HMI Components Edition 09/2016 Series 92 Characteristics Functions Market segments The Series 92 with its short stroke pushbuttons, making it especially suited for: The Series 92 incorporates the following functions: The EAO Series 92 is especially suited for applications in the segments: PCB mounting Indicator Pushbutton Illuminated pushbutton Machinery and Automation Medicinal technology Laboratory and measuring equipment This series can be used to replace a membrane keypad if only a few buttons are needed. Please refer to the EAO website to obtain detailed information regarding this series www.products.eao.com Configure a product to your exact needs and request a quotation. Content 92 Overview PCB pushbuttons Indicator 4 Pushbutton 6 Illuminated pushbutton 7 Indicator actuator 9 Pushbutton actuator 10 Illuminated pushbutton actuator 12 Accessories 14 Drawings 21 Technical data 22 Marking 23 Application guidelines 24 Index 27 3 92 PCB pushbuttons Indicator 4 max. Equipment consisting of (schematic overview) Lens Actuator Bezel 3.4 IP 40 4 IP 67 12 3.6 Fixing nut Product can differ from the current configuration. Additional Information Dimensions Mounting flange page 19 LED page 18 Illumination element page 16 Transparent lens and pressure plate * IP 67 version without bezel * NJO NJO Each Part Number listed below includes all the black components shown in the 3D-drawing. To obtain a complete unit, please select the red components from the pages shown. Mounting cut-outs Front protection Front Pressure plate Lens Part No. Weight Indicator actuator, Front dimension 18.8 x 18.8 mm IP 67 Plastic white Plastic black Plastic red 92-043.200 0.003 kg Plastic orange 92-043.300 0.003 kg Plastic yellow 92-043.400 0.003 kg Plastic green 92-043.500 0.003 kg Plastic blue 92-043.600 0.003 kg Plastic colourless 92-043.700 0.003 kg Plastic red 92-143.200 0.003 kg Plastic orange 92-143.300 0.003 kg Plastic yellow 92-143.400 0.003 kg Plastic green 92-143.500 0.003 kg Plastic blue 92-143.600 0.003 kg Plastic colourless 92-143.700 0.003 kg Indicator actuator, Front dimension 18.4 x 18.4 mm IP 40 4 Plastic white Plastic smoked 92-058.100 0.003 kg Plastic red 92-058.200 0.003 kg Plastic orange 92-058.300 0.003 kg Plastic yellow 92-058.400 0.003 kg Plastic green 92-058.500 0.003 kg Plastic blue 92-058.600 0.003 kg Plastic colourless 92-058.700 0.003 kg PCB pushbuttons Front protection Front IP 40 Plastic black Pressure plate 92 Lens Part No. Weight Plastic smoked 92-158.100 0.003 kg Plastic red 92-158.200 0.003 kg Plastic orange 92-158.300 0.003 kg Plastic yellow 92-158.400 0.003 kg Plastic green 92-158.500 0.003 kg Plastic blue 92-158.600 0.003 kg Plastic colourless 92-158.700 0.003 kg 5 92 PCB pushbuttons Pushbutton 4 max. Equipment consisting of (schematic overview) Lens Actuator Bezel 3.4 IP 40 4 IP 67 12 3.6 Fixing nut Product can differ from the current configuration. Dimensions Additional Information Mounting flange page 19 Switching element page 16 * IP 67 version without bezel Lens opaque * NJO NJO Each Part Number listed below includes all the black components shown in the 3D-drawing. To obtain a complete unit, please select the red components from the pages shown. Front protection Front Pressure plate Lens Switching action Part No. Wiring diagram Mounting cut-outs Weight Pushbutton actuator, Front dimension 18.8 x 18.8 mm IP 67 Plastic white Plastic black Plastic black B 92-341.000 1 0.002 kg Plastic grey B 92-341.800 1 0.002 kg Plastic black B 92-441.000 1 0.002 kg Plastic grey B 92-441.800 1 0.002 kg Pushbutton actuator, Front dimension 18.4 x 18.4 mm IP 40 Plastic white Plastic black Switching action: B = Momentary Wiring diagram 1 6 Plastic black B 92-356.000 1 0.002 kg Plastic grey B 92-356.800 1 0.002 kg Plastic white B 92-356.900 1 0.002 kg Plastic black B 92-456.000 1 0.002 kg Plastic grey B 92-456.800 1 0.002 kg Plastic white B 92-456.900 1 0.002 kg PCB pushbuttons 92 Illuminated pushbutton 4 max. Equipment consisting of (schematic overview) Lens Actuator Bezel 3.4 IP 40 4 IP 67 12 3.6 Fixing nut Dimensions Mounting flange Product can differ from the current configuration. page 19 Additional Information NJO LED Switching element page 16 Each Part Number listed below includes all the black components shown in the 3D-drawing. NJO page 18 * Transparent lens and pressure plate * IP 67 version without bezel To obtain a complete unit, please select the red components from the pages shown. Front protection Front Pressure plate Lens Switching action Part No. Wiring diagram Mounting cut-outs Weight Illuminated pushbutton actuator, Front dimension 18.8 x 18.8 mm IP 67 Plastic white Plastic black Plastic red B 92-343.200 1 0.003 kg Plastic orange B 92-343.300 1 0.003 kg Plastic yellow B 92-343.400 1 0.003 kg Plastic green B 92-343.500 1 0.003 kg Plastic blue B 92-343.600 1 0.003 kg Plastic colourless B 92-343.700 1 0.003 kg Plastic red B 92-443.200 1 0.003 kg Plastic orange B 92-443.300 1 0.003 kg Plastic yellow B 92-443.400 1 0.003 kg Plastic green B 92-443.500 1 0.003 kg Plastic blue B 92-443.600 1 0.003 kg Plastic colourless B 92-443.700 1 0.003 kg Illuminated pushbutton actuator, Front dimension 18.4 x 18.4 mm IP 40 Plastic white Plastic smoked B 92-358.100 1 0.003 kg Plastic red B 92-358.200 1 0.003 kg Plastic orange B 92-358.300 1 0.003 kg Plastic yellow B 92-358.400 1 0.003 kg Plastic green B 92-358.500 1 0.003 kg Plastic blue B 92-358.600 1 0.003 kg Plastic colourless B 92-358.700 1 0.003 kg 7 PCB pushbuttons Front protection Front IP 40 Plastic black Switching action: B = Momentary Wiring diagram 1 8 Pressure plate Lens Switching action Part No. Wiring diagram 92 Weight Plastic smoked B 92-458.100 1 0.003 kg Plastic red B 92-458.200 1 0.003 kg Plastic orange B 92-458.300 1 0.003 kg Plastic yellow B 92-458.400 1 0.003 kg Plastic green B 92-458.500 1 0.003 kg Plastic blue B 92-458.600 1 0.003 kg Plastic colourless B 92-458.700 1 0.003 kg PCB pushbuttons 92 Indicator actuator IP 67 4 max. Equipment consisting of (schematic overview) Pressure plate page 14 Front bezel Actuator 3.4 IP 40 4 IP 67 Fixing nut 12 3.6 Dimensions page 18 Illumination element page 16 Each Part Number listed below includes all the black components shown in the 3D-drawing. NJO LED NJO page 19 Mounting flange Product can differ from the current configuration. To obtain a complete unit, please select the red components from the pages shown. Mounting cut-outs Front Part No. Weight 92-140.000 0.003 kg Indicator actuator IP 67, Front dimension 18.8 x 18.8 mm Plastic black 9 92 PCB pushbuttons Pushbutton actuator IP 40 4 max. Equipment consisting of (schematic overview) Lens page 14 Actuator 3.4 IP 40 4 IP 67 Product can differ from the current configuration. 12 Bezel 3.6 Dimensions page 15 Fixing nut NJO NJO Mounting flange page 19 Switching element page 16 Each Part Number listed below includes all the black components shown in the 3D-drawing. To obtain a complete unit, please select the red components from the pages shown. Front Switching action Part No. Wiring diagram Mounting cut-outs Weight Pushbutton actuator IP 40, Front dimension 18.4 x 18.4 mm Plastic white B 92-350.000 1 0.003 kg Plastic black B 92-450.000 1 0.003 kg Switching action: B = Momentary Wiring diagram 1 10 PCB pushbuttons 92 Pushbutton actuator IP 67 4 max. Equipment consisting of (schematic overview) Pressure plate page 14 Front bezel Actuator 3.4 IP 40 4 IP 67 Fixing nut 12 3.6 Dimensions page 16 NJO Switching element NJO page 19 Mounting flange Product can differ from the current configuration. Each Part Number listed below includes all the black components shown in the 3D-drawing. To obtain a complete unit, please select the red components from the pages shown. Front Switching action Part No. Wiring diagram Mounting cut-outs Weight Pushbutton actuator IP 67, square 18.8 x 18.8 mm Plastic white B 92-340.000 1 0.003 kg Plastic black B 92-440.000 1 0.003 kg Switching action: B = Momentary Wiring diagram 1 11 92 PCB pushbuttons Illuminated pushbutton actuator IP 40 4 max. Equipment consisting of (schematic overview) Lens page 14 Actuator 3.4 IP 40 4 IP 67 Product can differ from the current configuration. 12 Bezel 3.6 Dimensions page 15 Fixing nut NJO NJO page 19 LED page 18 Switching element page 16 Each Part Number listed below includes all the black components shown in the 3D-drawing. To obtain a complete unit, please select the red components from the pages shown. Wiring diagram Mounting cut-outs Mounting flange Weight Plastic white B 92-350.000 1 0.003 kg Plastic black B 92-450.000 1 0.003 kg Front Switching action Part No. Illuminated pushbutton actuator IP 40, Front dimension 18.4 x 18.4 mm Switching action: B = Momentary Wiring diagram 1 12 PCB pushbuttons 92 Illuminated pushbutton actuator IP 67 4 max. Equipment consisting of (schematic overview) Pressure plate page 14 Front bezel Actuator 3.4 IP 40 4 IP 67 Fixing nut 12 3.6 Dimensions page 18 Switching element page 16 Each Part Number listed below includes all the black components shown in the 3D-drawing. NJO LED NJO page 19 Mounting flange Product can differ from the current configuration. Mounting cut-outs Wiring diagram To obtain a complete unit, please select the red components from the pages shown. Weight Plastic white B 92-340.000 1 0.003 kg Plastic black B 92-440.000 1 0.003 kg Front Switching action Part No. Illuminated pushbutton actuator IP 40, square 18.8 x 18.8 mm Switching action: B = Momentary Wiring diagram 1 13 92 Accessories Front Lens plate IP 67 Additional Information * Material plastic Product attribute Dimension Pressure plate Part No. Weight black opaque 92-941.000 0.001 kg grey opaque 92-941.800 0.001 kg red transparent 92-941.200 0.001 kg orange transparent 92-941.300 0.001 kg yellow transparent 92-941.400 0.001 kg green transparent 92-941.500 0.001 kg blue transparent 92-941.600 0.001 kg colourless transparent 92-941.700 0.001 kg Lens Part No. Weight Lens plate for pushbutton and indicator IP 67 non-illuminative 12 x 12 mm illuminative 12 x 12 mm Lens IP 40 Additional Information * Material plastic * With white marking plate Product attribute Dimension Lens for pushbutton and indicator IP 40 non-illuminative illuminative 14 13.2 x 13.2 mm 13.2 x 13.2 mm black opaque 92-956.000 0.001 kg grey opaque 92-956.800 0.001 kg white opaque 92-956.900 0.001 kg red translucent 92-956.200 0.001 kg orange translucent 92-956.300 0.001 kg yellow translucent 92-956.400 0.001 kg green translucent 92-956.500 0.001 kg blue translucent 92-956.600 0.001 kg smoked transparent 92-958.100 0.001 kg red transparent 92-958.200 0.001 kg orange transparent 92-958.300 0.001 kg yellow transparent 92-958.400 0.001 kg green transparent 92-958.500 0.001 kg blue transparent 92-958.600 0.001 kg colourless transparent 92-958.700 0.001 kg Accessories 92 Bezel IP 40 Material Colour Part No. Weight black 92-912.0 0.001 kg white 92-912.9 0.001 kg Material Colour Part No. Weight Plastic black 51-948.0 0.003 kg Front bezel for pushbutton and indicator IP 40 Plastic Blind plug NJO NJO Mounting cut-outs Dimension Blind plug 18 x 18 mm 15 92 Accessories Rear side Illumination element PCB 4 The customer has to decide what series resistor shall be used to the LED .8 8 0. 16 5.7 * 1.6 Additional Information 8 0. 6.35 x 12.5 Terminal Part No. Component layout Dimensions Weight 92-800.042 1 0.001 kg IIlumination element PCB mounting PCB The component layouts you will find from page {$l=BR92_KAZE_Zeichnung} Switching element PCB illuminative Additional Information 4 9.3 1 2 4 12.5 1 3 10.16 3.6 12.5 5.7 The customer has to decide what series resistor shall be used to the LED 5.08 * O8 .8 16 Terminal Part No. Wiring diagram Contacts Component layout Dimensions Weight 2 1 0.001 kg Switching element PCB mounting illuminative 1 NO PCB 92-851.342 The component layouts you will find from page {$l=BR92_KAZE_Zeichnung} 16 Accessories 3 4 1 2 92 Wiring diagram 1 Spacer Additional Information * Adjustable for front plate thickness of 2/2.5/3/3.5/4 mm * When fitting, ensure that back of panel is free of grease and dirt Part No. Weight Spacer 92-965.0 0.003 kg PCB assembled Additional Information * For discrete switching applications including switching element and mounting flange, soldering terminal (assembled PCB incl. series resistor and LED on request) Part No. Weight PCB assembled 92-981.0 0.003 kg 17 92 Accessories Illumination Single-LED, T1 Bi-Pin Additional Information * The customer has to decide what series resistor shall be used to the LED * Luminosity and wave length scattering caused by LED manufacturing processes may cause slight variations in the illumination LED colour Forward voltage typ. Lumi. intensity Dom. wavelength Part No. Weight Single-LED Single-LED red 2.0 VDC @ 20 mA 160 mcd 625 nm 10-2601.3172S 0.001 kg Single-LED orange 2.0 VDC @ 20 mA 165 mcd 605 nm 10-2601.3173S 0.001 kg Single-LED yellow 2.9 VDC @ 20 mA 600 mcd 580 nm 10-2603.3174S 0.001 kg Single-LED green 3.2 VDC @ 20 mA 650 mcd 525 nm 10-2603.3175S 0.001 kg Single-LED blue 3.0 VDC @ 20 mA 250 mcd 467 nm 10-2603.3176S 0.001 kg Single-LED white 3.2 VDC @ 20 mA 500 mcd x=0.3/y=0.3 10-2603.3178S 0.001 kg 18 Accessories 92 Mounting Anti-twist ring Additional Information * For front panel thickness max. 2 mm Mounting cut-out Part No. Weight 51-910 0.001 kg Anti-twist ring O 16 mm Mounting flange 20 4 7.1 R2.2 21.55 0.1 4.9 Dimensions Part No. Weight Mounting flange 92-960.0 0.001 kg Lens remover Additional Information * For lens IP 40 only Part No. Weight Lens remover 18-910 0.002 kg 19 92 Accessories Mounting tool Additional Information * For tightening or loosening of the fixing nut Part No. Weight Mounting tool 01-907 0.020 kg Dismantling tool Additional Information * For actuator dismantling of switching element, illumination element and mounting flange Part No. Weight Dismantling tool 92-971.0 20 0.002 kg Drawings 92 Drawings Single-LED Single-LED Drilling plan (element side) Drilling plan (element side) A Fixing holes for mounting flange (92-960.0) B Holes for LED C Holes for centering pins A Fixing holes for mounting flange (92-960.0) B Holes for LED C Holes for contact pins Pad max. O 2.5 mm Through-connection recommended A 5.08 B 10.16 O1.0 B 15.24 C A A O2.0 C 6.35 10.16 15.24 B C C C C B 6.35 A 10.16 O 2.0 O 1.3 O 1.0 10.16 15.24 12.7 15.24 Bauteilelayout 1 Bauteilelayout 2 21 92 Technical data Pushbutton and Illuminated pushbutton Switching system Short-travel switching system with 2 independent contact points and tactile operation. Guarantees reliable switching even of very light loads. Fitted with 1 normally open contact. Material Lens Polycarbonate (PC) Front bezel Thermoplastic Elastomer (TPE) Frame Thermoplastic Polyester (PBT) Material of contact Gold (Au) Switching element Thermoplastic Polyester (PET, PBT) and Polyacetale (POM) Actuator housing Thermoplastic Polyester (PBT) Isolation resistance 109 between all terminals at 100 VDC, as per IEC 60512-2-3a Electrical life 500 000 operations at 42 VDC, 50 mA as per IEC 60512-5-9c. When attention is paid to the direction of current flow from terminal 3/4 to 1/2 the electrical life can be prolonged. Electrostatic discharge (ESD) 15 kV Switch rating Switching voltage min. 50 mV AC/DC max. 42 V AC/DC Switching current min. 10 A AC/DC max. 100 mA AC/DC Power rating max. 2 W Electric strength 500 VAC, 50 Hz, 1 min, as per IEC 60512-2-4a Environmental conditions Storage temperature -40 C ... +80 C Operating temperature -25 C ... +70 C Mechanical characteristics Tightening torque Fixing screw 40 Ncm recommended Fixing nut max. 50 Ncm Actuating force 2.7 N 1 N measured at the switching element 5 N measured at the lens Actuating travel Switching element 0.4 mm Rebound time 1 ms Front protection Switching element IP 40 (fluxproof to DIN 41640 Part 84) front IP 67 or IP 40 Shock resistance (semi-sinusoidal) max. 500 m/s, pulse width 11 ms, 3-axis, as per EN IEC 60068-2-27 Vibration resistance (sinusoidal) max. 100 m/s at 10 Hz ... 500 Hz, 10 cycles, 3-axis, as per EN IEC 60068-2-6 Approvals Resistance to heat of soldering 250 C, 3 s (PCB assembly) 320 C, 3 s (when using a soldering iron) Mechanical lifetime 1 Million operations as per IEC 60512-5-9a Electrical characteristics Contact resistance Starting value (initial) 100 m as per IEC 60512-2-2b EAO reserves the right to alter specifications without further notice. 22 Declaration of conformity CE Marking 92 General notes If desired, the actuators of the series 92 can be supplied ready marked. With your order please enclose a list of the desired markings or a drawing, showing the type or size of script or the symbols desired. 2. Hot stamping (Fig. 1) For larger series it is worth considering markings by means of hot stamping. We will pleased to advise you. For letters and figures, typefaces with 2.5 mm, 3 mm and 4 mm are available. 1. Laser engraving (Fig. 1) In addition to the most commonly used world languages, in DIN1451-3 close spacing, other typefaces are available as Scandinavian, Slavic, Greek, Russian and Polish. Red, blue and black lenses are filled with white colour. Other colour lenses are filled in black. Standard height of letters is 2 mm. If the height is not specified, we will supply 2 mm engraved letters. 3. Film inserts (Fig. 2) Instead of using engraving, the actuator can be fitted with transparent film inserts. However, for this purpose the use of transparent lens caps is recommended. If smoked lens caps are used the lettering does not become visible until the LED is alight. Max. size of film insert 11.4 x 11.4 mm for IP 40 10.4 x 10.4 mm for IP 67 Film thickness 0.2 mm. All dimensions in mm Height of letters h Number of lines Number of capital letters per line (target value) Number of small letters per line (target value) 3 2 5-6 6 4 2 4 4 5 1 3 3-4 6 1 2-3 3 8 1 2 2 Fig. 2 ABC abc h Fig. 1 23 92 Application guidelines Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e. g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime. Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch. Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e. g. 12 VDC) see Fig. 2. The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load. To get an efficient protection, the free-wheeling diode must be connected as close as possible to the inductive load! Counter EMF over load without free-wheeling diode Fig. 2 Switching with inductive load Fig. 1 Switch ON OFF 0 VDC + _ Free-wheeling diode Inductive load Several hundred to several thousend volts di __ e = L dt Note for soldering Process parameter for wave soldering Basic specification for wave soldering J-STD 75 W4C Maximum temperature on the component side of the pcb (Temperature must not exceed during the entire processing) 120 C Preheating phase (t1 ... t2) Ramp up 70 ... 120 sec typ. + 1C/sec Ramp up to maximum temperature (t2 ... t3) not defined Maximum temperature on the soldering side (Temp 3) Maximum time of soldering process (t3 ... t4) 250 C 3 sec Ramp down at 170 C: typ. -2 C/sec 24 Application guidelines 92 Temperature curve wave soldering Green curve: Red curve: Temperature on the component side of the pcb Temperature on the soldering side of the pcb Room temperature: Temp 1 Preheating: Temperature process = Temp 1 ... Temp 2 Process time = t1 ... t2 Ramp up to soldering temperature: Process time = Soldering phase: t2 ... t3 Temperature process = Temp 3 Process time = t3 ... t4 Iron soldering Basic specification for iron soldering IEC 60068-2-20 Maximum temperature at tip of iron: Maximum soldering time: 320 C 3 sec Cleaning/Lacquering The switching elements are not sealed. Cleaning up the PCB may damage the contacts in the switching elements. For this reason, the following points should be noted: - When soldering make sure that the flux does not pass on the upper side of the PCB. - When cleaning the PCB with detergents ensure that no dust or other debris may get inside of the switching elements. - Ensure that no lacquer penetrates into the interior of the switching element when lacquering the PCB. Storage of components To obtain the optimum solderability of the components, the following points should be noted during storage: - Do not store components in locations with high temperature or humidity. - Do not expose components to corrosive gases. - Avoid direct sunlight for a long period. 25 92 Application guidelines 60 max. Arrangement mounting flange 60 max. The arrangement of the mounting flanges and their number is determined by the size of the front panel or PCB. To ensure uniform, tactile switching, we recommend a layout of the flanges as per adjacent sketch. For large PCBs with several switching elements we recommend the following procedure: 1. Fit the actuator to the front panel. 2. Clip the mounting flange to the rear of the intended actuator. 3. Screw the PCB with the components soldered to it to the assembled mounting flange. This arrangement applies to PCBs 1.6 mm thick. Dismantling mounting flange Front plate PCB Spacer The tool Part No. 92-971.0 must be used for removing the mounting flange from the actuator. Before removing the flange, the PCB fixing screws must be loosened. If the number of actuators is insufficient, use the spacer Part. No. 92-965.0 which can be attached to the front panel. The spacer can be adjusted to the following front panel thicknesses: 1.5/2/2.2/3/3.5/4 mm and can be stuck to the back of the panel free of dirt and grease. 26 Spacer Index 92 Index from Part No. Part No. Page 01-907...................... 20 10-2601.3172S......... 18 10-2601.3173S......... 18 10-2603.3174S......... 18 10-2603.3175S......... 18 10-2603.3176S......... 18 10-2603.3178S......... 18 18-910...................... 19 51-910...................... 19 51-948.0................... 15 92-043.200................. 4 92-043.300................. 4 92-043.400................. 4 92-043.500................. 4 92-043.600................. 4 92-043.700................. 4 92-058.100................. 4 92-058.200................. 4 92-058.300................. 4 92-058.400................. 4 92-058.500................. 4 92-058.600................. 4 92-058.700................. 4 92-140.000................. 9 92-143.200................. 4 92-143.300................. 4 92-143.400................. 4 92-143.500................. 4 92-143.600................. 4 92-143.700................. 4 92-158.100................. 5 92-158.200................. 5 92-158.300................. 5 92-158.400................. 5 92-158.500................. 5 92-158.600................. 5 92-158.700................. 5 92-340.000............... 11 92-340.000............... 13 92-341.000................. 6 92-341.800................. 6 92-343.200................. 7 92-343.300................. 7 92-343.400................. 7 92-343.500................. 7 92-343.600................. 7 92-343.700................. 7 92-350.000............... 10 92-350.000............... 12 92-356.000................. 6 92-356.800................. 6 92-356.900................. 6 92-358.100................. 7 92-358.200................. 7 92-358.300................. 7 92-358.400................. 7 92-358.500................. 7 92-358.600................. 7 92-358.700................. 7 92-440.000............... 11 92-440.000............... 13 92-441.000................. 6 92-441.800................. 6 92-443.200................. 7 92-443.300................. 7 92-443.400................. 7 92-443.500................. 7 92-443.600................. 7 92-443.700................. 7 92-450.000............... 10 92-450.000............... 12 92-456.000................. 6 92-456.800................. 6 92-456.900................. 6 92-458.100................. 8 92-458.200................. 8 92-458.300................. 8 Part No. Page 92-458.400................. 8 92-458.500................. 8 92-458.600................. 8 92-458.700................. 8 92-800.042............... 16 92-851.342............... 16 92-912.0................... 15 92-912.9................... 15 92-941.000............... 14 92-941.200............... 14 92-941.300............... 14 92-941.400............... 14 92-941.500............... 14 92-941.600............... 14 92-941.700............... 14 92-941.800............... 14 92-956.000............... 14 92-956.200............... 14 92-956.300............... 14 92-956.400............... 14 92-956.500............... 14 92-956.600............... 14 92-956.800............... 14 92-956.900............... 14 92-958.100............... 14 92-958.200............... 14 92-958.300............... 14 92-958.400............... 14 92-958.500............... 14 92-958.600............... 14 92-958.700............... 14 92-960.0................... 19 92-965.0................... 17 92-971.0................... 20 92-981.0................... 17 27 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: EAO: 92-456.500 92-989.0 92-953.700 92-456.400 92-951.500 92-951.600 92-948.82 92-456.600 92-456.300 92343.900 92-951.900 92-951.300 92-356.300 92-456.200 92-453.200 92-951.200 92-951.400 92-941.900 92143.500