0024B0311-9 - TE CONNECTIVITY

DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE

DESIGNATED.

Outer jacket color will be white (designated by a “-9" appended

to the part number, e.g. 0024B0311-9) unless otherwise

specied.

Designate outer jacket color with a dash number in accordance

with MIL-STD-681. Other codes and sufxes may be added to

the part number, as necessary, to capture any additional

requirements imposed by the purchase order.

Users should evaluate the suitability of this product for their application. Specications are subject to change without notice. Tyco Electronics also

reserves the right to make changes in materials or processing, which do not affect compliance with any specication, without notication to Buyer.

The TE logo, Tyco Electronics, Cheminax, Raychem, Rayfoam and Thermorad are trademarks.

501 Oakside Avenue

Redwood City, California 94063-3800

1-800-227-8816 Fax: 1-650-361-6297

Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS

REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE

ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

DIELECTRICS

Rayfoam L

Colors - White/Tan

CONDUCTORS

AWG 24, 7 Strands of

AWG 32, Tin-Coated

Copper

.122

.139

.167

.0240

SPECIFICATION CONTROL DRAWING 0024B0311

CHEMINAX 100 OHM, AWG 24, 7 STRANDS OF AWG 32, TWINAXIAL CABLE Date 4-5-10

Revision D

THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200.

CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS

.057

WRAP

Aluminum Polyester

SHIELD

AWG 38,

Tin-Coated Copper

JACKET

Thermorad S

CHARACTERISTIC IMPEDANCE 100 ± 15 ohms, Method D

at 1 - 100 MHz

MUTUAL CAPACITANCE 13.6 pF/ft. (nominal)

VELOCITY OF PROPAGATION 76% (nominal)

ADDITIONAL ELECTRICAL REQUIREMENTS ON PAGE 2

ADDITIONAL REQUIREMENTS

ELECTRICAL

CONDUCTOR RESISTANCE 26.2 ohms/1000 ft. (nominal)

INSULATION RESISTANCE 10,000 megohms (minimum)

for 1000 ft.

JACKET FLAWS

SPARK TEST

IMPULSE TEST 1.0 kV (rms)

6.0 kV (peak)

VOLTAGE WITHSTAND (DIELECTRIC) 1000 volts (rms) (minimum)

ENVIRONMENTAL

FLAMMABILITY Method C

HEAT SHOCK 225°C

LOW TEMPERATURE-COLD BEND -55°C/4.50 inch mandrel

VOLTAGE WITHSTAND

(Post Environmental) 1000 volts (rms),1 minute

PHYSICAL

INSULATION (DIELECTRIC)

(Prior to Cabling)

ELONGATION

TENSILE STRENGTH 50% (minimum)

1000 lbf/in2 (minimum)

JACKET

ELONGATION

TENSILE STRENGTH 200% (minimum)

2000 lbf/in2 (minimum)

JACKET THICKNESS .014 inch (nominal)

SHIELD COVERAGE 90% (minimum)

WRAP .0020 inch thick (nominal)

25% overlap (minimum)

Aluminum facing out

WEIGHT 16.2 lbs/1000 ft. (nominal)