To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. "Standard": 8. 9. 10. 11. 12. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC29L00 Series THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR DESCRIPTION PC29L00 Series are low dropout regulators which have 100 mA capable for the output current. The variation of output voltage is 3 V, 3.3 V, 4 V and 5 V. FEATURES CONNECTION DIAGRAM * Low dropout voltage. VDIF 0.3 V (TOP VIEW) * Built-in overcurrent protection circuit. PC29L00J Series * Built-in thermal shut-down circuit. 1 ORDERING INFORMATION Output Voltage 3V 3.3 V 4V 5V Type Number 3 Package PC29L03J TO-92 PC29L03T SOT-89 PC29L33J TO-92 PC29L33T SOT-89 PC29L04J TO-92 PC29L04T SOT-89 PC29L05J TO-92 PC29L05T SOT-89 OUTPUT GND INPUT PC29L00T Series GND 1 OUTPUT Document No. G10354EJ2V0DS00 (2nd edition) Date Published December 1995 P Printed in Japan 2 2 GND 3 INPUT (c) 1995 PC29L00 Series BLOCK DIAGRAM INPUT Reference voltage Error amplifier Drive circuit OUTPUT Thermal shut down Start-up circuit Over-current protection GND 2 PC29L00 Series ABSOLUTE MAXIMUM RATINGS (TA = 25 C, Unless otherwise specified.) PARAMETER SYMBOL Input Voltage VIN Internal Power Dissipation PT RATING UNIT 16 J 700 Note 1 T 400 Note 1 V mW 2000 Note 1, 2 Operating Ambient Temperature Range TA -30 to +85 C Operating Junction Temperature Range TJ -30 to +150 C Storage Temperature Range Tstg -55 to +150 C Thermal Resistance (Junction to Case) Rth(J - C) Thermal Resistance (Junction to Ambient) Rth(J - A) J - T 30 J 180 T 315 C/W C/W 62.5 Note 2 Notes 1. TA 25 C 2. With the 16 cm2 x 0.7 mm ceramic substrate TYPICAL CONNECTION D1 PC29L00 INPUT OUTPUT + CIN CIN COUT D2 : 0.1 to 0.47 F. COUT : More than 10 F. D1 : Need for VO > VIN. D2 : Need for VO < GND. RECOMMENDED OPERATING CONDITIONS PARAMETER Input Voltage SYMBOL VIN TYPE NUMBER MIN. TYP. MAX. UNIT V PC29L03 3.5 9 PC29L33 3.8 9 PC29L04 4.5 12 PC29L05 5.5 12 Output Current IO All 0 40 mA Operating Ambient Temperature Range TA All -30 +85 C Operating Junction Temperature Range TJ All -30 +125 C 3 PC29L00 Series ELECTRICAL CHARACTERISTICS PC29L03 (VIN = 4 V, IO = 40 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage Line Regulation Load Regulation Quiescent Current TEST CONDITIONS VO REGIN REGL IBIAS MIN. TYP. MAX. 2.88 3.0 3.12 3.5 V VIN 9 V, 1 mA IO 40 mA, 0 C TJ 125 C 2.85 3.15 4.5 V VIN 5.5 V, 1 mA IO 100 mA, 0 C TJ 125 C 2.85 3.15 UNIT V 3.5 V VIN 12 V 4 50 3.5 V VIN 9 V 2 20 1 mA IO 100 mA 37 50 1 mA IO 40 mA 15 20 IO = 0 1.5 2.0 mA IO = 100 mA 10 20 mA 6 20 mA 1.0 mA mV mV Start-up Current IBIAS(S) IO = 0 mA, before VO regulation Quiescent Current Change IBIAS 4 V VIN 12 V, 0 C TJ 125 C Output Noise Voltage Vn 10 Hz f 100 kHz Ripple Rejection R*R f = 120 Hz, 4 V VIN 9 V Dropout Voltage VDIF IO = 40 mA, 0 C TJ 125 C 0.15 Peak Output Current IOpeak VIN = 5 V 190 mA Short Circuit Current IOshort VIN = 12 V 100 mA Temperature Coefficient of VO/T IO = 5 mA, 0 C TJ 125 C -0.5 mV/C Output Voltage 4 SYMBOL 48 25 Vrms 66 dB 0.3 V PC29L00 Series ELECTRICAL CHARACTERISTICS PC29L33 (VIN = 5 V, IO = 40 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage Line Regulation Load Regulation Quiescent Current SYMBOL TEST CONDITIONS VO REGIN REGL IBIAS MIN. TYP. MAX. 3.17 3.3 3.43 3.8 V VIN 10 V, 1 mA IO 40 mA, 0 C TJ 125 C 3.14 3.46 4.5 V VIN 5.5 V, 1 mA IO 100 mA, 0 C TJ 125 C 3.14 3.46 UNIT V 3.8 V VIN 12 V 4 50 3.8 V VIN 9 V 2 20 1 mA IO 100 mA 37 50 1 mA IO 40 mA 16 20 IO = 0 1.5 2.0 mA IO = 100 mA 10 20 mA 19 30 mA 1.0 mA mV mV Start-up Current IBIAS(S) IO = 0 mA, before VO regulation Quiescent Current Change IBIAS 4.3 V VIN 12 V, 0 C TJ 125 C Output Noise Voltage Vn 10 Hz f 100 kHz Ripple Rejection R*R f = 120 Hz, 4.3 V VIN 9 V Dropout Voltage VDIF IO = 40 mA, 0 C TJ 125 C 0.15 Peak Output Current IOpeak VIN = 5 V 190 mA Short Circuit Current IOshort VIN = 12 V 100 mA Temperature Coefficient of VO/T IO = 5 mA, 0 C TJ 125 C -0.6 mV/C 48 28 Vrms 65 dB 0.3 V Output Voltage 5 PC29L00 Series ELECTRICAL CHARACTERISTICS PC29L04 (VIN = 6 V, IO = 40 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage TEST CONDITIONS VO MIN. TYP. MAX. 3.84 4.0 4.16 4.5 V VIN 12 V, 1 mA IO 40 mA, 0 C TJ 125 C 3.80 4.20 VIN = 6 V, 1 mA IO 100 mA, 0 C TJ 125 C 3.80 4.20 UNIT V Line Regulation REGIN 4.5 V VIN 12 V 4 30 mV Load Regulation REGL 1 mA IO 100 mA 33 60 mV 1 mA IO 40 mA 14 30 IO = 0 1.6 2.0 mA IO = 100 mA 10 20 mA 20 50 mA 1.0 mA Quiescent Current 6 SYMBOL IBIAS Start-up Current IBIAS(S) IO = 0 mA, before VO regulation Quiescent Current Change IBIAS 4.5 V VIN 12 V, 0 C TJ 125 C Output Noise Voltage Vn 10 Hz f 100 kHz Ripple Rejection R*R f = 120 Hz, 5 V VIN 10 V Dropout Voltage VDIF IO = 40 mA, 0 C TJ 125 C 0.15 Peak Output Current IOpeak VIN = 6 V 220 mA Short Circuit Current IOshort VIN = 12 V 100 mA Temperature Coefficient of Output Voltage VO/T IO = 5 mA, 0 C TJ 125 C 0.2 mV/C 47 35 Vrms 65 dB 0.3 V PC29L00 Series ELECTRICAL CHARACTERISTICS PC29L05 (VIN = 6 V, IO = 40 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL TEST CONDITIONS VO MIN. TYP. MAX. 4.8 5.0 5.2 5.5 V VIN 12 V, 1 mA IO 40 mA, 0 C TJ 125 C 4.75 5.25 VIN = 6 V, 1 mA IO 100 mA, 0 C TJ 125 C 4.75 5.25 UNIT V Line Regulation REGIN 5.5 V VIN 12 V 4 30 mV Load Regulation REGL 1 mA IO 100 mA 35 80 mV 1 mA IO 40 mA 15 30 IO = 0 1.6 2.0 mA IO = 100 mA 10 20 mA 50 90 mA 1.0 mA Quiescent Current IBIAS Start-up Current IBIAS(S) IO = 0 mA, before VO regulation Quiescent Current Change IBIAS 6 V VIN 12 V, 0 C TJ 125 C Output Noise Voltage Vn 10 Hz f 100 kHz Ripple Rejection R*R f = 120 Hz, 6 V VIN 11 V Dropout Voltage VDIF IO = 40 mA, 0 C TJ 125 C 0.15 Peak Output Current IOpeak VIN = 7 V 210 mA Short Circuit Current IOshort VIN = 12 V 100 mA Temperature Coefficient of Output Voltage VO/T IO = 5 mA, 0 C TJ 125 C 0.2 mV/C 46 40 Vrms 62 dB 0.3 V 7 PC29L00 Series TYPICAL CHARACTERISTICS VO - VIN ( PC29L03) Pd - TA 5 PC29L00T 62.5 C/W (With the 16 cm2 x 0.7 mm ceramic substrate) 1500 TA = 25 C VO - Output Voltage - V Pd - Power Dissipation - mW 2000 1000 700 500 400 85 C PC29L00J 180 C/W PC29L00T 4 IO = 0 mA 40 mA 3 100 mA 2 1 315 C/W 0 0 50 100 0 150 4 6 8 10 IBIAS (IBIAS(S)) - VIN ( PC29L05) 16 60 TJ = 25 C 50 40 30 IO = 100 mA IO = 40 mA IO = 0 20 10 0 2 4 6 40 30 20 IO = 100 mA 10 0 10 8 TJ = 25 C 50 IO = 40 mA IO = 0 0 2 4 6 10 VDIF - IO 0.5 0.5 IO = 40 mA 0.3 PC29L03 0.2 0.1 PC29L05 0 50 TJ = 25 C VDIF - Dropout Voltage - V 0.4 0 -20 8 VIN - Input Voltage - V VDIF - TJ VDIF - Dropout Voltage - V 14 IBIAS (IBIAS(S)) - VIN ( PC29L03) VIN - Input Voltage - V 100 TJ - Junction Temperature - C 8 12 VIN - Input Voltage - V IBIAS - Quiescent Current - mA IBIAS - Quiescent Current - mA 2 TA - Ambient Temperature - C 60 0 0 150 0.4 0.3 0.2 0.1 0 0 20 40 60 80 IO - Output Current - mA 100 PC29L00 Series TYPICAL CHARACTERISTICS VO - TJ ( PC29L03) R*R - Ripple Rejection - dB 100 TJ = 25 C VIN = 5 V IO = 40 mA 80 PC29L03 60 PC29L05 40 20 0 10 100 1k 10 k VO - Output Voltage Deviation - mV R*R - f 100 k 50 VIN = 4 V IO = 5 mA 0 -50 -100 0 150 VO - TJ ( PC29L04) 50 VO - Output Voltage Deviation - mV VO - Output Voltage Deviation - mV VO - TJ ( PC29L33) VIN = 5 V IO = 5 mA 0 -50 -100 50 100 TJ - Junction Temperature - C f - Frequency - Hz 0 50 100 150 TJ - Junction Temperature - C 50 0 -50 VIN = 6 V IO = 5 mA -100 0 50 100 150 TJ - Junction Temperature - C VO - Output Voltage Deviation - mV VO - TJ ( PC29L05) 50 0 -50 VIN = 6 V IO = 5 mA -100 0 50 100 150 TJ - Junction Temperature - C 9 PC29L00 Series PACKAGE DIMENSIONS (Unit: mm) PC29L00J Series 3PIN PLASTIC SIP (TO-92) 10 PC29L00 Series PC29L00T Series SOT-89 0.42 0.06 0.47 1.5 0.06 3.0 4.00.25 1.50.1 2.50.1 0.8 MIN. 4.50.1 1.60.2 0.420.06 0.41+0.03 -0.05 11 PC29L00 Series RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales offices in case other soldering process is used, or in case soldering is done under different conditions. TYPES OF THROUGH HOLE MOUNT DEVICE PC29L00J Series Soldering Process Wave soldering Soldering Conditions Symbol Solder temperature: 260 C or below. Flow Time: 10 seconds or below. TYPES OF SURFACE MOUNT DEVICE For more details, refer to our document "Semiconductor Device Mounting Manual" (IEI-1207). PC29L00T Series Soldering Process Soldering Conditions Symbol Infrared ray reflow Peak package's temperature: 235 C or below. Reflow time: 30 seconds or below (210 C or higher). Number of flow process: 2. Exposure limit Note: None. IR35-00-2 Vapor phase soldering Peak package's temperature: 215 C or below. Reflow time: 40 seconds or below (200 C or higher). Number of flow process: 2. Exposure limit Note: None. VP15-00-2 Wave soldering Solder temperature: 260 C or below. Flow time: 10 seconds or below. Number of flow process: 1. Exposure limit Note: None. WS60-00-1 Note Exposure limit before soldering after dry-pack package is opened. Remark Storage conditions: 25 C and relative humidity at 65 % or less. Caution Do not apply more than a single process at once, except for "Partial heating method". REFERENCE Document Name Document No. NEC semiconductor device reliability/quality control system. IEI-1212 Quality grade on NEC semiconductor devices. IEI-1209 Semiconductor device mounting technology manual. IEI-1207 Semiconductor device package manual. IEI-1213 Guide to quality assurance for semiconductor devices. MEI-1202 Semiconductor selection guide. MF-1134 12 PC29L00 Series [MEMO] 13 PC29L00 Series No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94.11