Surface Mount Silicon Bridge Rectifiers RS201-G thru RS207-G REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes "-G" : RoHS Device RS-2 .709(19.0) .669(17.0) .078(2.0)*45 FEATURES - Surge overload rating -50 amperes peak - Ideal for printed circuit board .551(14.0) .512(13.0) - Reliable low cost construction utilizong molded plastic .610(15.5) .571(14.5) technique results in expensive product - Mounting position :Any .035(0.9)DIA .028(0.7)TYP. .750 MIN. (19.0) .160(4.1) .140(3.6) .276(7.0) .236(6.0) .148(3.75) .108(2.75) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL RS201 RS202 RS203 RS204 RS205 RS206 RS207 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.3759.5mm) Lead Lengths @TA=40 I(AV) 2.0 A IFSM 50 A I2t 15.0 A2s VF 1.1 V Peak Forward Surge Current , 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) I2t Rating for Fusing (t8.3ms) Maximum Forward Voltage Drop Per Element at 2.0A Peak Maximum DC Reverse Current at Rated TJ=25 DC Blocking Voltage TJ=100 Typical Junction Capacitance Per Element (Note1) Operating Temperature Range Storage Temperature Range 10.0 A 1.0 mA CJ 30 pF TJ -55 to +125 TSTG -55 to +150 IR Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. MDS0905006A Page 1 Surface Mount Silicon Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES RS201-G thru RS207-G FIG.2-MXIMUM NON-REPETITIVE SURGE CURRENT 2.0 50 PEAK FORWARD SURGE CURRENT, AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0 100 50 150 40 30 20 Pulse Wldth 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 10 0 1 2 INSTANTANEOUS FORWARD CURRENT,(A) INSTANTANCEOUS REVERSE CURRENT, MICRAMPERES T J=100 1.0 0.1 T J=25 80 100 100 1.0 0.1 T J=25C PULSE WIDTH:300us 2% DUTY CYCLE 0.01 60 50 10 10 40 20 FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 10 NUMBER OFCYCLES AT 60Hz AMBIENT TEMPERATURE , 0 5 120 140 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE FIG.5-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 60 CAPACITANCE,(pF) 40 20 10 6.0 4.0 T J=25C, f=1MHZ Vsig=50m p-p 2.0 1.0 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 100 REVERSE VOLTAGE,VOLTS MDS0905006A Page 2