CWR06
www.vishay.com Vishay Sprague
Revision: 08-Jun-11 1Document Number: 40009
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Solid Tantalum Surface Mount Capacitors TANTAMOUNT®
Conformal Coated, Military MIL-PRF-55365/4 Qualified
FEATURES
• Weibull failure rates B, C, D, T
Exponential failure rates M, P, R, S
• Tape and reel available per EIA 481
• Termination finishes available; gold plate,
solder plated and hot solder dipped
• Mounting: Surface mount
• Compliant to RoHS Directive 2002/95/EC
Note
*Pb containing terminations are not RoHS compliant, exemptions
may apply
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.10 μF to 100 μF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
Voltage Rating: 4 VDC to 50 VDC
Notes
(1) Contact marketing for availability of Weibull D failure rate for 50 V ratings
(2) T level capacitors are recommended for “space applications”
Note
• When solder coated terminations are required, add 0.015" [0.38 mm] to termination dimension tolerances
ORDERING INFORMATION
CWR06 D B 155 K B A /TR
TYPE VOLTAGE TERMINATION
FINISH
CAPACITANCE CAPACITANCE
TOLERANCE
FAILURE RATE
%/1000 h
SURGE CURRENT
(OPTIONAL)
PACKAGING
C = 4 V
D = 6 V
F = 10 V
H = 15 V
J = 20 V
K = 25 V
M = 35 V
N = 50 V
B = Gold
C = Hot solder
dipped
H = Solder
plate
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros to
follow.
J = ± 5 %
K = ± 10 %
M = ± 20 %
M = 1.0
P = 0.1
R = 0.01
S = 0.001
B = 0.1
C = 0.01
D = 0.001
(1)
T = 0.01
(2)
A = 10 cycles at + 25 °C
B = 10 cycles at - 55 °C
and + 85 °C
C = 10 cycles at - 55 °C
and + 85 °C
(before Weibull grading)
Blank = Bulk,
plastic tray
/FA = Waffle
pack
/PR =
100 pcs reel
/HR = Half reel
/TR = Full reel
DIMENSIONS in inches [millimeters]
CASE CODE L W H P T1T2 (MAX.)
A 0.100 ± 0.015
[2.54 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
B 0.150 ± 0.015
[3.81 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
C 0.200 ± 0.015
[5.08 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
D 0.150 ± 0.015
[3.81 ± 0.38]
0.100 ± 0.015
[2.54 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
E 0.200 ± 0.015
[5.08 ± 0.38]
0.100 ± 0.015
[2.54 ± 0.38]
0.050 ± 0.015
[1.27 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
F 0.220 ± 0.015
[5.59 ± 0.38]
0.135 ± 0.015
[3.43 ± 0.38]
0.070 ± 0.015
[1.78 ± 0.38]
0.030 ± 0.005
[0.76 ± 0.13]
0.005
[0.13]
0.015
[0.38]
G 0.265 ± 0.015
[6.73 ± 0.38]
0.110 ± 0.015
[2.79 ± 0.38]
0.110 ± 0.015
[2.79 ± 0.38]
0.050 ± 0.005
[1.27 ± 0.13]
0.005
[0.13]
0.015
[0.38]
H 0.285 ± 0.015
[7.24 ± 0.38]
0.150 ± 0.015
[3.81 ± 0.38]
0.110 ± 0.015
[2.79 ± 0.38]
0.050 ± 0.005
[1.27 ± 0.13]
0.005
[0.13]
0.015
[0.38]
W
LP
H
P
Weld and
dimple
projection
identies
anode (+)
terminal
-+
T1 -
T2 Max.
CWR06
www.vishay.com Vishay Sprague
Revision: 08-Jun-11 2Document Number: 40009
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CASE CODES
μF 4 V 6 V 10 V 15 V 20 V 25 V 35 V 50 V
0.10 A
0.15 A
0.22 AB
0.33 AB
0.47 ABC
0.68 A B B C D
1.0 A B C D E
1.5 A B C D E F
2.2 A B C D E F
3.3 B C D E F G
4.7 B C D E F G H
6.8 C D E F G H
10 D E F G
15 E F G H
22 F G H
33 F G H
47 G H
68 G H
100 H
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DCL (μA) AT MAX. DF (%) AT MAX. ESR
AT + 25 °C
100 kHz
()
+ 25 °C + 85 °C + 125 °C + 25 °C + 85 °C
+ 125 °C - 55 °C
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C
2.2 A CWR06C(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0
4.7 B CWR06C(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0
6.8 C CWR06C(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5
10 D CWR06C(1)106(2)(3)(4)(5) 1.0 10 12 8 8 10 4.0
15 E CWR06C(1)156(2)(3)(4)(5) 1.0 10 12 8 10 12 3.5
33 F CWR06C(1)336(2)(3)(4)(5) 2.0 20 24 8 10 12 2.2
68 G CWR06C(1)686(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1
100 H CWR06C(1)107(2)(3)(4)(5) 4.0 40 48 10 12 12 0.9
6 VDC AT + 85 °C; 4 VDC AT + 125 °C
1.5 A CWR06D(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0
3.3 B CWR06D(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0
4.7 C CWR06D(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5
6.8 D CWR06D(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5
10 E CWR06D(1)106(2)(3)(4)(5) 1.0 10 12 8 10 12 3.5
22 F CWR06D(1)226(2)(3)(4)(5) 2.0 20 24 8 10 12 2.2
47 G CWR06D(1)476(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1
68 H CWR06D(1)686(2)(3)(4)(5) 4.0 40 48 10 12 12 0.9
Notes
(1) Termination finish: B, C, H
(2) Capacitance tolerance: J, K, M
(3) Failure rate: B, C, D, M, P, R, S, T
(4) Surge current (optional): A, B, C
(5) Packaging: Blank, /FA, /HR, /PR, /TR
* 5 % tolerance is not available for the 0.33 μF/50 V design
CWR06
www.vishay.com Vishay Sprague
Revision: 08-Jun-11 3Document Number: 40009
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
1.0 A CWR06F(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0
2.2 B CWR06F(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0
3.3 C CWR06F(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5
4.7 D CWR06F(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5
6.8 E CWR06F(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 3.5
15 F CWR06F(1)156(2)(3)(4)(5) 2.0 20 24 8 8 10 2.5
33 G CWR06F(1)336(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1
47 H CWR06F(1)476(2)(3)(4)(5) 5.0 50 60 10 12 12 0.9
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
0.68 A CWR06H(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0
1.5 B CWR06H(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0
2.2 C CWR06H(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5
3.3 D CWR06H(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 5.0
4.7 E CWR06H(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0
10 F CWR06H(1)106(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5
22 G CWR06H(1)226(2)(3)(4)(5) 4.0 40 48 6 8 8 1.1
33 H CWR06H(1)336(2)(3)(4)(5) 5.0 50 60 8 8 10 0.9
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
0.47 A CWR06J(1)474(2)(3)(4)(5) 1.0 10 12 8 8 10 16.0
0.68 B CWR06J(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 14.0
1.0 B CWR06J(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0
1.5 C CWR06J(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 6.0
2.2 D CWR06J(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 5.0
3.3 E CWR06J(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0
6.8 F CWR06J(1)685(2)(3)(4)(5) 2.0 20 24 6 8 8 2.4
15 G CWR06J(1)156(2)(3)(4)(5) 3.0 30 36 6 8 8 1.1
22 H CWR06J(1)226(2)(3)(4)(5) 4.0 40 48 6 8 8 0.9
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
0.33 A CWR06K(1)334(2)(3)(4)(5) 1.0 10 12 6 8 8 15.0
0.68 B CWR06K(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 10.0
1.0 C CWR06K(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5
1.5 D CWR06K(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5
2.2 E CWR06K(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 3.5
4.7 F CWR06K(1)475(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5
6.8 G CWR06K(1)685(2)(3)(4)(5) 2.0 20 24 6 8 8 1.2
10 G CWR06K(1)106(2)(3)(4)(5) 3.0 30 36 6 8 8 1.4
15 H CWR06K(1)156(2)(3)(4)(5) 4.0 40 48 6 8 8 1.0
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DCL (μA) AT MAX. DF (%) AT MAX. ESR
AT + 25 °C
100 kHz
()
+ 25 °C + 85 °C + 125 °C + 25 °C + 85 °C
+ 125 °C - 55 °C
Notes
(1) Termination finish: B, C, H
(2) Capacitance tolerance: J, K, M
(3) Failure rate: B, C, D, M, P, R, S, T
(4) Surge current (optional): A, B, C
(5) Packaging: Blank, /FA, /HR, /PR, /TR
* 5 % tolerance is not available for the 0.33 μF/50 V design
CWR06
www.vishay.com Vishay Sprague
Revision: 08-Jun-11 4Document Number: 40009
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
0.22 A CWR06M(1)224(2)(3)(4)(5) 1.0 10 12 6 8 8 24.0
0.47 B CWR06M(1)474(2)(3)(4)(5) 1.0 10 12 6 8 8 17.0
0.68 C CWR06M(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 10.0
1.0 D CWR06M(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5
1.5 E CWR06M(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5
3.3 F CWR06M(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 2.5
4.7 G CWR06M(1)475(2)(3)(4)(5) 2.0 20 24 6 8 8 1.5
6.8 H CWR06M(1)685(2)(3)(4)(5) 3.0 30 36 6 8 8 1.3
50 VDC AT + 85 °C; 33 VDC AT + 125 °C
0.10 A CWR06N(1)104(2)(3)(4)(5) 1.0 10 12 6 8 8 75.0
0.15 A CWR06N(1)154(2)(3)(4)(5) 1.0 10 12 6 8 8 25.0
0.22 B CWR06N(1)224(2)(3)(4)(5) 1.0 10 12 6 8 8 17.0
0.33 * B CWR06N(1)334(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0
0.47 C CWR06N(1)474(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0
0.68 D CWR06N(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 7.0
1.0 E CWR06N(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.0
1.5 F CWR06N(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0
2.2 F CWR06N(1)225(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5
3.3 G CWR06N(1)335(2)(3)(4)(5) 2.0 20 24 6 8 8 2.0
4.7 H CWR06N(1)475(2)(3)(4)(5) 3.0 30 36 6 8 8 1.5
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE PART NUMBER
MAX. DCL (μA) AT MAX. DF (%) AT MAX. ESR
AT + 25 °C
100 kHz
()
+ 25 °C + 85 °C + 125 °C + 25 °C + 85 °C
+ 125 °C - 55 °C
Notes
(1) Termination finish: B, C, H
(2) Capacitance tolerance: J, K, M
(3) Failure rate: B, C, D, M, P, R, S, T
(4) Surge current (optional): A, B, C
(5) Packaging: Blank, /FA, /HR, /PR, /TR
* 5 % tolerance is not available for the 0.33 μF/50 V design
CWR06
www.vishay.com Vishay Sprague
Revision: 08-Jun-11 5Document Number: 40009
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) A0, B0, K0, are determined by the maximum dimensions to the ends of the terminals extending from the component body and/or the body
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent
rotation of the component within the cavity of not more than 20°.
(2) Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide
“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum.
(3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed
cavities or to the edge of the cavity whichever is less.
(4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier
tape between the embossed cavity or to the edge of the cavity whichever is less.
(5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossement. Dimensions of
embossement location shall be applied independent of each other.
(6) B1 dimension is a reference dimension tape feeder clearance only.
TAPE AND REEL PACKAGING in inches [millimeters]
Note
• Metric dimensions will govern. Dimensions in inches are rounded and for reference only.
Tape and reel specifications: All case sizes are
available on plastic embossed tape per EIA-481.
Standard reel diameter is 7" (178 mm).
CARRIER TAPE DIMENSIONS in inches [millimeters]
CASE CODE TAPE SIZE B1 (max.) D1 (min.) F P1T2 (max.) W
A 8 mm 0.179 [4.55] 0.039
[1.0]
0.138 ± 0.002
[3.5 ± 0.05]
0.157 ± 0.004
[4.0 ± 0.1]
0.098
[2.5]
0.315 + 0.004
[8.0 ± 0.10]
B, C, D, E 12 mm 0.323 [8.2] 0.059
[1.5]
0.217 ± 0.002
[5.5 ± 0.05]
0.157 ± 0.004
[4.0 ± 0.1]
0.256
[6.5]
0.472 ± 0.012
[12.0 ± 0.30]
F12 mm
double pitch 0.323 [8.2] 0.059
[1.5]
0.217 ± 0.002
[5.5 ± 0.05]
0.315 ± 0.004
[8.0 ± 0.10]
0.256
[6.5]
0.472 ± 0.012
[12.0 ± 0.30]
G, H 16 mm 0.476 [12.1] 0.059
[1.5]
0.295 ± 0.004
[7.5 ± 0.1]
0.315 ± 0.004
[8.0 ± 0.10]
0.315
[8.0]
0.642 max.
[16.3] max.
0.004 [0.10]
max.
K0
T2
max.
B1 max. (6)
0.024
[0.600]
max.
10 pitches cumulative
tolerance on tape
± 0.008 [0.200]
Embossment
0.069 ± 0.004
[1.75 ± 0.10]
D min. for components
0.079 x 0.047 [2.0 x 1.2] and larger (5)
.
1
Maximum
USER DIRECTION
OF FEED
Center lines
of cavity
A0
P1
FW
0.030 [0.75]
min. (3)
0.030 [0.75]
min. (4)
0.079 ± 0.002
[2.0 ± 0.05]
0.157 ± 0.004
[4.0 ± 0.10]
0.059 + 0.004 - 0.0
[1.5 + 0.10 - 0.0]
B0
Maximum
component
rotation
(Side or front sectional view)
20°
For tape feeder
reference only
including draft.
Concentric around B0
Deformation
between
embossments
Top
cover
tape
Top
cover
tape
cavity size (1)
DIRECTION OF FEED
Cathode (-)
Anode (+)
Bending radius (2)
R minimum:
8 mm = 0.984" (25 mm)
12 mm and 16 mm = 1.181" (30 mm)
R
min.
20° Maximum
component rotation
Typical
component
cavity
center line
Typical
component
center line
A0
B0
(Top view)
0.9843 [250.0]
Tape
3.937 [100.0]
0.039 [1.0]
max.
0.039 [1.0]
max.
Camber
Allowable camber to be 0.039/3.937 [1/100]
(Top view)
Non-cumulative over 9.843 [250.0]
CWR06
www.vishay.com Vishay Sprague
Revision: 08-Jun-11 6Document Number: 40009
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Bulk capacitors are shipped in plastic trays
(2) T level capacitors are only shipped in tape and reel/or waffle packaging. Contact factory for waffle pack quantities
STANDARD PACKAGING QUANTITY
CASE CODE
QUANTITY (PCS/REEL) BULK, PLASTIC
TRAY QUANTITY
(PCS)
7", FULL REEL
(/TR)
7", HALF REEL
(/HR)
7", PARTIAL REEL
(/PR)
A, B, C, D, E 2500 1250 100 75
F 1000 500 100 75
G 600 300 100 60
H 600 300 100 50
PAD DIMENSIONS in inches [millimeters]
CASE CODE WIDTH (A) PAD METALLIZATION (B) SEPARATION (C)
A 0.065 [1.6] 0.050 [1.3] 0.040 [1.0]
B 0.065 [1.6] 0.070 [1.8] 0.055 [1.4]
C 0.065 [1.6] 0.070 [1.8] 0.120 [3.0]
D 0.115 [2.9] 0.070 [1.8] 0.070 [1.8]
E 0.115 [2.9] 0.070 [1.8] 0.120 [3.0]
F 0.150 [3.8] 0.070 [1.8] 0.140 [3.6]
G 0.125 [3.2] 0.070 [1.8] 0.170 [4.3]
H 0.165 [4.2] 0.090 [2.3] 0.170 [4.3]
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
A0.060
B, C 0.075
D, E 0.085
F0.110
G0.120
H0.150
A
C
B
B
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
