VO618A-3X017T - Vishay Presicion Group

VO618A

www.vishay.com Vishay Semiconductors

Rev. 1.1, 24-Jan-12 1Document Number: 83432

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, High Reliability,

5000 VRMS, 110 °C Rated

DESCRIPTION

The 110 °C rated VO618A feature a high current transfer

ratio, low coupling capacitance and high isolation voltage.

These couplers have a GaAs infrared diode emitter, which is

optically coupled to a silicon planar phototransistor

detector, and is incorporated in a plastic DIP-4 package.

The coupling devices are designed for signal transmission

between two electrically separated circuits.

The couplers are end-stackable with 2.54 mm spacing.

Creepage and clearance distances of > 8.0 mm are

achieved with option 6. This version complies with

IEC 60950 (DIN VDE 0805) for reinforced insulation up to an

operation voltage of 400 VRMS or DC. Specifications subject

to change.

FEATURES

• Operating temperature from - 55 °C to + 110 °C

• Good CTR linearity depending on forward

current

• Isolation test voltage, 5000 VRMS

• High collector emitter voltage, VCEO = 80 V

• Low saturation voltage

• Fast switching times

• Low CTR degradation

• Temperature stable

• Low coupling capacitance

• End stackable, 0.100" (2.54 mm) spacing

• High common mode interference immunity

• Compliant to RoHS Directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

Note

** Please see document “Vishay Material Category Policy”:

www.vishay.com/doc?99902

APPLICATIONS

•AC adapter

•SMPS

•PLC

• Factory automation

• Game consoles

AGENCY APPROVALS

• UL1577, file no. E52744

• cUL tested to CSA 22.2 bulletin 5A

• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5

(pending), available with option 1

• BSI IEC 60950; IEC 60065

•FIMKO

Note

• Additional options may be possible, please contact sales office.

DIP-4 th_01

ORDERING INFORMATION

VO6 1 8A - #X0 # # T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/PACKAGE CTR (%)

1 mA

UL, cUL, BSI, FIMKO 50 to 600 63 to 125 100 to 200 160 to 320

DIP-4 VO618A VO618A-2 VO618A-3 VO618A-4

VDE, UL, cUL, BSI, FIMKO 50 to 600 63 to 125 100 to 200 160 to 320

DIP-4, 400 mil, option 6 - - - -

SMD-4, option 7 - - VO618A-3X017T -

10.16 mm

Option 6

7.62 mm

DIP-4

> 8 mm

Option 7

VO618A

www.vishay.com Vishay Semiconductors

Rev. 1.1, 24-Jan-12 2Document Number: 83432

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not

implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

maximum ratings for extended periods of the time can adversely affect reliability.

(1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through

hole devices (DIP).

Note

• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements.

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

Reverse voltage VR6V

Forward current IF60 mA

Forward surge current tp ≤ 10 μs IFSM 2.5 A

LED power dissipation at 25 °C Pdiss 70 mW

OUTPUT

Collector emitter voltage VCEO 80 V

Emitter collector voltage VECO 7V

Collector current IC50 mA

Collector peak current tp/T = 0.5, tp ≤ 10 ms ICM 100 mA

Ouput power dissipation at 25 °C Pdiss 150 mW

COUPLER

Isolation test voltage (RMS) t = 1 s VISO 5000 VRMS

Operation temperature Tamb - 55 to + 110 °C

Storage temperature range Tstg - 55 to + 150 °C

Soldering temperature (1) 2 mm from case, ≤ 10 s Tsld 260 °C

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

INPUT

Forward voltage IF = 5 mA VF1 1.15 1.65 V

Reverse current VR = 6 V IR0.01 10 μA

Junction capacitance VR = 0 V, f = 1 MHz Cj13 pF

OUTPUT

Collector emitter leakage current VCE = 10 V ICEO 10 200 nA

Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE 5.2 pF

Collector emitter breakdown voltage IC = 1 mA BVCEO 80 V

Emitter collector breakdown voltage IE = 100 μA BVECO 7V

COUPLER

Collector emitter saturation voltage IF = 1 mA, IC = 2.5 mA VCEsat 0.25 0.4 V

Coupling capacitance f = 1 MHz CC0.4 pF

CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

IC/IFIF = 1 mA, VCE = 5 V

VO618A CTR 50 600 %

VO618A-2 CTR 63 125 %

VO618A-3 CTR 100 200 %

VO618A-4 CTR 160 320 %

VO618A

www.vishay.com Vishay Semiconductors

Rev. 1.1, 24-Jan-12 3Document Number: 83432

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 1 - Test Circuit, Non-Saturated Operation Fig. 2 - Test Circuit, Saturated Operation

SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION CTR BIN SYMBOL MIN. TYP. MAX. UNIT

NON-SATURATED

Rise and fall time IF = 1 mA, VCC = 5 V, RL = 75 Ωtr, tf2μs

Turn-on time IF = 1 mA, VCC = 5 V, RL = 75 Ωton 3μs

Turn-off time toff 2.3 μs

Cut-off frequency IF = 1 mA, VCC = 5 V, RL = 75 Ωfctr 100 kHz

SATURATED

Turn-on time

IF = 2 mA 1 ton 3μs

IF = 1 mA 2t

on 4.2 μs

IF = 0.5 mA 4 ton 6μs

Rise time

IF = 2 mA 1 tr2μs

IF = 1 mA 2t

r3μs

IF = 0.5 mA 4 tr4.6 μs

SATURATED

Turn-off time

IF = 2 mA 1 toff 18 μs

IF = 1 mA 2t

off 23 μs

IF = 0.5 mA 4 toff 25 μs

Fall time

IF = 2 mA 1 tf11 μs

IF = 1 mA 2t

f14 μs

IF = 0.5 mA 4 tf15 μs

Channel I

Channel II

95 10804-3

= 50 Ω

= 50 µs

T= 0.01

+ 5 V

50 ΩRL

Oscilloscope

= 1 MΩ

= 20 pF

Channel I

Channel II

95 10843-1

RG= 50 Ω

tp= 50 µs

T= 0.01

+ 5 V

50 Ω1 kΩ

IF= 1 mA

Oscilloscope

≥

CL20 pF

1 MΩ

≤

VO618A

www.vishay.com Vishay Semiconductors

Rev. 1.1, 24-Jan-12 4Document Number: 83432

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Switching Times

Note

• As per IEC 60747-5-5, § 7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with

the safety ratings shall be ensured by means of protective circuits.

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

Fig. 4 - Forward Voltage vs. Forward Current Fig. 5 - Collector Current vs. Collector Emitter Voltage (sat)

tpt

10 %

90 %

100 %

ton

tstf

toff

tpPulse duration

tdDelay time

trRise time

ton (= td + tr) Turn-on time

tsStorage time

tfFall time

toff (= ts + tf) Turn-off time

96 11698

SAFETY AND INSULATION RATINGS

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Insulation resistance

VIO = 500 V RIO 1012 Ω

VIO = 500 V, Tamb = 100 °C RIO 1011 Ω

VIO = 500 V, Tamb = 150 °C

(construction test only) RIO 109Ω

Rated impulse voltage VIOTM 8kV

Maximum working voltages Recurring peak voltage VIORM 890 V

Forward current ISI 130 mA

Power dissipation PSO 265 mW

Safety temperature TSI 150 °C

Creepage distance 8.0 mm

Isolation distance 0.4 mm

0.6

0.8

0.9

1.0

1.1

1.2

1.3

1.4

1.6

0.1 1 10 100

IF - Forward Current (mA)

- Forward Voltage (V)

Tamb = - 55 °C

1.5

0.7

Tamb = - 40 °C

Tamb = 0 °C

Tamb = 25 °C

Tamb = 50 °C

Tamb = 75 °C

Tamb = 100 °C

Tamb = 110 °C

00.4

VCE - Collector Emitter Voltage (sat) (V)

- Collector Current (mA)

0.30.20.1

IF = 5 mA

IF = 2 mA

IF = 1 mA

VO618A

www.vishay.com Vishay Semiconductors

Rev. 1.1, 24-Jan-12 5Document Number: 83432

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 6 - Leakage Current vs. Ambient Temperature

Fig. 7 - Normalized CTR (NS) vs. Ambient Temperature

Fig. 8 - Normalized CTR (sat) vs. Ambient Temperature

Fig. 9 - CTR Frequency vs. Phase Angle

Fig. 10 - CTR Frequency vs. Collector Current

0.001

0.01

0.1

100

1000

100 000

- 60 120

Tamb - Ambient Temperature (°C)

CE0

- Leakage Current (nA)

10 000

= 40 V

- 40 100806040200- 20

= 0 mA

= 12 V

= 24 V

0.5

1.0

1.5

2.5

- 60 120

Tamb - Ambient Temperature (°C)

CTR

Norm

- Normalized CTR (NS)

2.0

- 40 100806040200- 20

IF = 5 mA

IF = 1 mA

VCE = 5 V

0.5

1.0

1.5

2.5

- 60 120

Tamb - Ambient Temperature (°C)

CTR

Norm

- Normalized CTR (sat)

2.0

- 40 100806040200- 20

IF = 5 mA

IF = 1 mA

VCE = 0.4 V

- 140

- 120

- 100

- 80

1 1000

f - Frequency (kHz)

Phase (deg)

- 20

10 100

= 5 V

- 40

- 60

1000

0.1 100

IC - Collector Current (mA)

CTR

- CTR Frequency (kHz)

100

110

VCC = 5 V

VO618A

www.vishay.com Vishay Semiconductors

Rev. 1.1, 24-Jan-12 6Document Number: 83432

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE DIMENSIONS in millimeters

PACKAGE MARKING

Notes

• The VDE logo is only marked on option 1 parts. Option information is not marked on the part.

• Tape and reel suffix (T) is not part of the package marking.

i178027-10

6.5 ± 0.5

Pin 1 identier

0.26

7.62 to 9.98

7.62 ± 0.3

4.58 ± 0.5

2.54 ± 0.25

0.5 ± 0.1

0.85 ± 0.1

2.8 ± 0.5 3.3 ± 0.5

3.5 ± 0.3

0.5 typ.

20802-30

2.54

1.78 0.76

8 min.

1.52

11.05

R 0.25

10.16 typ.

7.62 typ.

Option 6

3.5 ± 0.3

0.1 min.

2.7 min.

8 min.

7.62 typ.

3.5 ± 0.3

0.6 min.

10.16 ± 0.3

Option 7

0.35

+ 0.25

- 0.3

VO618A-3

V YWW 25

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.