CHEMTRONICS TDS # CP410 Technical Data Sheet Optic Prep Presaturated Wipe PRODUCT DESCRIPTION Optic Prep Presaturated Wipes are high quality premoistened lens-grade tissues for cleaning optical surfaces. These highly effective cleaning wipes are ideal for cleaning and polishing optical surfaces, lenses, photographic equipment, CRT and LCD screens and instruments. Optic Prep is safe for use on Fiber Optic Connectors. Optic Prep Presaturated Wipes contain ultra-pure isopropyl alcohol (65% IPA / 35% Pure Water) on an ultra-soft, lens-grade tissue. Plastic Safe Dries Fast Leaves No Residue Nonabrasive Upper Ozone Safe; CFC/HCFC Free TYPICAL APPLICATIONS Optic Prep Presaturated Wipes cleans: Plastic and glass lenses Machine optics and alignment lenses Fiber Optic Connectors CRT's and LCD's Microscopes Copier optics and prisms Mirrors TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Specific Gravity Solubility in Water 0.87 Soluble Evaporation Rate <1 (Ether = 1) Appearance Clear, Colorless Liquid Flash Point (TCC) 72o F Percent Volatile 100% Shelf life 2 years COMPATIBILITY Optic Prep Presaturated Wipes are generally compatible with most plastics, glass and metals. As with any chemical product, component compatibility must be determined on a non-critical area prior to use. Check compatibility with all non-glare coatings. Material Aluminum Buna-N CPVC Epoxy Neoprene Noryl Phenolic Cross-Linked PE Polycarbonate Polypropylene Polystyrene PVC Teflon Tygon Viton Compatibility Excellent Good Excellent Excellent Good Excellent Excellent Good Good Good Fair Good Excellent Good Excellent ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. 0.0% 0.0% 0.0% VOC HFC ODP 65% 0.0% 0.0 CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown are the content by weight. Ozone depletion potential (ODP) is determined in accordance with the Montreal Protocol and U.S. Clean Air Act of 1990. The ODP of this product is zero. AVAILABILITY CP410 50 Premoistened Wipes NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. USAGE INSTRUCTIONS For industrial use only. Chemtronics is a registered trademark of Chemtronics. All rights reserved. Optic Prep is a trademark of Chemtronics. All rights reserved. Read MSDS carefully prior to use. Remove wipe from packets and lightly wipe away any dust or contaminants from surfaces. Allow surface to dry completely before use. TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. Call toll free at: 1-800-TECH401. CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 REV. A (08/13) 1-770-424-4888 DISTRIBUTED BY: