RS101 THRU RS107 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * * * Low power loss, high efficiency Low leakage Low forward voltage drop High current capability High speed switching High surge capabitity High reliability Guard ring construction on dice Anti-ESD RS-1 .360 (9.1) .414 (10.5) .374 (9.5) MECHANICAL DATA * * * * Epoxy: Device has UL flammability classification 94V-O Mounting position: Any Weight: 0.01 gram (Approx.) Flat lead frame .320 (8.1) AC .390 .035 (0.9) DIA. MIN. (9.9) .028 (0.7) TYP. .160 (4.1) .140 (3.6) SPACING .650 (16.5) .610 (15.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .161 (4.1) .150 (3.8) resistive or inductive load. .050 (1.27) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RS101 RS102 RS103 RS104 RS105 RS106 RS107 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T A = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 1.0 Amps I FSM 30 Amps I T 3.7 A 2 /Sec 2 Current Squarad Time Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range R 1JC 15 R 1JA 50 T J, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A = 100 C VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". RS101 RS102 RS103 RS104 1.1 RS105 RS106 RS107 UNITS Volts 2.0 200 uAmps 2014-12 REV:A AVERAGE FORWARD CURRENT, (A) 1.0 0.8 0.6 0.4 Single Phase Half Wave 60 Hz Inductive or Resistive Load 0.2 0 0 50 100 150 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RS101 THRU RS107 ) 4 1.0 0.4 0.1 0.04 0.01 T A = 25 OC Pulse Width = 300mS 1% Duty Cycle 0 O AMBIENT TEMPERATURE, ( C) 1000 TA = 100 OC 10 1 TA = 25 OC 0.1 0 20 40 60 80 100 1.0 1.5 2.0 2.5 3.0 3.5 FIG.2 TYPICAL L INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 100 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TY YPICAL REVERSE CHARACTERIST TICS 30 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 5 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM NON-REPETITIIVE FORWARD SURGE CURRENT Marking Description Rectron Logo RS10X Part No. Voltage-code UL Logo Year - code (Y:Last digit of year & A:2010,B:2011......) VYWW Week - code (WW:01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE RS-1 -B EA PER BOX 600 INNER BOX SIZE CARTON SIZE (mm) (mm) 240*239*35 497*255*162 EA PER CARTON 4,800 GROSS WEIGHT(Kg) 9.264 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Rectron: RS107 RS101 RS104 RS106 RS103 RS102 RS105