Hyper SIDELED long life Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant LB A6SG, LT A6SG Released Besondere Merkmale Features * Gehausetyp: weies SMT Gehause, farbloser klarer Silikon-Verguss * Besonderheit des Bauteils: mehr Licht durch erhohten optischen Wirkungsgrad; extrem breite Abstrahlcharakteristik; ideal fur Hinterleuchtungen und Einkopplungen in Lichtleiter * Wellenlange: 470 nm (blau), 528 nm (true green) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: ThinGaN * optischer Wirkungsgrad: 14 lm/W (blau), 36 lm/W (true green) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12-mm Gurt mit 2000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * package: white SMT package, colorless clear silicone resin * feature of the device: more light due to higher optical efficiency; extremely wide viewing angle; ideal for backlighting and coupling in light guides * wavelength: 470 nm (blue), 528 nm (true green) * viewing angle: Lambertian Emitter (120) * technology: ThinGaN * optical efficiency: 14 lm/W (blue), 36 lm/W (true green) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12 mm tape with 2000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D Anwendungen * Einkopplung in Lichtleiter * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten Applications * coupling into light guides * backlighting (LCD, switches, keys, displays, illuminated advertising) * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire 2012-06-15 1 LB A6SG, LT A6SG Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 16 Lichtstrom2) Seite 16 Bestellnummer Type Color of Emission Luminous Intensity1) page 16 Luminous Flux2) page 16 IF = 20 mA IV (mcd) IF = 20 mA V (mlm) Ordering Code LB A6SG-T1U2-35 blue 280 ... 710 1.480 (typ.) Q65110A9377 LT A6SG-V1AB-36 true green 710 ... 1.800 3.760 (typ.) Q65110A6030 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt und Farbe geliefert. Z.B.: LB A6SG-T1U2-35 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen T1,T2, U1 oder U2 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LB A6SG-T1U2-35 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, -4 oder -5 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LB A6SG-T1U2-35 means that only one group T1,T2, U1 or U2 will be shippable for any one reel and color. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LB A6SG-T1U2-35 means that only 1 wavelength group -3, -4 oder -5 will be shippable (see page 5 for explanation). In order to ensure availability, single wavelength groups will not be orderable. 2012-06-15 2 LB A6SG, LT A6SG Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values LB Einheit Unit LT Betriebstemperatur Operating temperature range Top - 40 ... + 110 C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj + 125 C 50 5 mA mA mA Durchlassstrom Forward current (TA=25C) IF (min.) IF Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM 300 Sperrspannung3) Seite 16 Reverse voltage3) page 16 (TA=25C) VR not designed for reverse operation 2012-06-15 3 V LB A6SG, LT A6SG Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlange5) Seite 15 Dominant wavelength5) page 15 IF = 20 mA Symbol Symbol Werte Values Einheit Unit LB LT (typ.) peak 465 523 nm (min.) (typ.) (max.) dom 464 470 476 519 528 543 nm 25 33 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 Durchlassspannung6) Seite 16 Forward voltage6) page 16 IF = 20 mA (min.) (typ.) (max.) VF VF VF 2.9 3.2 3.7 Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR not designed for A reverse operation A 120 2.8 3.2 3.7 Grad deg. V V V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.04 0.04 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.02 0.03 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 4.0 - 3.6 mV/K (max.) Rth JA 380** K/W (max.) Rth JS 220** K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 16 Junction/ambient4) page 16 Sperrschicht/Lotpad Junction/solder point * Einzelgruppen siehe Seite 5 Individual groups on page 5 **Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2012-06-15 4 LB A6SG, LT A6SG Wellenlangengruppen (Dominantwellenlange)5) Seite 17 Wavelength Groups (Dominant Wavelength)5) page 17 Gruppe Group blue true green Einheit Unit min. max. min. max. 3 464 468 519 525 nm 4 468 472 525 531 nm 5 472 476 531 537 nm 537 543 nm 6 Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 16 Luminous Intensity1) page 16 IV (mcd) T1 T2 U1 U2 V1 V2 AA AB 280 ... 355 355 ... 450 450 ... 560 560 ... 710 710 ... 900 900 ...1.120 1.120 ...1.400 1.400 ...1.800 Lichtstrom2) Seite 16 Luminous Flux2) page 16 V (mlm) 950 (typ.) 1.200 (typ.) 1.500 (typ.) 1.900 (typ.) 2.400 (typ.) 3.000 (typ.) 3.700 (typ.) 4.800 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen konnen nicht bestellt werden. Note: The standard shipping format for serial types includes a familiy group of all individual groups of only a few individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: T1-3 Example: T1-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength T1 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2012-06-15 5 LB A6SG, LT A6SG Relative spektrale Emission2) Seite 16 Relative Spectral Emission2) page 16 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TS = 25 C; IF = 20 mA OHL00192 100 I rel % 80 V 60 blue true green 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 16 Radiation Characteristic2) page 16 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2012-06-15 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LB A6SG, LT A6SG Durchlassstrom2) Seite 16 Forward Current2) page 16 IF = f (VF); TS = 25 C Relative Lichtstarke2) 7) Seite 16 Relative Luminous Intensity2) 7) page 16 IV/IV(20 mA) = f (IF); TS = 25 C OHL02359 10 2 IV I V (20 mA) mA IF OHL02386 10 1 5 10 1 10 0 5 5 10 0 2.5 3 3.5 4 10 -1 0 10 4.5 V 5 5 10 1 mA 10 2 IF VF Relative Vorwartsspannung2) Seite 16 Relative Forward Voltage2) page 16 VF = VF - VF(25 C) = f (Tj); IF = 20 mA VF Relative Lichtstarke2) Seite 16 Relative Luminous Intensity2) page 16 IV/IV(25 C) = f (Tj); IF = 20 mA OHL02912 0.4 V OHL02913 1.1 IV I V (25 C) 0.3 true green blue 0.8 0.2 0.7 0.1 0.6 0.5 0 0.4 -0.1 0.3 true green blue 0.2 -0.2 0.1 -0.3 -60 -40 -20 0 20 40 60 0 -60 -40 -20 0 C 100 Tj 2012-06-15 20 40 60 C 100 Tj 7 LB A6SG, LT A6SG Dominante Wellenlange2) Seite 16 Dominant Wavelength2) page 16 dom = f (IF); TS = 25 C, blue 478 nm Dominante Wellenlange2) Seite 16 Dominant Wavelength2) page 16 dom = f (IF); TS = 25 C, true green OHL02481 OHL02527 545 nm dom dom 476 535 474 530 472 525 true green 470 520 468 515 466 464 510 505 0 10 20 30 40 50 60 70 80 mA 100 IF 2012-06-15 0 20 40 60 80 mA 120 IF 8 LB A6SG, LT A6SG Angestrebte mittlere Lebensdauer2) Seite 16 fur mittlere Helligkeitsgruppe Target median Lifetime2) page 16 for median Brightness Group Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f (T ) IF OHL01370 60 mA Bedingungen mittlere Lebensdauer Conditions median Lifetime IF = 25 mA 50'000 50 TA TS 40 Einheit Unit Betriebsstunden operating hours TA = 25C IF = 25 mA TA = 85C 30 10'000 Betriebsstunden operating hours 20 10 TA temp. ambient TS temp. solder point 0 0 20 40 60 100 C 120 80 T Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C 0.35 IF A 0.25 0.20 0.15 OHL01536 t 0.35 IF A tP D = TP IF t D = TP T D= IF T 0.25 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 D= 0.20 0.15 0.10 0.10 0.05 0.05 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2012-06-15 OHL01585 tP 9 LB A6SG, LT A6SG Mazeichnung8) Seite 16 Package Outlines8) page 16 1.1 (0.043) 2.54 (0.100) spacing Cathode 0.7 (0.028) 4.2 (0.165) 3.8 (0.150) 2.4 (0.094) 2.8 (0.110) (2.4 (0.094)) 0.9 (0.035) (2.85 (0.112)) Anode (1.4 (0.055)) Cathode marking (R1) 3.8 (0.150) 3.4 (0.134) (0.3 (0.012)) (2.9 (0.114)) ESD Protection Diode 4.2 (0.165) 3.8 (0.150) A C C A GPLY6136 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 67 mg Gurtung / Polaritat und Lage8) Seite 16 Verpackungseinheit 2000/Rolle, o330 mm Method of Taping / Polarity and Orientation 8) page 16 Packing unit 2000/reel, o330 mm 4 (0.157) 4.25 (0.167) 8 (0.315) Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet Note: Package not suitalbe for ultra sonic cleaning 2012-06-15 10 12 (0.472) 1.75 (0.069) Cathode/Collector Marking 5.5 (0.217) 2 (0.079) 3.95 (0.156) 1.5 (0.059) OHAY2273 LB A6SG, LT A6SG Empfohlenes Lotpaddesign8) Seite 16 Recommended Solder Pad8) page 16 Reflow Loten Reflow Soldering 3.0 (0.118) 3.7 (0.146) 1.2 (0.047) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 Lotstopplack Solder resist OHLPY965 2012-06-15 11 LB A6SG, LT A6SG Lotbedingungen Soldering Conditions Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 50 0 100 150 200 250 s 300 t Anm.: Das Gehause ist nicht fur nasschemische Reinigung geeignet. Note: Package not suitable for wetcleaning. Profile Feature Pb-Free (SnAgCu) Assembly Recommendation Max. Ratings Ramp-up Rate to Preheat* 25C to 150C 2 K/ s 3K/s Time ts from TSmin to TSmax (150C to 200C 100 s min. 60sec max. 120sec Ramp-up Rate to Peak*) 180C to TP 2 K/ s 3K/s ) Liquidus Temperture TL 217C Time tL above TL 80 s max. 100 s Peak Temperature TP 245 C max. 250 C Time tP within 5C of the specified peak temperature TP - 5K 20 s min. 10 s max. 30 s Ramp-down Rate* TP to 100C 3K/s 6 K / s maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 s; fulfillment for the whole T-range 2012-06-15 12 LB A6SG, LT A6SG Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A 330 (13) 2012-06-15 W Nmin W1 W2 max 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 13 LB A6SG, LT A6SG Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE el LE . see lab e H) nk, (R bla cod y If bar . dit RH mi % hu e ve /60 ed ag C ati rar ck rel 30 _ inf pa < % to ak of 90 urs d ). < ns (pe or urs d , Ho de cte itio Ho urs an bje ing C co 72 nd Ho urs 5 te C su ss 48 e Ho co ce 24 6 da e y 40 be tim C h l pro < tor tim e e or ). 23 tim at t wilnt l wit or fac C Flo s tim at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al d Le ist ure en ref e e 10 ure tim for se ist ale op se for > se , Mo ure 3 ist is or . , is ha se Mo be nk ist nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. s wi 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. dy d e 4 8 ref y is req 2. JE bo e Mo ore tim 16 req : C/ es dit2b a) tim e e St or mi IP ed or g is tim vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) 3. b) baere Flo or da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo Barcode label N RS ins VE ITI TO nta NSUC TIO U g coSEND CO Ais baRE TU MI CThIS SE MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label el M Y DE R 18 -1 -1 +Q P RO UP : G 4 01 4 98 C: 20 00 D/ 00 21 9 (9 D) 21 : H 12 34 O (Q )Q TY : S S em R ic AM o n O d u p ct to o H rs NO TC BA P) 5 14 2 (6 T 11 00 LO PR O D NO : (1 T) (X ) D EM Y 18 R -1 : Q + u L lt S iT Y O T6 P 7 L 6 P -1 G R O U P: (G ) E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R ditio 0 C R 07 PA 7 na RT l TE C KV XT AR M 14 4 D /C :0 (9 D ) 00 0 M RA OS TY :2 )Q (Q A 21 00 21 99 8 o M n O d u p cto to rs (X ) PR O D N O : (1 T) 11 00 LO T 14 2 N O 5 R 34 ic N O : H 12 G O S em S BA TC H 23 :1 (6 P) 23 G e Muster C (G ) M u L lt S iT Y O T6 P 7 L 6 E D Muster L Nns IVEORS ai IT ntNS CT TIO DU U g coSE ON Ais baRE IC M NO :1 E V E L selab . , H) nk de co (R bla r If ba . ity id RH m hu 0% e e /6 d tiv C re ag la re fra ck 30 _ < in pa % k s of to 90 ea s ur d ). < ns or te (p d Ho ururs s , de g itio Ho an bjec co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da y 40 be oc tim e e C or ThISTU th r pr < ll tim SE ct ). O 23 oo r wi nt tim e at l wi fa r M O Fl oo tim s at at le C at e. ica PT l Fl th th va oo r ur O nt ad Fl oo be 4 on es ui if: w ed l re Fl la m ide 5 eq lo g, oc ve l vic is in en de be 24 de or l 5a6 pr Le ve nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al e Le r en re e ed re 10 ois stu ur e tim se fo al op se fo > , M oi r se st ur 3 is is ha se M oi st nk be k, oo . 03 rd g M oi in an in Fl RH g, r-p bla DM ba Ca po If bl th % kinr life is (if . ar ST f p. wi 10 ba to et Jel r th va Ye ar ks s m _ < m ca C ed 1 Ye ee ur t d, iredi Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e ou 4 8 re ed re qu JE 2. bo ity is M or tim e e 16 re C/ : es id 2b r a) St tim m IP ed oo r or g is tim e vic b) e r Hu Fl oo en tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 Fl If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l e Le Ba te ur e Le ve Le Da oist stur e ur M oi st ture M oi M ois M Q : -1 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Bi Bi n1 Bi n2 : Pn3 : 120 Barcode label Packing Sealing label Dimensions of transportation box in mm (inch) Breite / Width 200 5 (7,874 0,1968) 2012-06-15 Lange / length Hohe / height 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 14 OHA02044 LB A6SG, LT A6SG Revision History: 2012-06-15 Previous Version: 2012-03-16 Page Subjects (major changes since last revision) Date of change 3 introduction of Forward current min. 2005-12-20 9 Lifetime table 2006-01-16 all true green added 2006-07-04 1,12 OS-IN-2007-026 2007-10-19 2 ordering code changed 2011-01-19 all final datasheet created 2011-01-19 12 OS-PCN-2012-008 2012-03-16 10 OS-IN-2012-017 2012-06-15 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 16 may only be used in life-support devices or systems10) page 16 with the express written approval of OSRAM OS. 2012-06-15 15 LB A6SG, LT A6SG Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Mae werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 10) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2012-06-15 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 16 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.