MICROWAVE CORPORATION HMC437MS8G v01.1002 SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7.0 GHz FREQ. DIVIDER & DETECTORS - SMT 10 Typical Applications Features Prescaler for DC to C Band PLL Applications: SSB Phase Noise: -153 dBc/Hz @100KHz * UNII, Pt. - Pt. & VSAT Radios Wide Bandwidth * 802.11a & HiperLAN WLAN Output Power: -1 dBm * Fiber Optic Single DC Supply: +5V @ 69 mA * Cellular / 3G Infrastructure MS8G SMT Package Functional Diagram General Description The HMC437MS8G is a low noise Divide-by-3 Static Divider utilizing InGaP GaAs HBT technology in a low cost 8 lead surface mount plastic package. This device operates from DC (with a square wave input) to 7.0 GHz input frequency from a single +5.0V DC supply. The low additive SSB phase noise of -153 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. Electrical Specifications, TA = +25 C, 50 Ohm System, Vcc= 5V Parameter Conditions Maximum Input Frequency Minimum Input Frequency Input Power Range SSB Phase Noise (100 kHz offset) Output Transition Time Typ. 7.0 7.5 GHz 0.1 GHz Sine Wave Input [1] Max. -12 -15 +12 dBm Fin= 6 to 7 GHz -10 -15 +10 dBm -4 -1 dBm Both RF Outputs Terminated -50 dBm Pin= 0 dBm, Fin= 6 GHz -153 dBc/Hz Pin= 0 dBm, Fout= 882 MHz 100 ps 69 mA Supply Current (Icc) 1. Divider will operate down to DC for square-wave input signal. 10 - 90 Units Fin= 1 to 6 GHz Output Power Reverse Leakage Min. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION HMC437MS8G v01.1002 SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7.0 GHz 20 15 15 10 10 5 Recommended Operating Window 0 -5 -10 -15 5 Min Pin +25 C Max Pin +25 C Min Pin +85 C Max Pin +85 C Min Pin -40 C Max Pin -40 C 0 -5 -10 -15 -20 -20 0 1 2 3 4 5 6 7 8 9 0 1 2 INPUT FREQUENCY (GHz) +25 C +85 C -40 C 2 1 SSB PHASE NOISE (dBc/Hz) OUTPUT POWER (dBm) 3 0 -1 -2 -3 -4 -5 -6 1 2 3 4 5 6 4 5 6 7 8 9 SSB Phase Noise Performance, Pin= 0 dBm, Fin= 6 GHz, T= 25 C 4 0 3 INPUT FREQUENCY (GHz) Output Power vs. Temperature 7 8 9 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 -170 2 10 10 3 INPUT FREQUENCY (GHz) 10 4 10 5 10 6 10 OFFSET FREQUENCY (Hz) Output Harmonic Content, Pin= 0 dBm, T= 25 C Reverse Leakage, Pin= 0 dBm, T= 25 C 0 0 Both Output Ports Terminated One Output Port Terminated -10 OUTPUT LEVEL (dBm) -10 OUTPUT LEVEL (dBm) 10 -20 -30 -40 Pfeedthru 2nd Harmonic 7 FREQ. DIVIDERS & DETECTORS - SMT 20 INPUT POWER (dBm) INPUT POWER (dBm) MMIC SUB-HARMONICALLY PUMPED MIXER - 25 GHz InputGaAs Sensitivity Window, T= 25 C Input Sensitivity Window17 vs. Temperature -20 -30 -40 -50 -60 -50 -70 0 1 2 3 4 5 6 INPUT FREQUENCY (GHz) 7 8 9 0 1 2 3 4 5 6 7 8 9 INPUT FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 10 - 91 MICROWAVE CORPORATION HMC437MS8G v01.1002 SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7.0 GHz 10 AMPLITUDE (mV) Output Voltage Waveform, Pin= 0 dBm, Fout= 882 MHz, T= 25 C Absolute Maximum Ratings 300 RF Input (Vcc= +5V) +13 dBm 200 Vcc +5.5V 100 Maximum Channel Temperature 135 C Continuous Pdiss (T=85 C) (derate 9.85mW/C above 92 C) 424mW Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C 0 -100 -200 FREQ. DIVIDER & DETECTORS - SMT -300 DC blocking capacitors are required at RF input and RF output ports. Choose value for lowest frequency of operation. -400 -500 22.5 23 23.5 24 24.5 25 25.5 Typical Supply Current vs. Vcc TIME (ns) Vcc (V) Icc (mA) 4.75 64 5.0 69 5.25 75 Note: Divider will operate over full voltage range shown above Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 10 - 92 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION HMC437MS8G v01.1002 SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7.0 GHz Pin Description Pin Number Function Description 1 Vcc Supply voltage 5V 0.25V. 2 IN RF input must be DC blocked. 3 IN RF input 180 out of phase with pin 2 for differential operation. AC ground for single ended operation. 4, 5 GND All ground leads and ground paddle must be soldered to PCB RF/DC ground. 6 OUT Divided output 180 out of phase with pin 7. 7 OUT Divided Output. 8 N/C No Connection Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com FREQ. DIVIDERS & DETECTORS - SMT 10 10 - 93 MICROWAVE CORPORATION v01.1002 HMC437MS8G SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7.0 GHz Evaluation PCB FREQ. DIVIDER & DETECTORS - SMT 10 List of Materials Item Description J1 - J3 PC Mount SMA RF Connector J4, J5 DC Pin C1 - C4 100 pF Capacitor, 0402 Pkg. C5 10,000 pF Capacitor, 0603 Pkg. C6 4.7 F Tantalum Capacitor U1 HMC437MS8G Divide-by-3 PCB* 105697 Eval Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2 and J3 provide differential output signals. * Circuit Board Material: Rogers 4350 10 - 94 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.1002 HMC437MS8G SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7.0 GHz Application Circuit FREQ. DIVIDERS & DETECTORS - SMT 10 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 10 - 95