs 48 per plastic tray / 576 per carton box Example for ACST-260-1 NOTES 1. All values at 20C (68F). 2. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2007-03-12 ACST-200 ORDERING DATA ELECTRICAL DATA Primary Resistance (Ohms) Sense Resistance (Ohms) Secondary Inductance (H) Primary Sense Frequency (Hz) 32 530 0.198 0.008 50-200 1-30A 64 530 0.785 0.025 50-200 1-30A 90 530 1.7 0.06 50-200 1:200 1-30A 120 530 3.2 0.12 50-200 ACST-259-1 1:300 1-30A 140 530 7.4 0.27 50-200 ACST-260-1 1:500 1-30A 110 530 20 0.72 50-200 ACST-261-1 1:1000 1-30A 60 530 79 2.4 50-200 ACST-260-5 1:1500 1-30A 45 530 220 5.2 50-200 ACST-260-8 1:1500 1-30A 45 530 220 5.2 50-200 ACST-261-8 1:500 1-30A 110 530 20 0.72 50-200 Part Number Turns Ratio Current Range ACST-255-1 1:50 1-30A ACST-256-1 1:100 ACST-257-1 1:150 ACST-258-1 Typical Output (mV / A) NOTES: 1. Typical Output test condition is: 10A @ 50Hz / 60Ohm load 2. Secondary Inductance test condition is: 100Hz / 1V 3. Suffix "-8" at the end of part number indicates 8 mm creepage and clearance. MECHANICAL DATA .783 Max (19.9) 8 1A Primary .645 Max (16.4) Sense 2A 5 8 Indicates Polarity 5 .673 (17.1) .370 (9.40) 1A 2A 8 2A 1A .402 (10.2) .169 (4.30) 5 2 x .025 Max Sq. (.635) .598 (15.2) 2 x O .06 Max (1.524) Bottom View Dimensions in inches with metric equivalents in parentheses. Tolerance: 0.010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 office@ZETTLERelectronics.com www.ZETTLERelectronics.com 2007-03-12