SNAP TEX Mounting/Wiring Tools and Spare Parts Features Description SNAP TEX mounting and wiring tools and spare parts are all part of the SNAP TEX family of wiring and mounting accessories. The parts in this data sheet are used for: * Securely mounting SNAP I/O racks, controllers, power supplies, and other devices on DIN rails * Wiring and commissioning SNAP I/O modules * Replacing lost or damaged parts * Adapting legacy parts to newer SNAP PAC parts SNAP TEX Family Part Numbers Part Description Rack Accessories SNAP-PSDIN DIN-rail adapter kit for most SNAP power supplies and controllers SNAP-PSUDIN DIN-rail adapter kit for large-footprint SNAP power supplies SNAP-ROKDIN DIN-rail adapter kit for SNAP-PAC-SRA or SNAP-RPSW SNAP-S2DIN DIN-rail adapter kit for SNAP-PAC-S2 SNAP-LCM4DIN DIN-rail adapter kit for SNAP-LCM4 SNAP-CDBBDIN DIN-rail adapter kit for classic digital brain boards (E1, B1, B5, B100) DIN-Rail Mounting Clips and Kits SNAP-TEX-DRC10 SNAP PAC rack DIN-rail adapter clip, 10-pack Opto 22 SNAP I/O mounting racks, controllers, power supplies, breakout boards, etc. can be panel mounted or DIN-rail mounted. For DIN-rail mounting, these clips and kits adapt the bottom of the hardware to attach securely to DIN rails. SNAP-TEX-RCKCAP SNAP PAC rack connector cap, pack of 16 SNAP-TEX-REC10N Narrow end cap for SNAP PAC racks DIN-rail assemblies, 10-pack SNAP-TEX-REC10W Wide end cap for SNAP PAC racks DIN-rail assemblies, 10-pack For cables and breakout boards in the SNAP TEX family, see form #1756, the SNAP TEX Cables and Breakout Boards Data Sheet. Choose the kit or clips you need based on the table on page 2. Operator Interface for SNAP HDD Modules The OptoTerminal-G20 makes it easier to commission and troubleshoot SNAP high-density digital (HDD) modules such as the SNAP-IAC-16 and the SNAP-ODC32-SRC. OPTOTERMINAL-G20 Operator interface for commissioning SNAP high-density digital modules SNAP-STRAPB Pack of 10 jumper straps for digital SNAP I/O modules SNAP-STRAP-OMR Jumper strap for SNAP-OMR6 modules SNAP-WIRESTRAPB Pack of 10 jumper connectors for digital SNAP I/O modules SNAP I/O module removal tool, 10-pack SNAP-FIELDCONB SNAP module field connector, 10-pack SNAP-RCK-B2M Adapter for using legacy SNAP brain on SNAP PAC or M-series racks SNAP-RCK-M2B Adapter for using SNAP PAC or SNAP M brains on SNAP B-series racks SNAP-MR10 Mechanical relay replacement for breakout boards, 10 A Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET SNAP-MODTOOL Form 1772-141031 The OptoTerminal-G20 displays the status of a highdensity digital module's points on a two-line LCD display and can also be used to turn output points on and off. See Opto 22 form 1547, the SNAP High-Density Digital Modules User's Guide, for more details. Other Tools and Parts SNAP TEX Mounting/Wiring Tools and Spare Parts Securely mount SNAP I/O racks, controllers, and power supplies to DIN rails Easily jumper 4-channel digital I/O modules Commission high-density digital modules Replace lost or damaged parts Use legacy and current brains and mounting racks together PAGE 1 SNAP TEX Mounting/Wiring Tools and Spare Parts DIN-Rail Clips and Kits For these SNAP products Clips needed Use this adapter clip Use this end cap Form 1772-141031 DATA SHEET SNAP TEX Mounting/Wiring Tools and Spare Parts Power Supplies PAGE 2 SNAP-PS5 SNAP-PS24 SNAP-PS5-24DC SNAP-PS5U SNAP-PS24U 1 kit SNAP-PSDIN N/A 1 kit SNAP-PSUDIN N/A 1 kit SNAP-PSDIN N/A 1 kit SNAP-S2DIN N/A Controllers SNAP-PAC-S1 SNAP-PAC-S1-W SNAP-PAC-S1-FM SNAP-PAC-S2 SNAP-PAC-S2-W Mounting Racks SNAP-PAC-RCK4 SNAP-PAC-RCK4-FM 2 clips SNAP-PAC-RCK8 SNAP-PAC-RCK8-FM SNAP-PAC-RCK12 SNAP-PAC-RCK12-FM 3 clips SNAP-PAC-RCK16 SNAP-PAC-RCK16-FM 4 clips SNAP-TEX-DRC10* (10 clips in package) SNAP-TEX-REC10W* (10 in package; use 2 per rack) SNAP-TEX-DRC10* (10 clips in package) SNAP-TEX-REC10W* (10 in package; use 2 per rack) SNAP-TEX-DRC10* (10 clips in package) SNAP-TEX-REC10N* (10 in package; use 2 per board) Breakout Boards SNAP-TEX-MR10-4 2 clips SNAP-TEX-MR10-16 SNAP-TEX-MR10-16C 3 clips SNAP-AIMA-HDB SNAP-AIMA-HDB-FM SNAP-AIV-HDB SNAP-AIV-HDB-FM SNAP-IDC-HDB SNAP-IDC-HDB-FM SNAP-TEX-32 SNAP-TEX-FB16-H SNAP-TEX-FB16-L 2 clips SNAP-SCM-BB4 3 clips SNAP-ODC-HDB SNAP-ODC-HDB-FM Other SNAP Devices SNAP-PAC-SRA SNAP-RPSW 1 kit SNAP-ROKDIN N/A * Requires the black plastic extrusion that comes with new racks and boards. Older racks and boards have a light-colored plastic extrusion. The black plastic extrusion is not sold separately. It is included with a new board or rack. SNAP-PSDIN SNAP-TEX-REC10W SNAP-TEX-DRC10 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Mounting/Wiring Tools and Spare Parts Racks: Installing SNAP Rack DIN-Rail Clips 1. 2. 3. 4. 5. 1. 2. 3. Remove the four screws that fasten the panel mounting base plate to the power supply. Remove the panel mounting base plate making sure to save the screws. Using the two flat-head screws included with the kit, assemble the SNAP-PSDIN-RAIL adapter as shown. 3 2 1 Power Supplies: Installing SNAP-PSDIN Adapters Rivet 4 5 4. 5. Attaching the Adapter Clip to a DIN Rail 1. 2. Hook the DIN-rail clip over the top of the DIN rail. Using a screwdriver, pry open the DIN-rail clip flange at the bottom of the clip. Push the clip towards the DIN rail. Snap the DIN-rail clip into place. 3. Using the four screws removed in step 1, fasten the DINrail adapter to the power supply. Mount the power supply on the DIN rail next to the rack or controller it will power. NOTE: The SNAP-PS524DC power supply is shown. Other power supplies have similar base plates. Extrusion assembly SNAP TEX Mounting/Wiring Tools and Spare Parts For racks with three or more clips only: Slide one DIN clip to the middle position and secure with the provided rivet. For racks with four clips, add another middle clip. Insert one edge of the circuit board into the extrusion. Push down hard on the other edge to snap the board into place. Attach one DIN clip to each end cap using the slots in the end caps as shown. Using the screws provided, secure an end cap and DIN clip assembly to each end of the extrusion. DIN rail Form 1772-141031 2 DATA SHEET 1 3 To remove: Use a screwdriver to pry open the DIN-rail clip flange. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PAGE 3 SNAP TEX Mounting/Wiring Tools and Spare Parts SNAP TEX Mounting/Wiring Tools and Spare Parts Installing the SNAP-ROKDIN Adapter Kit Both parts are Factory Mutual approved. This adapter kit is for the SNAP-PAC-SRA arbiter or the SNAPRPSW redundant power switch. The DIN-rail clip adds an additional 0.375 inches (0.95 cm) to the device's height. You need one adapter kit per device. 1. Turn the device over. Unscrew the four flat-head screws and remove the base plate. Save the screws. 2. Attach the new, plain base plate to the device using the saved screws. 3. Align the DIN-rail clip to the new base plate so that the spring will be at the bottom of the device when it is mounted on the DIN rail. Use the two round-head screws provided with the kit to attach the clip.. SNAP-STRAPB works with 8-position field connectors on many SNAP I/O modules. SNAP-STRAP-OMR works with 12-position gray field connectors on SNAP-OMR6 modules. 4. To mount, align the spring clip with the bottom edge of the DIN rail, push up to engage the spring, and slip the two top flanges over the top edge of the DIN rail. Wiring Accessories Form 1772-141031 DATA SHEET Jumper Straps for SNAP Digital I/O PAGE 4 SNAP I/O module jumper straps let you easily make jumper connections on a 4-channel digital SNAP I/O module. * The SNAP-STRAPB plugs into individual wire connections on an an 8-position pluggable field connector. * The SNAP-STRAP-OMR plugs into the 12-position field connectors on SNAP-OMR6 mechanical relay output modules to connect the third wire of each channel. * SNAP-STRAPs on multiple modules can be connected using the SNAP-WIRESTRAPB. Length of wire between connectors = 3.25" (8.26 cm) For other wiring options, see form #1756, the SNAP TEX Cables and Breakout Boards Data Sheet. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Mounting/Wiring Tools and Spare Parts Rack Adapters for Mixing Legacy and Current Brains and Racks Connector Caps While it's always best to use brains and racks designed to work together, sometimes mixing them is temporarily necessary. Two rack adapters are available: * SNAP-RCK-B2M allows a legacy SNAP brain such as a SNAP-B3000-ENET (blue connector) to be used on a SNAP PAC rack or a SNAP M-series rack (black connector). * SNAP-RCK-M2B allows a newer SNAP PAC brain or rackmounted controller, such as a SNAP-PAC-EB2 or a SNAPPAC-R1 (black connector), to be used on an older SNAP Bseries rack (blue connector). The SNAP-TEX-RCKCAP slips over an empty module connector on the rack to keep it dirt- and dust-free. The flexible black plastic cap is removable at any time. Pack of 16. Replacement Parts The SNAP-FIELDCONB replaces lost or damaged field connectors (pack of 10). The connector plugs into the top of a SNAP I/O module and is used for wiring field devices to the module. Used with most 1-, 2-, and 4-channel digital and analog modules, it accepts up to 14 AWG wire. Torque specifications for connector screws: 5.26 inch lbs (0.6 Newton m.) The SNAP-MR10 is a replacement mechanical relay (10 A) and clip for SNAP-TEX-MR10-16, SNAP-TEX-MR10-16C, and SNAP-TEX-MR10-4 breakout boards. Typical life expectancy (Electrical): 1 x 105. Please note that the adapter does not change the functionality or limitations of the older products. For example, when used with a newer brain or controller, a SNAP B-series rack is still limited to using digital modules only in its first eight slots. For additional information, see form #1688, SNAP PAC System Migration Technical Note and form #1693, Legacy and Current Product Compatibility Charts. SNAP I/O Module Removal Tool The SNAP-MODTOOL, included with each I/O mounting rack, is used to remove a SNAP I/O module from the rack. If you need extra tools, order this pack of 25. To remove a module: 1. If the modules are held in place with screws, remove them. 2. Holding the SNAP module tool (provided) as shown in the illustration below, insert it into the notch at the base of the module. 3. Squeeze the module tool against the module to open the release latch, and pull straight up on the module to remove it. SNAP TEX Mounting/Wiring Tools and Spare Parts Other Accessories Form 1772-141031 DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PAGE 5 More About Opto 22 Products Opto 22 develops and manufactures reliable, flexible, easy-to-use hardware and software products for industrial automation, energy management, remote monitoring, and data acquisition applications. groov groov puts your system on your mobile device. With zero programming, you can build mobile operator interfaces to monitor and control systems from Allen-Bradley, Siemens, Schneider Electric, Modicon, and many more. Web-based groov puts mobile-ready gadgets at your fingertips. Tag them from your existing tag database, and they automatically scale for use on any device with a modern web browser. See groov.com for more information and your free trial. SNAP PAC System Designed to simplify the typically complex process of selecting and applying an automation system, the SNAP PAC System consists of four integrated components: * SNAP PAC controllers * PAC ProjectTM Software Suite * SNAP PAC brains * SNAP I/OTM SNAP PAC Controllers Programmable automation controllers (PACs) are multifunctional, modular controllers based on open standards. Opto 22 has been manufacturing PACs for over two decades. The standalone SNAP PAC S-series, the rack-mounted SNAP PAC Rseries, and the software-based SoftPACTM all handle a wide range of digital, analog, and serial functions for data collection, remote monitoring, process control, and discrete and hybrid manufacturing. SNAP PACs are based on open Ethernet and Internet Protocol (IP) standards, so you can build or extend a system easily, without the expense and limitations of proprietary networks and protocols. Wired+WirelessTM models are also available. PAC Project Software Suite Opto 22's PAC Project Software Suite provides full-featured, costeffective control programming, HMI (human machine interface) development and runtime, OPC server, and database connectivity software for your SNAP PAC System. Control programming includes both easy-to-learn flowcharts and optional scripting. Commands are in plain English; variables and I/ O point names are fully descriptive. PAC Project Basic offers control and HMI tools and is free for download on our website, www.opto22.com. PAC Project Professional, available for separate purchase, adds one SoftPAC, OptoOPCServer, OptoDataLink, options for controller redundancy or segmented networking, and support for legacy Opto 22 serial misticTM I/O units. SNAP PAC Brains While SNAP PAC controllers provide central control and data distribution, SNAP PAC brains provide distributed intelligence for I/O processing and communications. Brains offer analog, digital, and serial functions, including thermocouple linearization; PID loop control; and optional high-speed digital counting (up to 20 kHz), quadrature counting, TPO, and pulse generation and measurement. SNAP I/O I/O provides the local connection to sensors and equipment. Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module, depending on the type of module and your needs. Analog, digital, and serial modules are all mixed on the same mounting rack and controlled by the same processor (SNAP PAC brain or rack-mounted controller). Quality Founded in 1974, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula, California. Because we test each product twice before it leaves our factory, rather than only testing a sample of each batch, we can guarantee most solid-state relays and optically isolated I/O modules for life. Free Product Support Opto 22's California-based Product Support Group offers free, comprehensive technical support for Opto 22 products. Our staff of support engineers represents decades of training and experience. Support is available in English and Spanish by phone or email, Monday-Friday, 7 a.m. to 5 p.m. PST. Additional support is always available on our website: how-to videos, OptoKnowledgeBase, self-training guide, troubleshooting and user's guides, and OptoForums. In addition, hands-on training is available for free at our Temecula, California headquarters, and you can register online. Purchasing Opto 22 Products Opto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-3216786 or 951-695-3000, or visit our website at www.opto22.com. www.opto22.com www.opto22.com * Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * Form 1335-131203 SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.