Model DV-05 DIN Rail Mount In-Line Amplifier DESCRIPTION These in-line amplifiers feature DIN-rail mount enclosures with front accessible electrical connections and adjustments. Amplifiers are available for strain-gage transducers. FEATURES * DIN rail mount * Unamplified transducer input * Bridge-based transducer input * 0 to 5 V three-wire output with 11 Vdc to 28 Vdc power * 3 Vdc or 5 Vdc excitation * RFI, ESD protected * CE approved Model DV-05 DIN PERFORMANCE SPECIFICATIONS Characteristic Measure Number of channels 1 Case material Plastic Mounting 35 mm DIN Certification CE approved OPTION CODES 2-pole filter option Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. 58e, 2-pole filter setting 1 Hz 3 Hz 5 Hz 10 Hz 20 Hz 30 Hz 50 Hz ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -29 C to 82 C [-20 F to 180 F] Temperature, storage -40 C to 93 C [-40 F to 200 F] 100 Hz 300 Hz 500 Hz 1000 Hz 2500 Hz (350 ohm bridge) 7000 Hz (5000 ohm bridge) MOUNTING DIMENSIONS AND CHARACTERISTICS 98,5 mm [3.87 in] TRANSDUCER INTERFACE Characteristic Measure Transducer type Bridge-based sensor Transducer excitation 3 Vdc or 5 Vdc @ 30 mA (short circuit protection) AMPLIFIER CHARACTERISTICS Characteristic Measure Supply voltage 11 Vdc to 28 Vdc Current draw 60 mA Zero adjustment range, coarse 60 % Zero adjustment range, fine 10 % Span adjustment range Switch selectable 0.5 mV/V to 13.3 mV/V Span adjustment range, fine 20 % Linearity 0.01 % Output 5 Vdc Output current 2 mA Frequency response (-3 db) Rise time (0 % to 90 %) TYPICAL SYSTEM DIAGRAM Power supply dc 7000 Hz with 350 ohm bridge dc 2500 Hz with 5000 ohm bridge 56 ms with 350 ohm bridge 145 ms with 5000 ohm bridge Signal-to-noise ratio 66 db dc power supply rejection ratio Greater than 110 db Not RoHS compliant 2 Honeywell * Sensing and Control Mating connector Sensor Model DV-05 Customer supplied Chart recorder Alarm panel Data acquisition Computer PLC Model DV-05 DIN Rail Mount In-Line Amplifier Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifica- * The information presented in this datasheet is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. tions, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's test and measurement products, call +1-614-850-5000, visit http://measurementsensors. honeywell.com, or e-mail inquiries to info.tm@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA honeywell.com 008813-2-EN IL50 GLO June 2014 Copyright (c) 2014 Honeywell International Inc. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Honeywell: 060-6881-01