VO618A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5000 VRMS, 110 C Rated FEATURES A 1 4 C C 2 3 E * Operating temperature from - 55 C to + 110 C * Good CTR linearity depending on forward current * Isolation test voltage, 5000 VRMS * High collector emitter voltage, VCEO = 80 V * Low saturation voltage * Fast switching times * Low CTR degradation * Temperature stable * Low coupling capacitance * End stackable, 0.100" (2.54 mm) spacing * High common mode interference immunity * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DIP-4 th_01 DESCRIPTION The 110 C rated VO618A feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. Note ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. APPLICATIONS Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC. Specifications subject to change. * * * * * AC adapter SMPS PLC Factory automation Game consoles AGENCY APPROVALS * UL1577, file no. E52744 * cUL tested to CSA 22.2 bulletin 5A * DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 (pending), available with option 1 * BSI IEC 60950; IEC 60065 * FIMKO ORDERING INFORMATION V O 6 1 8 A - PART NUMBER # CTR BIN X 0 # PACKAGE OPTION # DIP-4 Option 6 7.62 mm 10.16 mm T TAPE AND REEL Option 7 > 8 mm CTR (%) AGENCY CERTIFIED/PACKAGE UL, cUL, BSI, FIMKO DIP-4 VDE, UL, cUL, BSI, FIMKO 1 mA 50 to 600 63 to 125 100 to 200 160 to 320 VO618A VO618A-2 VO618A-3 VO618A-4 160 to 320 50 to 600 63 to 125 100 to 200 DIP-4, 400 mil, option 6 - - - - SMD-4, option 7 - - VO618A-3X017T - Note * Additional options may be possible, please contact sales office. Rev. 1.1, 24-Jan-12 Document Number: 83432 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current tp 10 s IFSM 2.5 A LED power dissipation at 25 C Pdiss 70 mW Collector emitter voltage VCEO 80 V Emitter collector voltage VECO 7 V IC 50 mA tp/T = 0.5, tp 10 ms ICM 100 mA at 25 C Pdiss 150 mW OUTPUT Collector current Collector peak current Ouput power dissipation COUPLER Isolation test voltage (RMS) VISO 5000 VRMS Operation temperature t=1s Tamb - 55 to + 110 C Storage temperature range Tstg - 55 to + 150 C Tsld 260 C 2 mm from case, 10 s Soldering temperature (1) Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Forward voltage IF = 5 mA VF 1 1.15 1.65 V Reverse current VR = 6 V IR 0.01 10 A VR = 0 V, f = 1 MHz Cj 13 VCE = 10 V ICEO 10 INPUT Junction capacitance pF OUTPUT Collector emitter leakage current Collector emitter capacitance 200 nA VCE = 5 V, f = 1 MHz CCE Collector emitter breakdown voltage IC = 1 mA BVCEO 80 V Emitter collector breakdown voltage IE = 100 A BVECO 7 V IF = 1 mA, IC = 2.5 mA VCEsat 0.25 f = 1 MHz CC 0.4 5.2 pF COUPLER Collector emitter saturation voltage Coupling capacitance 0.4 V pF Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER IC/IF Rev. 1.1, 24-Jan-12 TEST CONDITION IF = 1 mA, VCE = 5 V PART SYMBOL MIN. MAX. UNIT VO618A CTR 50 TYP. 600 % VO618A-2 CTR 63 125 % VO618A-3 CTR 100 200 % VO618A-4 CTR 160 320 % Document Number: 83432 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION CTR BIN SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED IF = 1 mA, VCC = 5 V, RL = 75 Rise and fall time Turn-on time IF = 1 mA, VCC = 5 V, RL = 75 Turn-off time IF = 1 mA, VCC = 5 V, RL = 75 Cut-off frequency tr, tf 2 s ton 3 s toff 2.3 s fctr 100 kHz SATURATED IF = 2 mA 1 ton 3 s 2 ton 4.2 s 3 ton 4.2 s IF = 0.5 mA 4 ton 6 s IF = 2 mA 1 tr 2 s 2 tr 3 s 3 tr 3 s IF = 0.5 mA 4 tr 4.6 s IF = 2 mA 1 toff 18 s 2 toff 23 s IF = 1 mA Turn-on time IF = 1 mA Rise time SATURATED IF = 1 mA Turn-off time 3 toff 23 s IF = 0.5 mA 4 toff 25 s IF = 2 mA 1 tf 11 s 2 tf 14 s 3 tf 14 s 4 tf 15 s IF = 1 mA Fall time IF = 0.5 mA IF +5V IF IF 0 +5V I F = 1 mA 0 R G = 50 tp = 0.01 T IC R G = 50 tp = 0.01 T t p = 50 s t p = 50 s Channel I Channel II 50 Channel I Oscilloscope R L = 1 M C L = 20 pF Channel II RL 50 Oscilloscope R L 1 M C L 20 pF 1 k 95 10843-1 95 10804-3 Fig. 1 - Test Circuit, Non-Saturated Operation Rev. 1.1, 24-Jan-12 Fig. 2 - Test Circuit, Saturated Operation Document Number: 83432 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors IF 0 tp IC t 100 % 90 % 10 % 0 tr td tp td tr t on (= td + tr) t tf t off ts t on ts tf t off (= ts + tf) Pulse duration Delay time Rise time Turn-on time Storage time Fall time Turn-off time 96 11698 Fig. 3 - Switching Times SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. VIO = 500 V RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 VIO = 500 V, Tamb = 150 C (construction test only) RIO 109 VIOTM 8 Recurring peak voltage VIORM 890 V ISI 130 mA Power dissipation PSO 265 mW Safety temperature TSI 150 Insulation resistance Rated impulse voltage Maximum working voltages Forward current TYP. MAX. UNIT kV C Creepage distance 8.0 mm Isolation distance 0.4 mm Note * As per IEC 60747-5-5, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 12 1.6 Tamb = 25 C 1.4 1.3 1.2 IF = 5 mA Tamb = 0 C Tamb = - 40 C Tamb = - 55 C 1.1 Tamb = 50 C 1.0 Tamb = 75 C 0.9 0.8 Tamb = 100 C Tamb = 110 C IC - Collector Current (mA) VF - Forward Voltage (V) 1.5 10 8 6 4 IF = 2 mA 2 IF = 1 mA 0.7 0.6 0.1 0 1 10 100 0 0.1 0.2 0.3 0.4 IF - Forward Current (mA) VCE - Collector Emitter Voltage (sat) (V) Fig. 4 - Forward Voltage vs. Forward Current Fig. 5 - Collector Current vs. Collector Emitter Voltage (sat) Rev. 1.1, 24-Jan-12 Document Number: 83432 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors 10 000 0 VCE = 5 V IF = 0 mA - 20 VCE = 40 V 1000 - 40 100 VCE = 24 V 10 VCE = 12 V 1 Phase (deg) ICE0 - Leakage Current (nA) 100 000 - 60 - 80 - 100 0.1 - 120 0.01 0.001 - 60 - 40 - 20 0 - 140 20 40 60 80 100 120 1 10 1000 100 Tamb - Ambient Temperature (C) f - Frequency (kHz) Fig. 6 - Leakage Current vs. Ambient Temperature Fig. 9 - CTR Frequency vs. Phase Angle 1000 VCE = 5 V IF = 5 mA 2.0 1.5 IF = 1 mA 1.0 0.5 0 - 60 - 40 - 20 0 20 VCC = 5 V fCTR - CTR Frequency (kHz) CTRNorm - Normalized CTR (NS) 2.5 40 60 80 100 120 100 10 1 0.1 1 10 100 Tamb - Ambient Temperature (C) IC - Collector Current (mA) Fig. 7 - Normalized CTR (NS) vs. Ambient Temperature Fig. 10 - CTR Frequency vs. Collector Current CTRNorm - Normalized CTR (sat) 2.5 VCE = 0.4 V IF = 5 mA 2.0 1.5 IF = 1 mA 1.0 0.5 0 - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 8 - Normalized CTR (sat) vs. Ambient Temperature Rev. 1.1, 24-Jan-12 Document Number: 83432 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO618A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6.5 0.5 Pin 1 identifier 7.62 0.3 4.58 0.5 0.85 0.1 3.5 0.3 0.5 typ. 0.26 3.3 0.5 2.8 0.5 0.5 0.1 2.54 0.25 i178027-10 7.62 to 9.98 Option 6 Option 7 7.62 typ. 7.62 typ. + 0.25 - 0.3 0.35 3.5 0.3 3.5 0.3 0.1 min. 8 min. 2.7 min. 0.6 min. 10.16 0.3 0.76 2.54 10.16 typ. 1.52 8 min. 11.05 20802-30 1.78 R 0.25 PACKAGE MARKING VO618A-3 V YWW 25 Notes * The VDE logo is only marked on option 1 parts. Option information is not marked on the part. * Tape and reel suffix (T) is not part of the package marking. Rev. 1.1, 24-Jan-12 Document Number: 83432 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000