Model 3038 Accelerometer Miniature Piezoresistive MEMS SMD Accelerometer Hermetically Sealed 10,000g Shock Protection The Model 3038 is a hermetically sealed SMD accelerometer designed for high performance applications. The accelerometer incorporates a gas-damped piezoresistive MEMS sensing element providing outstanding long-term stability. The model 3038 provides a millivolt output signal and features mechanical overload stops that provide shock protection to loads greater than 10,000g. dimensions FEATURES 50g to 6000g Dynamic Ranges Board Mountable Accelerometer Low Power Consumption Hermetic LCC Package DC Response, Gas Damping 5000Hz Bandwidth APPLICATIONS Harsh Environments Vibration & Shock Monitoring Impact Testing Embedded Applications Instrumentation Machinery Model 3038 Rev E 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 08/14/2013 t&m@meas-spec.com Model 3038 Accelerometer performance specifications All values are typical at +24C, 100Hz and 5Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Standard product parameters are described in PSC-1002 for Embedded DC Accelerometers. Parameters DYNAMIC Range (g) 1 Sensitivity (mV/g) Frequency Response (Hz) Natural Frequency (Hz) Non-Linearity (%FSO) Transverse Sensitivity (%) Damping Ratio 3 Shock Limit (g) 50 1.0 0-1000 4000 1 <3 0.4-0.9 10000 ELECTRICAL Zero Acceleration Output (mV) Excitation Voltage (Vdc) Input Resistance () Output Resistance () Insulation Resistance (M) Residual Noise (V RMS) Ground Isolation 25 2 to 10 2400-6500 2400-6500 >100 10 Isolated from Mounting Surface Differential ENVIRONMENTAL Thermal Zero Shift (%FSO/C) Thermal Sensitivity Shift (%/C) Operating Temperature (C) Compensated Temperature (C) Storage Temperature (C) Humidity -0.09 -0.15 -55 to 125 Uncompensated -55 to 125 Hermetically Sealed Typical Typical PHYSICAL Case Material Weight (grams) Mounting Ceramic 0.6 Solder 1 2 3 Notes 100 0.50 0-1200 6000 1 <3 0.4-0.9 10000 200 0.40 0-1400 8000 1 <3 0.2-0.6 10000 500 0.20 0-2000 15000 1 <3 0.2-0.6 10000 2000 0.08 0-4500 24000 1 <3 0.05-0.30 10000 6000 0.05 0-5000 26000 2 <3 0.05-0.30 10000 @5Vdc Excitation 5% <1 Typical @50Vdc Maximum Output is ratiometric to excitation voltage. 10Vdc excitation will increase output by a factor of 2x. The maximum recommended soldering temperature is +260C 10,000g shock limit in normal axis; 5,000g in transverse axes Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 100Hz and 5Vdc Excitation The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. ordering info PART NUMBERING Model Number+Range 3038-GGGG-ZZ l l_____Options (otherwise leave blank) l_______Range (0100 is 100g) Optional Dash Numbers -01 10Vdc Calibration Example: 3038-0100 Model 3038, 100g Range, No Options Model 3038 Rev E 32 Journey Ste. 150 Aliso Viejo, CA 92656 www.meas-spec.com 949-716-5377 08/14/2013 t&m@meas-spec.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 3038-0500